Dat

a sh

eet t

k-B

C20

0, R

ev.0

, 10

-201

9

Competence in ValvesMaterials Services | Materials Germany

Technical specifications

Design2-piece, maintenance-free, full bore

Features• Blow-out-proof stem• Lockable lever in OPEN and CLOSED positions

OperationLever, turnable 90° (displaceable 90° against thestem)

ConnectionInternal thread acc. to DIN EN 10226 (DIN 2999)

Dimensions Dimension Table

Operating parametersOperating temperature -20 °C to +200 °CPressure rating PN63 from 1/4" to 2 1/2"Pressure rating PN40 at 3"

Pressure-Temperature Diagram

MaterialsBody: Stainless steel 1.4408Ball: Stainless steel 1.4408Seats: PTFEStem seal: PTFELever: Stainless steel 1.4301 with plastic sleeve

All information is non-binding!

Stainless Steel Ball Valve Classic Line Series, 2-piece (tk-BC200)

Materials Services | Materials Germany | Stainless Steel Ball Valve | tk-BC200 2

Dimensions in mm

NPS DN d L L1 H W

Breakaway Weight

[kg]

Kv value

[m³/h]Torque [Nm]

1/4" 8 11 52 10 51 96 7,8 0,2 17

3/8" 10 12 52 12 51 96 7,8 0,2 20

1/2" 15 15 55 12 53 98 6,5 0,2 31

3/4" 20 20 62 12 60 110 10,4 0,3 58

1" 25 25 74 15 66 135 10,4 0,5 94

1 1/4" 32 32 82 15 80 142 19,5 0,8 158

1 1/2" 40 38 91 15 85 173 23,4 1,1 228

2" 50 49 105 16 92 173 28,6 1,5 398

2 1/2" 65 65 144 24 125 220 49,4 3,6 720

3" 80 78 168 30 135 245 65,0 5,5 1037

1/4"– 3"

Dat

a sh

eet t

k-B

C20

0, R

ev.0

, 10

-201

9

1 1/2"–3" Hollow ball

Pos. Parts Material

1 Body 1.4408

2 Cap 1.4408

3 Ball 1.4408

4 Gasket PTFE

5 Seat PTFE

6 Thrust Washer PTFE

7 Packing PTFE

8 Gland Nut AISI 316

9 Spring Washer Stainless Steel

10 Stem AISI 316

11 Stem Nut Stainless Steel

12 Locking Device AISI 201

13 Lever 1.4301

14 Sleeve PVC

Parts List

T [°C]

T [°F]

P [bar]P

[PS

I]

Contactthyssenkrupp Schulte GmbH Subsidiary Das ArmaturenzentrumArtur-Ladebeck-Str. 11433647 BielefeldT: +49 521 1451-208 daz.ts@thyssenkrupp.com www.dasarmaturenzentrum.de

Pressure-Temperature Diagram

Materials Services | Materials Germany | Stainless Steel Ball Valve | tk-BC200 3

Note:Operation of the valve is only recommended in the area below the pressure-temperature curve and above the saturated steam curve in the diagram above. In case of deviating requirements, do not hesitate to contact us.

The valves described in this document, in the form we have supplied, are neither machines in accordance with Article 2 paragraph a nor incomplete machines according to Article 2 paragraph g in the sense of the Machinery Directive 2006/42 / EC.

Dat

a sh

eet t

k-B

C20

0, R

ev.0

, 10

-201

9