check e1 status huw sites@citrix
DESCRIPTION
Check E1 Status Huw Sites@CitrixCheck E1 Status Huw Sites@CitrixCheck E1 Status Huw Sites@CitrixCheck E1 Status Huw Sites@CitrixCheck E1 Status Huw Sites@CitrixTRANSCRIPT
-
1 | P a g e
Ahmed Hussien Bebars [email protected] Mob:01024614238
Open Citrix icon & enter user name & password to access U2000 Server
Choose M2000 icon and enter user name and password as show in fig
-
2 | P a g e
Ahmed Hussien Bebars [email protected] Mob:01024614238
Choose main Topology Icon as show in fig
-
3 | P a g e
Ahmed Hussien Bebars [email protected] Mob:01024614238
After main page open press CTRL+F to open search window as show In fig
-
4 | P a g e
Ahmed Hussien Bebars [email protected] Mob:01024614238
Write site number , at result you will find site 2G & 3G, assume we will work on 2G press on it,
To know BSCH, press left click on free space you will find BSCH appear at left window
BSCH
-
5 | P a g e
Ahmed Hussien Bebars [email protected] Mob:01024614238
Right click on BSCH and choose MML Command as show in fig
MML Command Window
-
6 | P a g e
Ahmed Hussien Bebars [email protected] Mob:01024614238
To know number of E1 connected on RBS write command: LST BTSConnect, and choose index type by
name & write site name as show in fig
No of E1 appear at Result as show in fig
-
7 | P a g e
Ahmed Hussien Bebars [email protected] Mob:01024614238
To check E1 status: you should know E1 port on BSCH as show in fig
Use command DSP E1T1
Complete E1 port data as show in fig & choose Board type OIUa, if no result choose EIUa
-
8 | P a g e
Ahmed Hussien Bebars [email protected] Mob:01024614238
E1 status result as show in fig, you should back to RBS alarm to check if no alarm or not, because E1 will
be up if there are loop or RBS connected direct and up
-
9 | P a g e
Ahmed Hussien Bebars [email protected] Mob:01024614238
If there is loop and E1 up and RBS has E1 alarm down, press right click on RBS and choose Query alarm
event >Current alarm as show in fig