certificate of approval no cf 845 - warrington · pdf filecertificate no cf 845 jotun a/s page...
TRANSCRIPT
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
Signed and sealed for and on behalf of CERTIFIRE
Sir Ken Knight Paul Duggan Chairman Certification Manager
WCL Impartiality Committee Warrington Certification Ltd
CERTIFICATE OF APPROVAL No CF 845
This is to certify that, in accordance with
TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of
1
Page 1 of 18
JOTUN A/S
PO Box 2021, N -3202 Sandefjord, Norway Tel: 0047 334 5700 Fax: 0047 334 57242
Website: http://www.jotun.com
Have been assessed against the requirements of the Technical Schedule(s) denoted below and are approved for use subject to the conditions
appended hereto: _____________________________________________________________________________________________________
CERTIFIED PRODUCT TECHNICAL SCHEDULE
Steelmaster 120SB TS15 Intumescent Coatings for Steelwork
Issued: 28th March 2011
Reissued: 30th March 2016
Valid to: 29th March 2021
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 2 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
Steelmaster 120SB 1. This approval relates to the use of Steelmaster 120SB for the fire protection of
I-shaped steel sections and hollow columns. The precise scope is given in Tables 1 to 16 which show the total dry film thickness of Steelmaster 120SB (excluding primer and top sealer) required to provide fire resistance periods in accordance with BS476: Part 21: 1987 of 30 minutes up to 120 minutes for differing sections and section factors.
2. This certification is designed to demonstrate compliance of the product or system
specifically with Approved Document B (England and Wales), Section 2 of the Technical Standards (Scotland), Technical Booklet E (N. Ireland). If compliance is required to other regulatory or guidance documents there may be additional considerations or conflict to be taken into account.’
3. The products are approved on the basis of:
i) Initial type testing. ii) A design appraisal against TS15.
iii) Certification of quality management system to ISO 9001: 2008. iv) Inspection and surveillance of factory production control v) Audit testing
4. The data referring to three-sided fire exposure of beams relate to beams supporting
concrete floor slabs. Separate consideration is required where this is not the case. 5. The data shown is applicable to steel sections blast cleaned to ISO 8501-1 SA2
1/2 or
equivalent and primed with a suitable and compatible primer. Specifications of surface preparations, primers and top sealers is available from Steelmaster 120SB whose responsibility is to ensure that Steelmaster 120SB is compatible for use in respect of both ambient and fire conditions. The total dry film thickness of primer and top sealer together should not exceed that tested.
6. Specific data given in the tables applies to horizontal, vertical, flexural and compression
members supporting loads up to the maximum design loads specified in BS449: Part 2. These are as follows: I-sections beams at a temperature of 620
oC
I-sections columns at a temperature of 550oC
Rectangular and circular hollow columns at a temperature of 520oC
7. The approval relates to on going production. Product and/or its immediate packaging is
identified with the manufacturers’ name, the product name or number, the CERTIFIRE name or name and mark, together with the CERTIFIRE certificate number and application where appropriate.
8. The data shown in the tables is based on an assessment that complies with the criteria for acceptability now incorporated within the CERTIFIRE scheme.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 3 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 550oC 600oC 620oC 650oC 700oC
30 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
35 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
40 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
45 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
50 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
55 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
60 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
65 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
70 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
75 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
80 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
85 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
90 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
95 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
100 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
105 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
110 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
115 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
120 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
125 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
130 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
135 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
140 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
145 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
150 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
155 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
160 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
165 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
170 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
175 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
180 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
185 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
190 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
195 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
200 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
205 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
210 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
215 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
220 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
225 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
230 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
235 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
240 0.960 0.942 0.942 0.942 0.942 0.942 0.942 0.942
245 0.989 0.942 0.942 0.942 0.942 0.942 0.942 0.942
250 1.017 0.942 0.942 0.942 0.942 0.942 0.942 0.942
255 1.046 0.942 0.942 0.942 0.942 0.942 0.942 0.942
260 1.074 0.942 0.942 0.942 0.942 0.942 0.942 0.942
265 1.102 0.942 0.942 0.942 0.942 0.942 0.942 0.942
270 1.131 0.942 0.942 0.942 0.942 0.942 0.942 0.942
275 1.159 0.942 0.942 0.942 0.942 0.942 0.942 0.942
280 1.187 0.942 0.942 0.942 0.942 0.942 0.942 0.942
285 1.216 0.942 0.942 0.942 0.942 0.942 0.942 0.942
290 1.244 0.942 0.942 0.942 0.942 0.942 0.942 0.942
295 1.272 0.942 0.942 0.942 0.942 0.942 0.942 0.942
300 1.301 0.942 0.942 0.942 0.942 0.942 0.942 0.942
305 1.329 0.942 0.942 0.942 0.942 0.942 0.942 0.942
310 1.358 0.942 0.942 0.942 0.942 0.942 0.942 0.942
315 1.386 0.949 0.942 0.942 0.942 0.942 0.942 0.942
320 1.414 0.977 0.942 0.942 0.942 0.942 0.942 0.942
325 1.443 1.004 0.942 0.942 0.942 0.942 0.942 0.942
330 1.471 1.032 0.942 0.942 0.942 0.942 0.942 0.942
Section
Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
I-Section Beams: 30 minutes
Steelmaster 120SB Table 1
Thickness is intumescent only. Beams with concrete slabs.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 4 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 550oC 600oC 620oC 650oC 700oC
30 0.942 0.942 0.942 0.942 0.942 0.942 0.942 0.942
35 0.925 0.942 0.942 0.942 0.942 0.942 0.942 0.942
40 0.978 0.942 0.942 0.942 0.942 0.942 0.942 0.942
45 1.031 0.942 0.942 0.942 0.942 0.942 0.942 0.942
50 1.085 0.942 0.942 0.942 0.942 0.942 0.942 0.942
55 1.138 0.942 0.942 0.942 0.942 0.942 0.942 0.942
60 1.191 0.957 0.942 0.942 0.942 0.942 0.942 0.942
65 1.244 1.008 0.942 0.942 0.942 0.942 0.942 0.942
70 1.297 1.058 0.942 0.942 0.942 0.942 0.942 0.942
75 1.351 1.109 0.942 0.942 0.942 0.942 0.942 0.942
80 1.404 1.159 0.942 0.942 0.942 0.942 0.942 0.942
85 1.457 1.209 0.942 0.942 0.942 0.942 0.942 0.942
90 1.510 1.260 0.962 0.942 0.942 0.942 0.942 0.942
95 1.563 1.310 1.011 0.942 0.942 0.942 0.942 0.942
100 1.616 1.361 1.060 0.942 0.942 0.942 0.942 0.942
105 1.670 1.411 1.110 0.942 0.942 0.942 0.942 0.942
110 1.723 1.461 1.159 0.942 0.942 0.942 0.942 0.942
115 1.776 1.512 1.208 0.942 0.942 0.942 0.942 0.942
120 1.829 1.562 1.258 0.942 0.942 0.942 0.942 0.942
125 1.882 1.613 1.307 0.942 0.942 0.942 0.942 0.942
130 1.936 1.663 1.356 0.942 0.942 0.942 0.942 0.942
135 1.989 1.713 1.406 0.981 0.942 0.942 0.942 0.942
140 2.042 1.764 1.455 1.034 0.942 0.942 0.942 0.942
145 2.095 1.814 1.504 1.086 0.942 0.942 0.942 0.942
150 2.148 1.865 1.554 1.138 0.942 0.942 0.942 0.942
155 2.202 1.915 1.603 1.190 0.942 0.942 0.942 0.942
160 2.255 1.965 1.652 1.243 0.942 0.942 0.942 0.942
165 2.308 2.016 1.701 1.295 0.942 0.942 0.942 0.942
170 2.361 2.066 1.751 1.347 0.942 0.942 0.942 0.942
175 2.414 2.117 1.800 1.399 0.942 0.942 0.942 0.942
180 2.468 2.167 1.849 1.451 0.942 0.942 0.942 0.942
185 2.521 2.217 1.899 1.504 0.942 0.942 0.942 0.942
190 2.574 2.268 1.948 1.556 0.942 0.942 0.942 0.942
195 2.627 2.318 1.997 1.608 0.942 0.942 0.942 0.942
200 2.680 2.368 2.047 1.660 0.942 0.942 0.942 0.942
205 2.734 2.419 2.096 1.713 0.979 0.942 0.942 0.942
210 2.787 2.469 2.145 1.765 1.039 0.942 0.942 0.942
215 2.840 2.520 2.195 1.817 1.099 0.976 0.942 0.942
220 2.893 2.570 2.244 1.869 1.159 1.033 0.942 0.942
225 2.946 2.620 2.293 1.922 1.219 1.090 0.961 0.942
230 3.000 2.671 2.343 1.974 1.279 1.148 1.016 0.942
235 3.053 2.721 2.392 2.026 1.339 1.205 1.071 0.942
240 3.106 2.772 2.441 2.078 1.398 1.262 1.126 0.942
245 3.159 2.822 2.490 2.130 1.458 1.319 1.181 0.942
250 3.212 2.872 2.540 2.183 1.518 1.376 1.236 0.942
255 3.266 2.923 2.589 2.235 1.578 1.433 1.291 0.982
260 3.319 2.973 2.638 2.287 1.638 1.491 1.346 1.034
265 3.372 3.024 2.688 2.339 1.698 1.548 1.401 1.086
270 3.425 3.074 2.737 2.392 1.757 1.605 1.456 1.138
275 3.478 3.124 2.786 2.444 1.817 1.662 1.511 1.190
280 3.531 3.175 2.836 2.496 1.877 1.719 1.566 1.242
285 3.585 3.225 2.885 2.548 1.937 1.776 1.621 1.294
290 3.638 3.276 2.934 2.600 1.997 1.834 1.676 1.346
295 3.691 3.326 2.984 2.653 2.057 1.891 1.731 1.398
300 3.744 3.376 3.033 2.705 2.117 1.948 1.786 1.450
305 3.427 3.082 2.757 2.176 2.005 1.841 1.502
310 3.477 3.132 2.809 2.236 2.062 1.896 1.554
315 3.528 3.181 2.862 2.296 2.119 1.951 1.606
320 3.578 3.230 2.914 2.356 2.177 2.006 1.658
325 3.628 3.279 2.966 2.416 2.234 2.061 1.710
330 3.679 3.329 3.018 2.476 2.291 2.116 1.762
I-Section Beams: 60 minutes
Section
Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 2
Thickness is intumescent only. Beams with concrete slabs.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 5 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 550oC 600oC 620oC 650oC 700oC
30 1.159 1.065 0.958 0.942 0.942 0.942 0.942 0.942
35 1.217 1.124 1.017 0.942 0.942 0.942 0.942 0.942
40 1.275 1.182 1.076 0.942 0.942 0.942 0.942 0.942
45 1.333 1.241 1.135 1.000 0.942 0.942 0.942 0.942
50 1.391 1.300 1.195 1.061 0.942 0.942 0.942 0.942
55 1.449 1.358 1.254 1.122 0.962 0.942 0.942 0.942
60 1.507 1.417 1.313 1.183 1.024 0.944 0.942 0.942
65 1.565 1.476 1.372 1.245 1.085 1.003 0.942 0.942
70 1.623 1.534 1.431 1.306 1.147 1.063 0.946 0.942
75 1.681 1.593 1.491 1.367 1.208 1.123 1.005 0.942
80 1.739 1.651 1.550 1.428 1.270 1.183 1.064 0.942
85 1.797 1.710 1.609 1.489 1.331 1.243 1.123 0.942
90 1.855 1.769 1.668 1.550 1.392 1.303 1.183 0.942
95 1.913 1.827 1.728 1.611 1.454 1.362 1.242 0.947
100 1.971 1.886 1.787 1.672 1.515 1.422 1.301 1.006
105 2.029 1.945 1.846 1.734 1.577 1.482 1.360 1.065
110 2.087 2.003 1.905 1.795 1.638 1.542 1.420 1.124
115 2.146 2.062 1.964 1.856 1.700 1.602 1.479 1.183
120 2.204 2.120 2.024 1.917 1.761 1.662 1.538 1.241
125 2.262 2.179 2.083 1.978 1.823 1.722 1.597 1.300
130 2.320 2.238 2.142 2.039 1.884 1.781 1.657 1.359
135 2.378 2.296 2.201 2.100 1.945 1.841 1.716 1.418
140 2.436 2.355 2.261 2.161 2.007 1.901 1.775 1.477
145 2.494 2.414 2.320 2.222 2.068 1.961 1.834 1.536
150 2.552 2.472 2.379 2.284 2.130 2.021 1.893 1.595
155 2.610 2.531 2.438 2.345 2.191 2.081 1.953 1.654
160 2.668 2.589 2.498 2.406 2.253 2.140 2.012 1.713
165 2.726 2.648 2.557 2.467 2.314 2.200 2.071 1.772
170 2.784 2.707 2.616 2.528 2.376 2.260 2.130 1.831
175 2.842 2.765 2.675 2.589 2.437 2.320 2.190 1.890
180 2.900 2.824 2.734 2.650 2.498 2.380 2.249 1.949
185 2.958 2.883 2.794 2.711 2.560 2.440 2.308 2.007
190 3.016 2.941 2.853 2.772 2.621 2.500 2.367 2.066
195 3.074 3.000 2.912 2.834 2.683 2.559 2.426 2.125
200 3.132 3.058 2.971 2.895 2.744 2.619 2.486 2.184
205 3.190 3.117 3.031 2.956 2.806 2.679 2.545 2.243
210 3.248 3.176 3.090 3.017 2.867 2.739 2.604 2.302
215 3.306 3.234 3.149 3.078 2.929 2.799 2.663 2.361
220 3.364 3.293 3.208 3.139 2.990 2.859 2.723 2.420
225 3.422 3.351 3.267 3.200 3.051 2.918 2.782 2.479
230 3.480 3.410 3.327 3.261 3.113 2.978 2.841 2.538
235 3.538 3.469 3.386 3.323 3.174 3.038 2.900 2.597
240 3.596 3.527 3.445 3.384 3.236 3.098 2.959 2.656
245 3.654 3.586 3.504 3.445 3.297 3.158 3.019 2.715
250 3.712 3.645 3.564 3.506 3.359 3.218 3.078 2.773
255 3.703 3.623 3.567 3.420 3.277 3.137 2.832
260 3.682 3.628 3.482 3.337 3.196 2.891
265 3.741 3.689 3.543 3.397 3.256 2.950
270 3.750 3.604 3.457 3.315 3.009
275 3.666 3.517 3.374 3.068
280 3.727 3.577 3.433 3.127
285 3.637 3.493 3.186
290 3.696 3.552 3.245
295 3.756 3.611 3.304
300 3.670 3.363
305 3.729 3.422
310 3.481
315 3.539
320 3.598
325 3.657
330 3.716
I-Section Beams: 90 minutes
Section
Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 3
Thickness is intumescent only. Beams with concrete slabs.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 6 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 550oC 600oC 620oC 650oC 700oC
30 1.159 1.159 1.159 0.974 0.942 0.942
35 1.159 1.159 1.035 0.972 0.942
40 1.159 1.097 1.034 0.942
45 1.196 1.159 1.097 0.954
50 1.258 1.221 1.159 1.018
55 1.320 1.283 1.221 1.082
60 1.383 1.344 1.284 1.146
65 1.445 1.406 1.346 1.210
70 1.507 1.468 1.409 1.275
75 1.569 1.530 1.471 1.339
80 1.631 1.591 1.534 1.403
85 1.693 1.653 1.596 1.467
90 1.755 1.715 1.659 1.531
95 1.817 1.777 1.721 1.595
100 1.879 1.839 1.783 1.660
105 1.942 1.900 1.846 1.724
110 2.004 1.962 1.908 1.788
115 2.066 2.024 1.971 1.852
120 2.128 2.086 2.033 1.916
125 2.190 2.147 2.096 1.981
130 2.252 2.209 2.158 2.045
135 2.314 2.271 2.221 2.109
140 2.376 2.333 2.283 2.173
145 2.438 2.394 2.345 2.237
150 2.501 2.456 2.408 2.302
155 2.563 2.518 2.470 2.366
160 2.625 2.580 2.533 2.430
165 2.687 2.642 2.595 2.494
170 2.749 2.703 2.658 2.558
175 2.811 2.765 2.720 2.623
180 2.873 2.827 2.783 2.687
185 2.935 2.889 2.845 2.751
190 2.997 2.950 2.907 2.815
195 3.060 3.012 2.970 2.879
200 3.122 3.074 3.032 2.943
205 3.184 3.136 3.095 3.008
210 3.246 3.198 3.157 3.072
215 3.308 3.259 3.220 3.136
220 3.370 3.321 3.282 3.200
225 3.432 3.383 3.345 3.264
230 3.494 3.445 3.407 3.329
235 3.556 3.506 3.469 3.393
240 3.618 3.568 3.532 3.457
245 3.681 3.630 3.594 3.521
250 3.743 3.692 3.657 3.585
255 3.754 3.719 3.650
260 3.714
I-Section Beams: 120 minutes
Section
Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 4
Thickness is intumescent only. Beams with concrete slabs.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 7 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 550oC 600oC 650oC 700oC
30 0.942 0.942 0.942 0.942 0.942 0.942 0.942
35 0.942 0.942 0.942 0.942 0.942 0.942 0.942
40 0.942 0.942 0.942 0.942 0.942 0.942 0.942
45 0.942 0.942 0.942 0.942 0.942 0.942 0.942
50 0.942 0.942 0.942 0.942 0.942 0.942 0.942
55 0.942 0.942 0.942 0.942 0.942 0.942 0.942
60 0.942 0.942 0.942 0.942 0.942 0.942 0.942
65 0.942 0.942 0.942 0.942 0.942 0.942 0.942
70 0.942 0.942 0.942 0.942 0.942 0.942 0.942
75 0.942 0.942 0.942 0.942 0.942 0.942 0.942
80 0.942 0.942 0.942 0.942 0.942 0.942 0.942
85 0.942 0.942 0.942 0.942 0.942 0.942 0.942
90 0.942 0.942 0.942 0.942 0.942 0.942 0.942
95 0.942 0.942 0.942 0.942 0.942 0.942 0.942
100 0.942 0.942 0.942 0.942 0.942 0.942 0.942
105 0.942 0.942 0.942 0.942 0.942 0.942 0.942
110 0.942 0.942 0.942 0.942 0.942 0.942 0.942
115 0.942 0.942 0.942 0.942 0.942 0.942 0.942
120 0.942 0.942 0.942 0.942 0.942 0.942 0.942
125 0.942 0.942 0.942 0.942 0.942 0.942 0.942
130 0.942 0.942 0.942 0.942 0.942 0.942 0.942
135 0.942 0.942 0.942 0.942 0.942 0.942 0.942
140 0.942 0.942 0.942 0.942 0.942 0.942 0.942
145 0.942 0.942 0.942 0.942 0.942 0.942 0.942
150 0.942 0.942 0.942 0.942 0.942 0.942 0.942
155 0.942 0.942 0.942 0.942 0.942 0.942 0.942
160 0.942 0.942 0.942 0.942 0.942 0.942 0.942
165 0.942 0.942 0.942 0.942 0.942 0.942 0.942
170 0.942 0.942 0.942 0.942 0.942 0.942 0.942
175 0.942 0.942 0.942 0.942 0.942 0.942 0.942
180 0.942 0.942 0.942 0.942 0.942 0.942 0.942
185 0.942 0.942 0.942 0.942 0.942 0.942 0.942
190 0.942 0.942 0.942 0.942 0.942 0.942 0.942
195 0.942 0.942 0.942 0.942 0.942 0.942 0.942
200 0.942 0.942 0.942 0.942 0.942 0.942 0.942
205 0.942 0.942 0.942 0.942 0.942 0.942 0.942
210 0.942 0.942 0.942 0.942 0.942 0.942 0.942
215 0.942 0.942 0.942 0.942 0.942 0.942 0.942
220 0.942 0.942 0.942 0.942 0.942 0.942 0.942
225 0.942 0.942 0.942 0.942 0.942 0.942 0.942
230 0.942 0.942 0.942 0.942 0.942 0.942 0.942
235 0.942 0.942 0.942 0.942 0.942 0.942 0.942
240 0.942 0.942 0.942 0.942 0.942 0.942 0.942
245 0.942 0.942 0.942 0.942 0.942 0.942 0.942
250 0.942 0.942 0.942 0.942 0.942 0.942 0.942
255 0.942 0.942 0.942 0.942 0.942 0.942 0.942
260 0.942 0.942 0.942 0.942 0.942 0.942 0.942
265 0.942 0.942 0.942 0.942 0.942 0.942 0.942
270 0.942 0.942 0.942 0.942 0.942 0.942 0.942
275 0.942 0.942 0.942 0.942 0.942 0.942 0.942
280 0.942 0.942 0.942 0.942 0.942 0.942 0.942
285 0.942 0.942 0.942 0.942 0.942 0.942 0.942
290 0.942 0.942 0.942 0.942 0.942 0.942 0.942
295 0.942 0.942 0.942 0.942 0.942 0.942 0.942
300 0.942 0.942 0.942 0.942 0.942 0.942 0.942
305 0.942 0.942 0.942 0.942 0.942 0.942 0.942
310 0.942 0.942 0.942 0.942 0.942 0.942 0.942
315 0.942 0.942 0.942 0.942 0.942 0.942 0.942
320 0.942 0.942 0.942 0.942 0.942 0.942 0.942
325 0.942 0.942 0.942 0.942 0.942 0.942 0.942
330 0.942 0.942 0.942 0.942 0.942 0.942 0.942
Section
Factor up
to m-1
I-Section Columns: 30 minutes
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 5
Thickness is intumescent only. Table also applies to 4-sided I-section beams.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 8 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 550oC 600oC 650oC 700oC
30 0.942 0.942 0.942 0.942 0.942 0.942 0.942
35 0.942 0.942 0.942 0.942 0.942 0.942 0.942
40 0.985 0.942 0.942 0.942 0.942 0.942 0.942
45 1.045 0.942 0.942 0.942 0.942 0.942 0.942
50 1.104 0.942 0.942 0.942 0.942 0.942 0.942
55 1.163 0.942 0.942 0.942 0.942 0.942 0.942
60 1.223 0.971 0.942 0.942 0.942 0.942 0.942
65 1.282 1.031 0.942 0.942 0.942 0.942 0.942
70 1.342 1.091 0.942 0.942 0.942 0.942 0.942
75 1.401 1.151 0.942 0.942 0.942 0.942 0.942
80 1.460 1.211 0.942 0.942 0.942 0.942 0.942
85 1.520 1.271 0.951 0.942 0.942 0.942 0.942
90 1.579 1.331 1.013 0.942 0.942 0.942 0.942
95 1.639 1.391 1.075 0.942 0.942 0.942 0.942
100 1.698 1.451 1.137 0.942 0.942 0.942 0.942
105 1.757 1.511 1.199 0.942 0.942 0.942 0.942
110 1.817 1.570 1.260 0.942 0.942 0.942 0.942
115 1.876 1.630 1.322 0.942 0.942 0.942 0.942
120 1.936 1.690 1.384 0.942 0.942 0.942 0.942
125 1.995 1.750 1.446 0.942 0.942 0.942 0.942
130 2.054 1.810 1.508 0.944 0.942 0.942 0.942
135 2.114 1.870 1.570 1.015 0.942 0.942 0.942
140 2.173 1.930 1.631 1.085 0.942 0.942 0.942
145 2.232 1.990 1.693 1.155 0.942 0.942 0.942
150 2.292 2.050 1.755 1.225 0.942 0.942 0.942
155 2.351 2.110 1.817 1.295 0.942 0.942 0.942
160 2.411 2.170 1.879 1.365 0.942 0.942 0.942
165 2.470 2.229 1.941 1.435 0.942 0.942 0.942
170 2.529 2.289 2.002 1.506 0.942 0.942 0.942
175 2.589 2.349 2.064 1.576 0.942 0.942 0.942
180 2.648 2.409 2.126 1.646 0.942 0.942 0.942
185 2.708 2.469 2.188 1.716 0.942 0.942 0.942
190 2.767 2.529 2.250 1.786 0.942 0.942 0.942
195 2.826 2.589 2.312 1.856 0.981 0.942 0.942
200 2.886 2.649 2.373 1.927 1.069 0.942 0.942
205 2.945 2.709 2.435 1.997 1.158 0.942 0.942
210 3.004 2.769 2.497 2.067 1.246 0.942 0.942
215 3.064 2.829 2.559 2.137 1.335 0.942 0.942
220 3.123 2.889 2.621 2.207 1.423 0.942 0.942
225 3.183 2.948 2.682 2.277 1.512 0.942 0.942
230 3.242 3.008 2.744 2.348 1.600 0.942 0.942
235 3.301 3.068 2.806 2.418 1.689 0.942 0.942
240 3.361 3.128 2.868 2.488 1.777 0.942 0.942
245 3.420 3.188 2.930 2.558 1.866 0.942 0.942
250 3.480 3.248 2.992 2.628 1.954 0.942 0.942
255 3.539 3.308 3.053 2.698 2.043 0.942 0.942
260 3.598 3.368 3.115 2.768 2.131 0.942 0.942
265 3.658 3.428 3.177 2.839 2.220 0.942 0.942
270 3.717 3.488 3.239 2.909 2.308 0.942 0.942
275 3.776 3.548 3.301 2.979 2.397 0.942 0.942
280 3.836 3.607 3.363 3.049 2.485 0.942 0.942
285 3.895 3.667 3.424 3.119 2.574 0.942 0.942
290 3.955 3.727 3.486 3.189 2.662 0.942 0.942
295 4.014 3.787 3.548 3.260 2.751 0.942 0.942
300 4.073 3.847 3.610 3.330 2.839 0.942 0.942
305 3.907 3.672 3.400 2.928 0.942 0.942
310 3.967 3.734 3.470 3.016 0.942 0.942
315 4.027 3.795 3.540 3.105 0.942 0.942
320 4.087 3.857 3.610 3.193 0.942 0.942
325 3.919 3.680 3.282 0.942 0.942
330 3.981 3.751 3.370 0.999 0.942
Section
Factor up
to m-1
I-Section Columns: 60 minutes
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 6
Thickness is intumescent only. Table also applies to 4-sided I-section beams up to a maximum protection thickness of 3.760mm.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 9 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 550oC 600oC 650oC 700oC
30 1.211 1.089 0.954 0.942 0.942 0.942 0.942
35 1.176 1.040 0.942 0.942 0.942 0.942
40 1.263 1.125 0.973 0.942 0.942 0.942
45 1.351 1.211 1.058 0.942 0.942 0.942
50 1.438 1.297 1.143 0.942 0.942 0.942
55 1.525 1.382 1.228 1.025 0.942 0.942
60 1.613 1.468 1.313 1.109 0.942 0.942
65 1.700 1.554 1.398 1.194 0.942 0.942
70 1.788 1.639 1.484 1.279 1.005 0.942
75 1.875 1.725 1.569 1.363 1.091 0.942
80 1.962 1.811 1.654 1.448 1.177 0.942
85 2.050 1.897 1.739 1.533 1.262 0.942
90 2.137 1.982 1.824 1.617 1.348 0.944
95 2.224 2.068 1.909 1.702 1.434 1.033
100 2.312 2.154 1.994 1.786 1.520 1.122
105 2.399 2.239 2.080 1.871 1.605 1.211
110 2.486 2.325 2.165 1.956 1.691 1.300
115 2.574 2.411 2.250 2.040 1.777 1.389
120 2.661 2.496 2.335 2.125 1.862 1.478
125 2.748 2.582 2.420 2.210 1.948 1.567
130 2.836 2.668 2.505 2.294 2.034 1.656
135 2.923 2.754 2.591 2.379 2.119 1.745
140 3.011 2.839 2.676 2.463 2.205 1.835
145 3.098 2.925 2.761 2.548 2.291 1.924
150 3.185 3.011 2.846 2.633 2.376 2.013
155 3.273 3.096 2.931 2.717 2.462 2.102
160 3.360 3.182 3.016 2.802 2.548 2.191
165 3.447 3.268 3.101 2.887 2.634 2.280
170 3.535 3.353 3.187 2.971 2.719 2.369
175 3.622 3.439 3.272 3.056 2.805 2.458
180 3.709 3.525 3.357 3.140 2.891 2.547
185 3.797 3.610 3.442 3.225 2.976 2.636
190 3.884 3.696 3.527 3.310 3.062 2.725
195 3.971 3.782 3.612 3.394 3.148 2.814
200 4.059 3.868 3.698 3.479 3.233 2.904
205 3.953 3.783 3.564 3.319 2.993
210 4.039 3.868 3.648 3.405 3.082
215 3.953 3.733 3.491 3.171
220 4.038 3.817 3.576 3.260
225 3.902 3.662 3.349
230 3.987 3.748 3.438
235 4.071 3.833 3.527
240 3.919 3.616
245 4.005 3.705
250 4.090 3.794
255 3.883
260 3.972
265 4.062
Section
Factor up
to m-1
I-Section Columns: 90 minutes
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB
Table 7 Thickness is intumescent only. Table also applies to 4-sided I-section beams up to a maximum protection thickness of 3.760mm.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 10 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 550oC 600oC 650oC 700oC
30 1.253 1.150 1.033 0.942 0.942
35 1.359 1.251 1.132 0.976 0.942
40 1.465 1.352 1.231 1.074 0.942
45 1.571 1.454 1.330 1.172 0.972
50 1.676 1.555 1.428 1.270 1.072
55 1.782 1.656 1.527 1.368 1.171
60 1.888 1.757 1.626 1.466 1.271
65 1.994 1.858 1.725 1.564 1.370
70 2.100 1.959 1.824 1.662 1.470
75 2.205 2.060 1.923 1.760 1.569
80 2.311 2.161 2.021 1.859 1.669
85 2.417 2.262 2.120 1.957 1.769
90 2.523 2.363 2.219 2.055 1.868
95 2.628 2.464 2.318 2.153 1.968
100 2.734 2.565 2.417 2.251 2.067
105 2.840 2.666 2.516 2.349 2.167
110 2.946 2.767 2.614 2.447 2.266
115 3.052 2.868 2.713 2.545 2.366
120 3.157 2.969 2.812 2.643 2.465
125 3.263 3.070 2.911 2.742 2.565
130 3.369 3.171 3.010 2.840 2.665
135 3.475 3.272 3.109 2.938 2.764
140 3.581 3.373 3.207 3.036 2.864
145 3.686 3.474 3.306 3.134 2.963
150 3.792 3.575 3.405 3.232 3.063
155 3.898 3.676 3.504 3.330 3.162
160 4.004 3.778 3.603 3.428 3.262
165 3.879 3.702 3.527 3.361
170 3.980 3.800 3.625 3.461
175 4.081 3.899 3.723 3.561
180 3.998 3.821 3.660
185 4.097 3.919 3.760
190 4.017 3.859
195 3.959
200 4.058
Section
Factor up
to m-1
I-Section Columns: 120 minutes
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 8
Thickness is intumescent only. Table also applies to 4-sided I-section beams Table also applies to 4-sided I-section beams up to a maximum protection thickness of 3.760mm.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 11 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
35 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
40 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
45 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
50 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
55 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
60 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
65 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
70 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
75 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
80 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
85 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
90 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
95 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
100 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
105 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
110 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
115 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
120 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
125 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
130 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
135 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
140 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
145 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
150 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
155 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
160 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
165 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
170 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
175 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
180 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
185 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
190 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
195 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
200 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
205 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
210 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
215 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
220 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
Rectangular Hollow Columns: 30 minutes
Section
Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB
Table 9 Thickness is intumescent only.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 12 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
35 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
40 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
45 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
50 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
55 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
60 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
65 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
70 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
75 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
80 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
85 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
90 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
95 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
100 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
105 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
110 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
115 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
120 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
125 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
130 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
135 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
140 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
145 3.027 3.007 3.007 3.007 3.007 3.007 3.007 3.007
150 3.143 3.007 3.007 3.007 3.007 3.007 3.007 3.007
155 3.259 3.007 3.007 3.007 3.007 3.007 3.007 3.007
160 3.376 3.007 3.007 3.007 3.007 3.007 3.007 3.007
165 3.492 3.007 3.007 3.007 3.007 3.007 3.007 3.007
170 3.608 3.007 3.007 3.007 3.007 3.007 3.007 3.007
175 3.725 3.007 3.007 3.007 3.007 3.007 3.007 3.007
180 3.841 3.007 3.007 3.007 3.007 3.007 3.007 3.007
185 3.957 3.007 3.007 3.007 3.007 3.007 3.007 3.007
190 4.073 3.007 3.007 3.007 3.007 3.007 3.007 3.007
195 4.190 3.091 3.007 3.007 3.007 3.007 3.007 3.007
200 4.306 3.220 3.007 3.007 3.007 3.007 3.007 3.007
205 4.422 3.348 3.007 3.007 3.007 3.007 3.007 3.007
210 4.539 3.476 3.007 3.007 3.007 3.007 3.007 3.007
215 4.655 3.604 3.252 3.018 3.007 3.007 3.007 3.007
220 3.732 3.399 3.137 3.009 3.007 3.007 3.007
Rectangular Hollow Columns: 60 minutes
Thickness (mm) Required for a Design Temperature of Section
Factor up
to m-1
Steelmaster 120SB Table 10
Thickness is intumescent only.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 13 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
35 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
40 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
45 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
50 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
55 3.007 3.007 3.007 3.007 3.007 3.007 3.007 3.007
60 3.149 3.007 3.007 3.007 3.007 3.007 3.007 3.007
65 3.566 3.007 3.007 3.007 3.007 3.007 3.007 3.007
70 3.982 3.007 3.007 3.007 3.007 3.007 3.007 3.007
75 4.399 3.232 3.007 3.007 3.007 3.007 3.007 3.007
80 3.649 3.007 3.007 3.007 3.007 3.007 3.007
85 4.066 3.132 3.007 3.007 3.007 3.007 3.007
90 4.482 3.466 3.007 3.007 3.007 3.007 3.007
95 3.799 3.245 3.007 3.007 3.007 3.007
100 4.132 3.630 3.149 3.007 3.007 3.007
105 4.466 4.014 3.462 3.007 3.007 3.007
110 4.399 3.774 3.007 3.007 3.007
115 4.087 3.007 3.007 3.007
120 4.399 3.249 3.007 3.007
125 3.499 3.007 3.007
130 3.749 3.007 3.007
135 3.999 3.018 3.007
140 4.249 3.256 3.007
145 4.499 3.494 3.007
150 3.732 3.007
155 3.970 3.007
160 4.209 3.126
165 4.447 3.354
170 3.581
175 3.808
180 4.035
185 4.263
190 4.490
195
Rectangular Hollow Columns: 90 minutes
Section
Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 11
Thickness is intumescent only.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 14 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
Steelmaster 120SB Table 12
Thickness is intumescent only.
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 3.399 3.007 3.007 3.007 3.007 3.007 3.007
35 3.399 3.007 3.007 3.007 3.007 3.007 3.007
40 3.399 3.007 3.007 3.007 3.007 3.007 3.007
45 3.399 3.007 3.007 3.007 3.007 3.007 3.007
50 3.007 3.007 3.007 3.007 3.007 3.007
55 3.599 3.007 3.007 3.007 3.007 3.007
60 4.599 3.999 3.232 3.007 3.007 3.007
65 4.066 3.007 3.007 3.007
70 3.199 3.007 3.007
75 4.199 3.007 3.007
80 3.399 3.007
85 4.232 3.007
90 3.149
95 3.774
100 4.399
Rectangular Hollow Columns: 120 minutes
Section
Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 15 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
35 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
40 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
45 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
50 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
55 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
60 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
65 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
70 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
75 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
80 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
85 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
90 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
95 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
100 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
105 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
110 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
115 2.127 2.112 2.112 2.112 2.112 2.112 2.112 2.112
120 2.152 2.112 2.112 2.112 2.112 2.112 2.112 2.112
125 2.177 2.112 2.112 2.112 2.112 2.112 2.112 2.112
130 2.202 2.112 2.112 2.112 2.112 2.112 2.112 2.112
135 2.227 2.112 2.112 2.112 2.112 2.112 2.112 2.112
140 2.252 2.132 2.112 2.112 2.112 2.112 2.112 2.112
145 2.277 2.156 2.112 2.112 2.112 2.112 2.112 2.112
150 2.302 2.179 2.112 2.112 2.112 2.112 2.112 2.112
155 2.327 2.202 2.112 2.112 2.112 2.112 2.112 2.112
160 2.352 2.226 2.112 2.112 2.112 2.112 2.112 2.112
165 2.377 2.249 2.112 2.112 2.112 2.112 2.112 2.112
170 2.402 2.272 2.116 2.116 2.112 2.112 2.112 2.112
175 2.427 2.296 2.137 2.137 2.112 2.112 2.112 2.112
180 2.452 2.319 2.158 2.158 2.112 2.112 2.112 2.112
185 2.477 2.342 2.179 2.179 2.126 2.112 2.112 2.112
190 2.502 2.366 2.200 2.200 2.145 2.112 2.112 2.112
195 2.527 2.389 2.221 2.221 2.165 2.112 2.112 2.112
200 2.552 2.412 2.242 2.242 2.185 2.112 2.112 2.112
205 2.577 2.436 2.263 2.263 2.205 2.112 2.112 2.112
210 2.602 2.459 2.284 2.284 2.224 2.126 2.112 2.112
215 2.627 2.482 2.305 2.305 2.244 2.144 2.112 2.112
220 2.652 2.506 2.326 2.326 2.264 2.162 2.112 2.112
Circular Hollow Columns: 30 minutes
Section
Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 13
Thickness is intumescent only.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 16 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
35 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
40 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
45 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
50 2.170 2.112 2.112 2.112 2.112 2.112 2.112 2.112
55 2.233 2.126 2.112 2.112 2.112 2.112 2.112 2.112
60 2.296 2.184 2.112 2.112 2.112 2.112 2.112 2.112
65 2.360 2.242 2.112 2.112 2.112 2.112 2.112 2.112
70 2.423 2.300 2.139 2.139 2.112 2.112 2.112 2.112
75 2.486 2.359 2.191 2.191 2.140 2.112 2.112 2.112
80 2.550 2.417 2.243 2.243 2.189 2.112 2.112 2.112
85 2.613 2.475 2.295 2.295 2.239 2.135 2.112 2.112
90 2.676 2.534 2.347 2.347 2.288 2.181 2.112 2.112
95 2.739 2.592 2.399 2.399 2.337 2.227 2.123 2.112
100 2.803 2.650 2.451 2.451 2.386 2.273 2.166 2.112
105 2.866 2.708 2.503 2.503 2.436 2.319 2.209 2.112
110 2.929 2.767 2.555 2.555 2.485 2.365 2.252 2.139
115 2.993 2.825 2.608 2.608 2.534 2.412 2.295 2.179
120 3.056 2.883 2.660 2.660 2.583 2.458 2.338 2.219
125 3.119 2.942 2.712 2.712 2.632 2.504 2.381 2.259
130 3.182 3.000 2.764 2.764 2.682 2.550 2.424 2.299
135 3.239 3.058 2.816 2.816 2.731 2.596 2.467 2.339
140 3.268 3.116 2.868 2.868 2.780 2.642 2.510 2.379
145 3.297 3.175 2.920 2.920 2.829 2.688 2.553 2.419
150 3.327 3.233 2.972 2.972 2.879 2.735 2.596 2.459
155 3.356 3.261 3.025 3.025 2.928 2.781 2.639 2.499
160 3.385 3.288 3.077 3.077 2.977 2.827 2.682 2.539
165 3.414 3.316 3.129 3.129 3.026 2.873 2.725 2.578
170 3.444 3.344 3.181 3.181 3.075 2.919 2.768 2.618
175 3.473 3.371 3.233 3.233 3.125 2.965 2.812 2.658
180 3.502 3.399 3.259 3.259 3.174 3.012 2.855 2.698
185 3.532 3.426 3.286 3.286 3.223 3.058 2.898 2.738
190 3.561 3.454 3.312 3.312 3.253 3.104 2.941 2.778
195 3.590 3.482 3.339 3.339 3.278 3.150 2.984 2.818
200 3.619 3.509 3.365 3.365 3.303 3.196 3.027 2.858
205 3.649 3.537 3.391 3.391 3.328 3.238 3.070 2.898
210 3.678 3.565 3.418 3.418 3.353 3.261 3.113 2.938
215 3.707 3.592 3.444 3.444 3.378 3.285 3.156 2.978
220 3.736 3.620 3.471 3.471 3.404 3.308 3.199 3.017
Section
Factor up
to m-1
Circular Hollow Columns: 60 minutes
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 14
Thickness is intumescent only.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 17 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 2.112 2.112 2.112 2.112 2.112 2.112 2.112 2.112
35 3.558 2.112 2.112 2.112 2.112 2.112 2.112 2.112
40 3.558 2.112 2.112 2.112 2.112 2.112 2.112 2.112
45 3.558 2.249 2.112 2.112 2.112 2.112 2.112 2.112
50 3.558 2.741 2.112 2.112 2.112 2.112 2.112 2.112
55 3.558 3.233 2.410 2.303 2.213 2.155 2.112 2.112
60 3.671 3.329 2.727 2.524 2.347 2.229 2.143 2.112
65 3.785 3.426 3.043 2.746 2.481 2.303 2.211 2.112
70 3.898 3.522 3.257 2.967 2.615 2.377 2.279 2.154
75 4.012 3.618 3.317 3.189 2.750 2.450 2.347 2.219
80 4.125 3.714 3.376 3.278 2.884 2.524 2.415 2.283
85 4.238 3.811 3.436 3.334 3.018 2.598 2.483 2.347
90 4.352 3.904 3.496 3.391 3.152 2.672 2.551 2.411
95 4.465 3.996 3.555 3.447 3.251 2.746 2.620 2.475
100 4.579 4.088 3.615 3.503 3.294 2.820 2.688 2.540
105 4.692 4.180 3.675 3.560 3.338 2.893 2.756 2.604
110 4.806 4.273 3.734 3.616 3.382 2.967 2.824 2.668
115 4.919 4.365 3.794 3.672 3.426 3.041 2.892 2.732
120 5.033 4.457 3.875 3.729 3.470 3.115 2.960 2.796
125 5.146 4.549 3.989 3.785 3.514 3.189 3.029 2.861
130 5.260 4.641 4.102 3.852 3.558 3.248 3.097 2.925
135 5.373 4.733 4.216 3.962 3.602 3.286 3.165 2.989
140 5.487 4.826 4.329 4.072 3.646 3.324 3.233 3.053
145 5.600 4.918 4.443 4.182 3.690 3.361 3.267 3.117
150 5.713 5.010 4.556 4.292 3.733 3.399 3.302 3.182
155 5.102 4.670 4.402 3.777 3.437 3.336 3.239
160 5.194 4.783 4.512 3.821 3.475 3.370 3.271
165 5.287 4.897 4.623 3.958 3.513 3.405 3.303
170 5.379 5.010 4.733 4.119 3.550 3.439 3.335
175 5.471 5.123 4.843 4.279 3.588 3.473 3.366
180 5.563 5.237 4.953 4.439 3.626 3.507 3.398
185 5.655 5.350 5.063 4.600 3.664 3.542 3.430
190 5.748 5.464 5.173 4.760 3.702 3.576 3.462
195 5.577 5.283 4.920 3.739 3.610 3.493
200 5.691 5.393 5.081 3.777 3.645 3.525
205 5.503 5.241 3.815 3.679 3.557
210 5.613 5.401 4.000 3.713 3.589
215 5.723 5.562 4.284 3.748 3.620
220 5.722 4.568 3.782 3.652
Circular Hollow Columns: 90 minutes
Section
Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 15
Thickness is intumescent only.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 845 JOTUN A/S
Page 18 of 18 Signed E/140
Issued: 28th
March 2011 Reissued: 30
th March 2016
Valid to: 29th
March 2021
400oC 450oC 500oC 520oC 550oC 600oC 650oC 700oC
30 5.305 5.305 2.227 2.112 2.112 2.112 2.112
35 5.305 5.305 2.547 2.178 2.112 2.112 2.112
40 5.305 5.305 2.868 2.473 2.112 2.112 2.112
45 5.305 5.305 3.189 2.768 2.310 2.112 2.112
50 5.305 5.305 3.509 3.063 2.534 2.112 2.112
55 5.305 5.305 3.830 3.358 2.757 2.347 2.112
60 5.305 4.151 3.653 2.981 2.508 2.243
65 5.305 4.471 3.948 3.204 2.669 2.503
70 5.305 4.792 4.243 3.428 2.831 2.764
75 5.113 4.538 3.651 2.992 2.900
80 5.433 4.833 3.875 3.153 3.100
85 5.754 5.128 4.098 3.314 3.302
90 5.423 4.322 3.475 3.359
95 5.718 4.545 3.637 3.417
100 4.769 3.798 3.474
105 4.992 3.946 3.532
110 5.216 4.090 3.589
115 5.439 4.235 3.646
120 5.663 4.380 3.704
125 4.524 3.761
130 4.669 3.819
135 4.813 3.953
140 4.958 4.107
145 5.103 4.260
150 5.247 4.414
155 5.392 4.568
160 5.536 4.721
165 5.681 4.875
170 5.028
175 5.182
180 5.336
185 5.489
190 5.643
195
200
205
210
215
220
Circular Hollow Columns: 120 minutes
Section
Factor up
to m-1
Thickness (mm) Required for a Design Temperature of
Steelmaster 120SB Table 16
Thickness is intumescent only