cisco mds 9000 family and nexus 7000 series nx …...i cisco mds 9000 family and nexus 7000 series...

Cisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages ReferenceJuly 2014

Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706 USAhttp://www.cisco.comTel: 408 526-4000

800 553-NETS (6387)Fax: 408 527-0883

Text Part Number: OL-29318-02

http://www.cisco.com

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

Cisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference© 2013-2014 Cisco Systems, Inc. All rights reserved.

http://www.cisco.com/go/trademarks

CisOL-29318-02

C O N T E N T S

Preface xvii

Audience xvii

Organization xvii

Document Conventions xviii

Documentation Feedback xviii

Obtaining Documentation and Submitting a Service Request xix

C H A P T E R 1 Introduction to System Messages for Cisco NX-OS 1-1

System Log Message Format 1-1Syslog Format On a Resident Switch 1-1Syslog Format On a Remote-Logging Server 1-3

Capturing System Messages and History 1-5Saving the System Messages Log 1-5Logging System Messages to a Syslog Server 1-5

C H A P T E R 2 System Messages and Recovery Procedures for the Cisco MDS 9000 and Nexus 7000 Family 2-1AAA Messages 2-1

AAA-1 2-1AAA-2 2-1AAA-3 2-2AAA-6 2-2

AAM Messages 2-2AAM-2 2-2AAM-3 2-2

ACLLOG Messages 2-3ACLLOG-4 2-3ACLLOG-6 2-3

ACLMGR Messages 2-3ACLMGR-2 2-4ACLMGR-3 2-5ACLMGR-4 2-6ACLMGR-6 2-7

ACLQOS Messages 2-8ACLQOS-SLOT#-2 2-8

ico MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

Contents

ACLQOS-SLOT#-3 2-8ACLQOS-SLOT#-4 2-9ACLQOS-SLOT#-5 2-10

ACLTCAM Messages 2-11ACLTCAM-2 2-11ACLTCAM-3 2-14ACLTCAM-4 2-16ACLTCAM-6 2-17

ACL Messages 2-17ACL-2 2-17ACL-3 2-19ACL-4 2-19ACL-5 2-20ACL-6 2-20

AGNI-DPP Messages 2-21AGNI-DPP-2 2-21AGNI-DPP-6 2-22

AGNIL2F Messages 2-22AGNIL2F-6 2-22

ALI_LC Messages 2-23ALI_LC-2 2-23

AMM Messages 2-23AMM-SLOT#-0 2-23AMM-SLOT#-2 2-24AMM-SLOT#-6 2-24

APP EMULATOR Messages 2-24APP EMULATOR-SLOT#-5 2-24

ARBITER Messages 2-25ARBITER-2 2-25

ASCII-CFG Messages 2-25ASCII-CFG-2 2-26ASCII-CFG-3 2-27ASCII-CFG-6 2-27

ASSOC MGR Messages 2-28ASSOC MGR-0 2-28ASSOC MGR-1 2-29ASSOC MGR-2 2-29ASSOC MGR-3 2-29ASSOC MGR-4 2-29ASSOC MGR-5 2-29

iiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

ASSOC MGR-6 2-30ASSOC MGR-7 2-31

ATLANTIS_APP Messages 2-31ATLANTIS_APP-SLOT#-2 2-31

AZUMA Messages 2-31AZUMA-2 2-31AZUMA-6 2-32

BET Messages 2-32BET-6 2-32

BFDC Messages 2-32BFDC-SLOT#-2 2-32

BFD Messages 2-33BFD-3 2-33BFD-4 2-33BFD-5 2-34BFD-6 2-35

BIOS DAEMON Messages 2-36BIOS DAEMON-2 2-36BIOS DAEMON-5 2-36BIOS DAEMON-SLOT#-2 2-36BIOS DAEMON-SLOT#-5 2-37

BLOGGERD Messages 2-37BLOGGERD-2 2-37BLOGGERD-3 2-37BLOGGERD-4 2-39BLOGGERD-6 2-39

2-39

BOOTUP TEST Messages 2-39BOOTUP TEST-2 2-39

BOOTVAR Messages 2-40BOOTVAR-2 2-40BOOTVAR-3 2-41BOOTVAR-5 2-42BOOTVAR-6 2-43

CALLHOME Messages 2-43CALLHOME-2 2-44CALLHOME-3 2-44CALLHOME-6 2-45

CARDCLIENT Messages 2-45CARDCLIENT-2 2-45

iiiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

CARDCLIENT-3 2-46CARDCLIENT-SLOT#-2 2-46

2-46

CDP Messages 2-46CDP-2 2-47CDP-3 2-47CDP-4 2-48CDP-5 2-49CDP-6 2-49

CERT_ENROLL Messages 2-50CERT_ENROLL-2 2-50CERT_ENROLL-3 2-51CERT_ENROLL-6 2-51

CFGD Messages 2-51CFGD-SLOT#-2 2-51

CFS Messages 2-51CFS-2 2-52CFS-3 2-53CFS-4 2-55CFS-6 2-55

CIMSRVPROV Messages 2-58CIMSRVPROV-2 2-58CIMSRVPROV-3 2-58CIMSRVPROV-6 2-59

CLIS Messages 2-59CLIS-5 2-59CLIS-6 2-60

CLK_MGR Messages 2-60CLK_MGR-2 2-60CLK_MGR-5 2-60CLK_MGR-6 2-60

CLOUD Messages 2-61CLOUD-2 2-61CLOUD-3 2-61CLOUD-6 2-62

CLP_FWD Messages 2-62CLP_FWD-6 2-62

CLP_L3 Messages 2-62CLP_L3-6 2-62

CLP_MAC Messages 2-62

ivCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

CLP_MAC-6 2-63CLP_XBAR Messages 2-63

CLP_XBAR-2 2-63CLP_XBAR-6 2-63

CLUSTER_TEST_APP Messages 2-63CLUSTER_TEST_APP-5 2-63

CLUSTER Messages 2-64CLUSTER-2 2-64CLUSTER-5 2-67

CMOND Messages 2-69CMOND-2 2-69

CMPPROXY Messages 2-70CMPPROXY-2 2-70CMPPROXY-5 2-70CMPPROXY-6 2-71

COPP Messages 2-71COPP-1 2-71COPP-2 2-71COPP-3 2-72COPP-4 2-73COPP-5 2-73COPP-6 2-74COPP-7 2-74

CORE-DMON Messages 2-75CORE-DMON-2 2-75CORE-DMON-3 2-75

CRDCFG Messages 2-75CRDCFG-2 2-75CRDCFG-3 2-76CRDCFG-SLOT#-2 2-76

2-76

CREDITMON Messages 2-76CREDITMON-SLOT#-2 2-77

CTS Messages 2-77CTS-2 2-77CTS-3 2-80CTS-5 2-80CTS-6 2-80CTS-7 2-83

DCEFIB Messages 2-84

vCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

DCEFIB-SLOT#-0 2-84DCEFIB-SLOT#-2 2-84DCEFIB-SLOT#-6 2-85

DEBUGPROXY Messages 2-85DEBUGPROXY-6 2-85

DEVICE-ALIAS Messages 2-85DEVICE-ALIAS-2 2-86DEVICE-ALIAS-3 2-86DEVICE-ALIAS-6 2-89

DEVICE_TEST Messages 2-91DEVICE_TEST-2 2-92DEVICE_TEST-3 2-94DEVICE_TEST-4 2-95DEVICE_TEST-5 2-96DEVICE_TEST-6 2-96

DEV_LOG_SUP Messages 2-96DEV_LOG_SUP-3 2-96

2-96

DEV_LOG Messages 2-96DEV_LOG-3 2-96DEV_LOG-SLOT#-4 2-97

DFTM Messages 2-97DFTM-SLOT#-2 2-97DFTM-SLOT#-3 2-98

DHCP_SNOOP Messages 2-99DHCP_SNOOP-2 2-100DHCP_SNOOP-3 2-100DHCP_SNOOP-4 2-102DHCP_SNOOP-5 2-104DHCP_SNOOP-6 2-105

DIAGCLIENT Messages 2-106DIAGCLIENT-2 2-107DIAGCLIENT-3 2-107DIAGCLIENT-4 2-107DIAGCLIENT-5 2-108DIAGCLIENT-7 2-109

DIAGMGR Messages 2-109DIAGMGR-2 2-109DIAGMGR-3 2-110DIAGMGR-4 2-110

viCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

DIAGMGR-5 2-111DIAGMGR-6 2-112

DIAG_PORT_LB Messages 2-112DIAG_PORT_LB-2 2-113DIAG_PORT_LB-3 2-114DIAG_PORT_LB-4 2-117DIAG_PORT_LB-5 2-117

DMM Messages 2-118DMM-SLOT#-2 2-118DMM-SLOT#-5 2-118

DOT1X Messages 2-120DOT1X-2 2-120DOT1X-3 2-120DOT1X-4 2-122DOT1X-5 2-123DOT1X-6 2-124

DPP_DEBUG Messages 2-124DPP_DEBUG-2 2-125

DPVM Messages 2-125DPVM-2 2-125DPVM-3 2-125DPVM-4 2-126DPVM-6 2-126

DSTATS Messages 2-127DSTATS-2 2-127DSTATS-3 2-127

DT_HELPER Messages 2-129DT_HELPER-2 2-129

ELTMC Messages 2-129ELTMC-2 2-129

ELTM Messages 2-132ELTM-2 2-132ELTM-3 2-133ELTM-5 2-133ELTM-6 2-134

EOU Messages 2-134EOU-2 2-134EOU-5 2-134EOU-6 2-134EOU-7 2-136

viiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

EPLD_AUTO Messages 2-137EPLD_AUTO-2 2-137

EPLD_UPGRADE Messages 2-137EPLD_UPGRADE-2 2-137

EPP Messages 2-138EPP-5 2-138

ETH-PORT-SEC Messages 2-138ETH-PORT-SEC-3 2-138ETH-PORT-SEC-5 2-140

ETHPORT Messages 2-140ETHPORT-2 2-141ETHPORT-3 2-141ETHPORT-4 2-143ETHPORT-5 2-143

ETH_PORT_CHANNEL Messages 2-154ETH_PORT_CHANNEL-1 2-154ETH_PORT_CHANNEL-2 2-155ETH_PORT_CHANNEL-3 2-155ETH_PORT_CHANNEL-4 2-158ETH_PORT_CHANNEL-5 2-158ETH_PORT_CHANNEL-6 2-161ETH_PORT_CHANNEL-7 2-161

EUREKA_USD Messages 2-162EUREKA_USD-3 2-162

EVMC Messages 2-162EVMC-3 2-162EVMC-4 2-162EVMC-5 2-163

EVMED Messages 2-163EVMED-2 2-163EVMED-5 2-163

EVMS Messages 2-164EVMS-2 2-164EVMS-4 2-164EVMS-6 2-165

EXAMPLE_TEST Messages 2-165EXAMPLE_TEST-5 2-165

EXCEPTIONLOG Messages 2-165EXCEPTIONLOG-SLOT#-2 2-165

EX_SYSLOG Messages 2-165

viiiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

EX_SYSLOG-0 2-166EX_SYSLOG-1 2-166EX_SYSLOG-2 2-166EX_SYSLOG-3 2-166EX_SYSLOG-4 2-166EX_SYSLOG-5 2-167EX_SYSLOG-6 2-167EX_SYSLOG-7 2-167

F16_CMN_USD Messages 2-167F16_CMN_USD-6 2-167

F16_FWD_USD Messages 2-167F16_FWD_USD-6 2-168

F16_MAC_USD Messages 2-168F16_MAC_USD-3 2-168F16_MAC_USD-6 2-168

F16_QUE_USD Messages 2-168F16_QUE_USD-6 2-168

F16_XBAR_USD Messages 2-169F16_XBAR_USD-6 2-169

FABRICPATH Messages 2-169FABRICPATH-2 2-169FABRICPATH-4 2-169FABRICPATH-6 2-170

FALCON Messages 2-171FALCON-SLOT#-2 2-171

FC-REDIRECT Messages 2-171FC-REDIRECT-2 2-172FC-REDIRECT-3 2-178FC-REDIRECT-5 2-187

FC-TUNNEL Messages 2-191FC-TUNNEL-3 2-191FC-TUNNEL-5 2-193

FCC_LC Messages 2-194FCC_LC-2 2-194FCC_LC-5 2-194FCC_LC-6 2-195

FCC Messages 2-195FCC-2 2-195FCC-5 2-195FCC-6 2-196

ixCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

FCDDH Messages 2-197FCDDH-SLOT#-3 2-197FCDDH-SLOT#-4 2-197FCDDH-SLOT#-5 2-197

FCDD Messages 2-197FCDD-SLOT#-3 2-197FCDD-SLOT#-4 2-198FCDD-SLOT#-5 2-198FCDD-SLOT#-7 2-199

FCDOMAIN Messages 2-199FCDOMAIN-2 2-199FCDOMAIN-3 2-202FCDOMAIN-4 2-204FCDOMAIN-5 2-205FCDOMAIN-6 2-206FCDOMAIN-7 2-212

FCD Messages 2-214FCD-7 2-214

FCFWD Messages 2-215FCFWD-3 2-215FCFWD-4 2-215FCFWD-6 2-215

FCNS Messages 2-215FCNS-2 2-216FCNS-3 2-216FCNS-4 2-217FCNS-6 2-217

FCOE_MGR Messages 2-218FCOE_MGR-2 2-218FCOE_MGR-5 2-218

FCOE Messages 2-219FCOE-5 2-219

FCSP-MGR Messages 2-220FCSP-MGR-2 2-220

FCS Messages 2-222FCS-2 2-222FCS-3 2-223FCS-5 2-224FCS-6 2-224

FDMI Messages 2-225

xCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

FDMI-2 2-225FDMI-3 2-226FDMI-4 2-227FDMI-6 2-227

FEATURE-MGR Messages 2-227FEATURE-MGR-2 2-227FEATURE-MGR-6 2-230

FEX Messages 2-231FEX-2 2-231FEX-4 2-232FEX-5 2-232

FIB Messages 2-233FIB-SLOT#-0 2-233FIB-SLOT#-1 2-233FIB-SLOT#-2 2-234FIB-SLOT#-3 2-234FIB-SLOT#-4 2-235FIB-SLOT#-6 2-236

FICON Messages 2-236FICON-2 2-237FICON-3 2-237FICON-5 2-239FICON-6 2-239

FIPSM Messages 2-239FIPSM-5 2-240

FIPS Messages 2-240FIPS-0 2-240FIPS-6 2-240

FLN_EM Messages 2-240FLN_EM-6 2-241

FLN_FCP Messages 2-241FLN_FCP-6 2-241FLN_FCP-SLOT#-2 2-241FLN_FCP-SLOT#-3 2-241FLN_FCP-SLOT#-4 2-242

FLN_FWD_USD Messages 2-243FLN_FWD_USD-2 2-243FLN_FWD_USD-6 2-243

FLN_L3 Messages 2-243FLN_L3-6 2-244

xiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

FLN_QUE Messages 2-244FLN_QUE-6 2-244

FLN_XBAR Messages 2-244FLN_XBAR-2 2-244FLN_XBAR-6 2-244

FLOGI Messages 2-245FLOGI-1 2-245FLOGI-2 2-246FLOGI-4 2-246FLOGI-5 2-246

FS-DAEMON Messages 2-247FS-DAEMON-2 2-247FS-DAEMON-6 2-247

FSCM Messages 2-248FSCM-2 2-248

FSPF Messages 2-248FSPF-2 2-248FSPF-2 2-249FSPF-4 2-251FSPF-5 2-252FSPF-6 2-252FSPF-7 2-254

FVP Messages 2-254FVP-2 2-254FVP-3 2-255FVP-4 2-256FVP-6 2-256

GARUDA_USD Messages 2-258GARUDA_USD-6 2-258

GLBP Messages 2-258GLBP-2 2-258GLBP-3 2-258GLBP-4 2-260GLBP-5 2-261

HSRP_ENGINE Messages 2-263HSRP_ENGINE-3 2-264HSRP_ENGINE-4 2-265HSRP_ENGINE-5 2-266HSRP_ENGINE-6 2-268

IDEHSD Messages 2-268

xiiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

IDEHSD-1 2-268IDEHSD-2 2-268IDEHSD-3 2-270IDEHSD-5 2-270IDEHSD-6 2-270IDEHSD-7 2-271

IFTMC Messages 2-271IFTMC-SLOT#-1 2-271IFTMC-SLOT#-2 2-271

IKE Messages 2-274IKE-3 2-274IKE-4 2-276IKE-6 2-277

ILC-SPAN Messages 2-277ILC-SPAN-3 2-277

ILC_HELPER Messages 2-277ILC_HELPER-2 2-277ILC_HELPER-3 2-277ILC_HELPER-6 2-278

IMAGE_DNLD Messages 2-278IMAGE_DNLD-SLOT#-2 2-278IMAGE_DNLD-SLOT#-4 2-279IMAGE_DNLD-SLOT#-5 2-279

IMAGE_UPGRADE Messages 2-280IMAGE_UPGRADE-SLOT#-2 2-280IMAGE_UPGRADE-SLOT#-4 2-280

IM Messages 2-280IM-3 2-280IM-5 2-281

INSTALLER Messages 2-281INSTALLER-1 2-281INSTALLER-5 2-282

INTERFACE_VLAN Messages 2-282INTERFACE_VLAN-4 2-282INTERFACE_VLAN-5 2-283

IOA_LC Messages 2-285IOA_LC-5 2-285

IPACL Messages 2-285IPACL-0 2-285IPACL-1 2-286

xiiiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

IPACL-2 2-286IPACL-3 2-286IPACL-4 2-286IPACL-5 2-286IPACL-6 2-287

IPFC Messages 2-287IPFC-2 2-287IPFC-3 2-287IPFC-5 2-288IPFC-6 2-288

IPQOSMGR Messages 2-288IPQOSMGR-2 2-288IPQOSMGR-3 2-289IPQOSMGR-4 2-290IPQOSMGR-6 2-291

IPSEC Messages 2-291IPSEC-2 2-291IPSEC-3 2-291IPSEC-5 2-292

IPS_SB_MGR Messages 2-293IPS_SB_MGR-SLOT#-2 2-294IPS_SB_MGR-SLOT#-3 2-294IPS_SB_MGR-SLOT#-4 2-295IPS_SB_MGR-SLOT#-6 2-295

IPS Messages 2-295IPS-2 2-296IPS-3 2-296IPS-4 2-301IPS-5 2-302IPS-6 2-311IPS-7 2-311

IPV6 Messages 2-312IPV6-2 2-312IPV6-3 2-312IPV6-4 2-313IPV6-6 2-313

IP Messages 2-314IP-1 2-314IP-2 2-314IP-3 2-314

xivCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

IP-4 2-315IP-6 2-315

ISAPI Messages 2-316ISAPI-SLOT#-0 2-316ISAPI-SLOT#-1 2-317ISAPI-SLOT#-2 2-317ISAPI-SLOT#-3 2-318ISAPI-SLOT#-4 2-319ISAPI-SLOT#-5 2-319ISAPI-SLOT#-6 2-320ISAPI-SLOT#-7 2-321

ISCM Messages 2-322ISCM-2 2-322ISCM-3 2-322ISCM-4 2-323ISCM-5 2-324

ISNS Messages 2-324ISNS-2 2-324

IVR Messages 2-324IVR-2 2-325IVR-3 2-328IVR-4 2-336IVR-5 2-337IVR-6 2-340IVR-7 2-341

L2FMC Messages 2-341L2FMC-SLOT#-0 2-342L2FMC-SLOT#-2 2-342L2FMC-SLOT#-5 2-342L2FMC-SLOT#-6 2-343

L2FM Messages 2-344L2FM-0 2-344L2FM-1 2-344L2FM-2 2-346L2FM-4 2-346L2FM-5 2-347L2FM-6 2-347

L2MCAST Messages 2-347L2MCAST-SLOT#-0 2-347L2MCAST-SLOT#-2 2-348

xvCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

L2MCAST-SLOT#-3 2-348L2MCAST-SLOT#-6 2-349

L3VM Messages 2-349L3VM-5 2-350

LACP Messages 2-350LACP-3 2-350LACP-5 2-351

LC-FCFWD Messages 2-353LC-FCFWD-3 2-353

LC-QOS Messages 2-353LC-QOS-3 2-353

LC-SPAN Messages 2-353LC-SPAN-3 2-353

LC_CFG Messages 2-353LC_CFG-SLOT#-2 2-354

LC_MNT_MGR Messages 2-354LC_MNT_MGR-SLOT#-2 2-354

LC_PORT_CHANNEL Messages 2-354LC_PORT_CHANNEL-SLOT#-0 2-354LC_PORT_CHANNEL-SLOT#-1 2-355LC_PORT_CHANNEL-SLOT#-3 2-355

LC_PORT_MGR Messages 2-355LC_PORT_MGR-SLOT#-2 2-355

LC_RDL Messages 2-356LC_RDL-3 2-356LC_RDL-6 2-357

LDAP Messages 2-357LDAP-2 2-357LDAP-3 2-357LDAP-5 2-358LDAP-6 2-358

LDP Messages 2-358LDP-5 2-358

LED_MGR Messages 2-358LED_MGR-SLOT#-3 2-359

LIBBASE_SVC Messages 2-359LIBBASE_SVC-2 2-359LIBBASE_SVC-4 2-359LIBBASE_SVC-5 2-360

LIBGD Messages 2-360

xviCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

LIBGD-2 2-360LIBGD-3 2-361LIBGD-5 2-361LIBGD-6 2-361

LIBIFMGR Messages 2-362LIBIFMGR-5 2-362

LICMGR Messages 2-362LICMGR-0 2-362LICMGR-1 2-362LICMGR-2 2-363LICMGR-3 2-364LICMGR-4 2-365LICMGR-6 2-365

LIM Messages 2-366LIM-2 2-366




LIT Messages 2-379LIT-6 2-380

LLDP Messages 2-380LLDP-1 2-380LLDP-3 2-380LLDP-5 2-381LLDP-6 2-381

M2FIB Messages 2-381M2FIB-SLOT#-0 2-381M2FIB-SLOT#-2 2-382M2FIB-SLOT#-6 2-382

M2RIB Messages 2-383M2RIB-0 2-383M2RIB-2 2-383M2RIB-6 2-384

MAC Messages 2-385MAC-SLOT#-2 2-385

MCAST Messages 2-385MCAST-2 2-385

xviiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

MCAST-4 2-385MCAST-5 2-386

MCECTEST Messages 2-386MCECTEST-3 2-386MCECTEST-5 2-387MCECTEST-6 2-387

MCM Messages 2-387MCM-2 2-387MCM-5 2-388MCM-6 2-388

METROPOLIS_USD Messages 2-388METROPOLIS_USD-3 2-388

MFDM Messages 2-388MFDM-2 2-389

MODULE Messages 2-389MODULE-2 2-390MODULE-3 2-394MODULE-4 2-394MODULE-5 2-395MODULE-6 2-396

MONITOR Messages 2-396MONITOR-3 2-397MONITOR-5 2-397

MTM Messages 2-397MTM-SLOT#-0 2-398





NFM Messages 2-401NFM-2 2-401NFM-3 2-402NFM-4 2-403NFM-5 2-404NFM-6 2-404NFM-7 2-405

xviiiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

NFP Messages 2-405NFP-SLOT#-2 2-406NFP-SLOT#-5 2-407

NPC Messages 2-407NPC-SLOT#-3 2-407NPC-SLOT#-4 2-407NPC-SLOT#-5 2-407

NPV Messages 2-408NPV-2 2-408NPV-3 2-409NPV-4 2-412NPV-5 2-412NPV-6 2-413NPV-7 2-416

NTP Messages 2-417NTP-2 2-417NTP-3 2-417NTP-6 2-418

NVP Messages 2-418NVP-6 2-418NVP-SLOT#-2 2-419

OBFL Messages 2-419OBFL-3 2-419

OC_USD Messages 2-419OC_USD-2 2-419

ONEP Messages 2-419ONEP-2 2-420ONEP-3 2-421ONEP-4 2-423ONEP-6 2-423

ORI_FWD Messages 2-423ORI_FWD-2 2-423ORI_FWD-6 2-423

ORI_MAC Messages 2-423ORI_MAC-2 2-424ORI_MAC-6 2-424

ORI_XBAR_USD Messages 2-424ORI_XBAR_USD-2 2-424ORI_XBAR_USD-4 2-425ORI_XBAR_USD-6 2-425

xixCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

OTM Messages 2-425OTM-2 2-425OTM-3 2-425OTM-5 2-425OTM-6 2-426

PHY_USD Messages 2-426PHY_USD-SLOT#-4 2-427

PIXM Messages 2-427PIXM-2 2-427PIXM-3 2-427PIXM-4 2-427PIXM-7 2-428

PLATFORM Messages 2-428PLATFORM-0 2-428PLATFORM-1 2-431PLATFORM-2 2-432PLATFORM-3 2-444PLATFORM-4 2-446PLATFORM-5 2-446PLATFORM-6 2-448PLATFORM-7 2-448

PLOG_SUP Messages 2-449PLOG_SUP-4 2-449

PLOG Messages 2-449PLOG-4 2-449

PLSM Messages 2-449PLSM-3 2-449PLSM-6 2-450

PLTFM_CONFIG Messages 2-450PLTFM_CONFIG-3 2-450PLTFM_CONFIG-4 2-451

PLUGIN Messages 2-451PLUGIN-2 2-451PLUGIN-3 2-453

PMON Messages 2-453PMON-2 2-453PMON-3 2-454PMON-5 2-454PMON-6 2-454

POAP Messages 2-454

xxCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

POAP-2 2-454POAP-5 2-456

PONG Messages 2-456PONG-5 2-456

PORT-CHANNEL Messages 2-457PORT-CHANNEL-1 2-457PORT-CHANNEL-2 2-457PORT-CHANNEL-3 2-458PORT-CHANNEL-4 2-459PORT-CHANNEL-5 2-460PORT-CHANNEL-6 2-461PORT-CHANNEL-7 2-461

PORT-PROFILE Messages 2-462PORT-PROFILE-2 2-462PORT-PROFILE-3 2-462PORT-PROFILE-6 2-464

PORT-RESOURCES Messages 2-465PORT-RESOURCES-3 2-465PORT-RESOURCES-5 2-466

PORT-SECURITY Messages 2-466PORT-SECURITY-2 2-466PORT-SECURITY-3 2-466PORT-SECURITY-4 2-468PORT-SECURITY-6 2-469

PORT Messages 2-469PORT-2 2-469PORT-3 2-469PORT-4 2-470PORT-5 2-471

PREFPATH Messages 2-491PREFPATH-1 2-492PREFPATH-2 2-492PREFPATH-3 2-493PREFPATH-4 2-494PREFPATH-6 2-494

PRIVATE_VLAN Messages 2-495PRIVATE_VLAN-2 2-495PRIVATE_VLAN-3 2-496PRIVATE_VLAN-5 2-497

PROC_MGR Messages 2-497

xxiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

PROC_MGR-SLOT#-2 2-497PROC_MGR-SLOT#-3 2-500PROC_MGR-SLOT#-4 2-500PROC_MGR-SLOT#-6 2-500

PROFILER Messages 2-500PROFILER-0 2-501PROFILER-1 2-501PROFILER-2 2-501PROFILER-3 2-501PROFILER-4 2-501PROFILER-5 2-502PROFILER-6 2-502PROFILER-7 2-502

2-502

PSS Messages 2-502PSS-0 2-502PSS-1 2-503PSS-2 2-504PSS-4 2-505PSS-5 2-505

PTPLC Messages 2-506PTPLC-3 2-506

PTP Messages 2-506PTP-5 2-506PTP-6 2-507

PULSE Messages 2-508PULSE-0 2-508PULSE-1 2-508PULSE-2 2-508PULSE-3 2-508PULSE-4 2-509PULSE-5 2-509PULSE-6 2-509PULSE-7 2-509

QD Messages 2-509QD-3 2-509

QOS Messages 2-510QOS-2 2-510QOS-3 2-511QOS-4 2-512

xxiiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

QOS-6 2-513QUACK_SMC Messages 2-515

QUACK_SMC-6 2-515R2D2_USD Messages 2-515

R2D2_USD-2 2-515R2D2_USD-6 2-515

RADIUS Messages 2-516RADIUS-2 2-516RADIUS-3 2-516RADIUS-4 2-516RADIUS-5 2-516RADIUS-6 2-517

RDL Messages 2-517RDL-2 2-517RDL-3 2-518RDL-6 2-518

RES_MGR Messages 2-519RES_MGR-1 2-519RES_MGR-2 2-520RES_MGR-3 2-520RES_MGR-4 2-521RES_MGR-5 2-522RES_MGR-6 2-522

RIB Messages 2-523RIB-0 2-523RIB-1 2-523RIB-2 2-523RIB-3 2-523RIB-4 2-525RIB-5 2-525RIB-6 2-526

RLIR Messages 2-526RLIR-2 2-526RLIR-6 2-527

RM Messages 2-527RM-6 2-527RM-SLOT#-2 2-528RM-SLOT#-4 2-529

RSCN Messages 2-529RSCN-2 2-529

xxiiiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

RSCN-4 2-530RSCN-6 2-530

SABRE_APP Messages 2-530SABRE_APP-SLOT#-2 2-531

SAC_USD Messages 2-531SAC_USD-2 2-531SAC_USD-3 2-532SAC_USD-5 2-533SAC_USD-6 2-533

SAL Messages 2-534SAL-5 2-534

SANTAP Messages 2-534SANTAP-SLOT#-2 2-534SANTAP-SLOT#-4 2-541SANTAP-SLOT#-5 2-543SANTAP-SLOT#-6 2-543

SAN_EXT_TUNER Messages 2-545SAN_EXT_TUNER-3 2-545

SCHEDULER Messages 2-545SCHEDULER-2 2-546SCHEDULER-3 2-546SCHEDULER-4 2-547SCHEDULER-6 2-547

SCM Messages 2-547SCM-2 2-547

SCSI-TARGET Messages 2-547SCSI-TARGET-2 2-548SCSI-TARGET-3 2-548SCSI-TARGET-7 2-550

SDV Messages 2-550SDV-2 2-550SDV-3 2-551SDV-4 2-553SDV-6 2-553SDV-7 2-553

SECURITYD Messages 2-553SECURITYD-2 2-553SECURITYD-3 2-555SECURITYD-6 2-555

SENSOR_USD Messages 2-556

xxivCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

SENSOR_USD-2 2-556SENSOR_USD-3 2-557SENSOR_USD-5 2-558

SENSOR_MGR Messages 2-558SENSOR_MGR-2 2-558SENSOR_MGR-3 2-558SENSOR_MGR-4 2-559

SENSOR Messages 2-559SENSOR-0 2-559SENSOR-3 2-559

SESSION-MGR Messages 2-559SESSION-MGR-2 2-559SESSION-MGR-3 2-560SESSION-MGR-4 2-560

SFC Messages 2-560SFC-3 2-560

SFM Messages 2-560SFM-2 2-560SFM-6 2-561

SIM Messages 2-561SIM-2 2-561SIM-3 2-562SIM-4 2-563SIM-5 2-563

2-574

SKSD Messages 2-574SKSD-2 2-574SKSD-3 2-574SKSD-4 2-575SKSD-5 2-575SKSD-6 2-577

SKT_USD Messages 2-577SKT_USD-2 2-577SKT_USD-6 2-577

SKYLINE_APP Messages 2-577SKYLINE_APP-SLOT#-2 2-577

SME_CPP Messages 2-577SME_CPP-2 2-578SME_CPP-3 2-579SME_CPP-5 2-584

xxvCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

SME_CPP-SLOT#-2 2-588SME_CPP-SLOT#-3 2-589SME_CPP-SLOT#-4 2-593

SNMPD Messages 2-593SNMPD-1 2-593SNMPD-2 2-593SNMPD-3 2-593SNMPD-4 2-593SNMPD-5 2-594SNMPD-6 2-594SNMPD-7 2-594

SPAN Messages 2-594SPAN-2 2-594SPAN-3 2-594SPAN-5 2-595SPAN-6 2-596

SPI Messages 2-596SPI-SLOT#-2 2-596

STATSCLIENT Messages 2-596STATSCLIENT-2 2-597STATSCLIENT-3 2-597STATSCLIENT-6 2-597

STATSINFRA Messages 2-597STATSINFRA-3 2-597

STATSPROFILER Messages 2-598STATSPROFILER-2 2-598STATSPROFILER-3 2-599STATSPROFILER-4 2-600STATSPROFILER-5 2-601

STP Messages 2-611STP-2 2-612STP-3 2-619STP-4 2-620STP-6 2-621

SVC_BATTERY Messages 2-623SVC_BATTERY-SLOT#-2 2-623SVC_BATTERY-SLOT#-4 2-625SVC_BATTERY-SLOT#-6 2-625

SVC Messages 2-626SVC-0 2-626

xxviCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

SVC-1 2-626SVC-2 2-626SVC-3 2-627SVC-4 2-639SVC-5 2-648SVC-6 2-648SVC-7 2-663

SYSMGR Messages 2-663SYSMGR-2 2-664SYSMGR-3 2-687SYSMGR-4 2-696SYSMGR-5 2-698SYSMGR-6 2-703SYSMGR-7 2-705

SYSTEM HEALTH LC Messages 2-707SYSTEM HEALTH LC-2 2-707SYSTEM HEALTH LC-4 2-708SYSTEM HEALTH LC-6 2-710

SYSTEMHEALTH Messages 2-710SYSTEMHEALTH-2 2-711SYSTEMHEALTH-4 2-714SYSTEMHEALTH-5 2-719SYSTEMHEALTH-6 2-721

TACACS Messages 2-723TACACS-2 2-723TACACS-3 2-723TACACS-4 2-723TACACS-5 2-723TACACS-6 2-724

TBIRD_CMN_USD Messages 2-724TBIRD_CMN_USD-6 2-724

TBIRD_FWD_USD Messages 2-724TBIRD_FWD_USD-6 2-724

TBIRD_MAC_USD Messages 2-725TBIRD_MAC_USD-3 2-725TBIRD_MAC_USD-6 2-725

TBIRD_QUE_USD Messages 2-725TBIRD_QUE_USD-6 2-725

TBIRD_XBAR_USD Messages 2-725TBIRD_XBAR_USD-6 2-725

xxviiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

TCAP Messages 2-726TCAP-2 2-726

TIM Messages 2-726TIM-2 2-726




TLPORT Messages 2-739TLPORT-2 2-740TLPORT-3 2-740TLPORT-4 2-741TLPORT-6 2-741

TPC Messages 2-741TPC-SLOT#-5 2-742

TTYD Messages 2-742TTYD-2 2-743TTYD-3 2-743TTYD-6 2-743

TUNNEL Messages 2-743TUNNEL-2 2-744TUNNEL-3 2-744TUNNEL-4 2-744TUNNEL-5 2-745TUNNEL-7 2-746

TUSCANY_APP Messages 2-746TUSCANY_APP-SLOT#-2 2-746

U2RIB Messages 2-746U2RIB-2 2-747U2RIB-3 2-747U2RIB-5 2-747U2RIB-6 2-748

UDLD Messages 2-748UDLD-3 2-748UDLD-4 2-749UDLD-5 2-749

UFDM Messages 2-750UFDM-2 2-750

xxviiiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

USBHSD Messages 2-750USBHSD-1 2-750USBHSD-2 2-751USBHSD-3 2-752USBHSD-5 2-752USBHSD-6 2-753USBHSD-7 2-753

USDBA Messages 2-753USDBA-2 2-754USDBA-6 2-754

VAJRA_USD Messages 2-754VAJRA_USD-6 2-754

VAL_USD Messages 2-754VAL_USD-6 2-754

VDC_MGR Messages 2-754VDC_MGR-2 2-755VDC_MGR-3 2-756VDC_MGR-5 2-756

VEC Messages 2-757VEC-SLOT#-3 2-757VEC-SLOT#-4 2-758VEC-SLOT#-5 2-758

VEDB_MGR Messages 2-761VEDB_MGR-2 2-761VEDB_MGR-6 2-761

VES Messages 2-762VES-SLOT#-4 2-762VES-SLOT#-5 2-762

VFC Messages 2-763VFC-3 2-763VFC-6 2-764

VIPER_CMN_USD Messages 2-764VIPER_CMN_USD-6 2-764

VIPER_ICB_USD Messages 2-764VIPER_ICB_USD-2 2-764VIPER_ICB_USD-6 2-764

VIPER_MAC_USD Messages 2-764VIPER_MAC_USD-6 2-765

VIPER_XBAR_USD Messages 2-765VIPER_XBAR_USD-6 2-765

xxixCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

VIP_FWD Messages 2-765VIP_FWD-6 2-765

VIP_ILK Messages 2-765VIP_ILK-6 2-765

VLAN_MGR Messages 2-766VLAN_MGR-2 2-766VLAN_MGR-3 2-766VLAN_MGR-4 2-766VLAN_MGR-5 2-766VLAN_MGR-6 2-767

VMAN Messages 2-767VMAN-2 2-768VMAN-3 2-775VMAN-4 2-775VMAN-5 2-775

VMM Messages 2-776VMM-2 2-776

VNI Messages 2-777VNI-2 2-777VNI-3 2-777VNI-6 2-777

VNTAGC Messages 2-777VNTAGC-5 2-778

VNTAG_MGR Messages 2-778VNTAG_MGR-2 2-778VNTAG_MGR-4 2-779VNTAG_MGR-5 2-779

2-779

VPC Messages 2-779VPC-2 2-780VPC-3 2-782VPC-4 2-784VPC-5 2-786VPC-6 2-789

VPM Messages 2-791VPM-2 2-791VPM-3 2-792VPM-4 2-793VPM-6 2-793VPM-SLOT#-2 2-796

xxxCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

VRRP-CFG Messages 2-796VRRP-CFG-2 2-796VRRP-CFG-3 2-796VRRP-CFG-5 2-797

VRRP-ENG Messages 2-797VRRP-ENG-2 2-797VRRP-ENG-3 2-797VRRP-ENG-4 2-799VRRP-ENG-5 2-799VRRP-ENG-6 2-800

VSAN Messages 2-800VSAN-2 2-800VSAN-3 2-800VSAN-6 2-801

VSC Messages 2-802VSC-SLOT#-2 2-802VSC-SLOT#-3 2-802VSC-SLOT#-5 2-802

VSD Messages 2-803VSD-SLOT#-2 2-803VSD-SLOT#-6 2-803

VSHA Messages 2-803VSHA-3 2-803VSHA-SLOT#-5 2-804

VSHD Messages 2-804VSHD-2 2-804VSHD-3 2-805VSHD-4 2-806VSHD-5 2-806VSHD-7 2-807

VTP Messages 2-807VTP-0 2-807VTP-1 2-807VTP-2 2-807VTP-3 2-808VTP-4 2-809VTP-5 2-810VTP-6 2-810VTP-7 2-811

WWN Messages 2-812

xxxiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

WWN-1 2-812WWN-2 2-812WWN-3 2-814WWN-4 2-815WWN-5 2-815WWN-6 2-816WWN-7 2-817

X2_USD Messages 2-817X2_USD-2 2-818

X2_USD Messages 2-818X2_USD-5 2-818

XBAR_CLIENT Messages 2-819XBAR_CLIENT-2 2-819XBAR_CLIENT-3 2-820XBAR_CLIENT-SLOT#-2 2-821XBAR_CLIENT-SLOT#-3 2-822

XBAR_DRIVER_USD Messages 2-822XBAR_DRIVER_USD-2 2-822XBAR_DRIVER_USD-3 2-823XBAR_DRIVER_USD-5 2-823XBAR_DRIVER_USD-6 2-823

XBAR Messages 2-824XBAR-2 2-824XBAR-3 2-825XBAR-4 2-825XBAR-5 2-826

XCVR_USD Messages 2-830XCVR_USD-6 2-830

XCVR Messages 2-831XCVR-6 2-831

XMLMA Messages 2-831XMLMA-2 2-831XMLMA-3 2-832XMLMA-5 2-832XMLMA-6 2-832

XMLSA Messages 2-832XMLSA-2 2-833XMLSA-5 2-833XMLSA-6 2-833

ZBM Messages 2-834

xxxiiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

ZBM-2 2-834ZBM-4 2-836ZBM-6 2-836

ZONE Messages 2-837ZONE-2 2-838ZONE-3 2-846ZONE-4 2-846ZONE-5 2-849ZONE-6 2-850

xxxiiiCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Contents

xxxivCisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Preface

This document lists and describes the system messages for Cisco NX-OS software. The system software sends these messages to the console (and, optionally, to a logging server on another system) during operation. Not all messages indicate a problem with your system. Some messages are purely informational, while others might help diagnose problems with links, internal hardware, or the system software.

This document includes system messages for all CiscoNX-OS software releases.

This chapter includes the following sections:

• Audience, page 1

• Organization, page 1

• Document Conventions, page 2

• Documentation Feedback, page 2

• Obtaining Documentation and Submitting a Service Request, page 3

AudienceThis guide is for system administrators who are responsible for managing Cisco NX-OS systems.

OrganizationThis guide is organized as follows:

Chapter Title Description

Chapter 1 Introduction to System Messages for Cisco NX-OS

Describes the structure of system messages and the format of system log files.

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 and Nexus 7000 Family

Lists the messages that may appear in log files, and indicates suggested remedies where applicable for the Cisco MDS and Nexus 7000 Family.

-1Cisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02

Document ConventionsCommand descriptions use these conventions:

Screen examples use these conventions:

This document uses the following conventions:

Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.

Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Documentation FeedbackTo provide technical feedback on this document, or to report an error or omission, please send your comments to [email protected]. We appreciate your feedback.

Convention Description

boldface font Commands and keywords are in boldface.

italic font Arguments for which you supply values are in italics.

[ ] Elements in square brackets are optional.

[ x | y | z ] Optional alternative keywords are grouped in brackets and separated by vertical bars.

string A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.

screen font Terminal sessions and information that the switch displays are in screen font.

boldface screen font

Information that you must enter is in boldface screen font.

italic screen font Arguments for which you supply values are in italic screen font.

< > Nonprinting characters, such as passwords, are in angle brackets.

[ ] Default responses to system prompts are in square brackets.

!, # An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line.


OL-29318-02

nexus7k-docfeedback(mailer list) nexus7k-docfeedback(mailer list)

Obtaining Documentation and Submitting a Service RequestFor information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.


OL-29318-02

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html


OL-29318-02

Cisco MDS 9000 Family and NexOL-29318-02, Cisco MDS NX-OS Release 6.x

C H A P T E R 1

Introduction to System Messages for Cisco NX-OS

This chapter describes system messages, as defined by the syslog protocol (RFC 3164). It describes how to understand the syslog message format and how to capture system messages for review.

This chapter contains the following sections:

• System Log Message Format, page 1-1

• Capturing System Messages and History, page 1-5

System Log Message FormatSystem log messages begin with a percent sign (%) and are displayed in the following formats:

• Syslog Format On a Resident Switch, page 1-1

• Syslog Format On a Remote-Logging Server, page 1-3

Syslog Format On a Resident SwitchThe format for a resident syslog is:

month dd hh:mm:ss switchname facility-severity-MNEMONIC descriptionor month dd hh:mm:ss switchname facility-SLOTnumber-severity-MNEMONIC descriptionor month dd hh:mm:ss switchname facility-STANDBY-severity-MNEMONIC description

For example:

Nov 1 14:07:58 excal-113 %MODULE-5-MOD_OK: Module 1 is onlineNov 1 14:07:58 excal-113 %PORT-3-IF_UNSUPPORTED_TRANSCEIVER: Transceiver for interface fc1/13 is not supported.

Table 1-1 System Log Message Format Description

Element Description

month dd The date and month of the error or event

hh:mm:ss The time of the error or event

1-1us 7000 Series NX-OS System Messages Reference

Chapter 1 Introduction to System Messages for Cisco NX-OSSystem Log Message Format

FACILITY is a code consisting of two or more uppercase letters that indicate the facility to which the system message refers. A facility is a hardware device, a protocol, a feature, or a module of the system software.

System message SEVERITY codes range from 0 to 7 and reflect the severity of the condition. The lower the number, the more serious the situation. Table 1-2 lists the severity levels.

MNEMONIC is a code that uniquely identifies the system message.

Message-text is a text string that describes the condition. This portion of the message might contain detailed information about the event, including terminal port numbers, network addresses, or addresses that correspond to locations in the system memory address space. Because the information in these variable fields changes from message to message, it is represented here by short strings enclosed in square brackets ([ ]). A decimal number, for example, is represented as [dec].

Table 1-3 lists the representations of variable fields and the type of information in the fields.

switchname The name of the switch

facility The facility of the error or event (daemon, kernel, VSHD, or other facility)

severity Single-digit code from 0 to 7 that indicates the severity of the message

MNEMONIC Text string that uniquely describes the system message

%$VDC #%$ An optional virtual device context (VDC) ID that appears in the description for messages requiring VDC IDs

%$VRF #%$ An optional virtual routing and forwarding (VRF) ID that appears in the description for messages requiring VRF IDs

description Text string containing detailed information about the event being reported

Table 1-1 System Log Message Format Description (continued)

Element Description

Table 1-2 System Message Severity Levels

Level Description

0 – emergency System unusable

1 – alert Immediate action needed

2 – critical Critical condition

3 – error Error condition

4 – warning Warning condition

5 – notification Normal but significant condition

6 – informational Informational message only

7 – debugging Appears during debugging only

Table 1-3 Representation of Variable Fields in System Messages

Representation Type of Information

[dec] Decimal number

[hex] Hexadecimal number

1-2Cisco MDS 9000 Family and Nexus 7000 Series NX-OS System Messages Reference

OL-29318-02, Cisco MDS NX-OS Release 6.x


The following example system message shows how the variable field might be used:

%MODULE-5-MOD_MINORSWFAIL: Module [dec] reported a failure in service [chars]

In this example,

Facility code =MODULE (indicating that it is a module-specific error)

Severity =5 (notification)

Alarm/event code= MOD_MINORSWFAIL

Description of the problem= Module [dec] reported a failure in service [chars]

[dec] is the module slot number associated with this message.

[chars] is the service name that experienced this failure.

System log messages begin with a percent sign (%) and are displayed in the following format (see Table 1-4).

Syslog Format On a Remote-Logging ServerThe syslog format on a remote-logging server is:

month dd hh:mm:ss IP-addr-switch : year month day hh:mm:ss Timezone: facility-severity-MNEMONIC descriptionor month dd hh:mm:ss IP-addr-switch : year month day hh:mm:ssTimezone: facility-SLOTnumber-severity-MNEMONIC descriptionor month dd hh:mm:ss IP-addr-switch : year month day hh:mm:ss Timezone: facility-STANDBY-severity-MNEMONIC description

For example:

sep 21 11:09:50 172.22.22.45 : 2005 Sep 04 18:18:22 UTC: %AUTHPRIV-3-SYSTEM_MSG: ttyS1:togetattr: Input/output error - getty[28224]switch resident syslog 2005 Sep 4 18:18:22 switch %AUTHPRIV-3-SYSTEM_MSG: ttyS1:togetattr: Input/output error - getty[28224]time on switch : 2005 Sep 4 18:18:22 time on Loggng Server : Sep 21 11:09:50 fc1/13 is not supported.

[char] Single character

[chars] Character string



Table 1-4 System Log Message Format Description

Element Description

month dd The date and month of the error or event

hh:mm:ss The time of the error or event

IP-addr-switch The IP address of the switch

facility The facility of the error or event (daemon, kernel, VSHD, or other facility)

severity Single-digit code from 0 to 3 that indicates the severity of the message

MNEMONIC Text string that uniquely describes the system message




FACILITY is a code consisting of two or more uppercase letters that indicate the facility to which the system message refers. A facility is a hardware device, a protocol, a feature, or a module of the system software.

System message SEVERITY codes range from 0 to 3 and reflect the severity of the condition. The lower the number, the more serious the situation. Table 1-5 lists the severity levels.

MNEMONIC is a code that uniquely identifies the system message.

Message-text is a text string that describes the condition. This portion of the message might contain detailed information about the event, including terminal port numbers, network addresses, or addresses that correspond to locations in the system memory address space. Because the information in these variable fields changes from message to message, it is represented here by short strings enclosed in square brackets ([ ]). A decimal number, for example, is represented as [dec].

Table 1-6 lists the representations of variable fields and the type of information in the fields.

The following example system message shows how the variable field might be used:

%AUTHPRIV-3-SYSTEM_MSG: AUTHPRIV [dec] reported a failure in service [chars]

In this example,

Facility code =AUTHPRIV (indicating that it is a authpriv-specific error)

Severity =3 (notification)

%$VDC #%$ An optional virtual device context (VDC) ID that appears in the description for messages requiring VDC IDs

%$VRF #%$ An optional virtual routing and forwarding (VRF) ID that appears in the description for messages requiring VRF IDs

description Text string containing detailed information about the event being reported

Table 1-4 System Log Message Format Description (continued)

Element Description

Table 1-5 System Log Message Format description

Level Description

0 – emergency System unusable

1 – alert Immediate action needed

2 – critical Critical condition

3 – notification Normal but significant condition



[dec] Decimal number

[hex] Hexadecimal number

[char] Single character

[chars] Character string



Chapter 1 Introduction to System Messages for Cisco NX-OSCapturing System Messages and History

Alarm/event code= SYSTEM_MSG

Description of the problem= Authpriv [dec] reported a failure in service [chars]

[dec] is the module slot number associated with this message.

[chars] is the service name that experienced this failure.

Capturing System Messages and HistoryThe system messages are displayed instantly on the console, by default, or are redirected to an internal log file, or a syslog server. System message severity levels correspond to the keywords assigned by the logging global configuration commands. These keywords define where and at what level these messages appear (see to the Cisco NX-OS System Management Configuration Guide). Only system messages that correspond to the configured logging level or higher severity messages are logged. As an example, if you set the logging level to 3 (error), then you get error, critical, alerts, and emergency system messages, but you do not get warning, notification, informational, or debugging system messages.

For complete information about handling system messages, see the Cisco NX-OS System Management Configuration Guide, Release 4.1.

Saving the System Messages LogThe logging logfile global configuration command enables copying of system messages to an internal log file and optionally sets the size of the file. To display the messages that are logged in the file, use the show logging EXEC command. The first message displayed is the oldest message in the buffer. To clear the current contents of the buffer, use the clear debug-logfile command.

Logging System Messages to a Syslog ServerThe logging host-name command identifies a syslog server host to receive logging messages. The host-name argument is the name or Internet address of the host. By issuing this command more than once, you build a list of syslog servers that receive logging messages. The no logging host-name command deletes the syslog server with the specified address from the list of syslog servers.



Chapter 1 Introduction to System Messages for Cisco NX-OSCapturing System Messages and History



Cisco MDS 9000 Family and NexOL-29318-02, Cisco MDS NX-OS Release 6.x

C H A P T E R 2

System Messages and Recovery Procedures for the Cisco MDS 9000 and Nexus 7000 Family

This chapter includes system messages for the Cisco NX-OS MDS 9000 and Nexus 7000 families of switches. The messages are listed in alphabetical order by the system facility that produces them. Within each system facility section, messages are listed alphabetically by severity and mnemonics. Each error message is followed by an explanation and a recommended action.

AAA MessagesThis section contains the AAA messages.

AAA-1

Error Message AAA-1-AAA_SESSION_LIMIT_REJECT: aaa request rejected as maximum aaa sessions are in progress

Explanation Aaa request rejected as the limit for maximum concurrent aaa sessions is reached

Recommended Action Please contact the Cisco reseller through which you procured the product for support. If you have purchased a Cisco support contract please call Cisco TAC for support.

AAA-2

Error Message AAA-2-AAA_NVRAM_UPGRADE_FAILURE: upgrading of accounting log failed. [chars]

Explanation Upgrading of accounting log failed.


2-1us 7000 Series NX-OS System Messages Reference


Error Message AAA-2-AAA_PROGRAM_EXIT: aaa daemon exiting: [chars]

Explanation Aaa daemon is exiting.


AAA-3

Error Message AAA-3-AAA_ERR_MSG: [chars]

Explanation AAA Error Message

Recommended Action No action is required.

Error Message AAA-3-AAA_NVRAMFAILURE: nvram failure

Explanation Nvram can not be read/written to. Hence accounting log can not be stored there


AAA-6

Error Message AAA-6-AAA_ACCOUNTING_MESSAGE: [chars]

Explanation Accounting Message


AAA-7

Error Message AAA-7-AAA_DBG_MSG: [chars]

Explanation AAA Debug Message


AAM MessagesThis section contains the AAM messages.




AAM-2

Error Message AAM-2-ELS_FC2_GL_SINDEX_LOOKUP_FAILED: Failed to lookup global port index for interface [[chars]]

Explanation Failed to lookup global port index for interface [chars]


AAM-3

Error Message AAM-3-ALLOC_FAILED: Failed in File:[chars] Line:[dec] for type [dec] size [dec]

Explanation AAM process could not allocate heap memory in File:[chars], at line:[dec], for memory-type:[dec] of Size:[dec]


Error Message AAM-3-ASSERTION_FAILED: Failed in File:[chars] Line:[dec]

Explanation AAM Process assertion failed in File:[chars], at line:[dec]


ACLLOG MessagesThis section contains the ACLLOG messages.

ACLLOG-4

Error Message ACLLOG-4-ACLLOG_MAXFLOW_REACHED: [chars]

Explanation Max flow reached in current interval: [chars]


Error Message ACLLOG-4-ACLLOG_THRESHOLD: [chars]

Explanation Threshold Reached for Flow: [chars]





ACLLOG-6

Error Message ACLLOG-6-ACLLOG_FLOW_INTERVAL: [chars]

Explanation Flow info in current alert interval: [chars]


Error Message ACLLOG-6-ACLLOG_NEW_FLOW: [chars]

Explanation New Acllog Flow: [chars]


ACLMGR MessagesThis section contains the ACLMGR messages.

ACLMGR-2

Error Message ACLMGR-2-ACLMGR_COMMIT_FAIL: Commit failed: [chars]

Explanation The PPF commit failed


Error Message ACLMGR-2-ACLMGR_NO_ERRDISABLED: [chars] event on interface [chars] ([hex]) allowed to succeed in spite of access-list failure

Explanation Although an access-list operation failed during a port event, the port event still finished successfully because errdisable is disallowed


Error Message ACLMGR-2-EXITING: Exit reason: [chars]

Explanation The ACLMGR service process has exited due to [char]. The process has probably been restarted automatically.


Error Message ACLMGR-2-INITFAIL: ACLMGR Service Init failed: [chars]

Explanation ACLMGR Service initialization failed. [chars] explains the reason for the failure.





Error Message ACLMGR-2-MALLOC_ERROR: Size [dec] bytes

Explanation The ACLMGR service could not allocate memory.


Error Message ACLMGR-2-PSS_ERROR: [chars]: PSS ret. val=[dec]

Explanation The ACLMGR service encountered error while operating on a persistent storage database.


ACLMGR-3

Error Message ACLMGR-3-ACLMGR_DB_LOCK_MSG: ACL database message, reason: [chars], session 0x%llx, type: [chars]

Explanation ACL PPF database lock acquire/release related message.


Error Message ACLMGR-3-ACLMGR_GSYNC_ERROR: Error occured during global sync of ACL runtime database to standby, reason: [chars] , [chars]

Explanation ACL snapshot to send the copy of runtime database to standby failed


Error Message ACLMGR-3-ACLMGR_PPF_ERROR: PPF error: [chars]

Explanation The PPF generated error


Error Message ACLMGR-3-ACLMGR_PSS_CORRUPTED: [chars] PSS found corrupted

Explanation The ACLMGR service has detected corruption in one of its persistent information database. The database would be recreated.





Error Message ACLMGR-3-ACLMGR_STAT_CONSOLIDATION_FAILURE: ACL statistic parsing or consolidation failed

Explanation A statistic update failed during the parsing or consolidation step; statistics may have been lost


Error Message ACLMGR-3-ACLMGR_VACL_REDIRECTION_DISABLED_REMOVAL: VACL redirection to interface [chars] ([hex]) disabled: the port has been removed

Explanation A VACL redirection to the port has been deactivated because the port has been removed


Error Message ACLMGR-3-ACLMGR_VERIFY_FAIL: Verify failed: [chars]

Explanation The PPF Verify failed


Error Message ACLMGR-3-ACLMGR_COMMIT_FAIL: Commit failed: [chars]

Explanation The PPF commit failed


Error Message ACLMGR-3-MTSERROR: [chars]

Explanation ACLMGR Service encountered an MTS error. [chars] specifies the context where the error occured.


ACLMGR-4

Error Message ACLMGR-4-ACLMGR_PPF_WARNING: PPF warning: [chars]

Explanation The PPF generated warning


Error Message ACLMGR-4-ACLMGR_VACL_REDIRECTION_DISABLED_PCM: VACL redirection to interface [chars] ([hex]) disabled: the port became a portchannel member

Explanation A VACL redirection to the port has been temporarily deactivated because it is now a member in a port channel





Error Message ACLMGR-4-PSS_VERSION_MISMATCH: PSS [dec] Code [dec]

Explanation There was a version mismatch between the ACLMGR service and one of its persistent storage databases. The persistent information has been translated to the new format.


ACLMGR-6

Error Message ACLMGR-6-ACLMGR_PPF_NOTIF: PPF notification: [chars]

Explanation The PPF generated notification


Error Message ACLMGR-6-BECAME_ACTIVE: Became ACTIVE from standby mode

Explanation The ACLMGR service on the standby supervisor became active and it is ready to serve client requests.


Error Message ACLMGR-6-BECAME_STDBY: Became STANDBY from active mode

Explanation The ACLMGR service became standby from active mode.


Error Message ACLMGR-6-FAILED_TO_SEND_HEARTBEAT: Failed to send heartbeat to system manager: Reason=[chars]

Explanation The ACLMGR service was unable to send heartbeat to the system manger


Error Message ACLMGR-6-SERVICE_UP: Initialized [chars]

Explanation The ACLMGR service is up and ready The service was initialized in [char] mode.


Error Message ACLMGR-6-SRVEXIT: ACLMGR Service shutting down gracefully

Explanation ACLMGR Service is shutting down gracefully. This is an informational message.





Error Message ACLMGR-6-SWITCHOVER: Switching Over to other Sup.

Explanation The ACLMGR service has successfully switched over to the standby supervisor card.


ACLQOS MessagesThis section contains the ACLQOS messages.

ACLQOS-SLOT#-2

Error Message ACLQOS-SLOT#-2-ACLQOS_FAILED: ACLQOS failure: [chars]

Explanation ACLQOS operation failed in the aclqos client

Recommended Action No DDTS.

Error Message ACLQOS-SLOT#-2-ACLQOS_INBAND_INTERFACE_FAILURE: Inband interface lif lookup failed ([chars])

Explanation Inband interface lif lookup failed


Error Message ACLQOS-SLOT#-2-ACLQOS_MALLOC_FAILED: Memory allocation failed. [chars]

Explanation Memory allocation failed. This is a critical failure


Error Message ACLQOS-SLOT#-2-ACLQOS_OOTR: Tcam resource exhausted: [chars]

Explanation Tcam resources to program acls exhausted


Error Message ACLQOS-SLOT#-2-PPF_FAILED: Database failure: [chars]

Explanation Database operation failed in the aclqos client





ACLQOS-SLOT#-3

Error Message ACLQOS-SLOT#-3-ACLQOS_CC_INVALID: Invalid Congestion Control parameters: [chars]

Explanation Invalid Congestion Control parameters


Error Message ACLQOS-SLOT#-3-ACLQOS_MCM_ERROR: MCM Message Inconsistent. Please collect MCM and ACLMgr Tech Support for all VDCs

Explanation MCM Message Inconsistent


Error Message ACLQOS-SLOT#-3-ACLQOS_PAUSE_INVALID: Invalid Pause parameters: [chars]

Explanation Invalid Pause parameters


Error Message ACLQOS-SLOT#-3-ACLQOS_QUEUING_ERROR: ACL/QoS queuing error: [chars]

Explanation Internal error in ACL/QoS queuing config


ACLQOS-SLOT#-4

Error Message ACLQOS-SLOT#-4-ACLQOS_ATOMIC_ERR: [chars]

Explanation Tcam will be overused, please turn off atomic update


Error Message ACLQOS-SLOT#-4-ACLQOS_BC_OVER_THRESHOLD: Bank Chaining enabled: Inst [dec]susagehasreacheditsthreshold'

Explanation Tcam is almost full





Error Message ACLQOS-SLOT#-4-ACLQOS_FC_WARNING: Found stale FCoE entry in instance [dec]. VSAN: [dec], SID: [hex], DID: [hex], SI:[dec], SI_MASK:[dec], RW_VSAN: [dec], RW_VSAN_FLAG: [dec], RW_SID: [hex], RW_SID_FLAG: [dec], RW_DID: [hex]. RW_DID_FLAG: [dec] Cleaning it up.

Explanation Found stale FCoE entry in instance [dec]. VSAN: [dec], SID: 0x[hex], DID: 0x[hex], SI:[dec], SI_MASK:[dec], RW_VSAN:[dec], RW_VSAN_FLAG: [dec], RW_SID: 0x[hex], RW_SID_FLAG:[dec], RW_DID: 0x[hex]. RW_DID_FLAG: [dec] Cleaning it up.


Error Message ACLQOS-SLOT#-4-ACLQOS_MATCH_ALL_MERGE_UPDATE: Warning (match_all merging): [chars]

Explanation Warning (match_all merging)


Error Message ACLQOS-SLOT#-4-ACLQOS_OVER_THRESHOLD: Inst [dec] Tcam [dec] Bank [dec]susagehasreacheditsthreshold'

Explanation Tcam is almost full


Error Message ACLQOS-SLOT#-4-ACLQOS_QUEUING_COS2Q_INVALID: ACL/QoS invalid queuing policy because of cos map change: [chars] queue [chars], interface [chars]

Explanation Attemped to configure an invalid queuing policy


Error Message ACLQOS-SLOT#-4-ACLQOS_QUEUING_INVALID: ACL/QoS invalid queuing policy: [chars]

Explanation Attemped to configure an invalid queuing policy


Error Message ACLQOS-SLOT#-4-ACLQOS_UNDER_THRESHOLD: Tcam [dec] Bank [dec]'s usage is below the threshold now

Explanation Tcam's usage is below the threshold





Error Message ACLQOS-SLOT#-4-ACLQOS_WARNING: ACLQOS Warning: [chars]

Explanation ACLQOS Warnings


ACLQOS-SLOT#-5

Error Message ACLQOS-SLOT#-5-ACLQOS_DISRUPTIVE_IPv6_UPDATE: Disruptive update of IPv6 compression entries

Explanation Disruptive IPv6 compression entries update


Error Message ACLQOS-SLOT#-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy update done for [chars]

Explanation Non atomic ACL/QoS policy update was done


ACLTCAM MessagesThis section contains the ACLTCAM messages.

ACLTCAM-2

Error Message ACLTCAM-2-ACL_TCAM_ADJ_EXHAUSTED: ACLTCAM failed to program route for VSAN: [dec], SID: [chars] DID: [chars], error: [chars].

Explanation ACLTCAM process experienced a failure while programming route for VSAN [dec] SID [chars] DID [chars] due to resource exhaustion. [chars] is the error code.


Error Message ACLTCAM-2-ACL_TCAM_ALMOST_FULL: TCAM close to FULL. [chars] TCAM Usage ([dec]/[dec]) exceeded [dec]% fwd-eng: [dec], [chars]

Explanation [chars] TCAM usage [dec]/[dec] exceeded [dec] percent on fwd-engine [dec], [chars]





Error Message ACLTCAM-2-ACL_TCAM_CONFIG_READ_FROM_DRIVER_FAILED: [chars] [dec], Error: [hex].

Explanation Unable to read configuration from forwarding engine ASIC driver. [chars] [dec], Error: 0x[hex].


Error Message ACLTCAM-2-ACL_TCAM_CONFIG_WRITE_TO_DRIVER_FAILED: [chars] [dec], Error: [hex].

Explanation Unable to write configuration to forwarding engine ASIC driver. [chars] [dec], Error: 0x[hex].


Error Message ACLTCAM-2-ACL_TCAM_FLOW_STATS_READ_FAILED: Hardware flow stats read failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec], Error: [chars]).

Explanation Hardware flow stats read failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec] Error: [chars]).


Error Message ACLTCAM-2-ACL_TCAM_INCONSISTENT_DATABASE: Database found inconsistent.

Explanation Database found inconsistent.


Error Message ACLTCAM-2-ACL_TCAM_INCONSISTENT_TCAM_CONTENTS: TCAM contents found inconsistent.

Explanation TCAM contents are found inconsistent.


Error Message ACLTCAM-2-ACL_TCAM_INIT_FAILED: Initialization failed for forwarding engine ASIC: [dec], [chars] TCAM.

Explanation Initialization failed for forwarding engine ASIC [dec], in [chars] TCAM.





Error Message ACLTCAM-2-ACL_TCAM_INIT_REGIONS_FAILED: Initialization failed for forwarding engine ASIC: [dec], [chars] TCAM, [chars] Region.

Explanation Initialization of regions failed for forwarding engine ASIC [dec], in [chars] TCAM, for [chars] Region.


Error Message ACLTCAM-2-ACL_TCAM_MALLOC_FAILURE: Memory allocation failed for size [dec].

Explanation Memory allocation is failed for size [dec] bytes.

Recommended Action Restart the process.

Error Message ACLTCAM-2-ACL_TCAM_MTS_FAILURE: MTS operation failed: [chars].

Explanation MTS operation failed. [chars] is the reason.


Error Message ACLTCAM-2-ACL_TCAM_MTS_Q_FULL: MTS queue for SAP [dec] is full

Explanation MTS queue for SAP [dec] is full


Error Message ACLTCAM-2-ACL_TCAM_MTS_REGISTRATION_FAILED: MTS registration failed for opCode: [dec].

Explanation MTS registration failed for opCode: [dec].


Error Message ACLTCAM-2-ACL_TCAM_NO_ROUTE: ACLTCAM failed to get route for VSAN: [dec], Rewrite: [chars] DID: [chars] DID MASK: [chars], error: [hex].

Explanation ACLTCAM process experienced a failure while getting route for VSAN [dec] Rewrite [chars] DID [chars] DID Mask [chars]. [hex] is the error code.


Error Message ACLTCAM-2-ACL_TCAM_NO_TCAM_LEFT: ACLTCAM resource exhausted for interface : [chars]

Explanation ACLTCAM hardware resource is completely used.





Error Message ACLTCAM-2-ACL_TCAM_PHY_TCAM_READ_FAILED: [chars] read from hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec], Error: [chars]).

Explanation [chars] read from hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec] Error: [chars]).


Error Message ACLTCAM-2-ACL_TCAM_PHY_TCAM_READ_INVALID: Invalid([chars], value: [dec]) TCAM entry read from hardware TCAM (FWD-Engine: [dec], [chars] TCAM, Address: [dec]), Ignoring this entry.

Explanation Invalid([chars], value: [dec]) TCAM entry from hardware TCAM(FWD-Engine: [dec], [chars] TCAM, Address: [dec]) Ignoring this entry


Error Message ACLTCAM-2-ACL_TCAM_PHY_TCAM_WRITE_FAILED: [chars] write to hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec], Error: [chars]).

Explanation [chars] write to hardware TCAM failed(ASIC: [dec], [chars] TCAM, Address: [dec], Num Entries: [dec] Error: [chars]).


Error Message ACLTCAM-2-ACL_TCAM_PSS_FAILURE: Failed to do PSS operation: [chars], reason: [hex].

Explanation Failed to do PSS operation [chars]. [hex] is the reason.


Error Message ACLTCAM-2-PSS_OPEN_FAILED: PSS open failed - [hex].

Explanation Persistent database handle could not obtained for ACLTCAM. [hex] is the error.


Error Message ACLTCAM-2-RECONS_FAILED: Reconstruction of TCAM contents failed during upgrade - [hex].

Explanation During non-disruptive upgrade, the ACLTCAM contents are not properly reconstructed. [hex] is the error.





ACLTCAM-3

Error Message ACLTCAM-3-ACL_TCAM_INV_TCAM_SYNC_ATTEMPT: Attempt to write invalid shadow entry: [dec] ([dec]/[dec]) to TCAM, fwd-engine: [dec] ([chars]), change-array: [dec]/[dec],


Error Message ACLTCAM-3-PSSERROR: [chars]

Explanation TL Port Manager encountered a PSS error. [chars] specifies the context where the failure occured.


Error Message ACLTCAM-3-REGISTER_FAILED: Could not register to MTS opcode [chars] - error [hex].

Explanation ACLTCAM process could not register to the notifications mentioned by [chars]. [hex] is the error.


ACLTCAM-4

Error Message ACLTCAM-4-ACL_TCAM_BELOW_THRESHOLD: [chars] TCAM usage ([dec]/[dec]) fell below [dec]% fwd-eng: [dec], [chars]

Explanation [chars] TCAM usage [dec]/[dec] fell below [dec] percent on fwd-engine [dec], [chars]


Error Message ACLTCAM-4-ACL_TCAM_BEYOND_THRESHOLD: [chars] TCAM usage ([dec]/[dec]) exceeded [dec]% fwd-eng: [dec], [chars]

Explanation [chars] TCAM usage [dec]/[dec] exceeded [dec] percent on fwd-engine [dec], [chars]


Error Message ACLTCAM-4-ACL_TCAM_FLOW_COUNTER_INVALIDATED: Flow counter for flow: vsan: [dec], sid: [hex], did: [hex] with statistics: frames = %llu & bytes = %llu was invalidated due to: [chars]

Explanation ACLTCAM process invalidated the flow counter for flow VSAN [dec] SID [hex] DID [hex] with collected stats of [dec] frames and [dev] bytes was invalidated because of reason [[chars]].


Error Message ACLTCAM-4-ACL_TCAM_FLOW_COUNTER_VALIDATED: Flow counter for flow: vsan: [dec], sid: [hex], did: [hex] is now valid

Explanation ACLTCAM process validated the flow counter for flow VSAN [dec] SID [hex] DID [hex].





Error Message ACLTCAM-4-ACL_TCAM_MTS_Q_HIGH: MTS queue for SAP [dec] is close to full

Explanation MTS queue for SAP [dec] is close to full


Error Message ACLTCAM-4-TLPM_ALPA_CACHE_FULL: Translation Port ALPA cache is full. Some new entries may not be cached

Explanation TL Port cache is currently fully populated with active entries. Hence, there is no available cache space to be assigned any newly created alpa entry on a TL Port. This is an informational message.


ACLTCAM-6

Error Message ACLTCAM-6-ACL_TCAM_STATUS: Status: [chars].

Explanation ACLTCAM status is reported as: [chars].


Error Message ACLTCAM-6-MGRCREATED: Translation Port Manager created.

Explanation TL Port Manager was created successfully and is up and running. This is an informational message.


Error Message ACLTCAM-6-MGREXIT: Translation Port Manager shutting down gracefully.

Explanation TL Port Manager is shutting down gracefully. This is an informational message.


Error Message ACLTCAM-6-PORTDOWN: Translation Port [chars] DOWN.

Explanation A port configured as TL Port is DOWN and out of operation. [chars] is the interface-id string that identifies the TL Port. This is an informational message.


Error Message ACLTCAM-6-PORTUP: Translation Port [chars] UP.

Explanation A port configured as TL Port is UP and operational. [chars] is the interface-id string that identifies the TL Port. This is an informational message.





ACL MessagesThis section contains the ACL messages.

ACL-2

Error Message ACL-2-ACL_HA_FAILURE: Failed to do high availability operation: [chars].

Explanation Failed to do high availability operation. [chars] is the reason.


Error Message ACL-2-ACL_INIT_FAILED: Initialization failed for ACL: [chars], reason: [hex].

Explanation Initialization failed for ACL due to [chars], reason: [hex].


Error Message ACL-2-ACL_LINECARD_STATUS: Status from linecard: [dec], for module: [chars](ID: [dec]), status : [dec], error_id: [hex], catastrophic: [chars], restart count: [dec].

Explanation Status from linecard: [dec], for module: [chars](ID: [dec]), status : [dec], error_id: [hex], catastrophic: [chars], restart count: [dec].


Error Message ACL-2-ACL_MTS_FAILURE: Failed to do MTS operation: [chars].

Explanation Failed to do MTS operation. [chars] is the reason.


Error Message ACL-2-ACL_MTS_Q_FULL: MTS queue for SAP [dec] is full

Explanation MTS queue for SAP [dec] is full


Error Message ACL-2-ACL_MTS_REGISTRATION_FAILED: MTS options setting to [hex] failed for opCode: [dec].

Explanation MTS options setting to [hex] failed for opCode: [dec].





Error Message ACL-2-ACL_PENDING_MSG_ARR_FULL: ACL Upgrade Pending Messages Array is Full with [dec] messages. Failing the MTS message with Opc: [dec], RR_TOKEN: [hex]

Explanation ACL Upgrade Pending Messages Array is Full with [dec] messages. Failing the MTS message with Opc: [dec], RR_TOKEN: [hex]


Error Message ACL-2-ACL_PSS_FAILURE: Failed to do PSS operation: [chars], reason: [hex].

Explanation Failed to do PSS operation [chars]. [hex] is the reason.


Error Message ACL-2-ACL_PSS_VER_FAIL: PSS file [chars] has version [dec].[dec].[dec], expected version [dec].[dec].[dec].

Explanation There was a mismatch in the PSS version. [chars] indicates the PSS service, [dec].[dec].[dec] its current version number and [dec].[dec].[dec] the expected version.


Error Message ACL-2-ACL_RUNTIME_FAILURE: [chars] [dec], Error: [hex]

Explanation ACL runtime failure is reported as [chars] [dec], reason: [hex].


Error Message ACL-2-ACL_TCAM_FAILURE: Failed to do TCAM operation: [chars].

Explanation Failed to do TCAM operation. [chars] is the reason.


ACL-3

Error Message ACL-3-ACL_MTS_Q_LEAK: Possible MTS buffer leak for SAP [dec]

Explanation Possible MTS buffer leak for SAP [dec]





ACL-4

Error Message ACL-4-ACL_MTS_Q_HIGH: MTS queue for SAP [dec] is close to full

Explanation MTS queue for SAP [dec] is close to full


Error Message ACL-4-ACL_WARNING: [chars] [dec]

Explanation ACL warning messages is reported as [chars] [dec].


ACL-5

Error Message ACL-5-ACL_ADJ_SHARING_STATUS: Successfully completed [chars] on Generation 2 linecards.

Explanation Successfully completed the command \[chars]\ on Generation 2 linecards.


ACL-6

Error Message ACL-6-ACL_DIAG_EVENT_STATUS: [chars] [hex].

Explanation ACL system health management event status is reported as [chars] [hex].


Error Message ACL-6-ACL_E_PORT_EVENT_STATUS: [chars] [chars].

Explanation ACL xEport event status is reported as [chars] [chars].


Error Message ACL-6-ACL_FCC_EVENT_STATUS: [chars] [chars].

Explanation ACL FCC event status is reported as [chars] [chars].





Error Message ACL-6-ACL_LINECARD_EVENT_STATUS: [chars] [hex].

Explanation ACL linecard event status is reported as [chars] [dec].


Error Message ACL-6-ACL_MCAST_EVENT_STATUS: [chars] [chars].

Explanation ACL multicast event status is reported as [chars] [chars].


Error Message ACL-6-ACL_NX_PORT_EVENT_STATUS: [chars] [chars].

Explanation ACL Nx Port event status is reported as [chars] [chars].


Error Message ACL-6-ACL_PORT_MODE_EVENT_STATUS: [chars] [chars].

Explanation ACL portmode event status is reported as [chars] [chars].


Error Message ACL-6-ACL_RUNTIME_STATUS: [chars] [dec]

Explanation ACL runtime status is reported as [chars] [dec].


Error Message ACL-6-ACL_SPAN_DEST_CONFIG_STATUS: [chars] [chars].

Explanation ACL SPAN destination config event status is reported as [chars] [chars].


Error Message ACL-6-ACL_SPAN_SRC_CONFIG_STATUS: [chars] [chars].

Explanation ACL SPAN source config event status is reported as [chars] [chars].


Error Message ACL-6-ACL_STATUS: ACL Status: [chars].

Explanation ACL status is reported as [chars].





Error Message ACL-6-ACL_UPDATE_SSRAM_QOS_EVENT_STATUS: [chars] [chars].

Explanation ACL update SSRAM for QoS event status is reported as [chars] [chars].


AGNI-DPP MessagesThis section contains the AGNI-DPP messages.

AGNI-DPP-2

Error Message AGNI-DPP-2-AGNI_DPP_PRINT_2HEX: [chars] [hex] [hex]

Explanation Print a string and 1 value


Error Message AGNI-DPP-2-AGNI_DPP_PRINT_HEX: [chars] [hex]



Error Message AGNI-DPP-2-AGNI_DPP_PRINT_INT: [chars] [dec]



Error Message AGNI-DPP-2-AGNI_DPP_PRINT_STR: [chars] [chars]



Error Message AGNI-DPP-2-AGNI_DPP_PRINT: [chars]

Explanation Print a string





AGNI-DPP-6

Error Message AGNI-DPP-6-AGNI_DPP_DEBUG_MSG: [chars]

Explanation Debug log message


AGNIL2F MessagesThis section contains the AGNIL2F messages.

AGNIL2F-6

Error Message AGNIL2F-6-AGNIL2F_DEBUG_MSG: [chars]

Explanation Debug log message


ALI_LC MessagesThis section contains the ALI_LC messages.

ALI_LC-2

Error Message ALI_LC-2-INIT_FAIL: [chars]

Explanation Initialization failed


Error Message ALI_LC-2-INTERNAL_PORT_FAILURE: Internal port [dec] reinit failed due to [chars]

Explanation An Internal port number [dec] on the board has failed due to reason [chars]. The corresponding ethernet port may become unusable





Error Message ALI_LC-2-INTERNAL_PORT_REINIT: Internal port [dec] has been reinitialized due to [chars]

Explanation An Internal port number [dec] on the board was reinitialized due to reason [chars]. The corresponding ethernet port may experience some packet drops


Error Message ALI_LC-2-MTS_FAILURE: [chars]

Explanation MTS send/receive failed


AMM MessagesThis section contains the AMM messages.

AMM-SLOT#-0

Error Message AMM-SLOT#-0-CLI_INIT_FAILED: CLI library initialization failed!

Explanation AMM failed to initialize CLI infrastructure\sbackendlibrary.Thisisafatalerror.'


Error Message AMM-SLOT#-0-TIMER_INIT_FAILED: Timer subsystem initialization failed!

Explanation AMM failed to initialize timer library. This is a fatal error.


AMM-SLOT#-2

Error Message AMM-SLOT#-2-AMM_MEM_ALLOC: Memory allocation failed. [chars]

Explanation Memory allocation failed. This is a critical failure


Error Message AMM-SLOT#-2-AMM_RECOVERY_ERROR: Error in Recovery: [chars]

Explanation AMM failed to recover after a re-start. This is a fatal error.





AMM-SLOT#-6

Error Message AMM-SLOT#-6-INITIALIZED: Internal state created [chars]

Explanation AMM has created its internal state stateless/stateful [chars].


APP EMULATOR MessagesThis section contains the APP EMULATOR messages.

APP EMULATOR-SLOT#-5

Error Message APP EMULATOR-SLOT#-5-LOG_ERR_EMULATOR_DPP_DEAD: VSAN :[dec] VT pWWN :[chars] DPP died

Explanation The DPP associated with the Virtual Target has crashed


Error Message APP EMULATOR-SLOT#-5-LOG_ERR_EMULATOR_VT_ACT_FAILED: VSAN :[dec] VT pWWN :[chars] VT Activate failed

Explanation The activate step for a Virtual Target has failed


Error Message APP EMULATOR-SLOT#-5-LOG_ERR_EMULATOR_VT_CREATE_FAIL: VSAN :[dec] VT pWWN :[chars] VT and NPort creation FAILED !!!

Explanation The Virtual Target and nport creation failed


Error Message APP EMULATOR-SLOT#-5-LOG_ERR_EMULATOR_VT_DESTROYED: VSAN :[dec] Virtual Target : [chars] Deleted

Explanation The Virtual Target in the associated VSAN is being destroyed





Error Message APP EMULATOR-SLOT#-5-LOG_ERR_EMULATOR_VT_VSAN_DOWN: VSAN :[dec] VT pWWN :[chars] VSAN down

Explanation The VSAN where the Virtual Target is configured is down


ARBITER MessagesThis section contains the ARBITER messages.

ARBITER-2

Error Message ARBITER-2-CATASTROPHIC_FAILURE: Arbiter Catastrophic interrupt:[chars]

Explanation Arbiter trigerred Catastrophic error interrupt

Recommended Action Please contact your support representative

Error Message ARBITER-2-MBIST_FAIL: Arbiter MBIST failed:[chars]

Explanation Arbiter failed built in self test

Recommended Action Please contact your support representative

ASCII-CFG MessagesThis section contains the ASCII-CFG messages.

ASCII-CFG-2

Error Message ASCII-CFG-2-ACFG_CONFIGURATION_APPLY_ERROR: Error encountered while Ascii configuration was being applied. Please

cisco mds 9000 family and nexus 7000 series nx …...i cisco mds 9000 family and nexus 7000 series...

Documents