Click the pictures to advance to next slide Use the left arrow to go back. Manually place the machine on needle #1 Then turn off the machine 1. turn on the machine, While holding the Menu button, until you see the frame move screen 2. Press the set button to complete the frame move 3. Press the menu button and scroll to the other function 4. Press set and select maintenance on the list, and press set 5. Input code 2251 then press set You will see this screen with the arrow on machine 6. Press set to highlight the letter and scroll to the letter D then press set 7. Manually Move the head to needle #12 8. Scroll to the letter E and press set 9. Scroll to the letter F and press set 10. After the machine returns and you see the #12 on the screen, Manually move the head through the needles from 12 down, and watch the screen to see the #s correspond to the needles. 11. If correct, turn off machine, and restart normally. Done!