clutch “washer mod” or “contact button mod”. “washer mod” (30 minutes max!)
TRANSCRIPT
Clutch
“washer mod”or
“contact button mod”
“washer mod”(30 minutes max!)
No oil will leak out on removal
6mm
10mm
1/16” thick
.06mm
Stock Harley chromed washer CCI part # 35604
Washer installed
Make sure washer does not foul
rubber gasket # 2 on re- fitting
Slight gap – can affect 100th anniversary cover re-fitting
“contact button mod”
Contact button removal
• Remove snap ring # 1• Remove lifter guide # 3• Contact button is removed with # 3 as one assembly• Contact button part # is 36780-01K (cost +/- $2.60)• Remove button from lifter guide as shown in next slide• Machine .060” from the face of the large end
Tap as shown or use a brass drift