cleaning system - sle technology · sle logos 1c_2c_4c.indd 1 25.10.11 17:34. microclean compact e...
TRANSCRIPT
CLEANING
EN
CLEANING systEm
quality engineering
quality engineering
quality engineering
<– Logo 2c –>
<– Logo 4c –>
<– Logo Schrift weiss –>
SLE Logos 1c_2c_4c.indd 1 25.10.11 17:34
Microclean compact e is a high performance cleaning system for endless strips of variable widths. The system has been specifically developed for the stamping and forming technology. By means of diverse adaptations, the system can be customized at any time to suit particular applications outside this industry. The design of the system guarantees that no dirt traps can form and ensures the barrier-free flow and drain of the medium everywhere and all the time.By standard, compact e allows for deburring of stamped strips with its high-pressure cleaning and drying modules.
Technical dataDimensions LxWxH 1650 mm x 1600 mm x 2450 mmPower supply 400 V / 50 Hz, 3~, N, PE, 30 kVAAir supply 1/2“ plug connection, 6 barBasic frame Welded stainless steel frame,
other non-critical metal sur-faces are powder coated
Speed up to 10m/min., adjustable; special speeds on request
Strip widths up to 100 mm; other widths on request
CLEANING systEm
Cleaning:
- Encapsulated stainless steel cleaning chamber with integrated exhaust
- Flexible nozzle fitting for best possible adaptation to the cleaning task
Construction of system:
- Complete system made entirely of stainless steel (where it counts) with seal-welded collecting tray corresponding to relevant standards and regulations
- Components in contact with the medium are made of stainless steel or polymers
- Stainless steel drying chamber
- Use of energy efficient components, class IE2 or better
Media flow:
- Optimized media flow without formation or dirt traps
- Components suitable for demineralised water
- Differential-pressure controlled filter station with freely selectable filter properties
- Integrated, fully automatic additional cleaner dosing
- Extendable to various ways of media treatment
System control:
- Frequency-controlled drive units and pumps
- Touch-panel
- Integrated speed control
- Intuitive user interface
- Interfaces to upstream and downstream processes
- Automatic heat-up phase
Drying and exhaust:
- Energy saving blow-off drying
- Adjustable hot air nozzles
- Optional exhaust by means of vapour condenser with medium return
- Environmentally friendly closed-loop water-based cleaning process with integrated medium treatment
- Tailored adaptation to individual and highly complex cleaning tasks by modular construction
- Exceptional ease of maintenance
- Adaptations for reel-to-reel solutions avoid additional costly handling of parts. Reel-to-piece application is equally possible
bENEfIts
PErfECt soLutIoNswIthout soLutIoNs
quality engineering
quality engineering
quality engineering
<– Logo 2c –>
<– Logo 4c –>
<– Logo Schrift weiss –>
SLE Logos 1c_2c_4c.indd 1 25.10.11 17:34
Entry
Cleaning chamber
Drying chamber
Strip guidance
Exit with drive unit
quality engineering
quality engineering
quality engineering
<– Logo 2c –>
<– Logo 4c –>
<– Logo Schrift weiss –>
SLE Logos 1c_2c_4c.indd 1 25.10.11 17:34
SLE technology GmbH
Josef-Buchinger-Straße 994481 GrafenauGermany
Tel.: +49 8552 9640-0Fax: +49 8552 9640-40