Claro IP20 12VAC Spotlight - LED MR-16

Category: The Claro MR-16 micro Spotlight combines design excellence with precision engineering. Claro features excellent beam control with the use of a standard integral lens or louver.

Spotlight: Claro (Claro). Accomodates one media.

Material: Machined aluminum.

Finish: Brushed Aluminum (AL), Black (BK), White (WH), Oil-Rubbed Bronze (BRZ), Brushed Brass (BBR). Contact factory for Polished Brass (PBR) finish and information.

Systems: Claro is used with one of Tegan’s versatile connectors that will enable easy connection to the full range of Systems and Monopoints. Refer to System Spec Sheets and Installation Sheets for more detail: Centro Trac Systems, Retrac System (RTS), Duplex Cable System (DCS), Monopoint Recessed Flat Plate - Remote Power Supply (MPRFP-RP), Monopoint Recessed Trimless - Remote Power Supply (MRTL-RP), Monopoint, Panel Mount - Remote Power Supply (MPPM-RP), Single Recessed Enclosure Monopoint (MP-1-RE), Double Recessed Enclosure Monopoint (MP-2-RE), Round J-Box Mount Monopoint - Integral Transformer 120V/277V (MPJ-IT80-120/277), Round J-Box Monopoint - Remote Power Supply (MPJ-RPS), Square J-Box Mount Monopoint - Integral Transformer (MPSQ-IT).

Connectors: Connectors ship with the Spot as specified. Refer to page 2.

Adjustment: Smooth, 360° bearing rotation with 90° vertical adjustment.

Source: One 50W MR-16,12VAC (GU5.3 Bi-Pin) or LED 12VAC MR-16 lamp. Lamps supplied by others. Note that all LED MR16 lamps (Cree, Soraa, etc.) are rated for different operating conditions as per the lamp manufacturer. In addition, since these lamps are new technology; they are subject to frequent changes in recommended operating conditions and/or Spot compatibility. Please carefully check to ensure the lamp specified is rated to be compatible with the selected Tegan Spot. Contact factory to order LED lamps. For dimming LED MR-16 lamps (Soraa) with 12VAC transformers, please refer to page 3 of our MR-16 LED Specsheet.

Power Supply: Refer to 12VAC Electronic Transformer Specsheet or 12VAC Magnetic Transformer Specsheet for Power Supply options.

Installation: Refer to Claro Installation Instructions for details. For system layout, and specification assistance, refer to the Trac Design Guide under the Gallery link.

Accessories: Claro Media Holder 2-16 - can accommodate up to two Media (CMH2-16), Claro Honeycomb Louver 16 - Black (CHCLB-16), Claro Prismatic Lens 16 (CPL-16), Claro Sandblasted Lens 16 (CSBL-16), Claro Linear Spread Lens 16 (CLSL-16), Claro Softening Lens 16 (CSFL-16), Claro Solite Lens 16 (SOL50-16). UV lenses - Contact factory. 72” Spot Extension (SpotExt72), 72” Double Spot Extension (DSpotExt72).

Labels: ETL & CE Listed; Tested to UL 1574 - Issue: 2004/09/07 Ed: 3 Rev:2012/01/25 UL Standard for Safety Track Lighting Systems. IP20. Interior use only. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form. 3 Year Warranty.

teganlighting.com • info@teganlighting.com • (415) 504-3565 • TG06 8/17/18 1

90˚ 360˚Available

AccessoriesIP

HALOGEN

MR-16 LED

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG06 8/17/18 2

ClaroClaro - Mounting System Order Guide - Mounting Options shown separately

Claro Spot - No Connector for Monopoint Mounting Claro, Brushed Aluminum, Oil-Rubbed Bronze, Black, White or Brushed Brass Finish (Claro-AL/BRZ/BLK/WH/BBR).Accommodates 1 or 2 Media (with Claro Media Holder 2-16). Add Desired Media to end of catalog # above.

Claro Spot - with Straight Connector Centro Trac Mounting Claro, Centro Trac Connector, Brushed Aluminum, Oil-Rubbed Bronze Finish, (Claro-CTC-AL/BRZ).Accommodates 1 or 2 Media (with Claro Media Holder 2-16). Add Desired Media to end of catalog # above.

Claro Spot - with 90° Connector* Centro Trac Mounting Claro, Centro 90° Connector, Brushed Aluminum, Oil-Rubbed Bronze Finish (Claro-C90C-AL/BRZ).Accommodates 1 or 2 Media (with Claro Media Holder 2-16). Add Desired Media to end of catalog # above. * C90C is for Direct Wall Mount System

Claro Spot - with Retrac Connector for Retrac System Claro, Retrac Connector, Brushed Aluminum, Black or White Finish (Claro-RTCN-AL/BLK/WH).Accommodates 1 or 2 Media (with Claro Media Holder 2-16). Add Desired Media to end of catalog # above.

Claro Spot - with Duplex Connector for Duplex Cable System Claro, Duplex Cable Connector, Brushed Aluminum Finish (Claro-DCC-AL). Accommodates 1 or 2 Media (with Claro Media Holder 2-16). Add Desired Media to end of catalog # above.

Accessories for Claro Spot - Add to the end of the Catalog #’s above as detailed below. Claro Media Holder 2-16, Brushed Aluminum, Oil-Rubbbed Bronze, Black, White or Brushed Brass Finish (CMH2-16-AL/BRZ/BLK/WH/BBR)Honeycomb Louver (CHCLB-16) Prismatic Lens 16 (CPL-16) Sandblasted Lens (CSBL-16)Linear Spread Lens 16 (CLSL-16)Softening Lens 16 (CSFL-16)Solite Lens ((SOL50-16) 72” Spot Extension (SpotExt72) 72” Double Spot Extension (DSpotExt72)

ø57mm(2.25”)

114mm(4.5”)114mm(4 -1/2”)

ø57mm(2 -1/4”)

Claro - Spotlight

CLICK

TWIST

The Twist & Click system allows the Spotlights to be easily removed. The Spotlights click into the jack plug socket, the threaded jacket then screws into position to lock the connection in place. Once fixed, the luminaires are free to rotate or can be secured using two locking pins. Supplied separately.

Twist & Click System

The Claro MR-16 Spotlight combines design excellence with precision engineering. Claro features excellent beam control with the use of Media. Brushed Aluminum (AL), Black (BLK), White (WH), Oil-Rubbed Bronze (BRZ) or Brushed Brass (BBR) finish. Contact factory for Polished Brass (PBR), minimum order of 25.

Claro (Claro)

IP20 12VAC Spotlight - LED MR-16

Claro

Connector for Duplex Cable System. Brushed Aluminum (AL) finish. Sup-plied with Spotlight as specified.

Connector for Retrac System. Brushed Aluminum (AL), Black (BLK) or White (WH) finish. Supplied with Spotlight as specified.

Retrac Connector (RTCN-AL) Duplex Cable Connector (DCC-AL)

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG06 8/17/18 3

22

102

22mm(7/8”)

102mm(4”)

ø28mm(1 1/8”)

17mm(11/16”)

13mm(1/2”)bottom of

Retrac

Claro - System Connectors

ø19mm(3/4”)

25mm(1”)

ø19mm(3/4”)

25mm(1”)

Straight Connector for Centro Trac system. Brushed Aluminum (AL) finish. Supplied with Spotlight as specified.

25mm (1”)

ø19mm (3/4”)

ø19mm(3/4”)

25mm(1”)

90° Connector for Centro Trac System. Brushed Aluminum (AL) or Bronze (BRZ) finish. 90° off of ceiling mount Trac or wall mount application. Sup-plied with Spotlight as specified.

Centro Trac Connector (CTC) Centro 90° Connector (C90C)

IP20 12VAC Spotlight - LED MR-16

Claro

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG06 8/17/18 4

72” Spot Extension (SpotExt72)

81mm(3 3/16’)

ø24mm(15/16”)

1.8m(72”)1.8m

(72”)

72” Double Spot Extension (DSpotExt72)

Can accommodate up to two Media. Brushed Alu-minum (AL), Black (BLK), White (WH), Oil-Rubbed Bronze (BRZ) or Brushed Brass (BBR) finish.

1/8” Hexcell black metal. Controls spill illumination and glare.

Creates a symmetrical broadening of the lamp beam.

Claro - Accessories

ø50mm(2 -1/8”)

ø50mm(2 -1/8”)

Claro Media Holder 2-16(CMH2-16-AL)

Claro Honeycomb Louver 16 (CHCLB-16)

Claro Prismatic Lens 16 (CPL-16)

Creates an uniform beam pattern that is useful for wall washing.

Will extend the lamp’s beam along one axis, allowing hightlighting of wider areas from a single fixture.

Smooths and widens irregular beam pattern.

ø50mm(2 -1/8”)

ø50mm(2 -1/8”)

ø50mm(2 -1/8”)

Claro Sandblasted Lens 16 (CSBL-16)

Claro Linear Spread Lens 16 (CLSL-16)

Claro Softening Lens 16(CSFL-16)

ø57

11

ø57mm(2 1/4”)

11mm(7/16”)

Tempered glass with a stipple effect that that pro-vides obscurity while retaining high transmission values. This low-iron optically clear glass offers maximum transmission and minimal absorption.

ø50mm(2 -1/8”)

Claro Solite Lens 16 (SOL50-16)

Connector Spot Extension that attaches to any system to extend the Spot 72” from the System Connector. Specify with the appropriate system con-nector (not required with Monopoints). Brushed Aluminum (AL), Black (BLK) or White (WH) finish. Field-cuttable or can be cut to shorter lengths at the factory.

Connector for mounting two spotlights. Specify with the appropriate system connector (not required with Monopoints). Available in Brushed Aluminum (AL) finish. Contact factory for Black (BLK) or White (WH) Finish. Field-cuttable or can be cut to shorter lengths at the factory. Refer to Tiro Installation Instruc-tions for details.

IP20 12VAC Spotlight - LED MR-16