class notes; 4.26.11. work and horsepower no quiz today
DESCRIPTION
class notes; 4.26.11. Work and Horsepower NO Quiz TODAY. Personal Horsepower Lab Lab Due Wednesday Thursday More information coming tomorrow!! A couple more tickets available.-------------------- Twins Physics Day Early bus stuff Dress for the weather Leave at 8:30. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/1.jpg)
class notes; 4.26.11.
Work and Horsepower NO Quiz TODAY
Personal Horsepower Lab
Lab Due Wednesday
Thursday More information coming tomorrow!!
A couple more tickets available.--------------------
Twins Physics Day
Early bus stuff
Dress for the weather
Leave at 8:30 http://www.ftexploring.com/energy/energy-1.htm
![Page 2: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/2.jpg)
Lab is due tomorrowToday during work time
Find out answers to questions
• Reading Notes (1 page )
– Gravitational Potential Energy
• Homework:
– Physics: Work (no angles)
– Check your understanding of Potential Energy
![Page 3: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/3.jpg)
Mechanical Work Equals ZEROno change in speed no workno change in height no workForce is ┴ to motion no Work
W=F*d 1 N m = 1 Joule
• W = 0! Carrying a weight corresponds to W = 0.
• F is perpendicular to d, θ = 90°: • W = 0. IF you are pushing against an
immovable object, d =0 so W = 0!!
d =0
90°
d
F
![Page 4: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/4.jpg)
Gravitational Potential Energy
Both blocks acquire the same gravitational potential energy, mgh.
The same work is done
on each block. What matters is the final elevation, not thepath followed
![Page 5: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/5.jpg)
• The amount of work done by a force on any object is given by the equation
Work = F d cosΘ• F is the Applied force, • d is the displacement• θ is the angle between the F & d
Work = F * d Using the force and the distance along the ramp
![Page 6: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/6.jpg)
Work and Potential Energy
The work done on the ball gives the ball gravitational potential energy. Gravitational potential energy = mgh
![Page 7: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/7.jpg)
Which Path Requires the Most WORK?
• Suppose that a car traveled up three different roadways (each with varying incline angle or slope) from the base of a mountain
![Page 8: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/8.jpg)
Vertical distance only affects the PE• The PE at the top of each is 30 J,
• The work to move up each would be 30 J.
• How can this be????
• For Work use Force || to displacement!!
Fg
UPd
Fg
UPd
Fg
UPd
![Page 9: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/9.jpg)
Calculations:
![Page 10: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/10.jpg)
Watts and Horsepower• James Watt patented the
steam engine in 1769.
• To sell it, he needed to tell people how many horses it would replace.
• He measured how quickly farm horses could do work.
• There are few horses that actually produce exactly one horsepower of power.
![Page 11: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/11.jpg)
POWER
![Page 12: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/12.jpg)
![Page 13: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/13.jpg)
• Notebooks 30 pts + 5 EC for vertical loops
• More Equations and Notes today
• Tomorrow is the last day to bring in Valleyfair $$$41.50 and permission slip.
Work, Power and Energy
![Page 14: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/14.jpg)
• The baseball pitcher does work on the ball. The ball gains kinetic energy.
• To do the greatest possible amount of work, the greatest possible force
the greatest possible distance
Work: The Transfer of Mechanical Energy
![Page 15: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/15.jpg)
Kinetic energy• The amount of translational kinetic energy (from
here on, the phrase kinetic energy will refer to translational kinetic energy) which an object has depends upon two variables: the mass (m) of the object and the speed (v) of the object. The following equation is used to represent the kinetic energy (KE) of an object.
•
• where m = mass of object• v = speed of object
![Page 16: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/16.jpg)
Units of work and energy
• Like work and potential energy, the standard metric units of measurement for kinetic energy is the Joule. As might be implied by the above equation, 1 Joule is equivalent to 1 kg*(m/s)^2.
![Page 17: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/17.jpg)
Analyze the animation and use the principles of work and energy to answer the given questions.
• Use energy conservation principles to determine the speed of a 0.050-kg Hot Wheels car that descends from a height of 0.60-meters to a height of 0.00 meters. Assume negligible air resistance.
• • Use energy conservation principles to determine the speed of a
0.050-kg Hot Wheels car that descends halfway down a 0.60-meter high hill (i.e., to a height of 0.30 meters). Assume negligible air resistance.
• • If the mass of the Hot Wheels car was twice as great (0.100 kg),
then what would be the speed at the bottom of the 0.60-meter high hill?
• • If the 0.050-kg Hot Wheels car is brought to a rest over a distance
of 0.40 meters, then what is the magnitude of the frictional force acting upon the car?
![Page 18: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/18.jpg)
Which Path Requires the Most Energy?
• Suppose that a car traveled up three different roadways (each with varying incline angle or slope) from the base of a mountain
![Page 19: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/19.jpg)
Analyze the animation and use the principles of work and energy to answer the given questions.
• Use energy conservation principles to determine the speed of a 0.050-kg Hot Wheels car that descends from a height of 0.60-meters to a height of 0.00 meters. Assume negligible air resistance.
• • Use energy conservation principles to determine the speed of a
0.050-kg Hot Wheels car that descends halfway down a 0.60-meter high hill (i.e., to a height of 0.30 meters). Assume negligible air resistance.
• • If the mass of the Hot Wheels car was twice as great (0.100 kg),
then what would be the speed at the bottom of the 0.60-meter high hill?
• • If the 0.050-kg Hot Wheels car is brought to a rest over a distance
of 0.40 meters, then what is the magnitude of the frictional force acting upon the car?
![Page 20: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/20.jpg)
Work
Work = Force x Distance
F = 500 pounds (2000 N)
D = 8 feet (2.5 meters)-----------------------------------
W = 2000 N x 2.5 m
= 5000 N-m-----------------------------------Alternative unit: Joule
1 N-m = 1 joule (J)
![Page 21: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/21.jpg)
Work
Work = Force x Distance
If the wall doesn't move,the prisoner does no work.
![Page 22: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/22.jpg)
Energy
Work is done on the bow.
The work done is storedin the bow and string aselastic potential energy.
After release, the arrow issaid to have kineticenergy, 1/2 mv2.
Energy is measured in the same units (joules) as work.
![Page 23: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/23.jpg)
Energy Transformation
The work done in lifting the massgave the mass gravitationalpotential energy.
Potential energy then becomeskinetic energy.
Kinetic energy then does workto push stake into ground.
![Page 24: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/24.jpg)
Energy Transformation
![Page 25: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/25.jpg)
Power • Power = Work/ Time
1 joule / second = 1 watt
![Page 26: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/26.jpg)
Total mechanical energy
• As discussed earlier, there are two forms of PE discussed in our course - gravitational potential energy and elastic potential energy. Given this fact, the above equation can be rewritten:
• TME = PEgrav + PEspring + KE
![Page 27: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/27.jpg)
TotalMechanical
energy stays the
same until it hits the water.
![Page 28: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/28.jpg)
Work and EnergyHow High Will It Go?
The motion of the sled in the animation below is similar to the
motion of a roller coaster car on roller coaster track. • As on a roller coaster, energy is transformed from potential
energy to kinetic energy and vice versa. Provided that external forces (such as friction forces and applied forces) do not do work, the total amount of mechanical energy will be held constant.
![Page 29: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/29.jpg)
Energy Conservation on an Incline
• If air resistance is neglected, then it would be expected that the total mechanical energy of the cart would be conserved. The animation below depicts this phenomenon (in the absence of air resistance).
•
![Page 30: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/30.jpg)
Total mechanical energy is constantconservative force
gravity transfers PE-KE• The diagram below depicts the motion of Li
Ping Phar (esteemed Chinese ski jumper) as she glides down the hill and makes one of her record-setting jumps.
![Page 31: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/31.jpg)
Measurement of Horsepower• The maximum horsepower
developed by a human being over a few seconds time can be measured by timing a volunteer running up the stairs in the lecture hall.
• If a person of weight W runs up height h in time t, then h.p. = Wh/t X 1/550 ft-lbs/sec.
• A person in good shape can develop one to two horsepower. It will be entertaining to the students if the professor tries it too.
• Should the person be allowed a running start?
http://www.physics.ucla.edu/demoweb/demomanual/mechanics/energy/faith_in_physics_pendulum.html
http://www.physics.ucla.edu/demoweb/demomanual/mechanics/uniform_circular_motion/index.html
![Page 32: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/32.jpg)
Height at A = 60m The car's mass is 500kg.
• A roller coaster with two loops and a small hill, see diagram below
• In the diagram A is the highest point of the coaster, B is 3/4 height of A, C is 1/2 of A, D is 1/4 of A, E is the ground level, and F is 1/8 of A.
Point (A-F)
Height(m)
PE(J)
KE(J)
TME(J)
Speed (m/s)
![Page 33: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/33.jpg)
PE = mgh
Speed use KE = ½ m v2 KE = TME (previous) – PE
AtoF
h (m)
PE(J)
KE(J)
TME(J)
Speed (m/s)
A 60 (500(9.8)(60) = 294,000-294,000=
294,000 J 0 Joules 294,000J 0 m/s
B 45
C 30
D 15
E 0
F 7.5
HA = 60m m =500kg
PE = mgh
KE = ½ m v2
![Page 34: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/34.jpg)
HA = 60m m =500kg
PE = mgh
Speed use KE = ½ m v2 KE = TME (previous) – PE
AtoF
h (m)
PE(J)
KE(J)
TME(J)
Speed (m/s)
A 60 (500(9.8)(60) = 294,000-294,000=294,000 J 0 Joules 294,000J 0 m/s
B 45 (500(9.8)(45) = 294,000-220,500 = 294,000J220,500 J 73,500J 17.1 m/s
Equation: KE = ½ m v2
Substitute: 73,500J = ½ 500kg v2
X 2 …/ by 500…take √ .. v= 17.1 m/s
![Page 35: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/35.jpg)
Mechanical Energy Equations
Page 7 section #3
![Page 36: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/36.jpg)
W1
W2W4
W1Force of Gravity pulls down
Mechanical Work PE KE
TME does not change
W4
![Page 37: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/37.jpg)
The transfers of energy
during the 1st Bounce
W1
W2W4
W3
![Page 38: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/38.jpg)
W1
W2W4
W2Force of Gravity pulls down
Mechanical Work PE KE
TME does not change
W3
![Page 39: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/39.jpg)
W1
W4
W3ball compressed
Mechanical Energy lost to HEAT
TME does change
W2
W3
![Page 40: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/40.jpg)
W1
W3
W4Force of Gravity pulls downMechanical Work KE PE
TME does not change
W2W4
![Page 41: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/41.jpg)
Notice the speed change
![Page 42: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/42.jpg)
![Page 43: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/43.jpg)
Missing mechanical energy??
Energyinitial – Energyfinal = Energylost
![Page 44: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/44.jpg)
Frictional Work• According to the
Cedar Point website the maximum speed of the Magnum XL-200 is 72 mph not 76 mph as we calculated above.
• The difference is due to frictional forces acting on the roller coaster cars.
• Assuming that the mass of a loaded roller coaster car is 600 kg what is the frictional (non-conservative) work done on the car by the track?
![Page 45: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/45.jpg)
Analyze the transfers of
energy during the 1st
Bounce
![Page 46: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/46.jpg)
Work on incline
• Answer the following about the above picture: • Draw the three forces acting on the object. • If the object slides down the incline, what work
was done with gravity? • What work is done against the motion? • What is the net work done? • Predict the final velocity of the object.
![Page 47: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/47.jpg)
Mechanical Energy
![Page 48: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/48.jpg)
![Page 49: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/49.jpg)
![Page 50: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/50.jpg)
![Page 51: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/51.jpg)
Follow the bouncing ball
![Page 52: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/52.jpg)
![Page 53: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/53.jpg)
Bouncing balls
• • When a ball is dropped, it transfers its GPE to
kinetic energy. As the ball hits the floor, its kinetic energy is turned into elastic potential energy (and some heat, and noise). High speed photography can show how the ball gets deformed.
• The elastic potential energy is transferred to kinetic energy as the ball bounces. Some energy is lost as heat as the ball bounces, so it does not achieve the height from which it was dropped.
![Page 54: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/54.jpg)
Bouncing balls
• different types of balls at room temperature and when they are frozen.
• When a ball is dropped on a surface, molecules in the ball can deform or absorb the kinetic energy of the fall. If they return to their original shape they push the ball away from the surface. If the energy is absorbed, the ball does not bounce.
![Page 55: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/55.jpg)
Bouncing balls
![Page 56: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/56.jpg)
Bouncing balls
![Page 57: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/57.jpg)
![Page 58: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/58.jpg)
![Page 59: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/59.jpg)
Conservative and non-conservative work
• Forces can be categorized as internal forces or external forces. There are many sophisticated and worthy ways of explaining and distinguishing between internal and external forces. Many of these ways are commonly discussed at great length in physics textbooks. For our purposes, we will simply say that external forces include the applied force, normal force, tension force, friction force, and air resistance force. And for our purposes, the internal forces include the gravity forces, magnetic force, electrical force, and spring force.Internal Forces External Forces
Fgrav
Fspring
Fapp
Ffrict
Fair
Ftens
Fnorm
![Page 60: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/60.jpg)
• Description of Motion KE to PE or PE to KE? Explain.
• 1. A ball falls from a height of 2 meters in the absence of air resistance.
• • 2.A skier glides from location A to location B across a friction free
ice.
• • 3.A baseball is traveling upward towards a man in the bleachers.
• • 4.A bungee cord begins to exert an upward force upon a falling
bungee jumper.
• • 5.The spring of a dart gun exerts a force on a dart as it is
launched from an initial rest position.
In the following descriptions, the only forces doing work upon the objects are internal forces - gravitational and spring forces. Thus, energy is transformed from KE to PE (or vice versa) while the total amount of mechanical energy is conserved. Read each description and indicate whether energy is transformed from KE to PE or from PE to KE.
![Page 61: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/61.jpg)
The following descriptions involve external forces (friction, applied, normal, air resistance and tension forces) doing work upon an object. Read the description
and indicate whether the object gained energy (positive work) or lost energy (negative work). (NOTE: If this is part is difficult, review the section on work.) Then, indicate whether the gain or loss of energy resulted in a change in the
object's kinetic energy, potential energy, or both. Click the buttons to view answers.
Description + or - Work? Change PE or KE or Both?
• Megan drops the ball and hits an awesome forehand. The racket is moving horizontally as the strings apply a horizontal force while in contact with the ball.
• A tee ball player hits a long ball off the tee. During the contact time between ball and bat, the bat is moving at a 10 degree angle to the horizontal.
• • Rusty Nales pounds a nail into a block of wood. The hammer head is
moving horizontally when it applies force to the nail.
• The frictional force between highway and tires pushes backwards on the tires of a skidding car.
• A diver experiences a horizontal reaction force exerted by the blocks upon her feet at start of the race.
• A weightlifter applies a force to lift a barbell above his head at constant speed.
![Page 62: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/62.jpg)
Work out due to friction
![Page 63: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/63.jpg)
Mechanical Energy Equations
6th section
![Page 64: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/64.jpg)
A boulder resting at the top of a hill has
potential energy.
![Page 65: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/65.jpg)
Potential energy changes to kinetic energy due to work done by gravity
PE
![Page 66: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/66.jpg)
Roller coaster W/P/E
• The Work pulling the coaster to the top of the 1st hill is the Potential Energy at the top of the hill and the Energy available for the entire ride.
• The total mechanical energy at any point of the roller coaster is the PE + KE if there were no frictional forces
KEinitial + PEinitial + Wexternal = KEfinal + PEfinal
![Page 67: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/67.jpg)
Energy Transformation on a Roller Coaster
A GIF Animation
![Page 68: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/68.jpg)
A roller coaster ride also illustrates the work-energy
theorem. • The theorem is often stated in the form of the
following mathematical equation.• KEinitial + PEinitial + Wexternal = KEfinal + PEfinal
• The left side of the equation includes the total mechanical energy (KEinitial + PEinitial) for the initial state of the object plus the work done on the object by external forces (Wexternal) while the right side of the equation includes the total mechanical energy (KEfinal + PEfinal) for the final state of the object.
![Page 69: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/69.jpg)
A roller coaster ride also illustrates the work-energy
theorem.
• KEinitial + PEinitial + Wexternal = KEfinal + PEfinal
![Page 70: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/70.jpg)
Frictional Work
• Frictional Work• According to the
Cedar Point website the maximum speed of the Magnum XL-200 is 72 mph not 76 mph as we calculated above. The difference is due to frictional forces acting on the roller coaster cars. Assuming that the mass of a loaded roller coaster car is 600 kg what is the frictional (non-conservative) work done on the car by the track?
![Page 71: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/71.jpg)
Test Form AMass = 800 kgTest Form B
• 1. Find the Total Mechanical Energy at the end of the first horizontal platform.
• 2. Find the Acceleration on platform
• vf 2= vi 2 + 2 a d• Then Find g’s
• 6. radius = 30 meters
![Page 72: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/72.jpg)
Height at A = 60m• a roller coaster with two loops and a small hill, see
diagram below• In the diagram A is the highest point of the
coaster, B is 3/4 height of A, C is 1/2 of A, D is 1/4 of A, E is the ground level, and F is 1/8 of A. The car's mass is 500kg.
Point Height(m) PE(J) KE(J) TME(J) Speed (m/s)
![Page 73: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/73.jpg)
coaster
![Page 74: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/74.jpg)
![Page 75: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/75.jpg)
Roller coaster W/P/E• The Work pulling the coaster to the top of the
1st hill is the Potential Energy at the top of the hill and the Energy available for the entire ride.
• The Total Mechanical Energy at any point of the roller coaster is the PE + KE if there were no frictional forces
KEinitial + PEinitial + Wexternal = KEfinal +PEfinal
![Page 76: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/76.jpg)
Energy Transformation on a Roller Coaster
A GIF Animation
![Page 77: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/77.jpg)
Height at A = 60m The car's mass is 500kg.
• A roller coaster with two loops and a small hill, see diagram below
• In the diagram A is the highest point of the coaster, B is 3/4 height of A, C is 1/2 of A, D is 1/4 of A, E is the ground level, and F is 1/8 of A.
Point (A-F)
Height(m)
PE(J)
KE(J)
TME(J)
Speed (m/s)
![Page 78: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/78.jpg)
PE = mgh
Speed use KE = ½ m v2 KE = TME (previous) – PE
AtoF
h (m)
PE(J)
KE(J)
TME(J)
Speed (m/s)
A 60 (500(9.8)(60) = 294,000-294,000=
294,000 J 0 Joules 294,000J 0 m/s
B 45
C 30
D 15
E 0
F 7.5
HA = 60m m =500kg
PE = mgh
KE = ½ m v2
![Page 79: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/79.jpg)
HA = 60m m =500kg
PE = mgh
Speed use KE = ½ m v2 KE = TME (previous) – PE
AtoF
h (m)
PE(J)
KE(J)
TME(J)
Speed (m/s)
A 60 (500(9.8)(60) = 294,000-294,000=294,000 J 0 Joules 294,000J 0 m/s
B 45 (500(9.8)(45) = 294,000-220,500 = 294,000J220,500 J 73,500J 17.1 m/s
Equation: KE = ½ m v2
Substitute: 73,500J = ½ 500kg v2
X 2 …/ by 500…take √ .. v= 17.1 m/s
![Page 80: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/80.jpg)
800 kg
h (m)
Speed m/s
PE(J)
KE(J)
TME(J)
80 m 10 m/s800(9.8)(80)=
627,200 J½ (800)(10)2=
40,000 J 667,200 J
Top of 1st hill (Need to first find the TME available)
TME = KE + PE
PE = mgh KE = ½ m v2
![Page 81: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/81.jpg)
800 kg
h (m)
Speed m/s
PE(J)
KE(J)
TME(J)
0 m ?? 0 J 667,200 J 667,200 J
Speed at the bottom of the 1st hill
TME = KE + PEStays same if no
friction
PE = mgh KE = ½ m v2
![Page 82: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/82.jpg)
800 kg
h (m)
Speed m/s
PE(J)
KE(J)
TME(J)
0 m 40.8 0 J 667,200 J 667,200 JSpeed at the bottom of the 1st hill
TME = KE + PE
Equation: KE = ½ m v2
Substitute: 667,200 J= ½ 800kg v2
X 2 …/ by 800…take √ .. v= 40.8 m/s
![Page 83: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/83.jpg)
Coaster g’s Back side: Save for tomorrow
![Page 84: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/84.jpg)
Weight Equation
![Page 85: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/85.jpg)
A boulder resting at the top of a hill has
potential energy.
![Page 86: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/86.jpg)
Potential energy changes to kinetic energy due to work done by gravity
PE
![Page 87: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/87.jpg)
Use:
To convert from Newtons to kg
And from kg to Newtons
![Page 88: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/88.jpg)
The Total Mechanical Energy• As already mentioned, the mechanical energy of an object can
be the result of its motion (i.e., kinetic energy) and/or the result of its stored energy of position (i.e., potential energy). The total amount of mechanical energy is merely the sum of the potential energy and the kinetic energy. This sum is simply referred to as the total mechanical energy (abbreviated TME).
• TME = PE + KE
• As discussed earlier, there are two forms of potential energy discussed in our course - gravitational potential energy and elastic potential energy. Given this fact, the above equation can be rewritten:
• TME = PEgrav + PEspring + KE
![Page 89: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/89.jpg)
![Page 90: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/90.jpg)
Mechanical Energy as the Ability to Do Work
![Page 91: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/91.jpg)
Sample PE calculation
![Page 92: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/92.jpg)
A boulder resting at the top of a hill has
potential energy.
Gravitational Potential
Energy is the energy
stored due to height.
Work can change the
height of the Boulder
Work can change the
potential energy of the
Boulder
![Page 93: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/93.jpg)
Potential energy changes to kinetic energy due to work done by gravity
PE
![Page 94: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/94.jpg)
4.17.09.notes
WPE Introduction & Equation sheet
Hand in Valley Fair $$ and slip
Lab Question: Who had the highest
Horsepower??You may turn Lab in today or Monday….
1st 0.73 Mike
3rd 0.95 Joey
4th 0.88 Parker
5th 1.01 Chris
6th 0.91 Seth
![Page 95: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/95.jpg)
WPE Introduction 4-17-09TODAY: Notes and Equation Sheet
Valleyfair:
Friday, May15th --Passing by Friday 5pm
Cash By 7:30 am Friday May 15th
Book notes Pg. 224-231 ½ page
![Page 96: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/96.jpg)
New sheet Mechanical Work Equations
in any directionPage 7 section #1
![Page 97: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/97.jpg)
![Page 98: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/98.jpg)
To Do Work, Forces Must Cause Displacements
• To Do Work, Forces Must Cause Displacements• Let's consider Scenario C above in more detail. Scenario C involves a situation similar to the
waiter who carried a tray full of meals above his head by one arm straight across the room at constant speed. It was mentioned earlier that the waiter does not do work upon the tray as he carries it across the room. The force supplied by the waiter on the tray is an upward force and the displacement of the tray is a horizontal displacement. As such, the angle between the force and the displacement is 90 degrees.
![Page 99: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/99.jpg)
Mechanical Work Equations
5th section
Page 7 section #2
![Page 100: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/100.jpg)
Who or What is applying the Force??
![Page 101: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/101.jpg)
Mechanical work
and Energy work is done upon an
object whenever
a force acts upon it and
changes the height or
changes the speed
![Page 102: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/102.jpg)
The amount of work done is dependent height
![Page 103: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/103.jpg)
A boulder resting at the top of a hill has
potential energy.
• Gravitational Potential
Energy is the energy stored due to height.• Work can change the
height of the Boulder
• Work can change the
potential energy of the
Boulder
![Page 104: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/104.jpg)
Mechanical Energy Equations
Page 7 section #3
![Page 105: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/105.jpg)
Horizontal displacement does not affect the gravitational PE
• Knowing that the potential energy at the top of the tall pillar is 30 J, what is the potential energy at the other positions shown on the hill and the stairs.
![Page 106: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/106.jpg)
Assignment4.17.09
Lab report
due MONDAY
NOTEBOOK:
Book notes Pg. 224-231 (½ page)
![Page 107: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/107.jpg)
Work and Energy ProblemsWork and energy are Scalar, so we do not use +/- on numbers for direction
Potential energy
(height)
Work Kinetic energy
(speed)
![Page 108: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/108.jpg)
Work and Energy ProblemsWork and energy are Scalar, so we do
not use +/- on numbers for directionPE = mgh W=F*d KE = 1/2 mv2
![Page 109: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/109.jpg)
• A ball starts from rest on top of a tall pillar and falls to the ground below. Assume the effect of air resistance is negligible.
• PEi = KEf
• (Since initially at rest, KEi = 0 and cancels. Since the final height is 0, PEf = 0 and cancels.)
![Page 110: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/110.jpg)
6. A 50-kg platform diver hits the water below with a kinetic energy of 5000 Joules. The height (relative to the water) from which the diver dove
was approximately ____ meters.*the potential energy change
*the work done.
5000 J
5000 J
Example from
![Page 111: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/111.jpg)
Work and Energy ProblemsWork and energy are Scalar, so we do
not use +/- on numbers for directionPE = mgh
PE = 5000J
5000J=50(9.8)h
h=5000 /490
h= 10.2 m
• W=F*d
• W = 5000 J transferring
PE to KE
• KE = 1/2 mv2
• KE = 5000 J
![Page 112: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/112.jpg)
Example from
7. Using 1000 J of work, a small object is lifted from the ground floor to the third floor of a tall building in 20 seconds. What power was required in this task?
• the potential energy change
• the work done
• the power delivered
![Page 113: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/113.jpg)
Work and Energy ProblemsWork and energy are Scalar, so we do
not use +/- on numbers for direction• PE = mgh
• PE = 1000J
• W=F*d
• W = 1000 J transferred
to PE
• KE = 1/2 mv2
P=W/t
P=1000J / 20sec=50 Watts
![Page 114: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/114.jpg)
4.20.09 notes
Work, Potential Energy & Problems
NOW. . . . . Hand in Personal Horsepower Lab by 2:15
Hand in Valleyfair $$ and Slips together by 2:15
hOMEWORK Worksheet
Work time
![Page 115: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/115.jpg)
A boulder resting at the top of a hill has
potential energy.
• Gravitational Potential
Energy is the energy stored due to height.• Work can change the
height of the Boulder
• Work can change the
potential energy of the
Boulder
![Page 116: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/116.jpg)
Potential energy changes to kinetic energy due to work done by gravity
PE
![Page 117: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/117.jpg)
Work to PEor PE to work
• a force acts upon it and changes the height
![Page 118: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/118.jpg)
Measurement of Horsepower• The maximum horsepower
developed by a human being over a few seconds time can be measured by timing a volunteer running up the stairs in the lecture hall.
• If a person of weight W runs up height h in time t, then h.p. = Wh/t X 1/550 ft-lbs/sec.
• A person in good shape can develop one to two horsepower. It will be entertaining to the students if the professor tries it too.
• Should the person be allowed a running start?
http://www.physics.ucla.edu/demoweb/demomanual/mechanics/energy/faith_in_physics_pendulum.html
![Page 119: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/119.jpg)
A bouncing basketball captured with a stroboscopic flash at 25 images per second. Ignoring air resistance, the square root of the ratio of the height of one bounce to that of the preceding bounce
gives the coefficient of restitution for the ball/surface impact.
![Page 120: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/120.jpg)
Bouncing of ball
• The relative bounciness of different types of balls
• If a soccer ball is dropped on a hard surface, it will bounce back to a height lower than its initial position. Such kind of motion is called the bouncing of the soccer ball, which plays an important role in the motion of the ball. Let us study the mechanism of the bouncing of the ball in details.
![Page 121: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/121.jpg)
• The coefficient of restitution is how you quantify bounciness or give bounciness a number, and you do that by dividing the bounce height by the drop height, then finding the square root of that. When...
Read more: http://wiki.answers.com/Q/What_is_the_Coefficient_of_Restitution_of_bouncing_a_basketball#ixzz1JW73FiKE
![Page 122: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/122.jpg)
• As a result, a ball with smaller coefficient of restitution rebounds to lower height in successive bounces and a shorter time is required for the ball to stop.
• For example, grass reduces the coefficient of restitution of a soccer ball since the bending of blades causes further loss of its kinetic energy.
• Therefore, it would take a shorter time for the soccer ball to stop if it is kicked on grass instead of hard floor.
![Page 123: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/123.jpg)
![Page 124: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/124.jpg)
changing its temperature.• We can also change the bounciness of a ball by changing its
temperature. Take two baseballs that bounce to about the same height. Put one in the freezer for an hour and leave the other at room temperature. Then compare their bounciness again. You should notice that the room temperature ball bounces a little bit higher. The cold ball would bounce about 80 percent as high as the room temperature ball. Although the difference of bounciness is not dramatic, it's enough to see that temperature can be a factor: it could make the difference between a home run and a pop fly.
• However, the change in bounciness due to the change in temperature is taken for granted for some sport. For example, squash player rely on the pre-game warm up to warm up the ball as well as the players.
![Page 125: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/125.jpg)
Surface bounced on
• Example…grass reduces the coefficient of restitution of a soccer ball since the bending of blades causes further loss of its kinetic energy. Therefore, it would take a shorter time for the soccer ball to stop if it is kicked on grass instead of hard floor.
![Page 126: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/126.jpg)
COR
• Coefficient of restitution of a tennis ball is 0.712. Thanks ...
![Page 127: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/127.jpg)
• 1910 soccer ball [ii] 1950 soccer ball [ii] 2004 Euro Cup ball [ii]
• In the late 1980s, the leather casing ball was replaced by totally synthetic ball in soccer competitions. The covering material of the totally synthetic ball is synthetic leather made from polymer. For high quality ball, the casing is made of the synthetic leather panels stitched together through pre-punched holes by waxed threads. The bladder of a totally synthetic ball is usually latex or butyl bladder. The ball is then inflated by pumping air into its bladder through a tiny hole on the casing. The totally synthetic ball could resist water absorption and reliably maintain its shape.
• The Internal structure of a totally synthetic soccer ball [ii]
• Nowadays, the official soccer rules called the "Laws of the game", which are maintained by the International Football Association Board (IFAB), specify the qualities of the ball used in soccer matches. According to the laws, the soccer ball should satisfy the following descriptions:
• it is spherical in shape, • its casing is made of either leather or other suitable material, • its circumference is not more than 70 cm and not less than 68 cm, • its weight is not more than 450 g and not less than 410 g at the start of the match. • its pressure inside equal to 0.6 - 1.1 atmosphere at sea level.
1910 soccer ball [ii]
1950 soccer ball [ii]
2004 Euro Cup ball [ii]
![Page 128: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/128.jpg)
Figure explaining the extra pressure inside the soccer ball.
![Page 129: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/129.jpg)
The relative bounciness of different types of balls [iii]
![Page 130: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/130.jpg)
• Energy change in the falling ball after release until hitting on the ground.(Note that here "G.P.E." and "K.E." stand for the gravitational potential energy and kinetic energy respectively.)
![Page 131: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/131.jpg)
Work must be done in order to distort an elastic object
• . Therefore, if you pull a spring outward so that it become longer, some energy must have been transferred from yourself to the spring. The energy stored in an distorted object due to its deformation is called the elastic potential energy. So, when talking about the elasticity of the ball, we are indeed talking about the spring-like behavior of the ball. In other words, we are considering the tendency of the ball to return to its original spherical shape when it is being squeezed. Where does the elasticity of the ball come from? The elasticity of a solid ball arises from the elasticity of the constituting material which is due to the interatomic or intermolecular force inside. In contrast, for air-filled ball like soccer ball, its elasticity is resulted from the extra air pressure inside the ball. What happens to a ball after you dropped it above a hard floor? The gravity pulls the ball toward the ground and thus the ball falls leading to the lost of its gravitational potential energy. By the law of conservation of energy, the ball must gain kinetic energy and so it falls towards the ground with an increasing speed. Subsequently, the ball hits the hard floor with a high speed. (Note that the ball always moves with the downward acceleration of g = 9.8 m/s2 as it falls.)
![Page 132: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/132.jpg)
The elasticity of an object means
• the tendency of the object to return to its equilibrium shape, the natural shape of the object with no net force applied on it, when it is being deformed. And the force for the object to restore to its equilibrium shape is called the restoring force, which is always directed in opposite to the deformation of the object. Almost all real rigid body are elastic, i. e. having certain extent of elasticity. A trivial example of an elastic object is the spring. You probably have the experience that a spring would tend to restore to its original size when you stretch it to be longer. Scientist found that, providing the deformation is not too large, the relationship between the distortion and the restoring force is given by the Hooke's law:"The restoring force exerted by an elastic object is proportional to how far it has been distorted from its equilibrium shape." The restoring force Fs on a spring in case of different extension.
![Page 133: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/133.jpg)
• In the law of conservation of energy, it was stated that:"Energy can neither be created or destroyed but can only be changed from one form to another."Therefore, the amount of total energy in an isolated system must be constant. For example, let us consider a piece of charcoal placed in an isolated room. If we burn the charcoal, the chemical energy inside the charcoal is changed into the thermal energy of the room. Then the temperature inside the room would be increased. When the ball hits the ground, the ball exerts force on it. By the Newton's 3rd law of motion, the ground exerts a force on the ball as well. The motion of the ball would be stopped by the (stationary) hard floor resulting in the compression of the ball. So the work done on the ball leads to the increase of the elastic potential energy of the ball. That means some of the kinetic energy of the ball (which is converted from the gravitational potential energy of the ball) is converted into the elastic potential energy when the ball hits the ground. On the other hand, some of the kinetic energy is lost as thermal energy during the impact due to either the internal friction of the ball or the heating of the surface.
• Energy change in the falling ball during the impact
Law of conservation of energy
![Page 134: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/134.jpg)
After losing all the kinetic energy, the ball becomes momentarily at
rest.• The squashed ball would simply act like a compressed spring. The
ball pushes the ground with a restoring force proportional to its displacement from the equilibrium position (Hooke's law). In consequence, the ground pushes back the ball with a force of equal magnitude but opposite in direction. Thus the ball bounces back in upward direction. During the rebound, the stored elastic potential energy is released as the kinetic energy of the ball which is then converted to gravitational potential energy as the ball moves up. Moreover, some of the elastic potential energy is lost again due to friction or heat which results in slight heating of the ball. The ball keeps on going upward until it comes to rest after losing all its kinetic energy again. Due to the lost of some of the initial gravitational potential energy into thermal energy, the ball cannot bounce back to the original height.
![Page 135: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/135.jpg)
What is the Coefficient of Restitution?
(also called: Elastic Coefficient)
What is the slope of each of the graphs?• Use the slope of the graphs to find the
Coefficient of Restitution, just like we did for the Spring Constant.
• The Coefficient of Restitution tells us how “springy” the ball is.
• The slope of the graph represents this constant. The constant will be the same for a given ball.
![Page 136: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/136.jpg)
PE Bouncing Ball Lab
Work and Potential Energy and Problems
Patterns in graphs
Increasing/decreasing/ no change
Linear or curved line of best fit.
![Page 137: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/137.jpg)
Bouncing ball labmeasure height at the first bounce up
and the second bounce
![Page 138: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/138.jpg)
Work to PEor PE to work
• a force acts upon it and changes the height
![Page 139: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/139.jpg)
Measurement of Horsepower• The maximum horsepower
developed by a human being over a few seconds time can be measured by timing a volunteer running up the stairs in the lecture hall.
• If a person of weight W runs up height h in time t, then h.p. = Wh/t X 1/550 ft-lbs/sec.
• A person in good shape can develop one to two horsepower. It will be entertaining to the students if the professor tries it too.
• Should the person be allowed a running start?
http://www.physics.ucla.edu/demoweb/demomanual/mechanics/energy/faith_in_physics_pendulum.html
![Page 140: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/140.jpg)
Bouncing Ball
![Page 141: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/141.jpg)
Bouncing a Ball
• What you need:• a tennis ball• a basketball• a room without breakables
• Instructions:Drop the tennis ball from waist height and see how high it bounces.Drop the basketball from the same height and see how high it bounces.Put the tennis ball on top of the basketball and drop them both at arms length from waist height.
• Results & Explanation:The tennis ball should bounce a lot higher than before. When the balls hit the ground, momentum from the basketball was transferred to the tennis ball making it go much higher than before.
![Page 142: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/142.jpg)
![Page 143: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/143.jpg)
![Page 144: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/144.jpg)
![Page 145: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/145.jpg)
![Page 146: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/146.jpg)
![Page 147: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/147.jpg)
![Page 148: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/148.jpg)
![Page 149: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/149.jpg)
Mechanical Work Equals ZEROno change in motion no workForce is ┴ to motion no Work
W=F*d 1 N m = 1 Joule
• W = 0! Carrying a weight corresponds to W = 0.
• F is perpendicular to d, θ = 90°: • W = 0. IF you are pushing against an
immovable object, d =0 so W = 0!!
d =0
90°
d
F
![Page 150: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/150.jpg)
Which Path Requires the Most Energy?
• Suppose that a car traveled up three different roadways (each with varying incline angle or slope) from the base of a mountain
![Page 151: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/151.jpg)
Vertical distance only affects the PE• The PE at the top of each is 30 J,
• The work to move up each would be 30 J.
• How can this be????
• For Work use Force || to displacement!!
Fg
UPd
Fg
UPd
Fg
UPd
![Page 152: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/152.jpg)
• The amount of work done by a force on any object is given by the equation
Work = F d cosΘ• F is the Applied force, • d is the displacement• θ is the angle between the F & d
Work = F * d Using the force and the distance along the ramp
![Page 153: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/153.jpg)
Force not in same direction as displacement:
we use the component in the direction of the motion
![Page 154: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/154.jpg)
Concepts Involving
Work
• Let be an unbalanced force applied to an object, and let d be a resulting displacement.
Work = F * d * cos Θ
F || = F * cos Θ
If F|| is the component of F along d, then the WORK done by F, is given by W = F|| x d
Work = F * cos Θ * d
![Page 155: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/155.jpg)
Work is of the nature of a force times a distance !
Work = F║ d
But if Force not Parallel to motion:
Work done by a force parallel to the displacement is Work = F d cos Θ
![Page 156: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/156.jpg)
Add Mechanical Work Equations
Page 7 section #1
![Page 157: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/157.jpg)
Work on incline
• Answer the following about the above picture: • Draw the three forces acting on the object. • If the object slides down the incline, what work
was done with gravity? • What work is done against the motion? • What is the net work done? • Predict the final velocity of the object.
![Page 158: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/158.jpg)
![Page 159: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/159.jpg)
Units of Work
• Whenever a new quantity is introduced in physics, the standard metric units associated with that quantity are discussed. In the case of work (and also energy), the standard metric unit is the Joule (abbreviated J). One Joule is equivalent to one Newton of force causing a displacement of one meter. In other words,
• The Joule is the unit of work.• 1 Joule = 1 Newton * 1 meter• 1 J = 1 N * m• In fact, any unit of force times any unit of displacement is equivalent
to a unit of work. Some nonstandard units for work are shown below. Notice that when analyzed, each set of units is equivalent to a force unit times a displacement unit.
•
![Page 160: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/160.jpg)
![Page 161: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/161.jpg)
• A trolley of mass 10 kg is pulled along the floor. The pulling force is 36 N, at an angle of 30 above �the horizontal. Ignore friction.
• • What other forces are acting on the trolley? • Gravity and normal reaction force. • What is the total vertical force acting on the trolley? Why can we say this? • Zero. • No vertical motion zero vertical acceleration � � Fy = 0. • What is the magnitude of the normal force? • The vertical forces are gravity, the normal force, and the vertical component of the pulling force. • Let's find the horizontal and vertical components of the pulling force: •
Px = P cosq = 36 cos30 = 31 N Py = P sinq = 36 sin30 = 18 N
• The gravitational force (ie the weight of the trolley) is: w = mg = 10 ×9.8 = 98 N
• Now we either say that the total vertical force is zero: Fy = w + N + Py 0 = -98 + N + 18 80 N = N or we can say that the forces up equal the forces down (but be careful with sign and direction!) up = down N + Py = w N + 18 = 98 N = 80 N
• What is the total force acting on the trolley? • The vertical forces add to zero, the total force must be the horizontal pulling force, equal to 31 N
horizontally. • What is the acceleration of the trolley? •
F = ma 31 = 10 a 3.1 m/s2 = a • The acceleration is 3.1 m/s2 horizontally, in the direction the trolley is being pulled.
![Page 162: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/162.jpg)
![Page 163: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/163.jpg)
diagram showing the forces acting on a block that is
resting on an inclined plane
![Page 164: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/164.jpg)
Measuring the coefficient of friction on a flat surface
![Page 165: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/165.jpg)
Measuring the coefficient of friction on an inclined surface.
http://en.wikibooks.org/wiki/How_To_Build_a_Pinewood_Derby_Car/Physics
![Page 166: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/166.jpg)
FRICTION VS. PULLING ANGLE• PURPOSE: To demonstrate how pulling angle affects the frictional
force, and to show that the minimum force required to pull an object occurs when pulling at the angle of repose a, where the coefficient of friction u=tana.
• DESCRIPTION: A wooden board of weight w, lying on a sandpaper surface, is pulled at an angle a by a string connected to a spring scale. The force F required to move the board is given by: F = w / [ (1/u)cosa + sina]. Differentiating F with respect to a, the minimum force is seen to occur at the angle of repose, u=tana. Pulling horizontally is definitely not the most efficient angle!
• SUGGESTIONS: Pull horizontally to determine u, then check the angle of repose by tilting the sandpaper surface. Then pull at a variety of angles to demonstrate that pulling at the angle of repose requires the least force.
![Page 167: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/167.jpg)
![Page 168: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/168.jpg)
Moving objects can do work (bowling ball displaces pins; hammer pushes in nail; car
creams cow) energy of motion = kinetic energy.
Energy is the ability to do work
• Suppose a "bullet" of mass m moving at vo mushes into a block of soft clay and experiences a constant force F (decelerating at a constant rate, a).
•
• The force required to slow down the bullet is F = ma, where a is the deceleration. The work done through the distance s, W = Fs = mas.
• During the deceleration, v2 = vo2 + 2as; or as = 1/2(v2 - vo2)
• or Work done ON OBJECT = . (would get same result for non-constant F and a).
![Page 169: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/169.jpg)
Potential energy changes to kinetic energy due to work done by gravity
PE
![Page 170: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/170.jpg)
A boulder resting at the top of a hill has
potential energy.
• Gravitational Potential
Energy is the energy stored due to height.• Work can change the
height of the Boulder
• Work can change the
potential energy of the
Boulder
![Page 171: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/171.jpg)
Example: PEKE
• You are standing on the edge of a cliff and decide to push a rock that has a mass of 2kg off the edge with your foot. Using conservation of mechanical energy, determine how fast the rock is going just before it impacts the ground 75m below. Assume that there is no air resistance. If you dropped a 20kg rock from the same spot would the velocity be the same?
![Page 172: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/172.jpg)
Driver’s Training and braking
• Speed of a car increased by 50%. By what factor will minimum braking distance be increased (ignore reaction time)?
• Braking force same. Therefore:
• Distance = 2.25times original
![Page 173: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/173.jpg)
Mechanical Energy: traditional definition = the ability to do work.
Work done in stopping a car:
![Page 174: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/174.jpg)
The mechanical work done on the object = the
change in kinetic energy;
If W is positive, KE increases; IF W is negative, KE decreases.
-- often called Work-Energy Theorem (Net work done = change in kinetic energy
![Page 175: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/175.jpg)
Work done by gravity• Suppose a car of mass 1200 kg falls vertically a distance
of 24 m (starting from rest; i.e., voy = 0). • (a) What is the work done by gravity on the car? • Fgrav = mg; Dy = 24 m; Force and displacement in same
direction (down).
• Fgrav = Fnet
• because gravity is only force acting on car.
![Page 176: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/176.jpg)
Using Work-Energy Theorem• (b) Find final velocity of car.
• Using constant acceleration (g):
• Using Work-Energy Theorem:
•
•
• Plug in: v = 22 m/s.
![Page 177: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/177.jpg)
A mass m is moving in a straight line at velocity vo. It comes into contact with a spring with force constant k. How far will the spring compress in
bringing the mass to rest?A spring exerts F proportional to x in both compression and extension
(for reasonable x).
![Page 178: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/178.jpg)
Driver’s Training and braking
• Speed of a car increased by 50%. By what factor will minimum braking distance be increased (ignore reaction time)?
• Braking force same. Therefore: Distance = 2.25 times original
![Page 179: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/179.jpg)
Both cases body uses chemical energy for muscles to exert these forces (you get tired, need more
Twinkies to keep going)--in terms of mechanical work performed: ZIP!
Work done holding the box up
![Page 180: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/180.jpg)
Work, PE, KE
• In the diagram at left no work is done moving an object along a horizontal direction when there is no friction (recall Galileo's principle of inertia. No force is required to keep an object moving. A small amount of work is necessary to start it moving and an equal amount is "given back" when it is stopped.)
![Page 181: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/181.jpg)
Work, PE, KE
• Whether the motion is circular (as with the pendulum), up a series of steps, or in one horizontal movement followed by lifting the height h, the work done is the same to raise the object to a height h.
This is what we mean by "Path Independence".
![Page 182: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/182.jpg)
The spring has more mechanical (elastic) potential energy when
compressed.
![Page 183: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/183.jpg)
Pendulumgraph with low friction
• Energy slowly "leaks away" from mechanical system
![Page 184: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/184.jpg)
Pendulum --graph with high friction
![Page 185: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/185.jpg)
KE -- PE
• Assume the track is frictionless and the car starts from rest.
• 1. At what position is kinetic energy the greatest?
• 2. When placed in order of least amount of kinetic energy to greatest, positions of the roller coaster are; 3. At what position does ET = EP only?
![Page 186: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/186.jpg)
Work, KE,PE
• 4. A 50.0 kg crate is pushed 4.00 m across a level frictionless surface with a force of 58.0 N. The kinetic energy of the moving crate is?
• 5. An object is dropped from rest a certain height above the floor. Its speed at the moment before it hits the floor is independent of:
•6. When work done on a frictionless horizontal surface, all the work is transformed into:
![Page 187: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/187.jpg)
Work, KE,PE
• 7. A sled slides down a snowy hill. As the sled descends the hill the total mechanical energy;
• 8. A boy rides up a hill on his bike. As he ascends the hill his kinetic energy;
• 9.Friction makes molecules vibrate with; • 10. As potential energy of a closed or isolated
system increases, __________ decreases
![Page 188: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/188.jpg)
Work, KE,PE
• 11. This type of energy is called "energy of position"? 12. This type of energy is called the energy of motion?
• 13. Which of the following is a unit for work? • 14. A figure skater exerts an upward force of
25.0 N on his skating partner while he glides 35.0 m on the ice. How much work is done on the lifted skater?
![Page 189: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/189.jpg)
Work, KE,PE
• 15. Work is done when a rubber band is stretched. Energy is then stored in the band until it snaps back. The stored energy is best known as ___________ energy
• 16. A crane raises a 20.0 N object above the ground in 2.50 seconds. The work done by the crane is 500 N. What is the power output of the crane?
![Page 190: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/190.jpg)
Work, KE,PE
• 17. For a free falling object, the ratio of the force of gravity to the acceleration is:
• 18. Which two quantities are measured in the same units? 19. A moving body must undergo a change of: 20. Two objects of equal mass are a fixed distance apart. If the mass of each object would be tripled, the gravitational force between the objects would?
•
![Page 191: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/191.jpg)
Gravitational Potential Energy
![Page 192: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/192.jpg)
Elastic Potential Energy The Potential Energy in figures a, b,
and c are:
![Page 193: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/193.jpg)
The Kinetic Energy is the energy an object has by virtue of its motion. The kinetic energy of an object of mass m
moving at a velocity v is , for pure transitional motion.
![Page 194: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/194.jpg)
![Page 195: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/195.jpg)
II. Total Mechanical Energy
The Total Mechanical Energy of an object is the sum of its kinetic and potential energies, .
![Page 196: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/196.jpg)
total mechanical energy of the system is conserved
• Law of Conservation of Energy: When the work done on a system by non-conservative forces is zero, then the total mechanical energy of the system is conserved (i.e., constant).
![Page 197: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/197.jpg)
Energy Transformation for a Pendulum
KE PE No friction!!
• The conservation of mechanical energy is demonstrated in the animation below. Observe the KE and PE bars of the bar chart; their sum is a constant value.
•
![Page 198: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/198.jpg)
Read each description and indicate whether energy is transformed
from KE PE or from PE KE
• A ball falls from a height of 2 meters in the absence of air resistance.
![Page 199: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/199.jpg)
Read each description and indicate whether energy is transformed from
KE PE or from PE KE• A skier glides from location A to location B
across the friction free ice.
![Page 200: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/200.jpg)
Read each description and indicate whether energy is transformed from
KE PE or from PE KE• A baseball is traveling upward
towards a man in the bleachers.
![Page 201: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/201.jpg)
Read each description and indicate whether energy is transformed from
KE PE or from PE KE• A bungee chord begins to exert an upward
force upon a falling bungee jumper.
![Page 202: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/202.jpg)
Read each description and indicate whether energy is transformed from
KE PE or from PE KE• The spring of a dart gun exerts a force on
a dart as it is launched from an initial rest position.
![Page 203: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/203.jpg)
The following descriptions involve external forces indicate whether the gain or loss of energy resulted in a change in the object's
kinetic energy, potential energy, or both
• Megan drops the ball and hits an awesome forehand. The racket is moving horizontally as the strings apply a horizontal force while in contact with the ball.
![Page 204: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/204.jpg)
Read each description and indicate whether energy is transformed from
KE to PE or from PE to KE• A baseball player hits the ball into the
outfield bleachers. During the contact time between ball and bat, the bat is moving at a 10 degree angle to the horizontal.
![Page 205: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/205.jpg)
Read each description and indicate whether energy is transformed from
KE to PE or from PE to KE• Rusty Nales pounds a nail into a block of
wood. The hammer head is moving horizontally when it applies force to the nail.
![Page 206: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/206.jpg)
Read each description and indicate whether energy is transformed from KE
to PE or from PE to KE• The frictional force between highway and
tires pushes backwards on the tires of a skidding car.
![Page 207: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/207.jpg)
Read each description and indicate whether energy is transformed from
KE to PE or from PE to KE• A diver experiences a horizontal reaction
force exerted by the blocks upon her feet at start of the race.
![Page 208: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/208.jpg)
Read each description and indicate whether energy is transformed from
KE to PE or from PE to KE• A weightlifter applies a force to lift a
barbell above his head at constant speed.
![Page 209: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/209.jpg)
law of conservation of the total mechanical energy
• (i.e. if Wnc=0 then ET= constant).
• And then,
![Page 210: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/210.jpg)
Work - Energy Theorem
• Let be the total mechanical energy of an object at position one (1).
• Let be its total mechanical energy at position two (2). The change in the total mechanical energy, from position one to position two, is .
![Page 211: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/211.jpg)
non-conservative forces.
• Work - Energy Theorem: The change in the total mechanical energy of a system (or object), from position one to position two, is equal to the work done on the system (or object) by the non-conservative forces.
![Page 212: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/212.jpg)
How Far Will It Skid?
• This mathematical relationship between initial speed and stopping distance is depicted in the animation
![Page 213: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/213.jpg)
Work and Energy--Energy Transformation for a Dart
• The animation shows that the energy of the dart/gun system is initially present in the form of the elastic potential energy (PEs) and gravitational potential energy (PEg). The springs of the dart gun are compressed which accounts for the elastic potential energy. Furthermore, the dart is initially elevated at a height of 1-meter above the ground which accounts for the gravitational potential energy. The presence of these two initial forms of energy are shown by the PEg and PEs bars of the bar chart.
![Page 214: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/214.jpg)
External-internal forcesWe categorize a force as internal or external because:• internal forces conserve mechanical energy (keep same)• external forces either add or remove mechanical energy
Internal Forces External Forces
Fg
Fsp FA
Ffr
Fair
FT
F┴
![Page 215: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/215.jpg)
The Work-Energy Theorem Internal vs. External Forces
Forces can be categorized as internal forces or external forces.
![Page 216: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/216.jpg)
External-internal forces• The significance of categorizing
a force as internal or external is related to the ability of that type of force to change an object's total mechanical energy when it does work upon an object.
• When work is done upon an object by an external force, the total mechanical energy changes of that object is changed
![Page 217: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/217.jpg)
conservation of mechanical energy-practice
• Example 1• You are standing on the edge of a cliff and
decide to push a rock that has a mass of 2kg off the edge with your foot. Using conservation of mechanical energy, determine how fast the rock is going just before it impacts the ground 75m below. Assume that there is no air resistance. If you dropped a 20kg rock from the same spot would the velocity be the same?
![Page 218: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/218.jpg)
conservation of mechanical energy-practice
• Example 2
• A 4kg block slides across a frictionless table with a velocity of 5m/s into a spring with a stiffness of 2500N/m. How far does the spring compress?
![Page 219: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/219.jpg)
Net force—net work
• In the picture above, answer the following: The picture represents a 2 kg object which starts from rest. The force represents the net force. – Describe the motion of the object for its first 10 m. – Describe the motion of the object for the distance interval of 10 m to 15 m. – Determine the acceleration of the object for the first 10 m. – How long will it take the object to go the 10 m? – What is the net work done over the 10 m interval? – What is the object's speed at the end of the 10 m interval? – What is the net work done from 10 m to 15 m? – What is the object's speed at the end of the 15 m?
![Page 220: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/220.jpg)
PE and KE and work
• In the picture above, the object is rolling along the horizontal surface. Answer the following:
• Describe the motion of the object when it leaves the edge of the surface. • How long does it take the object to reach the ground? • What is the speed of the object the instant before it hits? • What is the initial gravitational U of the object? • What is the initial EK of the object? • What is the initial mechanical energy of the object? • Draw a graph representing the change in EK of the object. • On your graph, when will gravitational U equal EK. • Draw a graph representing the mechanical energy of the object.
![Page 221: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/221.jpg)
Elastic PE and KE
• Two blocks, one with mass M and the other with mass m, are connected by a light frictionless spring. You hold mass m and compress mass M. When mass M is released, it rebounds with speed v. Mass M is compressed a distance d. Using only the given variables and constants, answer the following:
• What is the spring constant? • What work is done to compress mass M? • Draw a graph of the change in elastic U as the spring is compressed and
then released. • What is the maximum speed of the object? • What is its speed when it is compressed 1/3 d?
![Page 222: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/222.jpg)
Work on incline
• Answer the following about the above picture: • Draw the three forces acting on the object. • If the object slides down the incline, what work
was done with gravity? • What work is done against the motion? • What is the net work done? • Predict the final velocity of the object.
![Page 223: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/223.jpg)
Variables for power
![Page 224: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/224.jpg)
The standard metric unit of power is the Watt.
• Power is the rate at which work is done. It is the work/time ratio. Mathematically, it is computed using the following equation.
![Page 225: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/225.jpg)
Variables for power
![Page 226: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/226.jpg)
Energy Transformation for Downhill Skiing • Along the inclined section of the run, the total
mechanical energy of the skier is conserved provided that:
• there is a negligible amount of dissipative forces (such as air resistance and surface friction), and
• the skier does not utilize her poles to do work and thus contribute to her total amount of mechanical energy
![Page 227: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/227.jpg)
Stopping Distance of a Hot Wheels Car When the Hot Wheels car collides with the box and skids to a stop,
external forces do a significant amount of work upon the car. The force of friction acts in the direction opposite the car's motion and thus does negative work upon the car. This negative works contributes to a loss in mechanical
energy of the car.
![Page 228: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/228.jpg)
Summary of Energy Forms
Mechanical Energy Type
Formula
Kinetic
Gravitational PEg = mgh
Elastic
![Page 229: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/229.jpg)
KE.PE and pendulumhttp://www.hcc.hawaii.edu/distance/sci122/Programs/p19/p19.html
more there
![Page 230: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/230.jpg)
Energy Tranformation
E = mgh3 E = mgh2 + 1/2 mv22
E=1/2mv12 E = mgh3
![Page 231: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/231.jpg)
Energy Conservation
• TME is the sum of both types of energy.
• TME is the same at all points if there is NO friction.
![Page 232: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/232.jpg)
Elastic force
• the amount of force is directly proportional to the amount of stretch or compression (x); the constant of proportionality is known as the spring constant (k).
![Page 233: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/233.jpg)
Elastic potential energy
• There is a special equation for springs which relates the amount of elastic potential energy to the amount of stretch (or compression) and the spring constant. The equation is
![Page 234: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/234.jpg)
Use 9.8 m/s/s to determine the gravitational PE.
![Page 235: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/235.jpg)
gravitational potential energy • These relationships are expressed by the
following equation:
• PEgrav = mass * g * heightPEgrav = m * g * h
• In the above equation, m represents the mass of the object, h represents the height of the object and g represents the acceleration of gravity (approximately 10 m/s/s on Earth).
![Page 236: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/236.jpg)
PE to KE in freefall
![Page 237: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/237.jpg)
Forces on a spring
![Page 238: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/238.jpg)
PE- gravitational and elastic
![Page 239: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/239.jpg)
Kinetic energy• The amount of kinetic energy which an object has• depends upon two variables: • the mass (m) of the object • and the speed (v) of the object. • The following equation is used to represent the
kinetic energy (KE) of an object.•
• where m = mass of object• v = speed of object
![Page 240: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/240.jpg)
Units of work and energy
• Like work and potential energy, the standard metric units of measurement for kinetic energy is the Joule. As might be implied by the above equation, 1 Joule is equivalent to N-m
N = kg m/s/s
![Page 241: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/241.jpg)
For elastic force, F= kx, Area under curve from 0 to xf =
![Page 242: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/242.jpg)
PE and KE for
pendulum
![Page 243: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/243.jpg)
PE and KE for
horizontal spring
![Page 244: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/244.jpg)
Elastic potential energy
The second form of potential energy which we will discuss in this course is elastic potential energy.
Elastic potential energy is the energy stored in elastic materials as the result of their stretching or compressing. Elastic potential energy can be stored in rubber bands, bungee chords, trampolines, springs, an arrow drawn into a bow, etc.
The amount of elastic potential energy stored in such a device is related to the amount of stretch of the device - the more stretch, the more stored energy.
![Page 245: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/245.jpg)
(a) Show that the system is non-conservative
(b) How much work is done by the non-conservative force?
• Skier with Friction
• A skier of mass 80 kg starts from rest down a slope where h = 110 m. The speed of the skier at the bottom of the slope is 20 m/s.
![Page 246: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/246.jpg)
Potential energy
problem
• 1. A cart is loaded with a brick and pulled at constant speed along an inclined plane to the height of a seat-top. If the mass of the loaded cart is 3.0 kg and the height of the seat top is 0.45 meters, then what is the potential energy of the loaded cart at the height of the seat-top?
![Page 247: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/247.jpg)
Work problem
• . If a force of 15.0 N is used to drag the loaded cart (from previous question) along the incline for a distance of 0.90 meters, then how much work is done on the loaded cart?
![Page 248: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/248.jpg)
Kinetic energy problem
• 1. Determine the kinetic energy of a 1000-kg roller coaster car that is moving with a speed of 20.0 m/s
• If the roller coaster car in the above problem were moving with twice the speed, then what would be its new kinetic energy?
![Page 249: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/249.jpg)
Kinetic energy problem
• Missy Diwater, the former platform diver for the Ringling Brother's Circus had a kinetic energy of 15 000 J just prior to hitting the bucket of water. If Missy's mass is 50 kg, then what is her speed?
![Page 250: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/250.jpg)
Kinetic energy problem
• 4. A 750-kg compact car moving at 100 km/hr has approximately 290 000 Joules of kinetic energy. What is the kinetic energy of the same car if it is moving at 50 km/hr?
![Page 251: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/251.jpg)
Ben's power rating.• Suppose that Ben Pumpiniron elevates his 80-kg body up the
2.0 meter stairwell in 1.8 seconds. If this were the case, then we could calculate Ben's power rating. It can be assumed that Ben must apply a 800-Newton downward force upon the stairs to elevate his body. By so doing, the stairs would push upward on Ben's body with just enough force to lift his body up the stairs. It can also be assumed that the angle between the force of the stairs on Ben and Ben's displacement is 0 degrees. With these two approximations, Ben's power rating could be determined as shown below.
•
![Page 252: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/252.jpg)
the expression for power can be rewritten once more as
force*velocity. This is shown below.
• This new expression for power reveals that a powerful machine is both strong (big force) and fast (big velocity).
![Page 253: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/253.jpg)
Work and power practice
• 1. Two physics students, Will N. Andable and Ben Pumpiniron, are in the weightlifting room. Will lifts the 100-pound barbell over his head 10 times in one minute; Ben lifts the 100-pound barbell over his head 10 times in 10 seconds. Which student does the most work? Which student delivers the most power? Explain your answers.
![Page 254: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/254.jpg)
Work and power practice
• During the Personal Power lab, Jack and Jill ran up the hill. Jack is twice as massive as Jill; yet Jill ascended the same distance in half the time. Who did the most work? Who delivered the most power? Explain your answers.
![Page 255: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/255.jpg)
Work and
power practice
• 3. A tired squirrel (mass of 1 kg) does push-ups by applying a force to elevate its center-of-mass by 5 cm. Determine the number of push-ups which a tired squirrel must do in order to do a mere 1.0 Joule of work. If the tired squirrel does all this work in 4 seconds, then determine its power.
![Page 256: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/256.jpg)
Work and power
practice
• 3. A tired squirrel (mass of 1 kg) does push-ups by applying a force to elevate its center-of-mass by 5 cm. Determine the number of push-ups which a tired squirrel must do in order to do a mere 1.0 Joule of work. If the tired squirrel does all this work in 4 seconds, then determine its power.
![Page 257: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/257.jpg)
Work and power practice
• 4. If little Nellie Newton lifts her 40-kg body a distance of 0.25 meters in 2 seconds, then what is the power delivered by little Nellie's biceps?
![Page 258: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/258.jpg)
Work and power practice
• Your monthly electric bill is expressed in kilowatt-hours, a unit of energy delivered by the flow of l kilowatt of electricity for one hour. Use conversion factors to show how many joules of energy you get when you buy 1 kilowatt-hour of electricity.
![Page 259: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/259.jpg)
Work and power practice
• An escalator is used to move 20 passengers every minute from the first floor of a department store to the second. The second floor is located 5-meters above the first floor. The average passenger's mass is 60 kg. Determine the power requirement of the escalator in order to move this number of passengers in this amount of time.
![Page 260: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/260.jpg)
• 9. Calculate the potential, kinetic, and mechanical energies, velocity, work, and power of the ball at the various locations.
![Page 261: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/261.jpg)
• Important equations used throughout this lab packet are listed below for reference.
• % KELOST = 100g = -9.8 m/s2
mghPE
2
2
1mvKE
fo EE KEW
of KEKEKE
oKE
KE
2
2
1gttvy o
2
2
1attvx o
Important equations used throughout this lab packet are listed below for reference.
% KELOST =
![Page 262: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/262.jpg)
Key Terms• energy• chemical energy• sound energy• light energy• nuclear energy• potential energy• heat energy• mechanical energy• gravitational potential energy• point of reference• kinetic energy• Work-Energy Theorem• Law of Conservation of Energy
![Page 263: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/263.jpg)
![Page 264: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/264.jpg)
![Page 265: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/265.jpg)
An Eskimo pulling a sled with a rope at
an angle θ to the horizontal. •
Problem An Eskimo returning from a successful fishing trip pulls a sled loaded with salmon. The total mass of the sled and salmon is 50.0 kg, and the Eskimo exerts a force on the sled by pulling on the rope. The coefficient of kinetic friction between the sled and the ground is 0.200.
(a) The Eskimo pulls the sled 5.40 m, exerting a force of 1.10 102 N at an angle of θ = 0°. Find the work done on the sled by friction, and the net work.
(b) Repeat the calculation if the applied force is exerted at an angle of θ = 30.0° with the horizontal. Figure 5.6 An Eskimo pulling a sled with a rope at an angle θ to the horizontal. Strategy See Figure 5.6. The frictional work depends on the magnitude of the kinetic friction coefficient, the normal force, and the displacement. Use the y-component of Newton's second law to find the normal force , calculate the work done by friction using the definitions, and sum with the work done by the applied force without friction to obtain the net work on the sled. Part (b) is solved similarly, but the normal force is smaller because it has the help of the applied force app in supporting the load.
![Page 266: class notes; 4.26.11. Work and Horsepower NO Quiz TODAY](https://reader035.vdocuments.mx/reader035/viewer/2022062517/56813ca6550346895da6569f/html5/thumbnails/266.jpg)