chhattisgarh swami vivekanand technical …csvtu.ac.in/ew/updates/notices/2017-18/may/ph.d programme...

Chhattisgarh Swami Vivekanand Technical University, Bhilai (C.G.)

Ph.D. ProgrammeRules and Regulations

Chhattisgarh Swami Vivekanand Technical University,Bhilai (C.G.)

Chhattisgarh Swami Vivekanand Technical University, Bhilai

Newai, P.O.-Newai, District-Durg, (Chhattisgarh) PIN-491107Phone : (0788) 2200062, Fax : (0788) 2445020

Website : www.csvtu.ac.in, E-mail : [email protected]

INDEXSl. No. Particulars Page No.

1 Ph.D. Programme 2017 Advertisement 4

2 Ph.D. Programme 2017 Notification 5 - 6

3 Admission Application Form 7 - 15

4 DRC meeting proforma 16

5 Proforma for experience certificate 17 - 18

6 Examination Structure 19

7 Ph.D. Ordinance No. 10 of CSVTU, Bhilai 20 - 35

8 List of Approved Research Centre 36 - 38

9 Vacant Seat under Supervisor at Approved Research Centre 39 – 57

10 Vacant Seat under Supervisor at Other than Approved Research Centre 58 - 67

11 Syllabus for Written Test 68 - 151

12 Fee Structure for Ph.D Programme 152 - 154

13 Pre Ph.D Course work Examination Scheme 155

14 Pre Ph.D Course work Syllabus 156- 159

http://www.csvtu.ac.in/

mailto:[email protected]

Affix Recent Colour

photograph

CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY, BHILAI

Application form for appearing in the Entrance Examination/Personal Interview for

Ph.D. Programme, 2017

(For filling this application form please refer to the instructions)

Discipline: ……………………………............................ Specialization: ………………………………………………...

(As per Ph.D. Syllabus )

Entrance Test Test Exempted Roll No. : 5 5 5 5 5 5 5 5 5 5

1. Name (In Block Capital Letters Only) .............................................................................................

(As per academic record) .............................................................................................

2. Date of Birth (enclosed HS/HSS certificate

photocopy)

D D M M Y Y Y Y

3. Nationality .................................................................

If foreign Nationality, write name of the Country ..................................................................

4. Sex M F Other

5. Father’s / Husband’s Name ....................................................................................................................

Mobile No. ..................................................................................................................

6. Mother’s Name .....................................................................................................................

7. Address for Correspondence …………………………………………………………………………..

…………………………………………………………………………...

…………………………………………………………………………...

Email-ID …………………………………………………………………………...

Mobile No. …………………………………………………………………………...

8. Permanent Address …………………………………………………………………………...

…………………………………………………………………………...

…………………………………………………………………………...

9. Category UR OBC SC ST Others

Yes No

Ortho Visual Hearing

10. In case of physically challenged, write Yes or No

In case of physically challenged indicate type of disability

S.

N.

Name of

the Exam

Institute/College

(Name & Address)

University/Board Discipline/Subject Specialization,

if any

Year of

Passing

% Marks

&

Division

1

2

3

4

11. Academic Record (from class 12th on wards)

UGC/CSIR (JRF)/NET/GATE/SLET, other Fellowship Examination Details

Name of

Examination

Examination Discipline Year Result

1

2

3

12. Working/Research Experience/Teaching Experience

S.

N.

Duration Employer Post Nature of

Appointment

CSVTU, Bhilai Updated seniority

list sr. no. with yearFrom To

13. Research papers published (Please provide detail in a separate sheet)

No. of Research Papers published in Journal No. of Research Papers presented in Conference

14. Are you pursuing any course currently, if yes gives details

………………………………………………………………………………………………………………… ..................................................

Yes No

15. Whether any disciplinary action has been taken against you? If so, state reasons, the punishment awarded and

reference of authority awarding the punishment

…………………………………………………………………………………………………………………

………………………………………………………………………………………………………………….

16.Details of Demand Draft / E-payment (Online)

a) Amount Rs. ____________ DD. No. _______________ Date ____________________

b) Issued by (Bank Name & Branch) ____________________________________________

c) E-payment no. and Date

Note: The application fee of Rs. 1000/- must be paid through demand draft in favour of Registrar, Chhattisgarh Swami

Vivekanand Technical University, Bhilai from any nationalized bank or online fee collection mode of CSVTU website. Prefer

online submission system of the University.

Declaration by the applicant

I do solemnly affirm that I have not been punished for any act of indiscipline nor I have adopted any unfair means in

any examination nor involved myself in any other offense whatsoever.

I further solemnly affirm that information furnished by me in this application form are true; and that the certificates and

the Photostat copies of the documents I have submitted, are genuine and that I have not concealed any relevant information.

I further affirm that if at any stage hereafter it is found that the information and the undertaking furnished by me were

not true then:-

•My registration be immediately cancelled without any notice.

•That I shall be liable to refund the scholarship/any financial aid received from the University/any other source during my Ph.D.

programme.

•That I shall be debarred from future admission in any academic course and employment at this University and if already

employed I shall be dismissed without any notice.

Strike out the clause not applicable and put a tick mark in the appropriate box-

I have submitted the Transfer and Migration certificates.

I have not submitted the Transfer and Migration certificates, but will submit the same within 3 months, if admitted.

I also solemnly affirm that as per the CSVTU Modified Ordinances I shall not concurrently pursue any other full

time academic course either at this or any other University. If found doing so I shall be liable to the aforesaid actions and

punishment.

Place:...................... Signature

Date:....................... Name:

5 5 5 5 5 5 5 5 5 5


Ph.D. Entrance Examination/Personal Interview Year 2017

ROLL NO.:

ADMISSION SLIP

Examination Centre:

Name of the Candidate: ..........................................................

Discipline: ........................................................................................................

Address:

.............................................................................................................

.............................................................................................................

is permitted to appear in the Entrance Examination/Personal Interview for Ph.D. Programme 2017...........

Specimen signature of the applicant

Date: Signature of Issuing Officer

Seal

Note: Valid ID proof is must during examination

Affix Recent Colour

photograph

5 5 5 5 5 5 5 5 5 5


Ph.D. Entrance Examination/Personal Interview Year 2017

ROLL NO.:

Examination Centre :

Name of the Candidate: ..........................................................

Discipline: ........................................................................................................

Address:

.............................................................................................................

.............................................................................................................

is permitted to appear in the Entrance Examination/Personal Interview for Ph.D. Programme 2017


Affix Recent Colour

photograph

ATTENDANCE SLIP

The following is to be filled by the invigilator during the examination:

Test Name Date of Exam Signature of the

Examinee

Signature & Name of the Invigilator

Written Test

Personal

Interview

Signature of Centre Supdt.

Seal


INSTRUCTIONS FOR FILLING THE APPLICATION FORM

•Either TYPE or PRINT the entries on the form neatly in single page not backside of the page .

•All items require you to submit an self attested copy of a document.

•Documents to be enclosed are given in the checklist.

•The application fee of Rs. 1000/- must be paid through demand draft in favour of Registrar, Chhattisgarh Swami Vivekanand

Technical University, Bhilai payable at Bhilai from any nationalized bank or online fee collection mode of CSVTU website.

Prefer online fee submission system.

•The candidate should write his/her name at the back of Demand Draft.

•All photographs affixed must be the same.

•Syllabus of Ph.D. Programme is available in the University Website.

CHECKLIST (TICK THE ENCLOSED DOCUMENTS) SEND ONLY ATTESTED COPIES (NOT ORIGINALS)

•Proof of Date of Birth (DOB).

•Copy of SC/ST/OBC Certificate, if applicable.

•Copy of UGC/CSIR (JRF)/NET/GATE/SLET/GPAT score card.

•Copies of marks/grade sheets of U.G. and P.G. programme completed.

•List of Technical papers published, duly signed by the applicant.

•No Objection/relieving Certificate from employer (for employed candidates).

•The Demand draft for the application as applicable.

•Two self addressed stamped (Rs. 5/- each) envelopes of 23 cm x10 cm in size.

•Experience certificate of regular/contract appointment where applicable as per the modified Ordinance no. 10

of CSVTU, Bhilai.

LIST OF DISCIPLINE IN WHICH CURRENTLY Ph.D. PROGRAMMES ARE BEING CARRIED OUT:

• Applied Chemistry

• Applied Mathematics

• Applied Physics

• Humanities

• Pharmaceutical Sciences

• Biotechnology

• Management

• Civil Engineering

• Mechanical Engineering

• Electrical Engineering

• Electrical and Electronics Engineering

• Electronics & Telecommunication Engineering

• Electronics and Instrumentation Engineering

• Computer Sciences & Information Technology

• Information Technology

• Computer Application

• Chemical Engineering

THE COMPLETED APPLICATION FORM MUST REACH ON OR BEFORE “....................”

The application should be submitted to the Principal/Director of the designated Centre of Research

Scrutinization by Departmental Research Committee (DRC) Date of DRC meeting ..................

•The applicant is duly recommended/not recommended by DRC.

•The candidate is required / not required to appear in entrance test if exempted, give reason

.......................................................................................................................................................................................................

.......................................................................................................................................................................................................

•Any other remarks........................................................................................................................................................................

Sl. No. Name of the DRC Member Status Signature

1. Chairman

2.VC Nominee CSVTU, Bhilai

3. Member

4. Member

5. Member

Forwarded by Head of the InstitutionSignature

Seal Principal/Chairman DRC

Seal

Certificate and Forwarding Note by the Employers

(Non CSVTU, Bhilai Organization)

1.Name of the Employing Organization: ………………………………………………………………………………………

2. Type of Organization:

Central Government State Government

Government Autonomous Organization

Public Sector Enterprise Private Sector Industry

Private Engg. College

3. Address of Administrative Office: ……………………………………………………………………………………………

Phone: ……………………………………….. Fax: …………………………..

Email: …………………………………………………………………………………

4. Designation of the employee seeking registration for Ph.D. at CSVTU, Bhilai

…………………………………………………………………………………………………………………………………………………….

5. Employment Details:

a) First joined on (date): ………………………………………………………………………………………………….

b) Holding the present: …………………………………………………………………………………………………..

c) Nature of appointment Temporary / Ad-hoc / Regular: ……………………………………………

d) Nature of the Job: ……………………………………………………………………………………………………….

(R & D, Design, Production, Marketing, Administrative, Teaching)

Certified that, Mr. /Ms. ……………………………………………………………………………… S/O, D/O, W/O: ……………………………………………………employed as ………………………………………………………………………….

In this organization is sponsored for admission to Full Time Ph.D. programme of CSVTU, Bhilai. He / She has been employed inthis organization for the past ………………….. Years in a regular cadre. If selected as a sponsored candidate the organization hasno objection to his/her undergoing four years of Full Time studies at CSVTU, Bhilai and its approved Ph.D. Research Centres.

Signature of Applicant Signatureof Institution Head

Name & Designation

Seal

To Whomsoever It May Concern

(Service Certificate cum NOC for CSVTU, Bhilai Faculty)

This is to certified that Shri / Ms. ……………………………………………………………………… is working as a regular facultyselected under statute 19 of the CSVTU, Bhilai and he / she is holding the post of(Asst.Prof./Asso.Prof.)………………………………………………………………….. In the Dept. of ……………………………………………………….. since…………………………….. . His / Her name in the updated seniority list of CSVTU, Bhilai is in Sl. No. ………………….. in………………………………………………………….. Branch / Subject.

We do not have any objection if Shri / Ms ………………………………………………………………… pursue his / herPh.D. programme from Chhattisgarh Swami Vivekanand Technical University, Bhilai.

Principal


Structure of Ph.D. Entrance Examination 2017

1. Written Test

There would be one written paper in two sections of 100 marks for 3 hrs.Section – I 40 objective type questions from respective discipline. (40 Marks) Section – II 60 objective type questions from specialized area of respective discipline. (60 Marks)Note - (For Humanities will be one section of 100 marks)

2. Personal Interview (for both type of candidates)

3. Exemption from written test

As per modified Ordinance no. 10 clause 3.4 of CSVTU, Bhilai may be exempted/relaxed from written test for following category.•Candidate with valid score card of UGC/CSIR (JRF), NET, SLET or GATE.•Candidates possessing M. Phil degree through a regular Programme from an University, or a deemed University or any other University in corporate by any law for the time being in force and recognized by the University.•Teacher fellowship holder and University/College teachers holding a regular position (regular appointment) and has completed two years of service as teacher in a department of the University/affiliated college/Institution ( Not for Applied Sciences and Humanities ) .•Scientist of any recognized National/International Institutions having two years of research experience.•Teachers holding contract appointments who have served as teacher for a total minimum period of four years in a department of the University/Affiliated college/Institution.

CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITYBHILAI

Ordinance No. 10 (Under Section 38)

Modified Ordinance for Doctor of Philosophy(The underlined portion in the following paragraphs is the modification/addition)

Preamble

1. The degree of Doctor of Philosophy (Ph.D.) may be granted in any discipline belonging to any Faculty of Chhattisgarh SwamiVivekanand Technical University (hereinafter: University), in which Post-Graduate studies and/or research is available at theUniversity or at its affiliated Colleges/Institutions that are recognized as Research Centers by the University.

2. All academic matters related to Ph.D. degree shall be processed by a Departmental Research Committee (hereinafter: DRC)consisting of the following:

i. Head of the School/Department (Chair), for UTD or Principal/Director (Chair) for affiliated Colleges/Institutions of theUniversity.

ii. Head of the concerned department for affiliated college/institution provided the Head of the department holds aDoctorate degree in the relevant discipline.

iii. Two members from the UTD/Research Center who are recognized as Ph.D. Supervisors.

iv. One member nominated by the Kulpati.Provided that three members including the Chairman will form the quorum.

3.Eligibility for registration for degree of Doctor of Philosophy

A candidate for the PhD must at the time of application

3.1 Holds Master’s degree with at least 55% marks or an equivalent grade of the University,a deemed University orany other University incorporated by any law for the time being in force and recognized by the University.

OR

He/She possesses M. Phil. degree through a regular programme from an University, a deemed university or anyother university incorporated by any law for the time being in force and recognized by the university, who has atleast three years of experience of research/teaching with at least three papers published in standard researchjournals (with ISSN) may be permitted to get registered for Ph.D. degree, even if he/she does not possess 55%marks at Master's Level.

OR

He/She holds Bachelor of Engineering/Technology/Architecture/Pharmacy Degree of a recognized University withat least 65% marks or equivalent in aggregate and possessing demonstrable research capabilities shall be eligibleto seek enrollment for the Degree of PhD under special circumstances.

3.2 The requirement of marks at the Master’s level may be relaxed to a maximum of 5% for SC/ST/Differently abledcandidates.

3.3 The selection for admission to Ph.D. degree programme will be done through an Entrance Test to be conducted atthe University level followed by personal interview of the candidate. The Entrance Test will be conducted at theUniversity level once in an year (however looking into the number of applications the frequency of holding theEntrance Test may be increased to Twice in an year)

3.4 The requirements of entrance test is relaxed for

i. Candidates with valid score card of UGC/CSIR (JRF) examination, NET, SLET or GATE.

ii. Candidates possessing M.Phil. degree through a regular programme from an University, a deemed university orany other university incorporated by any law for the time being in force and recognized by the university.

iii. Teacher fellowship holder and University/College teachers holding a regular position (regular appointment) andhas completed two years of service as teacher in a department of the University/affiliated college/Institution.

iv. Scientist of any recognized National/International Institutions having two years of research experience.

3.5 The validity of the Entrance Test will be for two years.

3.6 The cut-off marks for the entrance test will be 50%.

3.7 The modalities of the Entrance Test will be decided by the University.

3.8 The DRC shall scrutinize the candidate’s eligibility for appearing at the entrance test.

4.0 Procedure for Admission/Registration

4.1 An eligible candidate (refer clause 3) must apply for registration for Ph.D. degree of his/her subject on theprescribed form obtainable on payment of prescribed fee. The application shall be considered by the DRC of theconcerned UTD/School of the University/Affiliated College/Institution.

4.2 The DRC will allocate the Supervisor/Co-supervisor, with mutual consent of the candidate and Supervisor/Co-supervisor, for an eligible candidate depending on the number of students per Supervisor/Co-Supervisor, theavailable specialization among the faculty supervisors and the research interest of the student as indicated duringpersonal interview of the student.

4.3. Supervisors must be a faculty member of the School/Teaching department of the University or a regular teacher(regular appointment) or a superannuated teacher of the University/Affiliated college/Institution previouslyholding a regular position.

4.4. Co-supervisor can be outside the jurisdiction of the University as well.

4.5. All eligible candidates except in 3.4 (ii) shall be required to undertake course work for a minimum period of onesemester. The course work must include Research Methodology which may consist of quantitative methods andcomputer applications. The course content shall be designed by the Board of Studies (BoS) of the concernedsubject. The course work may also involve reviewing of published research works in the relevant field.

4.6. The scheme of teaching and examination for the course work will be decided by the University. The contents ofthe course work/s specific to the area of research of the candidate are to be proposed by the Supervisor inconsultation with the Co-Supervisor/s if any.

4.7.On the recommendation of the supervisor, the course work may be carried out by the candidates at the approvedResearch Center/University/any other recognized oragnisation outside the jurisdiction of the University. Thecandidate shall be evaluated at the end of the semester. If the candidate is not able to pass the course withminimum 50% marks in aggregate along with at least 40% marks in theory paper of the concerned subject and atleast 60% marks in the internal assessment, the candidate shall be allowed to reappear at the examinations withinnext 12 months. The respective DRC will conduct the evaluation at the Institutional /Departmental level.

4.8. While granting provisional admission to the candidates to Ph.D. programme the DRC will pay due attention to theNational/State reservation policy.

4.9. The candidate shall have to pay fees as decided by the University from time to time.

4.10. Provided that the teachers of the University/Affiliated colleges and teachers under the UGC/AICTE teacherfellowship scheme or any other scheme will not be required to pay the fees, except the registration fee and six-monthly progress report fee.

Note: No TA/DA shall be payable to the candidates appearing at the Personal Interview. In case of postponement of thePersonal Interview due to unavoidable reasons, no compensation will be provided to the candidates.

5.0 Research Degree Committee (RDC)

The candidate shall be eligible to submit synopsis (as per the prescribed format) of his/her proposed researchwork, after successfully completing the course work, alongwith the title of the thesis (in six copies) duly forwardedby the Chairman of the relevant DRC. He shall be required to make an oral presentation of the proposed workbefore the Research Degree Committee (RDC) consisting of the following members:

i. Kulpati or his nominee.

ii. Dean of the faculty.

iii. Head of the University Teaching Department/School of Studies/Institution in

the subject.

iv. Chairman, Board of Studies in the subject.

v. One external subject expert of the rank of University Professor to be

nominated by the Kulpati, ordinarily out of a panel of 5 experts given by the

Chairman of the Board of Studies concerned. The term of panel shall be co-

terminous with the term of Chairman Board of Studies.

External Expert and two other members will form the quorum.

Note:

i) The Supervisor/Co-Supervisor are entitled to be present during the oral presentation of the candidate.

ii) No TA and DA shall be payable to the candidate and the supervisor/co-supervisor (if any) for attending the RDCmeeting.

6. The meeting of the RDC shall be held in the University office twice a year preferably in July and January. Thecommittee shall confirm a list of approved Supervisor/Co-Supervisor along with their specialization, prepared bythe DRC. This list shall be available with the Registrar/Academic Section of the University. The committee shallformally recommend the registration of the candidate for the Ph.D. Degree. On approval by the RDC thecandidate shall be registered and enrolled as a student from the date of his/her application. He/she will also berequired to pay regular tuition, library and laboratory fees (six-monthly) during his/her research tenure. The RDChas the right

to suggest revision/alterations (if required) in the synopsis forwarded by the DRC.

Provided that if the RDC does not recommend a candidate for registration to Ph.D. Degree, the caution money deposited by the candidate shall be refunded.

7.0 A candidate shall ordinarily be permitted to work for Ph.D. degree in the subject in which he/she has obtainedhis/her Post-graduate degree or the Bachelor degree (as per clause 3).

Provided that research work leading to Ph.D. degree may be encouraged in allied subjects of interdisciplinarynature of the same faculty or of allied faculties. In such cases the candidate may also be permitted to work underone or two co-supervisors, along with the supervisor of the University.

8.0 A candidate shall pursue his/her research at the institution from where his/her application form has beenforwarded under Clause 3 (b) of the Ordinance.

Provided that a candidate permitted to work in a research establishment recognized by the University shall berequired to take at least one co-supervisor along with the supervisor; one of them should be the teacher of theUniversity and the other a Teacher/Scientist/Research Officer/Director of the Institution where the candidate isactually working.

* Includes Institutions and Laboratories run and sponsored by the Union/State Governments or its agencies andForeign University/Institution of repute.

Provided also a candidate may be permitted to carry out his/her research/practical work in a ResearchInstitution/Research Laboratory/Laboratory of a University recognized by the University for the purpose under thesupervision of a Scientist/Director/Teacher of the Institution who or may not be the co-supervisor of thecandidate.

9.0 Supervisor/Co-supervisors

The person recommended as Supervisor/Co-supervisor to guide the Research Scholar

must be:

A Professor in a University Teaching Department/School of Studies.

OR

A Reader/Associate Professor of the University/ a Professor, Associate Professor/Reader in a College/Institutionaffiliated to the University possessing a Doctorate Degree and has published five research papers in standardResearch Journals.

OR

A Lecturer/Assistant Professor of the University Teaching Department/School of Studies/Colleges affiliated to theUniversity who has obtained a Doctorate Degree in the subject and has published at least five Research papers instandard Research Journals (with ISSN) and has at least five years of teaching experience.

However, in order to encourage research interest among teachers of this category, exemption from five yearsteaching experience shall be granted to those who have been awarded with research projects from the State (forexample CGCOST)/National (for example DST, CSIR, UGC etc.) International (for example, WHO, Ford Foundationetc.) Sponsoring Agencies or those who have already published at least five papers SCI/SSCI/A&HCI journals (aslisted and revised by Thomson Reuters from time to time).

OR

A Scientist /Director/Scholar not below the rank of a University lecturer/Assistant Professor, working in a State orCentral research Institute /Organization/ Establishment/Laboratory/Library recognized by the University as aresearch centre, who has obtained a Doctorate Degree in the subject and published 5 research papers onconcerned subject in Standard journals and has five years of experience in the respective field.

Provided that a recognized supervisor who fails to publish and research paper/publication over duration of fiveyears shall not be eligible to enroll and new candidate under his/her supervision.

Provided that the persons who have been recognized as Supervisors/Co-supervisors shall be eligible to superviseeven after their superannuation. However, in this case the superannuated faculty, with their permission of theChairman, DRC, shall have to co-opt and additional Co-supervisor, who is in service, from the relevant researchcenter approved by the University.

Provided also a recognized Supervisor/Co-supervisor under the repealed ordinance shall continue to berecognized as Supervisor/Co-supervisor.

The person recommended as Co-Supervisor to guide the Research Scholar must be:

(a) A recognized Supervisor of the University

(b) An Officer working in the University/Organization of State/Central Government who has obtained adoctorate degree in the relevant subject and has published at least five research papers in reputedjournals (with ISSN) and has at least two years of experience in teaching /research.

(c) A Scientist/Director working in a research institute/organization/ establishment/ laboratory recognizedby the University as a research center, who has obtained a doctorate degree and published fiveresearch papers on concerned subject and has two years post-doctoral research experience.

Provided further that a person who is himself registered for Ph.D. degree of the University in the subject shall notbe eligible to act as Supervisor/Co-supervisor in the concerned subject or member of the RDC related to theconcerned subject mentioned in this Ordinance.

9.1 Any teaching department/Center/School of University/Research laboratory of State/Central Government orGovernment undertaking or an affiliated college/institution may apply for getting the recognition as researchcenter for carrying out Ph.D. Degree programme on depositing the required fees for the same. The teachingdepartment/Center/School/affiliated college/institution, organization will be recognized as a Research Centerbased on the recommendations of a committee formed for this purpose.

Once an establishment has been recognized as a Research Center will continue to act as recognized ResearchCenter of the University, however, the University will have the right to make surprise visit and if not found updatedfor the purpose of carrying out research programme, the organization/institution may be de-recognized as aResearch Center.

10.0 Tenure of Ph.D. Work

(a) The candidate shall pursue his/her research at the approved research center under the Supervisor/Co-supervisors on the approved subject and topic. The candidate shall be permitted to submit his/her thesis notearlier than 24 months and not later than four calendar years from the date of registration. In case a candidatedoes not submit his/her thesis within four calendar years, from the date of registration and does not apply forextension on time, his/her registration shall stand automatically cancelled. Provided that the period forsubmission of thesis can be extended by one year by the Kulapati, if he/she applies for extension within onemonth after the expiry of registration period together with the prescribed fee. In case the candidate does notsubmit his/her thesis within the extended period, his/her registration shall stand automatically cancelled.

Provided also that Kulpati may permit a candidate to get re-registered on the same topic on payment of theprescribed re-registration fee. The minimum period of 24 months and attendance shall not apply to such re-registered candidate.

(b) The candidate possessing M. Phil degree or a teacher (as per clause with 3.4) 2 years teaching experience at thetime of registration can submit his/her thesis after 18 monthsinstead of 24 months as provided in clause 10 (a) ofthe Ordinance.

(c) The candidate shall put in at least 200 days attendance, including actual attendance he/she will earn during thecourse work, in the Institution or with the Supervisor.

11.0 Change of Supervisor

The candidate may be allowed to change the Supervisor by the Kulapati, on the recommendation of thecommittee constituted by the Kulapati for this purpose under special circumstances. No major change in the topicof research will be permitted due to changes in supervisor.

12.0 Six-monthly progress Report

The candidate shall submit every six months a record of attendance, receipt of fees paid and progress report ofthe work through his/her supervisor in the prescribed format. If the progress of work is not found to besatisfactory in two successive reports or no reports are received for a period of one year or the candidate fails todeposit the prescribed fees, the Kulapati may order the removal of the name of the scholar from the list of thoseregistered for the Ph.D. degree.

13.0 Submission of Summary of Thesis

(a) Prior to submission of the thesis, the candidate shall make a pre-Ph.D. presentation before the DRC that maybe open to all faculty members and research students, for getting feedback and comments, which may be suitablyincorporated into the draft thesis under the advice of the supervisor.

(b) The candidate shall submit six copies of the summary of the thesis together with a list of at least two researchpapers published or accepted for publication in a standard journal through his/her Supervisor to the Registrarabout two months prior to the anticipated date of submission of the thesis.

(c) The supervisor shall submit a panel of at least six names of examiners actively engaged in the concerned area ofresearch not below the rank of University Reader/Associate Professor or College Professor in a sealed cover to theRegistrar. Provided that the panel of examiners shall be obtained from the Chairman, Board of Studies of theSubject concerned, in case the candidate is related to the supervisor.

(d) On the receipt of the panel of examiners from the supervisor and summary from the candidate, the Registrar shallcall a meeting of Examination Committee of the subject constituted as per the statute & ordinance of theUniversity. The Committee considering the panel submitted by the Supervisors/Chairman, Board of Studies willprepare a panel of six names to act as examiners.

(e) The term “relations” shall include: Father, Mother, Wife, Husband, Daughter, Son, Grand Son, Grand Daughter,Brother, Sister, Nephew, Niece, Grand Nephew/Niece, Uncle, Aunt, Son-in law, Sister-in law, Father-in-law, Firstcousin-in-law etc.

(f) The Kulpati shall appoint two examiners from outside the state out of the panels submitted separately by theSupervisor and Examination Committee.

(g) The consent of the examiners shall be obtained by sending them the extended abstract.

14. The candidate shall submit three hard copies of his/her thesis along with the followings:

(a) The candidate shall have to produce evidence of publication of two research papers (or evidence of acceptance

for publication) based on this /her thesis work in standard journal. Such evidence (reprints of publications oracceptance letter for publication) has to be appended at the end of the thesis).

(b) The thesis must be accompanied by a declaration from the candidate that the thesis embodies his/her own

work and he/she has worked under the Supervisor at the approved Research Center for the required period as

per provisions of Clause-10 of the Ordinance.

(c) The certificate from the Supervisor together with Co-supervisor, if any, that the thesis fulfills the requirements of the Ordinance relating to the Ph.D. degree of the University is to be attached.

(d) The candidate shall also remit with the thesis the prescribed examination fee.

(e) Submission of Electronic copy of the Thesis/Dissertation (ETD) is mandatory at the time of submission of the Ph.D. thesis. The University shall submit a soft copy to UGC within a period of fifteen days after the award of the degree, for hosting the same in INFLIBNET, accessible to all Institutions/Universities.

(f) The thesis must follow the guidelines of the University for writing the Ph.D. Thesis.

15. Evaluation Procedures following Submission of the Thesis

On receipt of the thesis along with the certificates and fee it shall be sent to the examiners

already consented as per Clause 13 (g) of the Ordinance.

16. The thesis to be accepted for the award of the Ph.D. degree must comply with the

following conditions.

(a) It must be a piece of research work characterized either by the discovery of the facts or by a fresh approachtowards the interpretation of facts or an innovative application in the area of engineering & technology. In eithercase it should evince the candidate’s capacity for critical examination and sound judgment.

(b) It must be satisfactory in point of language and presentation of the subject matter.

17. The examiners shall categorically recommend in the prescribed proforma for acceptance,revision or rejection of thethesis together with detailed comments on the points spelled out in clause 16 of the Ordinance. The examiner

must also give a list of the questions he/she wishes to ask at the viva-voce examination.

18. (a) The examiners may seek clarification of the subject matter of the thesis from theSupervisor. The provision will be incorporated in the letter to be sent to the examiners while sending the thesis.

(b) The Kulapati can recall the thesis from an examiner who fails to send the report within three months of thedate of dispatch of the thesis and appoint another examiner.

19. (a) In case both the examiners reject the thesis or one of them rejects the thesis and the other recommends arevision the thesis shall be rejected.

(b) If both the examiners recommend for the revision of the thesis the candidate shall be called upon to revise thethesis in the light of the observations of the examiners.

(c) If one examiner approves the thesis and the other rejects it or recommends for revision, the thesis shall besent to the third examiner drawn from the panel of the examiners by Kulapati. The opinion of the third examinershall be final.

(d) In case both the original examiners accept the thesis for the award of the Ph.D. Degree or in the event of itbeing referred to the third examiner, the third examiner accepts the thesis for the award of Ph.D. degree, thecandidate shall be called upon to appear at the viva-voce examination before a board examiners comprising of theSupervisor, Co-Supervisor (if any) and one of the two examiners selected by the Kulapati who has accepted thethesis for the award of the Ph.D. Degree. Provided that the Kulapati shall appoint the Chairman, DRC or Chairman,Board of Studies of the subject concerned to act as viva-voce examiner, in place of the Supervisor in case thecandidate is related (Clause 13 e) to the Supervisor.

(e) The Supervisor, Co-Supervisor, Chairman of DRC, Dean of the Concerned Faculty, Chairman of Board of Studiesof the subject concerned, as the case may be, shall be communicated the name of the external examinerappointed by the Kulapati to conduct the viva-voce examination at the approved Research Center where thecandidate has carried out his/her research work.

Provided in special circumstances, Kulapati may appoint alternate viva-voce examiners if both the examiners arenot in a position to conduct the viva-voce examination.

(f) The date, time and place of viva-voce examination shall be notified by the Head of the UTD/School ofUniversity/Head of the affiliating college/Institution on the concerned Notice Board about a week in advanceunder intimation to Registrar of the University. At the time of viva-voce examination the board of examiners shallbe provided with the reports of the examiners which shall be returned along with the report of viva-voceexamination and record of attendance of the examination to the Registrar.

(g) The candidate shall present the work embodied in the thesis before the board of examiners, members of thefaculty, research scholars and other interested persons. After the presentation of the research work the Boardshall ask questions together with those questions which have been provided along with the reports of theexaminers. Others in the audience can also ask questions and the candidate shall reply only those questionspermitted by the external examiner.

(h) In case the recommendation of the viva-voce examiner differs from that of the thesis examiner or there isdifference of opinion between the viva-voce examiners, the candidate shall re-appear at a second viva-voceexamination within six months. If the candidate fails to satisfy the viva-voce examiners a second time, his/herthesis shall be finally rejected. Such candidates would be required to pay the prescribed additional fee for thesecond viva-voce. The external examiner for second viva-voce shall be appointed by the Kulapati.

20. If the examiners recommend that the candidate be asked to revise/improve his thesis, the Kulpati shall permit thecandidate to resubmit his thesis not earlier than six months and not later than eighteen months the period beingcounted from the date of the issue of order to the candidate. The candidate shall be provided examiner(s) reportswithout disclosing the names of the examiners to enable him/her to improve the thesis. All the copies of thethesis shall be returned to the candidate.

In case the candidate is allowed to resubmit the thesis he/she will have to pay the prescribed fee afresh at the time of resubmission, but it shall not be necessary for him to reproduce any certificate of further attendance at the institution at which he/she carried out the work.

The resubmitted three copies of the thesis must make clear mention that it is a revised version.

The thesis shall be got examined as far as possible, by the examiners who recommended the revision.

In case a candidate is asked to revise under clause 19 and one of the examiners recommends again for revisionand the other accepts the thesis for award then the thesis shall be sent to the third examiner. If the third examinerrejects or recommends for revision the thesis shall stand rejected. In case the examiner accepts for award of Ph. D.degree then the candidate shall be awarded the Ph. D. degree on successful viva- voce examination as perprovision of clause 19 of the Ordinance.

If the revised thesis required to be revised a second time it shall automatically stand rejected.

21. Maximum number of research candidates that can be registered and allowed to pursue research work under asupervisor at any particular time shall be six only. The submission of a thesis shall create a vacancy for theadmission of a new candidate for Ph.D. degree under the concerned supervisor.

Provided that the candidates registered with the Co-supervisor shall not be counted for the number of candidatesunder a supervisor.

Provided that the candidates registered with the co-supervisor shall not exceed five candidates.

22. No research scholar shall join any other course of study or appear at any other examination conducted by anyUniversity leading to a degree (except Certificate/Diploma course of languages, Research Methodology, Statistics,and Computer Science).

23. The candidate, if so desires, is allowed to publish his/her thesis. However, such publication shall state on the titlepage itself that this was a thesis approved for the award of the Ph.D. degree of the University.

24. The University agrees that a Ph.D. student is the owner of the copyright in his/her thesis.

25. After the viva-voce, the recommendation of the examiners shall be reported to the Executive Council for the awardof Ph.D. Degree to the candidate. One copy of the thesis will be kept in the University library and another copy willbe kept in the Departmental Library of the Institution where the research work was carried out; the third copy willbe returned to the Supervisor.

Along with the Degree, the University shall issue a Provisional Certificate certifying to the effect that the Degreehas been awarded in accordance with the provisions of the UGC (Minimum Standards and Procedure for theAwards of M.Phil./Ph.D. Degree) Regulation, 2009

26. After the declaration of the result, the candidate on payment of prescribed fee may be provided with the copies ofthe reports of examiners who recommended for the award of the Ph.D. degree on payment of the prescribed fee.The reports will not disclose the identity of the examiners.

27. The candidates who have been already registered for Ph. D. degree under the repealed/previous Ordinance shallcontinue to be governed by the provision of the repealed/previous Ordinance.

The candidates who have applied for registration but have not been registered till this Ordinance comes into forceshall be governed by the provisions of this Ordinance.

28. On detection of any irregularity, the University shall take suitable steps to withdraw the degree as per theprovisions of the Ordinance & Statute of the University.

29. In all cases Kulpati shall have powers to condone the time limit up to six months for valid reasons to be recordedtherein.

***

Chhattisgarh Swami Vivekanand Technical University, BhilaiList of Approved Research Centre

Sl. No. Name of Research Centre Name of discipline

1 Bhilai Institute of Technology, Durg

Applied Chemistry

Applied Mathematics

Applied Physics

Civil Engineering

Computer Application

Computer Science Engineering

Electrical Engineering

Electronics & Telecommunication

Mechanical Engineering

Management

2Shri Shankaracharya Technical Campus, ( ShriShankaracharyaGroup of Institutions) Junwani, Bhilai

Applied Chemistry

Applied Mathematics

Applied Physics




Electrical & Electronics Engineering

Electronics & Instrumentation


Information Technology


Management

3Shri Shankaracharya Technical Campus Junwani Bhilai (ShriShankaracharya Engineering College)

Applied Physics

4 Rungta College of Engineering & Technology, Bhilai

Applied Chemistry

Applied Mathematics

Applied Physics






Humanities

Management

5 Disha Institute of Management & Technology, Raipur

Applied Chemistry

Applied Physics

Management

6 Raipur Institute of Technology, Raipur

Bio-Technology


Chemical Engineering

Applied Chemistry

7 Chhatrapati Shivaji Institute of Technology, Durg




8 Columbia Institute of Pharmacy, Raipur Pharmacy

9School of Studies – Pharmacy (Chouksey Engineering College Bilaspur)

Pharmacy

10 Shri Rawatpura Sarkar Institute of Pharmacy, Kumhari, Durg Pharmacy (Pharmaceutical Science)

11Rungta College of Pharmaceutical Sciences and Research, Bhilai

Pharmacy

12 Christian College of Engineering & Technology, Bhilai Electronics & Telecommunication

13Sickle Cell Institute of Chhattisgarh, Raipur (Pt.JawaharLalNehru Medical College,Raipur)

Biotechnology


Centre & Subject Wise No. of Vacant Seat at approved Research Centre

Sl . No. Name of Research Center Name of disciplineNo. of Vacant

Seat as on 05/05/17

1 Bhilai Institute of Technology, Durg

Applied Chemistry 17

Applied Mathematics 32

Applied Physics 15

Civil Engineering 17

Computer Application 07

Computer Science Engineering 11

Electrical Engineering 33

Electronics & Telecommunication 21

Mechanical Engineering 26

Management 11

2Shri Shankaracharya Technical Campus,( ShriShankaracharya Group of Institutions) Junwani, Bhilai



Applied Physics 35


Computer Science Engineering 19


00


16

Information Technology 00


Electronics & Instrumentation 00


Management 00

3Shri Shankaracharya Technical Campus Junwani Bhilai (Shri shankaracharya Engineering College)

Applied Physics 08

4 Rungta College of Engineering & Technology, Bhilai

Applied Chemistry 26Applied Mathematics 33Applied Physics 10



15



00


Humanities 11Management 02

5 Disha Institute of Management & Technology, RaipurApplied Chemistry 06Applied Physics 00Management 06

6 Raipur Institute of Technology, Raipur

Bio-Technology 00


Chemical Engineering 10


7 Chhatrapati Shivaji Institute of Technology, Durg



00


8 Columbia Institute of Pharmacy, Raipur Pharmacy 43

9School of Studies – Pharmacy (ChoukseyEngineering College Bilaspur)

Pharmacy 30

10Shri Rawatpura Sarkar Institute of Pharmacy, Kumhari, Durg

Pharmacy (Pharmaceutical Science) 14

11Rungta College of Pharmaceutical Sciences and Research, Bhilai

Pharmacy 16

12Christian College of Engineering & Technology


13Sickle Cell Institute of Chhattisgarh, Raipur (Pt.JawaharLal Nehru Medical College,Raipur)

Biotechnology

Total * 652

* The Numbers indicated are variable

Chhattisgarh Swami Vivekanand Technical University, BhilaiNo. of Vacant Seat at Research Center

Name of research Center: Bhilai Institute of Technology, Durg

S. No. Name of discipline Name of Supervisor Specialization

Total No. of Vacant Seat as on05/05/17

1 Civil EngineeringDR. M. K. GUPTA Structures 2DR. S.K. JAISWAL Water Resources 4DR. S.J. Nair Envirnomental 5

2 Mechanical Engineering

DR. ARUN ARORA Thermal 3DR. S.K. GANGULY Production 3

DR.(MRS.) SHIENA SHEKHAR Production 5

DR. RAGHWENDRA BANCHHOR

Production 5

DR. MANOJ KUMAR PAL Thermal 6

DR.(MRS.) SUBHRATA NAGPAL

Design 4

3 Electrical Engineering

DR.(MRS.) SHASHWATI RAY Optimization & Control 3

DR.S.P.SHUKLA Power Systems 1

DR.SANJAY KUMAR SAHU 6

DR.SUPRIYA TRIPATHI 6DR.G.C. BISWAL 6DR.(MRS). A. GUPTA 5

DR.NAGENDRA TRIPATHI 6

4 Electronics & Telecommunication

DR. NAVEEN KUMAR DEWANGAN

6

DR.T. SIVA KUMAR 5DR. ARUN KUMAR 4DR. ATUL DWIVEDI 6

DR. MANISHA SHARMA 0

5 Computer Science Engineering

DR. METTA VENKATA PADMAVATI

Algorithms, Formal Languages and Automata theory

4

DR. RAMESH KUMARMoems Moduling & Simmulation

1

DR. ARPANA RAWAL Data Structures 6

6 Electrical & Electronics

7Computer Application

DR. SUNITA SONI 3DR. JYOTHI PILLAI 3

DR. SANJEEV KARMAKAR Computer Application 1

8 Applied Physics

DR.(MRS.) RUBY DAS Electronics Plasma 4

DR. SAMIT TIWARISolid State Solid state Physics

6

DR. RAJESH LALWANIElectronics Experimental Solid State Materials

5

9 Applied Chemistry

DR. MADHURIMA PANDEY Envirnomental Chemistry 5

DR. SANTOSH SAR Surface Chemistry Kinetics 2

DR. YASHU VERMA 6DR. SUMITA NAIR Inorganic Chemistry 4

10 Applied Mathematics

DR. A. NARAYANCelestial Mechanics & Stability Therory

3

DR. SANJAY SHARMAFun Analysis & Fixed Point & Fuzzy Logic

0

DR. N.K. SINGHFun Analysis & Fixed Point

6

DR. M.D. PANDEY Celestial Mechanics 6

DR. K.N. MISHRA 6

DR. ANANDITA CHAKROBORTY 6

DR. A.K. DUBEY Functional Analysis 5

11 Managment

DR. SANJAY GUHA Marketing, HR 2

DR. ASHOK CHANDRA Marketing 2

DR. URVASHI SHRIVASTAVA Finance 0

DR. DALJEET SINGH WADHWA 3

DR. DHARMENDRA KUMAR GANGESHWAR

2

DR. SHEETAL SHARMA Human Resource 2

Name of research Center: Shri Shankaracharya Technical Campus, (Shri Shankaracharya Group of Institutions) Junwani Bhilai


Total No. of Vacant Seat

as on 05/05/17


DR. J.K.TIWARI Mech. Engineering 5

DR. P.B. DESHMUKH Mech. Engineering 1DR. P.V. JOSHI 5DR. GAURAV GUPTA Mech. Engineering 5

DR. UMESH KUMAR VISHWAKARMAMech. Engineering, Production Engg.

3

2Electrical & Electronics Engineering

DR. SHIMPY RALHAN 6

DR. R.N. PATEL Power System Energy System 1

3Electronics & Telecommunication

DR. MONISHA SHARMA 3

DR. NEETA TRIPATHI DSP Speech Processing 0

DR. JASPAL BAGGA 4

4Computer Science Engineering

DR. ROHIT RAJA 6

DR. SHRIKANT TIWARI Biometrics Image Processing 5

DR. PADMA J BONDE Wireless Networking 1DR. MEGHA MISHRA 4

DR. SIDDHARTHA CHOUBEYImage Processing, Networking Crytrography

2

DR. ABHA CHOUBEY Medical Image Processing 1

5 Information Technology

6 Computer Application DR. SMITA SELOT NLP, KR 3

7 Applied Physics

DR. M.L. VERMA Material Science 3

DR. MINI A. PATERIASolid StatePhysics, Nanoscience

2

DR. D.S. RAGHUWANSHISolid State & Opto-electronics

6

DR. K. DESHMUKH Solid State Physics 6

DR. MANMEET KAUR BHUIE 6

DR. RITU SHRIVASTAVA 6

DR. B. KESHAV RAO Material science 6

8 Applied Chemistry

DR. SUPRIYA BISWAS Kinetics 1DR. REKHA TRIVEDI Envirnomental Field 6DR. LAXMIKANTA 6DR. SAMTA DESHPANDEY 6DR. NIDHI TIWARI 6DR. PRACHI P NIMJE Organic Chemistry 6

9 Applied Mathmatics

DR. MANDWI MISHRA 6

DR. RAKSHA RANI AGRAWALFun Analysis & Fixed Point & Fuzzy Logic

4

DR. VANDANA RAIFun Analysis & Fixed Point

6

DR. SHILPI DEWANGAN Celestial Mechanics 5DR. M.M SINGH 2DR. RITA SHUKLA 6DR. RAJLAXMI GUPTA 6

DR. SANDEEP SHRIVASTAVA Functional Analysis 5

10 ManagmentDR. SOUREN SARKAR 1

DR. MONICA SHRIVASTAVA 2

Name of research Center: Shri Shanakaracharya Technical Campus Junwani Bhilai (ShriShanakaracharya Engineering College)

S. No. Name of discipline Name of Supervisor SpecializationTotal No. of

Vacant Seat as on 05/05/17

1 Applied Physics

DR. MIMI A PATERIA 2

DR. RITU SHRIVASTAVA 6

Name of research Center: Rungta College of Engineering & Technology, Bhilai (R1)



as on 05/05/17


DR. MUKESH THAKUR 5

PRAVEEN BORKAR 5

MOON BENARJEE 6

2 Electrical Engineering DR. SATYA PRAKASH DUBEY Power Electronics 2

3 Electronics & Telecommunication


DR. ANURAG SHARMA 5

DR. SOURABH RUNGTA Computer Networking 1

DR. ASHA AMBHAIKAR Data Mining, Mobile-adhoc 3

DR. NITIN MISHRAWeb Security & Machine Learning System

6

5 Computer Application

6 Applied PhysicsDR. ARTI VERMA Applied Physics 5DR. ARCHANA SHARAN Applied Physics 5

7 Applied Chemistry

DR. MANISHA AGRAWAL Physico-Organic Chemistry 2

DR. ABHA SINHA Organic Chemistry 6

DR. SANGEETA PATIL 6

DR. MANISHA THAKUR 6

DR. RICHA SHARMA Organic Chemistry 6


DR. SHUBHASH CHANDRA SHRIVASTAVA

Celestial Mechanics & Stability Therory

4

DR. MANJU SANGHI 5

DR. AWADHESH MOURYA 6

DR. JOETA TOMAR 6

DR. RESHMA K.P. 6

DR. C.RAMESH KUMAR 6

9 Management DR. MANOJ VERGHEESE Marketing & Finance 2

10 Humanities

DR. NEEMA BALAN 6

DR. JAYA MISHRA Poetry (T.S. Eliot Literature) 5

Name of research Center: Chhatrapati Shivaji Institute of Technology, Durg



as on 05/05/17


DR. ANURAG VERMA Design (Mechanisms) 5

DR. K. SRIDHAR Quality Engg. 4

DR. PANKAJ KUMAR GUPTA Thermal & Fluid Mechanics 6

DR. VIVEK MISHRA Production 3



Name of research Center: Raipur Institute of Technology, Raipur



1 Mechanical Engineering DR. N. K. SAIKHEDKARHeat Transfer & solar Energy

2


3 Chemical EngineeringDR. HARENDRA KUMAR Three Phase Fluidization 4

DR. AAKANSHA SWARNKAR 6

4 Applied Chemistry

DR. PRATIMA RANI DWIVEDI 6

DR.(Mrs.) DEEPTI SAHAREOrganic Chemistry & Envirnomental Chemistry

5

5 Biotechnology DR. TANUSHREE CHATTERJEE Microbiology 0

Name of research Center: Disha Institute of Management and Technology, Raipur



1 Management DR. RESHMA SHRIVASTAV Human Resource 6

2 Applied Chemistry DR. SHAKTI NAIR Chemistry Envirnoment 6

3 Applied Physics Supervisor not available

Name of research Center: Christan College of Engineering and Technology, Bhilai




DR. DIPALI SOREN 3

DR. ABHISHEK KUMAR SHRIVASTAV 6

DR. Mrs. MINA MISHRA 3

Name of research Center: Rungta College of Pharmaceutical Science and Research, Bhilai (C.G.)



as on 05/05/17

1 Pharmacy

DR. DULAL KRISHNA TRIPATHI Pharmaceutics 4

DR. AJAZUDDIN Pharmaceutics 3

DR. AMIT ALEXANDER Pharmaceutics 5

DR. KARTIK TULARAM NAKHATE Pharmacology 4

Name of research Center: Shri Rawatpura Sarkar Institute of Pharmacy, Kumhari, Durg (C.G.)



as on 05/05/17

1 Pharmacy

DR. CHANCHAL DEEP KAUR Pharmaceutics 6

DR. HEMANT KUMAR DHONGADE Pharmacognosy 6

DR.(Mrs.) PRANITA KASHYAP Pharmaceutical Chemistry 2

Name of research Center: Columbia Institute of Pharmacy



1 Pharmacy

DR. AMIT ROY Pharmacognosy1

DR. RAVINDRA PANDEY Pharmacognosy6

DR. RAM KUMAR SAHU Pharmacognosy6

DR. SHIV SHANKAR SHUKLA Quality Assurance6

DR. S.PRAKASH RAO6

DR. VIJAY SINGH6

DR. SANDIP PRASAD TIWARI6

DR. TRILOCHAN SATAPATHY Pharmacology6

Name of research Center: School of Pharmacy, Chouksey Engineering College, Bilaspur (C.G.)



1 Pharmacy

DR. D.K. AHIRWAR Pharmacognosy 1

DR. SWEETY LANJHIYANA Pharmacognosy 6

DR. RITESH JAIN Pharmacology 6

DR. UTPAL JANA Pharmaceutics 6

DR. STATISH SAHU Pharma. Chemistry 5

DR. PANKAJ MASIH 6

No. of Subject wise Vacant Seat other than Research Centre

S. No. Name of Research Center Name of discipline

No. of Vacant Seat

As on 05/05/17

1 RSR Rungta College of Engineering & Technology, Bhilai


Applied Physics 06

Civil Engineering 06


Humanities 06

2Shri Shankaracharya Technical Campus, ( Shrishankaracharya Group of Institutions) Junwani, Bhilai

Humanities 06

Pharmacy 14

3Shri Shankaracharya Technical Campus Junwani Bhilai (Shrishankaracharya Engineering College)

Applied Mathmatics 11


Humanities 06


00

4 Shri Rawaypura Sarkar institute of Technology-II, RaipurComputer Science Engineering

05

5 Rungta College of Engineering & Technology, Bhilai Civil Engineering 05

6 Central College of Engineering and Management, Raipur


04

Applied Physics 06


7Chhattisgarh Institute of Technology, Rajnandgaon


02

8 Rungta Engineering College , Raipur

Applied Chemistry 06Applied Mathmatics 6Electronics & Telecommunication

00


03


9Rungta College of Engineering & Technology, Raipur


10 J K College of Pharmacy, Bilaspur Pharmacy 17

11Kruti Institute of Technology and Technology, Raipur

Mechanical Engineering 06Applied Chemistry 06

12Kirodimal Institute of Technology , Raigarh

Applied Physics 02

13Shri Shankaracharya Institute of Engineering, Durg

Mechanical Engineering 04Civil Engineering 06

14Christian College of Engineering and Technology, Bhilai

Applied Chemistry 12Electrical engineering 06Communication Skills 06Applied Physics 12Applied Mathmatics 15

15GD Rungta College of Engineerinf and Technology, Bhilai

Mechanical Engineering 06Applied Physics 06

16 Rungta Engineering College , Bhilai

Applied Physics 05Applied Chemistry 12Mechanical Engineering 07Applied Mathmatics 02

S. No. Name of Research Center Name of disciplineNo. of Vacant Seat

As on 05/05/17

17

Shri Shankaracharya Technical Campus, (Shri ShankaracharyaInstitute of Technology & Management) Junwani Bhilai


Applied Chemistry 6



Total * 286

* The Numbers indicated are variable


No. of Vacant Seat other than Research CentreName of research Center: Rungta College of Engineering & Technology, Raipur

S. No. Name of discipline Name of Supervisor SpecializationTotal No. of Vacant

Seat As on 05/05/17


DR. D.N. DEWANGAN 6

DR. PRAVIN KUMAR BORKAR5

DR. MUKESH THAKUR 4

Name of research Center: RSR Rungta College of Engineering & Technology, Bhilai


Seat As on 05/05/17

1 Mechanical Engineering DR. B.K. PATLE 6

2 Applied Physics DR. MANISH TIWARI 6

3 Applied Chemistry DR. PRABHAKAR PATERIA 6

4 Humanities DR. ASHISH SHARMA 6

5 Civil Engineering DR. P.S. BOKARE 6

Name of research Center: Central College of Engineering and Management, Raipur


Total No. of Vacant Seat As on

05/05/17

1 Applied Physics DR. SANJAY PANDEY Solid State, Luminence 6

2 Computer Science Engineering DR. P. UDAY KUMAR Wireless Network, Sensor & Adhoc Data WH+DM

4

Name of research Center: Chhattisgarh Institute of Technology, Rajnandgaon


Vacant Seat As on 05/05/17

1Electrical & Electronics Engineering

DR. D.D. NEEMA 2

Name of research Center: Kruti Institute of Technology and Technology, Raipur



1 Mechanical Engineering DR. BHURCHAND JAIN 6

2 Applied Chemistry DR. PRATIMA RANI DWIVEDI 6

Name of research Center: Kirodimal Institute of Technology , Raigarh



1 Applied Physics DR. N.K. CHANDAN 2

Name of research Center: Shri Shankaracharya Institute of Engineering, Durg


Total No. of Vacant Seat As on 05/05/17

1 Mechanical Engineering DR. DEEPAK SHARMA 4

2 Civil Engineering DR. JAYANT D SUPE 6

Name of research Center: GD Rungta College of Engineerinf and Technology, Bhilai



1 Mechanical EngineeringDR. PRADIP KUMAR TALAPATRA

Production Engineering 6

2 Applied Physics DR. SHAHID A. SIDDIQUISolid State Physics (Material Science)

6

Name of research Center: Shri Shanakaracharya Technical Campus Junwani Bhilai (ShriShanakaracharya Engineering College)


Seat As on 05/05/17

1 Applied Mathematics*DR. MANDWI MISHRA 6

DR. SHILPI DEWANGAN 5

2 Applied Chemistry* DR. PRACHI NIMJE 6

3Electronics & Telecommunication*

DR. NEETA TRIPATHI 0

Name of research Center: Christan College of Engineering and Technology, Bhilai


Seat As on 05/05/17

1 Electrical Engineering DR. MANOJ KUMAR NIGAM 6

2 Applied PhysicsDR. SANDHYA PILLAI 6

DR. ANIL KUMAR CHOUBEY 6

3 Applied ChemistryDR. RAJESHWAR SINGH 6

DR. PREETI NANDKUMAR 6


DR. DILLIP KUMAR DASH 3

DR. SASANKA SEKHAR BISHOYI 6

DR. SUBHASHISH BISWAS 6

5 Communication Skills DR. BINU JACOB 6

Name of research Center: Rungta College of Engineering & Technology, Bhilai (R1)

S. No. Name of discipline Name of Supervisor SpecializationTotal No. of Vacant Seat

As on 05/05/17

1 Civil Engineering DR. S.M. PRASANNA KUMAR 5

Name of research Center: Rungta Engineering College , Raipur


As on 05/05/17

1 Mechanical Engineering DR. PANKAJ KUMAR 6


DR. ANANT G. KUMAR 0


DR. ANURAG SHARMA 3

4 Applied Chemistry DR. SHILPA SHARMA 6

5 Applied Mathmatics DR. MANOJ KUMAR JHA 6

Name of research Center: Shri Rawatpura Institute of Technology-II Naya Raipur


As on 05/05/17

1 Computer Science Engg. Dr. Akhilesh Tiwari 5

Name of research Center: Rungta Engineering College , Bhilai


As on 05/05/17

1 Mechanical EngineeringDR. AJAY TIWARI 5

DR. M. BANERJEE 2

2 Applied Physics DR. ARTI VERMA 5

3 Applied ChemistryDR. SANGEETA PATIL 6

DR. MANISHA THAKUR 6

4 Applied Mathmatics DR. K.P. RESHMA 2

Name of research Center: J K College of Pharmacy, Bilaspur


As on 05/05/17

1 Pharmacy

DR. DURGA PRASAD PANDA 5

DR. HAMID KHAN 6

DR. SHRUTI RATHORE 6

Name of research Center: Shri Shankaracharya Technical Campus, (Shri Shankaracharya Group of Institutions) Junwani Bhilai


As on 05/05/17

1 PHARMACY

DR. A.K. JHA 4

DR. SHEKHAR VERMA 4

DR. SWARNALI DAS PAUL 6

2 Humanities Dr. Ranjana Das 6

Name of research Center: Shri Shankaracharya Technical Campus, (Shri Shankaracharya Institute of Technology & Management) Junwani Bhilai


1 Mechanical Engineering Dr. UMESH VISHWKARMA 3

2 Applied Chemistry DR. SAMPTA DESHPANDEY 6


DR. MONISHA SHARMA 3


DR. M.M. SINGH 2

DR. SANDEEP KR. SHRIVASTAVA 5

DR. VANDANA RAI 6

CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY

BHILAI

Ph.D. Entrance Examination Scheme, 2017

Maximum Marks – 100 Duration of Examination – 3 hrs

Section – II

Section – I

Consisting of 40 objective type questions from relevant discipline of the syllabus.

Consisting of 60 objective type questions from any of the specialization of the relevant discipline of the syllabus.

The weightage for section I shall be 40% & section II shall be 60%.


BHILAI

Syllabus for Entrance Examination for Admission in Ph.D. programme, 2017

Discipline: Biotechnology

Section – I

Microbiology: Prokaryotic and eukaryotic cell structure; Microbial nutrition, growth and control; Microbial metabolism (aerobicand anaerobic respiration, photosynthesis); Nitrogen fixation; Chemical basis of mutations and mutagens; Microbial genetics(plasmids, transformation, transduction, conjugation); Microbial diversity and characteristic features; Viruses.

Biochemistry: Biomolecules and their conformation; Ramachandran map; Weak inter- molecular interactions inbiomacromolecules; Chemical and functional nature of enzymes; Kinetics of single substrate and bi-substrate enzyme catalyzedreactions; Bioenergetics; Metabolism (Glycolysis, TCA and Oxidative phosphorylation); Membrane transport and pumps; Cellcycle and cell growth control; Cell signaling and signal transduction; Biochemical and biophysical techniques formacromolecular analysis.

Molecular Biology and Genetics: Molecular structure of genes and chromosomes; DNA replication and control; Transcriptionand its control; Translational processes; Regulatory controls in prokaryotes and eukaryotes; Mendelian inheritance; Geneinteraction; Complementation; Linkage, recombination and chromosome mapping; Extra chromosomal inheritance;Chromosomal variation; Population genetics; Transposable elements, Molecular basis of genetic diseases and applications.

Process Biotechnology: Bioprocess technology for the production of cell biomass and primary/secondary metabolites, such asbaker’s yeast, ethanol, citric acid, amino acids, exo-polysacharides, antibiotics and pigments etc.; Microbial production,purification and bioprocess application(s) of industrial enzymes; Production and purification of recombinant proteins on a largescale; Chromatographic and membrane based bioseparation methods; Immobilization of enzymes and cells and their applicationfor bioconversion processes. Aerobic and anaerobic biological processes for stabilization of solid / liquid wastes; Bioremediation.Bioprocess Engineering: Kinetics of microbial growth, substrate utilization and product formation; Simple structured models;Sterilization of air and media; Batch, fed-batch and continuous processes; Aeration and agitation; Mass transfer in bioreactors;Rheology of fermentation fluids; Scale-up concepts; Design of fermentation media; Various types of microbial and enzymereactors; Instrumentation in bioreactors.Plant and Animal Biotechnology: Special features and organization of plant cells; Totipotency; Regeneration of plants; Plantproducts of industrial importance; Biochemistry of major metabolic pathways and products; Autotrophic and heterotrophicgrowth; Plant growth regulators and elicitors; Cell suspension culture development: methodology, kinetics of growth andproduction formation, nutrient optimization; Production of secondary metabolites by plant suspension cultures; Hairy rootcultures and their cultivation. Techniques in raising transgencies.Characteristics of animal cells: Metabolism, regulation and nutritional requirements for mass cultivation of animal cell cultures;Kinetics of cell growth and product formation and effect of shear force; Product and substrate transport; Micro & macro-carrierculture; Hybridoma technology; Live stock improvement; Cloning in animals; Genetic engineering in animal cellculture; Animal cell preservation.Immunology: The origin of immunology; Inherent immunity; Humoral and cell mediated immunity; Primary and secondarylymphoid organ; Antigen; B and T cells and Macrophages; Major histocompatibility complex (MHC); Antigen processing andpresentation; Synthesis of antibody and secretion; Molecular basis of antibody diversity; Polyclonal and monoclonal antibody;Complement; Antigen-antibody reaction; Regulation of immune response; Immune tolerance; Hyper sensitivity; Autoimmunity;Graft versus host reaction.Recombinant DNA Technology: Restriction and modification enzymes; Vectors: plasmid, bacteriophage and other viral vectors,cosmids, Ti plasmid, yeast artificial chromosome; cDNA and genomic DNA library; Gene isolation; Gene cloning; Expression ofcloned gene; Transposons and gene targeting; DNA labeling; DNA sequencing; Polymerase chainreactions; DNA fingerprinting; Southern and northern blotting; In-situ hybridization; RAPD; RFLP; Site-directed mutagenesis; Genetransfer technologies; Gene therapy.Bioinformatics: Major bioinformatics resources (NCBI, EBI, ExPASy); Sequence and structure databases; Sequence analysis(biomolecular sequence file formats, scoring matrices, sequence alignment, phylogeny); Genomics and Proteomics (Large scalegenome sequencing strategies; Comparative genomics; Understanding DNA microarrays and protein arrays); Molecular modelingand simulations (basic concepts including concept of force fields).

***


BHILAI

Syllabus for Entrance Examination for Admission in Ph.D. programmer 2017

Discipline : Civil Engineering

Section - I

STRUCTURAL ENGINEERINGMechanics: Bending moment and shear force in statically determinate beams. Simple stress and strain relationship: Stress andstrain in two dimensions, principal stresses, stress transformation, Mohr’s circle. Simple bending theory, flexural and shearstresses, unsymmetrical bending, shear centre. Thin walled pressure vessels, uniform torsion, buckling of column, combined anddirect bending stresses.Structural Analysis: Analysis of statically determinate trusses, arches, beams, cables and frames, displacements in staticallydeterminate structures and analysis of statically indeterminate structures by force/energy methods, analysis by displacementmethods (slope deflection and moment distribution methods), influence lines for determinate structures.Concrete Structures: Concrete Technology - properties of concrete, basics of mix design, Concrete design – basic working stressand limit state design concepts, analysis of ultimate load capacity and design of members subjected to flexure, shear,compression and torsion by limit state methods.Steel Structures: Analysis and design of tension and compression members, beam and beam – columns, column bases.Connections simple and eccentric, beam-column connections, Plastic analysis of beams and frames.

GEOTECHNICAL ENGINEERINGSoil Mechanics: Origin of soils, soil classification, three-phase system, fundamental definitions, relationship andinterrelationships. Permeability & seepage, effective stress principle, consolidation, compaction, shear strength.

Foundation Engineering: Sub – surface investigations – scope, drilling bore holes, sampling, penetration tests, plate load test, Earthpressure theories, effect of water table, layered soils, Stability of slopes-infinite slopes, finite slopes. Foundation types – foundationdesign requirements. Shallow foundations – bearing capacity, effect of shape, water table and other factors, stress distribution,settlement analysis in sands & clays. Deep foundations – pile types, dynamic & static formulae, load capacity of piles in sands &clays, negative skin friction.WATER RESOURCES ENGINEERINGFluid Mechanics and Hydraulics: Properties of fluids, principle of conservation of mass, momentum energy and correspondingequations, potential flow, applications of momentum and Bernoulli’s equation, laminar and turbulent flow, flow in pipes. Concept ofboundary layer and its growth. Uniform flow, critical flow and gradually varied flow in channels, specific energy concept, hydraulicjump. Forces on immersed bodies, flow measurements in channels, tanks and pipes. Dimensional analysis and hydraulic modeling.Kinematics of flow, velocity triangles and specific speed of pumps and turbines.Hydrology: Hydrologic cycle, rainfall, evaporation, infiltration, stage discharge relationships, unit hydrographs, flood estimation,reservoir capacity, reservoir and channel routing. Well hydraulics.Irrigation: Duty, delta, estimation of evapo-transpiration. Crop water requirements. Design of lined and unlined canals, waterways,head works, gravity dams and spillways, Design of weirs on permeable foundation. Types of irrigation system, irrigation methods,Water logging and drainage, sodic soils.ENVIRONMENTAL ENGINEERINGWater requirements: Quality standards, basic unit processes and operations for water treatment, Drinking water standards, waterrequirements, basic unit operations and unit processes for surface water treatment, distribution of water. Sewage and seweragetreatment, quantity and characteristics of wastewater. Primary, secondary and tertiary treatment of wastewater, sludge disposal,effluent discharge standards, Domestic wastewater treatment, quantity of characteristics of domestic wastewater, primary andsecondary treatment Unit operations and unit processes of domestic wastewater, sludge disposal.Air Pollution: Types of pollutants, their sources and impacts, air pollution metrology, air pollution control, air quality standards andlimits.Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid wastes, engineered systems, for solidwaste management (reuse/recycle, energy recovery, treatment and disposal).TRANSPORTATION ENGINEERINGHighway Planning: Geometric design of highways, testing and specifications of paving materials, design of flexible and rigidpavements.Traffic Engineering: Traffic characteristics, theory of traffic flow, intersection design, traffic signs and signal design, highway capac

***


BHILAI

Syllabus for Entrance Examination for Admission in Ph.D. programme, 2017Discipline : Computer Sciences (for CSE, IT, MCA)

Section - IComputer Architecture: Architectural classification schemes, Memory models, Pipelining, RISC CISC, VLIW architectures, datadependency, and interconnection network.Software Systems: Data structures and Algorithms: the notion of abstract data types, stack, queue, list, set, string, tree, binary searchtree, heap, graph, tree and graph traversals, connected components, spanning trees, shortest paths, hashing, sorting, searching,design techniques (greedy, dynamic, divide and conquer, Algorithm design by induction), asymptotic analysis (best, worst, averagecases) of time and space, upper and lower bounds, Basic concepts of complexity classes – P, NP, NP-hard, NP-complete.Programming Methodology: Scope, binding, parameter passing, recursion, procedure oriented programming – data types anddeclarations, assignment and control flow statements, 1-d and 2-d arrays, functions, pointers; Concepts of object-orientedprogramming - classes, objects, inheritance, polymorphism, operator overloading.Operating Systems: Classical concepts (concurrency, synchronization, deadlock), Distributed Operating System, multithreading, inter-process communication, CPU scheduling, memory management, file systems, I/O systems, protection and security, shellprogramming.Information Systems and Software Engineering: SDLC, planning and managing theProject, design, coding, testing, implementation, maintenance.Databases: E-R diagrams, object and relational model, database design, integrity constraints, normal forms, query languages (SQL),file structures (sequential, indexed), b- trees, transaction and concurrency control.Data Communication and Computer Networks: ISO/OSI and TCP/IP stacks, transmission media, data encoding, multiplexing, flowand error control, LAN technologies (Ethernet, token ring), network devices – switches, gateways, routers, network security –cryptography, digital signature, firewalls, routing concepts, ATM, Queuing theory – M/M/1 queues, poisson and other distributions.

***


BHILAISyllabus for Entrance Examination for Admission in Ph.D. programme, 2017

Discipline: Electrical Engineering

(Common for Electrical Engg. and Electrical & Electronics Engineering)

Section - IElectric Circuits and Fields: Network graph, KCL, KVL, node and mesh analysis, transient response of dc and ac networks; sinusoidalsteady-state analysis, resonance, basic filter concepts; ideal current and voltage sources, Thevenin’s, Norton’s and Superposition andMaximum Power Transfer theorems, two-port networks, three phase circuits; Gauss Theorem, electric field and potential due topoint, line, plane and spherical charge distributions; Ampere’s and Biot-Savart’s laws; inductance; dielectrics; capacitance.Signals and Systems: Representation of continuous and discrete-time signals; shifting and scaling operations; linear, time-invariantand causal systems; Fourier series representation of continuous periodic signals; sampling theorem; Fourier, Laplace and Ztransforms.Electrical Machines: Single phase transformer - equivalent circuit, phasor diagram, tests, regulation and efficiency; three phasetransformers - connections, parallel operation; autotransformer; energy conversion principles; DC machines - types, windings,generator characteristics, armature reaction and commutation, starting and speed control of motors; three phase induction motors -principles, types, performance characteristics, starting and speed control; single phase induction motors; synchronous machines -performance, regulation and parallel operation of generators, motor starting, characteristics and applications; servo and steppermotors, special machines.Power Systems: Basic power generation concepts; transmission line models and performance; cable performance, insulation; coronaand radio interference; distribution systems; per-unit quantities; bus impedance and admittance matrices; load flow; voltage control;power factor correction; economic operation; symmetrical components; fault analysis; principles of overcurrent, differential anddistance protection; solid state relays and digital protection; circuit breakers; system stability concepts, swing curves and equal areacriterion; HVDC transmission and FACTS.Control Systems: Principles of feedback; transfer function; block diagrams; steady-state errors; Routh and Niquist techniques; Bodeplots; root loci; lag, lead and lead-lag compensation; state space model; state transition matrix, controllability and observability.

Electrical and Electronic Measurements: Bridges and potentiometers; PMMC, moving iron, dynamometer andinduction type instruments; measurement of voltage, current, power, energy and power factor; instrumenttransformers; digital voltmeters and multimeters; phase, time and frequency measurement; Q-meters; oscilloscopes;potentiometric recorders; error analysis.Analog and Digital Electronics: Characteristics of diodes, BJT, FET; amplifiers - biasing, equivalent circuit and frequencyresponse; oscillators and feedback amplifiers; operational amplifiers - characteristics and applications; simple activefilters; VCOs and timers; combinational and sequential logic circuits; multiplexer; Schmitt trigger; multi- vibrators;sample and hold circuits; A/D and D/A converters; 16 & 8-bit microprocessor basics, architecture, programming andinterfacing.

Power Electronics and Drives: Semiconductor power diodes, transistors, thyristors, triacs, GTOs, MOSFETs and IGBTs -static characteristics and principles of operation; triggering circuits; phase control rectifiers; bridge converters - fullycontrolled and half controlled; principles of choppers and inverters; basis concepts of adjustable speed dc and ac drives.

Advanced Topics in Electrical Engineering: Artificial Neural Network, Fuzzy systems, Neuro-fuzzy systems and geneticalgorithms, Simulation tools used in Electrical Engineering.

***


BHILAI


Discipline: Electronics and Instrumentation Engineering

Section - I

Basics of Circuits and Measurement Systems: Kirchoff’s laws, mesh and nodal Analysis. Circuit theorems. One-port and two-portNetwork Functions. Static and dynamic characteristics of Measurement Systems. Error and uncertainty analysis. Statistical analysis ofdata and curve fitting.Transducers, Mechanical Measurement and Industrial Instrumentation: Resistive, Capacitive, Inductive and piezoelectrictransducers and their signal conditioning. Measurement of displacement, velocity and acceleration (translational and rotational),force, torque, vibration and shock. Measurement of pressure, flow, temperature and liquid level. Measurement of pH, conductivity,viscosity and humidity.Analog Electronics: Characteristics of diode, BJT, JFET and MOSFET. Diode circuits. Transistors at low and high frequencies, Amplifiers,single and multi-stage. Feedback amplifiers. Operational amplifiers, characteristics and circuit configurations. Instrumentationamplifier. Precision rectifier. V-to-I and I-to-V converter. Op-Amp based active filters. Oscillators and signal generators.Digital Electronics: Combinational logic circuits, minimization of Boolean functions. IC families, TTL, MOS and CMOS. Arithmeticcircuits. Comparators, Schmitt trigger, timers and mono-stable multi-vibrator. Sequential circuits, flip-flops, counters, shift registers.Multiplexer, S/H circuit. Analog-to-Digital and Digital-to-Analog converters. Basics of number system. Microprocessor applications,memory and input-output interfacing. Microcontrollers.Signals, Systems and Communications: Periodic and aperiodic signals. Impulse response, transfer function and frequency responseof first- and second order systems. Convolution, correlation and characteristics of linear time invariant systems. Discrete time system,impulse and frequency response. Pulse transfer function. IIR and FIR filters. Amplitude and frequency modulation and demodulation.Sampling theorem, pulse code modulation. Frequency and time division multiplexing. Amplitude shift keying, frequency shift keyingand pulse shift keying for digital modulation.

Electrical and Electronic Measurements: Bridges and potentiometers, measurement of R, L and C. Measurements of voltage,current, power, power factor and energy. A.C & D.C current probes. Extension of instrument ranges. Q-meter and waveformanalyzer. Digital voltmeter and multi-meter. Time, phase and frequency measurements. Cathode ray oscilloscope. Serial andparallel communication. Shielding and grounding.Control Systems and Process Control: Feedback principles. Signal flow graphs. Transient Response, steady-state-errors. Routhand Nyquist criteria. Bode plot, root loci. Time delay systems. Phase and gain margin. State space representation of systems.Mechanical, hydraulic and pneumatic system components. Synchro pair, servo and step motors. On-off, cascade, P, P-I, P-I-D,feed forward and derivative controller, Fuzzy controllers.Analytical, Optical and Biomedical Instrumentation: Mass spectrometry. UV, visible and IR spectrometry. X-ray and nuclearradiation measurements. Optical sources and detectors, LED, laser, Photo-diode, photo-resistor and their characteristics.Interferometers, applications in metrology. Basics of fiber optics. Biomedical instruments, EEG, ECG and EMG. Clinicalmeasurements. Ultrasonic transducers and Ultrasonography. Principles of Computer Assisted Tomography.

***


BHILAI


Discipline: Electronics & Telecommunication Engineering

Section - I

Electronic Devices and Circuits: Energy bands in silicon, intrinsic and extrinsic silicon. Carrier transport in silicon: diffusioncurrent, drift current, mobility, and resistivity. Generation and recombination of carriers. p-n junction diode, BJT, JFET, MOScapacitor, MOSFET, Special diodes, Device technology: integrated circuits fabrication process, Oxidation, diffusion, ionimplantation, photolithography, n-tub, p-tub and twintub CMOS Process, Diodes and Transistor Circuits.Advanced Analog Circuits: Differential and operational amplifier and its applications. Frequency response of amplifiers.Sinusoidal oscillators; criterion for oscillation; Passive & Active filters, Power supplies.Advanced Digital circuits: Logic gates; digital IC families (DTL, TTL, ECL, MOS, and CMOS). Combinatorial circuits: arithmeticcircuits, code converters, multiplexers, decoders, PROMs and PLAs. Sequential circuits: latches and flip-flops, counters and shift-registers. Semiconductor memories. Microprocessors & Microcontroller (8085, 8086, 8051): architecture, programming, memoryand I/O interfacing.Signals and Systems: Definitions and properties of Laplace transform and discrete transform, DFT and FFT, z-transform. LTISystems, convolution, poles and zeros, realization and analysis of Digital Filters. Architecture of DSP Processors, Digital imageProcessing techniques.Control Systems: Basic control system components; block diagrammatic description, reduction of block diagrams. Open loop andclosed loop (feedback) systems and stability analysis of these systems. Signal flow graphs and their use in determining transferfunctions of systems; transient and steady state analysis of LTI control systems and frequency response. Tools and techniques forLTI control system analysis: root loci, Routh-Hurwitz criterion, Bode and Nyquist plots. Control system compensators: elementsof lead and lag compensation, elements of Proportional-Integral- Derivative (PID) control. State variable representation andsolution of state equation of LTI control systems.

Communications Techniques: Random signals and noise: probability, random variables, probability density function,autocorrelation, power spectral density. Analog communication systems, SNR calculations for AM and FM for low noise conditions.Digital communication systems: PCM, DPCM, ASK, PSK, FSK, matched filter receivers, bandwidth consideration and probability oferror calculations for these schemes. Optical Communication, Satellite Communication, Basics of TDMA, FDMA and CDMA andGSM. Information Theory & coding, Secure Communication, Mobile Communication Techniques.Microwave Communication Engineering: Elements of vector calculus: divergence and curl; Maxwell’s equations, wave equation,Waveguides : modes in rectangular waveguides; boundary conditions; cut-off frequencies; dispersion relations. Basics ofpropagation in dielectric waveguide and optical fibers. Basics of Antennas and Wave propagation: Dipole antennas; radiationpattern; antenna gain.

***


BHILAI


Discipline: Mechanical EngineeringSection - I

Engineering Mechanics: Free body and equilibrium; trusses and frames; virtual work; kinematic and dynamics of particles and ofrigid bodies in plane motion, including impulse and momentum (linear and angular) and energy formulations; impact.Strength of Materials: Stress and strain, stress-strain relationship and elastic constants, Mohr’s circle for plane stress and planestrain, thin cylinders; shear force and bending moment diagrams; bending and shear stresses; deflection of beams; torsion of circularshafts; Euler’s theory of columns; strain energy methods; thermal stresses.Theory of Machines: Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of slider-crankmechanism; gear trains; flywheels; governors. Kinematic & dynamic analysis of planar mechanism, Lams, Gears & Gear traine.Vibrations: Free and forced vibration of single degree of freedom systems; effect of damping; vibration isolation; resonance, criticalspeeds of shafts.Design: Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram; principles of the design ofmachine elements such as bolted, riveted and welded joints, shafts, spur gears, rolling and sliding contact bearings, brakes andclutches.Thermodynamics: Zero, First and Second laws of thermodynamics; thermodynamic system and processes; Carnot cycle, irreversibilityand availability; behavior of ideal and real gases, properties of pure substances, calculation of work and heat in ideal processes;analysis of thermodynamic cycles related to energy conversion.Fluid Mechanics: Fluid properties; fluid statics, manometry, buoyancy; control-volume analysis of mass, momentum and energy, fluidacceleration; differential equations of continuity and momentum; Bernoulli’s equation; viscous flow of incompressible fluids;boundary layer; elementary turbulent flow; flow through pipes, head losses in pipes, bends etc.Power Engineering: Steam Tables, Rankine, Brayton cycles with regeneration and reheat, Cogeneration & Combined cycles.I.C. Engines: Air-standard cycles, pre-ignition, detonation & diesel-knock, ignition system, cooling & lubrication system, emission &control, fuel injection & carburetion, supercharging,

measurement of calorific values, engine performance & heat balance sheet.Heat Transfer: Modes of heat transfer; one dimensional heat conduction, resistance concept, electrical analogy, unsteady heatconduction, fins; dimensionless parameters in free and forced convective heat transfer, various correlations for heat transfer in flowover flat plates and through pipes; thermal boundary layer; effect of turbulence; radiative heat transfer, black and grey surfaces,shape factors, network analysis; heat exchanger performance, LMTD and NTU methods.Refrigeration and air-conditioning: Vapour refrigeration cycle, heat pumps, gas refrigeration, Reverse Brayton cycle; moist air;psychrometric chart, basic psychrometric processes.Turbo-machinery: Pelton-wheel, flow of stream through nozzles & diffuses, Francis and Kalpan turbines-impulse and reactionprinciples, velocity diagrams, various types of gas turbines, reciprocating, centrifugal and axial flow compressors, multi-stagecompression.Engineering Materials: Structure and properties of Engineering materials, heat treatment, stress-strain diagrams for engineeringmaterials. Common applications of various materials.Metal Casting: Design of patterns, moulds and cores; solidification and cooling; riser and gating design, design considerations, typesof casting processes.Forming: Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load estimation for bulk (forging,rolling, extrusion, drawing) and sheet (shearing, deep drawing, bending) metal forming processes; principles of powder metallurgy.Joining: Physics of welding, brazing and soldering; adhesive bonding; design consideration in welding.Machining and Machine Tool Operations: Mechanics of machining, single and multi-point cutting tools, tool geometry and materials,tool life and wear; economics of machining; principles of non-traditional machining processes; principles of work holding, principlesof design of jigs and fixtures.Unconventional Machining: EDM, ECM, AJM, LBM, USM, EMB.Metrology and Inspection: Limits, fits and tolerances; linear and angular measurements; comparators; gauge design; interferometry;form and finish measurement; alignment and testing methods; tolerance analysis in manufacturing and assembly.Computer Integrated Manufacturing: Basic concepts of CAD/CAM and their integration tools, Robotic, Robotic Kinematics.Inventory Control: Deterministic and probabilistic models; safety stock inventory control systems.Operation Research: Linear programming, Graphical & Simplex method transportation, assignment, network flow models, simplequeuing models, PERT and CPM, Game Theory.Value Engineering: Value analysis for cost/value.

Industrial Engineering : Production Planning and Control; Forecasting- moving average, exponential smoothing, operationsscheduling, assembly line balancing, product development, break even analysis, capacity planning.

***



Discipline: Chemical Engg.

Section – I

1. Process Calculations and Thermodynamics: Laws of conservation of mass and energy; use of tie components; recycle, bypassand purge calculations; degree of freedom analysis. First and Second laws of thermodynamics. First law application to close andopen systems. Second law and Entropy Thermodynamic properties of pure substances: equation of state and departure function,properties of mixtures: partial molar properties, fugacity, excess properties and activity coefficients; phase equilibria: predictingVLE of systems; chemical reaction equilibria.2. Fluid Mechanics and Mechanical Operations: Fluid statics, Newtonian and nonNewtonian fluids, Bernoulli equation,Macroscopic friction factors, energy balance, dimensional analysis, shell balances, flow through pipeline systems, flow meters,pumps and compressors, packed and fluidized beds, elementary boundary layer theory, size reduction and size separation; freeand hindered settling; centrifuge and cyclones; thickening and classification, filtration, mixing and agitation; conveying of solids.3. Heat and Mass Transfer: Conduction, convection and radiation, heat transfer coefficients, steady and unsteady heatconduction, boiling, condensation and evaporation; types of heat exchangers and evaporators and their design. Fick’s laws,molecular diffusion in fluids, mass transfer coefficients, film, penetration and surface renewal theories; momentum, heat andmass transfer analogies; stage wise and continuous contacting and stage efficiencies; HTU & NTU concepts design and operationof equipment for distillation, absorption, leaching, liquid-liquid extraction, drying, humidification, dehumidification andadsorption.4. Chemical Reaction Engineering: Theories of reaction rates; kinetics of homogeneous reactions, interpretation of kinetic data,single and multiple reactions in ideal reactors, non-ideal reactors; residence time distribution, single parameter model; non-isothermal reactors; kinetics of heterogeneous catalytic reactions; diffusion effects in catalysis.5. Instrumentation and Process Control: Measurement of process variables; sensors, transducers and their dynamics, transferfunctions and dynamic responses of simple systems, process reaction curve, controller modes (P, PI, and PID); control valves;analysis of closed loop systems including stability, frequency response and controller tuning, cascade, feed forward control.

6. Plant Design and Economics: Process design and sizing of chemical engineering equipment such as compressors, heatexchangers, multistage contactors; principles of process economics and cost estimation including total annualized cost, costindexes, rate of return, payback period, discounted cash flow, optimization in design.7. Chemical Technology: Inorganic chemical industries; sulfuric acid, NaOH, fertilizers (Ammonia, Urea, SSP and TSP); naturalproducts industries (Pulp and Paper, Sugar, Oil, and Fats); petroleum refining and petrochemicals; polymerization industries;polyethylene, polypropylene, PVC and polyester synthetic fibers.8. Statistics & Research Aptitude Mean, median, mode, basic concepts of probability, coefficient of variance, standard error,standard deviation, and correlation and regression analysis. Student t-test, F-test, analysis of variance (ANOVA), data graphicsand data interpretation. Principles and various models of statistical optimization techniques, optimization software’s. Nationaland international scenario of scientific research, literature reviewing, reference citation, scientific and research journals, impactvaluation, research article and patent drafting, various scientific websites, abstracts.

***



Discipline: ManagementSection – IGeneral Management

Overview: Functions and Principles of management; Management Thought and Concepts; Management Decision Making Processesand Types.Managerial EconomicsOverview of Micro-Economics: Basic Concepts of Demand and Supply; Demand Analysis; Production Function; Cost-Output Relations;market Structures; Pricing theories; Overview of macro-Economics; National Income Concepts; Budgeting.Behavioral ScienceOverview of Organizational Behaviour; Understanding and managing Individual Behaviour-personality, Perception, Values, Attitudes,Learning and Motivation; Group Dynamics and Team Work. Overview of Organizational Development: Organizational structure;Organizational design; OD Interventions; Change Management.Human Resource managementOverview of HRM: Concepts and Perspectives in HRM; HRM in Changing Environment, Overview of HR Planning: Objectives Processand Techniques; Job Analysis; Recruitment and Selection, Training and Development; Performance Appraisal; Exit Policy, Overview ofIndustrial Relations: Wage Policy and Determination; Trade Unions; Dispute Resolution and Grievance Management; Labour Welfareand Social Security Measures.FinanceOverview of Financial Accounting; Analysis of Balance Sheet Statement, Overview of Cost Accounting: Costing Methods andTechniques, Overview of Financial Management: Fund Flow Analysis; Management of Working Capital, Overview of CapitalBudgeting: Capital Budgeting Decisions; Capital Structure and Cost of Capital. Overview of Dividend Policy: Determinants; Long-termand Short-term Financing Instruments; Mergers and Acquisitions.Marketing ManagementOverview of Marketing: Marketing Mix, Market Segmentation, Targeting and Positioning; Overview of Product Management; ProductMix Decisions; Product Life Cycle, New Product Development, Branding; Pricing Methods and Strategies. Overview of Promotional

Management: Promotion Mix; Advertising; Personal selling; Channel Management; Evaluation and Control of Marketing Effort;Marketing of Services; Customer Relation management. Overview of E-Marketing: Uses of Internet as Marketing Medium; Issues inBranding, Market Development, advertising and Retailing on Internet.Production ManagementOverview of Production management: Demand Forecasting for Operations; Production Scheduling; Work Measurement; time andMotion Study; Statistical Quality Control; Facility Location; Layout Planning. Overview of Operations Research: Linear programming;Transportation model; Inventory control; Queuing theory; Decision theory; PERT/CPM.Quantitative TechniquesOverview of Probability: Types of Probability distributions (e.g. Binomial, Poisson, Normal and Exponential). Overview of Sampling:Sampling distributions; Tests of Hypothesis; Large and small samples. Univariate and Bivariate Data Analysis: t-test, z-test, Chi-squaretests; ANOVA.Information SystemOverview of MIS: Application of Information Systems in management; MIS and Decision Making; System Analysis and Design.Overview of E-Commerce: e-commerce Business models; e-marketing; security issues in electronic commerce, legal issues inelectronic commerce. Overview of ERP: Role of ERP in information integration; Evolution of ERP.Strategic ManagementOverview of Strategic Management: Concept of Corporate Strategy; BCG Model; Porter’s Generic Strategies; Competitor Analysis.Overview of Strategy Formulation and Implementation: Strategy Formulation and implementation at Corporate and Business level.Global Strategic Management: Transnationalization of World Economy; Managing Cultural Diversity; Global Entry Strategies;Managing International Business; CompetitiveAdvantage of Nations.EntrepreneurshipOverview of Entrepreneurship: Theories of entrepreneurship; Innovation and Entrepreneurship. Small Business Concepts:Government policy for Promotion of Small and Medium Enterprises; Process of Business Opportunity Identification; DetailedBusiness Plan Preparation; Managing Small Enterprises; Planning for Growth; Sickness in Small Enterprises; Rehabilitation of SickEnterprises; Entrepreneurship (Organizational Entrepreneurship).

Ethics in BusinessOverview of Ethical issues in Business: Value Based Organizations; Ethical Issues on Individual in Organizations; Gender Issues;Ecological Consciousness; Environmental Ethics; Social Responsibilities of Business; Corporate Governance and Ethics; Benefits ofCorporate Social Responsibility.

***



Discipline: Applied Chemistry

Section - IPhysical ChemistryStructure: Quantum theory : principles and techniques; applications to a particle in a box, harmonic oscillator, rigid rotor andhydrogen atom; valence bond and molecular orbital theories, Huckel approximation; approximate techniques: variation andperturbation; symmetry, point groups; rotational, vibrational, electronic, NMR, and ESR spectroscopy.Equilibrium : Kinetic theory of gases; First law of thermodynamics, heat, energy, and work; second law of thermodynamics andentropy; third law and absolute entropy; free energy; partial molar quantities; ideal and non-ideal solutions; phase transformation:phase rule and phase diagrams –one, tow, and three component systems; activity, activity coefficient, fugacity, and fugacitycoefficient; chemical equilibrium, response of chemical equilibrium to temperature and pressure; colligative properties; Debye-Huckel theory; thermodynamics of electrochemical cells; standard electrode potentials; applications – corrosion and energyconversion; molecular partition function (translational, rotational, vibrational, and electronic).Kinetics : Rates of chemical reactions, temperature dependence of chemical reactions; elementary, consecutive, and parallelreactions; steady state approximation; theories of reaction rates – collision and transition state theory, relaxation kinetics, kinetics ofphotochemical reactions and free radical polymerization, homogeneous catalysis, adsorption isotherms and heterogeneous catalysis.INORGANIC AND ANALYTICAL CHEMISTRYMain group elements : General characteristics, allotropes, structure and reactions of simple and industrially important compounds:boranes, carboranes, silicones, silicates boron nitride, borazines and phosphazenes. Hydrides, oxides and oxoacids of pnictogens (N,P), chalcogens (S, Se & Te) and halogens, xenon compounds, pseudo halogens and interhalogen compounds. Shapes of moleculesand hard – soft acid base concept. Structure and Bonding (VBT) of B, Al, Si, N, P, S, Cl compounds. Allotropes of carbon: graphite,diamond, C60. Synthesis and reactivity of inorganic polymers of Si and P.Transition Elements : General characteristics of d and f block elements; coordination chemistry: structure and isomerism, stability,theories of metal – ligand bonding (CFT and LFT), mechanisms of substitution and electron transfer reactions of coordinationcomplexes.

Electronic spectra and magnetic properties of transition metal complexes, lanthanides and actinides. Metal carbonyls, metal – metalbonds and metal atom clusters, metallocenses; transition metal complexes with bonds to hydrogen, alkyls, alkenes, and arenes;metal carbons; use of organometallic compounds as catalysts in organic synthesis. Bioinorganic chemistry of Na, K, Mg, Ca, Fe, Co, Zn,Cu and Mo.Solids: Crystal systems and lattices, miller planes, crystal packing, crystal defects; Braggs Law, ionic crystals, band theory, metals andsemiconductors, Different structures of AX, AX2, ABX3 compounds, spinels.Instrumental methods of analysis : Atomic absorption and emission spectroscopy including ICP-AES, UV-visible spectrophotometry,NMR, mass, Mossbauer spectroscopy (Fe and Sn), ESR spectroscopy, chromoatography including GC and HPLC and electro- analyticalmethods (Coulometry, cyclic voltammetry, polarography, amperometry, and ion selective electrodes).ORGANIC CHEMISTRYStereochemistry: Chirality of organic molecules with or without chiral centres. Specification of configuration in compounds havingone or more stereogenic centres. Enantiotopic and diastereotopic atoms, groups and faces. Stereoselective and stereospecificsysnthesis. Conformational analysis of acyclic and cyclic compounds. Geometrical isomerism. Configurational and conformationaleffects on reactivity and selectivity/specificity.Reaction mechanism : Methods of determining reaction mechanisms. Nucleophilic and electrophiclic substitutions and additions tomultiple bonds. Elimination reactions. Reactive intermediates- carbocations, carbanions, carbenes, nitrenes, arynes, free radicals.Molecular rearrangements involving electron deficient atoms.Organic synthesis : Synthesis, reactions, mechanisms and selectivity involving the following alkenes, alkynes, arenes, alcohols,phenols, aldehydes, ketones, carboxylic acids and their derivatives, halides, nitro compounds and amines. Use of compounds of Mg,Li, Cu, B and Si in organic synthesis. Concepts in multistep synthesis – retro synthetic analysis, disconnections, synthons, syntheticequivalents, reactivity umpolung, selectivity, protection and deprotection of functional groups. Pericyclic reactions: Electrocyclic,cycloaddition and sigmatropic reactions. Orbital correlation FMO and PMO treatments.Photochemistry : Basic principles, Photochemistry of alkenes, carbonyl compounds, and arenes, Photo oxidation and photoreduction, Di-fi- methane rearrangement, Barton reaction. Heterocyclic compounds: Structure, preparation, properties and reactionsof furan, pyrrole, thiophene, pyridine, indole and their derivatives.Biomolecules : Structure, properties and reactions of mono and disaccharides, physicochemical properties of amino acids, chemicalsynthesis of peptides, structural features of proteins, nucleic acids, steroids, terpenoids, carotenoids, and alkaloids.

Spectroscopy: Principles and applications of UV-visible, IR, NMR and Mass spectrometry in the determination of structures of organic molecules.

***



Discipline: Applied Mathematics

Section - I

Linear Algebra: Finite dimensional vector spaces; Linear transformations and their matrix representations, rank; systems of linearequations, eigen values and eigen vectors, minimal polynomial, Cayley-Hamilton Theroem, diagonalisation, Hermitian, Skew-Hermitian and unitary matrices; Finite dimensional inner product spaces, Gram- Schmidt orthonormalization process, self-adjointoperators.Complex Analysis : Analytic functions, conformal mappings, bilinear transformations; complex integration; Cauchy’s integral theoremand formula; Liouville’s theorem, maximum modulus principle; Taylor and Laurent’s series; residue theorem and applications forevaluating real integrals.Real Analysis : Sequences and series of functions, uniform convergence, power series, Fourier series, functions of several variables,maxima, minima; Riemann integration, multiple integrals, line, surface and volume integrals, theorems of Green, Stokes and Gauss;matric spaces, completeness, Weierstrass approximation theorem, compactness; Lebesgue integral, Fatou’s lemma, dominatedconvergence theorem.Ordinary Differential Equations : First order ordinary differential equations, existence and uniqueness theorems, systems of linearfirst order ordinary differential equations, linear ordinary differential equations of higher order with constant coefficients; linearsecond order ordinary differential equations with variable coefficients; method of Laplace transforms for solving ordinary differentialequations, series solutions; Legendra and Bessel functions and their orthogonality.Algebra: Normal subgroups and homomorphism theorems, automorphisms; Group actions, Sylow’s theorems and their applications;Euclidean domains, Principle ideal domains and unique factorization domains. Prime ideals and maximal ideals in commutative rings;Fields, finite fields. Functional Analysis: Banach spaces, Hahn-Banach extension theorem, open mapping and closed graph theorems,principle of uniform boundedness; Hilbert spaces, orthonormal bases, Riesz representation theorem, bounded linear operators.Numerical Analysis : Numerical solution of algebraic and transcendental equations; bisection, secant method, Newton-Raphsonmethod, fixed point iteration; interpolation; error of

polynomial interpolation, Lagrange, Newton interpolations; numerical differentiation; numerical integration; Trapezoidaland Simpson rules, Gauss Legendra quadrature, method of undetermined parameters; least square polynomialapproximation; numerical solution of systems of linear equations; direct methods (Gauss elimination, LU decomposition);iterative methods (Jacobi and Gauss-Seidel); matrix eigenvalue problems; power method, numerical solution of ordinarydifferential equations; initial value problems; Taylor series methods, Euler’s methods, Runge-Kutta methods.Partial Differential Equations: Linear and quasilinear first order partial differential equations, method of characteristics;second order linear equations in tow variables and their classification; Cauchy, Dirichlet and Neumann problems; solutionsof Laplace, wave and diffusion equations in two variables; Fourier series and Fourier transform and Laplace transformmethods of solutions for the above equations. Mechanics: Virtual work, Lagrange’s equations for holonomic systems,Hamiltonian equations.Topology : Basic concepts of topology, product topology, connectedness, compactness, countability and separation axioms,Urysohn’s Lemma.Probability and Statistics : Probability space, conditional probability, Bayes theorem, independence, Random variables,joint and conditional distributions, standard probability distributions and their properties, expectation, conditionalexpectation, moments; weak and strong law of large numbers, central limit theorem; Sampling distributions; Testing ofhypothesis, standard parametric tests based on normal, Chi- Square, t, F – distributions; Linear regression; Intervalestimation.Linear programming: Linear programming problem and its formulation, convex sets and their properties, graphical method,basic feasible solution, simplex method, big-M and two phase methods; infeasible and unbounded LPP’s, alternate optima;Dual problem and duality theorems, dual simplex method and its application in post optimality analysis; Balanced andunbalanced transportation problems, u- v method for solving transportation problems; Hungarian method for solvingassignment problems.Calculus of Variation and Integral Equations: Variation problems with fixed boundaries; sufficient conditions for extremum,linear integral equations of Fredholm and Volterra type, their iterative solutions.

***



Discipline: Applied Physics

Section - I

Mathematical Physics: Dimensional analysis; Vector algebra and vector calculus; Linear algebra, matrices; linear differentialequations; Finite difference methods; Elementary probability theory, binomial, Poisson and normal distributions. Fourier series,Fourier and Laplace transforms; Elements of complex analysis.Classical Mechanics: Newton’s laws; central forces, Kepler problem and planetary motion; collisions and scattering in laboratory andcentre of mass frames; mechanics of system of particles; rigid body dynamics; moment of inertia tensor; non inertial frames andpseudo forces; variational principle; Lagrange’s and Hamilton’s formalisms; equation of motion, cyclic coordinates, Poisson bracket;periodic motion, small oscillations, normal modes; special theory of relativity – Lorentz transformations, time dilation, lengthcontraction, relativistic kinematics, variation of mass with velocity, mass- energy equivalence, relation between energy andmomentum.Electromagnetic Theory : Electrostatics : Gauss’ Law and its applications; Laplace and Poisson equations, boundary value problems;Magneto statics: Biot-Savart law, Ampere’s theorem,; dielectrics and conductors; dielectric polarization; Concept of internal field;electromagnetic induction Faraday’s law; Maxwell’s equations; scalar and vector potentials; Electromagnetic waves and theirreflection, refraction, interference, diffraction and polarization. Poynting vector, energy and momentum of electromagnetic waves;radiation from a moving charge.Quantum Mechanics: Physical basis of quantum mechanics; Wave – particle duality; De-Broglie hypothesis; electron and neutrondiffraction experiment, wave packet and group velocity, wave function and probability interpretation, quantization of atomic energy,Heisenberg’s uncertainty principle; Schrodinger equation (time-dependent and time-independent); Eigen value problems such asparticle-in-a-box, harmonic oscillator, etc; Tunneling through a barrier; Orbital angular momentum.Thermodynamics and Statistical Physics : Laws of thermodynamics and their consequences; macro states and microstates; phasespace; probability ensembles; partition function, free energy, calculation of thermodynamic quantities; classical and quantumstatistics;

degenerate Fermi gas; black body radiation and Planck’s distribution law; Bose-Einstein condensation; first and second order phasetransitions. Atomic and Molecular Physics : Quantum states of an electron in an atom; Electron spin; Spectra of one-and many-electron atoms; Relativistic corrections for energy levels of hydrogen; Hyperfine structure and isotopic shift; width of spectral lines;LS & JJ coupling; Zeeman, Paschen Back & Stark effect; X-ray spectroscopy; Electron spin resonance, Nuclear magnetic resonance,chemical shift; Rotational, vibration, electronic, and Raman spectra of diatomic molecules; Spontaneous and stimulated emission,Einstein A & B coefficients; Lasers, optical pumping, population inversion, rate equation; Modes of resonators and coherence length.Temporal and spatial coherence.Solid State Physics: Atomic structure and bonding in materials. Crystal structure of Materials, unit cells and space lattices,determination of structures of simple crystals by x-ray diffraction, miller indices of planes and directions, Concept of amorphous,single and polycrystalline structures and their effect on properties of materials. Crystal growth techniques. Imperfections incrystalline solids and their role in influencing various properties; free electron theory; band theory of solids; metals, semiconductorsand insulators; types of semiconductors & conduction mechanism, Hall effect; Diamagnetism, Para magnetism, and ferromagnetism;Electron motion in a periodic potential, Superconductivity, type-I and type-II superconductors, Joseph son junctions.Nuclear and Particle Physics : Basic nuclear properties; size, shape, charge distribution, spin and parity; mass defect, Binding energy,semi-empirical mass formula; Liquid drop model; Nature of the nuclear force, nuclear shell model; Alpha decay, Beta-decay, gammadecay, Laws of radioactivity, Rutherford scattering, nuclear reactions, reaction mechanisms, compound nuclei and direct reactions;conservation laws; controlled and uncontrolled chain reaction critical mass, multiplication factor, fission and fusion; nuclear reactor,particle accelerators and detectors; mass spectrographs, elementary particles.Electronics: Semiconductor device physics: including diodes, junctions, depletion region, barrier potential, Fermi level, biasing,transistors, Bipolar Junction Transistors, field effect Transistors, amplifier and oscillator circuits; operational amplifier, negativefeedback circuits, rectifier circuits, regulated power supplies; logic gates & symbols, Boolean algebra, De-Morgan’s Theorem, basicdigital logic circuits, Optoelectronic devices, including solar cells, photo detectors, and LEDs; Digital techniques andApplications (registers, counters, comparators and similar circuits); A/D and D/Aconverters.

***



Discipline: Pharmacy

Section – IPharmacognosy & Phytochemistry : Chemistry test, isolation and characterization of phytopharmaceuticals belonging to the groupof Alkaloids, Glycosides, Terpenoids, Steroids, Purines, Guggual lipids, Pharmacognosy of crude drugs that contain the aboveconstituents. Standardization of raw materials and herbal products. Biotechnological principles and techniques for plantsdevelopment. Tissue culture.Pharmacology & Toxicology: General pharmacological principle including Toxicology. Drug interaction, Pharmacology of drugs actingon Central nervous system, Cardiovascular system, Autonomic nervous system, Gastro intestinal system and Respiratory system.Pharmacology of Autocoids, Hormones, Hormone antagonists,Chemotherapeutic agents including anticancer drugs. Bioassays, Immuno Pharmacology. Drugs acting on the blood & blood formingorgans. Drugs acting on the renal system.Medicinal Chemistry : Introduction to drug design, Structure, Classification, Synthesis, SAR and uses of the following category ofdrugs – Hypnotics and Sedatives, NSAIDS, Neuroleptics, Antidepressants, Anxiolytics, Anticonvulsants. Local Anesthetics, CardioVascular drugs – Antianginal agents, Vasodilators, adrenergic & Cholinergic drugs, Diuretics, Antihypertensive drugs, Hypoglycemicagents, Antilipedmic agents. Chemotherapeutic agents, Antibiotics, Sulphadrugs, Antitubercular, Preparation, storage and uses ofofficial Radiopharmaceuticals.Pharmaceutics & Pharmaceutical Jurisprudence: Development, manufacturing standards, Q.C. limits, labeling of Tablets, Capsulesand Parenterals as per the pharmacopoeal requirements. Storage of different dosage forms and new drug delivery systems(Nanoparticle, Occular drug delivery system and Transdermal drug delivery systems). Bio-pharmaceutics and Pharmacokinetics andtheir importance in formulation. Formulation and preparation of cosmetics –lipstick, shampoo, creams, nail preparations anddentifrices. Pharmaceutical calculations. Drugs and cosmetic Act and rules withrespect to manufacture, sales and storage, Pharmacy Act.Pharmaceutical Chemistry (Analysis): Principles, instrumentation and applications oaf the following: Absorption spectroscopy (UV &IR). Fluorimetry, Flame photometry, Potentiometry, Conductometry and Plarography, Principles of NMR, Mass Spectroscopy, X-ray

diffraction analysis and different chromatographic methods (TLC, HPLC, HPTLC and GC).

Biochemistry: Metabolism of Carbohydrate, lipids and proteins, Biochemical role of Vitamins, Enzymes, Nucleic acids. Generalprinciples of immunology. Methods of determine kidney & liver function.

Microbiology: Principles and methods of microbiological assays of the Pharmacopoeia. Methods of preparation of official sera andvaccines, Serological and diagnostics tests. Application of microorganisms in Pharmaceutical industry.

***



Discipline: Humanities

Section – I & II

I. Phonetics and Phonology of English & Modern English GrammarGeneral Phonetics and Phonology, Production of speech, Structural Phonology, Grammar & Various kinds of Grammar; Notions ofGrammaticality and Acceptability; Traditional, Structural and Generative Models, Morphology & Morphophonemics and Syntax.II. Applied LinguisticsScope and Definition of Applied Linguistics, Traditional Approach to Linguistics Structural Approach to Linguistics and CognitiveApproach to LinguisticsIII. LiteratureLiterary forms : Prose, poetry and drama.British Literature: Chaucer, Shakespeare, Milton, Alexander Pope, John Keats, Byron, P B Shelly, William Wordsworth, RobertBrowning, Arnold, John Dryden, S T Coleridge, G B Shaw, D H Lawrence, E M Foster, W B Yeats, George Orwell.American Literature: T S Eliot, W H Auden, Eugene O’Neill, Emerson, Thoreau, Hawthorne, Thomas Hardy, Ernest Hemingway, WaltWhitman, Emily Dickenson, Robert Frost, Silvia Plath, Tennyson, Mark Twain, Ezra pound, Allen Tate, Virginia Woolf, TennesseeWilliams.Indo-Anglean Literature : Henry Derozio, Toru Dutt, Sarojini Naidu, Rabindranath Tagore, Aurobindo Ghosh, Girish Karnad, RajaRao, Mulk Raj Anand, R K Narayan, Kamala Markandaya, Nissim Ezekiel, Kamala Das, Khushwant Singh, Salman Rushdie, VikramSeth, V S Naipaul, Arundhati Roy, Anita Desai.Critical Theories: Aristotle, Longinus, Eliot, William Wordsworth, Coleridge, Mathew Arnold, Eliene Showalter, Psycho-AnalyticCriticism and Feminist Criticism.IV. Research Methodology:Basic Concepts of Research, Research methods, Strategies and Study SkillsV. Professional Communication:Basic Concepts, Report Writing Presentation Skills, Interpersonal Skills, Organizational Behaviour and Communication.

***


Ph.D. Entrance Examination Scheme, 2017Maximum Marks – 100 Duration of Examination – 3 hrs

Section – I

Consisting of 40 objective type questions from relevant discipline of the syllabus.

Section – II

Consisting of 60 objective type questions from any of the specialization of the relevantdiscipline of the syllabus.

The weightage for section I shall be 40% & section II shall be 60%.

CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY, BHILAISyllabus Index Section - II (Specialization)

S.No Discipline Specialization

1 Applied Chemistry

Reaction dynamics and surface chemistry

Organic Chemistry

Environmental Chemistry


Celesial Mechanics

Fuzzy Logic / Game Theory/Algebra

Fixed Point Theory and Application

3 Applied Physics

Biomedical Physics

Nano Science & Applications

Luminescence & Applications

Solid State Ionics & Material Science

4 Civil Engg.

Structural Engineering

Highways Engineering

Environmental Engineering

Geotechnical Engineering

Water Resources / Irrigation Engineering


Artificial Intelligence & Soft Computer

Data Mining & Knowledge Discovery

Discrete Structure

Software Engg.

Sementic Web & Linked Dta

6 Computer Science & Engg.

Artificial Intelligence and Soft-computing

Data Mining and Big Data

Digital Image Processing and Computer Vision

Advanced Computer Network and Security

Simulation and Modeling

7 Electrical and Electronics Engg.

Power Systems

Electrical Machines

Control Systems & Instrumentation

Power Electronics & Electric Drive

Soft Computing

Advanced Signal Processing and Applications

8 Electrical Engineering

Power Systems

Electrical Machines

Control Systems & Instrumentation

Power Electronics & Electric Drive

Soft Computing

9 Electronics and Telec. Engg.

Electronics

Communication Systems

Digital System Design & VLSI Design

Signal and Image Processing

Microwave Engineering

Soft Computing

10 Information Technology

Information Security and Coding

Mobile and Pervasive Computing

Data Science for Internet of Things

Pattern Recognition, Image Processing and Data Mining

Semantic Web and Linked data

Remote Sensing and GIS

11 Management

Behavioral Science

Entrepreneurship

Finance Management

Human Resource Management

Marketing Management

Operation and Production Management


Design Stream

Thermal Stream

Production Stream

13 BiotechnologyBioinformatics

Microbiology

14 Chemical Engg.

Process Calculations and Thermodynamics

Fluid Mechanics and Mechanical Operations

Heat and Mass Transfer

Chemical Reaction Engineering

Instrumentation and Process Control

Plant Design and Economics

Chemical Technology

Statistics & Research Aptitude

15 Pharmacy

Pharmaceutics

Pharmacognosy

Pharmacology

Quality Assurance

Pharmaceutical Chemistry

16 Humanities English

CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY, BHILAISyllabus for Entrance Examination in Ph.D. Programme 2017

Discipline: Bio-TechnologySection - II

Specialization A: MicrobiologyDiversity of Prokaryotic and Eukaryotic MicrobesArchaea, Bacteria, Fungal Systematics and diversity, Fungal endophytes of tropical plants and their applications, Mycorrhizalfungi, Agriculturally important toxigenic fungi, Secondary metabolites from fungi, Genomics and Biodiversity of yeast,Antagonistic interactions in yeasts, Biotechnological applications of yeasts, Algal diversity from morphology to molecules.Microbial Physiology and MetabolismGrowth and cell division, Solute Transport, Central Metabolic Pathways and Regulation, Nitrogen metabolism, Metabolism oflipids and hydrocarbons, Metabolism of nucleotides, Physiological Adaptations and Intercellular signalling.

VirologyI - Animal Viruses: Classification , Morphology and Chemistry of Viruses, Working with viruses, Virus replication Strategies,Replication patterns of specific viruses, Subviral pathogens, Pathogenesis of viral infection, Anti-viral strategies –prevention andcontrol of viral diseases.

II – Plant and microbial viruses: History and development of plant virology, cryptograms and classification of plant viruses andviroids, Propagation, Purification, characterization and identification and genomics of plant viruses, Symptoms of plant virusdiseases, transmission of plant viruses, viral and viroid diseases and their control, Microbial viruses.ImmunologyThree fundamental concepts in immunology, Immune cell receptors, Genetic organization,Immune response and signaling, Tolerance and autoimmunity, Immunological disorders andhypersensitivity, Transplantation and tumour immunology.

Molecular BiologyThe nature of Genetic material, DNA replication, Recombination and Repair of DNA,Transcription, Post-transcriptional processes ,Translation, Post-translational Processes,Molecular basis of cell physiology.

Recombinant DNA TechnologyBasics of DNA cloning, Methods of DNA protein analysis, Polymerase Chain Reaction, Construction of DNA and genomic DNAlibraries, Genome sequencing, Transcriptional analysis of gene expression and transcriptomics, Overexpression of recombinantproteins, Analysis of protein-DNA and protein –protein interactions, protein engineering and proteome analysis, Pharmaceuticalproducts of DNA technology, Transgenics and animal cloning.

Microbial GeneticsGenetic analysis of bacteria, Gene transfer and mapping by conjugation, Lytic bacteriophages, Gene transfer by transformation andtransduction, Lysogenic phages, Transposons, Gene regulation.Industrial and Food MicrobiologyIntroduction to industrial microbiology, Downstream processing of microbial products, fermentation economics, Production aspects,Microbiology of foods, Microbial spoilage of foods, Food preservation, Fermentation processes, Food-borne diseases.Environmental MicrobiologyBrief history and development of environmental microbiology, Culture dependent and culture-independent approaches forunderstanding microbial diversity in the environment, Microbial diversity in normal and extreme environments, Global warming,Lignin degradation, Liquid waste management, Solid waste management, Bioremediation of environmental pollutants, Microbes andmineral recovery.Plant – Pathogen InteractionConcepts and physiology of plant diseases, Biochemical basis of plant diseases, Some important plant diseases and their etiologicalstudies, Genetical basis of plant diseases, Disease control, Molecular approach, Disease forecasting.Microbial PathogenicityClassical view of microbial pathogenicity, Molecular microbial pathogenicity, Emeging and re-emerging pathogens, Molecularmicrobial epidemiology, Environmental change and infectious diseases, Antimicrobial resistance, Newer vaccines, Rapid diagnosticprinciples.

***

B: BioinformaticsIntroduction and Bioinformatics Resources: Definition, role, scope different areas and limitations of Bioinformatics.Biological data & databases: Classification of biological database. Architecture and file formats of Nucleic acid sequencedatabases (GenBank, EMBL,and DDBJ), Protein sequence databases (SWISS-PROT, TrEMBL, PIR, and PDB), Small molecule database (PubChem,DrugBank, KEGG, ChemSpider), Gene and protein interaction databases (BioGrid, STRING, IntAct, HPRD).

Biological sequence analysis and Alignment: Prediction of physicochemical properties of genes and proteins based onsequence composition and sequence comparison, Algorithms for pairwise and multiple sequence alignment, concept ofgaps, gap-penalties scoring matrices, Probabilistic methods including hidden markov models, pattern matching, entropymeasures, evolutionary models, and phylogeny, Methods and advanced filtering options available with various sequencealignment programs such as ClustalW, BioEDIT and BLAST etc.

Structural Bioinformatics: Basic properties associated with nucleic acid and proteins structures, RNA folding, RNA loops,Experimental methods available for structural determination of nucleic acids and proteins, Computational methods forstructure validation, protein fold prediction (from homology modeling to ab initio prediction), Algorithms and methodsavailable for predicting and analyzing DNA-protein, protein-protein and protein-ligand interactions, Molecular dynamicssimulation and Monte Carlo simulation, File format and structural analysis tools available at Protein Data bank (PDB),Nucleic Acid Data Bank (NDB), Molecular modeling Data Bank (MMDB), Structure classification Databases (SCOP, CATH,PDBSum) etc., Tools for predicting biological functions from structures, Molecular docking – concept and methods. DrugDiscovery and drug Designing.

Statistical techniques commonly used in biological analysis: Neural Networks, Support Vector Machines, Supervised andunsupervised Learning, Kernel Methods, Normalization ofGene Expression Data, Classification of Gene Expression Data, Statistical Analysis with the Gene Ontology, Classification ofProtein Structures, Statistical methods associated with the analysis of microarray and next generation sequencing (NGS)data. Uni- and multivariate analysis (e.g. ANOVA, correlation, regression, clustering, and ordination), Basic idea of theopen source statistical programming environment R.

Genome and Gene Expression: Genome organization: coding versus non-coding sequences, Composition and biochemistryof basic transcription machinery, Transcription initiation, elongation and termination, Regulatory sequences: promoters,enhancers, suppressors, Application of comparative genomics to identify cis-acting elements, Epigenetics: Chromatinstructure and histone modifications; DNA methylation, Nuclear structure and long range DNA interactions, Transcriptionregulation and development, Regulatory networks: the regulation of regulators, Non-coding RNAs and control of geneexpression, Intergenic and antisense transcription; RNA processing, including alternative splicing and its regulation, Nucleo-cytoplasmic RNA transport, RNA stability and degradation pathways, RNA interference (siRNAs), Translation regulation(microRNAs), Analysis of gene expression, Human transcriptome, Single-gene analyses and techniques, Deep sequencingand micro-arrays.

Molecular Phylogenetic: Principles of Molecular Evolution and Molecular Phylogenetics, Nomenclature, representation, andgeneral concepts of tree structure. Phylogenetic Tree Construction Methods and Programs: Distance-Based Methods,Character-Based Methods, Phylogenetic Tree Evaluation, and Phylogenetic Programs. Phylogenetic analysis tools- Phylip,ClustalW etc.

Modeling of Biological systems: Basic idea of modeling of biological systems, properties of cell components (such asenzyme kinetics), mass and energy balances, stoichiometry and constraint-based modelling, kinetic modelling, MetabolicControl Analysis, General concepts associated with graph theory, topological properties, centrality measurements,robustness and sensitivity analysis of biological networks, Methods and tools for constructing gene regulatory network andprotein interaction network, Prediction of network motifs, modules and subnetworks.

***


Discipline: Civil Engg.

Section - II

Specialization A: Structural Engineering

Advanced Reinforced Concrete Structures

Concrete Technology: Concrete as structural material, strength of concrete and its significance, Strength porosity relationship, Factorseffecting compressive strength, Behavior of concrete under stress states, Durability of concrete and its significance, Sulphate attack,Alkali aggregate reaction, Corrosion of embedded steel in concrete and concrete deterioration due to corrosion of steel and itspreventive measures.Design of Slender Columns: Concentrically loaded slender columns, eccentrically loaded slender columns, Slender columns subjectedto axial and transverse loads, Structural behaviour of columns in braced and unbraced frames, Codal procedure for design of slendercolumns.Flat Slabs: Elements of flat slabs, Codal procedure for design of flat slabs, Behaviour of flat slab in shear, One way and two way shear,Opening in flat slabs, Effect of pattern loading in flat slabs.Design of Beam Column Joints: Types of joints, Joints in maltistoreyed buildings, Forces acting on joints, Design of joints.

Dynamic of StructuresSingle Degree of Freedom Systems: Fundamental, Mass spring damper system, Analysis of free vibrations, Response to harmonicloading, periodic loading, Impulsive loading and general dynamic loading. Generalised SDOF, Vibration analysis by Rayleigh method.Multi Degree of Freedom Systems: Two degree of freedom system – undamped, free & forced. Multidegree of freedom system-undamped, Holter method, Stodola’method, Orthogonality condition, Damped system. Dynamic analysis and Response- ModalAnalysis, Response spectrum analysis, Rayleigh’s-Rit z method.Structures with Distributed Mass and Load: Axial, shear and transverse vibration due to bending of beams, Uniform shear beam,Beam in bending, Numerical techniques for shear beam, Bending of beams, Forced vibration, Plates or slabs subjected to normalloads.Earthquake Motion and Response: Introduction, Strong motion earthquake, Numerical method for spectra, Elastic spectra, Groundvelocity and displacement, Inelastic spectra, Equivalent linear system, Comparison of an elastic and inelastic system.A seismic Design of Structures: Design data and philosophy of design, Seismic co-efficient, permissible increase in stress and loadfactor for multistoreyed buildings, Base shear, Fundamental time period of buildings, Distribution of forces along the height, Dynamicanalysis using IS: 13912, Earthquake resistant construction of buildings, Ductility provision in reinforced concrete construction ofstructures, Design of water towers, Stack like structures.

Advanced Steel StructuresConcept of Plastic Design: Introduction, Theory of plastic bending, Assumptions, Bending of rectangular section, Plastic hinge,Redistribution of moments, Computation of plastic moment, Shape factor, Overload factor, Method of plastic analysis : StaticalMethod, Mechanism method, Upper bound, Lower bound and uniqueness theorem, Partial, Complete and over complete failure ofindeterminate structures.Plastic Analysis of Frames: Plastic analysis of portal frames subjected to transverse and lateral loads, Analysis of gable frames,Analysis of multibay multistoreyed frames, Moment balancing method. Deflections: Assumption, Calculation of deflection at ultimateloads, Deflection at working loads, Rotation capacity. Secondary Design Consideration: General, Influence of axial force on the plasticmoment, Influence of shear force, Local buckling of flanges and webs, Lateral buckling.

Advanced Structural Analysis

Stiffness Method: Basis of stiffness method, Influence coefficients, Kinematic indeterminacy, Degree of freedom, Actiondisplacement relationship, Direct stiffness approach, Transformation of axes system, Representing the imposed loads as nodal loads,Elastic supports, Support displacements, Application to various type of structures e.g. Continuous beams, Trusses, Frames and grids,Temperature effects.Flexibility Method: Particular solution, Complimentary solution, Compatibility equations, Flexibility coefficients, Application ofcomplimentary energy principles, Basis of the method, Numerical integration for flexibility coefficients, Application to various type ofstructures, Elastics supports, Supports displacement, Temperature shrinkage, Imperfect fit, Analysis of pin jointed trusses, Rigidframes.Finite Element Method: Introduction, Basic steps in finite element method, Coordinate systems, Rotation of axes, Shape functions,Elements stiffness matrix and load vector, Triangular element in plane stress and strain, Numerical integration, Isoperametricelements, Rectangular elements in plate flexure, Triangular element in plate flexure, Rectangular element in plane stress and bendingcombined, Computer programs for these elements.

B: Highways Engineering

Geometric Design

Geometric design standards of Highways: Controls and Criteria for geometric design, basic requirements, Design vehicle, Design ofcapacity, level of service, design of camber, design methods used in field, design of cross-section elements, design and analysis ofdifferent sight distances IRC specifications for design.Design of Horizontal Alignment: Design and analysis of super elevation, methods for eliminating camber and buildings superelevation in the field, design of extra widening, methods for providing extra widening in the field, design of transition, design ofcombined curve, IRC specifications for design.Design of Vertical Alignment: Design of gradients, basic criteria and methods for designing summit and & valley vertical curves, IRCspecification for design.Geometric Design of Inter-sections: Design elements of intersections, elaborate design of rotary intersection, grade separatedintersections, median separators.

Pavement Analysis & Design

Importance and functions of various components of pavement structures, concept of wheel loads and tandem axles, ESWL, vehicledamage factors.Design of Flexible pavements: CBR method of flexible pavement design. Old concepts to be recent concept by IRC-37-2001, Design bygroup index method, Design of low cost roads.Design of rigid pavement: Factors affecting, Analysis of stresses, equivalent wheel load, Westergaard’s analysis, IRC design guidelines,design of joints, tie bars, dowel bars, CRCP, FRC and pre-stressed concrete pavements.

Highway Materials Design & Construction

Bituminous materials and mixes: Terminology, classification, distillation, grades, asphalts and tars, testing methods andspecifications, bitumen aggregate interactive mechanism, design of bituminous mixes.Intermediate and high type bituminous pavements: Concept of macadam roads, Bituminous surface treatments, Road mix andbituminous plant mixes, bituminous bound macadam, asphalt and concrete, Bituminous concrete laying procedures, use ofadmixtures, construction methods and machinery.Rigid pavements: Base course function, design of pavement grade mixes, Construction equipment, methods, quality control andprocedures, pumping, joint fillers and sealants, mix selection, compaction methods and construction procedures for reinforced andpre-stressed pavements.

Advanced Traffic Engineering

Introduction: Traffic characteristics, PIEV theory, Traffic flow Characteristics, capacity and level of service conceptTraffic studies: Traffic Volume, spot speed, speed & delay, axle load surveys, Origin & Destination study, sampling techniques,presentation of traffic data, analysis and applicationsTraffic facilities design: Design of parking facilities, Design of lighting and terminal facilities.Traffic Operations and Control: Traffic regulation, Traffic control devices i.e. signs and markings, design of traffic signals.Traffic Safety: Effect of road conditions on traffic safety, Accident study, presentation and analysis of traffic data, improvementmeasuresIntelligent Transport System: Highway communication, automatic vehicle detection, electronic toll collection system, advanced driverinformation system, simulation of traffic systems.

C: Environmental Engineering

Environmental Chemistry

Basic concepts of chemistry involved in water & wastewater analysis: Basic concepts of General chemistry, Physical chemistry,Equilibrium chemistry, Organic chemistry, Bio chemistry, Colloidal chemistry, Nuclear chemistry. Basic concepts of quantitativechemistry: Sampling Gravimetric analysis, Volumetric analysis, Colourimetry, Spectrophotometry. Industrial Methods of Analysis,Optical Methods; Electric Methods Chromatographic methods.Chemistry of Turbidity, colour, pH, Acidity, Alkalinity Hardness, Residual chlorine, Chlorides, Dissolved oxygen, BOD, COD, Nitrogen,Oil and Grease.

Advanced Wastewater Treatment

Quality characteristics of wastewaters. Physical, chemical & Biological water quality parameters. Water quality requirement; StreamStandards, Potable water standards and waster water Influent standards, Physico- chemical processes involved in Waste watertreatment;Sedimentation, Coagulation & Flocculation, various types of setting, settling tank; principle and design, Grit chamber; principle, typesand design aspects. Filtration: Theory, methods of filtration and their modified forms.Disinfections: Objective and different methods. Organic impurities of waste water, composition of waster water, biological treatment,aerobic and anaerobic processes. Microorganisms in biological treatment and their metabolic kinetics. Kinetics of plug flow andcomplete mix reactors.ASP and its modifications, aeration, objective and methods, design of aeration devices.Bio-filters: various types, Trickling filters and their design. Sludge handling and disposal; Sludge types and composition. Variousmethods of sludge treatment. Sludge digestion tanks. Disposal of sludge. Tertiary treatment of wastewater: objective and methods.

Air Pollution & Control

Introduction, Atmospheric composition, Origin of air pollution, Global implications of air pollution, Classification of air pollutants,Particulars, Hydrocarbons and Gaseous air pollutants. Sources of air pollutants and their health effects. Meteorological aspects of airpollution, Influence of Meteorological aspects on Air Quality: Lapse rate and Dispersions, Wind and Dispersions, Moisture anddispersion, modeling.Air Pollution sampling: Ambient and stack sampling, Ambient Air Quality Monitoring, Engineered systems of air pollution Control:Atmospheric cleansing process, approaches to contaminant control. Control devices for particulate contaminant and gaseouscontaminants.

Environmental Pollution & Management

Water Pollution: Components of water, hydrological cycle and water budget equation, Effects of Environmental Pollution oncomponents of hydrological cycle.

Classification of water pollutants and their sources, Types of water pollution, Sources of water pollution and effect of polluted waterson environment and health. Consequences of polluted water disposal on land, rivers and lakes.

Self purification of river and impoundments. Do sag curve and self purification models. Eutrophication of lakes; Ground waterpollution, Causes and consequences, Artificial recharging of ground waters.

Noise Pollution: Noise & Noise pollution definitions Physical parameters of Noise pollution, Sources and health effects of Noisepollution. Strategies for noise pollution control; Control at sources and control at path. Case studies of Noise Pollution and its control.

E: Geotechnical Engineering

Origin and Classification of soils, and Phase Relationships, Clay minerology, Diffuse double layer, Compaction Effective StressPrinciple, Permeability, Seepage pressure, Quick sand condition, Pheratic lines, Flow nets, Compressibility, Terzaghi’s ConsolidationTheory, Shear Strength, Shear Strength Parameters – total stress and effective stress, Mohrs Circle, Failure Envelope, Stress path

Site Exploration: Methods of soil exploration with relative merits and demerits, Depth and spacing of bore holes, Standardpenetration tests, Plate load tests, Static cone penetration tests etc.Bearing Capacity: Bearing capacity theories, corrections for size, shape, depth, eccentricity of loading, water table etc., Presumptivebearing capacities, Codal provisions

Lateral earth Pressure: Rankine’s and Coloumb’s theories, Earth pressure computation in different soils and surcharge load,Rebhnann’s and Culmann’s construction. Design considerations of earth retaining structures.

Foundations: Shallow Foundations, Pile Foundations (including under-reamed piles), Cassion and Well foundations; Designconsiderations, Codal provisions, Layered soils. Choice of shear strength parameters, Total and differential settlement. Stressdistribution, Consolidation settlement in clays (with correction factors), Immediate settlement, Settlement in sands

Slope Stability: Finite and infinite slopes, Critical failure surface, factor of safety, Causes of failure in earthen dams and remedialmeasures.

Ground Improvement: Mechanical soil stabilization, Mixing additives, Compaction piles, compaction by dynamic loads, Pre-loadingusing sand drain, Reinforced soil

Soil Dynamics: Engineering problems involving soil dynamics; Dynamic loading, Role of inertia; Theory of Vibrations, Types ofmachine foundations, Design criteria for machine foundations, Codal provisions.

F: Water Resources / Irrigation Engineering

Advanced Hydrology: Introduction Precipitation, Water Losses, Runoff, Estimation of average monthly and annual runoff, rainfall -runoff relationships. Analysis of data , Supplementing missing data, consistency of record, hyetograph, mass curve analysis, depthareas duration analysis. Rainfall frequency analysis, estimation of evaporation and evapotranspiration, Synthetic unit hydrograph, S-curve, Unit hydrograph of varied durations, Instantaneous unit hydrograph, conceptual models, Design Flood, Flood ForecastingHydrologic Models.

Fluid Mechanics: Equations of motion in general orthogoral coordinate system, Kinematics of Flow, Hydrodynamics, Boundary LayerTheory, Laminar boundary layer, turbulent boundary layer; stability analysis of the boundary layer, Laminar Flow, Turbulent Flow,Dimensional analysis, similitude and model testing.

Open Channel Flow: Fluid Flow Concepts, Classification of channels basic equation; Uniform flow in rigid boundary channels, Shearstress and its distribution, conveyance of a channel, relation with depth; Gradually varied flow-types and governing equation, non-Prismatic channels; Hydraulic Jumps, Forced hydraulic Jump, Jump in rectangular and nonrectangular channels; Channel Controls,Transitions, Unsteady flow, Waves, Celerity of a wave, Surge, Method of characteristics, Flood Routing,

Water Resources & Planning: Project Planning, Resources Planning, System Engg. Earth and Concrete dam, Types of dams:- Rigiddams, Gravity dams, Arch and buttress dams, Basic principles of design and details of construction, Project Economic. Operation ofreservoirs. Water management Policy during droughts

Irrigation & Drainage design: Soil & Soil Fertility, Water Requirement of crops, Irrigation methods, Management of Irrigation systems,Irrigation works, Water Logging, Drainage, Design of Drainage system. Salinity of soil. Salinity control. Quality of irrigation water

Ground Water Engineering: Ground water in Hydrologic cycle, Ground Water-Inventory, Flow into Well, Construction of Wells,Shallow Well, Replenishment of Ground Water, Investigation of Ground Water, Ground Water Management, Techniques of artificialrecharge, Sea water intrusion into coastal aquifers, multiple well systems ground water development and management.

Water Power Engineering: Development of water power, Estimation of Hydropower potential, Comparison of Hydro, thermal andnuclear power, Flow duration curve, firm power, secondary power, Load and Load duration curves, Load factor, Classification ofhydropower plants, Penstocks:- Alignment, types of penstocks, economic diameter of penstocks.

***


Discipline: Computer Science & Engg.Section - II

Specialization to CSEA) Artificial Intelligence and Soft-computing: Natural Language Processing, AI v/s ANN, Neural Networks, Difference between ANNand human brain, characteristics and applications of ANN, single layer network, Perceptron training algorithm, Linear separability,Widrow& Hebb’s learning rule, Delta rule, Associative Memory, Fuzzy set theory, Fuzzy set versus crisp set, Crisp relation & fuzzyrelations, crisp logic, fuzzy logic, introduction & features of membership functions, fuzzy propositions, formation, decomposition &aggregation of fuzzy rules, fuzzy reasoning, fuzzy inference systems, fuzzy decision making & Applications of fuzzy logic, GAencoding,fitness function, reproduction, Particle Swarm Optimization, Ant Colony Optimization.B) Data Mining and Big Data: Basic Data Mining Tasks, Data Mining Issues, Data Mining Metrics, Data Mining from a DatabasePerspective, Clustering, Classification and prediction models, Pattern mining and association rules, Apriori principle, Mining high-frequency patterns and high-confidence rules, Interestingness measures for patterns and rules, Big data and social sensing, Big dataacquisition, Web scraping, crawling, crowdsourcing, crowd-sensing, Big data technologies and platforms, basic concept of cloudcomputing, virtualization.C) Digital Image Processing and Computer Vision: Image Processing and Computer Vision Background, Image Processing andComputer Vision Applications, Human Perception of Pictures, Digital Image Processing Hardware, Image Model, Amplitudedigitization, Intensity Quantization, Spatial co-ordinate digitization, Image Sampling, Image Quality, Image Pixel Relationships, LinearOperators, 2-D Transforms, Spatial Domain Methods, Frequency Domain Methods, Inverse Filtering, Image Compression,Redundancy Types, Lossless and Lossy Compression, Image Compression Standards, Object Detection Methods, Edge Liking andBoundary Detection, Thresholding Methods, Region Oriented Methods. Object Representation and Description, Representationschemes, Description, Pattern Recognition, Decision Theoretic Methods for Recognition.

D) Advanced Computer Network and Security: Routing algorithms, Congestion control algorithms, Internetworking, Services andelements of Transport protocols, MANET, Introduction to Network Security, Symmetric Encryption and Message Confidentiality,Publickey Cryptography and Message Authentication, Authentication Application, Electronic Mail Security, IP Security, Web Security,Network Management Security, Intruders, Malicious Software Firewalls.E) Simulation and Modeling: Mathematical Model, types of Mathematical models and properties, Procedure of modeling, Graphicalmethod: Barterning model, Basic optimization, Monte-Carlo simulation, Approaches to differential equation: Heun method, Localstability theory: Bernoulli Trials, Classical and continuous models, Case studies in problems of engineering and biological sciences.General techniques for simulating continuous random variables, simulation from Normal and Gamma distributions, simulation fromdiscrete probability distributions, simulating a non – homogeneous Poisson Process and queuing system.

***


Discipline: Information TechnologySection - II

Specialization to ITA) Information Security and Coding: Security Models and Policies, Program Security, Malicious Software, Operating system security,Privacy and Privacy Enhancement Tools, Steganography, Social Engineering, Security threats on Social networks, digital signatureschemes, Interactive Proofs, two-party secure computation, multiparty secure computation, and chosen-ciphertext security,Quantum Cryptography, entropy, relative entropy, mutual information, chain rules, data processing inequality, the asymptoticequipartition property, entropy rates for stochastic processes, arithmetic coding, discrete channels, random coding bound andconverse, Gaussian channels, linear block codes and their properties, hard-decision decoding, cyclic codes, Homomorphic encryption

B) Mobile and Pervasive Computing: Cellular Wireless Networks, GSM, Architecture, Protocols, Connection Establishment FrequencyAllocation, Routing, Mobility Management, Security, GPRS, Wireless LANs and PANs IEEE 802.11 Standard Architecture ServicesNetwork HyperLAN Blue Tooth WiFi WiMAX, Pervasive computing infrastructureapplications Device Technology Hardware,Humanmachine Interfaces, Biometrics, and Operating systems Device Connectivity Protocols, Security, and Device ManagementPervasive Web Application architectureAccess from PCs and PDAs Access via WAP.C) Data Science for Internet of Things: Hardware, SoC, sensors, device drivers, IoT standards, Cloud computing for IoT, Bluetooth,Bluetooth Low Energy, beacons, Introduction to Data Science, Goals of statistical graphics and data visualization, Graphs of Data,Graphs of Fitted Models, Graphs to Check Fitted Models, Principles of graphics, Bayesian inference: combining models and data in aforecasting problem, Bayesian hierarchical modeling for studying public opinion, Bayesian modeling for Big Data, IoT datasets andAPIs by application: Healthcare, Manufacturing, wearables, Energy.

D) Pattern Recognition, Image Processing and Data Mining: Pattern Recognition: Basic Concept of Pattern Recognition, FundamentalProblems in PatternRecognition Systems, Design Concepts and Methodologies, Linear Decision Functions, PatternClassification byDistance Functions, Pattern Classification by Likelihood Functions, Trainable PatternClassifiers - The Deterministic Approach.ImageProcessing: Digital Image Fundamentals, Image enhancement in the Spatial and Frequency, Domain, Image Segmentation,Morphological Image Processing.Data Mining and Soft Computing: Introduction to Data Mining and soft computing, what issoftcomputing? Role of Fuzzy sets, neural networks, Rough Sets, Genetic Algorithm, Wavelets and theirHybridization in Data Mining,Classification and clustering in Data Mining, Multimedia Data Mining.E) Semantic Web and Linked data: Introduction: History of Web, World Wide Web, Internet, Working Mechanism of Web,Importanceof Document on the Web, URL, IRI, Namespace, Domain.Semantic Web: What is Semantic? What is Semantic Web?Semantic Web Road Map, Comparisonbetween Semantic Web and Traditional Web, Semantic Web Layer Cake and TheirSignificance,Vision of Semantic Web, Short Introduction to Ontology.Preliminary Knowledge on XML, RDF, RDFa, Microdata.RDF(Resource Description Framework) & RDF Schema: Introduction to RDF, Different Features andComponents of RDF, Detail Study ofRDF Class, Property, Instances, Restriction, Domain and Range ofProperties and their Use with Examples, Different Notations of RDF:RDF/XML, N3, NTRIPLES, Turtle.Ontology: What is Ontology? Different Types of Ontology (Upper Ontology, Domain Ontologyetc.),Reusability of Ontology, Heterogeneity Problem among Ontologies, Discussion about the Problemand its Solution, DifferentBuilding Blocks of an Ontology (Domain Ontology).Linked Data Web and Semantic Web: Introduction to Linked Data, Relationbetween Linked Data andSemantic Web, Linked Data Principles and Design Consideration, Publishing Linked Data, ConsumingLinkedData, Discussion on Traditional Web of Documents and Web of Data.Introduction to Current Research and Development Work goingon Semantic Web: Introduction toDifferent Stages to Develop a Complete Semantic Web Application and Linked Data, Introduction toDifferent Available Tools.F) Remote Sensing and GIS: Introduction – Perspectives and concept of remote sensing, special applications. GeophysicalRemoteSensing – external fields, magnetic, geophysical remote sensing: Gravity, crust dynamicsseismology. Electromagnetic spectrum; Thephoton, Distribution of Radiant energies, Sensortechnology, Spectral signatures- Interpretation and classification. Signatures andSensors, ImageProcessing & Interpretation, Fundamentals of image processing, image representation, Spatialdomain andtransformation domain image processing, Enhancement techniques using softcomputing tools in spatial as well as spectral domain,optimization based image processing. Featuresand classification techniques, GIS Applications, latest trends of GIS applications.

***


Discipline: Master of Computer ApplicationSection – II

A) Artificial Intelligence & Soft Computing: Heuristic search techniques - Generate and test, Hill climbing, Best first search, Problemreduction, Constraint satisfaction, Means-Ends Analysis. Game Playing - Minimax search procedure, adding alpha-beta cutoffs,additional refinements, Iterative deepening. Knowledge Structures - Semantic Networks, Frames, Conceptual Dependency diagrams,Scripts. Genetic Algorithms - Significance of Genetic operators, termination parameters, Evolving Neural nets, Ant Algorithms. FuzzySet Theory - Classical & Fuzzy set theory, Interval Arithmetic’s, Operations on Fuzzy sets. Natural Language Processing - Steps in NLP,Syntactic processing, Semantic analysis, Discourse and Pragmatic processing, Statistical NLP, Spell checking.B) Discrete Structures: Sets, Relations, Functions, Pigeonhole Principle, Inclusion-Exclusion Principle, Equivalence and partialOrderings, Elementary Counting Techniques, Probability. Models of computation – Finite Automata, Pushdown Automata, Non-determinism and NFA, DPDA and PDAs and Languages accepted by these structures. Grammars, Languages, Non-Computability andExamples of Non-computable problems. Graph- Definitions, paths, connected graphs, regular and bipartite graphs, cycles andcircuits, Tree and rooted tree, Spanning tree, Hamiltonian and Eulerian graph, planar graphs.C) Data Mining and Knowledge Discovery: Types of Data, Data Quality, Data Processing, Measures of Similarity and Dissimilarity.Overview, K-means, Agglomerative Hierarchical clustering, DBSCAN, Classification-Alternative techniques- Nearest Neighborhoodclassifier, Bayesian Classifier, Support Vector Machines: Linear SVM, Separable and Non Separable case. Cluster Evaluation- Overview,Un- supervised Cluster evaluation using cohesion and separation, using the proximity matrix, Scalable clustering algorithms. WebData mining- Web terminology and characteristics, web content mining, web usage mining, web structure mining, Search Engines:Characteristics, Functionality, Architecture, Ranking of web pages, Enterprise search.

D) Software Engineering: System Development Life Cycle (SDLC) – Steps, Water fall model, Prototypes, Spiral Model. SoftwareMetrics, Software Project Management. Software Design – System design, detailed design, and function oriented design, objectoriented design, user interface design, design level metrics. Coding and Testing – Testing level metrics, Software quality andreliability, clean room approach. Software re-engineering.E) Semantic Web and Linked data: Introduction: History of Web, World Wide Web, Internet, Working Mechanism of Web,Importance of Document on the Web, URL, IRI, Namespace, Domain. Semantic Web: What is Semantic? What is Semantic Web?Semantic Web Road Map, Comparison between Semantic Web and Traditional Web, Semantic Web Layer Cake and TheirSignificance, Vision of Semantic Web, Short Introduction to Ontology. Preliminary Knowledge on XML, RDF, RDFa, Microdata. RDF(Resource Description Framework) & RDF Schema: Introduction to RDF, Different Features and Components of RDF, Detail Study ofRDF Class, Property, Instances, Restriction, Domain and Range of Properties and their Use with Examples, Different Notations of RDF:RDF/XML, N3, NTRIPLES, Turtle. Ontology: What is Ontology? Different Types of Ontology (Upper Ontology, Domain Ontology etc.),Reusability of Ontology, Heterogeneity Problem among Ontologies, Discussion about the Problem and its Solution, Different BuildingBlocks of an Ontology (Domain Ontology). Linked Data Web and Semantic Web: Introduction to Linked Data, Relation between LinkedData and Semantic Web, Linked Data Principles and Design Consideration, Publishing Linked Data, Consuming Linked Data, Discussionon Traditional Web of Documents and Web of Data. Introduction to Current Research and Development Work going on SemanticWeb: Introduction to Different Stages to Develop a Complete Semantic Web Application and Linked Data, Introduction to DifferentAvailable Tools.

***


Discipline: Electrical Engineering, Electrical and Electronics Engineering

Section - II

Specialization A)Power Systems:Modern power system operation and control, static and dynamic modeling, Load flow studies, transient stability and small

signal stability of large power systems, Voltage stability: P-V and Q-V curves, static analysis, sensitivity and continuation powerflow method. Introduction to optimization techniques, economic load dispatch of thermal and hydro-thermal plants, lossformula, real and reactive power optimization, optimal power flow, unit commitment, power system security constrainedoptimization, load-frequency control, energy control centers and power system state estimation.Bus impedance and admittance matrices; load flow; voltage control; power factor correction; economic operation; symmetricalcomponents; fault analysis; principles of over-current, differential and distance protection; solid state relays and digitalprotection; circuit breakers; system stability concepts, swing curves and equal area criterion; HVDC transmission.B)Electrical Machines:Single phase transformer ‐ equivalent circuit, phasor diagram, tests, regulation and efficiency; three phase transformers-connections, parallel operation; auto‐transformer; energy conversion principles.DC machines ‐ types, windings, generator characteristics, armature reaction and commutation, starting and speed control of

motors;Three phase induction motors ‐ principles, types, performance characteristics, starting and speed control; single phaseinduction motors.Synchronous machines ‐ performance, regulation and parallel operation of generators, motor starting, characteristics andapplicationsServo and Stepper motors.C)Control Systems & Instrumentation: Transient and steady state analysis of LTI control systems and frequency response. Tools and techniques for LTI control systemanalysis and design: Routh Hurwitz criterion, Root loci, Bode plots. Elements of Proportional Integral Derivative (PID) control.State variable

representation and solution of state equation of LTI control systems. Controllability and observability. Pole placement by state

feedback.

Static and dynamic characteristics of measurement systems, first order and second order systems, error analysis; electromechanical

indicating instruments: AC/DC current and voltage meters, loading effect, extension of instrument ranges, measurement of power and

energy; instrument transformers. AC & DC bridges; resistive, capacitive, inductive transducers, and their signal conditioning; digital

voltmeter and multimeter, oscilloscope, frequency counter; analog-to-digital and digital-to-analog converters.

D)Power Electronics & Electric Drive:

Operating characteristics of power semi-conductor devices, principle of operation of single and three phase ac-dc line commutated

converters, introduction to unity power factor converters. Principle of operation dc-dc (buck, boost, buck-boost, fly-back and forward)

converters. Principle of operation single phase and three phase dc-ac converters, PWM techniques, basis concepts of adjustable speed

dc and ac drives.

E)Soft Computing:

Artificial Neural Networks (ANN): Artificial Neural Networks, Building Blocks of ANN. ANN Terminologies: Architecture, Setting ofWeights, Activation Functions, Mcculloch- Pitts Neuron Model, Hebbian Learning Rule, Perception Learning Rule, Delta Learning Rule.Fuzzy Systems: Fuzzy System: Fuzzy Sets, Properties and Operations - Fuzzy Relations, Cardinality, Operations and Properties of FuzzyRelations, Fuzzy Composition; Fuzzy Variables, Types of Membership Functions.Genetic Algorithm (GA): Biological Terminology, Elements of GA: Encoding, Types of Selection, Types of Crossover, Mutation,Reinsertion, Theoretical Foundation: Schema, Fundamental Theorems of GA.F) Advanced Signal Processing and Applications ( Exclusively for Electrical and ElectronicsEngineering):Discrete time signals and systems, Convolution and frequency response. Discrete time Fourier and z-transforms. Properties, analysisof discrete time systems. The DFT, definition and properties, circular convolution calculation, FFT transform. Relationship betweencontinuous and discrete time systems: sampling time and frequency normalization, discrete time processing of continuous timesignals. Difference equation for digital filters definition and properties. FIR filters, IIR filters, Digital filter design techniques: impulseinvariance, Bilinear transformation, finite difference, window design methods, introduction to multirate DSP, decimation andinterpolation, polyphase decomposition. Adaptive signal processing: time adaptive systems, LMS algorithm. Recursive least squares(RLS) algorithms, least square lattice (LSL) algorithm.

***


Syllabus for Entrance Examination in Ph.D. Programme 2017Discipline: Electronics and Instrumentation Engineering

Section - II

Specialization Process Instrumentation and Process Control:Process characteristics: Incentives for process control, Process Variables types and selection criteria, Process degree of freedom, Theperiod of Oscillation and Damping, Characteristics of physical System: Resistance, Capacitive and Combination of both. Elements ofProcess Dynamics, Types of processes- Dead time, self-Regulating /non self regulating, Linear/non linear, and Selection of controlaction. Study of Liquid Processes, Gas Processes, Flow Processes, Thermal Processes.Analysis of Control Loop: Steady state gain, Process gain, Valve gain, Process time constant, Variable time Constant, Transmitter gain.Analysis of Flow Control, Pressure Control, Liquid level Control, Temperature control, SLPC-features, faceplate, functions, MLPC-features, faceplate, functions, SLPC and MLPC comparison.Review of Systems: Review of first and higher order systems, closed and open loop response. Response to step, impulse andsinusoidal disturbances. Transient response. Block diagrams. Stability Analysis: Frequency response, design of control system,controller tuning and process identification. Bode and Nyquist stability criterion. Special Control Techniques: Advanced controltechniques, cascade, ratio, feed forward, adaptive control, Smith predictor, internal model control. Multivariable Control Analysis:Introduction to state-space methods, Control degrees of freedom analysis and analysis, Interaction, Bristol arrays, Niederlinski index -design of controllers, Tuning of multivariable controllers.Industrial Instrumentation and Automation:Introduction to Industrial Automation, Role of automation in industries, Introduction to the types of manufacturing industries,Introduction to type of automation system, Benefits of automation. Introduction to Automation pyramid, Introduction to automationtools like PAC, PLC, SCADA, DCS, Hybrid DCS with reference to automation pyramid, Comparison of PLC, PAC, and SCADA on the basisof Performance criteria Control system audit, Performance criteria, Development of User Requirement Specifications (URS) forautomation. Functional Design Specifications (FDS) for automation tools.

Process Modeling and Simulation:Mathematical models for chemical engineering systems: Introduction, Use of mathematical models, Scope of coverage, Principles offormation, Fundamental laws, Continuity equation, Energy equation, Equations of motions, Transport equations, Equations of state,Equilibrium, Chemical kinetics. Examples of mathematical models of chemical engineering systems: Introduction, Series ofisothermal, constant hold up CSTRs, CSTRs with variable hold-ups, Two heated tanks, Gas phase pressurized CSTR, Non-isothermalCSTR, Single component vaporizer, Multi-component flash drum, Batch reactor, Reactor with mass transfer, Ideal binary distillation:Batch distillation with holdup, pH systems. General Concepts of Simulation for Process Design: Introduction, Process simulationmodels, Methods for solving non-linear equations, Recycle partitioning and tearing, Simulation examples. Computer simulation:Simulation examples, Gravity flow tank, Three CSTRs in series, Non-isothermal CSTR, Binary distillation column, Multi-componentdistillation column, Batch reactor.Biomedical Signal Processing:

Acquisition, Generation of Bio-signals, Origin of bio-signals, Types of bio-signals, Study of diagnostically significant bio-signalparameters Electrodes for bio-physiological sensing and conditioning, Electrode-electrolyte interface, polarization, The electrode skininterface and motion artifact, biomaterial used for electrode, Types of electrodes (body surface, internal array of electrodes,microelectrodes), Practical aspects of using electrodes Acquisition of bio-signals (signal conditioning) and Signal conversion (ADC’sDAC’s) Processing, Digital filtering, Biomedical signal processing by Fourier analysis, Biomedical signal processing by wavelet (time-frequency) analysis Analysis (Computation of signal parameters that are diagnostically significant), Classification of signals and noise,stationary random signals and non-stationary signals, Principle component analysis, Correlation and regression, Analysis of chaoticsignals Application areas of Bio –Signals analysis EEG- frequency component analysis, ECG- QRS detection, R amplitude, intervaldetection, Phonocardiogram- heart valve disorders etc, EMG analysis.Sampling theorem, z-transforms, linear shift invariant systems, Correlation and convolution, Signal flow graphs for digital networks,Canonical forms -Design of digital filters -IIR and FIR filters. Image Processing: Acquisition, Image representation, Sampling andQuantization, Histograms, Image Quality, Noise in Images, Image enhancement: Histogram equalization and Contrast Enhancement.

Transducer Design and Optical Instrumentation:Review of transducers for various parameters like temperature, pressure, flow, level, humidity, acceleration, vibration, density etc.Design considerations and selection criterion as per standards, Sensor fabrication techniques, process details, and latest trends insensor fabrication, fiber optics sensors, electromechanical sensors, Solid state chemical sensors, Bio-sensors, Piezo-resistive sensors,characterization of sensors, effect of sensors on process identification, signal conditioning techniques.

Optical fiber waveguide - total internal reflection, and electromagnetic mode theory of optical propagation, cylindrical fiber,manufacturing of optical fiber. Transmission characteristics of optical fiber -Attenuation, material absorption losses, scattering losses,nonlinear and linear scattering, dispersion, intermodal dispersion, dispersion modified single mode fiber, dispersion flattened fibers,polarization, nonlinear phenomena. Optical sources and detectors - Optical fiber sensors -Introduction to fiber optics sensors,sensors based on intensity modulation, application of optical fiber for displacement, strain, stress and pressure measurement. Activemultimode FO sensors, micro-bend optical fiber sensors, current sensors, phase modulated, polarization modulated optical fibersensors, fiber optic gyroscope. LASER applications - Introduction, application of LASER in biomedical instrumentation, LASERinterferometry, performance parameters, LASER telemeters, measurement of distance, LIDAR, holography: basic principle ofholography, measurement of strain, stress, bending moments and vibrations using hologram.Soft Computing:Artificial Neural Networks: Building Blocks of ANN. ANN Terminologies: Architecture, Setting of Weights, Activation Functions,Mcculloch- Pitts Neuron Model, Hebbian Learning Rule, Perception Learning Rule, Delta Learning Rule. Fuzzy System: Fuzzy Sets,Properties and Operations - Fuzzy Relations, Cardinality, Operations and Properties of Fuzzy Relations, Fuzzy Composition; FuzzyVariables, Types of Membership Functions. Genetic Algorithms: (GA): Biological Terminology, Elements of GA: Encoding, Types ofSelection, Types of Crossover, Mutation, Reinsertion, Theoretical Foundation: Schema, Fundamental Theorems of GA.

***

CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY, BHILAISyllabus for Entrance Examination in Ph.D. Programme 2017Discipline: Electronics and Telecommunication Engineering

Section - IISpecialization

Analog and Integrated Electronics:Carrier transport in silicon: diffusion current, drift current, mobility, and resistivity. Generation and recombination of carriers. p-n

junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED and photo diode, Basics of LASERs. Devicetechnology: integrated circuits fabrication process, oxidation, diffusion, ion implantation, photolithography, n-tub, p-tub and twin-tubCMOS process.

Small Signal Equivalent circuits of diodes, BJTs, MOSFETs and CMOS. Simple diode circuits, clipping, clamping, rectifiers. Biasing andbias stability of transistor and FET. Amplifiers: Low and High frequency single-and multi-stage amplifiers, differential and operational,feedback amplifiers, Sinusoidal oscillators; criterion for oscillation and power amplifiers. Frequency response of amplifiers. SimpleOperational Amplifier (Op-amp) circuits, Function generators and wave shaping circuits, 555 Timers.Communication System:

Random signals and noise: probability, random variables, probability density function, autocorrelation, power spectral density.Analog communication systems: amplitude and angle modulation and demodulation systems, spectral analysis, realizations of analogcommunication systems; signal-to-noise ratio (SNR) calculations for amplitude modulation (AM) and frequency modulation (FM) forlow noise conditions. Basics of information theory and channel capacity theorem. Digital communication systems: pulse codemodulation (PCM), differential pulse code modulation (DPCM), digital modulation schemes: amplitude, phase and frequency shiftkeying schemes (ASK, PSK, FSK), matched filter receivers, bandwidth consideration and probability of error calculations for theseschemes. Fundamentals of TDMA, FDMA and CDMA and GSM.

Microwave Tubes and Amplifiers, Principle of working of Radar and Satellite Communication, Basics of Optical Communications,Computer networking, Network management and Mobile communication.

Digital Circuits, Embedded System and VLSI Design:Boolean algebra, minimization of Boolean functions; logic gates; digital IC families (DTL, TTL, ECL, MOS, CMOS). Combinatorial

circuits: arithmetic circuits, code converters, multiplexers, decoders, PROMs and PLAs. Sequential circuits: latches and flip-flops,counters and shift-registers. Sample and hold circuits, ADCs, DACs. Semiconductor memories. Microprocessor (8085, 8086 &80386) Microcontroller 8051: architecture, programming, memory and I/O interfacing. Real time systems, ARM Processor andcontroller, Real Time & Database Applications, Microcomputer Embedded System Design, Software Development and Tools forEmbedded system, PIC Microcontroller and Interfacing.

Solid State Devices; MOS Circuit design and Layout & Simulation, CMOS Digital Circuit Design, Design of SemiconductorMemories, Mixed Signal and RF Circuit Design, ASIC. Basic MOS Physics and Equivalent Circuits and their Models, VLSI DesignMethodologies, Low Power VLSI Design, MEMS and IC Integration , VLSI Design Rules, Floor Planning, MOS Transistor Principlesand CMOS Inverter, Combinational Logic Circuits, Arithmetic Building Blocks and Memory Architectures, Interconnect and ClockingStrategies, MOSFET Devices, Nano-Scaled Classical MOSFETs, Non-Classical MOSFETs, Compact Models For Circuit Simulators,Hardware Descriptive Language .Signal and Image Processing:

Definitions and properties of Laplace transform, continuous-time and discrete-time Fourier series, continuous-time anddiscrete-time Fourier Transform, DFT and FFT, z-transform. Sampling theorem. Linear Time-Invariant (LTI) Systems: definitions andproperties; causality, stability, impulse response, convolution, poles and zeros, parallel and cascade structure, frequency response,group delay, phase delay. Signal transmission through LTI systems. Analog filter design – IIR filter Design & FIR Filter Design. Multi-rate Signal Processing and its Applications

Digital Image Fundamentals, Image Transforms, Image Enhancement- Spatial and Frequency Domain, Image Restoration, ImageSegmentation, Image Compression, Computer Vision.Microwave Engineering:

Electrostatics; Maxwell’s equations: differential and integral forms, boundary conditions, wave equation, Pointing vector; Planewaves and properties: reflection and refraction, polarization, phase and group velocity, propagation through various media, skindepth; Transmission lines: equations, characteristic impedance, impedance matching, impedance transformation, S-parameters,Smith chart; Waveguides: modes, boundary conditions, cut-off frequencies, dispersion relations. Antenna: types and radiationeffects.

Soft Computing:Artificial Neural Networks (ANN): Artificial Neural Networks, Building Blocks of ANN. ANN Terminologies: Architecture, Setting ofWeights, Activation Functions, Mcculloch- Pitts Neuron Model, Hebbian Learning Rule, Perception Learning Rule, Delta Learning Rule.Fuzzy Systems: Fuzzy System: Fuzzy Sets, Properties and Operations - Fuzzy Relations, Cardinality, Operations and Properties of FuzzyRelations, Fuzzy Composition; Fuzzy Variables, Types of Membership Functions. Genetic Algorithm (GA): Biological Terminology,Elements of GA: Encoding, Types of Selection, Types of Crossover, Mutation, Reinsertion, Theoretical Foundation: Schema,Fundamental Theorems of GA.

***


Syllabus for Entrance Examination in Ph.D. Programme 2017Discipline: Mechanical Engineering


A: DESIGN STREAMADVANCED MECHANICS OF SOLIDS-Introduction to Three Dimensional Theory of Elasticity Plane stress and Plane strain problems,Differential Equations of equilibrium, strain-displacement relations in Cartesian and polar co-ordinates, Boundary conditions, Shearcenter, Torsion.ADVANCED THEORY OF MECHANISMS- Kinematics: Review of determination of velocity and acceleration of points and links inmechanisms- Analytical and graphical methods, Synthesis of Mechanisms, Analysis of Cams: Basic curves, pressure, angle-Cam sizedetermination-Cam profile determination-Analytical and graphical. Static and Dynamic Force Analysis: Forces, Couples. Conditions ofequilibrium- Free body diagram. Analysis of 4-bar linkage, slider crank mechanisms,VIBRATION: Introduction, Fundamentals of system modeling, Free Vibration, Forced Vibration, Transient Vibration, Two Degree ofFreedom Systems, Multi Degree of Freedom System. Dynamic balancing and alignment of machinery: Dynamic Balancing of Rotors,Field Balancing in one Plane, two Planes, and in several Planes.TRIBOLOGY- Friction: Types of friction - dry-boundary and fluid-laws of friction and friction theories Variables in friction, theories ofwear - stages of wear, Lubrication: Role of

lubrication Lubricants, Hydrodynamic bearings, Hydrostatic bearings, rolling element bearings.DESIGN ENGINEERING- Design Fundamentals, , Design considerations – material selection, functional design, cost analysis.Fatigue considerations in design - fatigue in materials – fracture mechanics approach to fatigue – theories of fracture,Introduction to reliability in design – reliability function, failure data analysis, failure distribution functions, MTTF/MTBF, hazardrate and models, methods of improving reliability, reliability testing.OPTIMIZATION TECHNIQUES: Introduction to Optimization, Formulation and Solution methodologies, Single variableoptimization, Multivariable optimization with no constraints, with equality constraints and with inequality constraints. Kuhn-Tucker conditions, Lagrange multiplier method. Introduction to integer programming – Gomory’s cutting plane method, branchand bound method.FINITE ELEMENT METHOD- Basic concepts of FEM – a general procedure for finite element analysis, Truss structures: The directstiffness method, Flexure - elements – elementary beam theory, flexure element, flexure element stiffness matrix and elementload vector, Interpolation function for general element formation, one dimensional elements, triangular elements, rectangularelements, three dimensional elements.

B: THERMAL STREAM

ADVANCED THERMODYNAMICS: Reversible work - availability - irreversibility and second – law efficiency for a closed systemand steady – state control volume. Availability analysis of simple cycles. Thermodynamic potentials. Different equations of state– fugacity – compressibility - principle of corresponding States - fugacity coefficient, Thermochemistry - First law analysis ofreacting systems - Adiabatic flame temperature – entropy change of reacting systems.ADVANCED ENGINEERING FLUID MECHANICS: Three dimensional continuity equation - differential and integral forms –equations of motion momentum and energy and their engineering applications.Rotational and irrorational flows, Laminar andturbulent Flow, Boundary Layer.

ADVANCED HEAT TRANSFER : One dimensional energy equations and boundary condition - three-dimensional heat conductionequations . radiation in gases and vapour, Momentum and energy equations - turbulent boundary layer heat transfer, heat exchanger, NTU approachREFRIGERATION & AIR CONDITIONING SYSTEM DESIGN:Estimation of Solar Radiation : Introduction to cooling and heating load calculations, Solar radiation, Solar geometry ,Selection of AirConditioning Systems: Introduction to thermal distribution systems and their functions, Selection criteria for air conditioningsystems, Classification of air conditioning systems.Design of Air Conditioning ducts.COMPUTATIONAL FLUID DYNAMICS HEAT TRANSFER: Conservation equation mass momentum and energy equations convectiveforms of the equations and general description. Numerical grid generation basic ideas transformation and mapping. Solution of finitedifference equations iterative methods matrix inversion methods ADI method operator splitting fast Fourier transform applications.

C: PRODUCTION STREAM

THEORY OF METAL CUTTING: Mechanics of Metal Cutting, Tool Life and Tool Wear, Single Point Cutting Tool, Multipoint Cutting Tool,Grinding, Cutting Temperature, Cutting tool materials Cutting fluids.ADVANCED MANUFACTURING PROCESSES: Non-Traditional Machining.ADVANCED METAL FORMING: Fundamentals of Metal Forming, Rolling of metals, theories of cold and hot rolling, defects in rolling,Forging, forging defects, Extrusion Analysis of Extrusion process, defects in extrusion, Drawing, Sheet Metal forming.ADVANCED CASTING AND WELDING TECHNOLOGIES: Laser Beam Welding, Friction Stir Welding, Electron Beam Welding, UltrasonicWelding, Investment casting, shell moulding, squeeze casting, vacuum casting, counter-gravity flow-pressure casting, directional andmonocrystal solidification, squeeze casting, semisolid metal casting, rheocasting.ADVANCED CAD: Introduction To Cad,Geometric, Modelling:Synthetic Curves, Surface Modeling, Synthetic Surface, AdvancedSurfaces, Transformations, 3-D Modelling, Design Applications.

COMPUTER AIDED MANUFACTURING: Compute-Aided Programming, Automatic Tool Path generation, Tooling for CNC Machines-Interchangeable tooling system, Adaptive control of machining processes like turning, grinding.

QUALITY ENGINEERING IN MANUFACTURING: Quality Value and Engineering, Tolerance Design and Tolerancing, Analysis of Variance (ANOVA), Orthogonal Arrays, ISO-9000 Quality System.

OPERATION RESEARCH: Linear programming, simplex method, transportation and assignment models PERT and CPM.FINITE ELEMENT TECHNIQUES: Introduction to Finite Element Method ,Stress and Equilibrium. Boundary conditions. Strain-Displacement relations. Stress-strain relations.

***


Syllabus for Entrance Examination in Ph.D. Programme 2015 Discipline: Chemical Engg.


A) Process Calculations and Thermodynamics: Laws of conservation of mass and energy; use of tie components; recycle, bypass andpurge calculations; degree of freedom analysis. First and Second laws of thermodynamics. First law application to close and opensystems. Second law and Entropy Thermodynamic properties of pure substances: equation of state and departure function,properties of mixtures: partial molar properties, fugacity, excess properties and activity coefficients; phase equilibria: predicting VLEof systems; chemical reaction equilibria.B) Fluid Mechanics and Mechanical Operations: Fluid statics, Newtonian and nonNewtonian fluids, Bernoulli equation, Macroscopicfriction factors, energy balance, dimensional analysis, shell balances, flow through pipeline systems, flow meters, pumps andcompressors, packed and fluidized beds, elementary boundary layer theory, size reduction and size separation; free and hinderedsettling; centrifuge and cyclones; thickening and classification, filtration, mixing and agitation; conveying of solids.C) Heat and Mass Transfer: Conduction, convection and radiation, heat transfer coefficients, steady and unsteady heat conduction,boiling, condensation and evaporation; types of heat exchangers and evaporators and their design. Fick’s laws, molecular diffusion influids, mass transfer coefficients, film, penetration and surface renewal theories; momentum, heat and mass transfer analogies;stage wise and continuous contacting and stage efficiencies; HTU & NTU concepts design and operation of equipment for distillation,absorption, leaching, liquid-liquid extraction, drying, humidification, dehumidification and adsorption.D) Chemical Reaction Engineering: Theories of reaction rates; kinetics of homogeneous reactions, interpretation of kinetic data,single and multiple reactions in ideal reactors, non-ideal reactors; residence time distribution, single parameter model; non-isothermal reactors; kinetics of heterogeneous catalytic reactions; diffusion effects in catalysis.

E) Instrumentation and Process Control: Measurement of process variables; sensors, transducers and their dynamics, transferfunctions and dynamic responses of simple systems, process reaction curve, controller modes (P, PI, and PID); control valves; analysisof closed loop systems including stability, frequency response and controller tuning, cascade, feed forward control.

F) Plant Design and Economics: Process design and sizing of chemical engineering equipment such as compressors, heat exchangers,multistage contactors; principles of process economics and cost estimation including total annualized cost, cost indexes, rate ofreturn, payback period, discounted cash flow, optimization in design.G) Chemical Technology: Inorganic chemical industries; sulfuric acid, NaOH, fertilizers (Ammonia, Urea, SSP and TSP); naturalproducts industries (Pulp and Paper, Sugar, Oil, and Fats); petroleum refining and petrochemicals; polymerization industries;polyethylene, polypropylene, PVC and polyester synthetic fibers.H) Statistics & Research Aptitude Mean, median, mode, basic concepts of probability, coefficient of variance, standard error,standard deviation, and correlation and regression analysis. Student t-test, F-test, analysis of variance (ANOVA), data graphics anddata interpretation. Principles and various models of statistical optimization techniques, optimization software’s. National andinternational scenario of scientific research, literature reviewing, reference citation, scientific and research journals, impactvaluation, research article and patent drafting, various scientific websites, abstracts.

***


Syllabus for Entrance Examination in Ph.D. Programme 2015Discipline: Management

Section - II

Specialization A: Behavioural Science•Understanding Organizational Behaviour - Fundamental Concepts, Organizational processes, Organizational structure,Organizational Change and Innovation processes. Effectiveness in organizations - Models of Organizational Behaviour, Systemstheory and time dimension of effectiveness, Developing competencies, Limitations of Organizational Behaviour, Continuingchallenges.•Individual differences and work behaviour - Why individual differences are important, The basis for understanding Work Behaviour,Individual differences influencing Work Behaviour. Personality - Sources of personality differences, Personality structure, Personalityand Behaviour, Measuring Personality Attitudes - The nature of Employee Attitudes, Effects of Employee Attitudes, Studying Jobsatisfaction, Changing Employee Attitudes. Perceptions, Attributions and Emotions - The perceptual process ,Perceptual grouping,Impression management, Emotions, Emotional Intelligence•Job Design, Work and Motivation - Job design and quality of work life, A conceptual model of job design, Job performanceoutcomes. Evaluation, Feedback and Rewards - Evaluation of Performance, Performance Evaluation feedback, Reinforcement theoryA model of Individual rewards, Rewards Affect Organizational concerns, Innovative reward system. Managing misbehaviour - Theemergence in Management of the study of misbehaviour, Selected misbehaviours. Stress and Counselling - What is stress?, Stressmodel, Work stressors, Stress outcomes, Stress moderators, Stress prevention and management, Employee counselling, Types ofcounsellingInformal and Formal Groups - Group Dynamics, The nature of informal, Organizations, Formal groups. Teams and Team Building -Organizational context for teams, Teamwork, Team building. Managing Conflict and Negotiation - Conflict in Organizations, Acontemporary perspective on intergroup conflict, What causes

entergroup conflict, Power and Politics - The concept of power, Sources of power, Interdepartmental power, Illusion of power,Political strategies and tactics, Ethics, power and politics, Using power to manage effectively. Empowerment and Participation - Thenature of empowerment and participation,•Communication - Communicating within organizations, Information richness, Decision Making - Types of decisions, A RationalDecision-making Process, Behavioural influences on decision making, Group decision making, Creativity on group decision making.Leadership - What is leadership, Trait approaches, Behavioural approaches, Situational approaches, Other perspectives, concepts andissues of leadership.•Organizational Structure and Design - Designing an organizational structure, Division of labour, Delegation of authority,Departmental biases, Span of control.Managing Change and Innovation - Change at work, Resistance to change, Alternative changemanagement approaches, Learning principles in change management, Organizational behaviour across cultures - Conditionsaffecting multinational operations, Managing International Workforce.B: EntrepreneurshipThe Entrepreneurial Development Perspective: Concept of Entrepreneurship and Development, Conceptual models ofentrepreneurship.Role of Entrepreneur in Indian economy and developing economies.Tiny & SME & Its Contribution in the NationalEconomy; Corporate EntrepreneurshipEntrepreneurial team – matching human resources needs and skills. Identifying business opportunities and planning for businessservice & production. Business promotion – process – stages – facilities and incentives. Creating Entrepreneurial Venture, BusinessPlanning Process, Environmental Analysis – Search and Scanning; Identifying; Stages in starting the new venture. ProjectManagement a) Meaning, Objectives and How to choose a project b) Technical, Financial, Marketing, Personnel Feasibility c)Estimating and Financing Funds requirement. Schemes offered by various commercial banks and financial institutions.Role of Central Govt. and State Govt. in Promoting Entrepreneurship; Introduction to various incentives, subsidies and grants,Promotion of Export oriented units; Fiscal and Tax concessions Role of Govt.Problems of Entrepreneurs- Marketing, Finance, Human Resource, Production, Research and External Problems, beginning andgrowth as a entrepreneur.C: FINANCE MANAGEMENTManagement Accounting: Nature and scope of costing; Cost concepts and Classifications; Usefulness of Costing to Managers,Marginal costing: Break—even

analysis, decision involving alternative choices. Budgeting: Types of budgets and their preparation, Performance budgeting and Zero-base budgeting. Ratio analysis: Liquidity, profitability and solvency.•Financial management: Objectives of financial management; Time value of money, sources of finance, Investment decisions:Importance, Difficulties determining cash flows, methods of capital budgeting Risk analysis : Cost of capital; Concept andimportance, Computations of cost of various sources of finance; Weighted Average Cost of Capital; Capital Structure decisions;Theories of capital structure, Factors determining capital structure.•Stock Market: Introduction to Indian Stock Market, scope and features of an investment program, investment risk, interest risk,market risk, inflation risk, default risk, systematic and unsystematic risk, problems related to risk and return. Corporate RiskManagement: Introduction and overview.•Corporate Finance: Basic Concepts; Valuation Methods; Value Creation and New Valuation Tools; Alternative Valuation Approachesto Specific Cases. Optimum capital structure; Management of working capital - Cash, Receivables and Inventory Management,Internal Financing and Dividend Policy; Financial Modeling.•Taxation: introduction, basic concepts and theories, direct taxation and Indirect taxation, tax management.•Banking and Insurance: concepts of banking institutions and insurance policies and products in the market. Overview of Indianfinancial systems and insurance markets, basic issues in banking, regulations in banking and insurance.•Foreign exchange market: introduction and overview of Structure, types of transactions, International monetary system:Introduction, exchange rate regimes,•Derivatives its introduction & meaning, Characteristics, Types, Derivative Market in India, Functions of Derivative Market,Significance of Derivatives, Traders in Derivatives Market.D: Human Resource ManagementHuman Resource Management – Significance; Objectives, Function; A Diagnostic Model; External And Internal Environment. ForcesAnd Influences; Organizing HRM FunctionRecruitment And Selection- Sources Of Recruits; Recruiting Methods; Selection Procedure; Selection Tests; Placement And Follow Up.

Performance Appraisal System- Importance And Objectives; Techniques Of Appraisal System; New Trends In Appraisal System.Evaluation Of Performance For Development-Competency Mapping;Development Of Personnel- Objectives; Determining Needs; Methods Of Training And Development Programmes; Evaluation.Human Resource Development- HRD Structure; Functions; Systematic approach to Needs Assessment; Training Program Design;Evaluating HRD Programs; Evaluation Process; Training Outcomes; Potential Legal Issues Related To Training; Cross-Cultural Training;The Future Of Training And DevelopmentCareer Planning And Development – Concept Of Career; Career Planning And Development Methods.Compensation And Benefits- Job Evaluation Techniques; Wage And Salary Administration; Fringe Benefits; Human Resource RecordsAnd Hr Audit.Employee Discipline- Importance; Causes And Forms ; Disciplinary Action; Domestic Enquiry.Grievance Management- Importance; Process And Practices; Employee Welfare And Social Security Measures.Labour and Social Security Laws- The Employees Provident Fund & Miscellaneous Provisions Act, 1952; Employees State InsuranceAct, 1948; Factories Act, 1948; Payment Of Gratuity Act, 1972; Employee’s Compensation Act, 1923; Maternity Benefit.Industrial Relations- Importance; Industrial Conflicts; Causes; Dispute Settlement Machinery. Trade Unions – Importance OfUnionism; Union Leadership; National Trade Union Movement. Collective Bargaining – Concept; Process; Pre Requisites; New TrendsIn Collective Bargaining.Industrial Democracy And Employee Participation – Need For Industrial Democracy; Prerequisites For Industrial Democracy;Employee Participation – Objectives; Forms Of Employee Participation.Future Of HRM – Six Sigma Practices; Flexible Work Options, Virtual Organization.

***

E: Marketing Management

•Marketing: Introduction & overview; Marketing philosophies; Marketing management process; Concept of marketing mix.

•Consumer Behavior :Introduction & overview; factors influencing consumer-buying behavior; consumer-buying process; Theconsumer research paradigms and process; Consumerism•Marketing Research :Introduction & overview; Marketing research Process; Applications of Marketing Research.•Distribution & Inventory Management : Introduction & overview; Marketing Channels: Defining and importance; Functions ofmarketing channels.•Industrial Marketing : Introduction; Overview & Functional Applications.•Services Marketing :Introduction & Overview; Growth of service sector economy; Classification of service marketing mix; ServiceQuality Gap Model; Event Management; Hospitality & Hotel Management.•Advertising and Sales Promotion : Integrated marketing communications concepts ; Basics of Advertising; Creativity strategy; SalesPromotion.•Sales Management :Introduction & overview; Selling Skills; Selling process; Sales Force management.•Customer Relationship Management : Introduction & overview; Types of CRM; CRM Strategies & Models.•Retail Marketing :Basics; Retail Format & Types; Supply Chain Management; Software for Merchandise.•Rural & Agro Marketing :Rural Market; Rural Marketing Index; Agri Business & Marketing; Government support to Agri Business.•International Business Marketing : Theories of international trade; Role of multinationals, Trade Policies, Balance of Payment, TradeDeficits, Regulatory framework, tariffs & quotas•Social Marketing : Introduction & overview; Working on Non-Profit organization; NGOs.•Social Media & Internet Marketing : Internet Age of marketing; Data Mining in Marketing; Social Media Marketing; Onlinemarketing.•Travel & Tourism Marketing : Changing facets of Tourism; Tourism Development; Travel Agency and Tour Operator•Product& Brand Management : Product Management; Product Strategy; PLC; Branding; Brand Equity.•Corporate Communications : Media Relations; Management and Surveillance; Web based Communications.•Direct & Network Marketing: Introduction; Overview; Functional Applications.•Green Marketing: Introduction; Overview; Functional Application.

F: Operation and Production Management

Deterministic Model in Operation research-Linear Programming (Graphical Method, Simplex method, Duality Theory, SensitivityAnalysis),Network Flow (CPM),Transportation Model, Assignment Model

Probabilistic Models in Operation Research-Probability Theory, Decision Theory, Network Flow (PERT),Queuing Model, SimulationTechniques

Game Theory, Integer Programming, Dynamic Programming, Non linear Programming

Role and Scope of Production Management; Facility Location; Layout Planning and Analysis; Production Planning and Control –Production Process Analysis; Demand Forecasting for Operations; Determinants of Product mix; Production Scheduling; Workmeasurement; Time and Motion Study; Statistical Quality Control.

***


Discipline: Applied Chemistry

Section -II

Specialization A: Reaction dynamics and surface chemistry

Reaction Kinetics: Introduction, Rates of chemical reactions, Methods of determining rate laws, Mechanisms of chemical reactionsand steady state approximation, Laws of photochemistry, Kinetics of photochemical and composite reactions, Chain and oscillatoryreactions, Collision and transition state theories, Stearic factor, Treatment of unimolecular reactions, Ionic reactions: salt effect.Homogeneous catalysis and heterogeneous catalysis, free radical polymerization, enzyme catalysis, and reaction dynamics. Effect ofpressure on reaction rate, Kinetics of catalytic reactions, Kinetics of surface reaction, autocatalysis, unimolecular and bimolecularsurface reaction.Fast Reaction: Luminescence and Energy transfer processes, Study of kinetics by stopped-flow technique, Relaxation method.Adsorption: Surface tension, Capillary action, Gibbs adsorption isotherm, Estimation of surface area (BET equation), Surface films onliquids (Electro-kinetic phenomenon), Catalytic activity at surfaces.Properties and stability of colloids, Surface active agents, Reverse micelles, Critical micellar concentration (CMC), Factors affectingthe CMC of surfactants, Thermodynamics of micellization, Micro emulsion.Course Outcome: The students will acquire knowledge of•Mechanism for chemical reactions for optimizing the experimental conditions.•Application of homogeneous and heterogeneous catalysis in chemical synthesis•Importance of adsorption process and catalytic activity at the solid surfaces•Concept of colloidal material and their stability for many practical uses.

Recommended Books

•Atkins, P.W., Physical Chemistry, W.H. Freeman (1990).

•Laidler, K.J., Chemical Kinetics, Dorling Kingsley (1998).

•Rajaraman, J., and Kuriacose, J., Kinetics and Mechanism of Chemical Transformations, McMillan (2008).

•Moroi, V., Micelles Theoretical and Applied Aspects, Springer (1986).

•Gowarikar, V.A., Vishwanathan, N.V., and Sreedhar, J., Polymer Science, New Age International (1986).

B: Organic Chemistry

IUPAC Nomenclature of Simple Organic and Inorganic Compounds.

Concept of Chirality : Recognition of symmetry elements and chiral structures, R-S nomenclature, diastereoisomerism in acyclic and

cyclic-systems, E-Z isomerism. Conformational analysis of simple cyclic (chair and boat cyclohexanes) and acyclic systems,

Interconverison of Fischer, Newman and Sawhorse projections.

Stereochemistry and Conformational Analysis: Newer methods of assymetric synthesis (including enzymatic and catalytic nexus),

enantio-and diastereo selective synthesis. Effects of conformation on reactivity in acyclic compounds and cyclohexanes.

Aromaticity: Huckel's rule and concept of aromaticity : annulenes and

heteroannulenes,fullerenes. (C60)

Organic reaction mechanisms: Generation, stability and reactivity of carbocations, carbanions, free radicals, carbenes, benzynes and

nitrenes. Addition, elimination E1, E2 and substitution reactions with electrophilic, nucleophilic or radical species. Determination of

reaction pathways.

Named reactions and rearrangements: Aldol, Perkin, Stobbe, Dieckmann condensations, Hofmann, Schmidt, Lossen, Curtius,

Backmann and Fries rearrangements; Reimer – Tiemann, Reformatsky and Grignard reactions. Diels-Alder reactions; Claisen

rearrangements; Friedel– Crafts reactions and Witting

reactions. Routine functional group transformations and inter-conversions of simple functionalities. Hydroboration, Oppenaur

oxidations; Clemmensen, Wolf-Kishner, Meerwein – Ponndrof – Verley and Birch reductions.

Organic transformations and reagents: Use of the following reagents in organic synthesis and functional group transformations;

Complex metal hybrids, Gilman’s reagent, Lithium dimethylcuprate, Lithium di-iso propylamide (LDA) dicyclohexylcarbodimide. 1,3

– Dithiane (reactivity umpolung), trimethylsilyl iodide, tri-n-butyl tin hybride, Woodward and provost

hydroxylation, osmium tetroxide, DDQ, selenium dioxide, phase transfer catalysts, crown ethers and Merrified resin, Peterson’ssynthesis, Wilkinson’s catalyst, Baker’s yeast.Pericyclic Reactions: Selection rules and stereochemistry of electrocyclic reactions, cycloaddition and sigmatrophic shifts, Sommelet-Hauser, Cope and Claisen rearrangements.Photochemistry: Principles of energy transfer, cis-trans isomerization, Paterno-Buchi reaction, Norrish Type I and II reactions, Photoreduction of ketones, di-pi-methane rearrangement, photochemistry of arenes.Heterocycles: Synthesis and reactivity of furan, thiophene, pyrrole, pyridine,quinoline,isoquinoline and indole. Skraup synthesis, Fischer indole synthesis.Chemistry of natural products: Familiarity with methods of structure elucidation and biosynthesis of Carbohydrates, proteins andpeptides, fatty acids, nucleic acids, terpenoids, steroids, alkaloids, cholesterol and hormones. Function and application of enzymesand coenzymes.Spectroscopy: Combined applications of mass, UV-VIS, IR and NMR spectroscopy for structural elucidation of compounds.References1. R.T. Morrison and R. N. Boyd's, Organic Chemistry, 6thed., Spring 2008.2. I.L. Finar, Organic Chemistry Vol. I & II, 5th ed, Pearson Education, Singapore, 2004.3. Micheal B.Smith and Jerry March, March’s Advanced Organic Chemistry Reactions, Mechanishms and Structure, 6thed.,JohnWiley&Sons Inc., New Jersey, 2007.4. Peter Skyes, A Guide book to Mechnism in Organic Chemistry, Orient Longman Private Limited., New Delhi, 20035. J.M.Coxon and B. Halton, Organic Photochemistry, 2nd edition, Cambridge University Press, 2011.6. Jagdamba Singh, Photochemistry and Pericyclic Reactions, 3rd edition, New Age Science, 2009.C: Environmental ChemistryUnit-1Ecosystem : Structure and function of ecosystem , Food chain, Food web, Energy flow, biogeochemical cycle, Biomagnification.Unit-2Air : Natural and anthropogenic sources of pollution. Primary and Secondary pollutants, Transport and diffusion of pollutants,

Methods of monitoring of air pollution SO2 , NOx , CO, SPM Effects of pollutants on human beings, plants, animals, materials and on

climate, Air Quality Standards.

Unit-3

Water : Sources, types and consequences of water pollution (ground water and surface water). Sampling and physico-chemical

analysis of water quality. Dissolved Oxygen, Chemical Oxygen Demand, Biological Oxygen Demand, Heavy metal pollution,

surfactant and their toxicity, Water Quality Standards.

Unit-4

Soil : Soil and soil profile, Trace metals and organic matter in soil, Physico-chemical analysis of soil Industrial waste effluents and

heavy metals their interactions with soil components. Different kinds of synthetic fertilizers (N,P & K) and pesticides and their

interactions with different components of soil.

Unit-5

Solid Waste: Sources and generation of solid wastes, their characterization, chemical composition and classification of municipal and

hazardous wastes, Different methods of disposal and management of solid wastes – sanitary landfill, incineration, composting,

pyrolysis

Suggested Books –•Standards methods for the Examination of Water and Wastewater, APHA / AWWA / WPCF Publishing, 19th Ed. 1995.

•Quantitative organic analysis : Qualitative inorganic analysis : Qualitative organic analysis, series By – Vogel’s.

•Analysis of Chemicals by Vogel P.K.Goel , Water Pollution Causes Effects and Control. New Age International,2009.

•M. Petrovic and D. Barcelo, The handbook of Environmental Chemistry.

•Meyers A. Robert (Eds.) Encyclopedia of Environmental Analysis and Remediation Vol. 1-8, John Wiley & Sons, 1998

***


Syllabus for Entrance Examination in Ph.D. Programme 2017Discipline: Applied Mathematics

Section - II

Specialization A: Celesial Mechanics•Lagrange and Hamilton Equations: Introduction; Classification of a Dynamical System; Lagrange’s Equations for Simple Systems; Principle of Virtual Work- D’ Alembert’s Principle; Lagrange Equations for General Systems; Hamilton’s equations;IgnorableCoordinates; The Routhian Function. •Hamiltonian Methods: Introduction; Hailton’s Principle—Hamilton’s Principle for Conservative System, Principle of Least action; Characteristic function of Hamilton-Jacobi Equation; Phase Space and Liouville’s Theorem; Special Transformations—Lagrange and Poisson Brackets; Calculus of Variations.B: Fuzzy Logic / Game Theory/Algebra•Sets and mappings

1.Sets2.Relations3.Mappings4.Binary Operations5.Cardinality of sets

•Matrices 1.Matrices2.Operations on matrices3.Determinant function4.Properties of Determinant function

•Groups1.Semi groups and groups2.Homomorphism

1.Subgroups and cosets2.Generators and relations3.Normal subgroup4.Direct products5.Sylow’s Theorem

•Rings1.Definitions and elementary properties2.Subrings and characteristics of a ring3.Ideals and Homomorphism4.Sub modules5.Polynomial ring

•Modules and vector spaces1.Definitions and examples2.Sub modules and direct sums3.Free modules4.Representation of linear mapping

•Fuzzy Sets1.Definition and examples2.Operations on Fuzzy Sets3.Zero person game4.Two person game5.n-person game

References:•Bhattacharya P.B., Jain S.K. :Basic abstract algebra, Cambridge University Press•Lotfi A. Zadeh : Fuzzy Sets information and control, 1965•Von Neumann, J: Theory of games and economic behavior, Princeton University Press, 1947

C: FIXED POINT THEORY AND APPLICATIONTopological Spaces: open sets, closed sets, neighbourhoods, bases, subbases, limit points, closures, interiors, continuousfunctions, homeomorphisms.

Quotient Topology: Construction of cylinder, cone.

Connectedness and Compactness: Connected spaces, Connected subspaces of the real line, Components and local connectedness,Compact spaces, Heine-Borel Theorem, Local -compactness.

Separation Axioms: Hausdorff spaces, Regularity, Complete Regularity, Normality, Urysohn Lemma, Tychonoff embedding andUrysohn Metrization Theorem, Tietze Extension Theorem.

Complete metric spaces: Function spaces, Characterization of compact metric spaces, equicontinuity.Normed spaces: Continuity of linear maps. Hahn-Banach Extension and Separation Theorems. Banach spaces. Dual spaces andtransposes. Uniform Boundedness Principle and its applications. Closed Graph Theorem, Open Mapping Theorem and theirapplications.

Inner product spaces: Hilbert spaces. Orthonormal basis. Projection theorem and Riesz Representation Theorem.Fixed Point Theorems with Applications: Banach contraction mapping theorem, Brouwer fixed point theorem, Leray-Schauder fixedpoint theorem. Calculus in Banach spaces, Gateaux as well as Frechet derivatives, chain rule, Taylor's expansions, Implicit functiontheorem with applications, subdifferential.Fuzzy Logic: Crisp set and Fuzzy set, Basic concepts of fuzzy sets, membership functions. Basic operations on fuzzy sets, Properties

of fuzzy sets, Fuzzy relations. Propositional logic and Predicate logic, fuzzy If – Then rules, fuzzy mapping rules and fuzzy implication

functions, Applications.

***


Discipline: Applied Physics

Section - II

Specialization A: Biomedical Physics

• Concept of Quantum theory, Wave particle duality, Photoelectric effect, de BroglieWave ,Compton effect , Compton scattering.X-rays ,Properties of X-Rays, PracticalApplication of X-Rays. Types of indirectly ionizing photon radiation

• Important derived physical constants and relationships, Speed of light in a vacuum:Reduced Planck’s constant × speed of light in a vacuum: Fine structure constant:Bohr radius: Rydberg energy: Rydberg constant: Classical electron radius: Compton wavelength of the electron: Classification ofradiation: Non-ionizing radiation (cannot ionize matter). Ionizing radiation (can ionize matter either directly or indirectly):

• Photon fluence and energy fluence, KERMA, Absorbed dose, Stopping powers, radiation dosimeter, Ionization chambers, TLDs,• X ray machines for radiotherapy,Gamma ray beams and Gamma ray units• Radioactivity: Modes of radioactive decay, Radiosurgical techniques, Gamma Knife,

Linac based radiosurgeryReference Books : 1 ATTIX, F.H., Introduction to Radiological Physics and Radiation Dosimetry, Wiley.2. KHAN, F.M., The Physics of Radiation Therapy, Lippincott, Williams and Wilkins3. HORTON, J., Handbook of Radiation Therapy Physics, Prentice Hall, New York .B: Nano Science & Applications

Unit no. 1: Nanotechnology1.Introduction 1.2 Emergence of nanotechnology 1.3 Bottom up and Top

down approaches 1.4 Zero dimensional nanostructures: nanoparticles

Unit no. 2: Nanowires and nanorods2.1 Introduction to one –dimensional Nanostructures 2.2 Evaporation – condensation growth 2.3 Dissolution – condensation growth2.4 Vapor (or solution )- liquid-solid (VLS or SLS) growth 2.5 Templet based synthesisUnit no. 3: Thin films3.1 Introductoin to Two – Dimensional Nanostructures 3.2 Fundamentals of film growth 3.3 Physical Vapor Deposition (PVD) 3.4Chemical Vapor deposition (CVD) 3.5 Atomatic Layer deposition (ALD) 3.6 Electrochemical deposition 3.7 Sol- Gel filmsUnit no. 4: Characterzation and Properties of Nanomaterials4.1 Structural characterization (XRD, SEM, TEM) 4.2 Chemical Characterization (Optical spectroscopy , Electron spectroscopy) 4.3Physical properties of nanomaterials 4.4 Electrical conductivityUnit no. 5: Application of nanomaterials5.1 Molecular Electronics and nanoelectronics 5.2 Nanobots 5.3 Biological applications of nanoparticles 5.4 Bandgap engineeredquantum device5.5 NanomechanicsReference BookNanostructures and nanomaterials: Synthesis, properties and application : Cuozhong CaoThin Film Fundamentals : A. GoswamiNanophysics and Nanotechnology: An introduction to modern concept in nanoscience: Edward L. WolfC: Luminescence & ApplicationsTypes of luminescence. Luminescent Materials. Resonance, spontaneous, and stimulated luminescence. Three- and four-levelluminescence. Chemiluminescence, electroluminescence (cathodoluminescence), mechanoluminescence, photoluminescence(fluorescence, phosphorescence), radioluminescence, sonoluminescence, thermoluminescence. X-ray fluorescence analysis,fluorescence yields for K and L shells.Thermo luminescence - models: Jablonski model, Configuration-coordination model, energy band model, thermoluminescencemechanisms, Method of analysis; methods using different rates, half width method, initial rise method, Applications ofthermoluminescence in radiation dosimetry and datingMechanoluminescence: Mechanoluminescent materials, Characteristics, mechanisms, theories of Mechanoluminescence,applications. Lyoluminescence, LL reader, Inorganic lyoluminescence phosphors, mechanisms, enhancements and spectra

D: Solid State Ionics & Material Science

•Experimental Material Science : Material Preparation and characterization studies and solid-state electrochemical device applications viz. solid state batteries.supercapacitor, light emitting elechrochemical cell of ionic composites, nano-composites, ionic polymers and polymer nano-composite electrolyte materials.

•Theoretical Material/Nano-material Science : •Mathematical -Modeling: Mathematical modeling and evaluation of transport properties of some ionic/superionic solids by usingspace charge depolarization method. Modeling of electrochemical devices viz. solid state batteries, super capacitors and sensors arealso in progress.•DFT based first principle studies : Molecular structure, electronic/electrical, mechanical, optical and transport properties usingdensity functional based approach of nano-matrials, biomaterials, ionic/super-ionic solids and electronic/ionic conducting polymersimplemented in SIESTA / transiesta software.

•Molecular mechanics and Molecular dynamic simulation of polymer nano-composite materials for solid state battery, supercapacitor, organic light emitting diode(OLED), light emitting electrochemical cell (LEEC) applications.

***


Ph.D. Programme fee for the University

Sl. No Particulars Amount Remarks

1 Ph.D. Entrance exam. fee Rs. 1000.00

2 Ph.D. Enrollment fee Rs. 1000.00 up to specified date

3 Late fee for enrollment Rs. 50.00

4 Immigration fee Rs. 500.00

5 Course work exam fee Rs. 525.00

6 Ph.D. Registration fee Rs. 10000.00

7 Ph.D. Six monthly progress report fee Rs. 2000.00 for each report

8 Ph.D. thesis submission fee Rs. 20000.00

Note:- Fees may vary if necessary.

CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY,BHILAI

Annexure-1

Letter No.2439/CSVTU/Ph.D./2016 Bhilai , Date: 19.09.2016

Ph.D. Programme fee structure (for Research Centre)Admission and Fee Regulatory Committee, Technical Education Directorate Campus, Raipur has fixed the Ph.D. Programme fee videtheir letter No. PA/AFRC/2012/6727, Raipur Dated 1.2.2012 as mentioned below:For Engineering discipline, various subject thereof and Computer Application.

For first semesterRs 23000 /- (Tution fees, Library fees, Laboratory fees and other misc. fees)Rs 2300 /- (Growth and Development charges)Rs 1500 /- (Caution money)Total Rs. 26800 /- (Rs. Twenty six thousand eight hundred )

For subsequent each semesterRs. 13500 /- (Tution fees, Library fees, Laboratory fees and other misc. fees )Rs 1350 /- (Growth and Development changes)

Total Rs.14850 /- (Rs. Fourteen thousand eight hundred fifty )• For PharmacyFor first SemesterRs. 23000 /- (Tution fees, Library fees, Laboratory fees and other misc. fees) ,Rs. 2300 /- (Growth and Development charges)Rs. 1500 /- (Caution money)Total Rs. 26800 /- (Rs. Twenty six thousand eight hundred )

For subsequent each semesterRs. 13500 /- (Tution fees, Library fees, Laboratory fees and other misc. fees )Rs. 1350 /- (Growth and Development changes)

Total Rs.14850 /- (Rs. Fourteen thousand eight hundred fifty ) Cont…..

• For Management For first Semester Rs.18000/- Tution fees, Library fees, Laboratory fee, and all other fees including misc. fees)Rs. 1800/- (Growth and Development changes)Rs 1500/- (Caution money)Total Rs. 21300 /- (Rs. Twenty one thousand three hundred )

For subsequent each semester Rs. 12000 /- (Tution fees, Library fees, Laboratory fees and all other fees including misc. fees)Rs. 1200 /- (Growth and Development changes)

Total Rs. 13200 /- (Rs. Thirteen thousand two hundred) All approved Research Centres are hereby instructed to collect the fee from the Research Scholar strictly according to the above.

RegistrarCSVTU, Bhilai (C.G.)

Note:- Fees may vary if necessary.

CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNVERSITY, BHILAIScheme of Examination & Syllabus for Pre Ph.D. Course Work

Recommended by Academic Council in its Meeting held on 02-12-2009

S.No. Subject Scheme of

Teaching

Scheme of

Examination

Total

Marks

Credit

L T P TA ESE

1. Research Methodologies & Computer Application

(Common to all disciplines)

3 3 2 50 100 150 6

2. Term Paper I (Subject Specific) 4 6 - 100 - 100 7

Term Paper II (Subject Specific) 100 100

3. Literature Survey - - 6 150 150 3

Grand Total 7 9 8 400 100 500 16

L-Lecture, T-Tutorial, P-Practical, ESE- End Semester Examination, TA- Teacher’s AssessmentNote:For successful completion of the course work, the candidates has to secure minimum 50% of the total

marks in aggregate with at least 40% marks in ESE of the subject at Sr. no. 1 which is common to all

disciplines.

Detail Syllabus for Pre Ph.D. Course Work

Subject: Research Methodologies & Computer Application Branch: Common to all disciplines

Total Theory Period: 40 Total Tutorial Periods: 10

Total Marks in End Semester Examination: 100 Total Marks in Teacher’s Assessment: 50

Duration of End Semester Examination: Three Hours

Section-A (Marks Allotted: 60)

Introduction: Concept, Meaning of Research, Objectives of Research, research approaches, Types of Research, significance:research methods/methodology, research & scientific methods- Inductive and deductive, Characteristics of Good Research.

Research Process: Research Plan, Steps, Research problem Identification, definition, Formulation, Research Objectives.

Research Designs: Concepts, features, Types- Exploratory, Descriptive and Casual Research Designs and its methods,research Budget.

Data for Research: Collection and Preparation: Primary and Secondary; Sources of data; methods for data collection, DataTabulation, Editing and Coding; Survey and Observation methods; Motivation Research and Projective Techniques. Types ofData, Questionnaire Design; Techniques and Precautions; Summarizing the Data; Mean, Median, Mode and StandardDeviation- numerical for practice.

CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNVERSITY, BHILAI

Sampling Fundamentals: Sampling Plan, Design: Sampling methods- Probability sampling methods-simple randomsampling with replacement, simple random sampling without replacement, stratified sampling, cluster sampling,Non-probability sampling method-convenience sampling, judgment sampling, quota sampling. Sample SizeDetermination, Reliability and Validity.

Measurement and Scaling Techniques: Rating Scale and ranking Scales.

Concept of Hypotheses: Formulation of Hypotheses, Testing of Hypotheses, Parametric and non-parametric tests.Testing of Significance mean, proportion, variance and correlation- coefficients. ( Numerical pertaining toapplicability for practice: Chi Square, t-test, z-test ANOVA).

Data Processing and Analysis Techniques: Univariate and bivariate Analysis (Chi Square, t-test, z-test ANOVA,numerical for practice).

Multivariate Analysis: Introduction to Discriminant Analysis, Cluster Analysis, Factor Analysis, Multiple LinearRegressions.

Importance of statistics in research, descriptive vs inferential.

Interpretation and Report Writing: Data Interpretation, Techniques of Interpretation, Steps in Writing Report,Generic layout of a Research Report.

Application of Research in engineering, sciences, social sciences, humanities, Management etc.

Application of software tools in research ( practice session).

***

Section – B ( Marks Allotted :40)Computer Application:

Word Processing Tool: Simple typesetting, type size, Documents class, page style, page numbering.Formatting length, wood count, parts of a documents. dividing a documents, spell check, insertion ofobjects in a text, Word Processing tools like MS-Word, Latex, Open Office or similar tool.

Spreadsheet Tools: Introduction to spreadsheet application, features and function, Using formulas andfunction, Data storing, Features for Statistical data analysis, Generating charts/ graph and otherfeatures, Tools used may be Microsoft Excel, Open Office or similar tool.

Presentation Tool: Introduction to presentation tool, features and function, Creating presentation,Customizing presentation, Showing presentation, Tool used may be Microsoft Power Point, Open Officeor similar tool.

Web Search: Introduction to Internet, Use of Internet and WWW, Using search engine like Google,Yahoo etc. Using advanced search techniques.

Application of Internet in research: INFLIBNET, Use of Internet, Sights (DOAJ), Use of E Journals, Use ofE-library

Research Communication:Basics of Communication skill: need and features, English Grammar, Word Choice, Sentence Structure,paragraph structure, Types of Scientific Communication, Importance of Publishing research paper:Preliminaries, Format, Choosing Journal, Title, Running Title, Authors: Single and Multiple authorship.Writing Abstract, Selecting Keywords, Introduction Section, Materials and Methods Section, ResultSection, Figures, Designs, Principles, Legends, Table Components, Graphs, Discussions Section: Format,Grammar Style, Content, Acknowledgements, References: Different Styles, Communication with theEditor, Handling referee’s comments. Writing Review Articles, Preparing Posters for ScientificPresentation, Preparing and Delivering of Oral Presentation, Writing Practical Reports. AvoidingPlagiarism.

***

Reference Books:

• Montgomery, Douglas C. (2007), 5/e Design and Analysis of Experiments, (Wiley India)

• Montgomery, Douglas C. & Runger, George C. (2007), 3/e, Applied Stoical & Probability for Engineers (Wiley India)

• Kothari C. K. (2004), 2/e Research Methodology – Methods and Techniques (New Age International, New Delhi)

• Krishnaswamy, K.N. Sivakumar, Appa Iyar and Mathiranjan M. (2006)m Management Research Methodologyl;Integration of Principal, Methods and Techniques ( Pearson Education, New Delhi)

• The Complete Reference Office Xp – Stephan L. Nelson, Gujrat Kelly (TMH)

• Basic Computer Science and Communication Engineering – R. Rajaram (SCITECH)

• Book for Open Office

• Bajpai S. R. (1975) Methods of Social Survey and Research , Kitabghar, Kanpur

• Hans Raj (1988) Theory and Practical in Social Research, Sujeet Publication, Kolhapur

• Krishnaswami O. R. (1988) Methodology of Research in Social Science , Himalaya Pub. House

• Kothari, C.R. (2005) Quantative Technique, New Delhi, Vikas Publication House.

• Gautam, N.C. (2004) development of Research tools, New Delhi, Shree Publishers.

• Gupta, Santosh (2005) Research Methodology and Statistical Techniques, Deep and Deep Publications.

• Chandera A. and Saxsena T.P. (2000) Style Manual, New Delhi, Metropolitan Book Comp. Ltd.

• Shukla, J.J..(1999) Theories of Knowledge, Ahmadabad, Karnavati Publication.

• Bhattacharya, D.K. (2004) Research Methodology, New Delhi, Excel Books.

• Brymann, Alan and Carmer, D. (1995) Qualitative data analysis for social scientist, New York, Routeledge Publication.

• Best J.W. and Khan J.V. (2005) Research in Education New Delhi, Prentice Hall India.

• The complete reference Office Xp- Stephan L. Nelson, Gujulia Kelly (TMH).

• LATEX Tutorials, A primer by Donald knuth.

• First steps in Latex- George Gratzer.

• Write and Publish a Scientific Paper by Robert A. day, Oryx Press.

• Scientific Easy when you know how by Jennifer peat, BMJ Books.

of 6

ROLL NO. :

CHHATTISGARH SWAMI VIVEKANAND TECHNICAL

UNIVERSITY, BHILAI Application form for appearing in the Entrance Examination/Personal Interview for

Ph.D. Programme, 2017

(For filling this application form please refer to the instructions)

Discipline: ……………………………............................ Specialization: ………………………………………………... (As per Ph.D. Syllabus )

1. Name (In Block Capital Letters Only) .......................................................................................................

(As per academic record) .......................................................................................................

2. Date of Birth (enclosed HS/HSS

certificate photocopy)

D D M M Y Y Y Y

3. Nationality ...................................................................................................

If foreign Nationality, write name of the Country ....................................................................................................

4. Sex M F Other

5. Father’s / Husband’s Name .................................................................................................................... Mobile No. ....................................................................................................................

6. Mother’s Name .....................................................................................................................

7. Address for Correspondence …………………………………………………………………………..

…………………………………………………………………………...

…………………………………………………………………………...

Email-ID …………………………………………………………………………...

Mobile No. …………………………………………………………………………...

8. Permanent Address …………………………………………………………………………...

…………………………………………………………………………...

…………………………………………………………………………...

9. Category UR OBC SC ST Others

10. In case of physically challenged, write Yes or No

In case of physically challenged indicate type of disability

Entrance Test Test Exempted 5 5 5 5 5 5 5 5 5 5

Yes No

Ortho Visual Hearing

Affix Recent Colour photograph

of 6

11. Academic Record (from class 12th

on wards)

S.

N.

Name

of the

Exam

Institute/College

(Name &

Address)

University/Board Discipline/Subject Specialization,

if any

Year of

Passing

%

Marks

&

Division

1

2

3

4

UGC/CSIR (JRF)/NET/GATE/SLET, other Fellowship Examination Details

Name of

Examination

Examination Discipline Year Result

1

2

3

12. Working/Research Experience/Teaching Experience

S.

N.

Duration Employer Post Nature of

Appointment

CSVTU, Bhilai Updated

seniority list sr. no. with year From To

13. Research papers published (Please provide detail in a separate sheet)

No. of Research Papers published in Journal No. of Research Papers presented in Conference

14. Are you pursuing any course currently, if yes gives details

…………………………………………………………………………………………………………………

15. Whether any disciplinary action has been taken against you? If so, state reasons, the punishment

awarded and reference of authority awarding the punishment

…………………………………………………………………………………………………………………

………………………………………………………………………………………………………………….

16. Details of Demand Draft / E-payment (Online)

a) Amount Rs. ____________ DD. No. _______________ Date ____________________

b) Issued by (Bank Name & Branch) ____________________________________________

c) E-payment no. and Date

Note: The application fee of Rs. 1000/- must be paid through demand draft in favour of Registrar, Chhattisgarh Swami

Vivekanand Technical University, Bhilai from any nationalized bank or online fee collection mode of CSVTU website. Prefer

online submission system of the University.

Yes No

of 6

Declaration by the applicant

I do solemnly affirm that I have not been punished for any act of indiscipline nor I have adopted any unfair means in any

examination nor involved myself in any other offense whatsoever.

I further solemnly affirm that information furnished by me in this application form are true; and that the certificates and

the Photostat copies of the documents I have submitted, are genuine and that I have not concealed any relevant information.

I further affirm that if at any stage hereafter it is found that the information and the undertaking furnished by me were not

true then:-

My registration be immediately cancelled without any notice.

That I shall be liable to refund the scholarship/any financial aid received from the University/any other source during my

Ph.D. programme.

That I shall be debarred from future admission in any academic course and employment at this University and if already

employed I shall be dismissed without any notice.

Strike out the clause not applicable and put a tick mark in the appropriate box-

I have submitted the Transfer and Migration certificates.

I have not submitted the Transfer and Migration certificates, but will submit the same within 3 months, if admitted.

I also solemnly affirm that as per the CSVTU Modified Ordinances I shall not concurrently pursue any other full time

academic course either at this or any other University. If found doing so I shall be liable to the aforesaid actions and punishment.

Place:...................... Signature

Date:....................... Name:

of 6


Ph.D. Entrance Exa mination /Personal Interview Year 2017

ROLL NO.:

ADMISSION SLIP

Examination Centre: Bhilai Institute of Technology (BIT), Durg

Na me of the Candidate : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Discipl ine: ........................................................................................................

Address : .............................................................................................................

.............................................................................................................

is permitted to appear in the Entrance Examination/Personal Interview for Ph.D. Programme 20........... Specimen signature of the applicant

Date: S ig nature of I s suing Off icer

Seal

Note: Valid ID proof is must during examination

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


Ph.D. Entrance Exa mination/Personal Interview Year 20 17

ROLL NO.:

ATTENDANCE SLIP

Examination Centre: Bhilai Institute of Technology (BIT), Durg

Na me of the Candidate: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Discipl ine: ........................................................................................................

Addres s: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.............................................................................................................

.............................................................................................................

is permitted to appear in the Entrance Examination/Personal Interview for Ph.D. Programme 20............


The following is to be filled by the invigilator during the examination: Test Name Date of Exam Signature of the Examinee Signature & Name of the Invigilator

Written Test

Personal Interview

S ignature of Centre Supdt .

Seal

5 5 5 5 5 5 5 5 5 5

5 5 5 5 5 5 5 5 5 5

Affix Recent Colour

photograph

Affix Recent Colour

photograph

of 6

CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVER SITY,

BHILAI

INSTRUCTIONS FOR FILLING THE FORM

Either TYPE or PRINT the entries on the form neatly.

All items require you to submit an self attested copy of a document.

Documents to be enclosed are given in the checklist.

The application fee of Rs. 1000/- must be paid through demand draft in favour of Registrar, Chhattisgarh Swami

Vivekanand Technical University, Bhilai payable at Bhilai from any nationalized bank or online fee collection

mode of CSVTU website.

The candidate should write his/her name at the back of Demand Draft.

All photographs affixed must be the same.

Syllabus of Ph.D. Programme is available in the University Website.

CHECKLIST (TICK √ THE ENCLOSED DOCUMENTS) SEND ONLY ATTESTED COPIES

(NOT ORIGINALS)

1. Proof of Date of Birth (DOB).

2. Copy of SC/ST/OBC Certificate, if applicable.

3. Copy of UGC/CSIR (JRF)/NET/GATE/SLET/GPAT score card.

4. Copies of marks/grade sheets of U.G. and P.G. programme completed.

5. List of Technical papers published, duly signed by the applicant.

6. No Objection/relieving Certificate from employer (for employed candidates).

7. The Demand draft for the application as applicable.

8. Two self addressed stamped (Rs. 5/- each) envelopes of 23 cm x10 cm in size.

9. Experience certificate of regular/contract appointment where applicable as per the modified Ordinance

no. 10 of CSVTU, Bhilai.

LIST OF DISCIPLINE IN WHICH CURRENTLY Ph.D. PROGRAMMES ARE BEING

CARRIED OUT:

Applied Chemistry

Applied Mathematics

Applied Physics

Humanities

Pharmaceutical Sciences

Biotechnology

Management

Civil Engineering



Electrical and Electronics Engineering

Electronics & Telecommunication Engineering

Electronics and Instrumentation Engineering

Computer Sciences & Information Technology


Information Technology

Chemical Engineering

THE COMPLETED APPLICATION FORM MUST REACH ON OR BEFORE “05/06/2017”

The application should be submitted to the Principal/Director of the designated Centre

of Research

of 6

Scrutinization by Departmental Research Committee (DRC) Date of DRC meeting . . . . . . . . . . . . . . . . . .

The applicant is duly recommended/not recommended by DRC.

The candidate is required / not required to appear in entrance test if exempted, give reason

.................................................................................................................................................................

.................................................................................................................................................................

Any other remarks. .......................................................................................................................................

S. No. Name of the DRC Member Status Signature

1.

Chairman

2.

VC Nominee CSVTU, Bhilai

3.

Member

4.

Member

5. Member

Forwarded by Head of the Institution

Signature

Principal/Chairman DRC

Seal