cisco ccna routing and switching boot camp (ccnax...

33
CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456 Cisco CCNA Routing and Switching Boot Camp (CCNAX - Accelerated) Duration: 5 Days Course Code: CCNABC Version: 2.0 Delivery Method: Virtual and Classroom Overview: Our accelerated CCNA Boot Camp is an intensive program, designed to help you achieve your CCNA Routing and Switching certification in a reduced period of time. To maximize your classroom experience and ensure that you get a comprehensive coverage of the CCNA Routing and Switching materials, our three-step, blended learning approach to the CCNA Boot Camp consists of: Pre-Class Activity, Classroom Instruction and Post-Class Lab Practice. The Pre-Class Activity provides you with approximately ten hours of review materials and exercises, including a a pre-test assessment, all of which is designed to give you a firm foundation and get you focused before you enter the classroom. Classroom Instruction includes intensive instructor-led training and hands-on labs, students will learn how to install, operate, configure, and verify a basic IPv4 and IPv6 network, including configuring a LAN switch, configuring an IP router, identifying basic security threats, understanding redundant topologies, troubleshooting common network issues, connecting to a WAN,configuring EIGRP and OSPF in both IPv4 and IPv6, understanding wide-area network technologies, and getting familiar with device management and Cisco licensing. You will have 24-hour lab access during the course. Following the course you will be provided with ten e-Lab credits, which can be used for additional Lab Practice allowing you to hone your skills using the same hands-on lab equipment you used in the classroom. Please note this Boot Camp is scheduled to run from 09:30 to 19:00. Exact timings may vary. Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins. Target Audience: Individuals seeking the Cisco CCNA Routing and Switching certification. The course is also appropriate for pre-sales and post-sales network engineers involved in the installation and support of enterprise branch office networks. Objectives: After you complete this course you should be able to: behind Layer 3 redundancy Describe network fundamentals and build simple LANs Troubleshoot IP connectivity Establish Internet connectivity Define the characteristics, functions, and components of a WAN Manage network device security Configure and troubleshoot EIGRP in an IPv4 environment, and configure EIGRP for IPv6 Describe IPv6 basics Configure, verify, and troubleshoot multi-area OSPF Troubleshoot VLAN issues, explain how STP works, configure EtherChannel, and understand the idea Describe SNMP, syslog and NetFlow, and manage Cisco device configurations, IOS images, and licenses

Upload: others

Post on 25-Mar-2020

30 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Cisco CCNA Routing and Switching Boot Camp (CCNAX - Accelerated)

Duration: 5 Days Course Code: CCNABC Version: 2.0 Delivery Method: Virtual and Classroom

Overview:

Our accelerated CCNA Boot Camp is an intensive program, designed to help you achieve your CCNA Routing and Switching certification in areduced period of time. To maximize your classroom experience and ensure that you get a comprehensive coverage of the CCNA Routing andSwitching materials, our three-step, blended learning approach to the CCNA Boot Camp consists of: Pre-Class Activity, Classroom Instructionand Post-Class Lab Practice.The Pre-Class Activity provides you with approximately ten hours of review materials and exercises, including a a pre-test assessment, all ofwhich is designed to give you a firm foundation and get you focused before you enter the classroom.Classroom Instruction includes intensive instructor-led training and hands-on labs, students will learn how to install, operate, configure, andverify a basic IPv4 and IPv6 network, including configuring a LAN switch, configuring an IP router, identifying basic security threats,understanding redundant topologies, troubleshooting common network issues, connecting to a WAN,configuring EIGRP and OSPF in both IPv4and IPv6, understanding wide-area network technologies, and getting familiar with device management and Cisco licensing. You will have24-hour lab access during the course. Following the course you will be provided with ten e-Lab credits, which can be used for additional Lab Practice allowing you to hone your skillsusing the same hands-on lab equipment you used in the classroom.

Please note this Boot Camp is scheduled to run from 09:30 to 19:00. Exact timings may vary.

Virtual Learning

This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have anydelegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, GlobalKnowledge will send you all the information needed before the start of the course and you can test the logins.

Target Audience:

Individuals seeking the Cisco CCNA Routing and Switching certification. The course is also appropriate for pre-sales and post-sales networkengineers involved in the installation and support of enterprise branch office networks.

Objectives:

After you complete this course you should be able to: behind Layer 3 redundancy

Describe network fundamentals and build simple LANs

Troubleshoot IP connectivity

Establish Internet connectivity

Define the characteristics, functions, and components of a WAN

Manage network device security

Configure and troubleshoot EIGRP in an IPv4 environment, andconfigure EIGRP for IPv6

Describe IPv6 basics

Configure, verify, and troubleshoot multi-area OSPFTroubleshoot VLAN issues, explain how STP works, configureEtherChannel, and understand the idea

Describe SNMP, syslog and NetFlow, and manage Cisco deviceconfigurations, IOS images, and licenses

Page 2: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Prerequisites: Testing and Certification

Attendees should meet the following prerequisites before Recommended preparation for exam(s):attending our CCNA Routing and Switching Boot Camp:

200-120 - CCNA Cisco Certified Network Associate Routing andBasic Windows navigation and keyboard literacy skills Switching Basic Internet usage skills Basic IP addressing knowledge

Follow-on-Courses:

The following Courses are recommended for further study:

ROUTE - Implementing Cisco IP RoutingSWITCH - Implementing Cisco Switched NetworksTSHOOT - Troubleshooting and Maintaining Cisco IP Networks

Page 3: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Content:

Building a Simple Networkline line line

Exploring the Functions of Networking Understanding the Host-to-Host Understanding the Host-to-HostCommunications Model Communications ModelIntroducing LANs Introducing LANs

line Operating Cisco IOS Software Operating Cisco IOS SoftwareUnderstanding the Host-to-Host Starting a Switch Starting a SwitchCommunications Model Understanding Ethernet and Switch Understanding Ethernet and SwitchIntroducing LANs Operation OperationOperating Cisco IOS Software Troubleshooting Common Switch Media Troubleshooting Common Switch MediaStarting a Switch Issues IssuesUnderstanding Ethernet and Switch Understanding IP Addressing and Understanding IP Addressing and SubnetsOperation Subnets Understanding the TCP/IP Transport LayerTroubleshooting Common Switch Media Understanding the TCP/IP Transport Exploring the Functions of RoutingIssues Layer Configuring a Cisco RouterUnderstanding IP Addressing and Subnets Exploring the Functions of Routing Exploring the Packet Delivery ProcessUnderstanding the TCP/IP Transport Layer Configuring a Cisco Router Enabling Static RoutingExploring the Functions of Routing Exploring the Packet Delivery Process Managing Traffic Using ACLsConfiguring a Cisco Router Enabling Static Routing Enabling Internet ConnectivityExploring the Packet Delivery Process Managing Traffic Using ACLs Implementing Device HardeningEnabling Static Routing Enabling Internet Connectivity Implementing Traffic Filtering with ACLs Managing Traffic Using ACLs Implementing Device Hardening Understanding IPv6Enabling Internet Connectivity Implementing Traffic Filtering with ACLs Configuring IPv6 RoutingImplementing Device Hardening Understanding IPv6 Routing Between VLANsImplementing Traffic Filtering with ACLs Configuring IPv6 Routing Using a Cisco Network Device as a DHCPUnderstanding IPv6 Routing Between VLANs ServerConfiguring IPv6 Routing Using a Cisco Network Device as a Troubleshooting VLAN ConnectivityRouting Between VLANs DHCP Server Building Redundant Switched TopologiesUsing a Cisco Network Device as a DHCP Troubleshooting VLAN Connectivity Improving Redundant Switched TopologiesServer Building Redundant Switched Topologies with EtherChannelTroubleshooting VLAN Connectivity Improving Redundant Switched Understanding Layer 3 RedundancyBuilding Redundant Switched Topologies Topologies with EtherChannel Troubleshooting IPv6 Network ConnectivityImproving Redundant Switched Topologies Understanding Layer 3 Redundancy Configuring Serial Encapsulationwith EtherChannel Troubleshooting IPv6 Network Establishing a WAN Connection UsingUnderstanding Layer 3 Redundancy Connectivity Frame RelayTroubleshooting IPv6 Network Connectivity Configuring Serial Encapsulation Introducing VPN SolutionsConfiguring Serial Encapsulation Establishing a WAN Connection Using Configuring GRE Tunnels Establishing a WAN Connection Using Frame Relay Troubleshooting EIGRPFrame Relay Introducing VPN Solutions Implementing EIGRP for IPv6 Introducing VPN Solutions Configuring GRE Tunnels Multiarea OSPF IPv4 ImplementationConfiguring GRE Tunnels Troubleshooting EIGRP Troubleshooting Multiarea OSPFTroubleshooting EIGRP Implementing EIGRP for IPv6 Examining OSPFv3 Implementing EIGRP for IPv6 Multiarea OSPF IPv4 Implementation Managing Cisco DevicesMultiarea OSPF IPv4 Implementation Troubleshooting Multiarea OSPF LicensingTroubleshooting Multiarea OSPF Examining OSPFv3 Lab 1-2: Troubleshooting Switch MediaExamining OSPFv3 Managing Cisco Devices IssuesManaging Cisco Devices Licensing Lab 2-1: Performing Initial Router SetupLicensing Lab 1-2: Troubleshooting Switch Media and ConfigurationLab 1-2: Troubleshooting Switch Media Issues Lab 2-2: Connecting to the InternetIssues Lab 2-1: Performing Initial Router Setup Lab 3-1: Enhancing the Security of theLab 2-1: Performing Initial Router Setup and and Configuration Initial ConfigurationConfiguration Lab 2-2: Connecting to the Internet Lab 3-2: Device HardeningLab 2-2: Connecting to the Internet Lab 3-1: Enhancing the Security of the Lab 3-3: Filtering Traffic with ACLsLab 3-1: Enhancing the Security of the Initial Initial Configuration Lab 4-1: Configure and Verify Basic IPv6Configuration Lab 3-2: Device Hardening Lab 4-2: Configure and Verify StatelessLab 3-2: Device Hardening Lab 3-3: Filtering Traffic with ACLs AutoconfigurationLab 3-3: Filtering Traffic with ACLs Lab 4-1: Configure and Verify Basic IPv6 Lab 4-3: Configure and Verify IPv6 RoutingLab 4-1: Configure and Verify Basic IPv6 Lab 4-2: Configure and Verify Stateless Lab 5-1: Configuring Expanded SwitchedLab 4-2: Configure and Verify Stateless Autoconfiguration NetworksAutoconfiguration Lab 4-3: Configure and Verify IPv6 Lab 5-2: Configuring DHCP ServerLab 4-3: Configure and Verify IPv6 Routing Routing Lab 5-3: Troubleshooting VLANs andLab 5-1: Configuring Expanded Switched Lab 5-1: Configuring Expanded Switched TrunksNetworks Networks Lab 5-4: Optimizing STPLab 5-2: Configuring DHCP Server Lab 5-2: Configuring DHCP Server Lab 5-5: Configuring EtherChannel

Page 4: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Lab 5-3: Troubleshooting VLANs and Trunks Lab 5-3: Troubleshooting VLANs and Lab 6-1: Troubleshooting IP ConnectivityLab 5-4: Optimizing STP Trunks Lab 7-1: Configuring and TroubleshootingLab 5-5: Configuring EtherChannel Lab 5-4: Optimizing STP a Serial ConnectionLab 6-1: Troubleshooting IP Connectivity Lab 5-5: Configuring EtherChannel Lab 7-2: Establishing a Frame Relay WANLab 7-1: Configuring and Troubleshooting a Lab 6-1: Troubleshooting IP Connectivity Lab 7-3: Establishing a GRE TunnelSerial Connection Lab 7-1: Configuring and Troubleshooting Lab 8-1: Implementing EIGRPLab 7-2: Establishing a Frame Relay WAN a Serial Connection Lab 8-2: Troubleshooting EIGRPLab 7-3: Establishing a GRE Tunnel Lab 7-2: Establishing a Frame Relay Lab 8-3: Implementing EIGRP for IPv6Lab 8-1: Implementing EIGRP WAN Lab 9-1: Implementing OSPFLab 8-2: Troubleshooting EIGRP Lab 7-3: Establishing a GRE Tunnel Lab 9-2: Configuring Multiarea OSPFLab 8-3: Implementing EIGRP for IPv6 Lab 8-1: Implementing EIGRP Lab 9-3: Troubleshooting Multiarea OSPFLab 9-1: Implementing OSPF Lab 8-2: Troubleshooting EIGRP Lab 9-4: Configuring OSPF for IPv6Lab 9-2: Configuring Multiarea OSPF Lab 8-3: Implementing EIGRP for IPv6 Lab 10-1: SNMP and Syslog BasicLab 9-3: Troubleshooting Multiarea OSPF Lab 9-1: Implementing OSPF ConfigurationLab 9-4: Configuring OSPF for IPv6 Lab 9-2: Configuring Multiarea OSPF Lab 10-2: Analyzing NetFlow DataLab 10-1: SNMP and Syslog Basic Lab 9-3: Troubleshooting Multiarea OSPF Lab 10-3: Managing Cisco Devices andConfiguration Lab 9-4: Configuring OSPF for IPv6 LicensingLab 10-2: Analyzing NetFlow Data Lab 10-1: SNMP and Syslog BasicLab 10-3: Managing Cisco Devices and ConfigurationLicensing Lab 10-2: Analyzing NetFlow Data line

Lab 10-3: Managing Cisco Devices and Understanding the Host-to-HostLicensing Communications Model

line Introducing LANsUnderstanding the Host-to-Host Operating Cisco IOS SoftwareCommunications Model line Starting a SwitchIntroducing LANs Understanding the Host-to-Host Understanding Ethernet and SwitchOperating Cisco IOS Software Communications Model OperationStarting a Switch Introducing LANs Troubleshooting Common Switch MediaUnderstanding Ethernet and Switch Operating Cisco IOS Software IssuesOperation Starting a Switch Understanding IP Addressing and SubnetsTroubleshooting Common Switch Media Understanding Ethernet and Switch Understanding the TCP/IP Transport LayerIssues Operation Exploring the Functions of RoutingUnderstanding IP Addressing and Subnets Troubleshooting Common Switch Media Configuring a Cisco RouterUnderstanding the TCP/IP Transport Layer Issues Exploring the Packet Delivery ProcessExploring the Functions of Routing Understanding IP Addressing and Enabling Static RoutingConfiguring a Cisco Router Subnets Managing Traffic Using ACLsExploring the Packet Delivery Process Understanding the TCP/IP Transport Enabling Internet ConnectivityEnabling Static Routing Layer Implementing Device HardeningManaging Traffic Using ACLs Exploring the Functions of Routing Implementing Traffic Filtering with ACLs Enabling Internet Connectivity Configuring a Cisco Router Understanding IPv6Implementing Device Hardening Exploring the Packet Delivery Process Configuring IPv6 RoutingImplementing Traffic Filtering with ACLs Enabling Static Routing Routing Between VLANsUnderstanding IPv6 Managing Traffic Using ACLs Using a Cisco Network Device as a DHCPConfiguring IPv6 Routing Enabling Internet Connectivity ServerRouting Between VLANs Implementing Device Hardening Troubleshooting VLAN ConnectivityUsing a Cisco Network Device as a DHCP Implementing Traffic Filtering with ACLs Building Redundant Switched TopologiesServer Understanding IPv6 Improving Redundant Switched TopologiesTroubleshooting VLAN Connectivity Configuring IPv6 Routing with EtherChannelBuilding Redundant Switched Topologies Routing Between VLANs Understanding Layer 3 RedundancyImproving Redundant Switched Topologies Using a Cisco Network Device as a Troubleshooting IPv6 Network Connectivitywith EtherChannel DHCP Server Configuring Serial EncapsulationUnderstanding Layer 3 Redundancy Troubleshooting VLAN Connectivity Establishing a WAN Connection UsingTroubleshooting IPv6 Network Connectivity Building Redundant Switched Topologies Frame RelayConfiguring Serial Encapsulation Improving Redundant Switched Introducing VPN SolutionsEstablishing a WAN Connection Using Topologies with EtherChannel Configuring GRE Tunnels Frame Relay Understanding Layer 3 Redundancy Troubleshooting EIGRPIntroducing VPN Solutions Troubleshooting IPv6 Network Implementing EIGRP for IPv6 Configuring GRE Tunnels Connectivity Multiarea OSPF IPv4 ImplementationTroubleshooting EIGRP Configuring Serial Encapsulation Troubleshooting Multiarea OSPFImplementing EIGRP for IPv6 Establishing a WAN Connection Using Examining OSPFv3 Multiarea OSPF IPv4 Implementation Frame Relay Managing Cisco DevicesTroubleshooting Multiarea OSPF Introducing VPN Solutions LicensingExamining OSPFv3 Configuring GRE Tunnels Lab 1-2: Troubleshooting Switch MediaManaging Cisco Devices Troubleshooting EIGRP IssuesLicensing Implementing EIGRP for IPv6 Lab 2-1: Performing Initial Router SetupLab 1-2: Troubleshooting Switch Media Multiarea OSPF IPv4 Implementation and Configuration

Page 5: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Issues Troubleshooting Multiarea OSPF Lab 2-2: Connecting to the InternetLab 2-1: Performing Initial Router Setup and Examining OSPFv3 Lab 3-1: Enhancing the Security of theConfiguration Managing Cisco Devices Initial ConfigurationLab 2-2: Connecting to the Internet Licensing Lab 3-2: Device HardeningLab 3-1: Enhancing the Security of the Initial Lab 1-2: Troubleshooting Switch Media Lab 3-3: Filtering Traffic with ACLsConfiguration Issues Lab 4-1: Configure and Verify Basic IPv6Lab 3-2: Device Hardening Lab 2-1: Performing Initial Router Setup Lab 4-2: Configure and Verify StatelessLab 3-3: Filtering Traffic with ACLs and Configuration AutoconfigurationLab 4-1: Configure and Verify Basic IPv6 Lab 2-2: Connecting to the Internet Lab 4-3: Configure and Verify IPv6 RoutingLab 4-2: Configure and Verify Stateless Lab 3-1: Enhancing the Security of the Lab 5-1: Configuring Expanded SwitchedAutoconfiguration Initial Configuration NetworksLab 4-3: Configure and Verify IPv6 Routing Lab 3-2: Device Hardening Lab 5-2: Configuring DHCP ServerLab 5-1: Configuring Expanded Switched Lab 3-3: Filtering Traffic with ACLs Lab 5-3: Troubleshooting VLANs andNetworks Lab 4-1: Configure and Verify Basic IPv6 TrunksLab 5-2: Configuring DHCP Server Lab 4-2: Configure and Verify Stateless Lab 5-4: Optimizing STPLab 5-3: Troubleshooting VLANs and Trunks Autoconfiguration Lab 5-5: Configuring EtherChannelLab 5-4: Optimizing STP Lab 4-3: Configure and Verify IPv6 Lab 6-1: Troubleshooting IP ConnectivityLab 5-5: Configuring EtherChannel Routing Lab 7-1: Configuring and TroubleshootingLab 6-1: Troubleshooting IP Connectivity Lab 5-1: Configuring Expanded Switched a Serial ConnectionLab 7-1: Configuring and Troubleshooting a Networks Lab 7-2: Establishing a Frame Relay WANSerial Connection Lab 5-2: Configuring DHCP Server Lab 7-3: Establishing a GRE TunnelLab 7-2: Establishing a Frame Relay WAN Lab 5-3: Troubleshooting VLANs and Lab 8-1: Implementing EIGRPLab 7-3: Establishing a GRE Tunnel Trunks Lab 8-2: Troubleshooting EIGRPLab 8-1: Implementing EIGRP Lab 5-4: Optimizing STP Lab 8-3: Implementing EIGRP for IPv6Lab 8-2: Troubleshooting EIGRP Lab 5-5: Configuring EtherChannel Lab 9-1: Implementing OSPFLab 8-3: Implementing EIGRP for IPv6 Lab 6-1: Troubleshooting IP Connectivity Lab 9-2: Configuring Multiarea OSPFLab 9-1: Implementing OSPF Lab 7-1: Configuring and Troubleshooting Lab 9-3: Troubleshooting Multiarea OSPFLab 9-2: Configuring Multiarea OSPF a Serial Connection Lab 9-4: Configuring OSPF for IPv6Lab 9-3: Troubleshooting Multiarea OSPF Lab 7-2: Establishing a Frame Relay Lab 10-1: SNMP and Syslog BasicLab 9-4: Configuring OSPF for IPv6 WAN ConfigurationLab 10-1: SNMP and Syslog Basic Lab 7-3: Establishing a GRE Tunnel Lab 10-2: Analyzing NetFlow DataConfiguration Lab 8-1: Implementing EIGRP Lab 10-3: Managing Cisco Devices andLab 10-2: Analyzing NetFlow Data Lab 8-2: Troubleshooting EIGRP LicensingLab 10-3: Managing Cisco Devices and Lab 8-3: Implementing EIGRP for IPv6Licensing Lab 9-1: Implementing OSPF

Lab 9-2: Configuring Multiarea OSPF lineLab 9-3: Troubleshooting Multiarea OSPF Understanding the Host-to-Host

line Lab 9-4: Configuring OSPF for IPv6 Communications ModelUnderstanding the Host-to-Host Lab 10-1: SNMP and Syslog Basic Introducing LANsCommunications Model Configuration Operating Cisco IOS SoftwareIntroducing LANs Lab 10-2: Analyzing NetFlow Data Starting a SwitchOperating Cisco IOS Software Lab 10-3: Managing Cisco Devices and Understanding Ethernet and SwitchStarting a Switch Licensing OperationUnderstanding Ethernet and Switch Troubleshooting Common Switch MediaOperation IssuesTroubleshooting Common Switch Media line Understanding IP Addressing and SubnetsIssues Understanding the Host-to-Host Understanding the TCP/IP Transport LayerUnderstanding IP Addressing and Subnets Communications Model Exploring the Functions of RoutingUnderstanding the TCP/IP Transport Layer Introducing LANs Configuring a Cisco RouterExploring the Functions of Routing Operating Cisco IOS Software Exploring the Packet Delivery ProcessConfiguring a Cisco Router Starting a Switch Enabling Static RoutingExploring the Packet Delivery Process Understanding Ethernet and Switch Managing Traffic Using ACLsEnabling Static Routing Operation Enabling Internet ConnectivityManaging Traffic Using ACLs Troubleshooting Common Switch Media Implementing Device HardeningEnabling Internet Connectivity Issues Implementing Traffic Filtering with ACLs Implementing Device Hardening Understanding IP Addressing and Understanding IPv6Implementing Traffic Filtering with ACLs Subnets Configuring IPv6 RoutingUnderstanding IPv6 Understanding the TCP/IP Transport Routing Between VLANsConfiguring IPv6 Routing Layer Using a Cisco Network Device as a DHCPRouting Between VLANs Exploring the Functions of Routing ServerUsing a Cisco Network Device as a DHCP Configuring a Cisco Router Troubleshooting VLAN ConnectivityServer Exploring the Packet Delivery Process Building Redundant Switched TopologiesTroubleshooting VLAN Connectivity Enabling Static Routing Improving Redundant Switched TopologiesBuilding Redundant Switched Topologies Managing Traffic Using ACLs with EtherChannelImproving Redundant Switched Topologies Enabling Internet Connectivity Understanding Layer 3 Redundancywith EtherChannel Implementing Device Hardening Troubleshooting IPv6 Network Connectivity

Page 6: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Understanding Layer 3 Redundancy Implementing Traffic Filtering with ACLs Configuring Serial EncapsulationTroubleshooting IPv6 Network Connectivity Understanding IPv6 Establishing a WAN Connection UsingConfiguring Serial Encapsulation Configuring IPv6 Routing Frame RelayEstablishing a WAN Connection Using Routing Between VLANs Introducing VPN SolutionsFrame Relay Using a Cisco Network Device as a Configuring GRE Tunnels Introducing VPN Solutions DHCP Server Troubleshooting EIGRPConfiguring GRE Tunnels Troubleshooting VLAN Connectivity Implementing EIGRP for IPv6 Troubleshooting EIGRP Building Redundant Switched Topologies Multiarea OSPF IPv4 ImplementationImplementing EIGRP for IPv6 Improving Redundant Switched Troubleshooting Multiarea OSPFMultiarea OSPF IPv4 Implementation Topologies with EtherChannel Examining OSPFv3 Troubleshooting Multiarea OSPF Understanding Layer 3 Redundancy Managing Cisco DevicesExamining OSPFv3 Troubleshooting IPv6 Network LicensingManaging Cisco Devices Connectivity Lab 1-2: Troubleshooting Switch MediaLicensing Configuring Serial Encapsulation IssuesLab 1-2: Troubleshooting Switch Media Establishing a WAN Connection Using Lab 2-1: Performing Initial Router SetupIssues Frame Relay and ConfigurationLab 2-1: Performing Initial Router Setup and Introducing VPN Solutions Lab 2-2: Connecting to the InternetConfiguration Configuring GRE Tunnels Lab 3-1: Enhancing the Security of theLab 2-2: Connecting to the Internet Troubleshooting EIGRP Initial ConfigurationLab 3-1: Enhancing the Security of the Initial Implementing EIGRP for IPv6 Lab 3-2: Device HardeningConfiguration Multiarea OSPF IPv4 Implementation Lab 3-3: Filtering Traffic with ACLsLab 3-2: Device Hardening Troubleshooting Multiarea OSPF Lab 4-1: Configure and Verify Basic IPv6Lab 3-3: Filtering Traffic with ACLs Examining OSPFv3 Lab 4-2: Configure and Verify StatelessLab 4-1: Configure and Verify Basic IPv6 Managing Cisco Devices AutoconfigurationLab 4-2: Configure and Verify Stateless Licensing Lab 4-3: Configure and Verify IPv6 RoutingAutoconfiguration Lab 1-2: Troubleshooting Switch Media Lab 5-1: Configuring Expanded SwitchedLab 4-3: Configure and Verify IPv6 Routing Issues NetworksLab 5-1: Configuring Expanded Switched Lab 2-1: Performing Initial Router Setup Lab 5-2: Configuring DHCP ServerNetworks and Configuration Lab 5-3: Troubleshooting VLANs andLab 5-2: Configuring DHCP Server Lab 2-2: Connecting to the Internet TrunksLab 5-3: Troubleshooting VLANs and Trunks Lab 3-1: Enhancing the Security of the Lab 5-4: Optimizing STPLab 5-4: Optimizing STP Initial Configuration Lab 5-5: Configuring EtherChannelLab 5-5: Configuring EtherChannel Lab 3-2: Device Hardening Lab 6-1: Troubleshooting IP ConnectivityLab 6-1: Troubleshooting IP Connectivity Lab 3-3: Filtering Traffic with ACLs Lab 7-1: Configuring and TroubleshootingLab 7-1: Configuring and Troubleshooting a Lab 4-1: Configure and Verify Basic IPv6 a Serial ConnectionSerial Connection Lab 4-2: Configure and Verify Stateless Lab 7-2: Establishing a Frame Relay WANLab 7-2: Establishing a Frame Relay WAN Autoconfiguration Lab 7-3: Establishing a GRE TunnelLab 7-3: Establishing a GRE Tunnel Lab 4-3: Configure and Verify IPv6 Lab 8-1: Implementing EIGRPLab 8-1: Implementing EIGRP Routing Lab 8-2: Troubleshooting EIGRPLab 8-2: Troubleshooting EIGRP Lab 5-1: Configuring Expanded Switched Lab 8-3: Implementing EIGRP for IPv6Lab 8-3: Implementing EIGRP for IPv6 Networks Lab 9-1: Implementing OSPFLab 9-1: Implementing OSPF Lab 5-2: Configuring DHCP Server Lab 9-2: Configuring Multiarea OSPFLab 9-2: Configuring Multiarea OSPF Lab 5-3: Troubleshooting VLANs and Lab 9-3: Troubleshooting Multiarea OSPFLab 9-3: Troubleshooting Multiarea OSPF Trunks Lab 9-4: Configuring OSPF for IPv6Lab 9-4: Configuring OSPF for IPv6 Lab 5-4: Optimizing STP Lab 10-1: SNMP and Syslog BasicLab 10-1: SNMP and Syslog Basic Lab 5-5: Configuring EtherChannel ConfigurationConfiguration Lab 6-1: Troubleshooting IP Connectivity Lab 10-2: Analyzing NetFlow DataLab 10-2: Analyzing NetFlow Data Lab 7-1: Configuring and Troubleshooting Lab 10-3: Managing Cisco Devices andLab 10-3: Managing Cisco Devices and a Serial Connection LicensingLicensing Lab 7-2: Establishing a Frame Relay

WANLab 7-3: Establishing a GRE Tunnel line

line Lab 8-1: Implementing EIGRP Understanding the Host-to-HostUnderstanding the Host-to-Host Lab 8-2: Troubleshooting EIGRP Communications ModelCommunications Model Lab 8-3: Implementing EIGRP for IPv6 Introducing LANsIntroducing LANs Lab 9-1: Implementing OSPF Operating Cisco IOS SoftwareOperating Cisco IOS Software Lab 9-2: Configuring Multiarea OSPF Starting a SwitchStarting a Switch Lab 9-3: Troubleshooting Multiarea OSPF Understanding Ethernet and SwitchUnderstanding Ethernet and Switch Lab 9-4: Configuring OSPF for IPv6 OperationOperation Lab 10-1: SNMP and Syslog Basic Troubleshooting Common Switch MediaTroubleshooting Common Switch Media Configuration IssuesIssues Lab 10-2: Analyzing NetFlow Data Understanding IP Addressing and SubnetsUnderstanding IP Addressing and Subnets Lab 10-3: Managing Cisco Devices and Understanding the TCP/IP Transport LayerUnderstanding the TCP/IP Transport Layer Licensing Exploring the Functions of RoutingExploring the Functions of Routing Configuring a Cisco RouterConfiguring a Cisco Router Troubleshooting Basic Connectivity Exploring the Packet Delivery Process

Page 7: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Exploring the Packet Delivery Process line Enabling Static RoutingEnabling Static Routing Troubleshooting IPv4 Network Managing Traffic Using ACLsManaging Traffic Using ACLs Connectivity Enabling Internet ConnectivityEnabling Internet Connectivity Implementing Device HardeningImplementing Device Hardening Implementing Traffic Filtering with ACLs Implementing Traffic Filtering with ACLs line Understanding IPv6Understanding IPv6 Understanding the Host-to-Host Configuring IPv6 RoutingConfiguring IPv6 Routing Communications Model Routing Between VLANsRouting Between VLANs Introducing LANs Using a Cisco Network Device as a DHCPUsing a Cisco Network Device as a DHCP Operating Cisco IOS Software ServerServer Starting a Switch Troubleshooting VLAN ConnectivityTroubleshooting VLAN Connectivity Understanding Ethernet and Switch Building Redundant Switched TopologiesBuilding Redundant Switched Topologies Operation Improving Redundant Switched TopologiesImproving Redundant Switched Topologies Troubleshooting Common Switch Media with EtherChannelwith EtherChannel Issues Understanding Layer 3 RedundancyUnderstanding Layer 3 Redundancy Understanding IP Addressing and Troubleshooting IPv6 Network ConnectivityTroubleshooting IPv6 Network Connectivity Subnets Configuring Serial EncapsulationConfiguring Serial Encapsulation Understanding the TCP/IP Transport Establishing a WAN Connection UsingEstablishing a WAN Connection Using Layer Frame RelayFrame Relay Exploring the Functions of Routing Introducing VPN SolutionsIntroducing VPN Solutions Configuring a Cisco Router Configuring GRE Tunnels Configuring GRE Tunnels Exploring the Packet Delivery Process Troubleshooting EIGRPTroubleshooting EIGRP Enabling Static Routing Implementing EIGRP for IPv6 Implementing EIGRP for IPv6 Managing Traffic Using ACLs Multiarea OSPF IPv4 ImplementationMultiarea OSPF IPv4 Implementation Enabling Internet Connectivity Troubleshooting Multiarea OSPFTroubleshooting Multiarea OSPF Implementing Device Hardening Examining OSPFv3 Examining OSPFv3 Implementing Traffic Filtering with ACLs Managing Cisco DevicesManaging Cisco Devices Understanding IPv6 LicensingLicensing Configuring IPv6 Routing Lab 1-2: Troubleshooting Switch MediaLab 1-2: Troubleshooting Switch Media Routing Between VLANs IssuesIssues Using a Cisco Network Device as a Lab 2-1: Performing Initial Router SetupLab 2-1: Performing Initial Router Setup and DHCP Server and ConfigurationConfiguration Troubleshooting VLAN Connectivity Lab 2-2: Connecting to the InternetLab 2-2: Connecting to the Internet Building Redundant Switched Topologies Lab 3-1: Enhancing the Security of theLab 3-1: Enhancing the Security of the Initial Improving Redundant Switched Initial ConfigurationConfiguration Topologies with EtherChannel Lab 3-2: Device HardeningLab 3-2: Device Hardening Understanding Layer 3 Redundancy Lab 3-3: Filtering Traffic with ACLsLab 3-3: Filtering Traffic with ACLs Troubleshooting IPv6 Network Lab 4-1: Configure and Verify Basic IPv6Lab 4-1: Configure and Verify Basic IPv6 Connectivity Lab 4-2: Configure and Verify StatelessLab 4-2: Configure and Verify Stateless Configuring Serial Encapsulation AutoconfigurationAutoconfiguration Establishing a WAN Connection Using Lab 4-3: Configure and Verify IPv6 RoutingLab 4-3: Configure and Verify IPv6 Routing Frame Relay Lab 5-1: Configuring Expanded SwitchedLab 5-1: Configuring Expanded Switched Introducing VPN Solutions NetworksNetworks Configuring GRE Tunnels Lab 5-2: Configuring DHCP ServerLab 5-2: Configuring DHCP Server Troubleshooting EIGRP Lab 5-3: Troubleshooting VLANs andLab 5-3: Troubleshooting VLANs and Trunks Implementing EIGRP for IPv6 TrunksLab 5-4: Optimizing STP Multiarea OSPF IPv4 Implementation Lab 5-4: Optimizing STPLab 5-5: Configuring EtherChannel Troubleshooting Multiarea OSPF Lab 5-5: Configuring EtherChannelLab 6-1: Troubleshooting IP Connectivity Examining OSPFv3 Lab 6-1: Troubleshooting IP ConnectivityLab 7-1: Configuring and Troubleshooting a Managing Cisco Devices Lab 7-1: Configuring and TroubleshootingSerial Connection Licensing a Serial ConnectionLab 7-2: Establishing a Frame Relay WAN Lab 1-2: Troubleshooting Switch Media Lab 7-2: Establishing a Frame Relay WANLab 7-3: Establishing a GRE Tunnel Issues Lab 7-3: Establishing a GRE TunnelLab 8-1: Implementing EIGRP Lab 2-1: Performing Initial Router Setup Lab 8-1: Implementing EIGRPLab 8-2: Troubleshooting EIGRP and Configuration Lab 8-2: Troubleshooting EIGRPLab 8-3: Implementing EIGRP for IPv6 Lab 2-2: Connecting to the Internet Lab 8-3: Implementing EIGRP for IPv6Lab 9-1: Implementing OSPF Lab 3-1: Enhancing the Security of the Lab 9-1: Implementing OSPFLab 9-2: Configuring Multiarea OSPF Initial Configuration Lab 9-2: Configuring Multiarea OSPFLab 9-3: Troubleshooting Multiarea OSPF Lab 3-2: Device Hardening Lab 9-3: Troubleshooting Multiarea OSPFLab 9-4: Configuring OSPF for IPv6 Lab 3-3: Filtering Traffic with ACLs Lab 9-4: Configuring OSPF for IPv6Lab 10-1: SNMP and Syslog Basic Lab 4-1: Configure and Verify Basic IPv6 Lab 10-1: SNMP and Syslog BasicConfiguration Lab 4-2: Configure and Verify Stateless ConfigurationLab 10-2: Analyzing NetFlow Data Autoconfiguration Lab 10-2: Analyzing NetFlow DataLab 10-3: Managing Cisco Devices and Lab 4-3: Configure and Verify IPv6 Lab 10-3: Managing Cisco Devices andLicensing Routing Licensing

Lab 5-1: Configuring Expanded Switched

Page 8: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Networksline Lab 5-2: Configuring DHCP Server line

Understanding the Host-to-Host Lab 5-3: Troubleshooting VLANs and Understanding the Host-to-HostCommunications Model Trunks Communications ModelIntroducing LANs Lab 5-4: Optimizing STP Introducing LANsOperating Cisco IOS Software Lab 5-5: Configuring EtherChannel Operating Cisco IOS SoftwareStarting a Switch Lab 6-1: Troubleshooting IP Connectivity Starting a SwitchUnderstanding Ethernet and Switch Lab 7-1: Configuring and Troubleshooting Understanding Ethernet and SwitchOperation a Serial Connection OperationTroubleshooting Common Switch Media Lab 7-2: Establishing a Frame Relay Troubleshooting Common Switch MediaIssues WAN IssuesUnderstanding IP Addressing and Subnets Lab 7-3: Establishing a GRE Tunnel Understanding IP Addressing and SubnetsUnderstanding the TCP/IP Transport Layer Lab 8-1: Implementing EIGRP Understanding the TCP/IP Transport LayerExploring the Functions of Routing Lab 8-2: Troubleshooting EIGRP Exploring the Functions of RoutingConfiguring a Cisco Router Lab 8-3: Implementing EIGRP for IPv6 Configuring a Cisco RouterExploring the Packet Delivery Process Lab 9-1: Implementing OSPF Exploring the Packet Delivery ProcessEnabling Static Routing Lab 9-2: Configuring Multiarea OSPF Enabling Static RoutingManaging Traffic Using ACLs Lab 9-3: Troubleshooting Multiarea OSPF Managing Traffic Using ACLsEnabling Internet Connectivity Lab 9-4: Configuring OSPF for IPv6 Enabling Internet ConnectivityImplementing Device Hardening Lab 10-1: SNMP and Syslog Basic Implementing Device HardeningImplementing Traffic Filtering with ACLs Configuration Implementing Traffic Filtering with ACLs Understanding IPv6 Lab 10-2: Analyzing NetFlow Data Understanding IPv6Configuring IPv6 Routing Lab 10-3: Managing Cisco Devices and Configuring IPv6 RoutingRouting Between VLANs Licensing Routing Between VLANsUsing a Cisco Network Device as a DHCP Using a Cisco Network Device as a DHCPServer Wide Area Networks ServerTroubleshooting VLAN Connectivity line Troubleshooting VLAN ConnectivityBuilding Redundant Switched Topologies Understanding WAN Technologies Building Redundant Switched TopologiesImproving Redundant Switched Topologies Improving Redundant Switched Topologieswith EtherChannel with EtherChannelUnderstanding Layer 3 Redundancy line Understanding Layer 3 RedundancyTroubleshooting IPv6 Network Connectivity Understanding the Host-to-Host Troubleshooting IPv6 Network ConnectivityConfiguring Serial Encapsulation Communications Model Configuring Serial EncapsulationEstablishing a WAN Connection Using Introducing LANs Establishing a WAN Connection UsingFrame Relay Operating Cisco IOS Software Frame RelayIntroducing VPN Solutions Starting a Switch Introducing VPN SolutionsConfiguring GRE Tunnels Understanding Ethernet and Switch Configuring GRE Tunnels Troubleshooting EIGRP Operation Troubleshooting EIGRPImplementing EIGRP for IPv6 Troubleshooting Common Switch Media Implementing EIGRP for IPv6 Multiarea OSPF IPv4 Implementation Issues Multiarea OSPF IPv4 ImplementationTroubleshooting Multiarea OSPF Understanding IP Addressing and Troubleshooting Multiarea OSPFExamining OSPFv3 Subnets Examining OSPFv3 Managing Cisco Devices Understanding the TCP/IP Transport Managing Cisco DevicesLicensing Layer LicensingLab 1-2: Troubleshooting Switch Media Exploring the Functions of Routing Lab 1-2: Troubleshooting Switch MediaIssues Configuring a Cisco Router IssuesLab 2-1: Performing Initial Router Setup and Exploring the Packet Delivery Process Lab 2-1: Performing Initial Router SetupConfiguration Enabling Static Routing and ConfigurationLab 2-2: Connecting to the Internet Managing Traffic Using ACLs Lab 2-2: Connecting to the InternetLab 3-1: Enhancing the Security of the Initial Enabling Internet Connectivity Lab 3-1: Enhancing the Security of theConfiguration Implementing Device Hardening Initial ConfigurationLab 3-2: Device Hardening Implementing Traffic Filtering with ACLs Lab 3-2: Device HardeningLab 3-3: Filtering Traffic with ACLs Understanding IPv6 Lab 3-3: Filtering Traffic with ACLsLab 4-1: Configure and Verify Basic IPv6 Configuring IPv6 Routing Lab 4-1: Configure and Verify Basic IPv6Lab 4-2: Configure and Verify Stateless Routing Between VLANs Lab 4-2: Configure and Verify StatelessAutoconfiguration Using a Cisco Network Device as a AutoconfigurationLab 4-3: Configure and Verify IPv6 Routing DHCP Server Lab 4-3: Configure and Verify IPv6 RoutingLab 5-1: Configuring Expanded Switched Troubleshooting VLAN Connectivity Lab 5-1: Configuring Expanded SwitchedNetworks Building Redundant Switched Topologies NetworksLab 5-2: Configuring DHCP Server Improving Redundant Switched Lab 5-2: Configuring DHCP ServerLab 5-3: Troubleshooting VLANs and Trunks Topologies with EtherChannel Lab 5-3: Troubleshooting VLANs andLab 5-4: Optimizing STP Understanding Layer 3 Redundancy TrunksLab 5-5: Configuring EtherChannel Troubleshooting IPv6 Network Lab 5-4: Optimizing STPLab 6-1: Troubleshooting IP Connectivity Connectivity Lab 5-5: Configuring EtherChannelLab 7-1: Configuring and Troubleshooting a Configuring Serial Encapsulation Lab 6-1: Troubleshooting IP ConnectivitySerial Connection Establishing a WAN Connection Using Lab 7-1: Configuring and Troubleshooting

Page 9: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Lab 7-2: Establishing a Frame Relay WAN Frame Relay a Serial ConnectionLab 7-3: Establishing a GRE Tunnel Introducing VPN Solutions Lab 7-2: Establishing a Frame Relay WANLab 8-1: Implementing EIGRP Configuring GRE Tunnels Lab 7-3: Establishing a GRE TunnelLab 8-2: Troubleshooting EIGRP Troubleshooting EIGRP Lab 8-1: Implementing EIGRPLab 8-3: Implementing EIGRP for IPv6 Implementing EIGRP for IPv6 Lab 8-2: Troubleshooting EIGRPLab 9-1: Implementing OSPF Multiarea OSPF IPv4 Implementation Lab 8-3: Implementing EIGRP for IPv6Lab 9-2: Configuring Multiarea OSPF Troubleshooting Multiarea OSPF Lab 9-1: Implementing OSPFLab 9-3: Troubleshooting Multiarea OSPF Examining OSPFv3 Lab 9-2: Configuring Multiarea OSPFLab 9-4: Configuring OSPF for IPv6 Managing Cisco Devices Lab 9-3: Troubleshooting Multiarea OSPFLab 10-1: SNMP and Syslog Basic Licensing Lab 9-4: Configuring OSPF for IPv6Configuration Lab 1-2: Troubleshooting Switch Media Lab 10-1: SNMP and Syslog BasicLab 10-2: Analyzing NetFlow Data Issues ConfigurationLab 10-3: Managing Cisco Devices and Lab 2-1: Performing Initial Router Setup Lab 10-2: Analyzing NetFlow DataLicensing and Configuration Lab 10-3: Managing Cisco Devices and

Lab 2-2: Connecting to the Internet LicensingLab 3-1: Enhancing the Security of the

line Initial ConfigurationUnderstanding the Host-to-Host Lab 3-2: Device Hardening lineCommunications Model Lab 3-3: Filtering Traffic with ACLs Understanding the Host-to-HostIntroducing LANs Lab 4-1: Configure and Verify Basic IPv6 Communications ModelOperating Cisco IOS Software Lab 4-2: Configure and Verify Stateless Introducing LANsStarting a Switch Autoconfiguration Operating Cisco IOS SoftwareUnderstanding Ethernet and Switch Lab 4-3: Configure and Verify IPv6 Starting a SwitchOperation Routing Understanding Ethernet and SwitchTroubleshooting Common Switch Media Lab 5-1: Configuring Expanded Switched OperationIssues Networks Troubleshooting Common Switch MediaUnderstanding IP Addressing and Subnets Lab 5-2: Configuring DHCP Server IssuesUnderstanding the TCP/IP Transport Layer Lab 5-3: Troubleshooting VLANs and Understanding IP Addressing and SubnetsExploring the Functions of Routing Trunks Understanding the TCP/IP Transport LayerConfiguring a Cisco Router Lab 5-4: Optimizing STP Exploring the Functions of RoutingExploring the Packet Delivery Process Lab 5-5: Configuring EtherChannel Configuring a Cisco RouterEnabling Static Routing Lab 6-1: Troubleshooting IP Connectivity Exploring the Packet Delivery ProcessManaging Traffic Using ACLs Lab 7-1: Configuring and Troubleshooting Enabling Static RoutingEnabling Internet Connectivity a Serial Connection Managing Traffic Using ACLsImplementing Device Hardening Lab 7-2: Establishing a Frame Relay Enabling Internet ConnectivityImplementing Traffic Filtering with ACLs WAN Implementing Device HardeningUnderstanding IPv6 Lab 7-3: Establishing a GRE Tunnel Implementing Traffic Filtering with ACLs Configuring IPv6 Routing Lab 8-1: Implementing EIGRP Understanding IPv6Routing Between VLANs Lab 8-2: Troubleshooting EIGRP Configuring IPv6 RoutingUsing a Cisco Network Device as a DHCP Lab 8-3: Implementing EIGRP for IPv6 Routing Between VLANsServer Lab 9-1: Implementing OSPF Using a Cisco Network Device as a DHCPTroubleshooting VLAN Connectivity Lab 9-2: Configuring Multiarea OSPF ServerBuilding Redundant Switched Topologies Lab 9-3: Troubleshooting Multiarea OSPF Troubleshooting VLAN ConnectivityImproving Redundant Switched Topologies Lab 9-4: Configuring OSPF for IPv6 Building Redundant Switched Topologieswith EtherChannel Lab 10-1: SNMP and Syslog Basic Improving Redundant Switched TopologiesUnderstanding Layer 3 Redundancy Configuration with EtherChannelTroubleshooting IPv6 Network Connectivity Lab 10-2: Analyzing NetFlow Data Understanding Layer 3 RedundancyConfiguring Serial Encapsulation Lab 10-3: Managing Cisco Devices and Troubleshooting IPv6 Network ConnectivityEstablishing a WAN Connection Using Licensing Configuring Serial EncapsulationFrame Relay Establishing a WAN Connection UsingIntroducing VPN Solutions Frame RelayConfiguring GRE Tunnels line Introducing VPN SolutionsTroubleshooting EIGRP Understanding the Host-to-Host Configuring GRE Tunnels Implementing EIGRP for IPv6 Communications Model Troubleshooting EIGRPMultiarea OSPF IPv4 Implementation Introducing LANs Implementing EIGRP for IPv6 Troubleshooting Multiarea OSPF Operating Cisco IOS Software Multiarea OSPF IPv4 ImplementationExamining OSPFv3 Starting a Switch Troubleshooting Multiarea OSPFManaging Cisco Devices Understanding Ethernet and Switch Examining OSPFv3 Licensing Operation Managing Cisco DevicesLab 1-2: Troubleshooting Switch Media Troubleshooting Common Switch Media LicensingIssues Issues Lab 1-2: Troubleshooting Switch MediaLab 2-1: Performing Initial Router Setup and Understanding IP Addressing and IssuesConfiguration Subnets Lab 2-1: Performing Initial Router SetupLab 2-2: Connecting to the Internet Understanding the TCP/IP Transport and ConfigurationLab 3-1: Enhancing the Security of the Initial Layer Lab 2-2: Connecting to the InternetConfiguration Exploring the Functions of Routing Lab 3-1: Enhancing the Security of the

Page 10: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Lab 3-2: Device Hardening Configuring a Cisco Router Initial ConfigurationLab 3-3: Filtering Traffic with ACLs Exploring the Packet Delivery Process Lab 3-2: Device HardeningLab 4-1: Configure and Verify Basic IPv6 Enabling Static Routing Lab 3-3: Filtering Traffic with ACLsLab 4-2: Configure and Verify Stateless Managing Traffic Using ACLs Lab 4-1: Configure and Verify Basic IPv6Autoconfiguration Enabling Internet Connectivity Lab 4-2: Configure and Verify StatelessLab 4-3: Configure and Verify IPv6 Routing Implementing Device Hardening AutoconfigurationLab 5-1: Configuring Expanded Switched Implementing Traffic Filtering with ACLs Lab 4-3: Configure and Verify IPv6 RoutingNetworks Understanding IPv6 Lab 5-1: Configuring Expanded SwitchedLab 5-2: Configuring DHCP Server Configuring IPv6 Routing NetworksLab 5-3: Troubleshooting VLANs and Trunks Routing Between VLANs Lab 5-2: Configuring DHCP ServerLab 5-4: Optimizing STP Using a Cisco Network Device as a Lab 5-3: Troubleshooting VLANs andLab 5-5: Configuring EtherChannel DHCP Server TrunksLab 6-1: Troubleshooting IP Connectivity Troubleshooting VLAN Connectivity Lab 5-4: Optimizing STPLab 7-1: Configuring and Troubleshooting a Building Redundant Switched Topologies Lab 5-5: Configuring EtherChannelSerial Connection Improving Redundant Switched Lab 6-1: Troubleshooting IP ConnectivityLab 7-2: Establishing a Frame Relay WAN Topologies with EtherChannel Lab 7-1: Configuring and TroubleshootingLab 7-3: Establishing a GRE Tunnel Understanding Layer 3 Redundancy a Serial ConnectionLab 8-1: Implementing EIGRP Troubleshooting IPv6 Network Lab 7-2: Establishing a Frame Relay WANLab 8-2: Troubleshooting EIGRP Connectivity Lab 7-3: Establishing a GRE TunnelLab 8-3: Implementing EIGRP for IPv6 Configuring Serial Encapsulation Lab 8-1: Implementing EIGRPLab 9-1: Implementing OSPF Establishing a WAN Connection Using Lab 8-2: Troubleshooting EIGRPLab 9-2: Configuring Multiarea OSPF Frame Relay Lab 8-3: Implementing EIGRP for IPv6Lab 9-3: Troubleshooting Multiarea OSPF Introducing VPN Solutions Lab 9-1: Implementing OSPFLab 9-4: Configuring OSPF for IPv6 Configuring GRE Tunnels Lab 9-2: Configuring Multiarea OSPFLab 10-1: SNMP and Syslog Basic Troubleshooting EIGRP Lab 9-3: Troubleshooting Multiarea OSPFConfiguration Implementing EIGRP for IPv6 Lab 9-4: Configuring OSPF for IPv6Lab 10-2: Analyzing NetFlow Data Multiarea OSPF IPv4 Implementation Lab 10-1: SNMP and Syslog BasicLab 10-3: Managing Cisco Devices and Troubleshooting Multiarea OSPF ConfigurationLicensing Examining OSPFv3 Lab 10-2: Analyzing NetFlow Data

Managing Cisco Devices Lab 10-3: Managing Cisco Devices andEstablishing Internet Connectivity Licensing Licensingline Lab 1-2: Troubleshooting Switch Media

Understanding the TCP/IP Internet Layer IssuesLab 2-1: Performing Initial Router Setup lineand Configuration Understanding the Host-to-Host

line Lab 2-2: Connecting to the Internet Communications ModelUnderstanding the Host-to-Host Lab 3-1: Enhancing the Security of the Introducing LANsCommunications Model Initial Configuration Operating Cisco IOS SoftwareIntroducing LANs Lab 3-2: Device Hardening Starting a SwitchOperating Cisco IOS Software Lab 3-3: Filtering Traffic with ACLs Understanding Ethernet and SwitchStarting a Switch Lab 4-1: Configure and Verify Basic IPv6 OperationUnderstanding Ethernet and Switch Lab 4-2: Configure and Verify Stateless Troubleshooting Common Switch MediaOperation Autoconfiguration IssuesTroubleshooting Common Switch Media Lab 4-3: Configure and Verify IPv6 Understanding IP Addressing and SubnetsIssues Routing Understanding the TCP/IP Transport LayerUnderstanding IP Addressing and Subnets Lab 5-1: Configuring Expanded Switched Exploring the Functions of RoutingUnderstanding the TCP/IP Transport Layer Networks Configuring a Cisco RouterExploring the Functions of Routing Lab 5-2: Configuring DHCP Server Exploring the Packet Delivery ProcessConfiguring a Cisco Router Lab 5-3: Troubleshooting VLANs and Enabling Static RoutingExploring the Packet Delivery Process Trunks Managing Traffic Using ACLsEnabling Static Routing Lab 5-4: Optimizing STP Enabling Internet ConnectivityManaging Traffic Using ACLs Lab 5-5: Configuring EtherChannel Implementing Device HardeningEnabling Internet Connectivity Lab 6-1: Troubleshooting IP Connectivity Implementing Traffic Filtering with ACLs Implementing Device Hardening Lab 7-1: Configuring and Troubleshooting Understanding IPv6Implementing Traffic Filtering with ACLs a Serial Connection Configuring IPv6 RoutingUnderstanding IPv6 Lab 7-2: Establishing a Frame Relay Routing Between VLANsConfiguring IPv6 Routing WAN Using a Cisco Network Device as a DHCPRouting Between VLANs Lab 7-3: Establishing a GRE Tunnel ServerUsing a Cisco Network Device as a DHCP Lab 8-1: Implementing EIGRP Troubleshooting VLAN ConnectivityServer Lab 8-2: Troubleshooting EIGRP Building Redundant Switched TopologiesTroubleshooting VLAN Connectivity Lab 8-3: Implementing EIGRP for IPv6 Improving Redundant Switched TopologiesBuilding Redundant Switched Topologies Lab 9-1: Implementing OSPF with EtherChannelImproving Redundant Switched Topologies Lab 9-2: Configuring Multiarea OSPF Understanding Layer 3 Redundancywith EtherChannel Lab 9-3: Troubleshooting Multiarea OSPF Troubleshooting IPv6 Network ConnectivityUnderstanding Layer 3 Redundancy Lab 9-4: Configuring OSPF for IPv6 Configuring Serial EncapsulationTroubleshooting IPv6 Network Connectivity Lab 10-1: SNMP and Syslog Basic Establishing a WAN Connection Using

Page 11: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Configuring Serial Encapsulation Configuration Frame RelayEstablishing a WAN Connection Using Lab 10-2: Analyzing NetFlow Data Introducing VPN SolutionsFrame Relay Lab 10-3: Managing Cisco Devices and Configuring GRE Tunnels Introducing VPN Solutions Licensing Troubleshooting EIGRPConfiguring GRE Tunnels Implementing EIGRP for IPv6 Troubleshooting EIGRP Multiarea OSPF IPv4 ImplementationImplementing EIGRP for IPv6 line Troubleshooting Multiarea OSPFMultiarea OSPF IPv4 Implementation Understanding the Host-to-Host Examining OSPFv3 Troubleshooting Multiarea OSPF Communications Model Managing Cisco DevicesExamining OSPFv3 Introducing LANs LicensingManaging Cisco Devices Operating Cisco IOS Software Lab 1-2: Troubleshooting Switch MediaLicensing Starting a Switch IssuesLab 1-2: Troubleshooting Switch Media Understanding Ethernet and Switch Lab 2-1: Performing Initial Router SetupIssues Operation and ConfigurationLab 2-1: Performing Initial Router Setup and Troubleshooting Common Switch Media Lab 2-2: Connecting to the InternetConfiguration Issues Lab 3-1: Enhancing the Security of theLab 2-2: Connecting to the Internet Understanding IP Addressing and Initial ConfigurationLab 3-1: Enhancing the Security of the Initial Subnets Lab 3-2: Device HardeningConfiguration Understanding the TCP/IP Transport Lab 3-3: Filtering Traffic with ACLsLab 3-2: Device Hardening Layer Lab 4-1: Configure and Verify Basic IPv6Lab 3-3: Filtering Traffic with ACLs Exploring the Functions of Routing Lab 4-2: Configure and Verify StatelessLab 4-1: Configure and Verify Basic IPv6 Configuring a Cisco Router AutoconfigurationLab 4-2: Configure and Verify Stateless Exploring the Packet Delivery Process Lab 4-3: Configure and Verify IPv6 RoutingAutoconfiguration Enabling Static Routing Lab 5-1: Configuring Expanded SwitchedLab 4-3: Configure and Verify IPv6 Routing Managing Traffic Using ACLs NetworksLab 5-1: Configuring Expanded Switched Enabling Internet Connectivity Lab 5-2: Configuring DHCP ServerNetworks Implementing Device Hardening Lab 5-3: Troubleshooting VLANs andLab 5-2: Configuring DHCP Server Implementing Traffic Filtering with ACLs TrunksLab 5-3: Troubleshooting VLANs and Trunks Understanding IPv6 Lab 5-4: Optimizing STPLab 5-4: Optimizing STP Configuring IPv6 Routing Lab 5-5: Configuring EtherChannelLab 5-5: Configuring EtherChannel Routing Between VLANs Lab 6-1: Troubleshooting IP ConnectivityLab 6-1: Troubleshooting IP Connectivity Using a Cisco Network Device as a Lab 7-1: Configuring and TroubleshootingLab 7-1: Configuring and Troubleshooting a DHCP Server a Serial ConnectionSerial Connection Troubleshooting VLAN Connectivity Lab 7-2: Establishing a Frame Relay WANLab 7-2: Establishing a Frame Relay WAN Building Redundant Switched Topologies Lab 7-3: Establishing a GRE TunnelLab 7-3: Establishing a GRE Tunnel Improving Redundant Switched Lab 8-1: Implementing EIGRPLab 8-1: Implementing EIGRP Topologies with EtherChannel Lab 8-2: Troubleshooting EIGRPLab 8-2: Troubleshooting EIGRP Understanding Layer 3 Redundancy Lab 8-3: Implementing EIGRP for IPv6Lab 8-3: Implementing EIGRP for IPv6 Troubleshooting IPv6 Network Lab 9-1: Implementing OSPFLab 9-1: Implementing OSPF Connectivity Lab 9-2: Configuring Multiarea OSPFLab 9-2: Configuring Multiarea OSPF Configuring Serial Encapsulation Lab 9-3: Troubleshooting Multiarea OSPFLab 9-3: Troubleshooting Multiarea OSPF Establishing a WAN Connection Using Lab 9-4: Configuring OSPF for IPv6Lab 9-4: Configuring OSPF for IPv6 Frame Relay Lab 10-1: SNMP and Syslog BasicLab 10-1: SNMP and Syslog Basic Introducing VPN Solutions ConfigurationConfiguration Configuring GRE Tunnels Lab 10-2: Analyzing NetFlow DataLab 10-2: Analyzing NetFlow Data Troubleshooting EIGRP Lab 10-3: Managing Cisco Devices andLab 10-3: Managing Cisco Devices and Implementing EIGRP for IPv6 LicensingLicensing Multiarea OSPF IPv4 Implementation

Troubleshooting Multiarea OSPFExamining OSPFv3 line

line Managing Cisco Devices Understanding the Host-to-HostUnderstanding the Host-to-Host Licensing Communications ModelCommunications Model Lab 1-2: Troubleshooting Switch Media Introducing LANsIntroducing LANs Issues Operating Cisco IOS SoftwareOperating Cisco IOS Software Lab 2-1: Performing Initial Router Setup Starting a SwitchStarting a Switch and Configuration Understanding Ethernet and SwitchUnderstanding Ethernet and Switch Lab 2-2: Connecting to the Internet OperationOperation Lab 3-1: Enhancing the Security of the Troubleshooting Common Switch MediaTroubleshooting Common Switch Media Initial Configuration IssuesIssues Lab 3-2: Device Hardening Understanding IP Addressing and SubnetsUnderstanding IP Addressing and Subnets Lab 3-3: Filtering Traffic with ACLs Understanding the TCP/IP Transport LayerUnderstanding the TCP/IP Transport Layer Lab 4-1: Configure and Verify Basic IPv6 Exploring the Functions of RoutingExploring the Functions of Routing Lab 4-2: Configure and Verify Stateless Configuring a Cisco RouterConfiguring a Cisco Router Autoconfiguration Exploring the Packet Delivery ProcessExploring the Packet Delivery Process Lab 4-3: Configure and Verify IPv6 Enabling Static RoutingEnabling Static Routing Routing Managing Traffic Using ACLs

Page 12: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Managing Traffic Using ACLs Lab 5-1: Configuring Expanded Switched Enabling Internet ConnectivityEnabling Internet Connectivity Networks Implementing Device HardeningImplementing Device Hardening Lab 5-2: Configuring DHCP Server Implementing Traffic Filtering with ACLs Implementing Traffic Filtering with ACLs Lab 5-3: Troubleshooting VLANs and Understanding IPv6Understanding IPv6 Trunks Configuring IPv6 RoutingConfiguring IPv6 Routing Lab 5-4: Optimizing STP Routing Between VLANsRouting Between VLANs Lab 5-5: Configuring EtherChannel Using a Cisco Network Device as a DHCPUsing a Cisco Network Device as a DHCP Lab 6-1: Troubleshooting IP Connectivity ServerServer Lab 7-1: Configuring and Troubleshooting Troubleshooting VLAN ConnectivityTroubleshooting VLAN Connectivity a Serial Connection Building Redundant Switched TopologiesBuilding Redundant Switched Topologies Lab 7-2: Establishing a Frame Relay Improving Redundant Switched TopologiesImproving Redundant Switched Topologies WAN with EtherChannelwith EtherChannel Lab 7-3: Establishing a GRE Tunnel Understanding Layer 3 RedundancyUnderstanding Layer 3 Redundancy Lab 8-1: Implementing EIGRP Troubleshooting IPv6 Network ConnectivityTroubleshooting IPv6 Network Connectivity Lab 8-2: Troubleshooting EIGRP Configuring Serial EncapsulationConfiguring Serial Encapsulation Lab 8-3: Implementing EIGRP for IPv6 Establishing a WAN Connection UsingEstablishing a WAN Connection Using Lab 9-1: Implementing OSPF Frame RelayFrame Relay Lab 9-2: Configuring Multiarea OSPF Introducing VPN SolutionsIntroducing VPN Solutions Lab 9-3: Troubleshooting Multiarea OSPF Configuring GRE Tunnels Configuring GRE Tunnels Lab 9-4: Configuring OSPF for IPv6 Troubleshooting EIGRPTroubleshooting EIGRP Lab 10-1: SNMP and Syslog Basic Implementing EIGRP for IPv6 Implementing EIGRP for IPv6 Configuration Multiarea OSPF IPv4 ImplementationMultiarea OSPF IPv4 Implementation Lab 10-2: Analyzing NetFlow Data Troubleshooting Multiarea OSPFTroubleshooting Multiarea OSPF Lab 10-3: Managing Cisco Devices and Examining OSPFv3 Examining OSPFv3 Licensing Managing Cisco DevicesManaging Cisco Devices LicensingLicensing Lab 1-2: Troubleshooting Switch MediaLab 1-2: Troubleshooting Switch Media line IssuesIssues Understanding the Host-to-Host Lab 2-1: Performing Initial Router SetupLab 2-1: Performing Initial Router Setup and Communications Model and ConfigurationConfiguration Introducing LANs Lab 2-2: Connecting to the InternetLab 2-2: Connecting to the Internet Operating Cisco IOS Software Lab 3-1: Enhancing the Security of theLab 3-1: Enhancing the Security of the Initial Starting a Switch Initial ConfigurationConfiguration Understanding Ethernet and Switch Lab 3-2: Device HardeningLab 3-2: Device Hardening Operation Lab 3-3: Filtering Traffic with ACLsLab 3-3: Filtering Traffic with ACLs Troubleshooting Common Switch Media Lab 4-1: Configure and Verify Basic IPv6Lab 4-1: Configure and Verify Basic IPv6 Issues Lab 4-2: Configure and Verify StatelessLab 4-2: Configure and Verify Stateless Understanding IP Addressing and AutoconfigurationAutoconfiguration Subnets Lab 4-3: Configure and Verify IPv6 RoutingLab 4-3: Configure and Verify IPv6 Routing Understanding the TCP/IP Transport Lab 5-1: Configuring Expanded SwitchedLab 5-1: Configuring Expanded Switched Layer NetworksNetworks Exploring the Functions of Routing Lab 5-2: Configuring DHCP ServerLab 5-2: Configuring DHCP Server Configuring a Cisco Router Lab 5-3: Troubleshooting VLANs andLab 5-3: Troubleshooting VLANs and Trunks Exploring the Packet Delivery Process TrunksLab 5-4: Optimizing STP Enabling Static Routing Lab 5-4: Optimizing STPLab 5-5: Configuring EtherChannel Managing Traffic Using ACLs Lab 5-5: Configuring EtherChannelLab 6-1: Troubleshooting IP Connectivity Enabling Internet Connectivity Lab 6-1: Troubleshooting IP ConnectivityLab 7-1: Configuring and Troubleshooting a Implementing Device Hardening Lab 7-1: Configuring and TroubleshootingSerial Connection Implementing Traffic Filtering with ACLs a Serial ConnectionLab 7-2: Establishing a Frame Relay WAN Understanding IPv6 Lab 7-2: Establishing a Frame Relay WANLab 7-3: Establishing a GRE Tunnel Configuring IPv6 Routing Lab 7-3: Establishing a GRE TunnelLab 8-1: Implementing EIGRP Routing Between VLANs Lab 8-1: Implementing EIGRPLab 8-2: Troubleshooting EIGRP Using a Cisco Network Device as a Lab 8-2: Troubleshooting EIGRPLab 8-3: Implementing EIGRP for IPv6 DHCP Server Lab 8-3: Implementing EIGRP for IPv6Lab 9-1: Implementing OSPF Troubleshooting VLAN Connectivity Lab 9-1: Implementing OSPFLab 9-2: Configuring Multiarea OSPF Building Redundant Switched Topologies Lab 9-2: Configuring Multiarea OSPFLab 9-3: Troubleshooting Multiarea OSPF Improving Redundant Switched Lab 9-3: Troubleshooting Multiarea OSPFLab 9-4: Configuring OSPF for IPv6 Topologies with EtherChannel Lab 9-4: Configuring OSPF for IPv6Lab 10-1: SNMP and Syslog Basic Understanding Layer 3 Redundancy Lab 10-1: SNMP and Syslog BasicConfiguration Troubleshooting IPv6 Network ConfigurationLab 10-2: Analyzing NetFlow Data Connectivity Lab 10-2: Analyzing NetFlow DataLab 10-3: Managing Cisco Devices and Configuring Serial Encapsulation Lab 10-3: Managing Cisco Devices andLicensing Establishing a WAN Connection Using Licensing

Frame RelayIntroducing VPN Solutions

line Configuring GRE Tunnels line

Page 13: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Understanding the Host-to-Host Troubleshooting EIGRP Understanding the Host-to-HostCommunications Model Implementing EIGRP for IPv6 Communications ModelIntroducing LANs Multiarea OSPF IPv4 Implementation Introducing LANsOperating Cisco IOS Software Troubleshooting Multiarea OSPF Operating Cisco IOS SoftwareStarting a Switch Examining OSPFv3 Starting a SwitchUnderstanding Ethernet and Switch Managing Cisco Devices Understanding Ethernet and SwitchOperation Licensing OperationTroubleshooting Common Switch Media Lab 1-2: Troubleshooting Switch Media Troubleshooting Common Switch MediaIssues Issues IssuesUnderstanding IP Addressing and Subnets Lab 2-1: Performing Initial Router Setup Understanding IP Addressing and SubnetsUnderstanding the TCP/IP Transport Layer and Configuration Understanding the TCP/IP Transport LayerExploring the Functions of Routing Lab 2-2: Connecting to the Internet Exploring the Functions of RoutingConfiguring a Cisco Router Lab 3-1: Enhancing the Security of the Configuring a Cisco RouterExploring the Packet Delivery Process Initial Configuration Exploring the Packet Delivery ProcessEnabling Static Routing Lab 3-2: Device Hardening Enabling Static RoutingManaging Traffic Using ACLs Lab 3-3: Filtering Traffic with ACLs Managing Traffic Using ACLsEnabling Internet Connectivity Lab 4-1: Configure and Verify Basic IPv6 Enabling Internet ConnectivityImplementing Device Hardening Lab 4-2: Configure and Verify Stateless Implementing Device HardeningImplementing Traffic Filtering with ACLs Autoconfiguration Implementing Traffic Filtering with ACLs Understanding IPv6 Lab 4-3: Configure and Verify IPv6 Understanding IPv6Configuring IPv6 Routing Routing Configuring IPv6 RoutingRouting Between VLANs Lab 5-1: Configuring Expanded Switched Routing Between VLANsUsing a Cisco Network Device as a DHCP Networks Using a Cisco Network Device as a DHCPServer Lab 5-2: Configuring DHCP Server ServerTroubleshooting VLAN Connectivity Lab 5-3: Troubleshooting VLANs and Troubleshooting VLAN ConnectivityBuilding Redundant Switched Topologies Trunks Building Redundant Switched TopologiesImproving Redundant Switched Topologies Lab 5-4: Optimizing STP Improving Redundant Switched Topologieswith EtherChannel Lab 5-5: Configuring EtherChannel with EtherChannelUnderstanding Layer 3 Redundancy Lab 6-1: Troubleshooting IP Connectivity Understanding Layer 3 RedundancyTroubleshooting IPv6 Network Connectivity Lab 7-1: Configuring and Troubleshooting Troubleshooting IPv6 Network ConnectivityConfiguring Serial Encapsulation a Serial Connection Configuring Serial EncapsulationEstablishing a WAN Connection Using Lab 7-2: Establishing a Frame Relay Establishing a WAN Connection UsingFrame Relay WAN Frame RelayIntroducing VPN Solutions Lab 7-3: Establishing a GRE Tunnel Introducing VPN SolutionsConfiguring GRE Tunnels Lab 8-1: Implementing EIGRP Configuring GRE Tunnels Troubleshooting EIGRP Lab 8-2: Troubleshooting EIGRP Troubleshooting EIGRPImplementing EIGRP for IPv6 Lab 8-3: Implementing EIGRP for IPv6 Implementing EIGRP for IPv6 Multiarea OSPF IPv4 Implementation Lab 9-1: Implementing OSPF Multiarea OSPF IPv4 ImplementationTroubleshooting Multiarea OSPF Lab 9-2: Configuring Multiarea OSPF Troubleshooting Multiarea OSPFExamining OSPFv3 Lab 9-3: Troubleshooting Multiarea OSPF Examining OSPFv3 Managing Cisco Devices Lab 9-4: Configuring OSPF for IPv6 Managing Cisco DevicesLicensing Lab 10-1: SNMP and Syslog Basic LicensingLab 1-2: Troubleshooting Switch Media Configuration Lab 1-2: Troubleshooting Switch MediaIssues Lab 10-2: Analyzing NetFlow Data IssuesLab 2-1: Performing Initial Router Setup and Lab 10-3: Managing Cisco Devices and Lab 2-1: Performing Initial Router SetupConfiguration Licensing and ConfigurationLab 2-2: Connecting to the Internet Lab 2-2: Connecting to the InternetLab 3-1: Enhancing the Security of the Initial Implementing an EIGRP-Based Solution Lab 3-1: Enhancing the Security of theConfiguration line Initial ConfigurationLab 3-2: Device Hardening Implementing EIGRP Lab 3-2: Device HardeningLab 3-3: Filtering Traffic with ACLs Lab 3-3: Filtering Traffic with ACLsLab 4-1: Configure and Verify Basic IPv6 Lab 4-1: Configure and Verify Basic IPv6Lab 4-2: Configure and Verify Stateless line Lab 4-2: Configure and Verify StatelessAutoconfiguration Understanding the Host-to-Host AutoconfigurationLab 4-3: Configure and Verify IPv6 Routing Communications Model Lab 4-3: Configure and Verify IPv6 RoutingLab 5-1: Configuring Expanded Switched Introducing LANs Lab 5-1: Configuring Expanded SwitchedNetworks Operating Cisco IOS Software NetworksLab 5-2: Configuring DHCP Server Starting a Switch Lab 5-2: Configuring DHCP ServerLab 5-3: Troubleshooting VLANs and Trunks Understanding Ethernet and Switch Lab 5-3: Troubleshooting VLANs andLab 5-4: Optimizing STP Operation TrunksLab 5-5: Configuring EtherChannel Troubleshooting Common Switch Media Lab 5-4: Optimizing STPLab 6-1: Troubleshooting IP Connectivity Issues Lab 5-5: Configuring EtherChannelLab 7-1: Configuring and Troubleshooting a Understanding IP Addressing and Lab 6-1: Troubleshooting IP ConnectivitySerial Connection Subnets Lab 7-1: Configuring and TroubleshootingLab 7-2: Establishing a Frame Relay WAN Understanding the TCP/IP Transport a Serial ConnectionLab 7-3: Establishing a GRE Tunnel Layer Lab 7-2: Establishing a Frame Relay WAN

Page 14: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Lab 8-1: Implementing EIGRP Exploring the Functions of Routing Lab 7-3: Establishing a GRE TunnelLab 8-2: Troubleshooting EIGRP Configuring a Cisco Router Lab 8-1: Implementing EIGRPLab 8-3: Implementing EIGRP for IPv6 Exploring the Packet Delivery Process Lab 8-2: Troubleshooting EIGRPLab 9-1: Implementing OSPF Enabling Static Routing Lab 8-3: Implementing EIGRP for IPv6Lab 9-2: Configuring Multiarea OSPF Managing Traffic Using ACLs Lab 9-1: Implementing OSPFLab 9-3: Troubleshooting Multiarea OSPF Enabling Internet Connectivity Lab 9-2: Configuring Multiarea OSPFLab 9-4: Configuring OSPF for IPv6 Implementing Device Hardening Lab 9-3: Troubleshooting Multiarea OSPFLab 10-1: SNMP and Syslog Basic Implementing Traffic Filtering with ACLs Lab 9-4: Configuring OSPF for IPv6Configuration Understanding IPv6 Lab 10-1: SNMP and Syslog BasicLab 10-2: Analyzing NetFlow Data Configuring IPv6 Routing ConfigurationLab 10-3: Managing Cisco Devices and Routing Between VLANs Lab 10-2: Analyzing NetFlow DataLicensing Using a Cisco Network Device as a Lab 10-3: Managing Cisco Devices and

DHCP Server LicensingTroubleshooting VLAN Connectivity

line Building Redundant Switched TopologiesUnderstanding the Host-to-Host Improving Redundant Switched lineCommunications Model Topologies with EtherChannel Understanding the Host-to-HostIntroducing LANs Understanding Layer 3 Redundancy Communications ModelOperating Cisco IOS Software Troubleshooting IPv6 Network Introducing LANsStarting a Switch Connectivity Operating Cisco IOS SoftwareUnderstanding Ethernet and Switch Configuring Serial Encapsulation Starting a SwitchOperation Establishing a WAN Connection Using Understanding Ethernet and SwitchTroubleshooting Common Switch Media Frame Relay OperationIssues Introducing VPN Solutions Troubleshooting Common Switch MediaUnderstanding IP Addressing and Subnets Configuring GRE Tunnels IssuesUnderstanding the TCP/IP Transport Layer Troubleshooting EIGRP Understanding IP Addressing and SubnetsExploring the Functions of Routing Implementing EIGRP for IPv6 Understanding the TCP/IP Transport LayerConfiguring a Cisco Router Multiarea OSPF IPv4 Implementation Exploring the Functions of RoutingExploring the Packet Delivery Process Troubleshooting Multiarea OSPF Configuring a Cisco RouterEnabling Static Routing Examining OSPFv3 Exploring the Packet Delivery ProcessManaging Traffic Using ACLs Managing Cisco Devices Enabling Static RoutingEnabling Internet Connectivity Licensing Managing Traffic Using ACLsImplementing Device Hardening Lab 1-2: Troubleshooting Switch Media Enabling Internet ConnectivityImplementing Traffic Filtering with ACLs Issues Implementing Device HardeningUnderstanding IPv6 Lab 2-1: Performing Initial Router Setup Implementing Traffic Filtering with ACLs Configuring IPv6 Routing and Configuration Understanding IPv6Routing Between VLANs Lab 2-2: Connecting to the Internet Configuring IPv6 RoutingUsing a Cisco Network Device as a DHCP Lab 3-1: Enhancing the Security of the Routing Between VLANsServer Initial Configuration Using a Cisco Network Device as a DHCPTroubleshooting VLAN Connectivity Lab 3-2: Device Hardening ServerBuilding Redundant Switched Topologies Lab 3-3: Filtering Traffic with ACLs Troubleshooting VLAN ConnectivityImproving Redundant Switched Topologies Lab 4-1: Configure and Verify Basic IPv6 Building Redundant Switched Topologieswith EtherChannel Lab 4-2: Configure and Verify Stateless Improving Redundant Switched TopologiesUnderstanding Layer 3 Redundancy Autoconfiguration with EtherChannelTroubleshooting IPv6 Network Connectivity Lab 4-3: Configure and Verify IPv6 Understanding Layer 3 RedundancyConfiguring Serial Encapsulation Routing Troubleshooting IPv6 Network ConnectivityEstablishing a WAN Connection Using Lab 5-1: Configuring Expanded Switched Configuring Serial EncapsulationFrame Relay Networks Establishing a WAN Connection UsingIntroducing VPN Solutions Lab 5-2: Configuring DHCP Server Frame RelayConfiguring GRE Tunnels Lab 5-3: Troubleshooting VLANs and Introducing VPN SolutionsTroubleshooting EIGRP Trunks Configuring GRE Tunnels Implementing EIGRP for IPv6 Lab 5-4: Optimizing STP Troubleshooting EIGRPMultiarea OSPF IPv4 Implementation Lab 5-5: Configuring EtherChannel Implementing EIGRP for IPv6 Troubleshooting Multiarea OSPF Lab 6-1: Troubleshooting IP Connectivity Multiarea OSPF IPv4 ImplementationExamining OSPFv3 Lab 7-1: Configuring and Troubleshooting Troubleshooting Multiarea OSPFManaging Cisco Devices a Serial Connection Examining OSPFv3 Licensing Lab 7-2: Establishing a Frame Relay Managing Cisco DevicesLab 1-2: Troubleshooting Switch Media WAN LicensingIssues Lab 7-3: Establishing a GRE Tunnel Lab 1-2: Troubleshooting Switch MediaLab 2-1: Performing Initial Router Setup and Lab 8-1: Implementing EIGRP IssuesConfiguration Lab 8-2: Troubleshooting EIGRP Lab 2-1: Performing Initial Router SetupLab 2-2: Connecting to the Internet Lab 8-3: Implementing EIGRP for IPv6 and ConfigurationLab 3-1: Enhancing the Security of the Initial Lab 9-1: Implementing OSPF Lab 2-2: Connecting to the InternetConfiguration Lab 9-2: Configuring Multiarea OSPF Lab 3-1: Enhancing the Security of theLab 3-2: Device Hardening Lab 9-3: Troubleshooting Multiarea OSPF Initial ConfigurationLab 3-3: Filtering Traffic with ACLs Lab 9-4: Configuring OSPF for IPv6 Lab 3-2: Device Hardening

Page 15: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Lab 4-1: Configure and Verify Basic IPv6 Lab 10-1: SNMP and Syslog Basic Lab 3-3: Filtering Traffic with ACLsLab 4-2: Configure and Verify Stateless Configuration Lab 4-1: Configure and Verify Basic IPv6Autoconfiguration Lab 10-2: Analyzing NetFlow Data Lab 4-2: Configure and Verify StatelessLab 4-3: Configure and Verify IPv6 Routing Lab 10-3: Managing Cisco Devices and AutoconfigurationLab 5-1: Configuring Expanded Switched Licensing Lab 4-3: Configure and Verify IPv6 RoutingNetworks Lab 5-1: Configuring Expanded SwitchedLab 5-2: Configuring DHCP Server NetworksLab 5-3: Troubleshooting VLANs and Trunks line Lab 5-2: Configuring DHCP ServerLab 5-4: Optimizing STP Understanding the Host-to-Host Lab 5-3: Troubleshooting VLANs andLab 5-5: Configuring EtherChannel Communications Model TrunksLab 6-1: Troubleshooting IP Connectivity Introducing LANs Lab 5-4: Optimizing STPLab 7-1: Configuring and Troubleshooting a Operating Cisco IOS Software Lab 5-5: Configuring EtherChannelSerial Connection Starting a Switch Lab 6-1: Troubleshooting IP ConnectivityLab 7-2: Establishing a Frame Relay WAN Understanding Ethernet and Switch Lab 7-1: Configuring and TroubleshootingLab 7-3: Establishing a GRE Tunnel Operation a Serial ConnectionLab 8-1: Implementing EIGRP Troubleshooting Common Switch Media Lab 7-2: Establishing a Frame Relay WANLab 8-2: Troubleshooting EIGRP Issues Lab 7-3: Establishing a GRE TunnelLab 8-3: Implementing EIGRP for IPv6 Understanding IP Addressing and Lab 8-1: Implementing EIGRPLab 9-1: Implementing OSPF Subnets Lab 8-2: Troubleshooting EIGRPLab 9-2: Configuring Multiarea OSPF Understanding the TCP/IP Transport Lab 8-3: Implementing EIGRP for IPv6Lab 9-3: Troubleshooting Multiarea OSPF Layer Lab 9-1: Implementing OSPFLab 9-4: Configuring OSPF for IPv6 Exploring the Functions of Routing Lab 9-2: Configuring Multiarea OSPFLab 10-1: SNMP and Syslog Basic Configuring a Cisco Router Lab 9-3: Troubleshooting Multiarea OSPFConfiguration Exploring the Packet Delivery Process Lab 9-4: Configuring OSPF for IPv6Lab 10-2: Analyzing NetFlow Data Enabling Static Routing Lab 10-1: SNMP and Syslog BasicLab 10-3: Managing Cisco Devices and Managing Traffic Using ACLs ConfigurationLicensing Enabling Internet Connectivity Lab 10-2: Analyzing NetFlow Data

Implementing Device Hardening Lab 10-3: Managing Cisco Devices andImplementing Traffic Filtering with ACLs Licensing

line Understanding IPv6Understanding the Host-to-Host Configuring IPv6 RoutingCommunications Model Routing Between VLANs lineIntroducing LANs Using a Cisco Network Device as a Understanding the Host-to-HostOperating Cisco IOS Software DHCP Server Communications ModelStarting a Switch Troubleshooting VLAN Connectivity Introducing LANsUnderstanding Ethernet and Switch Building Redundant Switched Topologies Operating Cisco IOS SoftwareOperation Improving Redundant Switched Starting a SwitchTroubleshooting Common Switch Media Topologies with EtherChannel Understanding Ethernet and SwitchIssues Understanding Layer 3 Redundancy OperationUnderstanding IP Addressing and Subnets Troubleshooting IPv6 Network Troubleshooting Common Switch MediaUnderstanding the TCP/IP Transport Layer Connectivity IssuesExploring the Functions of Routing Configuring Serial Encapsulation Understanding IP Addressing and SubnetsConfiguring a Cisco Router Establishing a WAN Connection Using Understanding the TCP/IP Transport LayerExploring the Packet Delivery Process Frame Relay Exploring the Functions of RoutingEnabling Static Routing Introducing VPN Solutions Configuring a Cisco RouterManaging Traffic Using ACLs Configuring GRE Tunnels Exploring the Packet Delivery ProcessEnabling Internet Connectivity Troubleshooting EIGRP Enabling Static RoutingImplementing Device Hardening Implementing EIGRP for IPv6 Managing Traffic Using ACLsImplementing Traffic Filtering with ACLs Multiarea OSPF IPv4 Implementation Enabling Internet ConnectivityUnderstanding IPv6 Troubleshooting Multiarea OSPF Implementing Device HardeningConfiguring IPv6 Routing Examining OSPFv3 Implementing Traffic Filtering with ACLs Routing Between VLANs Managing Cisco Devices Understanding IPv6Using a Cisco Network Device as a DHCP Licensing Configuring IPv6 RoutingServer Lab 1-2: Troubleshooting Switch Media Routing Between VLANsTroubleshooting VLAN Connectivity Issues Using a Cisco Network Device as a DHCPBuilding Redundant Switched Topologies Lab 2-1: Performing Initial Router Setup ServerImproving Redundant Switched Topologies and Configuration Troubleshooting VLAN Connectivitywith EtherChannel Lab 2-2: Connecting to the Internet Building Redundant Switched TopologiesUnderstanding Layer 3 Redundancy Lab 3-1: Enhancing the Security of the Improving Redundant Switched TopologiesTroubleshooting IPv6 Network Connectivity Initial Configuration with EtherChannelConfiguring Serial Encapsulation Lab 3-2: Device Hardening Understanding Layer 3 RedundancyEstablishing a WAN Connection Using Lab 3-3: Filtering Traffic with ACLs Troubleshooting IPv6 Network ConnectivityFrame Relay Lab 4-1: Configure and Verify Basic IPv6 Configuring Serial EncapsulationIntroducing VPN Solutions Lab 4-2: Configure and Verify Stateless Establishing a WAN Connection UsingConfiguring GRE Tunnels Autoconfiguration Frame RelayTroubleshooting EIGRP Lab 4-3: Configure and Verify IPv6 Introducing VPN Solutions

Page 16: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Implementing EIGRP for IPv6 Routing Configuring GRE Tunnels Multiarea OSPF IPv4 Implementation Lab 5-1: Configuring Expanded Switched Troubleshooting EIGRPTroubleshooting Multiarea OSPF Networks Implementing EIGRP for IPv6 Examining OSPFv3 Lab 5-2: Configuring DHCP Server Multiarea OSPF IPv4 ImplementationManaging Cisco Devices Lab 5-3: Troubleshooting VLANs and Troubleshooting Multiarea OSPFLicensing Trunks Examining OSPFv3 Lab 1-2: Troubleshooting Switch Media Lab 5-4: Optimizing STP Managing Cisco DevicesIssues Lab 5-5: Configuring EtherChannel LicensingLab 2-1: Performing Initial Router Setup and Lab 6-1: Troubleshooting IP Connectivity Lab 1-2: Troubleshooting Switch MediaConfiguration Lab 7-1: Configuring and Troubleshooting IssuesLab 2-2: Connecting to the Internet a Serial Connection Lab 2-1: Performing Initial Router SetupLab 3-1: Enhancing the Security of the Initial Lab 7-2: Establishing a Frame Relay and ConfigurationConfiguration WAN Lab 2-2: Connecting to the InternetLab 3-2: Device Hardening Lab 7-3: Establishing a GRE Tunnel Lab 3-1: Enhancing the Security of theLab 3-3: Filtering Traffic with ACLs Lab 8-1: Implementing EIGRP Initial ConfigurationLab 4-1: Configure and Verify Basic IPv6 Lab 8-2: Troubleshooting EIGRP Lab 3-2: Device HardeningLab 4-2: Configure and Verify Stateless Lab 8-3: Implementing EIGRP for IPv6 Lab 3-3: Filtering Traffic with ACLsAutoconfiguration Lab 9-1: Implementing OSPF Lab 4-1: Configure and Verify Basic IPv6Lab 4-3: Configure and Verify IPv6 Routing Lab 9-2: Configuring Multiarea OSPF Lab 4-2: Configure and Verify StatelessLab 5-1: Configuring Expanded Switched Lab 9-3: Troubleshooting Multiarea OSPF AutoconfigurationNetworks Lab 9-4: Configuring OSPF for IPv6 Lab 4-3: Configure and Verify IPv6 RoutingLab 5-2: Configuring DHCP Server Lab 10-1: SNMP and Syslog Basic Lab 5-1: Configuring Expanded SwitchedLab 5-3: Troubleshooting VLANs and Trunks Configuration NetworksLab 5-4: Optimizing STP Lab 10-2: Analyzing NetFlow Data Lab 5-2: Configuring DHCP ServerLab 5-5: Configuring EtherChannel Lab 10-3: Managing Cisco Devices and Lab 5-3: Troubleshooting VLANs andLab 6-1: Troubleshooting IP Connectivity Licensing TrunksLab 7-1: Configuring and Troubleshooting a Lab 5-4: Optimizing STPSerial Connection Implementing a Scalable OSPF-Based Lab 5-5: Configuring EtherChannelLab 7-2: Establishing a Frame Relay WAN Solution Lab 6-1: Troubleshooting IP ConnectivityLab 7-3: Establishing a GRE Tunnel line Lab 7-1: Configuring and TroubleshootingLab 8-1: Implementing EIGRP Implementing OSPF a Serial ConnectionLab 8-2: Troubleshooting EIGRP Lab 7-2: Establishing a Frame Relay WANLab 8-3: Implementing EIGRP for IPv6 Lab 7-3: Establishing a GRE TunnelLab 9-1: Implementing OSPF line Lab 8-1: Implementing EIGRPLab 9-2: Configuring Multiarea OSPF Understanding the Host-to-Host Lab 8-2: Troubleshooting EIGRPLab 9-3: Troubleshooting Multiarea OSPF Communications Model Lab 8-3: Implementing EIGRP for IPv6Lab 9-4: Configuring OSPF for IPv6 Introducing LANs Lab 9-1: Implementing OSPFLab 10-1: SNMP and Syslog Basic Operating Cisco IOS Software Lab 9-2: Configuring Multiarea OSPFConfiguration Starting a Switch Lab 9-3: Troubleshooting Multiarea OSPFLab 10-2: Analyzing NetFlow Data Understanding Ethernet and Switch Lab 9-4: Configuring OSPF for IPv6Lab 10-3: Managing Cisco Devices and Operation Lab 10-1: SNMP and Syslog BasicLicensing Troubleshooting Common Switch Media Configuration

Issues Lab 10-2: Analyzing NetFlow DataUnderstanding IP Addressing and Lab 10-3: Managing Cisco Devices and

line Subnets LicensingUnderstanding the Host-to-Host Understanding the TCP/IP TransportCommunications Model LayerIntroducing LANs Exploring the Functions of Routing lineOperating Cisco IOS Software Configuring a Cisco Router Understanding the Host-to-HostStarting a Switch Exploring the Packet Delivery Process Communications ModelUnderstanding Ethernet and Switch Enabling Static Routing Introducing LANsOperation Managing Traffic Using ACLs Operating Cisco IOS SoftwareTroubleshooting Common Switch Media Enabling Internet Connectivity Starting a SwitchIssues Implementing Device Hardening Understanding Ethernet and SwitchUnderstanding IP Addressing and Subnets Implementing Traffic Filtering with ACLs OperationUnderstanding the TCP/IP Transport Layer Understanding IPv6 Troubleshooting Common Switch MediaExploring the Functions of Routing Configuring IPv6 Routing IssuesConfiguring a Cisco Router Routing Between VLANs Understanding IP Addressing and SubnetsExploring the Packet Delivery Process Using a Cisco Network Device as a Understanding the TCP/IP Transport LayerEnabling Static Routing DHCP Server Exploring the Functions of RoutingManaging Traffic Using ACLs Troubleshooting VLAN Connectivity Configuring a Cisco RouterEnabling Internet Connectivity Building Redundant Switched Topologies Exploring the Packet Delivery ProcessImplementing Device Hardening Improving Redundant Switched Enabling Static RoutingImplementing Traffic Filtering with ACLs Topologies with EtherChannel Managing Traffic Using ACLsUnderstanding IPv6 Understanding Layer 3 Redundancy Enabling Internet ConnectivityConfiguring IPv6 Routing Troubleshooting IPv6 Network Implementing Device Hardening

Page 17: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Routing Between VLANs Connectivity Implementing Traffic Filtering with ACLs Using a Cisco Network Device as a DHCP Configuring Serial Encapsulation Understanding IPv6Server Establishing a WAN Connection Using Configuring IPv6 RoutingTroubleshooting VLAN Connectivity Frame Relay Routing Between VLANsBuilding Redundant Switched Topologies Introducing VPN Solutions Using a Cisco Network Device as a DHCPImproving Redundant Switched Topologies Configuring GRE Tunnels Serverwith EtherChannel Troubleshooting EIGRP Troubleshooting VLAN ConnectivityUnderstanding Layer 3 Redundancy Implementing EIGRP for IPv6 Building Redundant Switched TopologiesTroubleshooting IPv6 Network Connectivity Multiarea OSPF IPv4 Implementation Improving Redundant Switched TopologiesConfiguring Serial Encapsulation Troubleshooting Multiarea OSPF with EtherChannelEstablishing a WAN Connection Using Examining OSPFv3 Understanding Layer 3 RedundancyFrame Relay Managing Cisco Devices Troubleshooting IPv6 Network ConnectivityIntroducing VPN Solutions Licensing Configuring Serial EncapsulationConfiguring GRE Tunnels Lab 1-2: Troubleshooting Switch Media Establishing a WAN Connection UsingTroubleshooting EIGRP Issues Frame RelayImplementing EIGRP for IPv6 Lab 2-1: Performing Initial Router Setup Introducing VPN SolutionsMultiarea OSPF IPv4 Implementation and Configuration Configuring GRE Tunnels Troubleshooting Multiarea OSPF Lab 2-2: Connecting to the Internet Troubleshooting EIGRPExamining OSPFv3 Lab 3-1: Enhancing the Security of the Implementing EIGRP for IPv6 Managing Cisco Devices Initial Configuration Multiarea OSPF IPv4 ImplementationLicensing Lab 3-2: Device Hardening Troubleshooting Multiarea OSPFLab 1-2: Troubleshooting Switch Media Lab 3-3: Filtering Traffic with ACLs Examining OSPFv3 Issues Lab 4-1: Configure and Verify Basic IPv6 Managing Cisco DevicesLab 2-1: Performing Initial Router Setup and Lab 4-2: Configure and Verify Stateless LicensingConfiguration Autoconfiguration Lab 1-2: Troubleshooting Switch MediaLab 2-2: Connecting to the Internet Lab 4-3: Configure and Verify IPv6 IssuesLab 3-1: Enhancing the Security of the Initial Routing Lab 2-1: Performing Initial Router SetupConfiguration Lab 5-1: Configuring Expanded Switched and ConfigurationLab 3-2: Device Hardening Networks Lab 2-2: Connecting to the InternetLab 3-3: Filtering Traffic with ACLs Lab 5-2: Configuring DHCP Server Lab 3-1: Enhancing the Security of theLab 4-1: Configure and Verify Basic IPv6 Lab 5-3: Troubleshooting VLANs and Initial ConfigurationLab 4-2: Configure and Verify Stateless Trunks Lab 3-2: Device HardeningAutoconfiguration Lab 5-4: Optimizing STP Lab 3-3: Filtering Traffic with ACLsLab 4-3: Configure and Verify IPv6 Routing Lab 5-5: Configuring EtherChannel Lab 4-1: Configure and Verify Basic IPv6Lab 5-1: Configuring Expanded Switched Lab 6-1: Troubleshooting IP Connectivity Lab 4-2: Configure and Verify StatelessNetworks Lab 7-1: Configuring and Troubleshooting AutoconfigurationLab 5-2: Configuring DHCP Server a Serial Connection Lab 4-3: Configure and Verify IPv6 RoutingLab 5-3: Troubleshooting VLANs and Trunks Lab 7-2: Establishing a Frame Relay Lab 5-1: Configuring Expanded SwitchedLab 5-4: Optimizing STP WAN NetworksLab 5-5: Configuring EtherChannel Lab 7-3: Establishing a GRE Tunnel Lab 5-2: Configuring DHCP ServerLab 6-1: Troubleshooting IP Connectivity Lab 8-1: Implementing EIGRP Lab 5-3: Troubleshooting VLANs andLab 7-1: Configuring and Troubleshooting a Lab 8-2: Troubleshooting EIGRP TrunksSerial Connection Lab 8-3: Implementing EIGRP for IPv6 Lab 5-4: Optimizing STPLab 7-2: Establishing a Frame Relay WAN Lab 9-1: Implementing OSPF Lab 5-5: Configuring EtherChannelLab 7-3: Establishing a GRE Tunnel Lab 9-2: Configuring Multiarea OSPF Lab 6-1: Troubleshooting IP ConnectivityLab 8-1: Implementing EIGRP Lab 9-3: Troubleshooting Multiarea OSPF Lab 7-1: Configuring and TroubleshootingLab 8-2: Troubleshooting EIGRP Lab 9-4: Configuring OSPF for IPv6 a Serial ConnectionLab 8-3: Implementing EIGRP for IPv6 Lab 10-1: SNMP and Syslog Basic Lab 7-2: Establishing a Frame Relay WANLab 9-1: Implementing OSPF Configuration Lab 7-3: Establishing a GRE TunnelLab 9-2: Configuring Multiarea OSPF Lab 10-2: Analyzing NetFlow Data Lab 8-1: Implementing EIGRPLab 9-3: Troubleshooting Multiarea OSPF Lab 10-3: Managing Cisco Devices and Lab 8-2: Troubleshooting EIGRPLab 9-4: Configuring OSPF for IPv6 Licensing Lab 8-3: Implementing EIGRP for IPv6Lab 10-1: SNMP and Syslog Basic Lab 9-1: Implementing OSPFConfiguration Lab 9-2: Configuring Multiarea OSPFLab 10-2: Analyzing NetFlow Data line Lab 9-3: Troubleshooting Multiarea OSPFLab 10-3: Managing Cisco Devices and Understanding the Host-to-Host Lab 9-4: Configuring OSPF for IPv6Licensing Communications Model Lab 10-1: SNMP and Syslog Basic

Introducing LANs ConfigurationOperating Cisco IOS Software Lab 10-2: Analyzing NetFlow Data

line Starting a Switch Lab 10-3: Managing Cisco Devices andUnderstanding the Host-to-Host Understanding Ethernet and Switch LicensingCommunications Model OperationIntroducing LANs Troubleshooting Common Switch MediaOperating Cisco IOS Software Issues lineStarting a Switch Understanding IP Addressing and Understanding the Host-to-HostUnderstanding Ethernet and Switch Subnets Communications Model

Page 18: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Operation Understanding the TCP/IP Transport Introducing LANsTroubleshooting Common Switch Media Layer Operating Cisco IOS SoftwareIssues Exploring the Functions of Routing Starting a SwitchUnderstanding IP Addressing and Subnets Configuring a Cisco Router Understanding Ethernet and SwitchUnderstanding the TCP/IP Transport Layer Exploring the Packet Delivery Process OperationExploring the Functions of Routing Enabling Static Routing Troubleshooting Common Switch MediaConfiguring a Cisco Router Managing Traffic Using ACLs IssuesExploring the Packet Delivery Process Enabling Internet Connectivity Understanding IP Addressing and SubnetsEnabling Static Routing Implementing Device Hardening Understanding the TCP/IP Transport LayerManaging Traffic Using ACLs Implementing Traffic Filtering with ACLs Exploring the Functions of RoutingEnabling Internet Connectivity Understanding IPv6 Configuring a Cisco RouterImplementing Device Hardening Configuring IPv6 Routing Exploring the Packet Delivery ProcessImplementing Traffic Filtering with ACLs Routing Between VLANs Enabling Static RoutingUnderstanding IPv6 Using a Cisco Network Device as a Managing Traffic Using ACLsConfiguring IPv6 Routing DHCP Server Enabling Internet ConnectivityRouting Between VLANs Troubleshooting VLAN Connectivity Implementing Device HardeningUsing a Cisco Network Device as a DHCP Building Redundant Switched Topologies Implementing Traffic Filtering with ACLs Server Improving Redundant Switched Understanding IPv6Troubleshooting VLAN Connectivity Topologies with EtherChannel Configuring IPv6 RoutingBuilding Redundant Switched Topologies Understanding Layer 3 Redundancy Routing Between VLANsImproving Redundant Switched Topologies Troubleshooting IPv6 Network Using a Cisco Network Device as a DHCPwith EtherChannel Connectivity ServerUnderstanding Layer 3 Redundancy Configuring Serial Encapsulation Troubleshooting VLAN ConnectivityTroubleshooting IPv6 Network Connectivity Establishing a WAN Connection Using Building Redundant Switched TopologiesConfiguring Serial Encapsulation Frame Relay Improving Redundant Switched TopologiesEstablishing a WAN Connection Using Introducing VPN Solutions with EtherChannelFrame Relay Configuring GRE Tunnels Understanding Layer 3 RedundancyIntroducing VPN Solutions Troubleshooting EIGRP Troubleshooting IPv6 Network ConnectivityConfiguring GRE Tunnels Implementing EIGRP for IPv6 Configuring Serial EncapsulationTroubleshooting EIGRP Multiarea OSPF IPv4 Implementation Establishing a WAN Connection UsingImplementing EIGRP for IPv6 Troubleshooting Multiarea OSPF Frame RelayMultiarea OSPF IPv4 Implementation Examining OSPFv3 Introducing VPN SolutionsTroubleshooting Multiarea OSPF Managing Cisco Devices Configuring GRE Tunnels Examining OSPFv3 Licensing Troubleshooting EIGRPManaging Cisco Devices Lab 1-2: Troubleshooting Switch Media Implementing EIGRP for IPv6 Licensing Issues Multiarea OSPF IPv4 ImplementationLab 1-2: Troubleshooting Switch Media Lab 2-1: Performing Initial Router Setup Troubleshooting Multiarea OSPFIssues and Configuration Examining OSPFv3 Lab 2-1: Performing Initial Router Setup and Lab 2-2: Connecting to the Internet Managing Cisco DevicesConfiguration Lab 3-1: Enhancing the Security of the LicensingLab 2-2: Connecting to the Internet Initial Configuration Lab 1-2: Troubleshooting Switch MediaLab 3-1: Enhancing the Security of the Initial Lab 3-2: Device Hardening IssuesConfiguration Lab 3-3: Filtering Traffic with ACLs Lab 2-1: Performing Initial Router SetupLab 3-2: Device Hardening Lab 4-1: Configure and Verify Basic IPv6 and ConfigurationLab 3-3: Filtering Traffic with ACLs Lab 4-2: Configure and Verify Stateless Lab 2-2: Connecting to the InternetLab 4-1: Configure and Verify Basic IPv6 Autoconfiguration Lab 3-1: Enhancing the Security of theLab 4-2: Configure and Verify Stateless Lab 4-3: Configure and Verify IPv6 Initial ConfigurationAutoconfiguration Routing Lab 3-2: Device HardeningLab 4-3: Configure and Verify IPv6 Routing Lab 5-1: Configuring Expanded Switched Lab 3-3: Filtering Traffic with ACLsLab 5-1: Configuring Expanded Switched Networks Lab 4-1: Configure and Verify Basic IPv6Networks Lab 5-2: Configuring DHCP Server Lab 4-2: Configure and Verify StatelessLab 5-2: Configuring DHCP Server Lab 5-3: Troubleshooting VLANs and AutoconfigurationLab 5-3: Troubleshooting VLANs and Trunks Trunks Lab 4-3: Configure and Verify IPv6 RoutingLab 5-4: Optimizing STP Lab 5-4: Optimizing STP Lab 5-1: Configuring Expanded SwitchedLab 5-5: Configuring EtherChannel Lab 5-5: Configuring EtherChannel NetworksLab 6-1: Troubleshooting IP Connectivity Lab 6-1: Troubleshooting IP Connectivity Lab 5-2: Configuring DHCP ServerLab 7-1: Configuring and Troubleshooting a Lab 7-1: Configuring and Troubleshooting Lab 5-3: Troubleshooting VLANs andSerial Connection a Serial Connection TrunksLab 7-2: Establishing a Frame Relay WAN Lab 7-2: Establishing a Frame Relay Lab 5-4: Optimizing STPLab 7-3: Establishing a GRE Tunnel WAN Lab 5-5: Configuring EtherChannelLab 8-1: Implementing EIGRP Lab 7-3: Establishing a GRE Tunnel Lab 6-1: Troubleshooting IP ConnectivityLab 8-2: Troubleshooting EIGRP Lab 8-1: Implementing EIGRP Lab 7-1: Configuring and TroubleshootingLab 8-3: Implementing EIGRP for IPv6 Lab 8-2: Troubleshooting EIGRP a Serial ConnectionLab 9-1: Implementing OSPF Lab 8-3: Implementing EIGRP for IPv6 Lab 7-2: Establishing a Frame Relay WANLab 9-2: Configuring Multiarea OSPF Lab 9-1: Implementing OSPF Lab 7-3: Establishing a GRE TunnelLab 9-3: Troubleshooting Multiarea OSPF Lab 9-2: Configuring Multiarea OSPF Lab 8-1: Implementing EIGRP

Page 19: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Lab 9-4: Configuring OSPF for IPv6 Lab 9-3: Troubleshooting Multiarea OSPF Lab 8-2: Troubleshooting EIGRPLab 10-1: SNMP and Syslog Basic Lab 9-4: Configuring OSPF for IPv6 Lab 8-3: Implementing EIGRP for IPv6Configuration Lab 10-1: SNMP and Syslog Basic Lab 9-1: Implementing OSPFLab 10-2: Analyzing NetFlow Data Configuration Lab 9-2: Configuring Multiarea OSPFLab 10-3: Managing Cisco Devices and Lab 10-2: Analyzing NetFlow Data Lab 9-3: Troubleshooting Multiarea OSPFLicensing Lab 10-3: Managing Cisco Devices and Lab 9-4: Configuring OSPF for IPv6

Licensing Lab 10-1: SNMP and Syslog BasicConfiguration

line Lab 10-2: Analyzing NetFlow DataUnderstanding the Host-to-Host line Lab 10-3: Managing Cisco Devices andCommunications Model Understanding the Host-to-Host LicensingIntroducing LANs Communications ModelOperating Cisco IOS Software Introducing LANsStarting a Switch Operating Cisco IOS Software lineUnderstanding Ethernet and Switch Starting a Switch Understanding the Host-to-HostOperation Understanding Ethernet and Switch Communications ModelTroubleshooting Common Switch Media Operation Introducing LANsIssues Troubleshooting Common Switch Media Operating Cisco IOS SoftwareUnderstanding IP Addressing and Subnets Issues Starting a SwitchUnderstanding the TCP/IP Transport Layer Understanding IP Addressing and Understanding Ethernet and SwitchExploring the Functions of Routing Subnets OperationConfiguring a Cisco Router Understanding the TCP/IP Transport Troubleshooting Common Switch MediaExploring the Packet Delivery Process Layer IssuesEnabling Static Routing Exploring the Functions of Routing Understanding IP Addressing and SubnetsManaging Traffic Using ACLs Configuring a Cisco Router Understanding the TCP/IP Transport LayerEnabling Internet Connectivity Exploring the Packet Delivery Process Exploring the Functions of RoutingImplementing Device Hardening Enabling Static Routing Configuring a Cisco RouterImplementing Traffic Filtering with ACLs Managing Traffic Using ACLs Exploring the Packet Delivery ProcessUnderstanding IPv6 Enabling Internet Connectivity Enabling Static RoutingConfiguring IPv6 Routing Implementing Device Hardening Managing Traffic Using ACLsRouting Between VLANs Implementing Traffic Filtering with ACLs Enabling Internet ConnectivityUsing a Cisco Network Device as a DHCP Understanding IPv6 Implementing Device HardeningServer Configuring IPv6 Routing Implementing Traffic Filtering with ACLs Troubleshooting VLAN Connectivity Routing Between VLANs Understanding IPv6Building Redundant Switched Topologies Using a Cisco Network Device as a Configuring IPv6 RoutingImproving Redundant Switched Topologies DHCP Server Routing Between VLANswith EtherChannel Troubleshooting VLAN Connectivity Using a Cisco Network Device as a DHCPUnderstanding Layer 3 Redundancy Building Redundant Switched Topologies ServerTroubleshooting IPv6 Network Connectivity Improving Redundant Switched Troubleshooting VLAN ConnectivityConfiguring Serial Encapsulation Topologies with EtherChannel Building Redundant Switched TopologiesEstablishing a WAN Connection Using Understanding Layer 3 Redundancy Improving Redundant Switched TopologiesFrame Relay Troubleshooting IPv6 Network with EtherChannelIntroducing VPN Solutions Connectivity Understanding Layer 3 RedundancyConfiguring GRE Tunnels Configuring Serial Encapsulation Troubleshooting IPv6 Network ConnectivityTroubleshooting EIGRP Establishing a WAN Connection Using Configuring Serial EncapsulationImplementing EIGRP for IPv6 Frame Relay Establishing a WAN Connection UsingMultiarea OSPF IPv4 Implementation Introducing VPN Solutions Frame RelayTroubleshooting Multiarea OSPF Configuring GRE Tunnels Introducing VPN SolutionsExamining OSPFv3 Troubleshooting EIGRP Configuring GRE Tunnels Managing Cisco Devices Implementing EIGRP for IPv6 Troubleshooting EIGRPLicensing Multiarea OSPF IPv4 Implementation Implementing EIGRP for IPv6 Lab 1-2: Troubleshooting Switch Media Troubleshooting Multiarea OSPF Multiarea OSPF IPv4 ImplementationIssues Examining OSPFv3 Troubleshooting Multiarea OSPFLab 2-1: Performing Initial Router Setup and Managing Cisco Devices Examining OSPFv3 Configuration Licensing Managing Cisco DevicesLab 2-2: Connecting to the Internet Lab 1-2: Troubleshooting Switch Media LicensingLab 3-1: Enhancing the Security of the Initial Issues Lab 1-2: Troubleshooting Switch MediaConfiguration Lab 2-1: Performing Initial Router Setup IssuesLab 3-2: Device Hardening and Configuration Lab 2-1: Performing Initial Router SetupLab 3-3: Filtering Traffic with ACLs Lab 2-2: Connecting to the Internet and ConfigurationLab 4-1: Configure and Verify Basic IPv6 Lab 3-1: Enhancing the Security of the Lab 2-2: Connecting to the InternetLab 4-2: Configure and Verify Stateless Initial Configuration Lab 3-1: Enhancing the Security of theAutoconfiguration Lab 3-2: Device Hardening Initial ConfigurationLab 4-3: Configure and Verify IPv6 Routing Lab 3-3: Filtering Traffic with ACLs Lab 3-2: Device HardeningLab 5-1: Configuring Expanded Switched Lab 4-1: Configure and Verify Basic IPv6 Lab 3-3: Filtering Traffic with ACLsNetworks Lab 4-2: Configure and Verify Stateless Lab 4-1: Configure and Verify Basic IPv6

Page 20: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Lab 5-2: Configuring DHCP Server Autoconfiguration Lab 4-2: Configure and Verify StatelessLab 5-3: Troubleshooting VLANs and Trunks Lab 4-3: Configure and Verify IPv6 AutoconfigurationLab 5-4: Optimizing STP Routing Lab 4-3: Configure and Verify IPv6 RoutingLab 5-5: Configuring EtherChannel Lab 5-1: Configuring Expanded Switched Lab 5-1: Configuring Expanded SwitchedLab 6-1: Troubleshooting IP Connectivity Networks NetworksLab 7-1: Configuring and Troubleshooting a Lab 5-2: Configuring DHCP Server Lab 5-2: Configuring DHCP ServerSerial Connection Lab 5-3: Troubleshooting VLANs and Lab 5-3: Troubleshooting VLANs andLab 7-2: Establishing a Frame Relay WAN Trunks TrunksLab 7-3: Establishing a GRE Tunnel Lab 5-4: Optimizing STP Lab 5-4: Optimizing STPLab 8-1: Implementing EIGRP Lab 5-5: Configuring EtherChannel Lab 5-5: Configuring EtherChannelLab 8-2: Troubleshooting EIGRP Lab 6-1: Troubleshooting IP Connectivity Lab 6-1: Troubleshooting IP ConnectivityLab 8-3: Implementing EIGRP for IPv6 Lab 7-1: Configuring and Troubleshooting Lab 7-1: Configuring and TroubleshootingLab 9-1: Implementing OSPF a Serial Connection a Serial ConnectionLab 9-2: Configuring Multiarea OSPF Lab 7-2: Establishing a Frame Relay Lab 7-2: Establishing a Frame Relay WANLab 9-3: Troubleshooting Multiarea OSPF WAN Lab 7-3: Establishing a GRE TunnelLab 9-4: Configuring OSPF for IPv6 Lab 7-3: Establishing a GRE Tunnel Lab 8-1: Implementing EIGRPLab 10-1: SNMP and Syslog Basic Lab 8-1: Implementing EIGRP Lab 8-2: Troubleshooting EIGRPConfiguration Lab 8-2: Troubleshooting EIGRP Lab 8-3: Implementing EIGRP for IPv6Lab 10-2: Analyzing NetFlow Data Lab 8-3: Implementing EIGRP for IPv6 Lab 9-1: Implementing OSPFLab 10-3: Managing Cisco Devices and Lab 9-1: Implementing OSPF Lab 9-2: Configuring Multiarea OSPFLicensing Lab 9-2: Configuring Multiarea OSPF Lab 9-3: Troubleshooting Multiarea OSPF

Lab 9-3: Troubleshooting Multiarea OSPF Lab 9-4: Configuring OSPF for IPv6Managing Network Device Security Lab 9-4: Configuring OSPF for IPv6 Lab 10-1: SNMP and Syslog Basicline Lab 10-1: SNMP and Syslog Basic Configuration

Securing Administrative Access Configuration Lab 10-2: Analyzing NetFlow DataLab 10-2: Analyzing NetFlow Data Lab 10-3: Managing Cisco Devices andLab 10-3: Managing Cisco Devices and Licensing

line LicensingUnderstanding the Host-to-HostCommunications Model Network Device Management lineIntroducing LANs line Understanding the Host-to-HostOperating Cisco IOS Software Configuring Network Devices to Support Communications ModelStarting a Switch Network Management Protocols Introducing LANsUnderstanding Ethernet and Switch Operating Cisco IOS SoftwareOperation Starting a SwitchTroubleshooting Common Switch Media line Understanding Ethernet and SwitchIssues Understanding the Host-to-Host OperationUnderstanding IP Addressing and Subnets Communications Model Troubleshooting Common Switch MediaUnderstanding the TCP/IP Transport Layer Introducing LANs IssuesExploring the Functions of Routing Operating Cisco IOS Software Understanding IP Addressing and SubnetsConfiguring a Cisco Router Starting a Switch Understanding the TCP/IP Transport LayerExploring the Packet Delivery Process Understanding Ethernet and Switch Exploring the Functions of RoutingEnabling Static Routing Operation Configuring a Cisco RouterManaging Traffic Using ACLs Troubleshooting Common Switch Media Exploring the Packet Delivery ProcessEnabling Internet Connectivity Issues Enabling Static RoutingImplementing Device Hardening Understanding IP Addressing and Managing Traffic Using ACLsImplementing Traffic Filtering with ACLs Subnets Enabling Internet ConnectivityUnderstanding IPv6 Understanding the TCP/IP Transport Implementing Device HardeningConfiguring IPv6 Routing Layer Implementing Traffic Filtering with ACLs Routing Between VLANs Exploring the Functions of Routing Understanding IPv6Using a Cisco Network Device as a DHCP Configuring a Cisco Router Configuring IPv6 RoutingServer Exploring the Packet Delivery Process Routing Between VLANsTroubleshooting VLAN Connectivity Enabling Static Routing Using a Cisco Network Device as a DHCPBuilding Redundant Switched Topologies Managing Traffic Using ACLs ServerImproving Redundant Switched Topologies Enabling Internet Connectivity Troubleshooting VLAN Connectivitywith EtherChannel Implementing Device Hardening Building Redundant Switched TopologiesUnderstanding Layer 3 Redundancy Implementing Traffic Filtering with ACLs Improving Redundant Switched TopologiesTroubleshooting IPv6 Network Connectivity Understanding IPv6 with EtherChannelConfiguring Serial Encapsulation Configuring IPv6 Routing Understanding Layer 3 RedundancyEstablishing a WAN Connection Using Routing Between VLANs Troubleshooting IPv6 Network ConnectivityFrame Relay Using a Cisco Network Device as a Configuring Serial EncapsulationIntroducing VPN Solutions DHCP Server Establishing a WAN Connection UsingConfiguring GRE Tunnels Troubleshooting VLAN Connectivity Frame RelayTroubleshooting EIGRP Building Redundant Switched Topologies Introducing VPN SolutionsImplementing EIGRP for IPv6 Improving Redundant Switched Configuring GRE Tunnels Multiarea OSPF IPv4 Implementation Topologies with EtherChannel Troubleshooting EIGRP

Page 21: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Troubleshooting Multiarea OSPF Understanding Layer 3 Redundancy Implementing EIGRP for IPv6 Examining OSPFv3 Troubleshooting IPv6 Network Multiarea OSPF IPv4 ImplementationManaging Cisco Devices Connectivity Troubleshooting Multiarea OSPFLicensing Configuring Serial Encapsulation Examining OSPFv3 Lab 1-2: Troubleshooting Switch Media Establishing a WAN Connection Using Managing Cisco DevicesIssues Frame Relay LicensingLab 2-1: Performing Initial Router Setup and Introducing VPN Solutions Lab 1-2: Troubleshooting Switch MediaConfiguration Configuring GRE Tunnels IssuesLab 2-2: Connecting to the Internet Troubleshooting EIGRP Lab 2-1: Performing Initial Router SetupLab 3-1: Enhancing the Security of the Initial Implementing EIGRP for IPv6 and ConfigurationConfiguration Multiarea OSPF IPv4 Implementation Lab 2-2: Connecting to the InternetLab 3-2: Device Hardening Troubleshooting Multiarea OSPF Lab 3-1: Enhancing the Security of theLab 3-3: Filtering Traffic with ACLs Examining OSPFv3 Initial ConfigurationLab 4-1: Configure and Verify Basic IPv6 Managing Cisco Devices Lab 3-2: Device HardeningLab 4-2: Configure and Verify Stateless Licensing Lab 3-3: Filtering Traffic with ACLsAutoconfiguration Lab 1-2: Troubleshooting Switch Media Lab 4-1: Configure and Verify Basic IPv6Lab 4-3: Configure and Verify IPv6 Routing Issues Lab 4-2: Configure and Verify StatelessLab 5-1: Configuring Expanded Switched Lab 2-1: Performing Initial Router Setup AutoconfigurationNetworks and Configuration Lab 4-3: Configure and Verify IPv6 RoutingLab 5-2: Configuring DHCP Server Lab 2-2: Connecting to the Internet Lab 5-1: Configuring Expanded SwitchedLab 5-3: Troubleshooting VLANs and Trunks Lab 3-1: Enhancing the Security of the NetworksLab 5-4: Optimizing STP Initial Configuration Lab 5-2: Configuring DHCP ServerLab 5-5: Configuring EtherChannel Lab 3-2: Device Hardening Lab 5-3: Troubleshooting VLANs andLab 6-1: Troubleshooting IP Connectivity Lab 3-3: Filtering Traffic with ACLs TrunksLab 7-1: Configuring and Troubleshooting a Lab 4-1: Configure and Verify Basic IPv6 Lab 5-4: Optimizing STPSerial Connection Lab 4-2: Configure and Verify Stateless Lab 5-5: Configuring EtherChannelLab 7-2: Establishing a Frame Relay WAN Autoconfiguration Lab 6-1: Troubleshooting IP ConnectivityLab 7-3: Establishing a GRE Tunnel Lab 4-3: Configure and Verify IPv6 Lab 7-1: Configuring and TroubleshootingLab 8-1: Implementing EIGRP Routing a Serial ConnectionLab 8-2: Troubleshooting EIGRP Lab 5-1: Configuring Expanded Switched Lab 7-2: Establishing a Frame Relay WANLab 8-3: Implementing EIGRP for IPv6 Networks Lab 7-3: Establishing a GRE TunnelLab 9-1: Implementing OSPF Lab 5-2: Configuring DHCP Server Lab 8-1: Implementing EIGRPLab 9-2: Configuring Multiarea OSPF Lab 5-3: Troubleshooting VLANs and Lab 8-2: Troubleshooting EIGRPLab 9-3: Troubleshooting Multiarea OSPF Trunks Lab 8-3: Implementing EIGRP for IPv6Lab 9-4: Configuring OSPF for IPv6 Lab 5-4: Optimizing STP Lab 9-1: Implementing OSPFLab 10-1: SNMP and Syslog Basic Lab 5-5: Configuring EtherChannel Lab 9-2: Configuring Multiarea OSPFConfiguration Lab 6-1: Troubleshooting IP Connectivity Lab 9-3: Troubleshooting Multiarea OSPFLab 10-2: Analyzing NetFlow Data Lab 7-1: Configuring and Troubleshooting Lab 9-4: Configuring OSPF for IPv6Lab 10-3: Managing Cisco Devices and a Serial Connection Lab 10-1: SNMP and Syslog BasicLicensing Lab 7-2: Establishing a Frame Relay Configuration

WAN Lab 10-2: Analyzing NetFlow DataLab 7-3: Establishing a GRE Tunnel Lab 10-3: Managing Cisco Devices and

line Lab 8-1: Implementing EIGRP LicensingUnderstanding the Host-to-Host Lab 8-2: Troubleshooting EIGRPCommunications Model Lab 8-3: Implementing EIGRP for IPv6Introducing LANs Lab 9-1: Implementing OSPF lineOperating Cisco IOS Software Lab 9-2: Configuring Multiarea OSPF Understanding the Host-to-HostStarting a Switch Lab 9-3: Troubleshooting Multiarea OSPF Communications ModelUnderstanding Ethernet and Switch Lab 9-4: Configuring OSPF for IPv6 Introducing LANsOperation Lab 10-1: SNMP and Syslog Basic Operating Cisco IOS SoftwareTroubleshooting Common Switch Media Configuration Starting a SwitchIssues Lab 10-2: Analyzing NetFlow Data Understanding Ethernet and SwitchUnderstanding IP Addressing and Subnets Lab 10-3: Managing Cisco Devices and OperationUnderstanding the TCP/IP Transport Layer Licensing Troubleshooting Common Switch MediaExploring the Functions of Routing IssuesConfiguring a Cisco Router Understanding IP Addressing and SubnetsExploring the Packet Delivery Process line Understanding the TCP/IP Transport LayerEnabling Static Routing Understanding the Host-to-Host Exploring the Functions of RoutingManaging Traffic Using ACLs Communications Model Configuring a Cisco RouterEnabling Internet Connectivity Introducing LANs Exploring the Packet Delivery ProcessImplementing Device Hardening Operating Cisco IOS Software Enabling Static RoutingImplementing Traffic Filtering with ACLs Starting a Switch Managing Traffic Using ACLsUnderstanding IPv6 Understanding Ethernet and Switch Enabling Internet ConnectivityConfiguring IPv6 Routing Operation Implementing Device HardeningRouting Between VLANs Troubleshooting Common Switch Media Implementing Traffic Filtering with ACLs Using a Cisco Network Device as a DHCP Issues Understanding IPv6

Page 22: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Server Understanding IP Addressing and Configuring IPv6 RoutingTroubleshooting VLAN Connectivity Subnets Routing Between VLANsBuilding Redundant Switched Topologies Understanding the TCP/IP Transport Using a Cisco Network Device as a DHCPImproving Redundant Switched Topologies Layer Serverwith EtherChannel Exploring the Functions of Routing Troubleshooting VLAN ConnectivityUnderstanding Layer 3 Redundancy Configuring a Cisco Router Building Redundant Switched TopologiesTroubleshooting IPv6 Network Connectivity Exploring the Packet Delivery Process Improving Redundant Switched TopologiesConfiguring Serial Encapsulation Enabling Static Routing with EtherChannelEstablishing a WAN Connection Using Managing Traffic Using ACLs Understanding Layer 3 RedundancyFrame Relay Enabling Internet Connectivity Troubleshooting IPv6 Network ConnectivityIntroducing VPN Solutions Implementing Device Hardening Configuring Serial EncapsulationConfiguring GRE Tunnels Implementing Traffic Filtering with ACLs Establishing a WAN Connection UsingTroubleshooting EIGRP Understanding IPv6 Frame RelayImplementing EIGRP for IPv6 Configuring IPv6 Routing Introducing VPN SolutionsMultiarea OSPF IPv4 Implementation Routing Between VLANs Configuring GRE Tunnels Troubleshooting Multiarea OSPF Using a Cisco Network Device as a Troubleshooting EIGRPExamining OSPFv3 DHCP Server Implementing EIGRP for IPv6 Managing Cisco Devices Troubleshooting VLAN Connectivity Multiarea OSPF IPv4 ImplementationLicensing Building Redundant Switched Topologies Troubleshooting Multiarea OSPFLab 1-2: Troubleshooting Switch Media Improving Redundant Switched Examining OSPFv3 Issues Topologies with EtherChannel Managing Cisco DevicesLab 2-1: Performing Initial Router Setup and Understanding Layer 3 Redundancy LicensingConfiguration Troubleshooting IPv6 Network Lab 1-2: Troubleshooting Switch MediaLab 2-2: Connecting to the Internet Connectivity IssuesLab 3-1: Enhancing the Security of the Initial Configuring Serial Encapsulation Lab 2-1: Performing Initial Router SetupConfiguration Establishing a WAN Connection Using and ConfigurationLab 3-2: Device Hardening Frame Relay Lab 2-2: Connecting to the InternetLab 3-3: Filtering Traffic with ACLs Introducing VPN Solutions Lab 3-1: Enhancing the Security of theLab 4-1: Configure and Verify Basic IPv6 Configuring GRE Tunnels Initial ConfigurationLab 4-2: Configure and Verify Stateless Troubleshooting EIGRP Lab 3-2: Device HardeningAutoconfiguration Implementing EIGRP for IPv6 Lab 3-3: Filtering Traffic with ACLsLab 4-3: Configure and Verify IPv6 Routing Multiarea OSPF IPv4 Implementation Lab 4-1: Configure and Verify Basic IPv6Lab 5-1: Configuring Expanded Switched Troubleshooting Multiarea OSPF Lab 4-2: Configure and Verify StatelessNetworks Examining OSPFv3 AutoconfigurationLab 5-2: Configuring DHCP Server Managing Cisco Devices Lab 4-3: Configure and Verify IPv6 RoutingLab 5-3: Troubleshooting VLANs and Trunks Licensing Lab 5-1: Configuring Expanded SwitchedLab 5-4: Optimizing STP Lab 1-2: Troubleshooting Switch Media NetworksLab 5-5: Configuring EtherChannel Issues Lab 5-2: Configuring DHCP ServerLab 6-1: Troubleshooting IP Connectivity Lab 2-1: Performing Initial Router Setup Lab 5-3: Troubleshooting VLANs andLab 7-1: Configuring and Troubleshooting a and Configuration TrunksSerial Connection Lab 2-2: Connecting to the Internet Lab 5-4: Optimizing STPLab 7-2: Establishing a Frame Relay WAN Lab 3-1: Enhancing the Security of the Lab 5-5: Configuring EtherChannelLab 7-3: Establishing a GRE Tunnel Initial Configuration Lab 6-1: Troubleshooting IP ConnectivityLab 8-1: Implementing EIGRP Lab 3-2: Device Hardening Lab 7-1: Configuring and TroubleshootingLab 8-2: Troubleshooting EIGRP Lab 3-3: Filtering Traffic with ACLs a Serial ConnectionLab 8-3: Implementing EIGRP for IPv6 Lab 4-1: Configure and Verify Basic IPv6 Lab 7-2: Establishing a Frame Relay WANLab 9-1: Implementing OSPF Lab 4-2: Configure and Verify Stateless Lab 7-3: Establishing a GRE TunnelLab 9-2: Configuring Multiarea OSPF Autoconfiguration Lab 8-1: Implementing EIGRPLab 9-3: Troubleshooting Multiarea OSPF Lab 4-3: Configure and Verify IPv6 Lab 8-2: Troubleshooting EIGRPLab 9-4: Configuring OSPF for IPv6 Routing Lab 8-3: Implementing EIGRP for IPv6Lab 10-1: SNMP and Syslog Basic Lab 5-1: Configuring Expanded Switched Lab 9-1: Implementing OSPFConfiguration Networks Lab 9-2: Configuring Multiarea OSPFLab 10-2: Analyzing NetFlow Data Lab 5-2: Configuring DHCP Server Lab 9-3: Troubleshooting Multiarea OSPFLab 10-3: Managing Cisco Devices and Lab 5-3: Troubleshooting VLANs and Lab 9-4: Configuring OSPF for IPv6Licensing Trunks Lab 10-1: SNMP and Syslog Basic

Lab 5-4: Optimizing STP ConfigurationIntroducing IPv6 Lab 5-5: Configuring EtherChannel Lab 10-2: Analyzing NetFlow Dataline Lab 6-1: Troubleshooting IP Connectivity Lab 10-3: Managing Cisco Devices and

Introducing Basic IPv6 Lab 7-1: Configuring and Troubleshooting Licensinga Serial ConnectionLab 7-2: Establishing a Frame Relay

line WAN lineUnderstanding the Host-to-Host Lab 7-3: Establishing a GRE Tunnel Understanding the Host-to-HostCommunications Model Lab 8-1: Implementing EIGRP Communications ModelIntroducing LANs Lab 8-2: Troubleshooting EIGRP Introducing LANsOperating Cisco IOS Software Lab 8-3: Implementing EIGRP for IPv6 Operating Cisco IOS Software

Page 23: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Starting a Switch Lab 9-1: Implementing OSPF Starting a SwitchUnderstanding Ethernet and Switch Lab 9-2: Configuring Multiarea OSPF Understanding Ethernet and SwitchOperation Lab 9-3: Troubleshooting Multiarea OSPF OperationTroubleshooting Common Switch Media Lab 9-4: Configuring OSPF for IPv6 Troubleshooting Common Switch MediaIssues Lab 10-1: SNMP and Syslog Basic IssuesUnderstanding IP Addressing and Subnets Configuration Understanding IP Addressing and SubnetsUnderstanding the TCP/IP Transport Layer Lab 10-2: Analyzing NetFlow Data Understanding the TCP/IP Transport LayerExploring the Functions of Routing Lab 10-3: Managing Cisco Devices and Exploring the Functions of RoutingConfiguring a Cisco Router Licensing Configuring a Cisco RouterExploring the Packet Delivery Process Exploring the Packet Delivery ProcessEnabling Static Routing Labs Enabling Static RoutingManaging Traffic Using ACLs line Managing Traffic Using ACLsEnabling Internet Connectivity Lab 1-1: Performing Switch Startup and Enabling Internet ConnectivityImplementing Device Hardening Initial Configuration Implementing Device HardeningImplementing Traffic Filtering with ACLs Implementing Traffic Filtering with ACLs Understanding IPv6 Understanding IPv6Configuring IPv6 Routing line Configuring IPv6 RoutingRouting Between VLANs Understanding the Host-to-Host Routing Between VLANsUsing a Cisco Network Device as a DHCP Communications Model Using a Cisco Network Device as a DHCPServer Introducing LANs ServerTroubleshooting VLAN Connectivity Operating Cisco IOS Software Troubleshooting VLAN ConnectivityBuilding Redundant Switched Topologies Starting a Switch Building Redundant Switched TopologiesImproving Redundant Switched Topologies Understanding Ethernet and Switch Improving Redundant Switched Topologieswith EtherChannel Operation with EtherChannelUnderstanding Layer 3 Redundancy Troubleshooting Common Switch Media Understanding Layer 3 RedundancyTroubleshooting IPv6 Network Connectivity Issues Troubleshooting IPv6 Network ConnectivityConfiguring Serial Encapsulation Understanding IP Addressing and Configuring Serial EncapsulationEstablishing a WAN Connection Using Subnets Establishing a WAN Connection UsingFrame Relay Understanding the TCP/IP Transport Frame RelayIntroducing VPN Solutions Layer Introducing VPN SolutionsConfiguring GRE Tunnels Exploring the Functions of Routing Configuring GRE Tunnels Troubleshooting EIGRP Configuring a Cisco Router Troubleshooting EIGRPImplementing EIGRP for IPv6 Exploring the Packet Delivery Process Implementing EIGRP for IPv6 Multiarea OSPF IPv4 Implementation Enabling Static Routing Multiarea OSPF IPv4 ImplementationTroubleshooting Multiarea OSPF Managing Traffic Using ACLs Troubleshooting Multiarea OSPFExamining OSPFv3 Enabling Internet Connectivity Examining OSPFv3 Managing Cisco Devices Implementing Device Hardening Managing Cisco DevicesLicensing Implementing Traffic Filtering with ACLs LicensingLab 1-2: Troubleshooting Switch Media Understanding IPv6 Lab 1-2: Troubleshooting Switch MediaIssues Configuring IPv6 Routing IssuesLab 2-1: Performing Initial Router Setup and Routing Between VLANs Lab 2-1: Performing Initial Router SetupConfiguration Using a Cisco Network Device as a and ConfigurationLab 2-2: Connecting to the Internet DHCP Server Lab 2-2: Connecting to the InternetLab 3-1: Enhancing the Security of the Initial Troubleshooting VLAN Connectivity Lab 3-1: Enhancing the Security of theConfiguration Building Redundant Switched Topologies Initial ConfigurationLab 3-2: Device Hardening Improving Redundant Switched Lab 3-2: Device HardeningLab 3-3: Filtering Traffic with ACLs Topologies with EtherChannel Lab 3-3: Filtering Traffic with ACLsLab 4-1: Configure and Verify Basic IPv6 Understanding Layer 3 Redundancy Lab 4-1: Configure and Verify Basic IPv6Lab 4-2: Configure and Verify Stateless Troubleshooting IPv6 Network Lab 4-2: Configure and Verify StatelessAutoconfiguration Connectivity AutoconfigurationLab 4-3: Configure and Verify IPv6 Routing Configuring Serial Encapsulation Lab 4-3: Configure and Verify IPv6 RoutingLab 5-1: Configuring Expanded Switched Establishing a WAN Connection Using Lab 5-1: Configuring Expanded SwitchedNetworks Frame Relay NetworksLab 5-2: Configuring DHCP Server Introducing VPN Solutions Lab 5-2: Configuring DHCP ServerLab 5-3: Troubleshooting VLANs and Trunks Configuring GRE Tunnels Lab 5-3: Troubleshooting VLANs andLab 5-4: Optimizing STP Troubleshooting EIGRP TrunksLab 5-5: Configuring EtherChannel Implementing EIGRP for IPv6 Lab 5-4: Optimizing STPLab 6-1: Troubleshooting IP Connectivity Multiarea OSPF IPv4 Implementation Lab 5-5: Configuring EtherChannelLab 7-1: Configuring and Troubleshooting a Troubleshooting Multiarea OSPF Lab 6-1: Troubleshooting IP ConnectivitySerial Connection Examining OSPFv3 Lab 7-1: Configuring and TroubleshootingLab 7-2: Establishing a Frame Relay WAN Managing Cisco Devices a Serial ConnectionLab 7-3: Establishing a GRE Tunnel Licensing Lab 7-2: Establishing a Frame Relay WANLab 8-1: Implementing EIGRP Lab 1-2: Troubleshooting Switch Media Lab 7-3: Establishing a GRE TunnelLab 8-2: Troubleshooting EIGRP Issues Lab 8-1: Implementing EIGRPLab 8-3: Implementing EIGRP for IPv6 Lab 2-1: Performing Initial Router Setup Lab 8-2: Troubleshooting EIGRPLab 9-1: Implementing OSPF and Configuration Lab 8-3: Implementing EIGRP for IPv6

Page 24: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Lab 9-2: Configuring Multiarea OSPF Lab 2-2: Connecting to the Internet Lab 9-1: Implementing OSPFLab 9-3: Troubleshooting Multiarea OSPF Lab 3-1: Enhancing the Security of the Lab 9-2: Configuring Multiarea OSPFLab 9-4: Configuring OSPF for IPv6 Initial Configuration Lab 9-3: Troubleshooting Multiarea OSPFLab 10-1: SNMP and Syslog Basic Lab 3-2: Device Hardening Lab 9-4: Configuring OSPF for IPv6Configuration Lab 3-3: Filtering Traffic with ACLs Lab 10-1: SNMP and Syslog BasicLab 10-2: Analyzing NetFlow Data Lab 4-1: Configure and Verify Basic IPv6 ConfigurationLab 10-3: Managing Cisco Devices and Lab 4-2: Configure and Verify Stateless Lab 10-2: Analyzing NetFlow DataLicensing Autoconfiguration Lab 10-3: Managing Cisco Devices and

Lab 4-3: Configure and Verify IPv6 LicensingRouting

line Lab 5-1: Configuring Expanded SwitchedUnderstanding the Host-to-Host Networks lineCommunications Model Lab 5-2: Configuring DHCP Server Understanding the Host-to-HostIntroducing LANs Lab 5-3: Troubleshooting VLANs and Communications ModelOperating Cisco IOS Software Trunks Introducing LANsStarting a Switch Lab 5-4: Optimizing STP Operating Cisco IOS SoftwareUnderstanding Ethernet and Switch Lab 5-5: Configuring EtherChannel Starting a SwitchOperation Lab 6-1: Troubleshooting IP Connectivity Understanding Ethernet and SwitchTroubleshooting Common Switch Media Lab 7-1: Configuring and Troubleshooting OperationIssues a Serial Connection Troubleshooting Common Switch MediaUnderstanding IP Addressing and Subnets Lab 7-2: Establishing a Frame Relay IssuesUnderstanding the TCP/IP Transport Layer WAN Understanding IP Addressing and SubnetsExploring the Functions of Routing Lab 7-3: Establishing a GRE Tunnel Understanding the TCP/IP Transport LayerConfiguring a Cisco Router Lab 8-1: Implementing EIGRP Exploring the Functions of RoutingExploring the Packet Delivery Process Lab 8-2: Troubleshooting EIGRP Configuring a Cisco RouterEnabling Static Routing Lab 8-3: Implementing EIGRP for IPv6 Exploring the Packet Delivery ProcessManaging Traffic Using ACLs Lab 9-1: Implementing OSPF Enabling Static RoutingEnabling Internet Connectivity Lab 9-2: Configuring Multiarea OSPF Managing Traffic Using ACLsImplementing Device Hardening Lab 9-3: Troubleshooting Multiarea OSPF Enabling Internet ConnectivityImplementing Traffic Filtering with ACLs Lab 9-4: Configuring OSPF for IPv6 Implementing Device HardeningUnderstanding IPv6 Lab 10-1: SNMP and Syslog Basic Implementing Traffic Filtering with ACLs Configuring IPv6 Routing Configuration Understanding IPv6Routing Between VLANs Lab 10-2: Analyzing NetFlow Data Configuring IPv6 RoutingUsing a Cisco Network Device as a DHCP Lab 10-3: Managing Cisco Devices and Routing Between VLANsServer Licensing Using a Cisco Network Device as a DHCPTroubleshooting VLAN Connectivity ServerBuilding Redundant Switched Topologies Troubleshooting VLAN ConnectivityImproving Redundant Switched Topologies line Building Redundant Switched Topologieswith EtherChannel Understanding the Host-to-Host Improving Redundant Switched TopologiesUnderstanding Layer 3 Redundancy Communications Model with EtherChannelTroubleshooting IPv6 Network Connectivity Introducing LANs Understanding Layer 3 RedundancyConfiguring Serial Encapsulation Operating Cisco IOS Software Troubleshooting IPv6 Network ConnectivityEstablishing a WAN Connection Using Starting a Switch Configuring Serial EncapsulationFrame Relay Understanding Ethernet and Switch Establishing a WAN Connection UsingIntroducing VPN Solutions Operation Frame RelayConfiguring GRE Tunnels Troubleshooting Common Switch Media Introducing VPN SolutionsTroubleshooting EIGRP Issues Configuring GRE Tunnels Implementing EIGRP for IPv6 Understanding IP Addressing and Troubleshooting EIGRPMultiarea OSPF IPv4 Implementation Subnets Implementing EIGRP for IPv6 Troubleshooting Multiarea OSPF Understanding the TCP/IP Transport Multiarea OSPF IPv4 ImplementationExamining OSPFv3 Layer Troubleshooting Multiarea OSPFManaging Cisco Devices Exploring the Functions of Routing Examining OSPFv3 Licensing Configuring a Cisco Router Managing Cisco DevicesLab 1-2: Troubleshooting Switch Media Exploring the Packet Delivery Process LicensingIssues Enabling Static Routing Lab 1-2: Troubleshooting Switch MediaLab 2-1: Performing Initial Router Setup and Managing Traffic Using ACLs IssuesConfiguration Enabling Internet Connectivity Lab 2-1: Performing Initial Router SetupLab 2-2: Connecting to the Internet Implementing Device Hardening and ConfigurationLab 3-1: Enhancing the Security of the Initial Implementing Traffic Filtering with ACLs Lab 2-2: Connecting to the InternetConfiguration Understanding IPv6 Lab 3-1: Enhancing the Security of theLab 3-2: Device Hardening Configuring IPv6 Routing Initial ConfigurationLab 3-3: Filtering Traffic with ACLs Routing Between VLANs Lab 3-2: Device HardeningLab 4-1: Configure and Verify Basic IPv6 Using a Cisco Network Device as a Lab 3-3: Filtering Traffic with ACLsLab 4-2: Configure and Verify Stateless DHCP Server Lab 4-1: Configure and Verify Basic IPv6Autoconfiguration Troubleshooting VLAN Connectivity Lab 4-2: Configure and Verify StatelessLab 4-3: Configure and Verify IPv6 Routing Building Redundant Switched Topologies Autoconfiguration

Page 25: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Lab 5-1: Configuring Expanded Switched Improving Redundant Switched Lab 4-3: Configure and Verify IPv6 RoutingNetworks Topologies with EtherChannel Lab 5-1: Configuring Expanded SwitchedLab 5-2: Configuring DHCP Server Understanding Layer 3 Redundancy NetworksLab 5-3: Troubleshooting VLANs and Trunks Troubleshooting IPv6 Network Lab 5-2: Configuring DHCP ServerLab 5-4: Optimizing STP Connectivity Lab 5-3: Troubleshooting VLANs andLab 5-5: Configuring EtherChannel Configuring Serial Encapsulation TrunksLab 6-1: Troubleshooting IP Connectivity Establishing a WAN Connection Using Lab 5-4: Optimizing STPLab 7-1: Configuring and Troubleshooting a Frame Relay Lab 5-5: Configuring EtherChannelSerial Connection Introducing VPN Solutions Lab 6-1: Troubleshooting IP ConnectivityLab 7-2: Establishing a Frame Relay WAN Configuring GRE Tunnels Lab 7-1: Configuring and TroubleshootingLab 7-3: Establishing a GRE Tunnel Troubleshooting EIGRP a Serial ConnectionLab 8-1: Implementing EIGRP Implementing EIGRP for IPv6 Lab 7-2: Establishing a Frame Relay WANLab 8-2: Troubleshooting EIGRP Multiarea OSPF IPv4 Implementation Lab 7-3: Establishing a GRE TunnelLab 8-3: Implementing EIGRP for IPv6 Troubleshooting Multiarea OSPF Lab 8-1: Implementing EIGRPLab 9-1: Implementing OSPF Examining OSPFv3 Lab 8-2: Troubleshooting EIGRPLab 9-2: Configuring Multiarea OSPF Managing Cisco Devices Lab 8-3: Implementing EIGRP for IPv6Lab 9-3: Troubleshooting Multiarea OSPF Licensing Lab 9-1: Implementing OSPFLab 9-4: Configuring OSPF for IPv6 Lab 1-2: Troubleshooting Switch Media Lab 9-2: Configuring Multiarea OSPFLab 10-1: SNMP and Syslog Basic Issues Lab 9-3: Troubleshooting Multiarea OSPFConfiguration Lab 2-1: Performing Initial Router Setup Lab 9-4: Configuring OSPF for IPv6Lab 10-2: Analyzing NetFlow Data and Configuration Lab 10-1: SNMP and Syslog BasicLab 10-3: Managing Cisco Devices and Lab 2-2: Connecting to the Internet ConfigurationLicensing Lab 3-1: Enhancing the Security of the Lab 10-2: Analyzing NetFlow Data

Initial Configuration Lab 10-3: Managing Cisco Devices andBuilding a Medium-Sized Network Lab 3-2: Device Hardening Licensingline Lab 3-3: Filtering Traffic with ACLs

Implementing VLANs and Trunks Lab 4-1: Configure and Verify Basic IPv6Lab 4-2: Configure and Verify Stateless lineAutoconfiguration Understanding the Host-to-Host

line Lab 4-3: Configure and Verify IPv6 Communications ModelUnderstanding the Host-to-Host Routing Introducing LANsCommunications Model Lab 5-1: Configuring Expanded Switched Operating Cisco IOS SoftwareIntroducing LANs Networks Starting a SwitchOperating Cisco IOS Software Lab 5-2: Configuring DHCP Server Understanding Ethernet and SwitchStarting a Switch Lab 5-3: Troubleshooting VLANs and OperationUnderstanding Ethernet and Switch Trunks Troubleshooting Common Switch MediaOperation Lab 5-4: Optimizing STP IssuesTroubleshooting Common Switch Media Lab 5-5: Configuring EtherChannel Understanding IP Addressing and SubnetsIssues Lab 6-1: Troubleshooting IP Connectivity Understanding the TCP/IP Transport LayerUnderstanding IP Addressing and Subnets Lab 7-1: Configuring and Troubleshooting Exploring the Functions of RoutingUnderstanding the TCP/IP Transport Layer a Serial Connection Configuring a Cisco RouterExploring the Functions of Routing Lab 7-2: Establishing a Frame Relay Exploring the Packet Delivery ProcessConfiguring a Cisco Router WAN Enabling Static RoutingExploring the Packet Delivery Process Lab 7-3: Establishing a GRE Tunnel Managing Traffic Using ACLsEnabling Static Routing Lab 8-1: Implementing EIGRP Enabling Internet ConnectivityManaging Traffic Using ACLs Lab 8-2: Troubleshooting EIGRP Implementing Device HardeningEnabling Internet Connectivity Lab 8-3: Implementing EIGRP for IPv6 Implementing Traffic Filtering with ACLs Implementing Device Hardening Lab 9-1: Implementing OSPF Understanding IPv6Implementing Traffic Filtering with ACLs Lab 9-2: Configuring Multiarea OSPF Configuring IPv6 RoutingUnderstanding IPv6 Lab 9-3: Troubleshooting Multiarea OSPF Routing Between VLANsConfiguring IPv6 Routing Lab 9-4: Configuring OSPF for IPv6 Using a Cisco Network Device as a DHCPRouting Between VLANs Lab 10-1: SNMP and Syslog Basic ServerUsing a Cisco Network Device as a DHCP Configuration Troubleshooting VLAN ConnectivityServer Lab 10-2: Analyzing NetFlow Data Building Redundant Switched TopologiesTroubleshooting VLAN Connectivity Lab 10-3: Managing Cisco Devices and Improving Redundant Switched TopologiesBuilding Redundant Switched Topologies Licensing with EtherChannelImproving Redundant Switched Topologies Understanding Layer 3 Redundancywith EtherChannel Troubleshooting IPv6 Network ConnectivityUnderstanding Layer 3 Redundancy line Configuring Serial EncapsulationTroubleshooting IPv6 Network Connectivity Understanding the Host-to-Host Establishing a WAN Connection UsingConfiguring Serial Encapsulation Communications Model Frame RelayEstablishing a WAN Connection Using Introducing LANs Introducing VPN SolutionsFrame Relay Operating Cisco IOS Software Configuring GRE Tunnels Introducing VPN Solutions Starting a Switch Troubleshooting EIGRPConfiguring GRE Tunnels Understanding Ethernet and Switch Implementing EIGRP for IPv6 Troubleshooting EIGRP Operation Multiarea OSPF IPv4 Implementation

Page 26: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Implementing EIGRP for IPv6 Troubleshooting Common Switch Media Troubleshooting Multiarea OSPFMultiarea OSPF IPv4 Implementation Issues Examining OSPFv3 Troubleshooting Multiarea OSPF Understanding IP Addressing and Managing Cisco DevicesExamining OSPFv3 Subnets LicensingManaging Cisco Devices Understanding the TCP/IP Transport Lab 1-2: Troubleshooting Switch MediaLicensing Layer IssuesLab 1-2: Troubleshooting Switch Media Exploring the Functions of Routing Lab 2-1: Performing Initial Router SetupIssues Configuring a Cisco Router and ConfigurationLab 2-1: Performing Initial Router Setup and Exploring the Packet Delivery Process Lab 2-2: Connecting to the InternetConfiguration Enabling Static Routing Lab 3-1: Enhancing the Security of theLab 2-2: Connecting to the Internet Managing Traffic Using ACLs Initial ConfigurationLab 3-1: Enhancing the Security of the Initial Enabling Internet Connectivity Lab 3-2: Device HardeningConfiguration Implementing Device Hardening Lab 3-3: Filtering Traffic with ACLsLab 3-2: Device Hardening Implementing Traffic Filtering with ACLs Lab 4-1: Configure and Verify Basic IPv6Lab 3-3: Filtering Traffic with ACLs Understanding IPv6 Lab 4-2: Configure and Verify StatelessLab 4-1: Configure and Verify Basic IPv6 Configuring IPv6 Routing AutoconfigurationLab 4-2: Configure and Verify Stateless Routing Between VLANs Lab 4-3: Configure and Verify IPv6 RoutingAutoconfiguration Using a Cisco Network Device as a Lab 5-1: Configuring Expanded SwitchedLab 4-3: Configure and Verify IPv6 Routing DHCP Server NetworksLab 5-1: Configuring Expanded Switched Troubleshooting VLAN Connectivity Lab 5-2: Configuring DHCP ServerNetworks Building Redundant Switched Topologies Lab 5-3: Troubleshooting VLANs andLab 5-2: Configuring DHCP Server Improving Redundant Switched TrunksLab 5-3: Troubleshooting VLANs and Trunks Topologies with EtherChannel Lab 5-4: Optimizing STPLab 5-4: Optimizing STP Understanding Layer 3 Redundancy Lab 5-5: Configuring EtherChannelLab 5-5: Configuring EtherChannel Troubleshooting IPv6 Network Lab 6-1: Troubleshooting IP ConnectivityLab 6-1: Troubleshooting IP Connectivity Connectivity Lab 7-1: Configuring and TroubleshootingLab 7-1: Configuring and Troubleshooting a Configuring Serial Encapsulation a Serial ConnectionSerial Connection Establishing a WAN Connection Using Lab 7-2: Establishing a Frame Relay WANLab 7-2: Establishing a Frame Relay WAN Frame Relay Lab 7-3: Establishing a GRE TunnelLab 7-3: Establishing a GRE Tunnel Introducing VPN Solutions Lab 8-1: Implementing EIGRPLab 8-1: Implementing EIGRP Configuring GRE Tunnels Lab 8-2: Troubleshooting EIGRPLab 8-2: Troubleshooting EIGRP Troubleshooting EIGRP Lab 8-3: Implementing EIGRP for IPv6Lab 8-3: Implementing EIGRP for IPv6 Implementing EIGRP for IPv6 Lab 9-1: Implementing OSPFLab 9-1: Implementing OSPF Multiarea OSPF IPv4 Implementation Lab 9-2: Configuring Multiarea OSPFLab 9-2: Configuring Multiarea OSPF Troubleshooting Multiarea OSPF Lab 9-3: Troubleshooting Multiarea OSPFLab 9-3: Troubleshooting Multiarea OSPF Examining OSPFv3 Lab 9-4: Configuring OSPF for IPv6Lab 9-4: Configuring OSPF for IPv6 Managing Cisco Devices Lab 10-1: SNMP and Syslog BasicLab 10-1: SNMP and Syslog Basic Licensing ConfigurationConfiguration Lab 1-2: Troubleshooting Switch Media Lab 10-2: Analyzing NetFlow DataLab 10-2: Analyzing NetFlow Data Issues Lab 10-3: Managing Cisco Devices andLab 10-3: Managing Cisco Devices and Lab 2-1: Performing Initial Router Setup LicensingLicensing and Configuration

Lab 2-2: Connecting to the InternetLab 3-1: Enhancing the Security of the line

line Initial Configuration Understanding the Host-to-HostUnderstanding the Host-to-Host Lab 3-2: Device Hardening Communications ModelCommunications Model Lab 3-3: Filtering Traffic with ACLs Introducing LANsIntroducing LANs Lab 4-1: Configure and Verify Basic IPv6 Operating Cisco IOS SoftwareOperating Cisco IOS Software Lab 4-2: Configure and Verify Stateless Starting a SwitchStarting a Switch Autoconfiguration Understanding Ethernet and SwitchUnderstanding Ethernet and Switch Lab 4-3: Configure and Verify IPv6 OperationOperation Routing Troubleshooting Common Switch MediaTroubleshooting Common Switch Media Lab 5-1: Configuring Expanded Switched IssuesIssues Networks Understanding IP Addressing and SubnetsUnderstanding IP Addressing and Subnets Lab 5-2: Configuring DHCP Server Understanding the TCP/IP Transport LayerUnderstanding the TCP/IP Transport Layer Lab 5-3: Troubleshooting VLANs and Exploring the Functions of RoutingExploring the Functions of Routing Trunks Configuring a Cisco RouterConfiguring a Cisco Router Lab 5-4: Optimizing STP Exploring the Packet Delivery ProcessExploring the Packet Delivery Process Lab 5-5: Configuring EtherChannel Enabling Static RoutingEnabling Static Routing Lab 6-1: Troubleshooting IP Connectivity Managing Traffic Using ACLsManaging Traffic Using ACLs Lab 7-1: Configuring and Troubleshooting Enabling Internet ConnectivityEnabling Internet Connectivity a Serial Connection Implementing Device HardeningImplementing Device Hardening Lab 7-2: Establishing a Frame Relay Implementing Traffic Filtering with ACLs Implementing Traffic Filtering with ACLs WAN Understanding IPv6Understanding IPv6 Lab 7-3: Establishing a GRE Tunnel Configuring IPv6 RoutingConfiguring IPv6 Routing Lab 8-1: Implementing EIGRP Routing Between VLANs

Page 27: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Routing Between VLANs Lab 8-2: Troubleshooting EIGRP Using a Cisco Network Device as a DHCPUsing a Cisco Network Device as a DHCP Lab 8-3: Implementing EIGRP for IPv6 ServerServer Lab 9-1: Implementing OSPF Troubleshooting VLAN ConnectivityTroubleshooting VLAN Connectivity Lab 9-2: Configuring Multiarea OSPF Building Redundant Switched TopologiesBuilding Redundant Switched Topologies Lab 9-3: Troubleshooting Multiarea OSPF Improving Redundant Switched TopologiesImproving Redundant Switched Topologies Lab 9-4: Configuring OSPF for IPv6 with EtherChannelwith EtherChannel Lab 10-1: SNMP and Syslog Basic Understanding Layer 3 RedundancyUnderstanding Layer 3 Redundancy Configuration Troubleshooting IPv6 Network ConnectivityTroubleshooting IPv6 Network Connectivity Lab 10-2: Analyzing NetFlow Data Configuring Serial EncapsulationConfiguring Serial Encapsulation Lab 10-3: Managing Cisco Devices and Establishing a WAN Connection UsingEstablishing a WAN Connection Using Licensing Frame RelayFrame Relay Introducing VPN SolutionsIntroducing VPN Solutions Configuring GRE Tunnels Configuring GRE Tunnels line Troubleshooting EIGRPTroubleshooting EIGRP Understanding the Host-to-Host Implementing EIGRP for IPv6 Implementing EIGRP for IPv6 Communications Model Multiarea OSPF IPv4 ImplementationMultiarea OSPF IPv4 Implementation Introducing LANs Troubleshooting Multiarea OSPFTroubleshooting Multiarea OSPF Operating Cisco IOS Software Examining OSPFv3 Examining OSPFv3 Starting a Switch Managing Cisco DevicesManaging Cisco Devices Understanding Ethernet and Switch LicensingLicensing Operation Lab 1-2: Troubleshooting Switch MediaLab 1-2: Troubleshooting Switch Media Troubleshooting Common Switch Media IssuesIssues Issues Lab 2-1: Performing Initial Router SetupLab 2-1: Performing Initial Router Setup and Understanding IP Addressing and and ConfigurationConfiguration Subnets Lab 2-2: Connecting to the InternetLab 2-2: Connecting to the Internet Understanding the TCP/IP Transport Lab 3-1: Enhancing the Security of theLab 3-1: Enhancing the Security of the Initial Layer Initial ConfigurationConfiguration Exploring the Functions of Routing Lab 3-2: Device HardeningLab 3-2: Device Hardening Configuring a Cisco Router Lab 3-3: Filtering Traffic with ACLsLab 3-3: Filtering Traffic with ACLs Exploring the Packet Delivery Process Lab 4-1: Configure and Verify Basic IPv6Lab 4-1: Configure and Verify Basic IPv6 Enabling Static Routing Lab 4-2: Configure and Verify StatelessLab 4-2: Configure and Verify Stateless Managing Traffic Using ACLs AutoconfigurationAutoconfiguration Enabling Internet Connectivity Lab 4-3: Configure and Verify IPv6 RoutingLab 4-3: Configure and Verify IPv6 Routing Implementing Device Hardening Lab 5-1: Configuring Expanded SwitchedLab 5-1: Configuring Expanded Switched Implementing Traffic Filtering with ACLs NetworksNetworks Understanding IPv6 Lab 5-2: Configuring DHCP ServerLab 5-2: Configuring DHCP Server Configuring IPv6 Routing Lab 5-3: Troubleshooting VLANs andLab 5-3: Troubleshooting VLANs and Trunks Routing Between VLANs TrunksLab 5-4: Optimizing STP Using a Cisco Network Device as a Lab 5-4: Optimizing STPLab 5-5: Configuring EtherChannel DHCP Server Lab 5-5: Configuring EtherChannelLab 6-1: Troubleshooting IP Connectivity Troubleshooting VLAN Connectivity Lab 6-1: Troubleshooting IP ConnectivityLab 7-1: Configuring and Troubleshooting a Building Redundant Switched Topologies Lab 7-1: Configuring and TroubleshootingSerial Connection Improving Redundant Switched a Serial ConnectionLab 7-2: Establishing a Frame Relay WAN Topologies with EtherChannel Lab 7-2: Establishing a Frame Relay WANLab 7-3: Establishing a GRE Tunnel Understanding Layer 3 Redundancy Lab 7-3: Establishing a GRE TunnelLab 8-1: Implementing EIGRP Troubleshooting IPv6 Network Lab 8-1: Implementing EIGRPLab 8-2: Troubleshooting EIGRP Connectivity Lab 8-2: Troubleshooting EIGRPLab 8-3: Implementing EIGRP for IPv6 Configuring Serial Encapsulation Lab 8-3: Implementing EIGRP for IPv6Lab 9-1: Implementing OSPF Establishing a WAN Connection Using Lab 9-1: Implementing OSPFLab 9-2: Configuring Multiarea OSPF Frame Relay Lab 9-2: Configuring Multiarea OSPFLab 9-3: Troubleshooting Multiarea OSPF Introducing VPN Solutions Lab 9-3: Troubleshooting Multiarea OSPFLab 9-4: Configuring OSPF for IPv6 Configuring GRE Tunnels Lab 9-4: Configuring OSPF for IPv6Lab 10-1: SNMP and Syslog Basic Troubleshooting EIGRP Lab 10-1: SNMP and Syslog BasicConfiguration Implementing EIGRP for IPv6 ConfigurationLab 10-2: Analyzing NetFlow Data Multiarea OSPF IPv4 Implementation Lab 10-2: Analyzing NetFlow DataLab 10-3: Managing Cisco Devices and Troubleshooting Multiarea OSPF Lab 10-3: Managing Cisco Devices andLicensing Examining OSPFv3 Licensing

Managing Cisco DevicesLicensing

line Lab 1-2: Troubleshooting Switch Media lineUnderstanding the Host-to-Host Issues Understanding the Host-to-HostCommunications Model Lab 2-1: Performing Initial Router Setup Communications ModelIntroducing LANs and Configuration Introducing LANsOperating Cisco IOS Software Lab 2-2: Connecting to the Internet Operating Cisco IOS SoftwareStarting a Switch Lab 3-1: Enhancing the Security of the Starting a SwitchUnderstanding Ethernet and Switch Initial Configuration Understanding Ethernet and Switch

Page 28: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Operation Lab 3-2: Device Hardening OperationTroubleshooting Common Switch Media Lab 3-3: Filtering Traffic with ACLs Troubleshooting Common Switch MediaIssues Lab 4-1: Configure and Verify Basic IPv6 IssuesUnderstanding IP Addressing and Subnets Lab 4-2: Configure and Verify Stateless Understanding IP Addressing and SubnetsUnderstanding the TCP/IP Transport Layer Autoconfiguration Understanding the TCP/IP Transport LayerExploring the Functions of Routing Lab 4-3: Configure and Verify IPv6 Exploring the Functions of RoutingConfiguring a Cisco Router Routing Configuring a Cisco RouterExploring the Packet Delivery Process Lab 5-1: Configuring Expanded Switched Exploring the Packet Delivery ProcessEnabling Static Routing Networks Enabling Static RoutingManaging Traffic Using ACLs Lab 5-2: Configuring DHCP Server Managing Traffic Using ACLsEnabling Internet Connectivity Lab 5-3: Troubleshooting VLANs and Enabling Internet ConnectivityImplementing Device Hardening Trunks Implementing Device HardeningImplementing Traffic Filtering with ACLs Lab 5-4: Optimizing STP Implementing Traffic Filtering with ACLs Understanding IPv6 Lab 5-5: Configuring EtherChannel Understanding IPv6Configuring IPv6 Routing Lab 6-1: Troubleshooting IP Connectivity Configuring IPv6 RoutingRouting Between VLANs Lab 7-1: Configuring and Troubleshooting Routing Between VLANsUsing a Cisco Network Device as a DHCP a Serial Connection Using a Cisco Network Device as a DHCPServer Lab 7-2: Establishing a Frame Relay ServerTroubleshooting VLAN Connectivity WAN Troubleshooting VLAN ConnectivityBuilding Redundant Switched Topologies Lab 7-3: Establishing a GRE Tunnel Building Redundant Switched TopologiesImproving Redundant Switched Topologies Lab 8-1: Implementing EIGRP Improving Redundant Switched Topologieswith EtherChannel Lab 8-2: Troubleshooting EIGRP with EtherChannelUnderstanding Layer 3 Redundancy Lab 8-3: Implementing EIGRP for IPv6 Understanding Layer 3 RedundancyTroubleshooting IPv6 Network Connectivity Lab 9-1: Implementing OSPF Troubleshooting IPv6 Network ConnectivityConfiguring Serial Encapsulation Lab 9-2: Configuring Multiarea OSPF Configuring Serial EncapsulationEstablishing a WAN Connection Using Lab 9-3: Troubleshooting Multiarea OSPF Establishing a WAN Connection UsingFrame Relay Lab 9-4: Configuring OSPF for IPv6 Frame RelayIntroducing VPN Solutions Lab 10-1: SNMP and Syslog Basic Introducing VPN SolutionsConfiguring GRE Tunnels Configuration Configuring GRE Tunnels Troubleshooting EIGRP Lab 10-2: Analyzing NetFlow Data Troubleshooting EIGRPImplementing EIGRP for IPv6 Lab 10-3: Managing Cisco Devices and Implementing EIGRP for IPv6 Multiarea OSPF IPv4 Implementation Licensing Multiarea OSPF IPv4 ImplementationTroubleshooting Multiarea OSPF Troubleshooting Multiarea OSPFExamining OSPFv3 Examining OSPFv3 Managing Cisco Devices line Managing Cisco DevicesLicensing Understanding the Host-to-Host LicensingLab 1-2: Troubleshooting Switch Media Communications Model Lab 1-2: Troubleshooting Switch MediaIssues Introducing LANs IssuesLab 2-1: Performing Initial Router Setup and Operating Cisco IOS Software Lab 2-1: Performing Initial Router SetupConfiguration Starting a Switch and ConfigurationLab 2-2: Connecting to the Internet Understanding Ethernet and Switch Lab 2-2: Connecting to the InternetLab 3-1: Enhancing the Security of the Initial Operation Lab 3-1: Enhancing the Security of theConfiguration Troubleshooting Common Switch Media Initial ConfigurationLab 3-2: Device Hardening Issues Lab 3-2: Device HardeningLab 3-3: Filtering Traffic with ACLs Understanding IP Addressing and Lab 3-3: Filtering Traffic with ACLsLab 4-1: Configure and Verify Basic IPv6 Subnets Lab 4-1: Configure and Verify Basic IPv6Lab 4-2: Configure and Verify Stateless Understanding the TCP/IP Transport Lab 4-2: Configure and Verify StatelessAutoconfiguration Layer AutoconfigurationLab 4-3: Configure and Verify IPv6 Routing Exploring the Functions of Routing Lab 4-3: Configure and Verify IPv6 RoutingLab 5-1: Configuring Expanded Switched Configuring a Cisco Router Lab 5-1: Configuring Expanded SwitchedNetworks Exploring the Packet Delivery Process NetworksLab 5-2: Configuring DHCP Server Enabling Static Routing Lab 5-2: Configuring DHCP ServerLab 5-3: Troubleshooting VLANs and Trunks Managing Traffic Using ACLs Lab 5-3: Troubleshooting VLANs andLab 5-4: Optimizing STP Enabling Internet Connectivity TrunksLab 5-5: Configuring EtherChannel Implementing Device Hardening Lab 5-4: Optimizing STPLab 6-1: Troubleshooting IP Connectivity Implementing Traffic Filtering with ACLs Lab 5-5: Configuring EtherChannelLab 7-1: Configuring and Troubleshooting a Understanding IPv6 Lab 6-1: Troubleshooting IP ConnectivitySerial Connection Configuring IPv6 Routing Lab 7-1: Configuring and TroubleshootingLab 7-2: Establishing a Frame Relay WAN Routing Between VLANs a Serial ConnectionLab 7-3: Establishing a GRE Tunnel Using a Cisco Network Device as a Lab 7-2: Establishing a Frame Relay WANLab 8-1: Implementing EIGRP DHCP Server Lab 7-3: Establishing a GRE TunnelLab 8-2: Troubleshooting EIGRP Troubleshooting VLAN Connectivity Lab 8-1: Implementing EIGRPLab 8-3: Implementing EIGRP for IPv6 Building Redundant Switched Topologies Lab 8-2: Troubleshooting EIGRPLab 9-1: Implementing OSPF Improving Redundant Switched Lab 8-3: Implementing EIGRP for IPv6Lab 9-2: Configuring Multiarea OSPF Topologies with EtherChannel Lab 9-1: Implementing OSPFLab 9-3: Troubleshooting Multiarea OSPF Understanding Layer 3 Redundancy Lab 9-2: Configuring Multiarea OSPF

Page 29: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Lab 9-4: Configuring OSPF for IPv6 Troubleshooting IPv6 Network Lab 9-3: Troubleshooting Multiarea OSPFLab 10-1: SNMP and Syslog Basic Connectivity Lab 9-4: Configuring OSPF for IPv6Configuration Configuring Serial Encapsulation Lab 10-1: SNMP and Syslog BasicLab 10-2: Analyzing NetFlow Data Establishing a WAN Connection Using ConfigurationLab 10-3: Managing Cisco Devices and Frame Relay Lab 10-2: Analyzing NetFlow DataLicensing Introducing VPN Solutions Lab 10-3: Managing Cisco Devices and

Configuring GRE Tunnels LicensingTroubleshooting EIGRPImplementing EIGRP for IPv6 Multiarea OSPF IPv4 Implementation lineTroubleshooting Multiarea OSPF Understanding the Host-to-HostExamining OSPFv3 Communications ModelManaging Cisco Devices Introducing LANsLicensing Operating Cisco IOS SoftwareLab 1-2: Troubleshooting Switch Media Starting a SwitchIssues Understanding Ethernet and SwitchLab 2-1: Performing Initial Router Setup Operationand Configuration Troubleshooting Common Switch MediaLab 2-2: Connecting to the Internet IssuesLab 3-1: Enhancing the Security of the Understanding IP Addressing and SubnetsInitial Configuration Understanding the TCP/IP Transport LayerLab 3-2: Device Hardening Exploring the Functions of RoutingLab 3-3: Filtering Traffic with ACLs Configuring a Cisco RouterLab 4-1: Configure and Verify Basic IPv6 Exploring the Packet Delivery ProcessLab 4-2: Configure and Verify Stateless Enabling Static RoutingAutoconfiguration Managing Traffic Using ACLsLab 4-3: Configure and Verify IPv6 Enabling Internet ConnectivityRouting Implementing Device HardeningLab 5-1: Configuring Expanded Switched Implementing Traffic Filtering with ACLs Networks Understanding IPv6Lab 5-2: Configuring DHCP Server Configuring IPv6 RoutingLab 5-3: Troubleshooting VLANs and Routing Between VLANsTrunks Using a Cisco Network Device as a DHCPLab 5-4: Optimizing STP ServerLab 5-5: Configuring EtherChannel Troubleshooting VLAN ConnectivityLab 6-1: Troubleshooting IP Connectivity Building Redundant Switched TopologiesLab 7-1: Configuring and Troubleshooting Improving Redundant Switched Topologiesa Serial Connection with EtherChannelLab 7-2: Establishing a Frame Relay Understanding Layer 3 RedundancyWAN Troubleshooting IPv6 Network ConnectivityLab 7-3: Establishing a GRE Tunnel Configuring Serial EncapsulationLab 8-1: Implementing EIGRP Establishing a WAN Connection UsingLab 8-2: Troubleshooting EIGRP Frame RelayLab 8-3: Implementing EIGRP for IPv6 Introducing VPN SolutionsLab 9-1: Implementing OSPF Configuring GRE Tunnels Lab 9-2: Configuring Multiarea OSPF Troubleshooting EIGRPLab 9-3: Troubleshooting Multiarea OSPF Implementing EIGRP for IPv6 Lab 9-4: Configuring OSPF for IPv6 Multiarea OSPF IPv4 ImplementationLab 10-1: SNMP and Syslog Basic Troubleshooting Multiarea OSPFConfiguration Examining OSPFv3 Lab 10-2: Analyzing NetFlow Data Managing Cisco DevicesLab 10-3: Managing Cisco Devices and LicensingLicensing Lab 1-2: Troubleshooting Switch Media

IssuesLab 2-1: Performing Initial Router Setupand ConfigurationLab 2-2: Connecting to the InternetLab 3-1: Enhancing the Security of theInitial ConfigurationLab 3-2: Device HardeningLab 3-3: Filtering Traffic with ACLsLab 4-1: Configure and Verify Basic IPv6Lab 4-2: Configure and Verify StatelessAutoconfigurationLab 4-3: Configure and Verify IPv6 RoutingLab 5-1: Configuring Expanded Switched

Page 30: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

NetworksLab 5-2: Configuring DHCP ServerLab 5-3: Troubleshooting VLANs andTrunksLab 5-4: Optimizing STPLab 5-5: Configuring EtherChannelLab 6-1: Troubleshooting IP ConnectivityLab 7-1: Configuring and Troubleshootinga Serial ConnectionLab 7-2: Establishing a Frame Relay WANLab 7-3: Establishing a GRE TunnelLab 8-1: Implementing EIGRPLab 8-2: Troubleshooting EIGRPLab 8-3: Implementing EIGRP for IPv6Lab 9-1: Implementing OSPFLab 9-2: Configuring Multiarea OSPFLab 9-3: Troubleshooting Multiarea OSPFLab 9-4: Configuring OSPF for IPv6Lab 10-1: SNMP and Syslog BasicConfigurationLab 10-2: Analyzing NetFlow DataLab 10-3: Managing Cisco Devices andLicensing

lineUnderstanding the Host-to-HostCommunications ModelIntroducing LANsOperating Cisco IOS SoftwareStarting a SwitchUnderstanding Ethernet and SwitchOperationTroubleshooting Common Switch MediaIssuesUnderstanding IP Addressing and SubnetsUnderstanding the TCP/IP Transport LayerExploring the Functions of RoutingConfiguring a Cisco RouterExploring the Packet Delivery ProcessEnabling Static RoutingManaging Traffic Using ACLsEnabling Internet ConnectivityImplementing Device HardeningImplementing Traffic Filtering with ACLs Understanding IPv6Configuring IPv6 RoutingRouting Between VLANsUsing a Cisco Network Device as a DHCPServerTroubleshooting VLAN ConnectivityBuilding Redundant Switched TopologiesImproving Redundant Switched Topologieswith EtherChannelUnderstanding Layer 3 RedundancyTroubleshooting IPv6 Network ConnectivityConfiguring Serial EncapsulationEstablishing a WAN Connection UsingFrame RelayIntroducing VPN SolutionsConfiguring GRE Tunnels Troubleshooting EIGRPImplementing EIGRP for IPv6 Multiarea OSPF IPv4 ImplementationTroubleshooting Multiarea OSPFExamining OSPFv3

Page 31: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Managing Cisco DevicesLicensingLab 1-2: Troubleshooting Switch MediaIssuesLab 2-1: Performing Initial Router Setupand ConfigurationLab 2-2: Connecting to the InternetLab 3-1: Enhancing the Security of theInitial ConfigurationLab 3-2: Device HardeningLab 3-3: Filtering Traffic with ACLsLab 4-1: Configure and Verify Basic IPv6Lab 4-2: Configure and Verify StatelessAutoconfigurationLab 4-3: Configure and Verify IPv6 RoutingLab 5-1: Configuring Expanded SwitchedNetworksLab 5-2: Configuring DHCP ServerLab 5-3: Troubleshooting VLANs andTrunksLab 5-4: Optimizing STPLab 5-5: Configuring EtherChannelLab 6-1: Troubleshooting IP ConnectivityLab 7-1: Configuring and Troubleshootinga Serial ConnectionLab 7-2: Establishing a Frame Relay WANLab 7-3: Establishing a GRE TunnelLab 8-1: Implementing EIGRPLab 8-2: Troubleshooting EIGRPLab 8-3: Implementing EIGRP for IPv6Lab 9-1: Implementing OSPFLab 9-2: Configuring Multiarea OSPFLab 9-3: Troubleshooting Multiarea OSPFLab 9-4: Configuring OSPF for IPv6Lab 10-1: SNMP and Syslog BasicConfigurationLab 10-2: Analyzing NetFlow DataLab 10-3: Managing Cisco Devices andLicensing

lineUnderstanding the Host-to-HostCommunications ModelIntroducing LANsOperating Cisco IOS SoftwareStarting a SwitchUnderstanding Ethernet and SwitchOperationTroubleshooting Common Switch MediaIssuesUnderstanding IP Addressing and SubnetsUnderstanding the TCP/IP Transport LayerExploring the Functions of RoutingConfiguring a Cisco RouterExploring the Packet Delivery ProcessEnabling Static RoutingManaging Traffic Using ACLsEnabling Internet ConnectivityImplementing Device HardeningImplementing Traffic Filtering with ACLs Understanding IPv6Configuring IPv6 RoutingRouting Between VLANsUsing a Cisco Network Device as a DHCPServer

Page 32: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Troubleshooting VLAN ConnectivityBuilding Redundant Switched TopologiesImproving Redundant Switched Topologieswith EtherChannelUnderstanding Layer 3 RedundancyTroubleshooting IPv6 Network ConnectivityConfiguring Serial EncapsulationEstablishing a WAN Connection UsingFrame RelayIntroducing VPN SolutionsConfiguring GRE Tunnels Troubleshooting EIGRPImplementing EIGRP for IPv6 Multiarea OSPF IPv4 ImplementationTroubleshooting Multiarea OSPFExamining OSPFv3 Managing Cisco DevicesLicensingLab 1-2: Troubleshooting Switch MediaIssuesLab 2-1: Performing Initial Router Setupand ConfigurationLab 2-2: Connecting to the InternetLab 3-1: Enhancing the Security of theInitial ConfigurationLab 3-2: Device HardeningLab 3-3: Filtering Traffic with ACLsLab 4-1: Configure and Verify Basic IPv6Lab 4-2: Configure and Verify StatelessAutoconfigurationLab 4-3: Configure and Verify IPv6 RoutingLab 5-1: Configuring Expanded SwitchedNetworksLab 5-2: Configuring DHCP ServerLab 5-3: Troubleshooting VLANs andTrunksLab 5-4: Optimizing STPLab 5-5: Configuring EtherChannelLab 6-1: Troubleshooting IP ConnectivityLab 7-1: Configuring and Troubleshootinga Serial ConnectionLab 7-2: Establishing a Frame Relay WANLab 7-3: Establishing a GRE TunnelLab 8-1: Implementing EIGRPLab 8-2: Troubleshooting EIGRPLab 8-3: Implementing EIGRP for IPv6Lab 9-1: Implementing OSPFLab 9-2: Configuring Multiarea OSPFLab 9-3: Troubleshooting Multiarea OSPFLab 9-4: Configuring OSPF for IPv6Lab 10-1: SNMP and Syslog BasicConfigurationLab 10-2: Analyzing NetFlow DataLab 10-3: Managing Cisco Devices andLicensing

Additional Information:

Recertification :CCNA certifications are valid for three years. To recertify, pass ONE of the following before the certification expiration date: Pass the currentICND2 exam, or Pass the current CCNA exam, or Pass the current CCDA DESGN exam, or Pass any current CCNA Concentration exam(Data Center, Wireless, Security, Voice, Video, Service Provider, or Service Provider Operations), or Pass any current 642-XXXProfessional-level exam, or Pass any current Cisco Specialist exam (excluding Sales Specialist exams or MeetingPlace Specialist exams,Implementing Cisco TelePresence Installations (ITI) exams, Cisco Leading Virtual Classroom Instruction exams, or any 650 online exams), orPass any current CCIE Written Exam, or Pass the current CCDE Written Exam OR current CCDE Practical Exam, or Pass the Cisco CertifiedArchitect (CCAr) interview AND the CCAr board review to extend lower certifications

Page 33: Cisco CCNA Routing and Switching Boot Camp (CCNAX ...store.globalknowledge.net/course-overviews/UK/CCNABC_VC_2.0_.pdf · Troubleshoot VLAN issues, explain how STP works, configure

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Further Information:

For More information, or to book your course, please call us on Head Office 01189 123456 / Northern Office 0113 242 5931

[email protected]

www.globalknowledge.co.uk

Global Knowledge, Mulberry Business Park, Fishponds Road, Wokingham Berkshire RG41 2GY UK