ci/sfb thermomass
TRANSCRIPT
The
THERMOMASS®
System
Build faster. Save longer.
Unterweg 22 D-64625 Bensheim-Auerbach, Germany
Phone: +49-6251-790890Fax: +49-6251-790806
E-mail: [email protected]
Artha BVT s.r.l.Via Provinciale Mercatale, 114/c50059 Vinci (Fl), ItalyPhone: +39-0571-90321Fax: +39-0571-902280E-mail: [email protected]
Composite Distributors Limited29 Leslie Hills Drive, PO Box 8480Christchurch, New ZealandPhone: +64-3-348-8015Fax: +64-3-348-2409E-mail: [email protected]
Composite Systems (AUST) PTY LTDPO Box 2465Fitzroy MDC, Victoria 3065, AustraliaPhone: +61-3-982-48211Fax: +61-3-982-48611E-mail: [email protected]
Composite Technologies Corporation1000 Technology Drive, PO Box 950,Boone, Iowa, 50036, USAPhone: +1-515-433-6075Fax: +1-515-433-6088E-mail: [email protected]
Construction Systems Marketing GmbHUnterweg 22 64625 Bensheim-Auerbach, GermanyPhone: +49-6251-790890Fax: +49-6251-790806E-mail: [email protected]
Construction Systems Marketing (U.K.) Ltd.Astwith House, AstwithChesterfield, Derbyshire S45 8AN,United KingdomPhone: +44-1246-853528Fax: +44-1246-857363E-mail: [email protected]
R.W. Bautech Hungary Kft.Ramocsa utca 13.1118 Budapest, HungaryPhone: +36-1-246-2025Fax: +36-1-246-2029E-mail: [email protected]
Ravago Austria Handelsgesellschaft mbHHumelfeldstrasse 134300 St. Valentin, AustriaPhone: +43-7435-52745Fax: +43-7435-52745-25E-mail: [email protected]
Ravago Yapı Endrüstrisi veTicaret Anonim ŞırketiBağdat Cad. No. 383/8Hacı Mavuk İş MerkeziŞaşkınbakkal, 81070, Kadıköy, İstanbul, TurkeyPhone: +90-216-467-0306Fax: +90-216-467-0374E-mail: [email protected]
THERMOBATI Europe (Sarl)16, Rue Jacques Dulud92200 Neuilly-Sur-Seine, FrancePhone: +33-1-46373232Fax: +33-1-46375339E-mail: [email protected]
UNITREND Sp. Zo.o.Ul. Sienna 7/231-041 Karków, PolandPhone: +48-12-4232393Fax: +48-12-4232199 / 4214022E-mail: [email protected]
Uniclass
CI/SfB
L344:N352
(21) Xf2 (M2)
C241:Y46
EPIC
I CH
NZ
AUS
USA CDN
D NL B L S
H
A
TR
F
PL
GB IRL ZA
The THERMOMASS® Building System is an
insulated concrete sandwich wall system
featuring a fully tested, pre-engineered design.
The two component system consists of fiber
composite connectors and pre-formed
STYROFOAM* brand insulation allowing for a
fast, error-free installation.
A THERMOMASS® structure is quiet, safe and
maintenance free. It is also earthquake,
hurricane, tornado and fire resistant. Heating
and cooling costs are greatly reduced since over
99 % of the insulation value is maintained.
A THERMOMASS® building can be erected in
days instead of weeks and it allows for easy
integration of complex designs and unique
aesthetics. THERMOMASS® insulated concrete
panels are the proven solution to long-lasting,
energy-efficient and appealing concrete
construction. It may be used in tilt-up, precast,
prestressed, modular precast and vertical pour
concrete applications.
What is Thermomass®?
BENEFITS
FIREPROOF
✔ THERMOMASS® panel has been tested to
4 hours by Underwriters Laboratory
✔ Lower insurance premiums
ENERGY EFFICIENT
✔ Non-conductive connectors
✔ Edge to edge insulation
✔ No solid cast sections
DURABILITY / LOW MAINTENANCE
✔ Exterior wythe expands and contracts
✔ Eliminates bowing and cracking
✔ No condensation or “sweating”
COST & EASE OF CONSTRUCTION
✔ Requires no special tools
✔ Easy to install
✔ Has 2 year cost payback
UTILITY SAVINGS
✔ Higher R-value / Lower U-value
✔ Thermal Mass Effect
✔ Reduces HeatingVentilationAirConditioning
(HVAC) loads
Value Added ServicesExcluding our fabrication services, Construction
Systems Marketing is pleased to provide
the following services at NO COST:
✓ Building design and detailing assistance for
compliance with THERMOMASS® technology
✓ Isothermal, mass & dew-point analysis
✓ Cost-payback analysis
✓ Dynamic building performance analysis
✓ Field support is available to assure successful
application of the THERMOMASS® Building System
at the job site
✓ Fabrication services are available to custom cut
insulation per individual project requirements
call for quote!
The proprietary extrusion process and polystyrene
resin used to produce STYROFOAM* brand
insulation creates a closed cell structure. Since
there are no gaps or voids between the cells,
the rigid boards are highly resistant to moisture.
In addition to its high thermal resistance and
high compressive strength, STYROFOAM* brand
insulation meets environmental standards and is
recyclable where local programs and facilities exist.
E
System Components
Fiber Composite Connectors
F Made from a resilient composite matrix,
the THERMOMASS® fiber composite connector
possesses remarkable strength and durability.
These connectors are vastly superior to steel rods in
concrete sandwich panels. They are non-corrosive,
chemically resistant and possess low thermal
conductivity eliminating “thermal short circuits”.
Construction Systems Marketing will consistently provide outstanding customersatisfaction by conveniently delivering products and services that are valued for
features, quality and price. Our distributors and agents in the territory will listento our customers and use their insights to make continuous improvements.
Lee TzentisGeneral Manager / Construction Systems Marketing
NOTE: The data contained in this document are believed to be correct and given in good faith. However no liability, warranty or guarantee of final product or system performanceis created by this document. This document does not constitute a sales specification and the Construction Systems Marketing’s General Terms and Conditions continue to apply.
STYROFOAM brand insulation
® THERMOMASS is a registered trademark of Composite Technologies Corporation
* STYROFOAM is a trademark of The Dow Chemical Company
Tilt-Up
Many benefits are achieved withtilt-up construction. By using the
floor slab as the primary castingsurface, the panels are produced onsite eliminating transportation costs.Once cured, these panels are lifted intoplace forming the building envelope.The high strength THERMOMASS®
connectors hold the layers secureduring the entire process.
The exterior layer of concrete
is placed and leveled.
Insulation is placed over un-hardened
concrete. THERMOMASS® fiber composite
connectors are then inserted
through pre-formed holes.
After placing lifting devices, bracing
inserts and required reinforcement,
the structural wythe is placed.
The cured panels are lifted into position
and temporarily braced.
Precast /Prestressed
Precast THERMOMASS® concretesandwich wall panels are produced
to specification in a quality controlledfactory environment and are thenshipped to the construction location.Contractors can choose from a varietyof panel designs including:prestressed, hollow core, double-tee,inverted waffle and architecturalprecast.
After placing the first wythe of concrete,
STYROFOAM* brand insulation is placed
immediately after the concrete is leveled.
THERMOMASS® connectors are then
inserted through holes pre-formed in the
insulation.
Finished precast panel is then delivered to
the job site.
Sieger GmbH + Co - Lichtenau, GermanyYMCA/YWCA – Canada
Fa. Rudolf Nigrin – Mühldorf, GermanyPower station – Hungary
After the second layer of concrete is
placed and the panel has cured, it is
stacked for delivery to the job site.
Modular Precast
Modular precast constructionprovides the opportunity to
construct an entire facility, room byroom, in a quality-controlledenvironment. Rooms can then beerected at a given site. A continuous,fire-proof enclosure, free ofconstruction joints and extremelysecure, typifies the modular precastbuilding.
Poured-In-Place
Utilizing THERMOMASS® poured-in-place technology allows for the
rapid construction of highly energy-efficient, load bearing, insulatedconcrete walls. Fiber compositeconnectors and STYROFOAM*insulation eliminate thermal bridgestypically found in otherpoured-in-place insulated wallconstruction methods.
Vista Grande Community Church – Colorado, USA
Poured-in-place THERMOMASS® residence - USA
The reinforcing skeleton for the produc-
tion of a modular unit is assembled and
lowered into the mold by roof crane.
The exterior forms are hand-set. Any type of
forming system may be used.
After placing the THERMOMASS® Building
System between the form-ties, the interior
forms are set and braced.
Concrete is poured over the insulation
delivering equal amounts to both wythes.
THERMOMASS® is placed in the precast
mold with connectors spaced at 12”
on center.
The walls have been cast and the roof
of the module is being poured.
Finished modular units are then ready to
be shipped.
George R. Vierno Center – Rikers Island, USA
Hampden County Correctional Facility - USA
The THERMOMASS® Building System is
prepared by inserting fiber composite
connectors through pre-formed insulation
which is held in place with snaplocks.