chapter 1: tools of geometry 1-2 drawings, nets, & other models
TRANSCRIPT
Chapter 1: Tools of Geometry
1-2
Drawings, Nets, & Other Models
Objectives
• To make isometric and orthographic drawings
• To draw nets of three-dimensional figures
Isometric Drawing
• “isos” = equal
• “metron” = measure
• All 3-D measurements are scaled equally
• Use isometric dot paper to show three sides of a figure from a corner view
Example 1
• Make an isometric drawing of the cube structure on page 10 of your book.
Orthographic Drawing
• Shows a top view, a front view, and a right-side view
• Like a blueprint of a building
Example 2
• Make an orthographic drawing of the figure on page 11 of your book.
Foundation Drawing
• Shows the base of a structure and the height of each part
• Used for skyscrapers!
Example 3
• Make a foundation drawing for the isometric drawing on page 11 of your book.
Nets
• Two-dimensional pattern that you can fold to form a three-dimensional figure
• Shows all of the surfaces of a figure in one view
Example 4
• What figure will this net make?
Example 5
• Draw a net for the graham cracker box.
Homework
• P. 13-15
• 1-16 all (with work)
• 23-26
• 28-30