Cisco 360 Performance Lab

Download Cisco 360 Performance Lab

Post on 28-Apr-2015

29 views

Category:

Documents

1 download

TRANSCRIPT

Cisco 360 Learning Program for CCIE Routing and Switching

Cisco 360 Learning Program for CCIE Routing and Switching: Performance Assessment Lab (CIERS-TC-LAB02)This performance assessmentCIERS-TC-LAB02is for a challenging lab that consists of two sections: troubleshooting (CIERS-TU-LAB02) and configuration (CIERS-CA-LAB02). It is rated as one of the more difficult performance assessment labs in the Cisco 360 Learning Program for CCIE Routing and Switching. The CIERS-TC-LAB02 Performance Assessment Lab is an advanced lab that should be attempted only by learners who are comfortable with their skills or who have taken other less-intensive graded labs in the Cisco 360 Learning Program for CCIE Routing and Switching.

Duration: 8 Hours Total (2 hours for troubleshooting session, 6 hours for configuration session)Learners can schedule a Cisco 360 Performance Assessment exam using the scheduling tool on the Cisco 360 personal web portal.

Performance Assessment ObjectivesUpon completion of this performance assessment, learners should be able to meet the following objectives:

Read through a full-length Cisco CCIE lab and identify the tasks that they can easily perform Perform all these easy tasks in a given Cisco CCIE lab first, and then be able to list, prioritize, and perform the remaining tasks

Develop well-defined sets of rigorous troubleshooting and verification methods of specific and interrelated technologies Have a better understanding of the effectiveness of their problem-solving, troublleshooting, configuration, and verification methods

Performance Assessment PrerequisitesBefore performing the CIERS-TC-LAB02 Performance Assessment Lab, learners should possess a solid mastery of the core foundational Cisco CCIE topics. These topics include data link layer technologies, interior gateway protocol (IGP), route redistribution, Multiprotocol Label Switching (MPLS), and Border Gateway Protocol (BGP).

Performance Assessment OutlineThe troubleshooting session, CIERS-TU-LAB02, comprises 10 troubleshooting incidents totaling 22 points. Each incident is an isolated troubleshooting ticket that needs to be resolved in order to receive the points that are assigned to the incident. The configuration session, CIERS-CA-LAB02, comprises 14 sections. The sections and their corresponding points are as follows: Section 1: Frame Relay (2 points) Section 2: Cisco Catalyst Switch Configuration (2 points) Section 3: IPv4 OSPF Configuration (8 points) Section 4: IPv4 EIGRP Configuration (8 points) Section 5: IPv4 RIP Configuration (8 points) Section 6: Border Gateway Protocol (6 points) Section 7: MPLS Layer3 VPN (6 points) Section 8: IPv6 Routing (6 points) Section 9: Quality of Service (8 points) Section 10: Gateway Redundancy (5 points) Section 11: Security (7 points) Section 12: Multicast (4 points) Section 13: Router Configuration (3 points) Section 14: Cisco IOS Features (5 points)

All contents are Copyright 2012 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 1 of 3

Cisco 360 Learning Program for CCIE Routing and Switching

Lab TopologiesHere are the topologies that are used in the CIERS-TC-LAB02 Performance Assessment Lab: CIERS-TU-LAB02 Troubleshooting Lab TopologyInterface IP address: subnet.N, where N is Router number Example: R9 E0/0 172.16.19.9/24 Example: R28 S1/0 10.20.28.28/24E0/0

172.16.110.0/24

172.16.19.0/24

E0/0 S1/0

E0/1

E0/0

R9 R28 S1/0807 10.20.29.0/24 708 S1/0 S1/1 S1/0

R1

S1/1

R10

R29S1/0

172.16.12.0/24 300

300 172.16.13.0/24

R25E0/0

10.20.28.0/24

EIGRP AS 1S1/0

RIPv210.20.225.0/24 10.20.186.0/24

EIGRP AS 10

R27E0/0 E0/0 E0/1 E0/0 E0/1

R2E0/0

R3RIPv210.10.10.0/24 E0/0

R26OSPF Area 243

R18

R16

E0/0

10.20.127.0/24

E0/0

R13

E0/1

St ub by

10.20.118.0/24

E0/0

E0/0

To ta lly

E0/1

10.20.129.0/24

E0/3

E0/1

10.20.197..0/24

E0/0

E0/2

E0/1 E0/1

R4

R5E0/1

E0/0

R22

OSPF Area 0E0/0

R19

10.20.147.0/24

E0/0

E0/0

R17OSPF Area 0E0/0

R14

E0/1

192.168.1.0/24

OSPF Area 192E0/0 E0/0

ig Ne s or hb

R23E0/1 10.20.122.0/24 E0/0

R15 R21EIGRP AS 10hb or s Ne ig

R6E0/1 192.168.60.0/24

R7E0/1

Totally Stubby10.20.224.0/24

OSPF Area 0192.168.70.0/24 E0/0

OSPF Area 33E0/0 10.20.140.0/24 10.20.141.0/24 10.20.142.0/24 10.20.143.0/24 E0/0

Totally Stubby192.168.26.0/24E0/0 E0/2 E0/1 E0/0

R11

R24

R20

R12

R8

OSPF Area 60

All contents are Copyright 2012 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 2 of 3

Education Data Sheet

CIERS-CA-LAB02 Configuration Lab TopologyLo193:106.193/30 Lo197:106.197/30 Lo201:106.201/30 Lo205:106.205/30

Lo111:1.1.1.1/24

OSPF Area 30Lo196:196.1/24 Lo200:200.1/24 Lo204:204.1/24

Lo10:10.1.118.100/24

R6R6:E:0 16.6/24

R6:E:0 26.6/24 214.10/24 VLAN20 26.20/24

EIGRP AS40VLAN50

OSPF Area 30214.20/24 VLAN30

OSPF Area 0VLAN10 16.1/24 R1:E:1

21.20/24

21.1/24 R1:E:1 14.1/24

214.4/24

OSPF Area 14104 401

R4:E:1 14.4/24 R4:S:0

OSPF Area 104Lo104:104.1/24

Lo101:101.1/24

OSPF Area 101

R1R1:E:1 12.1/24

R1:S:0 R1:S:0 231.1/24

R4R4:S:0 43.4/24

102 VLAN60

RIPv2201 12.2/24 R2:E:0 Lo102:102.1/24 231.2/24 R2:S:0

403

OSPF Area 0

304

R2R2:E:0 52.2/24 10.1.1.1/24 VLAN100 R3:E:0 10.1.1.1NX/24 43.3/24 R3:S:0

OSPF Area 103Lo103:103.1/24

R3R3:E:1 37.3/24

VLAN70 TRAFFIC GENERATOR

VLAN40 52.5/24 R5:E:0 Lo105:105.1/24 R5:E:0 150.100.10.100/24

OSPF Area 3737.7/24

R5

150.100.10.2NX/24

VLAN150

FTP Server

For More InformationFor more information about the Cisco 360 Learning Program for CCIE Routing and Switching, go to http://www.cisco.com/go/360. The learning portal for the Cisco 360 Learning Program for CCIE Routing and Switching is available at http://cisco360.cisco.com.

Printed in USA

C78-331727-01 03/08

All contents are Copyright 2012 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 3 of 3