choosing the suitable mask for your task face-fit … · martcare® p3v beh130-001-000 srp £1.96...
TRANSCRIPT
FACE-FIT TESTING
GUIDE TO MASK FEATURES ICONS
CHOOSING THE SUITABLE MASK FOR YOUR TASKIf the seal between the respirator and the wearer’s face is not sufficient, contaminated air will pass through any gaps in the seal. A poor fitting respirator will reduce the level of protection it offers. Fit testing is a way to check that a respirator face-piece matches a person’s facial features and seals sufficiently to their face.
WHAT FACTORS AFFECT FIT?Faces vary widely in shape, size and proportions and it is unlikely that one particular model of respirator will fit everyone. Other factors affecting the fit are:
• Facialhair–wearersoftightfittingrespirators should be clean shaven in the areas of contact with the respirator.
• Eyewear–bothprescriptionspectaclesand safety eyewear affect the fit and if worn, should be worn during a fit test.
• Jewellery–intheareaofthefacesealwillprobably need to be removed.
WHICH RESpIRATORS REqUIRE FIT TESTING?Tight Fitting Respirators, including:
•DisposableRespirators
•ReusableHalfMasks
•ReusableFullFaceMasks
WHO NEEDS FIT TESTING?Anyone whose job requires the use of a tight fitting respirator, unless they are used for comfort only, when the level of exposure is belowtheWorkplaceExposureLimit(WEL).
WHEN SHOULD FIT TESTING BE CONDUCTED? Ideally when selecting Tight Fitting Respirators, but most importantly before an individual wears the respirator in a hazardous environment. If an untested face-piece is already in use it should be fit tested as soon as possible. The test should be repeated at regular intervals or if:
•Thewearersignificantlychangesweight
•Aftermajordentalworkorfacialinjury
•Achangeinrespiratortypeorsize
WHO SHOULD CONDUCT FIT TESTING?Fit testing should be conducted by a competent person with adequate knowledge of fit testing and should have some practical experience. They could also be an accredited fit tester who has been tested by the “Fit2Fit RPEFitTestProvidersAccreditationScheme”.
For more information please visit: www.fit2fit.org
qUALITATIvE FACE FIT TEST KITKit includes: •1Hood•1Collar•2Nebulizer(1Sensitivity,1FitTest)•2BottlesofSolution (1Sensitivity,1FitTest)•1InstructionManual•10TestReportforms
BPT050-000-000 Qualitative Face Fit Test Kit Qty1
BPT060-000-000 QualitativeFaceFitTestHoods(Pk5) Qty1
BPT070-000-000 QualitativeFaceFitNebulisers(Pair) Qty1
BPT080-000-000 QualitativeFaceFitSolution(Pair) Qty1
WE OFFERFIT TESTING FROM ONE OF OUR ACCREDITED TESTERS
EFFICIENCY CONSTRUCTIONDUSTS METALFUMES FIBRES WOODS PAInTIng
FiltrationEfficiency
Anti-Clogging(D)
Silica
BrickDust
Concrete
Plas
ter
Sandstone
Wel
ding
FerrousMetalFum
e
LeadFum
e
FibreGlassStrand
MineralFibres
Rock
woo
l Ins
ulat
ion
WoodSoft
WoodHard
MDFHandTools
Wat
er B
ased
Pow
ered
Pre
p
ManualPrep
Mechanical Stripping
FFp3vHighefficiency
with Valve99%
FFp2OvMediumefficiencyodour carbon layer
with Valve
94%
FFp2AvMediumefficiencyacid carbon layer
with Valve
94%
FFp2vMediumefficiency
with Valve94%
FFp2Mediumefficiency
94%
FFp1vLowerefficiency
with Valve80%
FFp1OvLowerefficiency
odour carbon layer with Valve
80%
FFp1Lowerefficiency
80%
ANTI-CLOGGING (D)MaskswiththeDmarkinghavepassedtheDolomitetest meaning that they are able to resist clogging in very fine dust environments.
TYpHOON vALvE (v)Siliconediaphragmwhichisnotaffectedbymoisture.Fully shrouded to ensure optimum protection from dust. Classleadinglowexhalationresistance.
INNER COMFORT LAYERFoam padding on the inside of mask helps improve face fit and offers extra comfort for the wearer especially over prolonged periods of use.
CAGED vALvE (v) Modernshroudedvalvecoverwithcagestyledesigntoensure low breathing resistance while protecting from dust.Utiliseslatexfreethermoplasticrubberdiaphragm.
ACID CARBON LAYER (A)Incorporated to the mask for protection against organicvapoursandgasesbelowOEL.Neutralisesuncomfortable smells.
TRADITIONAL vALvE (v)Traditional style valve to reduce build-up of moisture fromexhaledair.Latexfreethermoplasticrubberdiaphragm.
ODOUR CARBON LAYER (O)Incorporated to the mask for protection against organicvapoursandgasesbelowOEL.Neutralisesuncomfortable smells.
4-pOINT HARNESS (v) A 4-point rigid harness built into the mask can be used to create an optimum fit and therefore offer greater overall efficiency.
ADJUSTABLE NOSE pIECEEnablesthemasktobefittedaroundthenoseprofileaiding face fit - important when there is no inner comfort layer.
www.jsp.co.uk [email protected] UK tel: +44 1993 826050
JSP LTD Worsham Mill, Minster Lovell, Oxford, OX29 0TA, England Tel: +44 (0)1993 826050 Fax: +44 (0)1993 824411 [email protected] [email protected] www.jsp.co.uk Issued: 05/14 ©Copyright JSP Ltd 2014. All Rights Reserved EUROPEAN
MANUFACTURERMANUFACTURING FOR A SAFER FUTURE
50YEARS
1964 2014
MANUFACTURING FOR SAFETY
DISpOSABLE MASK GUIDE
*Wel (Workplace exposure Level)- This table is for guidance purposes only. A proper risk assessment by qualified personnel should be carried out before selecting an appropriate filter cartridge.
FFp3 vALvED FFp2 vALvED FFp2 ODOUR vALvED FFp2 ACID vALvED FFp2 FFp1 vALvED FFp1 ODOUR vALvED FFp1
735 TYpHOON™BEK136-101-000 SRP£3.65PerUnitPkQty5
725 TYpHOON™BEP120-001-000 SRP£1.69PerUnitPkQty10
726 TYpHOON™BEP150-001-000SRP£2.49PerUnitPkQty10
727 TYpHOON™BEP160-001-000 SRP£2.49PerUnitPkQty10
335 TYpHOON™BEY130-201-000SRP£4.30PerUnitPkQty10
325 TYpHOON™BEY120-201-000 SRP£2.14PerUnitPkQty10
326 TYpHOON™BEY150-201-000SRP£3.22PerUnitPkQty10
315 TYpHOON™BEY110-201-000 SRP£1.60PerUnitPkQty10
832 FLExINET™BER130-001-000 SRP£4.30PerUnitPkQty5
822 FLExINET™BER122-201-000 SRP£2.14PerUnitPkQty10
823 FLExINET™BER152-201-000 SRP£3.22PerUnitPkQty10
821 FLExINET™BEQ122-201-000 SRP£1.60PerUnitPkQty10
132 OLYMpUS®
BEK130-001-000 SRP£2.90PerUnitPkQty5122 OLYMpUS®
BEK120-001-000 SRP£1.07PerUnitPkQty20123 OLYMpUS®
BEK150-001-000 SRP£1.82PerUnitPkQty20121 OLYMpUS®
BEJ120-001-000 SRP£0.85PerUnitPkQty20112 OLYMpUS®
BEK110-001-000 SRP£0.96PerUnitPkQty20113 OLYMpUS®
BEK140-001-000 SRP£1.71PerUnitPkQty20111 OLYMpUS®
BEJ110-001-000 SRP£0.63PerUnitPkQty20
232 OLYMpUS® FFBEB130-101-000 SRP£2.36PerUnitPkQty10
222 OLYMpUS® FFBEB120-101-000 SRP£1.07PerUnitPkQty10
223 OLYMpUS® FFBEB150-101-000 SRP£1.82PerUnitPkQty10
221 OLYMpUS® FFBEA120-101-000 SRP£0.85PerUnitPkQty20
212 OLYMpUS® FFBEB110-101-000 SRP£0.96PerUnitPkQty10
211 OLYMpUS® FFBEA110-101-000 SRP£0.63PerUnitPkQty20
MARTCARE® p3vBEH130-001-000 SRP£1.96PerUnitPkQty5
MARTCARE® p2vBEH120-001-000 SRP£0.64PerUnitPkQty10
MARTCARE® p2BEG120-001-000SRP£0.49PerUnitPkQty20
MARTCARE® p1BEH110-001-000SRP£0.56eachPKQty20
MARTCARE® p1BEG110-001-000 SRP£0.39PerUnitPkQty20
OLYMpUS® SERIES
MARTCARE®
HIGH qUALITY FILTERING MATERIAL
ERGONOMICALLY SHApED
COST EFFECTIvE
FLExINET™
IMpROvED FACE SEALFLExIBLE pROTECTIvE COvER
Ergonomic3Ddesigntofitmostfaceshapes, Flexinet™ has extremely low inhale breathing resistance due to the mask’s design and protective shield. Conformsto:EN149:2001+A1:2009
Available as moulded or fold flat the Olympus® range of disposable masks use high quality filtering material layers, and the colour coded valve products increaseusercomfortbyloweringC02and heat build up. Adjustable nose piece for creating perfect fit around the wearer’s nose. Conformsto:EN149:2001+A1:2009
A cost effective solution for construction and industry with fit for purpose the main consideration.JSPdoesnotcompromiseonitsrigorous batch testing procedures, ensuring thataMartcare®maskgoesthroughthesamedisciplinesastherestoftheJSPrange. Conformsto:EN149:2001+A1:2009
TYpHOON™
TESTED TO -40°360° COMFORT FOAM
LOW BREATHING RESISTANCE
A range of moulded and fold flat masks for a wide range of tasks. The range features the unique Typhoon™ Valve for extremely low exhale breathing resistance for extremelylowCO2 and heat build-up, and extremely low moisture build up. Conformsto:EN149:2001+A1:2009
Typhoon valve technology built in
SpIROTEK BY JSp
SpIROTEK BY JSp
SpIROTEK BY JSp
SpIROTEK BY JSp