cisco cert network associate networking routing 1 quiz answers

39
NETWORKING QUIZ 1 Grading Summary These are the automatically computed results of your exam. Grades for essay questions, and comments from your instructor, are in the "Details" section below. Date Taken: 4/20/2013 Time Spent: 46 min , 58 secs Points Received: 14 / 20 (70%) Question Type: # Of Questions: # Correct: Multiple Choice 10 7 Grade Details - All Questions 1. Question : Which of the following are associated with the application layer of the OSI model? Student Answer: ping Telnet FTP TCP IP Points Received: 0 of 2 Comments: 2. Question : A receiving host has failed to receive all of the segments that it should acknowledge. What can the host do to improve the reliability of this communication session? Student Answer: send a different source port number restart the virtual circuit decrease sequence number decrease the window size -2037580357 MultipleChoice 1 False 0 -2037580357 MultipleChoice 1

Upload: el-lobo-proscrito

Post on 30-Nov-2015

192 views

Category:

Documents


2 download

DESCRIPTION

a compiled paper of 12 quiz's for Cisco Cert Network Associate answers

TRANSCRIPT

Page 1: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

NETWORKING QUIZ 1

Grading Summary

These are the automatically computed results of your exam. Grades for essay questions, and comments from your instructor, are in the "Details" section below.

Date Taken: 4/20/2013Time Spent: 46 min , 58 secs Points Received: 14 / 20 (70%)

Question Type: # Of Questions: # Correct:

Multiple Choice 10 7

Grade Details - All Questions

1. Question : Which of the following are associated with the application layer of the OSI model?

Student Answer:ping

Telnet

FTP

TCP

IP

Points Received: 0 of 2

Comments:

2. Question : A receiving host has failed to receive all of the segments that it should acknowledge. What can the host do to improve the reliability of this communication session?

Student Answer:send a different source port number

restart the virtual circuit

decrease sequence number

decrease the window size

Points Received: 2 of 2

Comments:

-2037580357 MultipleChoice 1 False

0 -2037580357 MultipleChoice 1

-2037580356 MultipleChoice 13 True

Page 2: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

3. Question : Segmentation and reassembly of data from the upper-layer applications occurs at what layer?

Student Answer:The Application layer

The Presentation layer

The Session layer

The Transport layer

Points Received: 2 of 2

Comments:

4. Question : A host receives a frame and computes the checksum, and determines that the frame is damaged. The frame is discarded. At what layer of the OSI model did this happen?

Student Answer:Transport

Network

Data link

Physical

Points Received: 2 of 2

Comments:

5. Question : Routers operate at layer __. LAN switches operate at layer __. Ethernet hubs operate at layer __. Word processing operates at layer __.

Student Answer:3,3,17

3,2,1, none

3,2,1,7

2,3,1,7

3,3,2,none

0 -2037580356 MultipleChoice 13

-2037580355 MultipleChoice 3 True

0 -2037580355 MultipleChoice 3

-2037580354 MultipleChoice 2 True

0 -2037580354 MultipleChoice 2

Page 3: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Points Received: 2 of 2

Comments:

6. Question : Which layer of the OSI model is responsible for creating packets?

Student Answer:Data Link

Network

Transport

Session

Points Received: 0 of 2

Comments:

7. Question : Segmentation of a data stream happens at which layer of the OSI model?

Student Answer:Physical

Data Link

Network

Transport

Points Received: 2 of 2

Comments:

8. Question : When data is encapsulated, which is the correct order?

Student Answer:data, frame, packet, segment, bit

segments, it, packet, frame, bit

data, segment, packet, frame, bit

data, segment, frame, packet, bit

-2037580353 MultipleChoice 11 True

0 -2037580353 MultipleChoice 11

-2037580352 MultipleChoice 5 False

0 -2037580352 MultipleChoice 5

-2037580351 MultipleChoice 10 True

0 -2037580351 MultipleChoice 10

Page 4: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Points Received: 2 of 2

Comments:

9. Question : If a hub has three computers connected to it, how many broadcast and collision domains is the hub creating?

Student Answer:three broadcast and one collision

three broadcast and three collision

one broadcast and three collision

one broadcast and one collision

Points Received: 0 of 2

Comments:

10. Question : What is the purpose of flow control?

Student Answer:To ensure that data is retransmitted if an acknowledgment is not

received

to re-assemble segments in the correct order at the destination device

two provide a means for the receiver to govern be amounts of data sent by the sender

two regulate the size of each segment

Points Received: 2 of 2

Comments:

* Times are displayed in (GMT-07:00) Mountain Time (US & Canada)

Wk2

-2037580350 MultipleChoice 15 True

0 -2037580350 MultipleChoice 15

-2037580349 MultipleChoice 18 False

0 -2037580349 MultipleChoice 18

-2037580348 MultipleChoice 19 True

0 -2037580348 MultipleChoice 19

Page 5: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Grading Summary

These are the automatically computed results of your exam. Grades for essay questions, and comments from your instructor, are in the "Details" section below.

Date Taken: 4/27/2013Time Spent: 29 min , 06 secs Points Received: 16 / 20 (80%)

Question Type: # Of Questions: # Correct:

Multiple Choice 10 8

Grade Details - All Questions

1. Question : Which part of a MAC address is called the organizationally unique identifier (OUI)?

Student Answer:The first 24 bits, or 3 bytes

The first 12 bits, or 3 bytes

The first 24 bits, or 6 bytes

The first 32 bits, or 3 bytes

Type: FB

Points Received: 2 of 2

Comments:

2. Question : Which of the following will best improve network performance by increasing the bandwidth available to hosts and limiting the size of the broadcast domains?

Student Answer:Adding more router ports for each LAN

Adding bridges to the network

Adding switches

Adding switches with VLANs

Points Received: 2 of 2

Comments:

3. Question : Also called thicknet, this cable type uses vampire taps to connect devices

-2026306165 MultipleChoice 12 True

0 -2026306165 MultipleChoice 12

-2026306164 MultipleChoice 4 True

0 -2026306164 MultipleChoice 4

Page 6: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

to cables:

Student Answer:10Base5

10BaseT

Category 5 UTP cable

Fiber-optic cable

Points Received: 0 of 2

Comments:

4. Question : You want to implement a network medium that is not susceptible to EMI. What type of cabling should you use?

Student Answer:Thicknet

Thinnet

Category 5 UTP

Category 5+ UTP

Fiber-optic cable

Points Received: 2 of 2

Comments:

5. Question : Which statement is correct with regard to a MAC address?

Student Answer:A MAC, or logical, address is a 48-bit6-byte) address written in a

hexadecimal format.

A Mac, or hardware, address is a 64-bit(6-byte) address written in a say in a hexadecimal format.

A MAC, or hardware, address is a 48-bit(6-byte) address written in a binary format.

A MAC, or hardware, address is a 48-bit(6-byte) address written in a hexadecimal

-2026306163 MultipleChoice 7 False

0 -2026306163 MultipleChoice 7

-2026306162 MultipleChoice 3 True

0 -2026306162 MultipleChoice 3

Page 7: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Points Received: 2 of 2

Comments:

6. Question : What type of RJ45 UTP cable is used between switches?

Student Answer:Straight-through

Crossover cable

Crossover with a CSU\DSU

Crossover with a router in between the two switches

Points Received: 2 of 2

Comments:

7. Question : Which of the following statements is false with respect to full duplex?

Student Answer:There are no collisions in full-duplex mode.

A dedicated switch port is required for each full-duplex node.

There are few collisions in full -- duplex mode.

The host network card and the switch port must be capable of operating in full-duplex mode.

Points Received: 0 of 2

Comments:

8. Question : Which of the following contention mechanisms is used by Ethernet?

Student Answer:Token passing

CSMA/CD

CSMA/CA

-2026306161 MultipleChoice 11 True

0 -2026306161 MultipleChoice 11

-2026306160 MultipleChoice 8 True

0 -2026306160 MultipleChoice 8

-2026306159 MultipleChoice 17 False

0 -2026306159 MultipleChoice 17

Page 8: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Host Polling

Points Received: 2 of 2

Comments:

9. Question : In the operation of CSMA/CD, which host(s) have priority after the expiration of the backoff algorithm?

Student Answer:All hosts have equal priority.

The two churched that caused the collision will have equal priority.

The host that sent the jam signal after collision.

The host with the highest MAC address.

Points Received: 2 of 2

Comments:

10. Question : Which of the following is correct?

Student Answer:Full-duplex Ethernet uses one pair of wires.

Full-duplex Ethernet uses to pairs of wires.

Half-duplex Ethernet uses two pairs of wires

Full-duplex Ethernet uses three pairs of wires.

Points Received: 2 of 2

Comments:

* Times are displayed in (GMT-07:00) Mountain Time (US & Canada)

Wk 3

-2026306158 MultipleChoice 14 True

0 -2026306158 MultipleChoice 14

-2026306157 MultipleChoice 15 True

0 -2026306157 MultipleChoice 15

-2026306156 MultipleChoice 16 True

0 -2026306156 MultipleChoice 16

Page 9: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Grading Summary

These are the automatically computed results of your exam. Grades for essay questions, and comments from your instructor, are in the "Details" section below.

Date Taken: 5/4/2013Time Spent: 42 min , 15 secs Points Received: 20 / 20 (100%)

Question Type: # Of Questions: # Correct:

Multiple Choice 9 9

Matching 1 1

Grade Details - All Questions

1. Question : Which class of IP address provides a maximum of only 254 host addresses per network ID?

Student Answer:Class A

Class B

Class C

Class D

Class E

Points Received: 2 of 2

Comments:

2. Question : Name the four layers of the DoD reference model:

Student Answer:Process/Application layer

Host-to-Host layer

Internet layer

Network Access layer

Points Received: 2 of 2

Comments:

-2016403446 MultipleChoice 9 True

0 -2016403446 MultipleChoice 9

Page 10: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

3. Question : When discussing reserved IP addresses which of the following is interpreted to mean “all networks?”

Student Answer:Node address of all 1s

Network address of all 1s

Network address of all 0s

Node address of all 0s

Type: FB

Points Received: 2 of 2

Comments:

4. Question : You want to implement a mechanism that automates the IP configuration, including IP address, subnet mask, default gateway, and DNS information. Which protocol will you use to accomplish this?

Student Answer:SMTP

SNMP

DHCP

ARP

Points Received: 2 of 2

Comments:

5. Question : What controls how much information is transferred from one end to the other?

Student Answer:Broadcast domains

IEEE

Windowing

-2016403445 MultipleChoice 3 True

0 -2016403445 MultipleChoice 3

-2016403444 MultipleChoice 2 True

0 -2016403444 MultipleChoice 2

-2016403443 MultipleChoice 8 True

0 -2016403443 MultipleChoice 8

Page 11: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Bit registers

Points Received: 2 of 2

Comments:

6. Question : Which of the following allows a router to respond to an ARP request that is intended for a remote host?

Student Answer:Gateway DP

Reverse ARP (RARP)

Proxy ARP

Inverse ARP(IARP)

Address Resolution Protocol (ARP)

Points Received: 2 of 2

Comments:

7. Question : What protocol sends redirects to an originating router?

Student Answer:TCP

IP

ICMP

UDP

Points Received: 2 of 2

Comments:

8. Question : Which protocol is used to find the hardware address of a host from a known IP address?

Student Answer:RARP

-2016403442 MultipleChoice 5 True

0 -2016403442 MultipleChoice 5

-2016403441 MultipleChoice 11 True

0 -2016403441 MultipleChoice 11

-2016403440 MultipleChoice 13 True

0 -2016403440 MultipleChoice 13

Page 12: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

ARP

DNS

DHCP

Points Received: 2 of 2

Comments:

9. Question : Match the following protocols with their port numbers:

Student Answer:: FTP

» 5 : port 21

: News» 6 : port 144

: Telnet» 2 : port 23

: TFTP» 1 : port 69

: DNS» 8 : port 53

: POP3» 4 : port 110

: UDP» 7 : port 17

: TCP» 3 : port 6

Points Received: 2 of 2

Comments:

10. Question : If you use either Telnet or FTP, what layer are you using to generate the data?

Student Answer:Application

Presentation

Session

Transport

-2016403439 MultipleChoice 12 True

0 -2016403439 MultipleChoice 12

5

6

2

1

8

4

7

3

-2016403438 Matching 1 True

0 -2016403438 Matching 1

Page 13: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Points Received: 2 of 2

Comments:

* Times are displayed in (GMT-07:00) Mountain Time (US & Canada)

Wk 4

Grading Summary

These are the automatically computed results of your exam. Grades for essay questions, and comments from your instructor, are in the "Details" section below.

Date Taken: 5/11/2013Time Spent: 41 min , 23 secs Points Received: 20 / 20 (100%)

Question Type: # Of Questions: # Correct:

Multiple Choice 10 10

Grade Details - All Questions

1. Question : What is the class of address, the subnet address, and the host address of the following IP address: 172.16.10.5 255.255.248.0?

Student Answer:Class A, 172.16, and 10.5.

Class B, 172.16.8.0, and 10.5.

Class B, 172.16.10.0, and 5.

Class C, 172.16.10.5, and 5.

This is not a legal host address.

Points Received: 2 of 2

Comments:

2. Question : You have a network that needs 29 subnets while maximizing the number of host addresses available on each subnet. How many bits must you borrow from the host field to provide the correct subnet mask?

Student Answer:2

-2016403437 MultipleChoice 16 True

0 -2016403437 MultipleChoice 16

-2006996011 MultipleChoice 3 True

0 -2006996011 MultipleChoice 3

Page 14: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

3

4

5

6

7

Points Received: 2 of 2

Comments:

3. Question : What is the maximum number of IP addresses that can be assigned to hosts on a local subnet that uses the 255.255.255.224 subnet mask?

Student Answer:14

15

16

30

31

62

Points Received: 2 of 2

Comments:

4. Question : What is the valid host range for the subnet in which the IP address 192.168.10.206 255.255.255.240 resides?

Student Answer:1–254

1–126

193–206

177–206

-2006996010 MultipleChoice 9 True

0 -2006996010 MultipleChoice 9

-2006996009 MultipleChoice 11 True

0 -2006996009 MultipleChoice 11

Page 15: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Points Received: 2 of 2

Comments:

5. Question : Which part is the default network portion and which part is the host portion of the address 126.10.127.3?

Student Answer:Network 126.10, node 127.3

Network 126.10.127, node 3

Network 126.1, node 0.127.3

Network 126, node 10.127.3

Points Received: 2 of 2

Comments:

6. Question : When discussing reserved IP addresses which of the following is interpreted to mean “all networks?”

Student Answer:Node address of all 1s

Network address of all 1s

Network address of all 0s

Node address of all 0s

Points Received: 2 of 2

Comments:

7. Question : What is the maximum number of IP addresses that can be assigned to hosts on a local subnet that uses the 255.255.255.224 subnet mask?

Student Answer:14

15

16

-2006996008 MultipleChoice 6 True

0 -2006996008 MultipleChoice 6

-2006996007 MultipleChoice 4 True

0 -2006996007 MultipleChoice 4

-2006996006 MultipleChoice 2 True

0 -2006996006 MultipleChoice 2

Page 16: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

30

31

62

Points Received: 2 of 2

Comments:

8. Question : What is the subnetwork address for a host with the IP address 200.10.5.68/28?

Student Answer:200.15.5.56

200.10.5.32

200.10.5.64

200.10.5.0

Points Received: 2 of 2

Comments:

9. Question : If you wanted to have 16 subnets with a Class C network ID, which subnet mask would you use?

Student Answer:255.255.255.252

255.255.255.248

255.255.255.240

255.255.255.255

Points Received: 2 of 2

Comments:

10. Question : What is the subnetwork number of a host with an IP address of 172.16.66.0/21?

-2006996005 MultipleChoice 8 True

0 -2006996005 MultipleChoice 8

-2006996004 MultipleChoice 13 True

0 -2006996004 MultipleChoice 13

-2006996003 MultipleChoice 1 True

0 -2006996003 MultipleChoice 1

Page 17: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Student Answer:172.16.36.0

172.16.48.0

172.16.64.0

172.16.0.0

Points Received: 2 of 2

Comments:

* Times are displayed in (GMT-07:00) Mountain Time (US & Canada)

Wk 5

Grading Summary

These are the automatically computed results of your exam. Grades for essay questions, and comments from your instructor, are in the "Details" section below.

Date Taken: 5/18/2013Time Spent: 25 min , 04 secs Points Received: 16 / 20 (80%)

Question Type: # Of Questions: # Correct:

Multiple Choice 10 8

Grade Details - All Questions

1. Question : What network service is the most likely problem if you can ping a computer by IP address but not by name?

Student Answer:DNS

DHCP

ARP

ICMP

Points Received: 2 of 2

Comments:

-2006996002 MultipleChoice 17 True

0 -2006996002 MultipleChoice 17

-1998485150 MultipleChoice 8 True

0 -1998485150 MultipleChoice 8

Page 18: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

2. Question : The ______________ command shows the hop or hops that a packet traverses on it way to a remote device.

Student Answer:traceroute

Type: FB

Points Received: 2 of 2

Comments:

3. Question : When a ping to the loopback address fails, what can you assume?

Student Answer:The IP address of the local host is incorrect.

The IP address of the remote host is incorrect.

The NIC is not funvtional.

The IP stack has failed to initialize.

Points Received: 2 of 2

Comments:

4. Question : To test the IP stack on your local host, which IP address would you ping?

Student Answer:127.0.0.0

1.0.0.127

127.0.0.1

127.0.0.255

255.255.255.255

Points Received: 2 of 2

Comments:

5. Question : Your router receives a summary address of 192.168.176/21. What

-1998485149 MultipleChoice 3 True

0 -1998485149 MultipleChoice 3

-1998485148 MultipleChoice 7 True

0 -1998485148 MultipleChoice 7

-1998485147 MultipleChoice 5 True

0 -1998485147 MultipleChoice 5

Page 19: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

address range will your router forward based on this summary address?

Student Answer:192.168.0.1 through 192.168.255.254

192.168.176.1 through 192.168.176.255

192.168.176.1 through 192.168.191.254

192.168.176.1 through 192.168.183.254

Type: FB

Points Received: 0 of 2

Comments:

6. Question : Which of the following is a result of route aggregation?

Student Answer:Smaller routing tables

More complete routing tables

Increased memory usage

Increased CPU usage

Points Received: 2 of 2

Comments:

7. Question : What is the only connection type that supports the use of the /30 mask?

Student Answer:Point-to-multipoint

Point-to-point

Multipoint-to-multipoint

Host to switch

Points Received: 2 of 2

Comments:

-1998485146 MultipleChoice 1 False

0 -1998485146 MultipleChoice 1

-1998485145 MultipleChoice 19 True

0 -1998485145 MultipleChoice 19

-1998485144 MultipleChoice 16 True

Page 20: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

8. Question : Which subnet mask is the most efficient for point-to-point serial links when using VLSM?

Student Answer:255.255.255.0

255.255.255.248

255.255.255.252

255.255.255.254

Points Received: 0 of 2

Comments:

9. Question : The network address used to advertise a summary address is always which of the following?

Student Answer:The last network address in the block.

The next to last network in the block

The second network in the block.

The first network in the block.

Points Received: 2 of 2

Comments:

10. Question : What wildcard mask would be used with a network address that has a range of 172.16.16.0 through 172.16.31.0?

Student Answer:0.0.15.255

0.0.255.255

0.255.255.255

0.0.0.31~The block size for this network is 16.0, and the wildcard mask is one less than the block size for networks in this address range.

0 -1998485144 MultipleChoice 16

-1998485143 MultipleChoice 10 False

0 -1998485143 MultipleChoice 10

-1998485142 MultipleChoice 20 True

0 -1998485142 MultipleChoice 20

Page 21: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Points Received: 2 of 2

Comments:

* Times are displayed in (GMT-07:00) Mountain Time (US & Canada)

Wk 6

Grading Summary

These are the automatically computed results of your exam. Grades for essay questions, and comments from your instructor, are in the "Details" section below.

Date Taken: 5/25/2013Time Spent: 39 min , 49 secs Points Received: 20 / 20 (100%)

Question Type: # Of Questions: # Correct:

Multiple Choice 10 10

Grade Details - All Questions

1. Question : Which of the following commands displays the configurable parameters and statistics of all interfaces on a router?

Student Answer:show running-config

show startup-config

show interfaces

show versions

Points Received: 2 of 2

Comments:

2. Question : In the Setup dialog, what do the square brackets ([ ]) indicate?

Student Answer:Commands left to enter

Optional features

Areas not configured

-1998485141 MultipleChoice 11 True

0 -1998485141 MultipleChoice 11

-1989492276 MultipleChoice 17 True

0 -1989492276 MultipleChoice 17

Page 22: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Default settings

Points Received: 2 of 2

Comments:

3. Question : Which command is used to manually encrypt your passwords?

Student Answer:Manual encryption

Manual-encryption

Service password encryption

Service password-encryption

Points Received: 2 of 2

Comments:

4. Question : Which mode enables you to view and change the configuration of a Cisco router?

Student Answer:Basic Management mode

Extended Setup mode

User mode

Privileged mode

Points Received: 2 of 2

Comments:

5. Question : Which switch IOS command allows access to high-level commands, such as debug?

Student Answer:ip default-gateway

hostname

-1989492275 MultipleChoice 9 True

0 -1989492275 MultipleChoice 9

-1989492274 MultipleChoice 5 True

0 -1989492274 MultipleChoice 5

-1989492273 MultipleChoice 3 True

0 -1989492273 MultipleChoice 3

Page 23: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

IP address

configure terminal

enable

Points Received: 2 of 2

Comments:

6. Question : Which command is used to manually encrypt passwords on a Cisco router?

Student Answer:Router#service password-encryption

Router(config)#service-password-encryption

Router(config)#service password-encryption

Router(config)#set password encrypt on

Points Received: 2 of 2

Comments:

7. Question : Which of the following commands will configure all the default VTY ports on a router?

Student Answer:Router#line vty 0 4

Router(config)#line vty 0 4

Router(config-if)#line console 0

Router(config)#line vty all

Points Received: 2 of 2

Comments:

8. Question : Which command is used to enable an interface?

-1989492272 MultipleChoice 7 True

0 -1989492272 MultipleChoice 7

-1989492271 MultipleChoice 1 True

0 -1989492271 MultipleChoice 1

-1989492270 MultipleChoice 13 True

0 -1989492270 MultipleChoice 13

Page 24: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Student Answer:No shutdown

Interface turn on

Interface turn-on

No shut-down interface

Points Received: 2 of 2

Comments:

9. Question : Which of the following is a correct combination of file type and default location in a Cisco router?

Student Answer:IOS/NVRAM

Startup configuration/flash memory

IOS/flash memory

Running configuration/NVRAM

Points Received: 2 of 2

Comments:

10. Question : Which of the following connection methods available to connect to a router is considered out-of-band?

Student Answer:Serial port

VTY port

HTTP port

Aux port

Points Received: 2 of 2

Comments:

-1989492269 MultipleChoice 6 True

0 -1989492269 MultipleChoice 6

-1989492268 MultipleChoice 12 True

0 -1989492268 MultipleChoice 12

-1989492267 MultipleChoice 10 True

0 -1989492267 MultipleChoice 10

Page 25: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

* Times are displayed in (GMT-07:00) Mountain Time (US & Canada)

Wk9

Grading Summary

These are the automatically computed results of your exam. Grades for essay questions, and comments from your instructor, are in the "Details" section below.

Date Taken: 7/18/2013Time Spent: 16 secs Points Received: 0 / 20 (0%)

Question Type: # Of Questions: # Correct:

Multiple Choice 10 0

Grade Details - All Questions

1. Question : ____________________ is the process of an administrator manually adding routes in each router’s routing table.

Student Answer:Static routing

static routing

Type: FB

Points Received: (not graded)

Comments:

2. Question : State the three classes of routing protocols:

Student Answer:Distance Vector Routing Protocols

Link State Routing Protocols

Hybrid Routing Protocols

distance vector routing protocols

link state routing protocols

hybrid routing protocols

Type: FB

Points Received: (not graded)

Comments:

-1937611852 MultipleChoice 3 False

0 -1937611852 MultipleChoice 3

-1937611851 MultipleChoice 7 False

Page 26: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

3. Question : If your routing table has a static, a RIP, and an EIGRP route to the same network, which route will be used to route packets by default?

Student Answer:Any available route

RIP route

Static route

EIGRP route

They will all load-balance

Points Received: (not graded)

Comments:

4. Question : Which command displays RIP routing updates?

Student Answer:show ip route

debug ip rip

how protocols

debug ip route

Points Received: (not graded)

Comments:

5. Question : Two connected routers are configured only with RIP routing. What will be the result when a router receives a routing update that contains a higher-cost path to a network already in its routing table?

Student Answer:The updated information will be added to the existing routing table.

The update will be ignored and no further action will occur.

The updated information will replace the existing routing table entry.

The existing routing table entry will be deleted from the routing table and all routers will exchange routing updates to reach convergence.

0 -1937611851 MultipleChoice 7

-1937611850 MultipleChoice 16 False

0 -1937611850 MultipleChoice 16

-1937611849 MultipleChoice 12 False

0 -1937611849 MultipleChoice 12

Page 27: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Points Received: (not graded)

Comments:

6. Question : Which of the following is true about route poisoning?

Student Answer:It sends back the protocol received from a router as a poison pill,

which stops the regular updates.

It is information received from a router that can't be sent back to the originating router.

It prevents regular update messages from reinstating a route that has just come up.

It describes when a router sets the metric for a downed link to infinity.

Points Received: (not graded)

Comments:

7. Question : What command will prevent RIP routing updates from exiting an interface but will still allow the interface to receive RIP route updates?

Student Answer:Router(config-if)#no routing

Router(config-if)#passive-interface

Router(config-router)#passive-interface s0

Router(config-router)#no routing updates

Points Received: (not graded)

Comments:

8. Question : ____________________ is the process of using protocols to find and update routing tables on routers.

Student Answer:Dynamic routing

-1937611848 MultipleChoice 17 False

0 -1937611848 MultipleChoice 17

-1937611847 MultipleChoice 18 False

0 -1937611847 MultipleChoice 18

-1937611846 MultipleChoice 10 False

0 -1937611846 MultipleChoice 10

Page 28: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

dynamic routing

Points Received: (not graded)

Comments:

9. Question : You type debug ip rip on your router console and see that 172.16.10.0 is being advertised to you with a metric of 16. What does this mean?

Student Answer:The route is 16 hops away.

The route has a delay of 16 microseconds

The route is inaccessible.

The route is queued at 16 messages a second.

Points Received: (not graded)

Comments:

10. Question : What metric does RIPv2 use to find the best path to a remote network?

Student Answer:Hop count

MTU

Cumulative interface delay

Load

Path bandwidth value

Points Received: (not graded)

Comments:

* Times are displayed in (GMT-07:00) Mountain Time (US & Canada)

Wk 11

Grading Summary

-1937611845 MultipleChoice 5 False

0 -1937611845 MultipleChoice 5

-1937611844 MultipleChoice 14 False

0 -1937611844 MultipleChoice 14

-1937611843 MultipleChoice 15 False

0 -1937611843 MultipleChoice 15

Page 29: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

These are the automatically computed results of your exam. Grades for essay questions, and comments from your instructor, are in the "Details" section below.

Date Taken: 7/18/2013Time Spent: 07 secs Points Received: 0 / 20 (0%)

Question Type: # Of Questions: # Correct:

True/False 1 0

Multiple Choice 9 0

Grade Details - All Questions

1. Question : Which command will display all the EIGRP feasible successor routes known to a router?

Student Answer:show ip routes *

show ip eigrp summary

show ip eigrp topology

show ip eigrp adjacencies

show ip eigrp neighbors detail

Points Received: (not graded)

Comments:

2. Question : When using default routing, what command must you use so that remote subnets not listed in the routing table will not be dropped?

Student Answer:ip route

classful

ip classless

do not drop

Points Received: (not graded)

Comments:

3. Question : True or False: Routers that belong to different AS automatically share

-1937611420 MultipleChoice 8 False

0 -1937611420 MultipleChoice 8

-1937611419 MultipleChoice 2 False

0 -1937611419 MultipleChoice 2

Page 30: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

routing information, and they don’t become neighbors.

Student Answer: True False

Points Received: 0 of 2

Comments:

4. Question : On what type of networks can default routing be used?

Student Answer:Dynamic

Static

Stub

Homogeneous

Points Received: (not graded)

Comments:

5. Question : What is the default administrative distance of a static route if you use an exit interface instead of a next hop address?

Student Answer:1

0

15

110

Points Received: (not graded)

Comments:

6. Question : You want to use a routing protocol that utilizes the benefits of both distance vector and link state. Which routing protocol will you use?

Student Answer:UDP

-1937611418 TrueFalse 2 False

$StudentAnsw er -1937611418 TrueFalse 2

-1937611417 MultipleChoice 3 False

0 -1937611417 MultipleChoice 3

-1937611416 MultipleChoice 1 False

0 -1937611416 MultipleChoice 1

Page 31: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

RIP

EIGRP

OSPF

Points Received: (not graded)

Comments:

7. Question : What conditions must be met for Neighborship establishment?

Student Answer:Hello or ACK received

AS numbers mismatch

AS numbers match

Identical metrics (M values)

Identical metrics (K values)

Points Received: (not graded)

Comments:

8. Question : With which network type will OSPF establish router adjacencies but not perform the DR/BDR election process?

Student Answer:Point-to-point

Backbone area 0

Broadcast multi-access

Non-broadcast multi-access

Points Received: (not graded)

Comments:

-1937611415 MultipleChoice 4 False

0 -1937611415 MultipleChoice 4

-1937611414 MultipleChoice 5 False

0 -1937611414 MultipleChoice 5

-1937611413 MultipleChoice 11 False

0 -1937611413 MultipleChoice 11

Page 32: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

9. Question : What is the administrative distance of OSPF?

Student Answer:90

100

110

120

Points Received: (not graded)

Comments:

10. Question : Correctly identify the type of routing protocols required for the following protocols:

EIGRP <==> ______IGRP <==> ______RIP <==> ______OSPF <==> ______

Student Answer:Link state

Dsitance vectorDistance vectorHybrid or Advanced Distance Vector

Distance vectorLink stateDistance vectorHybrid or Advanced Distance Vector

Hybrid or Advanced Distance vectorDistance vectorDistance vectorLink state

Distance vectorHybrid or Advanced Distance VectorDistance vectorLink state

Points Received: (not graded)

Comments:

* Times are displayed in (GMT-07:00) Mountain Time (US & Canada)

Wk12

-1937611412 MultipleChoice 12 False

0 -1937611412 MultipleChoice 12

-1937611411 MultipleChoice 13 False

0 -1937611411 MultipleChoice 13

Page 33: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Grading Summary

These are the automatically computed results of your exam. Grades for essay questions, and comments from your instructor, are in the "Details" section below.

Date Taken: 7/18/2013Time Spent: 07 secs Points Received: 0 / 20 (0%)

Question Type: # Of Questions: # Correct:

Multiple Choice 10 0

Grade Details - All Questions

1. Question : If a switch receives a frame and the source MAC address is not in the MAC address table but the destination address is, what will the switch do with the frame?

Student Answer:Discard it and send an error message back to the originating host

Flood the network with the frame

Add the source address and port to the MAC address table and forward the frame out the destination port

Add the destination to the MAC address table and then forward the frame

Points Received: (not graded)

Comments:

2. Question : A switch has a port that is alternating between green and amber. Which condition could this indicate?

Student Answer:The port is experiencing errors

The port is administratively disabled

The port is blocked by STP

The port is normal

Points Received: (not graded)

Comments:

3. Question : What command will display the forward/filter table?

-1937611052 MultipleChoice 8 False

0 -1937611052 MultipleChoice 8

-1937611051 MultipleChoice 1 False

0 -1937611051 MultipleChoice 1

Page 34: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Student Answer:show mac filter

show run

show mac address-table

show mac filter-table

Points Received: (not graded)

Comments:

4. Question : Which of the following statements is true?

Student Answer:A switch creates a single collision domain and a single broadcast

domain. A router creates a single collision domain.

A switch creates separate collision domains but one broadcast domain. A router provides a separate broadcast domain.

A switch creates a single collision domain and separate broadcast domains. A router provides a separate broadcast domain as well.

A switch creates separate collision domains and separate broadcast domains. A router provides separate collision domains.

Points Received: (not graded)

Comments:

5. Question : What will a switch do with a frame received on a port that has a destination MAC address not in the mac address-table?

Student Answer:The switch will send an ARP request out to all ports, except the port

from which the data originated.

The switch will flood the data out all ports, except the port from which the data originated.

The frame will be forwarded to the switch’s default-gateway

The frame will be dropped

Points Received: (not graded)

-1937611050 MultipleChoice 4 False

0 -1937611050 MultipleChoice 4

-1937611049 MultipleChoice 6 False

0 -1937611049 MultipleChoice 6

Page 35: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

Comments:

6. Question : In which circumstance are multiple copies of the same unicast frame likely to be transmitted in a switched LAN?

Student Answer:During high-traffic periods

After broken links are reestablished

When upper-layer protocols require high reliability

In an improperly implemented redundant topology

Points Received: (not graded)

Comments:

7. Question : What is the purpose of Spanning Tree Protocol in a switched LAN?

Student Answer:To provide a mechanism for network monitoring in switched

environments

To prevent routing loops in networks with redundant paths

To prevent switching loops in networks with redundant switched paths

To manage the VLAN database across multiple switches

Points Received: (not graded)

Comments:

8. Question : Which protocol will find all links in a network and shut down redundant links?

Student Answer:STP

UTP

NFS

-1937611048 MultipleChoice 2 False

0 -1937611048 MultipleChoice 2

-1937611047 MultipleChoice 15 False

0 -1937611047 MultipleChoice 15

-1937611046 MultipleChoice 14 False

0 -1937611046 MultipleChoice 14

Page 36: Cisco Cert Network Associate Networking Routing 1 Quiz Answers

DIX

Points Received: (not graded)

Comments:

9. Question : Which of the following is a layer 2 protocol used to maintain a loop-free network?

Student Answer:VTP

STP

RIP

CDP

Points Received: (not graded)

Comments:

10. Question : Which of the following will prevent a broadcast storm?

Student Answer:Forward/Filter decisions

Address learning

Bridges

Loop avoidance scheme

Points Received: (not graded)

Comments:

* Times are displayed in (GMT-07:00) Mountain Time (US & Canada)

-1937611045 MultipleChoice 11 False

0 -1937611045 MultipleChoice 11

-1937611044 MultipleChoice 12 False

0 -1937611044 MultipleChoice 12

-1937611043 MultipleChoice 10 False

0 -1937611043 MultipleChoice 10