chooch will be releasing many new available welcome to the ... · welcome to the new world of...
TRANSCRIPT
Back SideFront side
final packaging size
2 per sheet
8.5 x 14 sheet master sheet
90 lb paper gloss Print 12,000 pieces.
4 color both sides
final cut size 4.125 x 13.5 inches
score at 1” to fold from back to front side
The Best in Miniature Modeling
tki
Come visit our website and see our whole line!
#8500 Small Cribbing HO/N
#8502 Medium Cribbing HO
#8504 Large Cribbing HO/O
Actual Sizes
www.ChoochEnterprises.com
Score at 1” from top folding from back to front side#8250 Small Random Stone Wall
(Sheet size: 3.5” x 13”)
#8252 Medium Random Stone Wall
(Sheet size: 3.25” x 14”)
#8254 Large Random Stone Wall
(Sheet size: 3.5” x 13”)
#8260 Small Cut Stone Wall
(Sheet size: 3.4” x 13”)
#8262 Medium Cut Stone Wall
(Sheet size: 3.4” x 13.25”)
#8264 Large Cut Stone Wall
(Sheet Size: 3.5” x 13.75”)
Check out our flexible stone walls!
Wet Climate
Dry Climate
Mild Climate
You can use acrylic washeswith soapy water. Note thecolor suggestions, dependingon your model’s climate.
Choose the size you need. Below is a rough illustration of each wall. Each wall can be used in ANY scale, since dif-ferent walls are used for various structural applications.
Welcome to the new world of creative
model building using our new flexible
tooling by Chooch. You will find our
products incredibly easy to use and
fun to make things that used to take
hours to scratch build. Over time,
Chooch will be releasing many new
products to make your hobby more
creative.
This vinyl material is easy to cut
with scissors or with #11 modeler’s
blade. You can also create corners
by scoring the front and bending
the casting from the back allowing
the vinyl to stay attached.
Your wall comes with a permanent
“peel and stick” backing material.
Peel the backing paper after you
have cut the shape you need. It
is very important that you do NOT
touch the adhesive with your fin-
gers, because the oils from our
skin inhibits the adhesive bond.
Depending on your humidity and
climate, if you feel the bond will
not permanently stay, we recom-
mend you apply ordinary contact
cement to the top or bottom of
the casting. You can mount the
piece on hardboard, pink foam or
dry wood, making sure the surface
it dry and clean.
OK to print the width of each piece at 4.10 inches if you need to fit it on page.
Please send Proof prior to printing.
Your wall comes with a base coat.
You can change the color or use
it as it comes. Depending on the
climate you are modeling, you can
change the color by “washing” the
casting with acrylic paints. We
like the Americana Brand you find
in craft stores. It’s a matter of
“playing” with colors to get what
you like. Only use water base
acrylic paints.
Recipe for washing color:
Soapy water: 3 drops dish soap
to 1 quart of water.
Dilute paint 1 part to 4 parts
soapy water.
You can apply a dark color over
the whole design, let dry, and
then apply a light color over the
whole design. OR reverse this
order of color. Either way, you
get a different effect.
Acrylic paints usually dry darker
so you may want to go easy at
first.
You can always wash off the
color before it dries.
Above all, have fun and don’t be
afraid to experiment with color.
As time goes on, please check
out the Chooch website to see
video painting tips and trials.
www.ChoochEnterprises.com
Use only water-base paints.
Do NOT use alcohol-base
or oil base paints.
Chooch Guarantee
It’s our goal to make a product
that works well for you and
enhances your modeling experi-
ance. If you make any mistakes,
let us know and we will try our
best to replace a Chooch product.
And if you have any thoughts of
products you need, let us know.
CHOOCH FLEXIBLE PRODUCT INSERT
GOOGLE KEY WORD: CHOOCH
Scan Here
Chooch Website
Available at all Hobby Stores!
COAL Minutes to make
Make your own Coal Loads! Comes in 3 Grades! Molded in Flexible Vinyl
Standard Sheet Size:
3.75” x 12”
Textured Coal Sheets
Fits all Scales!
# 8708 Small Grade
# 8710 Medium Grade
# 8712 Large Grade
Flexible!1
2
3 4
4
Make a Styrene insert
Make a clay mound
Zap the vinyl edge Trim with Scissors
Easy Steps
See the Video:
Make for ANY
Freight Car
NEW!
Available at all Hobby Stores!
COAL
Minutes
to Make
Make your own Coal Loads! Comes in
3 Grades! Molded in
Flexible Vinyl
Standard Sheet
Size: 3.75” x 12”
Textured Coal
Sheets
Fits all Scales!
Flexible!
See the Video:
Fits ANY
Freight Car
Scan Here
Chooch Website
# 8708 Small Grade (1 sheet)
#8708-2 (2 sheets)
# 8710 Medium Grade (1 sheet)
#8710-2 (2 sheets)
# 8712 Large Grade (1 sheet)
#8712-2 (2 sheets)
Great for
Steam Tenders
No Loose
Coal
4Easy Steps
1
2
3
4
Make a Styrene insert
Hot Glue steel shapes
Hot Glue the edges
Trim with Scissors
Measure the inside of the car and cut a styrene
insert to fit inside the car. Leave a little room to
allow the load to be magnetically removed.
Find some washers or nuts and Hot Glue the steel parts
to make a shape for the mounds of coal.
Glue the edges using low heat Hot Glue and press down
with your fingers until the glue cools. You can also run
a bead of Super Glue along the edge to seal the bond.
Trim the excess vinyl with scissors following the styrene
edge. Now test fit the load to the car and try a magnet
to “unload” the coal from the car. Look at the Video too.
Available at all Hobby Stores!
COAL
Minutes
to Make
Make your own Coal Loads! Comes in
3 Grades! Molded in
Flexible Vinyl
Standard Sheet
Size: 3.75” x 12”
Textured Coal
Sheets
Fits all Scales!
Flexible!
See the Video:
Fits ANY
Freight Car
Scan Here
Chooch Website
# 8708 Small Grade (1 sheet)
#8708-2 (2 sheets)
# 8710 Medium Grade (1 sheet)
#8710-2 (2 sheets)
# 8712 Large Grade (1 sheet)
#8712-2 (2 sheets)
Great for
Steam Tenders
No Loose
Coal
4Easy Steps
1
2
3
4
Make a Styrene insert
Hot Glue steel shapes
Hot Glue the edges
Trim with Scissors
Measure the inside of the car and cut a styrene
insert to fit inside the car. Leave a little room to
allow the load to be magnetically removed.
Find some washers or nuts and Hot Glue the steel parts
to make a shape for the mounds of coal.
Glue the edges using low heat Hot Glue and press down
with your fingers until the glue cools. You can also run
a bead of Super Glue along the edge to seal the bond.
Trim the excess vinyl with scissors following the styrene
edge. Now test fit the load to the car and try a magnet
to “unload” the coal from the car. Look at the Video too.
See the Video: GOOGLE KEY WORD: CHOOCH
Available at all Hobby Stores!
COAL
Minutes
to Make
Make your own Coal Loads! Comes in
3 Grades! Molded in
Flexible Vinyl
Standard Sheet
Size: 3.75” x 12”
Textured Coal
Sheets
Fits all Scales!
Flexible!
See the Video:
Fits ANY
Freight Car
Scan Here
Chooch Website
# 8708 Small Grade (1 sheet)
#8708-2 (2 sheets)
# 8710 Medium Grade (1 sheet)
#8710-2 (2 sheets)
# 8712 Large Grade (1 sheet)
#8712-2 (2 sheets)
Great for
Steam Tenders
No Loose
Coal
4Easy Steps
1
2
3
4
Make a Styrene insert
Hot Glue steel shapes
Hot Glue the edges
Trim with Scissors
Measure the inside of the car and cut a styrene
insert to fit inside the car. Leave a little room to
allow the load to be magnetically removed.
Find some washers or nuts and Hot Glue the steel parts
to make a shape for the mounds of coal.
Glue the edges using low heat Hot Glue and press down
with your fingers until the glue cools. You can also run
a bead of Super Glue along the edge to seal the bond.
Trim the excess vinyl with scissors following the styrene
edge. Now test fit the load to the car and try a magnet
to “unload” the coal from the car. Look at the Video too.
Concrete Cribbing
Retaining Wall#8506 Small HO & N
#8508 Medium HO
#8510 Large HO & O
Easy to Cut
Curve & Form
Cut with scissors CribbingConcrete
RetainingWalls
CONCRETE SERIES
Flexible!
Pre-Weathered & Stick
BackingPeel
Easy to install
Makes modeling EASY!
Cut with scissors!
Available in 3 sizes!
Highly Detailed!
Molded in Flexible Vinyl
Standard Size 3.75” x 12”
#8506 ONE INCH
ACTUAL SIZE#8508 ONE INCH
ACTUAL SIZE
#8510 ONE INCH
ACTUAL SIZE
See the Video:
#8510 ONE INCH
ACTUAL SIZE
Concrete Cribbing
Retaining Wall#8506 Small HO & N
#8508 Medium HO
#8510 Large HO & O
Easy to Cut
Curve & Form
Cut with scissors CribbingConcrete
RetainingWalls
CONCRETE SERIES
Flexible!
Pre-Weathered & Stick
BackingPeel
Easy to install
Makes modeling EASY!
Cut with scissors!
Available in 3 sizes!
Highly Detailed!
Molded in Flexible Vinyl
Standard Size 3.75” x 12”
See the Video:
#8506 ONE INCH
ACTUAL SIZE
#8508 ONE INCH
ACTUAL SIZE
#8510 ONE INCH
ACTUAL SIZE
Easy to Cut,
Curve & Form
Available
at all
Hobby Stores
MSRP $12.99 each
Flexible
Peel and Stick Self-Adhesive Backing
NEW!
Timber Cribbing Walls
Comes in Three sizes:
#8500 Small, #8502 Medium and #8504 Large
Size 3.75” x 12”
Fully Detailed and Painted in all scales!
Visit our website!
Easy to Cut,Curve & Form
Available at all Hobby Stores
All Scales!Available in Random & Cut Stone!
FlexibleStone Walls
6 types in 3 x 12” lengths!
NEW!
#8510 ONE INCH
ACTUAL SIZE
Concrete Cribbing
Retaining Wall#8506 Small HO & N
#8508 Medium HO
#8510 Large HO & O
Easy to Cut
Curve & Form
Cut with scissors CribbingConcrete
RetainingWalls
CONCRETE SERIES
Flexible!
Pre-Weathered & Stick
BackingPeel
Easy to install
Makes modeling EASY!
Cut with scissors!
Available in 3 sizes!
Highly Detailed!
Molded in Flexible Vinyl
Standard Size 3.75” x 12”
See the Video:
#8506 ONE INCH
ACTUAL SIZE
#8508 ONE INCH
ACTUAL SIZE
#8510 ONE INCH
ACTUAL SIZE
Easy to Cut,
Curve & Form
Available
at all
Hobby Stores
Flexible
Peel and Stick Self-Adhesive Backing
Retaining WallsSize 3.75” x 12”
#8500 ONE INCH
ACTUAL SIZE #8502 ONE INCH
ACTUAL SIZE
#8504 ONE INCH
ACTUAL SIZE
Timber Cribbing
Retaining Wall#8500 Small HO & N
#8502 Medium HO
#8504 Large HO & O
Form
& Stick
BackingPeel
Available in 3 sizes!
Highly Detailed!
Molded in Flexible Vinyl
Standard Size 3.75” x 12” Cut with scissors
Easy to Cut
Timber Cribbing
See the Video:
Flexible!Curve &
Easy to Cut,
Curve & Form
Available
at all
Hobby Stores
Flexible
Retaining WallsSize 3.75” x 12” & Stick
BackingPeel
Timber Cribbing
See the Video:
Flexible!
Timber Cribbing
Retaining Wall#8500 Small HO & N
#8502 Medium HO
#8504 Large HO & O
#8500 ONE INCH
ACTUAL SIZE #8502 ONE INCH
ACTUAL SIZE
#8504 ONE INCH
ACTUAL SIZE
Easy to Cut,
Curve & Form
Available
at all
Hobby Stores
Fully Detailed and Painted in all scales!
Stone WallsFlexible
Visit our website!
Available at all Hobby Stores
Peel and Stick Self-Adhesive Backing
#8250 ONE INCH
ACTUAL SIZE#8252 ONE INCH
ACTUAL SIZE
#8254 ONE INCH
ACTUAL SIZE
#8260 ONE INCH
ACTUAL SIZE#8262 ONE INCH
ACTUAL SIZE
#8264 ONE INCH
ACTUAL SIZE’
Approx. Size 3.25” x 13”
#8250 SMALL RANDOM STONE FLEXIBLE HO & N
#8552 MEDIUM RANDOM STONE FLEXIBLE HO
#8254 LARGE RANDOM STONE FLEXIBLE HO & O
#8260 SMALL CUT STONE FLEXIBLE HO & N
#8262 MEDIUM CUT STONE FLEXIBLE HO
#8264 LARGE CUT STONE FLEXIBLE HO & O