pdfcrowd.comPRO version Are you a developer? Try out the HTML to PDF API

USER MANUAL for theShooting Chrony BALLISTIC PRINTER™ Model CBP-8TE

. The SHOOTING CHRONY BALLISTIC PRINTER™ works withall Shooting Chrony Models and all Master Chrony Models,manufactured and sold since January 1, 2000, and, starting withSerial # 157288.

The following Chrony Models manufactured and sold prior to thatdate and Serial number also work with the CHRONY PRINTER:The Alpha, Beta and Gamma Shooting Chronys and therespective MasterChrony Models.

To operate the BALLISTIC CHRONY PRINTER, it must beconnected to one of the above Chrony chronographs.

To do this, the PRINTER comes with a 16 ft. interface cable (4 ft.with Master Chrony Models). Connect it to the Stereo Jacks ofthe Chrony and PRINTER. Your CHRONY PRINTER will printvelocities as measured by the Chrony and print statistics suchas : Lo, Hi, Average velocities, Extreme Spread and StandardDeviation. Your CHRONY PRINTER can do this in two ways:

1. Print as you shoot: In PRINT MODE (left light on): It will print shot number and velocities as youshoot across the Chrony. When done shooting a string of shots, press the STAT button, and thePRINTER will print the statistics of the string just fired.

pdfcrowd.comPRO version Are you a developer? Try out the HTML to PDF API

2. 2) Print from Chrony memory: In the P/NP MODE (left light on): By pressing the STAT/VEL button:It prints statistics first, and then shot numbers and velocities in reverse order; i.e. it will print the lastshot first and the first shot last from data stored in Chrony memory. FEED button: to feed paper continuously; TEST/ON button: will turn PRINTER ON and test the availability of battery power. If the PRINTERprints slow or, if PRINTER keeps printing on one spot, batteries are getting low. OFF button: willturn PRINTER OFF and reset communications and software on PRINTER.

The CHRONY PRINTER comes with 6-VoltAC Adapter (500mA), that runs from 120 Voltshouse current. It can also work with 4 (AA)Batteries (NOT INCLUDED).

Make sure Printer power is OFF whenconnecting or disconnecting the adapter.

This paper should be fed into the printing element by sliding it at the bottom of the PRINTER towards theprinting element. Be patient. When paper comes to a stop, hold it there and push the FEED button. Whenfed correctly, the printing mechanism will pull the paper through the printing element

TO GET STARTED

1. Make sure PRINTER and CHRONY are turned off;2. Mount CHRONY on a tripod (or table) and place PRINTER within easy reach anywhere on the

shooting bench;

pdfcrowd.comPRO version Are you a developer? Try out the HTML to PDF API

3. Connect PRINTER and CHRONY with interface cable;4. Keep in mind, that the FU (Function) button and the ST (String) button on the PRINTER have the

same function as the FU and ST buttons on the BETA and GAMMA CHRONYS. By connecting thePRINTER to the CHRONY, both are now interfaced, and the PRINTER can be used in place of aREMOTE CONTROL.

By pushing the ST button, one moves one String up. However, by doing so,the PRINTER will haveswitched itself into the NO PRINT-mode and the light on the left hand side will be off and it will notprint the String Number and the number of shots. To get back into the PRINT-mode, push the P/NPbutton; the light on the left hand side will come on, and the PRINTER will be in PRINT-mode again. To avoid the above situation, one can get better results by pushing the OFF and STAT buttonssimultaneously to move to the next higher String. To move to the next lower String, push theSTAT/VEL and the P/NP buttons simultaneously or at the same time. By doing this, the PRINTERwill print the String Number as well as the number of shots on that particular String.

5. The NO PRINT-mode is used, when reviewing velocities and statistics with the FU button but,without activating the PRINTER

6. The F-1 Chrony has no FU or ST buttons. Reviewing velocities and statistics with the F-1 Chronycan only be done with a Remote Control or,with the FU button of the PRINTER. The Alpha Chronyhas no ST button. To start a new String, both Models have to be turned off first and then on again.

7. When preparing the set-up, follow safety instructions as explained in USER MANUAL of yourCHRONY chronograph.

ACTUAL USE

1. Connect the CHRONY to the PRINTER, using the Interface Cable.2. Turn CHRONY "ON";3. Push the TEST/ON button to turn the PRINTER "ON". (right light will come on );4. Push the PN/P button on PRINTER (left light will come on);5. Start shooting. Do not shoot faster than PRINTER can print. If you do, it will skip printing velocities.6. To print statistics, push the STAT button.7. To print velocities and statistics from CHRONY-PRINTER memory, press STAT/VEL button and

PRINTER will print statistics first and then velocities: printing last velocity first and first velocity last8. To review velocities and statistics before printing , press & release the FU button. To delete

pdfcrowd.comPRO version Are you a developer? Try out the HTML to PDF API

unwanted shot-velocities and many more functions, look up the instruction manual of your Chrony9. When done printing, tear off print-out and staple to target or file. The printing was done on real paper

and therefore will last indefinitely. This is now a document, providing a permanent record.

Battery Operation Be sure that + and - poles of each battery are facing in the right direction.NOTE the following to avoid battery leakage and damage to the unit:

Never mix different battery types;Don’t mix old batteries with new ones;Never leave dead batteries installed in the unit;Remove batteries when you have no plans to use the PRINTER for a long time;Do not expose batteries to heat; do not let them become shorted; do not try to take them apart;Use Alkaline batteries for better results;(Should batteries start to leak, clean out the battery compartment; Avoid battery fluid to come indirect contact with skin.)

Replacing Ink Roller (IR-40) When the ink roller needs to be replaced, purchase an IR-40/IR-30 ink roller from your nearest Casiodealer.

LEGEND#97531.86420t When turning the Printer on by pushing the TEXT/ON button, the Printer will print this

test score.#02215053170x Please note: When disconnecting the Printer from the Chrony while Printer is in the

TEST/ON mode, when reconnecting Printer and Chrony, the Printer Will also be in the TEST/ONmode. Likewise: If Printer has been turned OFF when disconnecting Cable, it will bein the OFF mode when re-connected.

pdfcrowd.comPRO version Are you a developer? Try out the HTML to PDF API

#11 0000.00 Err 1; Front sensor (on Chrony) did not detect Projectile;#21 0000.00 Err 2; Rear sensor did not detect projectile;# 120 C Error in communication; Check if Interface Cable is fully connected

# 00 C After 5 minutes of non-use, the Printer will first print this and then turn itself off; willalso be printed when Printer is turned off manually.

Below: See actual print-out when in use.#1 111.02 #2 107.48 Numbered shots in feet/sec. or, FPS

#3 109.76 ---------------------------C

#17 $ String Number107.48 - Lo velocity111.02 + Hi velocity109.42 * Average velocity

3.54 C Extreme Spread between Hi and Lo velocities;2.00 D Standard Deviation (the actual print-out shows a Diamond.)#27 Total shots fired since Chrony was last turned on;

.....................................C----------------------------C#1 117.74M The letter M indicates that the Chrony is in

#2 119.71M metric mode and velocities are printed in Meter/sec. or MPS.

pdfcrowd.comPRO version Are you a developer? Try out the HTML to PDF API

SHOOTING CHRONY INC. warrants each CHRONY BALLISTIC PRINTER manufactured by us to be freefrom defect in workmanship or material under normal use and service for a period of one year from date ofpurchase to the original purchaser. Obligation under this warranty is limited to replacing by SHOOTINGCHRONY INC. any part or parts thereof which shall, upon examination, prove to be defective. This warrantyshall not apply to batteries or any unit which has been subject to misuse, negligence or accident.Disassembly of the PRINTER will void any warranty. SHOOTING CHRONY INC. reserves the right to make changes, additions or improvements upon itsproducts with no obligation to install same upon its products heretofore manufactured. When returning PRINTER for repairs, please include a copy of bill of purchase. Should you have to return your PRINTER because of malfunction, do NOT return it to the Dealer,Distributor or Mail-Order house you bought it from. It must be returned directly to SHOOTING CHRONY INC.

U.S. Residents, please return your PRINTER to:

SHOOTING CHRONY INC.3840 East Robinson Rd., PMB # 298

pdfcrowd.comPRO version Are you a developer? Try out the HTML to PDF API

Amherst, NY 14228

CANADIAN Residents and other, non U.S. Residents, please return your PRINTER to:

SHOOTING CHRONY INC.2446 Cawthra Rd., Bldg.1, Unit 10Mississauga, Ontario, CANADAL5A 3K6

E-Mail: chrony@shootingchrony.com Web-Site: http://www.shootingchrony.com

For more information please call: Tel.: l-(905) 276-6292Fax: 1-(905) 276-6295

If it doesn'tunfold, it'snot aChrony®

Copyright © 1997-2009Last updated: July, 2009Pricing effective: · E. & O. E.