chen rong 584445 setchbook

31
Algorithmic Sketch Book Rong Chen

Upload: rong-chen

Post on 13-Mar-2016

236 views

Category:

Documents


1 download

DESCRIPTION

 

TRANSCRIPT

Page 1: Chen rong 584445 setchbook

AlgorithmicSketch BookRong Chen

Page 2: Chen rong 584445 setchbook

Vector Foundamental

Page 3: Chen rong 584445 setchbook

Mesh

Curve Menu

Page 4: Chen rong 584445 setchbook
Page 5: Chen rong 584445 setchbook

Transform Menu

Page 6: Chen rong 584445 setchbook
Page 7: Chen rong 584445 setchbook
Page 8: Chen rong 584445 setchbook
Page 9: Chen rong 584445 setchbook

Week 4

Page 10: Chen rong 584445 setchbook
Page 11: Chen rong 584445 setchbook
Page 12: Chen rong 584445 setchbook
Page 13: Chen rong 584445 setchbook
Page 14: Chen rong 584445 setchbook
Page 15: Chen rong 584445 setchbook
Page 16: Chen rong 584445 setchbook
Page 17: Chen rong 584445 setchbook
Page 18: Chen rong 584445 setchbook
Page 19: Chen rong 584445 setchbook
Page 20: Chen rong 584445 setchbook

Image Sampler

Page 21: Chen rong 584445 setchbook
Page 22: Chen rong 584445 setchbook

Reverse Enginner

Page 23: Chen rong 584445 setchbook
Page 24: Chen rong 584445 setchbook

Connection for panels Definition

Page 25: Chen rong 584445 setchbook
Page 26: Chen rong 584445 setchbook

Wind Analysis Definition

1. Divide the surface into desired number of pieces2. Extract the normal vector of each pieces of the vector3. Determine the wind vector4. project the wind vector into the normal vectors obatained in step 25. visualize the pieces of the surface by the degree of fitness between the pieces nor-mal vector and the wind vector.

Page 27: Chen rong 584445 setchbook
Page 28: Chen rong 584445 setchbook

Wind Analysis Definition

Page 29: Chen rong 584445 setchbook
Page 30: Chen rong 584445 setchbook

Final Definition for Project

1. Create surface with diamond panels 1.1 Mesh the surface with U value of 4 and V value of 80 1.2 Use the Weaverbird Midedge subdivision command to create lines of diamond pattern on the surface. 1.3 Rebuild the diamond surfaces with the lines obtained in step 1.2.

2. Steel Frame 2.1 Offset the lines obtained in step 1.2. 2.2 Use pipe component to create the steel frame.

3. Panels 3.1 Scale down the border of the surface to get a concentric parallelogram of the border. 3.2 Loft the original border and 3.1. 3.3 Use the centre point of the general shape to scale 3.1. 3.4 Loft 3.1 and 3.3.

Page 31: Chen rong 584445 setchbook

4. Energy generators 4.1 Create a group of parallel lines in the parallelogram 3.3 by dividing and lining corre-sponding points on it. 4.2 Pipe 4.1. 4.3 Find the points that the cantilevers of the energy generators should be located on by dividing 4.1 by the spacing of each generators. 4.4 Move the points by the vector defined by the points of the centre of 3.3 and the centre of 3.1. 4.5 Line up the two groups of points obtained in 4.4. 4.6 Pipe 4.5. 4.7 Draw a rectangular at the end pointing outward of 4.5 and offset it to create a box.