DQD 507 Rev. 2012-05-22 Page 1

Certificate of Compliance Certificate: 70025997 Master Contract: 170351

Project: 70046788 Date Issued: 2015-09-16

Issued to: Bel Fuse Inc.

206 Van Vorst St

Jersey City, New Jersey 07302

USA

Attention: Editha S. Vergara

The products listed below are eligible to bear the CSA Mark shown

with adjacent indicators 'C' and 'US' for Canada and US or with adjacent

indicator 'US' for US only or without either indicator for Canada only.

Issued by: Maggie Lam

Maggie Lam

PRODUCTS

CLASS - 531111 - POWER SUPPLIES-Component Type (CSA 60950-1-07-2nd Ed)

CLASS - 531191 - POWER SUPPLIES-Component Type (UL 60950-1-2nd Ed)Certified to U.S.Stds

AC/DC Switching Power Supply, Models PET800-12-074NA and PET800-12-074RA; Input: 100-240 V ac, 9.5-

4.2 A, 50/60 Hz; Output: V1: 12 V dc/65 A, V2: 12 Vsb /2 A; Classification Level 6.

Model name may be followed by alpha numeric characters indicating non-safety critical options.

APPLICABLE REQUIREMENTS

CAN/CSA-C22.2 No 60950-1-

07, +Am.1:2011 +Am.2:2014 Information Technology Equipment - Safety - Part 1: General

Requirements

ANSI/UL 60950-1-2014 Information Technology Equipment - Safety - Part 1: General

Requirements

Certificate: 70025997

Project: 70046788

Master Contract: 170351

Date Issued: 2015-09-16

DQD 507 Rev. 2012-05-22 Page 2

CONDITIONS OF ACCEPTABILITY

1. Equipment shall be installed only by trained service personnel, according to the manufacturer installation

instructions.

2. Evaluated for use in a Pollution Degree 2 environment.

3. Temperature tests shall be considered for specific installation conditions in the end system.

4. Evaluated as Class I (earthed equipment). Reliable connection to Protective Earth shall be provided in the

end use installation.

5. Evaluated for connection to AC power with a branch circuit protector rated max 20 A.

6. The appliance inlet for the detachable power supply cord is considered the main disconnect device.

7. Spacings were evaluated for an operating altitude of max 5000 m, based on IEC-60664-1 altitude

correction factors.

8. Suitability of the enclosure provided with the equipment as a FIRE, MECHANICAL and ELECTRICAL

enclosure is to be determined in the end system. Front bezel was evaluated and complies with electrical

and mechanical requirements.

9. The Output circuits are SELV; Output V1 operates at hazardous energy levels (> 240 VA).

10. Limited Short circuit test was conducted on the GND trace from AC Inlet GND pin to chassis mounting

pad.

DQD 507 Rev. 2012-05-22 Page 1

Supplement to Certificate of Compliance

Certificate: 70025997 Master Contract: 170351

The products listed, including the latest revision described below,

are eligible to be marked in accordance with the referenced Certificate.

Product Certification History

Project Date Description

70046788 2015-09-16 Update report 70025997 to include model PET800-12-074RA.

70025997 2015-03-12 AC/DC Switching Power Supply, Model PET800-12-074NA. (C/US)

(Transferred from 173688-2729063 and upgraded to include Am2)

CERTIFICATENo. P15220414

Order No. 294983 Page 1/2

Date of issue 02-11-2015

Eunhye SongCertification Department

Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com

Product AC-DC switching power supply

Applicant Bel Fuse Inc.206 Van Vorst St.Jersey City, NJ 07302USA

Manufacturer Bel Fuse Inc.206 Van Vorst St.Jersey City, NJ 07302USA

Factory See page 2

Ratings Input: 9.5-4.2A, 100-240V~, 50/60Hz Output: V1: 65 A, 12 Vdc, 780 W ; V2: 2 A, 12V (stand by), 24 W ; 800 W

Trade mark

Model / Type Ref. PET800-12-074NA, PET800-12-074RA

Principal characteristics Cl. lThe model name may be followed by alpha numeric characters indicating non-safety critical options

See next page(s)

A sample of the product was testedand found to be in conformity with

OFF EN 60950-1:2006;A11;A1;A12;A2

Validity This certificate documents conformity with the standards shown, and also applies as license foruse of Nemkos name and certification mark. The certificate and license is valid as long as theapplicable conditions are complied with, and provided that any changes to the product are notifiedto Nemko for acceptance prior to implementation.New standards or amendments to the standards may imply that the product design must beupdated and/or that re-testing and re-certification is necessary.

Additional information See next page(s)

The abovementioned certified equipment complies with current regulatory requirements regardingelectrical safety in Norway and other EU/EEA member states, as far as this can be checked.Compliance with requirements regarding building-in, protection against electric shock andElectromagnetic Compatibility (EMC) must be checked when the equipment is built-in a completedproduct or forms a part of a complete system.

Additional model(s) See next page(s)

CERTIFICATENo. P15220414

Order No. 294983 Page 2/2

Date of issue 02-11-2015

Eunhye SongCertification Department

Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL info@nemko.comENTERPRISE NUMBER NO974404532 nemko.com

Factories:

BPS Asia Pacific Electronics (Shenzhen) Co., Ltd.Building# 6, Nanming Road, Gongming Town HuahongXintong Industrial Park, Guangming DistrictShenzhenChina 518108

Bel Power Solutions, s.r.o.Areal ZTS 92401841 Dubnica nad VahomSlovakia

Ref. Certif. No.

NO89136

Gaustadalléen 30NO-0373 Oslo, Norway

Date: 02-11-2015 Signature: Eunhye SongCertification Department

Issued 2007-04 1/2

IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICALEQUIPMENT (IECEE) CB SCHEME

SYSTEME CEI DACCEPTATION MUTUELLE DE CERTIFICATS DESSAIS DESEQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC

CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC

ProductProduit AC-DC switching power supply

Name and address of the applicantNom et adresse du demandeur

Bel Fuse Inc.206 Van Vorst St.Jersey City, NJ 07302USA

Name and address of the manufacturerNom et adresse du fabricant

Bel Fuse Inc.206 Van Vorst St.Jersey City, NJ 07302USA

Name and address of the factoryNom et adresse de l'usineNote: When more than one factory, please report on page 2Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page

Additional information on page 2

Ratings and principal characteristicsValeurs nominales et caractéristiques principales

Input: 9.5-4.2A, 100-240V~, 50/60HzOutput: V1: 65 A, 12 Vdc, 780 W ; V2: 2 A, 12V (stand by), 24 W ;800 WCl. l

Trademark (if any)Marque de fabrique (si elle existe)

Type of Manufacturer’s Testing Laboratories usedType de programme du laboratoire d’essais constructeur

WMT

Model / Type Ref.Ref. De type

PET800-12-074NA, PET800-12-074RA

Additional information (if necessary may also bereported on page 2)Les informations complémentaires (si nécessaire,peuvent être indiqués sur la deuxième page

The model name may be followed by alpha numeric characters indicatingnon-safety critical options

Additional information on page 2

A sample of the product was tested and foundto be in conformity withUn échantillon de ce produit a été essayé et a étéconsidéré conforme à la

IEC 60950-1(ed.2);am1;am2

As shown in the Test Report Ref. No. which forms partof this CertificateComme indiqué dans le Rapport dessais numéro deréférence qui constitue partie de ce Certificat

294983

This CB Test Certificate is issued by the National Certification BodyCe Certificat dessai OC est établi par l'Organisme National de Certification

Ref. Certif. No.

NO89136

Gaustadalléen 30NO-0373 Oslo, Norway

Date: 02-11-2015 Signature: Eunhye SongCertification Department

Issued 2007-04 2/2

BPS Asia Pacific Electronics (Shenzhen) Co., Ltd.Building# 6, Nanming Road, Gongming Town HuahongXintong Industrial Park, Guangming DistrictShenzhenChina 518108

Bel Power Solutions, s.r.o.Areal ZTS 92401841 Dubnica nad VahomSlovakia