cetol wb srdcetol ® wb srd - multi-use, waterborne one-coat protection n maintenance procedures to...
TRANSCRIPT
Cetol® WB SRD
Exterior wood surfaces are exposed to
a variety of harsh elements. Ultraviolet
rays, rain, sleet and snow all contribute
to damaging those surfaces. The wood
finish experts at Sikkens understand
these challenges. The choice is simple.
Cetol WB SRD offers a high-quality,
affordable, one-coat, easy-to-use product
to protect and beautify your home.
Cetol® WB SRD
© 2010 Akzo Nobel Paints LLC, All Rights Reserved. ® and TM indicate trademarks of the AkzoNobel group of companies unless otherwise indicated.
2010033040260
Waterborne, Translucent Wood Finish
One-Coat
Protection for Wood
n Products to Know
Support your local dealer:
Cetol® is the brand name of Sikkens products that fall into either the Semi-Transparent, Translucent or Clear categories. When you see a product with Cetol on the label, this product will allow you to see the wood grain and character of the wood (although depending on the product it may color the wood).
Rubbol® is the brand name of Sikkens products that fall into the Opaque or Solid Color coatings. This product line dates back to the 1930’s when Sikkens innovative research and development engineered Rubbol as one of the first flexible coatings for the European market. It is this name Rubbol which personifies the flexibility, breathability and durability of these product lines.
Akzo Nobel Paints LLC
Sikkens Wood Finishes
117 Brush Street
Pontiac, MI 48341-2215
1-866-SIKKENS
www.nam.sikkens.com
email: [email protected]
added new adstock number from Mary Ann: 30402603-18-10 draft
Cetol SRD WB Brochure_3-11-10.indd 1 3/18/10 1:18 PM
Cetol® WB SRD - Multi-use, Waterborne One-Coat Protection
n Maintenance ProceduresTo help maintain its protective characteristics, apply a maintenance coat of Cetol WB SRD when visually required.
1. Follow the cleaning recommendation.2. Apply one coat of Cetol WB SRD.
Tips• Areasthathaveminimumwearshouldonlybelightlycoated.• Hardwoodsurfacesmayrequiremorefrequentmaintenance.
005 Natural Oak
045 Mahogany
077 Cedar
089 Redwood
078 Natural
072 Butternut
009 Dark Oak
085 Teak
Cetol® WB SRDSikkens developed Cetol WB SRD as a one-coat, waterborne translucent exterior wood finish for use on a variety of exterior wood surfaces. The hybrid alkyd/acrylic formula is designed to give the advantages of both an alkyd and an acrylic. Cetol WB SRD contains optimal amounts of translucent iron oxide pigments and UV light stabilizers. This unique waterborne formulation is another example of the advancements central to the Sikkens Next Wave Technology.
Recommended Forn Sidingn Railsn Decksn Shakesn Shingles
n Fencesn Boat Docksn Outdoor Furnituren Logs
Eight Natural Colors AvailableNote:Printedcolorsshownheremayvaryfromactualproductcolors.
n Preparation ProceduresNew,Weathered(UncoatedWood)The best method to prepare wood surfaces is to sand with 80-120 grit sandpaper for vertical surfaces and 60-80 grit sandpaper for horizontal. For optimal performance and appearance on new cedar decks, mechanically sand with 60 - 80 grit sandpaper. Always sand in the direction of the wood grain. An alternative to sanding for preparation is listed below.Cleaning Recommendation
1. Clean the surface with a solution of four ounces of 100% powdered Tri-Sodium Phosphate (TSP) or phosphate-free substitute plus one quart of liquid bleach in three quarts of water. Apply this solution generously to the wood with a garden pump sprayer.
2. Let the solution sit on the wood for 15-20 minutes. During this period, scrub the surface with a hard bristle brush to help remove mill glaze and/or weathering. Keep the wood wet. Do not let the solution dry on the wood.
3. Power wash the cleaning solution from the wood with clean water. To prevent damaging the wood, do not exceed 500 psi. The nozzle must be a maximum of one foot from the surface for full effectiveness.
4. Let the surface dry for 48 hours before applying the coating.5. If there are any glossy patches, scuff sand with 80 grit sandpaper.6. Cetol WB SRD should be applied within one week of preparation for horizontal
surfaces (decks) and within four weeks on vertical surfaces (siding).Tips
• Newpressure-treatedlumberrequiresasix-weekdryingperiodpriortoapplication.Water-repellenttreatedlumberrequiresoneyearofweatheringpriortoapplication.
•Newrough-sawnwoodlessthanfourweeksoldshouldbedry-brushedusingabrushwithstiffbristlestoremoveloosedirtandfibers.Ifdebrisisstillpresent,followthepreparationprocedures.
• Weatheredgreywoodorwoodaffectedwithbluefungiorrustfromnailsmaybetreatedafterthesurfacepreparationbyapplyingasolutionoffourouncesofoxalicacidcrystalsinagallonofwarmwater.Thissolutionshouldbeallowedtositontheaffectedareasfor15-20minutesbeforethefinalrinsewithcleanwater.Letdry48hoursbeforecoating.
• Forapplicationonexotichardwood,immediatelypriortoapplyingcoatingwipesurfacewithacetone.
•Itisalwaysrecommendedtoperformaone-coatcolortestonasampleofthewood.Colorcanvarywithapplication,porosityandtypeofwood.
• Previous coatings must be removed prior to the application of Cetol WB SRD.
n Application ProceduresCoverage area for Cetol WB SRD is 300-400 sq. ft./U.S. gal. (smooth wood) and 150-250 sq. ft./U.S. gal. (rough, weathered wood).
1. Follow the Preparation Procedures.2. Apply only one coat of Cetol WB SRD. Brushing is the preferred method of application
using a nylon-polyester brush. If spray or roller applied, back brush immediately to ensure penetration and to avoid an uneven finish.
3. Clean tools with warm water and soap.
Working With Cetol WB SRD
Application Do’s ...• Applywhenthesurfaceandairtemperature
is50°F/10°Cto80°F/26°C• Stirthoroughlybeforeandoccasionallyduringuse• Saturateallendgrains• Toavoidlapmarks,startatoneedgeand
followthroughtotheendoftheboardmaintainingawetedge
• Applyindirectionofthegrain• Backprime(ifpossible)• Intermixbatchestoensurecolorconsistency• Waitatleastsevendaysbeforemoving
furniturebackontothedecksurface
Application Don’ts ...• Donotapplyinthedirectsunlightoron
surfaceshottothetouch• Donotapplywhenrain,deworfrostis
presentorexpectedwithin24-48hours• Donotapplywhenthemoisturecontent
ofthewoodisgreaterthan18%• DonotuseCetolWBSRDunderneath
otherSikkenswoodfinishingsystems• Donotthin
Cetol® WB SRD Performance Highlights
Feature Benefits
One-coat application Easy to use
High-quality translucent iron oxide pigments
Excellent UV protection and wood clarity
Good for decks and siding
Multi-use product for a variety of applications
Hybrid Alkyd/AcrylicBest properties of alkyds and acrylics such as penetration, color retention, adhesion and water clean-up
3/8/10, per scott blackapplication do's: changed temperature to 50 F to 80F (10 C to 26C).application don'ts: changed moisture content >21% to >18, changed application when rain/dew, etc to "24 to 48" hours
3/11/10inserted Next Wave copy
3/15/10added colorant info copy
Next Wave Technology™ is founded on European state-of-the-art advanced capabilities tailored for North American tastes and lifestyles. AkzoNobel remains dedicated to combining simple application with superior performance, exhibiting the signature,
enduring quality and beauty of Sikkens. Next Wave Technology is part of our commitment to ensure
that for those who demand the best, Sikkens delivers.
ThetintablebaseusespigmentsspecificallydevelopedforusewiththeSikkensCetol®WBSRDbaseonly.Thepigmentsarepre-measuredin4ozand16ozbottlesforin-storemixingtoproducethewoodfinishcolor(s)desired.
Cetol SRD WB Brochure_3-11-10.indd 2 3/18/10 1:18 PM