chess set no supports - media.prusaprinters.org · this is a simple and elegant chess set that was...
TRANSCRIPT
13.58 hrs
1 pcs
f
0.15 mm
k
0.40 mm
h
1
95.00 g
d
PrusaMK3/S
Summary
This is a simple and elegant Chess set that was designed in fusion 360from the ground up to be very 3D Printer friendly.
The Goals were:
To make the Chess set look like a Chess set, most of the 3D printablechess sets either need lots of support or look very non standard tomake the geometry easier to printTo have the Chess set print easily and beautifully on a 3D printer.which means no Supports and no underside curves.
Happy to say that both design goals were meet and I am looking forwardto hearing your feedback. Enjoy
Toys & Games > Board games
supports support set no chess
Supports: No Seam Position: Rear Top Fill Pattern: Concentric
Jacob G
Chess Set NoSupports
VIEW IN BROWSER
updated 11. 6. 2020 | published 4. 6. 2020
1.
2.
Print Files (.gcode) DOWNLOAD ALL FILES
50.8 MB
13.58 hrs f 0.15 mm k 0.40 mm h PLA 94.50 g d PrusaMK3/S
updated 4. 6. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
625.4 KBupdated 4. 6. 2020
35.0 KBupdated 4. 6. 2020
690.8 KBupdated 4. 6. 2020
1.4 MBupdated 4. 6. 2020
625.4 KBupdated 4. 6. 2020
2.7 MBupdated 4. 6. 2020
3mf files are set to: 1.5mm layer Height Prusamant PLA
chess_set_015mm_pla_mk3s_13h35m.gcode
pawn-v5.3mf
king-cross-v2.stl
bishop-v12.3mf
king-v2.3mf
rook-v1.3mf
bishop-v12.stl
2.4 MBupdated 4. 6. 2020
2.5 MBupdated 4. 6. 2020
1.1 MBupdated 4. 6. 2020
2.6 MBupdated 4. 6. 2020
3.9 MBupdated 4. 6. 2020
2.4 MBupdated 4. 6. 2020
619.0 KBupdated 4. 6. 2020
10.4 MBupdated 4. 6. 2020
License
This work is licensed under a Creative Commons (4.0 International License)
rook-v1.stl
king-body-v2.stl
knight-21-v3.3mf
pawn-v5.stl
knight-21-v3.stl
queen-20-v3.stl
queen-20-v3.3mf
chess-set.3mf
Attribution—NoDerivates
✖ | Sharing without ATTRIBUTION ✖ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition