ci 40 paper catch basket assembly instructions
DESCRIPTION
Can Be useful for Installation of Colortrac Smart LF Ci 40 Scanner.TRANSCRIPT
-
Assembly Instructions SmartLF Ci 40 Paper Catch Basket Option P005315 DOCUMENT P/N: P005502
PAS 173 Colortrac Ltd 2008
!"#$""%
&$""%
Colortrac HQ and Factory3-5 Brunel CourtBurrel RoadSt IvesCambsPE27 3LWUK
United Kingdom
Tel: +44 (0) 1480 464618Fax: +44 (0) 1480 464620 www.colortrac.com [email protected]
ASSEMBLY INSTRUCTIONS FORPAPER CATCH BASKET OPTIONP/N:P005315 (requiresP005310)
(ACCESSORY)
www.colortrac.com
-
Assembly Instructions SmartLF Ci 40 Paper Catch Basket Option P005315 DOCUMENT P/N: P005502
PAS 173 Colortrac Ltd 2008
ASSEMBLY INSTRUCTIONSFOR THE Ci 40 PAPER CATCH
BASKET OPTION P005315
1.
(ASSUMES PRE-ASSEMBLY OF SMARTLFCi 40 FLOOR STAND P/N: P005310)
3.
2. PARTS LIST AND TOOLS
PARTS IDENTIFICATION
4.
P4
5. 6.
7. 8.STEP 1 - ATTACH ONE CURTAIN
BRACKET FRONT SUPPORTS (P2) TOEACH FLOOR STAND LEG FRONT USINGTHE P4 BOLTS (2 BOLTS PER BRACKET)
MAIN ASSEMBLY
STEP 3 INSERT POLES P7 & P8INTO THE CURTAIN THEN LOCATEP7 (LONG BAR) ONTO THE FRONT
BRACKETS AND P8 ONTO THEREAR BRACKETS
Colortrac HQ and Factory3-5 Brunel CourtBurrel RoadSt IvesCambsPE27 3LW
United Kingdom
Tel: +44 (0) 1480 464618Fax: +44 (0) 1480 464620 www.colortrac.com [email protected]
P6
x2
X4
X4
P2
x2
P3
P1
P7 P8
550 MM
757 MM
1100 MM
P2
P4
SIDE VIEW(RIGHT-HAND)
VIEW FROM REAR
TOOLS NEEDED FOR ASSEMBLYCROSSPOINT SCREWDRIVER - MEDIUMCROSSPOINT SCREWDRIVER - LARGE
PART DESCRIPTION QTYP1 PRE-SLOTTED BASKET CURTAIN 1P2 CURTAIN BRACKET FRONT 2P3 CURTAIN BRACKET REAR 2P4 SMALL CHEESE HEAD BOLT 4P5 SMALL SPRING WASHERS 4P6 LARGE CHEESE HEAD BOLT 4P7 CURTAIN BAR (LONG) 1P8 CURTAIN BAR (SHORT) 1
P5
STEP 2 - ATTACH ONE CURTAINBRACKET REAR SUPPORT (P3) TO EACHFLOOR STAND FOOT REAR USING THE
P6 BOLTS (2 BOLTS PER BRACKET)
P3
P6
IMPORTANT - RE-MOUNT THESCANNER ONTO THE FLOOR STANDTHROUGH THE REAR HOLES USINGTHE TWO LONG BOLTS PROVIDED
(FLOOR STAND FIXINGS KIT)RE-CHECK ALL BOLTS FOR
TIGHTNESSFRONT
P7
P8