choosing the right insulation - g & s home …...enovate ® blowing agent (hfc-245fa) is the...
TRANSCRIPT
Closed-Cell Spray Foam Insulation
Choosing the right insulation
At-a-Glance: Closed-Cell Spray Foam vs. Other Wall Cavity Insulations
Features
Closed-CellPolyurethaneSpray Foam(ccSPF)
Open-CellPolyurethaneSpray Foam(ocSPF)
Fiberglass Batts
Fiberglass Loose-Fill
Wet-SprayedCellulose
Blown-in (Dry)Cellulose
Mineral Wool
Commonly-accepted R-value at 1 inch1
6.2 3.6 3.7 3.2 4.0 4.0 3.9
Will not distort framing when properly installed2
Does not contain formaldehyde3
Won’t shrink or settle overtime when properly installed
Expands to fill hard-to-reachspaces
Efficiently reduces soundtransmission through walls4
Certified air barrier5
Moisture resistant (FEMAapproved)6
Serves as a vapor retarderwithout additional materials7
Increases structuralstrength8
1. The higher the R-value, the greater the insulating power. Ask your seller for the fact sheet on R-values.2. No insulation product should distort framing when properly installed. Always make sure your contractor is qualified for your job regardless of the type
of insulation being used.3. Fiberglass batts and mineral wool may contain formaldehyde. Check with the manufacturer.4. Consult manufacturer’s literature.5. When a minimum of 1" is applied, closed-cell SPF qualifies as an air barrier according to ASTM E-2178 which is the test used by the Air Barrier
Association of America (ABAA) to define an air barrier. To Honeywell’s knowledge, no open-cell SPF product has passed this test.6. Closed-cell spray foam is the only insulation classified as an “acceptable flood resistant material” by FEMA. FEMA Technical Bulletin 2-93.7. Two inches of closed-cell SPF qualifies as a 1 perm vapor retarder according to ASTM E-96. Perm ratings vary by manufacturer; please consult
manufacturer literature.8. NAHB, “Testing and Adoption of Spray Polyurethane Insulation for Wood Frame Building Construction”, 5-25-92.
An exceptional thermal insulator, closed-cell spray foam boasts a number of additional benefits not found in other types of insulation.
Qualities unique to closed-cell spray foam include: air barrier certification†, moisture resistance and increased structural strength.
Honeywell is the leading supplier of blowing agents for closed-cell foam insulation and has been at the forefront of every major
improvement in blowing agent technology. Spray foam insulation formulated with non-flammable, non-ozone depleting Honeywell
Enovate® Blowing Agent (HFC-245fa) is the best proven technology available. Review the table below to help you choose the right
insulating material for your home or building.
† www.airbarrier.org
Honeywell Performance Materialsand Technologies
Honeywell Fluorine Products
101 Columbia Road
Morristown, NJ 07962-1053
Phone: 1-800-951-1527
www.honeywell.com/enovate12-03-EBA
October 2012Printed in U.S.A.© 2012 Honeywell International Inc
Disclaimer: All statements, information and data given herein arebelieved to be accurate and reliable but are presented without guar-anty, warranty or responsibility of any kind, expressed or implied.Statements or suggestions concerning possible use of our productsare made without representation or warranty that any such use isfree of patent infringement and are not recommendations to infringeany patent. The user should not assume that all safety measures areindicated, or that other measures may not be required.
Enovate is a registered trademark of Honeywell International Inc.