Page | 1 of 4

Visit www.supercheapauto.co.nz/how-to/ for more DIY articles, advice & videos

CHANGING WIPER REFILL AND ASSEMBLY

If you notice any streaking or smearing on your windscreen, chattering or noisy

operation of your wiper blades and assembly, physical wear or damage to the

blades themselves – it’s time to change your wiper blades!

Damage can be in the form of frayed or torn wiper blades, or excessive movement,

corrosion or frame deterioration to the actual wiper assembly.

Changing wiper blades might look easy but it can be a little frustrating if you've never done it before. If you prefer

some assistance then ask in your local Supercheap Auto store as we have a range of fitment services.

Tips and warnings

• Don’t forget to top up your windscreen washer reservoir with clean water and decent quality windscreen wash

additive.

• When replacing the blade only, ensure the backing is seated correctly in each claw. If it isn't, the blade could

become loose and cause serious damage to your glass.

Procedure Before you start Make sure the width of the wiper refill selected is correct - refer to catalogue in store or measure the blade claw width yourself.

Replacing wiper blades: Step 1 Lift blade assembly from the windscreen.

What you’ll need:

� New wiper blades or wiper assemblies

� Pliers

Page | 2 of 4

Visit www.supercheapauto.co.nz/how-to/ for more DIY articles, advice & videos

Step 2 Remove the old blade by squeezing the end with the clip attached together and withdrawing it from the assembly.

Step 3 Insert the new wiper refill into all blade claws and firmly lock the metal retaining clip into the end claw. Ensure that all the claws are engaged in the backing, if you don’t do that, you can damage your windscreen.

Step 3 Insert the new wiper refill into all blade claws and firmly lock the metal retaining clip into the end claw. Ensure that all the claws are engaged in the backing, if you don’t do that, you can damage your windscreen. If you’re fitting multi-fit blades, check that the correct recess has

been used. For 6.5mm width blades, slide the refill through the top recess. For 8.5mm width blades, slide it through the bottom

or widest recess.

Step 5

Whilst holding the blade, cut the refill to the required length, but leave a

minimum of 25mm from the end claw.

Page | 3 of 4

Visit www.supercheapauto.co.nz/how-to/ for more DIY articles, advice & videos

Replacing the wiper assembly:

Step 1

Lift the blade assembly from the windscreen.

Step 2

In the centre you will notice the point where the assembly pivots on the

arm. Depress the clip on the underside of the hook to release blade

assembly. Slide downwards on arm to remove from hook.

Step 3

Using the old blade assembly, identify the style of adapter required and

choose the correct one provided with the new blade assembly. Clip on

the adapter, and slide the new assembly onto the arm.

Step 4 Ensure blade assembly locks onto arm. You should hear a click.

Page | 4 of 4

Visit www.supercheapauto.co.nz/how-to/ for more DIY articles, advice & videos

Step 5 Lower the blade assembly to the windscreen. Check that it will wipe the screen correctly.

Consider changing to a Tridon Flexblade, available in store. This is a complete wiper assembly replacement and is the very latest in wiper technology. It ensures even pressure distribution, which eliminates streaking. It’s aerodynamic, and has advanced rubber technology, giving you a nice smooth, quiet wipe. Most importantly, they are easy to install. You may also want to take advantage of our wiper accessories which include:

• 1.5L capacity universal washer kit

• Washer motors suitable to most Ford’s and Holden’s

• Windscreen wash additive Important: The film and text transcript in this website are intended to be an information source only. Super Cheap Auto Pty Ltd makes no statements, representations or warranties about the accuracy or completeness of the films. Super Cheap Auto Pty Ltd asserts its full rights under copyright law. The films in this website may be used or reproduced in whole for non-commercial and/or personal use provided that any reproduction is unaltered and that an attribution of the source is included. The film may not be altered, built upon or transformed. Super Cheap Auto Pty Ltd disclaims all responsibility and all liability (including, without limitation, liability in negligence) for all expenses, losses, damages and costs incurred as a result of the information in any films being inaccurate or incomplete in any way, and for any other reason.