INVOICE NO : 04/2015 - 16 TIN NO : 29920110183

TO: Date:24.07.2015

M/s. KRISHVI PROJECTS PVT LTD.No.2,FIRST FLOOR,AIRPORT ROAD, DOMLUR,BANGALORE-560 071.

Sir,

Thanking you Yours faithfullyFor SREE HANUMAN ELECTRICALS

PROPRIETOR

SUB: FINAL BILL FOR H.T AND L.T. EXTERNAL ELECTRIFICATION WORKS (PART - A) CARRIED OUT AT M/s. KRISHVI BOUGAINVILLEA APARTMENT, INDIRANAGAR, BANGALORE WITH MATERIALS AND LABOUR CHARGES AS PER TENDER SPECIFICATIONS. (CUMILATIVE)

With reference to above, we are doing Internal and External Electrification works at M/s. KRISHVI BOUGAINVILLEA APARTMENT, INDIRANAGAR, BENGALURU, with Materials and Labour Charges as per Tender specifications.

Now we are here with submitting FINAL BILL for H.T. and L.T. EXTERNAL ELECTRIFICATION works (PART - A). (Bill Amount Rs.3,94,887/-)

TIN NO : 29920110183

Date:24.07.2015

Yours faithfullyFor SREE HANUMAN ELECTRICALS

PROPRIETOR

SUB: FINAL BILL FOR H.T AND L.T. EXTERNAL ELECTRIFICATION WORKS (PART - A) CARRIED OUT AT M/s. KRISHVI BOUGAINVILLEA APARTMENT, INDIRANAGAR, BANGALORE WITH MATERIALS AND LABOUR CHARGES AS PER TENDER SPECIFICATIONS. (CUMILATIVE)

With reference to above, we are doing Internal and External M/s. KRISHVI BOUGAINVILLEA APARTMENT,

INDIRANAGAR, BENGALURU, with Materials and Labour Charges as per

for H.T. and L.T. EXTERNAL ELECTRIFICATION works (PART - A). (Bill Amount Rs.3,94,887/-)

Project : Krishvi BouganvilleaClients : Krishvi Projects Ltd

Subject :Summary for Electrical Works

SL NO PARTICULARS AMOUNT

PART A

1 HT yard Works Rs. 1,003,630.00

2 LT Electrical works Rs. 1,609,471.20

TOTAL FOR PART A Rs. 2,613,101.20

TOTAL "A" Rs. 2,613,101.20

Less: discount: @3% Rs. 78,393.04

TOTAL Rs. 2,534,708.16

Total of Non Tender Items for HT Rs. 19,500.00

Total of Non Tender Items for LT Rs. 121,098.00

Rs. 140,598.00

Rs. 2,675,306.16

Work Contract Tax @ 4% Rs. 107,012.25

GRAND TOTAL Rs. 2,782,318.41

Rs. 1,200,000.00

TOTAL Rs. 1,582,318.41

LESS 1st RUNNING BILL AMOUNT Rs. 1,197,329.00

TOTAL BALANCE Rs. 384,989.41

ROUND OFF Rs. 384,989.00

Amount Rs: Three Lakhs Ninety Four Thousand Eight Hundred and Eighty Seven Only

Thanking you Yours faithfullyFor SREE HANUMAN ELECTRICALS

GRAND TOTAL OF NON TENDER ITEMS

GRAND TOTAL OF TENDER & NON TENDER ITEMS

Less Advance received for External Works

PROPRIETOR

HT Page 5

Project : Krishvi BougainvilleaSubject : HT Electrical Works

Description Unit @ Part Rate Qty Amount 1 HT SYSTEM

1.2

Proof outdoor IP 65 as per BESCOM Standards.

Supply and Installation No 417,300.00 100% 417,300.00 1 417,300.00 2

HT Cable2.2

Rmt 985.00 100% 985.00 94 92,590.00 2.5

a) Indoor Kit Nos 6,450.00 100% 6,450.00 5 32,250.00

3Transformer

3.1

Supply and Installation Nos 332,000.00 100% 332,000.00 1 332,000.00 4

EARTH ELECTRODES/EARTH STRIPS4.1

Nos 3,750.00 100% 3,750.00 7 26,250.00 4.2

Nos 9,950.00 100% 9,950.00 4 39,800.00

EARTH STRIPS

4.325 x 6 mm GI Earth Strip Rmt 225.00 100% 225.00 55.2 12,420.00

4.425 x 6 mm Copper Earth Strip Rmt 1,150.00 100% 1,150.00 32.8 37,720.00

Boq.No

Tender Rate Rs.

Supply, Errection & Comissioning of 3 Module HT Panel. suitable for 350MVA - Weather

i.e 2Nos.11 KV 350 MVA 400A load break switch (OD) and

1No. 11 KV 350 MVA 400A load break switch with HRC fuse as per BESCOM Standards

Supply, Laying & Ternmination of11 kV 3C - 95 Sq. mm XLPE CableSupply & Fixing of Indoor type End termination of cables using Raychem Heat shrinkable kits 3C-95 Sq.mm

Supply, Errection and Comissioning of Outdoor Oil type TRANSFORMER Off Circuit Tap changing11 KV/433 volts, 250kVA, Both side cable end Boxes.

Supply and Installation of Pipe electrode earth station as per IS 3043 with 38mm dia Class B GI pipe, GI watering funnel with salt, charcoal, 300mm x 300mm chamber cover etc., complete.

Supply and Installation of Plate electrode earth station as per IS 3043 complete with 19mm dia Class B, 600x600x3mm copper plate, 25mm Cu pipe, GI watering funnel set, 300mm x 300mm chamber cover etc., complete.

Supply and Fixing of GI / Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips shall run in pvc heat shrinkable sleeve with necessary hardwares.

HT Page 6

5 MISCELLANEOUS ITEMS5.3

Danger Boards 11000 V.

Supply and Installation Nos 175.00 100% 175.00 4 700.00 5.4

Supply and Installation Nos 5,850.00 100% 5,850.00 2 11,700.00 5.5

Fire Buckets

Supply and Installation Nos 450.00 100% 450.00 2 900.00

TOTAL OF TENDER ITEMS 1,003,630.00

NT ITEMS1

Nos 19,500.00 100% 19,500.00 1 19,500.00

TOTAL OF NON TENDER ITEMS 19,500.00

2.5 Kg CO2 type fire extinguisher

Supply & Fixing of 3Core x 95sqmm Straight through Joint termination kit using Raychem Heat shrinkable kit.

LT Page 7

Project : Krishvi BouganvilleaSubject :LT Electrical WorksBoq.No

Description Unit @ Part Rate Present Bill

Qty Amount 1 L. T. SWITCHGEAR

LT PANELS1.1 LT KIOSK - OUT DOOR TYPE

Supply and Erection Nos 179,000 100% 179,000.00 1 179,000.00 1.2 Metering Panel

Supply and Erection Nos 565,000 100% 565,000.00 1 565,000.00 1.3 Utility Panel

Supply and Erection Nos 167,500 100% 167,500.00 1 167,500.00 2 MCB DISTRIBUTION BOARDS

2.2 Common Area Floor DBIncomer : 1 No of 25A, 4P MCBSub Incomer : 3 Nos 20A DP 100mA RCBOOutgoing- 18 Nos 10A/16A SP MCBSupply Nos 23,500 100% 23,500.00 1 23,500.00

Tender Rate Rs.

Design, Manufacture,Assemble,Supply, Installation Testing & Commissioning of Sheet steel fabricated panel,made out of 2mm thick sheet steel, duly treated by 7 tank process, and powder coated, using only approved components , 35kA Aluminum Bus bars, continuous earth bars, with 2nos.earth terminals, necessary lifting hooks, all necessary gland plates & glands complete as per specifications & single line diagram. All panels with top entry provision. Wherever the breaker and /or multidata meters are with RS 485 ports such ports shall be hard wired and brought to a suitable terminal block in the panel in a selected location in the panel. Only galvanized, Zinc passivated hardware shall be used for assembling.

Wall mounted MCB DBs with MS wire way box on top / bottom & on sides MCBs shall be rated for 10kA with current limiting feature. Dummy ways to be covered with blank plates. All out going ways shall be labeled & laminated as built drawing (SLD) shall be affixed on inside face of DB door. Rates quoted shall include necessary mounting arrangement as per site conditions.

All MCB DBs shall be of Sheet steel enclosure confirming as per specifications

LT Page 8

Installation3 LT CABLES , END TERMINATIONS AND CABLE TRAYS.

3.1.1 3 1/2C x 240 sq. mm- XLPE Rmt 1,390.00 100% 1,390.00 103 143,170.00

3.1.6 3 1/2C x 70 sq. mm- XLPE Rmt 485.00 100% 485.00 9 4,365.00 3.1.10 4C x 16sq. mm- Al. Ar Cable Rmt 195.00 100% 195.00 52 10,140.00

END TERMINATION

3.2.1 3 1/2C x 240 sq. mm- XLPE Supply and End termination Nos 2,700.00 100% 2,700.00 10 27,000.00

3.2.6 3 1/2C x 70 sq. mm- XLPESupply and End termination Nos 750.00 100% 750.00 2 1,500.00

3.2.10 4C x 16 sq. mm-Al. Ar CableSupply and End termination Nos 450.00 100% 450.00 4 1,800.00

3.2.11 4C x 10 Sq. mm copper wiring circuit

Supply and End termination Nos 350.00 100% 350.00 2 700.00 3.2.13 3C x 2.5 Sq. mm - YWY

Supply and End termination Nos 250.00 100% 250.00 2 500.00 3.3 Supply and Fixing of Cable Trays :

3.3.2

Supply and Errection Mtr 535.00 100% 535.00 74.8 40,018.00 4 CIRCUIT MAINS

Supply, and laying of Power cables 1100 V Grade, Copper or Aluminum Conductors-multi-strand construction, of only approved make: Laying rates to include for all required Cable Clamps, Cable Identification Tags at required intervals,& other items like cable ferrules / cable-tags at each end of the cables laid. For the same Cross Sectional area of Cables, laying rates shall be the same whether it is Copper or Aluminum conductor cables, or whether it is XLPE or PVC insulation Similarly, laying rates shall be the same for Armoured & Un-armoured Cables of the same Cross section. Cable trays will be measured separately

End terminations for the below listed PVC cables including supply of brass glands, solder less crimping type copper sockets, etc., complete.

Size of Cable Tray: 250mm x 50mm - 2 mm Thick

Supply and laying of Wiring of submains / circuit mains in concealed / surface conduit system using 2 mm thick rigid PVC with conduit accessories, 1100 V PVC insulated copper flexible wires for phase , neutral and earth with conduit and wiring accessories ,etc. complete for lighting / power points

LT Page 9

4.2Mtr 380.00 100% 380.00 340 129,200.00

4.4Mtr 112.00 100% 112.00 95.5 10,696.00

4.5Mtr 150.00 100% 150.00 94 14,100.00

5.0 POINT WIRING

5.1 Single light points controlled by a 6 A switch (Inc Nos. 515.00 100% 515.00 30 15,450.00 5.2 Two light points controlled by a 6 A switch ( Incl Nos. 755.00 100% 755.00 20 15,100.00 5.3

Nos. 815.00 100% 815.00 5 4,075.00 5.13 ELEVATOR SHAFT LIGHTING

comprising of : -

b. 6A 3 Pin switched socket outlet - 3 sets

wire for lighting circuit : 3 runs of 2.5 sq.mmwire for power circuit : 3 runs of 4.0 sq.mm

Nos 28,900.00 100% 28,900.00 4 115,600.00 6.0 POWER RECEPTACLES

4R x 6Sqmm + 2R x 2.5Sqmm Cu. Wire in 32mm dia Conduit2 x 2.5 sq.mm + 1 x 1.5 sqmm. Copper wires in 19 mm dia conduit

2 x 4 sq.mm + 1 x 2.5 sqmm. Copper wires in 25 mm dia conduit

Supply and wiring with conduit for lights, ceiling fans, exhaust fan and 6A socket outlets using 1.5 Sq.mm. Stranded copper, 660 V grade, FRLS PVC insulated wires drawn through 2 mm, thick PVC conduit in concealed / surface installation using necessary conduit accessories, junction boxes, GI switch outlet boxes, switch plates, bends, collars,clamps,ceiling roses, 6A/16A switches, fan regulators, regulator boxes, etc., shall be Modular type flush mounted on the surface of wall . The rate for point wiring shall include the wiring from first light / fan/ control switches upto light point and then looping between switches / lights / fans 6 A sockets, etc.

Single light point controlled by a 6 A two way switch ( Including switch)(Ref: Internal Elect. Work Order.2.2.6)

a. Type Philips NXC 101 Bulk head light fixture with 100 W GLS lamp - 3 Nos

c. Wiring for 3 light points controlled by a 10A MCB.

d. Wiring for pit light using 2 Nos 6 A 2 way switches.

e. Wiring for 3 sets of 5 A switched & socket outlets.

Conduit: 25 mm dia M.S. Conduit.(Total 4 times the above quantity)

LT Page 10

6.1 Nos 380.00 100% 380.00 6 2,280.00

6.2 Nos. 650.00 100% 650.00 -

6.5 Nos. 1125 100% 1,125.00 4 4,500.00 7

7.1.2 25 mm dia for telephone & Data RM 49.00 100% 49.00 348 17,052.00 7.2 TELEPHONE

7.2.1

Rmts. 26.00 100% 26.00 376.2 9,781.20 7.3 TV

7.3.1

b. RG 6-COMMSCOPE make rmts 32.00 100% 32.00 175.6 5,619.20

8 EARTH ELECTRODES/EARTH STRIPS8.1

Nos 3,750.00 100% 3,750.00 7 26,250.00 8.3 25 x 3 mm GI Earth flat

Supply and Laying Mtr 118.00 100% 118.00 243.6 28,744.80 9.0 LIGHT FIXTURES

External Lighting./ Common Area Lighting Installation Only

9.2 Gate Light Fixture 1X70WInstallation. Nos 175.00 100% 175.00 4 700.00

9.4

Installation. Nos 95.00 100% 95.00 16 1,520.00 9.5 2 x 36W Ceiling mounted FTL Light Fitting

Installation. Nos 165.00 100% 165.00 4 660.00

Supply and installation of 6A, 5pin, combination type shuttered switched socket outlet and G.I outlet box and moulded plastic cover plate as required including termination of wires. (Dependent)

Supply and installation of 6A, 5pin, combination type shuttered switched socket outlet with indicator lamp and G.I outlet box and moulded plastic cover plate as required including termination of wires.(Independent)

Ceiling fan point controlled by a switch & Electronic regulator with fan box in ceilingSupply and laying of heavy guage rigid PVC conduit with all conduit accessories MS junction/pull boxes, GI fish wire, fixing accessories ,etc. as required. The rate shall include the chasing of walls/ floors and plastering the chased portion as required for telephone/TV

Wiring for telephone outlets with two pair 0.5 mm dia tinned copper,flexible telephone wires in existing conduit.(Tentative quantity)

Supply and laying of following type of TV coaxial cables in 25 mm dia existing conduit.

Supply and Installation of Pipe electrode earth station as per IS 3043 with 38mm dia Class B' G.I pipe, GI watering funnel set with salt, charcoal, 300mm x 300mm chamber cover etc., complete.

1 x 36W Wall /Ceiling mounted FTL Light Fitting

LT Page 11

9.7

SupplyInstallation. Nos 95.00 100% 95.00 2 190.00

9.8 LED Light FixtureSupplyInstallation. Nos 95.00 100% 95.00 8 760.00

11 LIGHTNING ARRESTOR

11.2 Set 5,000.00 100% 5,000.00 1 5,000.00 12.2 AS BUILT DRAWINGS

LS 38,000 100% 38,000.00 1 38,000.00

TOTAL 1,609,471.20

NON TENDER ITEMS1

Nos 750.00 100% 750.00 1 750.00 2

RM 330.00 100% 330.00 21 6,930.00 3

RM 685.00 100% 685.00 56 38,360.00 4

32MM Dia PVC Conduit for Telephone Cable RM 86.00 100% 86.00 18 1,548.00 5

75MM Dia PVC Conduit for Telephone Cable RM 265.00 100% 265.00 0 - 6

Mtr 265.00 100% 265.00 27 7,155.00

7

Each 7500 100% 7,500.00 1 7,500.00 8

Rmt 72.00 100% 72.00 300 21,600.00

1 x 35W Ceiling mounted CFL Light (Doom light)

Provision of Test Links (at a height of 2000 mm from ground level) made out of Galvanised Iron. Each conductor will be of sufficient length to extend 1/2 " beyond the test clamp. Contact surfaces shall be tinned.

Preparation and Submission of as built drawings (hard & soft copy). Schematic distribution diagram, electrical layouts, earthing detail and other related drawings. 3 sets of hard copies and soft copy in a CD.

Call bell point controlled by a 6 A bell push. ( without call bell)(Ref: Krishvi Dhavala Low Rise Work Order)

4 of 4.0 sq.mm. PVC insulated copper wires and 1 of 2.5 sq.mm PVC insulated copper earth wire (Wincap) for power main circuits.(Ref: Krishvi D. Low Rise WO)

4 of 10.0 sq.mm. PVC insulated copper wires and 1 of 4 sq.mm PVC insulated copper earth wire for power main circuits.(Ref: Krishvi D. Low Rise W.O.)

4 core x 2.5sq mm, copper, L.T.UG control cable (Ref: Krishvi Gavakshi W.O. No.12m)

Supply and fixing of 8 way Double door SPN D.B with 16 A 300mA 4pole RCBO For Car Lift with necessary fixing accessories and terminations.(Ref: Dhavala Low rise)

Supply and laying of 2runs of 1.5 (for phase and nuetral) PVC insulated copper wires run in 19mm dia PVC conduit.(for Point circuit)(Ref: Rate approved in Krishvi Gavakshi Bills)

LT Page 12

9

Each 45.00 100% 45.00 2 90.00 10

Each 455.00 100% 455.00 1 455.00 11

Each 405.00 100% 405.00 1 405.00 12

Each 430.00 100% 430.00 20 8,600.00 13

Each 450.00 100% 450.00 3 1,350.00 14

Each 250.00 100% 250.00 1 250.00 15

Sq In 2.5 100% 2.50 9842 24,605.00 16

Ls 1,500.00 100% 1,500.00 1 1,500.00 TOTAL 121,098.00

Supply and fixing of Modular blank switch with necessary accessories.(Ref: Rate approved in Krishvi Gavakshi Bills)

Supplying and fixing suitable size M.S. box with 1 No. 20A DP modular switch with indicator, moulded plastic plate etc.,Geyser control and AC controls. (Ref: Krishvi Dhavala Low Rise Ext Work Order)

Supplying and fixing suitable size M.S. box with 1 No. 16A 3-pin socket moulded plastic plate etc., for Geyser outlets and AC outlets. (Ref: Krishvi Dhavala Low Rise Ext Work Order)

End Terminations for 3phase x 6sqmm circuit for Flat D.B's & other circuits. (Ref: Krishvi Dhavala Low Rise Ext Work Order,10k)

Fixing and testing of Motor Starters with necessary fixing accessories.

Supply and fixing of Calling Bell with necessary fixing accessories.

Supply and fixing of 16 x 6 M.S. Wire Push box (16 Guage) with plate and other fixing accessories.

Alteration works of removing and refixing of Switch plates and boxes with necessary alteration works carried out.