clamshell buckets with vertical hydraulic · pdf fileclamshell buckets with vertical hydraulic...
TRANSCRIPT
54
CLAMSHELL BUCKETS WITH VERTICAL HYDRAULIC CYLINDER FOR DAILY USE
≥ The clamshell bucket for daily routine work is ideal for excavating foundations, trenches and other similar applications in civil engineering
≥ Good digging performance due to its plunging behaviour and the approved shell geometry
≥ Long service life is ensured through the use of 500 HB steel in the manufacture of cutting edges and the generously dimensioned bearing system
≥ The hydraulic cylinder is enclosed in a carrier box, lowering the risk of damage and down-time
≥ Synchronised shell operation thanks to the generously dimensioned push rods between the carrier box and the shells
≥ All bearing bushes are made of a high-strength bronze alloy to secure the emergency running properties
≥ The clamshell bucket with scraper is designed specially for excavating foundations and graves
≥ Bolt-on digging teeth are delivered with each clamshell bucket
≥ Excellent digging characteristics are the result of the high closing force of 20 kN at 260 bar operating pressure
55
ACCESSORIES TECHNICAL DRAWING
Type DescriptionPZR450GF Recommended flange rotator – load capacity 4500 kg
PZR450G-XX* Shaft rotator – load capacity 4500 kg
PZZR450SV-PK Quick change system for shaft rotators
PZZR450R-XX* Reduction link between rotator and grapple
PZZG-SC** Scraper
PZZG002-AH Welded hooks (2 pcs.)
PZZG-VK Wear plates to protect the horizontal cuttingedges (2 pcs.)
PZZG-AV/AS Adapters for mounting compression rails (non-return valve necessary)
PZZS072A-09 Compression rails – length 720 mm (2 pcs.)
PZZS100A-09 Compression rails – length 1000 mm (2 pcs.)
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS: WITH SCRAPER
SCOPE OF DELIVERY: Clamshell bucket with bolt-on teeth and non-return valve
SCOPE OF DELIVERY: Clamshell bucket with bolt-on teeth, scraper and non-return valve
CLAMSHELL BUCKET
Type Volume Width B Opening max. Number of Closing force Load capacity Self weight
(litre) (mm) (mm) teeth (kN) (kg) (kg)
PZG150GV 150 325 1390 3 20 3000 260
PZG200GV 200 400 1390 3 20 3000 275
PZG250GV 250 500 1390 5 20 3000 295
PZG325GV 325 600 1390 5 20 3000 315
PZG350GV 350 650 1390 5 20 3000 320
PZG450GV 450 800 1390 9 20 3000 355
PZG100GVF 100 600 800 5 30 3000 280
PZG125GVF 125 760 800 7 30 3000 315
PZG150GVF 150 600 1000 5 30 3000 275
PZG190GVF 190 760 1000 7 30 3000 305
PZG200GVF 200 600 1000 5 30 3000 295
* please specify Ø shaft when ordering ** please specify type of grapple
TRUCK CRANE REQUIREMENTS
Operating pressure: max. 260 barPressure limitation: 260 barPump capacity: 25 – 75 l/minTwo hydraulic functions on the crane
220
35
Ø40
1392B
84
1316
66
ACCESSORIESFOR CLAMSHELL BUCKETS
≥ The scraper is for clamshell buckets with narrow widths
≥ During opening the scraper clears the inside of the shells of sticky materials such as clay
≥ The design varies depending on the shape of the grapple
≥ The adapter enables the mounting of compression rails or the support for concrete rings for handling paving slabs, curbstones, concrete rings, etc.
≥ The adapter can only be used with a non-return valve, simultaneous usage with a scraper is not possible
≥ The central lifting device for the HPXdrive, welded eyes or welded hooks serve for lifting chains or slings
≥ The maximum capacity per eye or hook is 1000 kg
≥ The wear plates serve to protect the horizontal cutting edges
67
WEAR PLATES
ADAPTER FOR COMPRESSION RAILS
SCRAPER
CENTRAL LIFTING DEVICE, WELDED HOOKS
Type Description
PZZG-SC For HPXdrive- and clamshell buckets (please indicate the type of bucket when ordering)
PZZG-AV/AS Adapter for compression rails
PZZS072A-09 Compression rails – length 720 mm (2 pcs.)
PZZS100A-09 Compression rails – length 1000 mm (2 pcs.)
PZHP04ZA Central lifting device for HPXdrive standard
PZHP05ZA Central lifting device for HPXdrive heavy duty
PZZG002-AH Welded hooks, 2 pcs.
PZZG-VK
PZZG-AV/AS
PZZG002-AH
PZHP04ZA; PZHP05ZA
PZZG-VK 650 mm, 2 pcs. (please indicate the type of bucket when ordering)
EXTENSION FOR EXCAVATING WITH THE HPX DRIVE
PZHP450V Extension for excavating – for canal construction and civil engineering – 450 mm, 30 kg
PZHP2000V Extension for excavating – for canal construction and civil engineering – 2000 mm, 97 kg
PZHP450V
NOTE: Other lengths are available on request.
NOTE: Other widths are available on request.
PZZG-SC