challenge-single cornering machine
TRANSCRIPT
-
8/9/2019 Challenge-Single Cornering Machine
1/2
-
8/9/2019 Challenge-Single Cornering Machine
2/2
Cut CornersOn Big Jobs
Hydraulic Cornering
Machine Features 6 Sizes of
Cornering Knives
Handles Any
Size Sheet
Four Inch Lift
Capacity
Hydraulic Powered
Precise Cutting Action
Gravity Chip Disposal
Lighted Table
Manual Cornering
Machine Features 6 Sizes of
Cornering Knives
Handles Any
Size Sheet
Two Inch Lift
Capacity Manual Operation
Precise Cutting Action
Gravity Chip Disposal
The Finishing Touch
Dependably accurate cutting with
each cornering stroke gives your
jobs an added professional quality.
Corner Any Size StockThese single cornering machines
will handle any size stock on their
open tables.
Greater ProductionWhether using the hydraulic or
manual model, you will increase
your production with the large
lift capacity. Challenge corneringmachines minimize operator
fatigue and provide the power
needed for cornering difficult
jobs of index and coated stock.
Convenient Chip Disposal
Cornering chips drop down behind
the knife into a removable bin.
Precision CorneringSix different sized cornering knives
and dies are available for the
Challenge cornering machines.
Each machine comes with one
knife and die set (specify size
when ordering).
Meeting Your NeedsFor more information on the
Challenge Cornering Machines orother bindery products to help
increase your production, contact
your authorized Challenge dealer.
2003 The Challenge Machinery Company. All rights reserved. Printed in the U.S.A. ADV-011/0803/2M/CSP/16563
Specifications
CORNERING HYDRAULIC MANUAL
Maximum Lift Height 4 / 10 cm 2 / 5 cm
Range Of Lift Widths Open
Corner Sizes Handled 18, 14, 38, 12, 58, and straight*3 mm, 6 mm, 13 mm, 16 mm, and straight*
* (1-14/3.2 cm max.,1/2.54 cm recommended)
DIMENSIONS
Table Depth 24 / 61 cm
Table Width 20-14 / 51.5 cm
Table Height 36 / 91 cm
Height Overall 52 / 132 cm
Floor Space Required 24 x 20-14 / 61 x 51.5 cm
Net Weight 190 lbs / 86 kg 145 lbs / 66 kg
Shipping Weight (approx.) 265 lbs / 120 kg 220 lbs / 100 kg
ELECTRICAL (hydraulic machine only)
Standard Motor: 1/2 H.P., 60 Hz, A.C.,115 Volts, 13.5 Amps.,
Service size 20 Amps.Note: Special NEMA 5-20R required for 20 Amp service.
CORNERING
Challenge reserves the right to make changes to any product or specification without notice and without incurring
responsibility to existing units.
Challenge is a registered trademark of The Challenge Machinery Company.
For information on this and other Challenge products,call yourlocal Challenge dealer. For the dealer nearest you, contact:
The Challenge Machinery Company6125 Norton Center Dr, Norton Shores, MI 49441-6081 U.S.A.
231-799-8484www.ChallengeMachinery.com
1/8"
1/4"
3/8"
1/2"
5/8"
straight diagonal(114" maximum)
(shown actual size)