cisco/linksys spa phone base setup for megapath duet ...€¦ · ip connectivity to the sip phone....
TRANSCRIPT
CCiissccoo//LLiinnkkssyyss SSPPAA PPhhoonnee
BBaassee SSeettuupp ffoorr MMeeggaaPPaatthh DDuueett HHoosstteedd VVooiiccee
SSeerrvviiccee
© 2010 MegaPath Inc. All rights reserved. Confidential and Proprietary 2
SSuummmmaarryy This document details the steps to obtain the basic phone setup necessary for
provisioning your Linksys or Cisco SPA phone to the MegaPath network. Once these
steps are completed, the phones will be ready to use with the Duet Hosted service.
MMiinniimmuumm RReeqquuiirreemmeennttss::
� The EdgeMarc router and Ethernet switch need to be installed and configured.
MegaPath will install and configure the EdgeMarc for all Duet Hosted customers.
MegaPath will also install and configure the Ethernet switch if MegaPath provided.
If the Ethernet switch is customer provided, the customer is be responsible for the
installation and configuration of the switch.
� The MAC Address (MAC ID) and phone number for each of the phones will need to
be provided to MegaPath. The MAC Address is located on a sticker on the bottom
of each phone. MegaPath will use the MAC Address and phone number for each
phone to provision it to the MegaPath server.
� IP address of the phone. DHCP is enabled on the EdgeMarc allowing the SIP Phones
and PCs to automatically have an IP address assigned to them. The phone IP address
can be manually looked up by depressing the "Menu" button on the phone, then
scrolling down to "Network", and then depressing the "Select" soft key button.
� IP connectivity to the SIP phone. Once the router and switch are installed, a local
machine on the customer’s network is used to pull the setup for the SIP phones.
PPhhoonnee SSeettuupp
There are two methods for setting up your Cisco or Linksys SPA phones outlined in this
document.
OOppttiioonn 11:: HHTTTTPP
Manually enter the IP address and the device name of the phone into the URL string
using the example below.
http://(Phone IP Address)/admin/resync?http://xs.voice.dsl.net/dms/(Device Name)/$MA.xml
© 2010 MegaPath Inc. All rights reserved. Confidential and Proprietary 3
For example:
If you have a Linksys SPA 942, with an IP address of 192.168.1.100, enter the following
in your browser:
http://192.168.1.100/admin/resync?http://xs.voice.dsl.net/dms/Linksys_SPA942/$MA.xml
RReessyynncc tthhee PPhhoonnee
Once you have entered the information for the specific phone, cut and paste the
completed URL into the browser of the local machine, and hit enter. This step will
resync the phone.
RReebboooott tthhee PPhhoonnee
You will be directed to a webpage that will display messaging about the SPA phone will
resync once the phone is rebooted, and then direct you to enter a URL to reboot the
phone so that it can be synched to the MegaPath Duet Hosted service.
Manually enter the IP address of the phone where indicated (see below). Cut and paste
the completed URL into the browser of the local machine, and hit enter.
http ://(Phone IP Address)/admin/reboot
For example:
If the IP address of the phone is 192.168.1.100, enter the following into your browser:
http://192.168.1.100/admin/reboot
The phone will now reboot and sync to the MegaPath Duet Hosted service.
© 2010 MegaPath Inc. All rights reserved. Confidential and Proprietary 4
OOppttiioonn 22:: HHTTTTPP iinnttoo tthhee PPhhoonnee
LLiinnkkssyyss SSPPAA PPhhoonneess
Step 1
Enter the IP address of the phone into your web browser. For example purposes we
will use the IP address: 192.168.20.12.
http://192.168.20.12
Note: If the phone prompts for a "login", enter your current login information. If you
do not know the login information, you may need to factory default your phone.
Step 2
From the default page select "Admin Login" which is located at the top right hand
corner of the web page. See arrow below.
© 2010 MegaPath Inc. All rights reserved. Confidential and Proprietary 5
Step 3
From the default page select "advanced” which is located at the top right hand corner.
See arrow below.
© 2010 MegaPath Inc. All rights reserved. Confidential and Proprietary 6
Step 4
Select the "Provisioning" tab. See arrow below.
© 2010 MegaPath Inc. All rights reserved. Confidential and Proprietary 7
Step 5
Enter the following into the “Profile Rule” Field (see arrow below) using the following
format: http://xs.voice.dsl.net/dms/DEVICE/$MA.xml
In this example, for a Linksys SPA 942 you would enter:
http://xs.voice.dsl.net/dms/Linksys_SPA942/$MA.xml
© 2010 MegaPath Inc. All rights reserved. Confidential and Proprietary 8
Step 6
Submit the changes by clicking on the "Submit All Changes" button at the bottom of the
page. See arrow below.
SStteepp 77
The phones will resync to Duet Hosted service and reboot.
© 2010 MegaPath Inc. All rights reserved. Confidential and Proprietary 9
CCiissccoo SSPPAA PPhhoonneess
Step 1
Enter the IP address of the phone into your web browser. For example purposes we
will use the IP address: 192.168.20.102.
http://192.168.20.102
Note: If the phone prompts for a "login", enter your current login information. If you
do not know the login information, you will need to factory default your phone.
Step 2
From the default page select "Admin Login" which is located at the top right hand
corner of the web page. See arrow below.
© 2010 MegaPath Inc. All rights reserved. Confidential and Proprietary 10
Step 3
From the default page select "advanced” which is located at the top right hand corner.
See arrow below.
© 2010 MegaPath Inc. All rights reserved. Confidential and Proprietary 11
Step 4
Select the "Provisioning" tab. See arrow below.
© 2010 MegaPath Inc. All rights reserved. Confidential and Proprietary 12
Step 5
Enter the following into the “Profile Rule” Field (see arrow below) using the following
format: http://xs.voice.dsl.net/dms/DEVICE/$MA.xml
In this example, for a Cisco SPA 504 you would enter:
http://xs.voice.dsl.net/dms/Cisco_SPA504/$MA.xml
If you are not sure what to enter into the DEVICE section of the URL please contact
MegaPath Technical Support.
© 2010 MegaPath Inc. All rights reserved. Confidential and Proprietary 13
Step 6
Submit the changes by clicking on the "Submit All Changes" button at the bottom of the
page. See arrow below.
SStteepp 77
The phones will resync to Duet Hosted service and reboot.