cer catalog 2010
DESCRIPTION
CER catalog 2010 with info about IP-platfoms like webcontrollers, IP-gateways, FieldCommanders and FCDomus.TRANSCRIPT
IP-solutionsfor
• webcontrollers
• gateways
• system integration
Includes the Product groups
• FieldCommander®
• micro FieldCommander
• Embedded Controllers
• FCDomus® domotica software
solutions
webcontrollers
system integration
Includes the Product groups
micro FieldCommander®
Embedded Controllers
domotica software
V2010-bCER catalog 2010
Where to buy ?
CheckCheckwww.cer.com
for local contact info
Where to buy ?
Check
V2010-b
Checkwww.cer.com
for local contact info
CER® , the companyA
ApplicationsB
CER® Service CentreC
uFC; micro FieldCommandersD
FieldCommander® softwareE
FieldCommander® hardware platformsF
Table Of Contents
FieldCommander hardware platformsF
FieldCommander® modelsG
FieldCommander® optionsH
FCDomus®; domotica applicationI
Embedded ControllersK
AccessoriesL
ServicesM
General ConditionsN
FCGateway®; gateway toolJ
, the company A
B
Service Centre C
uFC; micro FieldCommanders® D
software E
hardware platforms F
Table Of Contents
hardware platforms F
models G
options H
; domotica application I
Embedded Controllers K
L
M
N
; gateway tool J
V2010-b
This page intentionally left blankThis page intentionally left blank
V2010-b
CER, the company
Back to TOC
CER®, the companyA
CER office in city Roosendaal, The Netherlands
ApplicationsB
CER® Service CentreC
uFC; micro FieldCommandersD
FieldCommander® softwareE
FieldCommander® hardware platformsF
FieldCommander® modelsG FieldCommander modelsG
FieldCommander® optionsH
FCDomus®; domotica applicationI
Embedded ControllersK
AccessoriesL
ServicesM
General ConditionsN
FCGateway®; gateway toolJ
, the company A
CER office in city Roosendaal,
B
Service Centre C
uFC; micro FieldCommanders® D
software E
hardware platforms F
models G
V2010-b
models G
options H
; domotica application I
Embedded Controllers K
L
M
N
; gateway tool J
CER, the company
Who is CER ?CER is a dutch engineering company, specialised in development of embedded technology.
CER supports partners with innovative technology stimulating the end users with advanced products.
A
Who uses the FieldCommander technology ?- System Integrators
- OEM (Manufacturers)
- Machinebuilders
Future proofBecause FieldCommander has an open structure and is based on standards, it provides a futureproof and flexible product for your application development.
Adjustments to your application can be achieved quickly and simply. Moreover, the script is easy to adjust.
products.
CER innovates to support partners creating happy people
simply. Moreover, the script is easy to adjust.
So FieldCommander is not just a building block, FieldCommander is a solid foundation!
CER International bvPostbus 2584700 AG RoosendaalThe NetherlandsTel: +31 165-557417Fax: +31 165-562151
CER, the companyA
Who uses the FieldCommander technology ?
Because FieldCommander has an open structure and is based on standards, it provides a futureproof and flexible product for
Adjustments to your application can be achieved quickly and simply. Moreover, the script is easy to adjust.
CER innovates to support partners creating happy people
V2010-b
simply. Moreover, the script is easy to adjust.
So FieldCommander is not just a building block, FieldCommander is a solid foundation!
This page intentionally left blankThis page intentionally left blank
V2010-b
CER®, the companyA
ApplicationsBApplications
Back to TOC
CER® Service CentreC
uFC; micro FieldCommandersD
FieldCommander® softwareE
FieldCommander® hardware platformsF
FieldCommander® modelsG FieldCommander modelsG
FieldCommander® optionsH
FCDomus®; domotica applicationI
Embedded ControllersK
AccessoriesL
ServicesM
General ConditionsN
FCGateway®; gateway toolJ
, the company A
B
Service Centre C
uFC; micro FieldCommanders® D
software E
hardware platforms F
models G
Ad van den Broek
V2010-b
models G
options H
; domotica application I
Embedded Controllers K
L
M
N
; gateway tool J
Applications
• Industrial Automation
– Machine Automation
– Intelligent Transportation
– Environmental Management
– Mobile computing
B
– Mobile computing
• Telemetry
– Test&Measurement
– Monitoring and logging
– Remote control
– Environment; Power & Energy
• Security
– Alarmsystems
– Access Control
– Object protection
– Person Protection– Person Protection
• Building Automation
– Domotica controller
– Gateway for facility systems
– Facility Management
– Integration with intercom or access control
Applications
Industrial Automation
Machine Automation
Intelligent Transportation
Environmental Management
B
Test&Measurement
Monitoring and logging
Environment; Power & Energy
V2010-b
Building Automation
Domotica controller
Gateway for facility systems
Facility Management
Integration with intercom or access control
Applications
B
• Industrial Automation
Water Treatment
www.CER.com
Unmanned Facility Monitoring System
www.CER.com
Machine Automationwww.CER.com
Production Line /Testing Machine
www.CER.com
EnvironmentalMonitoring
www.CER.com
Factory Utility Monitoring
www.CER.com
Applications
B
Industrial Automation
Water TreatmentTunnel SCADA
www.CER.com
V2010-b
Machine AutomationIntelligent Traffic Management
www.CER.com
EnvironmentalMonitoring
Civic ConstructionMonitoring
www.CER.com
Applications
www.CER.comwww.CER.com
B
• Telemetry
– Test&Measurement
– Monitoring and logging
– Remote control
– Environment; Power & Energy
www.CER.com www.CER.com
Applications
www.CER.com www.CER.com
B
Test&Measurement
Monitoring and logging
Environment; Power & Energy
V2010-b
www.CER.com www.CER.com
Applications
B
• Security
– Alarmsystems
– Access Control
– Object protection
– Article Security
– Person Protection
Applications
B
V2010-b
Applications
B
• Building Automation
– Domotica controller
– Gateway for facility systems
– Facility Management
– Integration with intercom or access control
Ad van den Broek
Applications
B
Building Automation
Domotica controller
Gateway for facility systems
Facility Management
Integration with intercom or access control
V2010-b
Ad van den Broek
This page intentionally left blankThis page intentionally left blank
V2010-b
ApplicationsB
CER®, the companyA
CER®
Service CentresCThe CER Service Centre is a datacenter for automated extra services.
For product or technical servies, please check Chapter “L. Services”
Back to TOC
uFC; micro FieldCommandersD
FieldCommander® softwareE
FieldCommander® hardware platformsF
FieldCommander® modelsG FieldCommander modelsG
FieldCommander® optionsH
FCDomus®; domotica applicationI
Embedded ControllersK
AccessoriesL
ServicesM
General ConditionsN
FCGateway®; gateway toolJ
B
, the company A
Service Centres CThe CER Service Centre is a datacenter for automated
For product or technical servies, please check Chapter
uFC; micro FieldCommanders® D
software E
hardware platforms F
models G
V2010-b
models G
options H
; domotica application I
Embedded Controllers K
L
M
N
; gateway tool J
CER Service Centre
FieldCommander
ServicesC
• A) SC MSG: Messaging Services
– send/receive Email, SMS, Voice, Paging, Twitter, XML.
• B) SC_MW; Measurement service (MeasureWare)
– Log; monitor; store; Select/filter; Present; Reports
Commander
Sensors
– Log; monitor; store; Select/filter; Present; Reports
– Energy management;
– Device/Machine monitoring; Alarm/storingsmelder
• C) SC VSB: Video Storage Bank
– Log/Monitor/Watch; storage;
•D) Software Updates services.
• E) Remote Control of local applications
• F) Alert 3rd party security services (PAC
CER Service Centre
C
A) SC MSG: Messaging Services
send/receive Email, SMS, Voice, Paging, Twitter,
B) SC_MW; Measurement service (MeasureWare)
Log; monitor; store; Select/filter; Present; Reports
V2010-b
Log; monitor; store; Select/filter; Present; Reports
Device/Machine monitoring; Alarm/storingsmelder
C) SC VSB: Video Storage Bank
Log/Monitor/Watch; storage;
D) Software Updates services.
E) Remote Control of local applications
F) Alert 3rd party security services (PAC
From data to info
ServiceCentre
SMS
C
Internet
SMS
WebServices
Communication
SMS-providers &Alarm/CareCenters
Wireless(3G) or wired
Devices-X Devices
SensorsTempPoweretc
Camera’s 1..n
Integration
From data to info
ServiceCentre
SMS
C
Internet
SMSXML
CER
Visualization,HMI & Reporting
Wireless(3G) or wired
V2010-b
Devices-Y Devices-Z
LANBusesKNXX10
ZigBee
Integration
This page intentionally left blankThis page intentionally left blank
V2010-b
ApplicationsB
CER® Service CentreC
CER®, the companyA
uFC; micro FieldCommandersDuFC; micro FieldCommanders
Back to TOC
FieldCommander® softwareE
FieldCommander® hardware platformsF
FieldCommander® modelsG FieldCommander modelsG
FieldCommander® optionsH
FCDomus®; domotica applicationI
Embedded ControllersK
AccessoriesL
ServicesM
General ConditionsN
FCGateway®; gateway toolJ
B
Service Centre C
, the company A
uFC; micro FieldCommanders® D
uFC; micro FieldCommanders
software E
hardware platforms F
models G
V2010-b
models G
options H
; domotica application I
Embedded Controllers K
L
M
N
; gateway tool J
Network I/O module uFC 9015; 7ch RTD inputWebbased smart ethernet Measurement & Control
Highlights
Link this I/O module to your computernetwork for measurement & control.
To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with low costs.
This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.
D
Specifications
• Analog Input: – Input channels: 7– Input type
• 2 or 3 wire RTD• Pt100: -50 ~15C; 0~1000C; 0~200C; -200~200C• Pt1000: -40 ~ 160C
Analog RTD input: 7x
Micro-
FieldCommander
uFC9015
• Pt1000: -40 ~ 160C• Ni518: -80~100C; 0~100C
– Sampling: 10s/sec.– Resolution: 16 bit– Volt protection:+/- 35VDC
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
uFC9015 Micro-FieldCommander; 7x RTD analog input.FCPwr10 Powersupply (euro)FCPwr10UK Powersupply (UK)
uFC 9015; 7ch RTD inputWebbased smart ethernet Measurement & Control
Link this I/O module to your computernetwork for measurement &
To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with
This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.
uFC 9015
Network support
• Ethernet; 10/100 Mbps
• UTP RJ45 connection
• Modbus/TCP; TCP/IP; UDP
Analog Input
• Support analog RTD inputs
D
200~200C
FieldCommander
uFC9015
• Support analog RTD inputs
Hardware
• Based on the low cost e-CER
platform with IP-stack.
Power supply: 10-30 VDC
Power consumption: ca. 2,4W
• DIN-rail clips included
Software tools
• DLL, ActiveX, VB, Delphi
• Can be linked with a Field-
Commander webcontroller.
Product options.
• Powersupply
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander; 7x RTD analog input.
Network I/O module uFC 9017; 8ch Analog inputWebbased smart ethernet Measurement & Control
Highlights
Link this I/O module to your computernetwork for measurement & control.
To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with low costs.
This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.
D
Specifications
•Analog Input: – Input channels: 8 – Input type
• differential• thermocouple+/V ; +/- mV; +/- mA• +/- 150mV; +/- 500V; +/- 1V; +/- 10V
Analog V/I input: 8x ; DO: 2x
Micro-
FieldCommander
uFC9017
Order info
uFC9017 Micro-FieldCommander; 8x analog V/I input.FCPwr10 Powersupply (euro)FCPwr10UK Powersupply (UK)
• +/- 150mV; +/- 500V; +/- 1V; +/- 10V• 0-20mA; 4-20mA
– Sampling: 10s/sec.– Resolution: 16 bit– Volt protection:+/- 35VDC
• Digital Output:– Channels: 2– Sink type: Open collector to 30V, 100mA(maximum load)
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
uFC 9017; 8ch Analog inputWebbased smart ethernet Measurement & Control
uFC 9017
Network support
• Ethernet; 10/100 Mbps
• UTP RJ45 connection
• Modbus/TCP; TCP/IP; UDP
Analog Input
• Support analog V/I inputs
Link this I/O module to your computernetwork for measurement &
To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with
This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.
D
FieldCommander
uFC9017
• Support analog V/I inputs
Digital Output
• Support digital outputs
Hardware
• Based on the low cost e-CER
platform with IP-stack.
Power supply: 10-30 VDC
Power consumption: ca. 2,4W
• DIN-rail clips included
Software tools
• DLL, ActiveX, VB, Delphi
• Can be linked with a Field-
Commander webcontroller.
Product options.
V2010-b
8x analog V/I input.
Sink type: Open collector to 30V, 100mA(maximum load)
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Product options.
• Powersupply
Network I/O module uFC 9019; 8ch Thermocouple inWebbased smart ethernet Measurement & Control
Highlights
Link this I/O module to your computernetwork for measurement & control.
To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with low costs.
This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.
D
Specifications
•Analog Input: – Input channels: 8 – Input type
• differential• thermocouple• J-type
Anal.Thermocouple inp.: 8x ; DO: 2x
Micro-
FieldCommander
uFC9019
Order info
uFC9019 Micro-FieldCommander; 8x Thermocouple input.FCPwr10 Powersupply (euro)FCPwr10UK Powersupply (UK)
• J-type• K-type: 0~1370C• T-type: -100 ~ 400C• E/R/S/B-type
– Sampling: 10s/sec.– Resolution: 16 bit– Volt protection:+/- 35VDC
• Digital Output:– Channels: 2– Sink type: Open collector to 30V, 100mA(maximum load)
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
uFC 9019; 8ch Thermocouple inWebbased smart ethernet Measurement & Control
uFC 9019
Network support
• Ethernet; 10/100 Mbps
• UTP RJ45 connection
• Modbus/TCP; TCP/IP; UDP
Analog Input
• Support analog thermoc. inputs
Link this I/O module to your computernetwork for measurement &
To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with
This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.
D
Anal.Thermocouple inp.: 8x ; DO: 2x
FieldCommander
uFC9019
• Support analog thermoc. inputs
Digital Output
• Support digital outputs
Hardware
• Based on the low cost e-CER
platform with IP-stack.
Power supply: 10-30 VDC
Power consumption: ca. 2,4W
• DIN-rail clips included
Software tools
• DLL, ActiveX, VB, Delphi
• Can be linked with a Field-
Commander webcontroller.
Product options.
V2010-b
8x Thermocouple input.
Sink type: Open collector to 30V, 100mA(maximum load)
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Product options.
• Powersupply
Network I/O module uFC 9050; 18ch digital I/OWebbased smart ethernet Measurement & Control
Highlights
Link this I/O module to your computernetwork for measurement & control.
To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with low costs.
This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.
D
Specifications
•Digital Input: – Input channels: 12– Input type
• Dry contact– logic level 0: Close to ground– logic level 1: Open
Digital In: 12x ; Digital Out: 6x
Micro-
FieldCommander
uFC9050
Order info
uFC9050 Micro-FieldCommander; 18ch digital I/O.FCPwr10 Powersupply (euro)FCPwr10UK Powersupply (UK)
– logic level 1: Open• Wet contact:
– logic level 0: 0~3V– logic level 1: 10~30V
– Counter/Frequency: Each channel support 3KHz input– Isolation: Fully photo-isolation 2,000Vrms
• Digital Output:– Channels: 6– Sink type: Open collector to 30V, 100mA(maximum load)– Pulse output– Isolation: Fully photo-isolation 2,000Vrms
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
uFC 9050; 18ch digital I/OWebbased smart ethernet Measurement & Control
uFC 9050
Network support
• Ethernet; 10/100 Mbps
• UTP RJ45 connection
• Modbus/TCP; TCP/IP; UDP
Digital Input
• Support dry/wet contact input
Link this I/O module to your computernetwork for measurement &
To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with
This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.
D
FieldCommander
uFC9050
• Support dry/wet contact input
Support counter/frequency input
Digital Output
• Support digital outputs
Hardware
• Based on the low cost e-CER
platform with IP-stack.
Power supply: 10-30 VDC
Power consumption: ca. 2,4W
• DIN-rail clips included
Software tools
• DLL, ActiveX, VB, Delphi
• Can be linked with a Field-
Commander webcontroller.
V2010-b
18ch digital I/O.
Counter/Frequency: Each channel support 3KHz input
Sink type: Open collector to 30V, 100mA(maximum load)
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Product options.
• Powersupply
Network I/O module uFC 9051; 14ch digital I/OWebbased smart ethernet Measurement & Control
Highlights
Link this I/O module to your computernetwork for measurement & control.
To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with low costs.
This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.
D
Specifications
•Digital Input: – Input channels: 12– Input type
• Dry contact– logic level 0: Close to ground– logic level 1: Open
D.In: 12x ; D.Out: 2x; Counter In: 2x
Micro-
FieldCommander
uFC9051
Order info
uFC9051 Micro-FieldCommander; 14ch digital I/O.FCPwr10 Powersupply (euro)FCPwr10UK Powersupply (UK)
– logic level 1: Open• Wet contact:
– logic level 0: 0~3V– logic level 1: 10~30V
– Counter/Frequency: Each channel support 3KHz input– Isolation: Fully photo-isolation 2,000Vrms
• Digital Output:– Channels: 2– Sink type: Open collector to 30V, 100mA(maximum load)– Pulse output– Isolation: Fully photo-isolation 2,000Vrms
• Digital Counter Input:– Channels: 2
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
uFC 9051; 14ch digital I/OWebbased smart ethernet Measurement & Control
uFC 9051
Network support
• Ethernet; 10/100 Mbps
• UTP RJ45 connection
• Modbus/TCP; TCP/IP; UDP
Digital Input
• Support dry/wet contact input
Link this I/O module to your computernetwork for measurement &
To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with
This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.
D
D.In: 12x ; D.Out: 2x; Counter In: 2x
FieldCommander
uFC9051
• Support dry/wet contact input
Support counter/frequency input
Digital Output
• Support digital outputs
Hardware
• Based on the low cost e-CER
platform with IP-stack.
Power supply: 10-30 VDC
Power consumption: ca. 2,4W
• DIN-rail clips included
Software tools
• DLL, ActiveX, VB, Delphi
• Can be linked with a Field-
Commander webcontroller.
V2010-b
14ch digital I/O.
Counter/Frequency: Each channel support 3KHz input
Sink type: Open collector to 30V, 100mA(maximum load)
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Product options.
• Powersupply
Network I/O module uFC 9052; 16ch digital I/OWebbased smart ethernet Measurement & Control
Highlights
Link this I/O module to your computernetwork for measurement & control.
To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with low costs.
This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.
D
Specifications
•Digital Input: – Input channels: 8– Input type
• Dry contact– logic level 0: Close to ground– logic level 1: Open
Digital In: 8x ; Digital Out: 8x;
Micro-
FieldCommander
uFC9052
Order info
uFC9052 Micro-FieldCommander; 16ch digital I/O.FCPwr10 Powersupply (euro)FCPwr10UK Powersupply (UK)
– logic level 1: Open• Wet contact:
– logic level 0: 0~3V– logic level 1: 10~30V
– Counter/Frequency: Each channel support 3KHz input– Isolation: Fully photo-isolation 2,000Vrms
• Digital Output:– Channels: 8– Sink type: Open Collector upto 30V, 1000mA(max)– Isolation: 2,000Vrms
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
uFC 9052; 16ch digital I/OWebbased smart ethernet Measurement & Control
uFC 9052
Network support
• Ethernet; 10/100 Mbps
• UTP RJ45 connection
• Modbus/TCP; TCP/IP; UDP
Digital Input
• Support dry/wet contact input
Link this I/O module to your computernetwork for measurement &
To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with
This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.
D
FieldCommander
uFC9052
• Support dry/wet contact input
Support counter/frequency input
Digital Output
• Support digital outputs
Hardware
• Based on the low cost e-CER
platform with IP-stack.
Power supply: 10-30 VDC
Power consumption: ca. 2,4W
• DIN-rail clips included
Software tools
• DLL, ActiveX, VB, Delphi
• Can be linked with a Field-
Commander webcontroller.
V2010-b
16ch digital I/O.
Counter/Frequency: Each channel support 3KHz input
Sink type: Open Collector upto 30V, 1000mA(max)
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Product options.
• Powersupply
This page intentionally left blankThis page intentionally left blank
V2010-b
ApplicationsB
CER® Service CentreC
uFC; micro FieldCommandersD
CER®, the companyA
FieldCommander®E
FieldCommander software
Back to TOC
FieldCommander® hardware platformsF
FieldCommander® modelsG FieldCommander modelsG
FieldCommander® optionsH
FCDomus®; domotica applicationI
Embedded ControllersK
AccessoriesL
ServicesM
General ConditionsN
FCGateway®; gateway toolJ
B
Service Centre C
uFC; micro FieldCommanders® D
, the company A
®software E
FieldCommander software
hardware platforms F
models G
V2010-b
models G
options H
; domotica application I
Embedded Controllers K
L
M
N
; gateway tool J
FieldCommander Software
IP-platform for webbased devicesE
FieldCommander Software
platform for webbased devices E
V2010-b
FieldCommander® : advanced application framework,supporting you with reliable and easy software.
The FieldCommander software is the solid foundation of every FieldCommander product.
Its dedicated design provides an easy and flexible application framework with high throughput and has proven to be a reliable software environment.
Use FieldCommander as a building block for your product !
E
Applications
Connectivity and interfacingCombine sensors, devices, systems, link communication an create integrated systems.
Support for many communication systemsSupport for internet and mobile phone communication. Connect your devices to the world from anywhere, anytime. Remote your devices to the world from anywhere, anytime. Remote machine/system maintenance.
Monitoring/visualisationMonitor and visualize the system status; generate realtime graphical webpages
Alert and ReportAlert users with voice, phone, SMS, pager, email or webnotify.Report system/application info using your preferred communication.
RemoteRemote maintenance, configuration and diagnostics.
ExportingExport system data for processing in a hosting system or in your PC.
LoggingLog all events.
Data acquisitionMeasure and acquire the data. Trigger on limits. Store and retrieve the info.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
: advanced application framework,supporting you with reliable and easy software.
FC-SW
The FieldCommander software is the solid foundation of
application framework with high throughput and has
Use FieldCommander as a building block for your product !
Powerful software
• realtime operating system included
• multi-user support
• multi-device support
• No PC required !!!
Ready for the future
• Web enabled
E
Combine sensors, devices, systems, link communication an
Support for internet and mobile phone communication. Connect your devices to the world from anywhere, anytime. Remote
• Web enabled
• IP-based
High performance
• The FieldCommander sw is optimized for fast operation with high througput.
• Security
• security by password
• security by IP-permission
• SSL (encrypted communication)
• no PC is required
Fieldbus/interface support
• Support many interfaces and fieldbusses, even wireless.
V2010-b
your devices to the world from anywhere, anytime. Remote
Monitor and visualize the system status; generate realtime
Alert users with voice, phone, SMS, pager, email or webnotify.
Export system data for processing in a hosting system or in your
Measure and acquire the data. Trigger on limits. Store and
Communication
• Support for many internet communications standards, so creating webapplication is easy.
• Support mobile phone communications.
• Support linking FieldCommanders together and exchange/share data
Software models.
FieldCommander software is available in 3 models /levels:
• Standard level
• Advanced level
• Extended level
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
FieldCommander® : supports your application development in many ways.
E
1. Or... FieldCommander supports youif you want an integration solution
2. Or... FieldCommander supports youif you need extra Add On Functionality
device
A
device
X
3. Or... FieldCommander is a reliable platformfor many years standalone functionality
a flexible webcontroller
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
: supports your application development in many ways.
User interface
• HTML webpages
• Realtime graphical display
• WebNotify messages for alerts
• System administration; Debug info
• Embedded browser + virtual keyboard (for FC4xxx)
• PHP server for reports/maintenance E
Networkservices included
• TCP/IP for ethernet communication
• UDP/IP for communication
• HTTP for webserver
• XML for data linking
• DHCP to distribute IP-numbers
• NTP to support internet clock
• ARP to support IP-addressing
• BOOTP to support Booting
• DNS to support domainnames
• ICMP to support ping-requests
• SSL for security
Communication
• Support for many internet communications standards, like:
• Email output+input (SMTP)
• File transfering (FTP)
• Support mobile phone comm. like.
• SMS (text message) output
• SMS (text input) input
• MMS (picture) output
1. Or... FieldCommander supports you
2. Or... FieldCommander supports youAdd On Functionality
device
B
V2010-b
• MMS (picture) output
• Support voice messages (audio) and interactive response
• Support linking FieldCommanders together and exchange/share data
• Support (ESPA) pagers systems
Fieldbus support
Support fieldbus protocols like:
• ASCII
• HVAC units (Modbus)
• Building Automation (KNX/EIB)
• Alarmsystems (Galaxy; SIA)
• I/O modules (Adam/Nudam)
• Sensors (RFID; EnOcean; ZigBee)
• IP camera’s
3. Or... FieldCommander is a reliable platformstandalone functionality
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
FieldCommander® : advanced building blocks for your products or applications.
FieldCommander software specs
Extended
Advanced
level
Standard
level
X
X
1)
X
X
1)
X
X
1)
Scripting language (FCscript)
Watchdog & security included
Hardware specs
General EAS
Database EAS
E
Webbased configuration & administration
Custom dynamic HTML pages with SSI
FCphp: Custom dynamic PHP pages
Realtime notification (WebNotify)
Realtime graphics display (WebGUI)
Embedded webbrowser with Java
Virtual keyboard support
X
X
X
X
X
X
X
X
X
X
X
X
-
-
X
X
X
-
-
-
-
Email (SMTP) out
Text messaging (SMS) in/out
Multimedia messaging (MMS) out
FTP client for file transfer
Audio features; voice messages; VoIP
Telephone functions
FC to FC export
FC to FC import
XML export
UDP in/out
X
X
1)
X
1)
XX
X
X
X
X
X
1)
X
1)
X
X
X
X
X
X
X
-
-
1)
X
X
-
-
X
Communication EAS
User interface EAS
X
4000
64
X
4000
64
X
250
16
Relational database (SQL) included
Meta tags (memory), max:
Data processing components, max:
Database EAS
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
UDP in/out XXX
IPv4
Web server (HTTP)
Web server with SSL (HTTPS)
FTP server for system administration
Network time protocol (NTP) client/server
DHCP/BOOTP
SNMPv2 agent
UPnP client; limited to gateway devices
Camera support and imaging functions
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
X
X
X
-
1) depending on productmodel
Network services EAS
Interfaces EAS
Many, many, see interface list XXX
: advanced building blocks for your products or applications.
Programmable logic control
• FieldCommander is programmable with the built in FieldCommander script
• FieldCommander script contains many high end commands
• FieldCommander script supports also many Java-script alike commands enabling you to create whatever glue-logic is required
• Extra PHP server to support maintenance of databases.
Extended
level
X
X
1)
E
E
Emaintenance of databases.
Data Processing
• SQL database tables
• file I/O
• metatags
Visualization=webpage
• Use your browser for displaying data on your PC or PDA
• Creating the graphical output or userinterface is as easy as creating your homepage. Simply because it is the same.
• Use the same webdesign tools you are familiar with to create FieldCommander webpages.
WebGUI=realtime Graphics
• Display graphical webpages in realtime (requires JVM >V1.4 on the client)
X
X
X
X
X
X
X
X
X
1)
X
1)
XX
X
X
X
E
E
X
4000
64
E
V2010-b
(requires JVM >V1.4 on the client)
• WebNotify for realtime alerts.
WebGUI is available in the Advanced or Extended version.
Report
• export custom XML document filled with up to date values
• generate graphs and gauge images of the fly with recent values
• upload your own HTML documents to generate webpages.
• send customized e-mail reports
• PHP server supports reports.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
X
X
X
X
X
X
X
X
X
X
1) depending on productmodel
E
E
X
FieldCommander® : rely on complete and powerful software blocks; available today.
FieldCommander application
WebGui Web-pages PHP-pages
Web-GUI Web-serverPHP-server
PHP-E
• install on CER hardware
or
• install on your OEM hardware
RS232
Interfacing
FC-scrip
t
File I/O
TCP
PHP-server
Metatags
FC-script:eventmanager
FC-script:data proc.
Buffe
rs
SQLdatabaseengine
Services:-
-
RS485 other ethernetflashdisk
Tables
Config
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC- FieldCommander software is integrated in the
FieldCommander products. Sw only is available for OEM.
OEM requests are welcome for private labeled versions.
= To be configured by system integrator
= Supplied with FieldCommander
: rely on complete and powerful software blocks; available today.
Embedded, NO PC required
• FieldCommander software is running embedded, so no PC is required
• If it is needed for your application, FieldCommander can work intense and closely with PC’s
• A PC can be helpful as a tool during application development.
Integration
FieldCommander application
pages
server
Tools
-graphicsE
Integration
• Linking different systems has never been so easy.
Browser support
• FieldCommander supports severals browsers, like Internet Explorer, FireFox or Netscape. Java Virt. Mach. en Javascript support is required.
Support
• application support available
• support for script design available
• Proprietary Protocol
• Please contact CER for custom made protocol support.
IP
TCP
server
Services:- XML- FTP- SSL- Email
ethernet
UDP
V2010-b
• OEM
• Please contact CER for brand labeled OEM designs and license versions.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
FieldCommander software is integrated in the
FieldCommander products. Sw only is available for OEM.
OEM requests are welcome for private labeled versions.
= To be configured by system integrator
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander® : supports your application or products development
E
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
: supports your application or
E
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
This page intentionally left blankThis page intentionally left blank
V2010-b
ApplicationsB
CER® Service CentreC
uFC; micro FieldCommandersD
FieldCommander® softwareE
CER®, the companyA
FieldCommander®F
Back to TOC
FieldCommander® modelsG
FieldCommanderFFieldCommander hardware platforms
FieldCommander modelsG
FieldCommander® optionsH
FCDomus®; domotica applicationI
Embedded ControllersK
AccessoriesL
ServicesM
General ConditionsN
FCGateway®; gateway toolJ
B
Service Centre C
uFC; micro FieldCommanders® D
software E
, the company A
®hardware platforms F
models G
hardware platforms FFieldCommander hardware platforms
V2010-b
models G
options H
; domotica application I
Embedded Controllers K
L
M
N
; gateway tool J
FieldCommander® technology:Hardware Platform-5
High Performance & Extended interfacesFChwp5 is the hardware platform for applications requiring many interface possibilities and still a high performance.This platform is usefull in applications with system integration or system gateways.Because of the numerous I/O connections available it is an universal foundation.
F
Technical Specifications
Processor VIA C7 1GHz
Memory 256MB RAM + 256MB flashdisk
Network port 2x 10/100Base-T Ethernet, auto detect
USB 3x USB2
F
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
USB 3x USB2
Mechanical Aluminum casing, desk model WxDxH: 23.4 x 17.5 x 4.9cmWeight: 1.0 kg
RS-232 portsInterface 3x RS-232 serial ports (EIA/TIA-232-C)Connector D-sub 9 pins, (EIA/TIA-574)Distance 15.2 meter max (50 feet)Baud rate 50 ~ 230K4 bps
RS-485 portsInterface 1x RS-485 serial ports (EIA/TIA-485-A, ISO 8482)Connector D-sub 9 pins (EIA/TIA-574)Distance 1220 meter max (4000 feet)Baud rate 50 ~ 1500K bps
I/OAudio Audio Mic-IN+ audio Line-OUT
Power 12V DC In; ca. 2A
technology:
FChwp5 is the hardware platform for applications requiring many interface possibilities and still a high performance.This platform is usefull in applications with system integration or system gateways.Because of the numerous I/O connections available
Powerful hardware
• powerful VIA CPU
• solid state harddisk
• fanless operation
• Quality
• strong and compact aluminum casing with plastic over
FChwp5
Fcasing with plastic over
• easily mountedl
• fanless, no moving parts
• watchdog timer included
• dust free – No fan
• low power consumption – No fan needed
• anti vibration – Up to 1,5G
• anti shock – Up to 10G
• Wide operating temperature -0~55C
• Protection against small foreign objects –IP30
• Embedded storage – CompactFlash disk
• CE and FCC class A certified
Options.
• Power supply 230V
• Also available in 4xRS232
T Ethernet, auto detect
F
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
C)
A, ISO 8482)
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander® technology:Hardware Platform-8
High Computing Power with clear display.The FChwp8 is the perfect hardware platform for applications where a user interface is a requirement and a PC is not an option due to reliability, cost, and support issues. FChwp8 supports the FieldCommander software, including the embedded browser and touchscreendriver.Its reliable design guarantees a longtime use.
F
Technical Specifications 12,1” (10,4”/8,4”) version
Processor AMD Geode LX-800 500MHz
Display 12,1(10,4/8,4)” TFT LCDresolution 1024x768 (1024x768/800x600)with touchscreen; IP64
Memory 256 MB RAM + 4GB flashdisk
12,1” version 8,4” version
F
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Memory 256 MB RAM + 4GB flashdisk
Network port 2x 10/100Base-T Ethernet, auto detect. RJ-45 CAT5 cable included
USB 2x USB2.0
Mechanical ABS plastic + aluminium casing,VESA, wall or panel mount option, WxDxH: 30,5x5x25 (23x4,2x18)cmWeight: 1,,8(0,8) kg
RS-232 portsInterface 2x RS-232 serial ports (EIA/TIA-232-C)Connector D-sub 9 pins, (EIA/TIA-574) Baud rate 50 ~ 115K2 bpsData bits 5, 6, 7 or 8
I/OAudio Audio Out (integrated LS 1,5W); Audio Line InConnector 1x mini-PCI
Power Powersupply 12V DC In; ca. 20W
technology:
The FChwp8 is the perfect hardware platform for applications where a user interface is a requirement and a PC is not an option due to reliability, cost, and
FieldCommander software, including the embedded
Its reliable design guarantees a longtime use.
Powerful hardware
• powerful AMD Geode CPU
• solid state harddisk
• fanless operation
• Reliable quality
• strong and compact plastic casing
• Vesa 100/75 wall (rear) mounting.
FChwp8
F• Vesa 100/75 wall (rear) mounting.
• anti vibration – Up to 1,5G
• anti shock – Up to 10G
• operating temperature – 0~50C
• Embedded storage – CompactFlash disk
Options.
• Power supply 230V
• wall- or panel mount option
• door phone set
• larger flash disk
resolution 1024x768 (1024x768/800x600)
F
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
T Ethernet, auto detect.
C)
Audio Out (integrated LS 1,5W); Audio Line InCER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander® technology:Hardware Platform-9
High Computing Power with great display.The FChwp9 is the perfect hardware platform for applications where a user interface is a requirement and a PC is not an option due to reliability, cost, and support issues. FChwp9 supports the FieldCommander software, including the embedded browser and touchscreendriver.Its industrial design guarantees a longtime use.
F
Technical Specifications 15” version
Processor Intel Celeron 800MHz
Display 15” TFT LCD (1024x768) (800x600 for 8/10” version)
with touchscreen (8 wire resistive type)
Memory 256MB RAM + 4GB flashdisk
F
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Memory 256MB RAM + 4GB flashdisk
Network port 10/100Base-T Ethernet, auto detect.
USB 4x USB2.0
Mechanical Aluminum casing, panel/wall mount;flush mount,
RS-232 portsInterface 3x RS-232 serial ports (EIA/TIA-232-C)Connector D-sub 9 pins, (EIA/TIA-574); 50 ~ 115K2 bps
RS-485 portsInterface 1x RS-485 serial ports (EIA/TIA-485-A, ISO 8482)Connector D-sub 9 pins (EIA/TIA-574); 50 ~ 115K2 bps
I/OAudio Audio Mic-In & audio Line-OutConnector 1x I2C + 1x Mini-PCI
Power External poweradaptor incl. 100-240VAC; ca.70VA
technology:
The FChwp9 is the perfect hardware platform for applications where a user interface is a requirement and a PC is not an option due to reliability, cost, and
FieldCommander software, including the embedded
Its industrial design guarantees a longtime use.
Powerful hardware
• powerful Pentium compatible CPU
• fanless; solid state harddisk
• Industrial quality
• strong and compact aluminum casing
• easily mounted in panel; frontpanel.
• support VESA75/100 mounting
FChwp9
F• support VESA75/100 mounting
• no moving parts
• IP53 water-resistant front panel
• anti vibration – Up to 1,5G
• anti shock – Up to 10G
• Wide operating temperature – 0~40C
• Embedded storage – CompactFlash disk
Options.
• Optional doorphone/audiopanel
• also available in 4x RS232-version
• also available in 8”, 10” or 12”
• larger flash disk
15” TFT LCD (1024x768) (800x600 for 8/10”
with touchscreen (8 wire resistive type)
8” 10” 12” 15”
F
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
C)574); 50 ~ 115K2 bps
A, ISO 8482)574); 50 ~ 115K2 bps
240VAC;
8” 10” 12” 15”
Panel WxH 27,0x19,4 31,0x23,0 36,0x28,0 41.0x31.0
D (cm) 0,9 0,9 0,9 0,9
Case WxH 24,5x17,1 28,0x20,0 33,5x25,7 38.6x25.7
D (cm) 7,4 7,7 10,1 10.2Weigh(Kg) 5 7 9 11
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander® technology:Hardware Platform-10(A/
High performance, low power and still low cost.Excellent solution for OEM applications.FChwp10 is the hardware platform for applications requiring low energy and quiet operation with a high performance for a low price. This platform is usefull in many advanced OEM applications.Several private labeling options are possible.
F
Technical Specifications
Processor AMD Geode LX700/800/800 at 433/500
Memory 128/256/256 MB RAM + Compact flashdisk
Network port 10/100Base-T Ethernet, auto detect
F
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
USB 0/2/2 x USB2 (Imax 1A)
Mechanical Aluminum casing Alu 1,5mm
WxDxH: 163 x 113 x 30mm
Weight: 0.6 kg
RS-232 port
Interface 1x RS-232 serial ports (EIA/TIA-232-C)
Connector D-sub 9 pins, (EIA/TIA-574)
Flow control no hardware flow control
I/O
Video No Video/No Video/VGA(UXGA)
Audio No/No/Audio Mic-IN+ audio Line-OUT
Interface Option: I2C
Interface Option: General Purpose 4 bit digital I/O
Connector 2x Mini-PCI connector internal
Power 9-18V DC In; 0,8A max; 5W avg
use power adaptor OR pass.
PoE (not 802.3af compliant).
technology:10(A/B/C)
High performance, low power and still low cost.
FChwp10 is the hardware platform for applications requiring low energy and quiet operation with a high performance for a low price. This platform is usefull
Several private labeling options are possible.
Powerful hardware
• powerfull and reliable AMD LX CPU
• solid state harddisk
• fanless operation
• Quality
• strong and compact 1,5mm alu casing
FChwp10
F• strong and compact 1,5mm alu casing
• easily mountedl
• fanless, no moving parts
• watchdog timer included (in CPU)
• dust free – No fan
• low power consumption – No fan needed
• anti vibration – Up to 1,5G
• anti shock – Up to 10G
• operating temperature -0~50C
• Protection for small foreign objects – IP40
• rubber plugs for unused SMA openings
• Embedded storage – CompactFlash disk
• CE and FCC class A certified
• ROHS compliant; PB free
Options.
• Power supply 230V
• industrial grade flash disk
• Oudoor case; Waterproof Nema 67
• Passive Power over Ethernet injector
• extra RS232/RS485-ports
500/500 MHz
/256 MB RAM + Compact flashdisk
F
V2010-b
OEM version
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• extra RS232/RS485-ports
• mini-PCI module
• WiFi module
• larger flash disk
• Kensington Lock Hole
• brandlabeling color/logo
C)
Option: General Purpose 4 bit digital I/OCER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander® technology:Hardware Platform-10(A/B) Outdoor
Excellent low cost solution for outdoor applications.FChwp10 is the hardware platform for application requiring a good performance for a low price.This platform is usefull in OEM applications.Several private labeling options are possible.
F
Technical Specifications
Processor AMD Geode LX800 at 500 MHz
Memory 256MB RAM + 1GB/4GB flashdisk
Network port 10/100Base-T Ethernet, auto detect
USB 0/2x USB2 (Imax 1A)
F
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
USB 0/2x USB2 (Imax 1A)
Mechanical Aluminum casing WxDxH: ca. 200 x 80 x 140mmWeight: 2 kg
RS-232 portsInterface 1x RS-232 serial ports (EIA/TIA-232-C)Connector D-sub 9 pins, (EIA/TIA-574)Flow control no hardware flow control
I/OVideo No Video/VGA(UXGA)Interface Option: I2CConnector 2x Mini-PCI connector internal
Power 9-18V DC In; 0,8A max; 5W avguse power adaptor OR pass. PoE (not 802.3af
compliant).
technology:10(A/B) Outdoor
Excellent low cost solution for outdoor applications.FChwp10 is the hardware platform for application requiring a good performance for a low price.
Several private labeling options are possible.
Powerful hardware
• powerfull and reliable AMD LX CPU
• solid state harddisk
• fanless operation
• Quality
• strong die-cast 3mm alu casing
• easily mountedl
FChwp10O
F• easily mountedl
• fanless, no moving parts
• watchdog timer included (in CPU)
• dust free – No fan
• low power consumption – No fan needed
• waterproof; IP65 certified
• anti vibration – Up to 1,5G
• anti shock – Up to 10G
• Wide operating temperature -0~60C
(so outside temp. can be -20~55C)
• Embedded storage – CompactFlash disk
• CE and FCC class A certified
Options.
• Wall mount option
• Pole top mounting option
• Power supply 230V
• extra RS232 or RS485 ports
• no antennas included; 1 antenna outlet standard; option for 2 or 4 antenna outlets.
Outdoor
F
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
C)
use power adaptor OR pass. PoE (not 802.3af
Outdoor version
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander® technology:Hardware Platform-11(A/B/C)
Multi LAN, high performance, low power and still low cost.FChwp11 is the hardware platform for applications requiring several LAN connections with a high performance for a low price.This platform is usefull in many advanced network applications, like firewall or router.Several brandlabel options are available.
F
Technical Specifications
Processor AMD Geode LX700/800/800 at 433/500
Memory 128/256/256 MB RAM + 1/4/4 GB flashdisk
Network port 3x LAN; 10/100Base-T Ethernet, auto detect
USB 2 x USB2
F
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
USB 2 x USB2
Mechanical Aluminum casing Alu 1,5mmWxDxH: 158 x 155 x 28mmWeight: 0.5 kg
RS-232 portInterface 1x RS-232 serial ports (EIA/TIA-232-C)Connector D-sub 9 pins, (EIA/TIA-574)Flow control no hardware flow controlBaud rate 50 ~ 115K2 bpsData bits 5, 6, 7 or 8
I/OVideo No VideoAudio No AudioInterface Option: I2CConnector 1x Mini-PCI connector internal
Power 7-20V DC In; 0,8A max; 5W avguse power adaptor OR PoE (not 802.3af
compliant).
technology:11(A/B/C)
Multi LAN, high performance, low power and still low
FChwp11 is the hardware platform for applications requiring several LAN connections with a high
This platform is usefull in many advanced network
Powerful hardware
• powerfull and reliable AMD LX CPU
• solid state harddisk
• fanless operation
• Quality
• strong and compact 1,5mm alu casing
• easily mountedl
FChwp11
F• easily mountedl
• fanless, no moving parts
• watchdog timer included (in CPU)
• dust free – No fan
• low power consumption – No fan needed
• anti vibration – Up to 1,5G
• anti shock – Up to 10G
• operating temperature -0~50C
• Protection for small foreign objects – IP40
• Embedded storage – CompactFlash disk
• CE and FCC class A certified
• Options.
• Power supply 230V
• 19” enclosure
• Passive Power over Ethernet injector
• mini-PCI module
• WiFi module
• larger flash disk
• brandlabeling color/logo
500/500 MHz
/4 GB flashdisk
T Ethernet, auto detect
PoE adaptor
F
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
C)
use power adaptor OR PoE (not 802.3af
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander® technology:Hardware Platform-12(A/B/C)
Excellent performance and still low cost.Great solution for OEM applications which required high processing power (for example for Windows Embedded). FChwp12 is the hardware platform for applications requiring high processing power in an embedded environment with many I/O for a low price. This platform is usefull in many advanced OEM applications. Several private labeling options are possible.
F
Technical Specifications
Processor Intel Celeron M-Dothan at 1GHz
Memory 256/512/- MB RAM + 1/4/- GB flashdisk
Network port 2x LAN; 10/100Base-T Ethernet, auto detect
USB 2 x USB2 ext. + 3x USB2 int.
F
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
USB 2 x USB2 ext. + 3x USB2 int.
Mechanical Aluminum casing Alu 1,5mm blackWxDxH: 275 x 172 x 50mmWeight: 2 kg
RS-232/485Interface 3x RS-232 serial ports (EIA/TIA-232-C)
1x RS232/RS485 serial portConnector D-sub 9 pins, (EIA/TIA-574)Flow control hardware flow controlBaud rate 50 ~ 115K2 bpsData bits 5, 6, 7 or 8
I/OVideo Video(VGA)Audio AudioInterface 8xDI; 8xDOConnector 1x Mini-PCI connector internal
Power 12V DC In; 2A max; 9W avg
technology:12(A/B/C)
Great solution for OEM applications which required high processing power (for example for Windows Embedded). FChwp12 is the hardware platform for applications requiring high processing power in an embedded environment with many I/O for a low price. This platform is usefull in many advanced OEM applications. Several private labeling options
Powerful hardware
• powerfull and reliable Intel Celeron CPU
• solid state harddisk
• fanless operation
• Quality
• strong and compact 1,5mm alu casing
• easily mountedl
FChwp12
F• easily mountedl
• fanless, no moving parts
• watchdog timer included (in CPU)
• dust free – No fan
• low power consumption – No fan needed
• anti vibration – Up to 1,5G
• anti shock – Up to 10G
• operating temperature -0~50C
• Protection for small foreign objects – IP40
• Embedded storage – CompactFlash disk
• CE and FCC class A certified
Options.
• Power supply 230V
• wallmount kit
• mini-PCI module
• WiFi module
• larger flash disk
• brandlabeling color/logo
GB flashdisk
T Ethernet, auto detect
F
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
C)
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander® technology:Hardware Platform-13; compact touchpanel
Computing Power with great display; compact design for low cost visualisation and control applications. The FChwp13 is the perfect hardware platform for applications where a user interface is a requirement and a PC is not an option due to reliability, cost, and support issues. FChwp13 supports the FieldCommander software.Its industrial design guarantees a longtime use.
F
Technical Specifications 5,7” version
Processor Vortex 86DX-1GHz
Display 5.7” TFT LCD (640x480); LED backlightwith touchscreen (4-wire analog resistive type)
Memory 256MB RAM DDR2 + 4GB flashdisk
F
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Network port 10/100Base-T Ethernet, auto detect.
USB 2x USB2.0
Mechanical Aluminum casing, panel/wall mount;
RS-232/485Interface 1x RS-232/485 serial ports (EIA/TIA-232Connector D-sub 9 pins, (EIA/TIA-574); 50 ~ 115K2 bps
I/OAudio Audio Line-OutConnector 1x Mini-PCI
Power +8-+35VDC ca. 1,3A
technology:13; compact touchpanel
Computing Power with great display; compact design for low cost visualisation and control applications. The FChwp13 is the perfect hardware platform for applications where a user interface is a requirement and a PC is not an option due to
FChwp13 supports the FieldCommander software.Its industrial design guarantees a longtime use.
Powerful hardware
• powerful 32 bits x86 compatible CPU
• fanless; solid state harddisk
• Industrial quality
• strong and compact aluminum casing
• easily mounted in panel; frontpanel
• support VESA75 mounting
FChwp13
F• support VESA75 mounting
• no moving parts
• IP53 water-resistant front panel
• anti vibration – Up to 1,5G
• anti shock – Up to 10G
• Wide operating temperature – -5~60C
• Embedded storage – CompactFlash disk
Options.
• External poweradaptor 100-240VAC; 18VDC ca.18VA
• larger flash disk
• extra RS232/RS485-ports
• WiFi module
5.7” TFT LCD (640x480); LED backlightwire analog resistive type)
F
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
232-C)574); 50 ~ 115K2 bps
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander® technology:Hardware Platform-14A; HMI
High Computing Power with clear display.The FChwp14A is the perfect hardware platform for applications where a user interface is a requirement and a PC is not an option due to reliability, cost, and support issues. FChwp14A supports the FieldCommander software, including the embedded browser and touchscreendriver.Its reliable design guarantees a longtime use.
F
Technical Specifications 8,4” version
Processor Intel Atom N270 1.6GHz
Display 8,4” TFT LCD (800x600); 400cd; 50.000hr !with touchscreen (4-wire analog resistive type)
Memory 1GB RAM + 4GB flashdisk
F
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Network port 2x10/100/1000Base-T Ethernet, auto detect.
USB 2x USB2.0
Mechanical ABS+plastic casing, panel/wall mount;WxDxH: 263 x 221 x 55mmWeight: 0.8 kg
RS-232/485Interface 1x RS-232 serial ports (EIA/TIA-232-C)
1x RS232/RS485 serial portConnector D-sub 9 pins, (EIA/TIA-574)
I/OAudio Audio Mic-In + LS 2x 1,5Watt.Camera 300K pixel Camera up to VGA resolution (640x480)Connector 1x Mini-PCI
Power +10-28VDC ca. 25W
technology:14A; HMI-control panel
The FChwp14A is the perfect hardware platform for applications where a user interface is a requirement and a PC is not an option due to reliability, cost, and
FieldCommander software, including the embedded
Its reliable design guarantees a longtime use.
Powerful hardware
• powerful 32 bits x86 compatible CPU
• fanless; solid state harddisk
• Industrial quality
• strong and compact aluminum casing
• easily mounted in panel; frontpanel
• support VESA75 mounting
FChwp14A
F• support VESA75 mounting
• no moving parts
• IP64 water-resistant front panel
• anti vibration – Up to 1,5G
• anti shock – Up to 10G
• Wide operating temperature – -0~50C
• Embedded storage – CompactFlash disk
Options.
• Other faceplates and sticker skins
• External poweradaptor 100-240VAC;
12VDC ca.30VA
• larger flash disk
• extra RS232/RS485-ports
• WiFi module
8,4” TFT LCD (800x600); 400cd; 50.000hr !wire analog resistive type)
F
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
T Ethernet, auto detect.
ABS+plastic casing, panel/wall mount;
C)
300K pixel Camera up to VGA resolution
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander® technology:Hardware Platform-14B; Access control panel
The FChwp14B is the perfect hardware platform for access control applications. The LCD and touchscreen offers a nice userinterface while audio support, camera and RFID is also available.FChwp14B supports the FieldCommander software.Its solid design guarantees a longtime use.
F
Technical Specifications 8,4” version
Processor Intel Atom N270 1.6GHz
Display 8,4” TFT LCD (800x600); 400cdwith touchscreen (4-wire analog resistive type)
Memory 1GB RAM + 4GB flashdisk
F
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Network port 2x10/100/1000Base-T Ethernet, auto detect.
USB 2x USB2.0
Mechanical ABS+plastic casing, panel/wall mount;
RS-232/485Interface 1x RS-232 serial ports (EIA/TIA-232-C)
1x RS232/RS485 serial portConnector D-sub 9 pins, (EIA/TIA-574)
I/OAudio Audio Mic-In + LS 2x 1,5Watt.RFID MIFARE (13.56MHz) & EM (125KHz) RFID ReaderCamera 300K pixel Camera up to VGA resolution (640x480)Connector 1x Mini-PCI
Power +12VDC ca. 35W
technology:14B; Access control panel
The FChwp14B is the perfect hardware platform for
touchscreen offers a nice userinterface while audio
FChwp14B supports the FieldCommander software.
Powerful hardware
• powerful 32 bits x86 compatible CPU
• fanless; solid state harddisk
• Industrial quality
• strong and compact aluminum casing
• easily mounted in panel; frontpanel
• support VESA75 mounting
FChwp14B
F• support VESA75 mounting
• no moving parts
• IP64 water-resistant front panel
• anti vibration – Up to 1,5G
• anti shock – Up to 10G
• Wide operating temperature – -10~50C
• Embedded storage – CompactFlash disk
Options.
• External poweradaptor 100-240VAC; 12VDC ca.48VA
• larger flash disk
• extra RS232/RS485-ports
• WiFi module
wire analog resistive type)
F
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
T Ethernet, auto detect.
ABS+plastic casing, panel/wall mount;
C)
MIFARE (13.56MHz) & EM (125KHz) RFID Reader300K pixel Camera up to VGA resolution
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander® technology:Hardware Platform-14C; Intercom console
The FChwp14C is the perfect hardware platform for indoor intercom applications with HMI. The LCD and touchscreen offers a nice userinterface while audio support, camera and RFID is also available.FChwp14C supports the FieldCommander software.Its solid design guarantees a longtime use.
F
Technical Specifications 8,4” version
Processor Intel Atom N270 1.6GHz
Display 8,” TFT LCD (800x600); 250cdwith touchscreen (5-wire analog resistive type)
Memory 1GB RAM + 4GB flashdisk
F
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Network port 2x10/100/1000Base-T Ethernet, auto detect. + wireless network WiFi 802.11b/g
USB 3x USB2.0
Mechanical ABS+plastic casing, panel/wall mount;
RS-232/485Interface 1x RS-232 serial ports (EIA/TIA-232-C)
1x RS232/RS485 serial portConnector D-sub 9 pins, (EIA/TIA-574)
I/OAudio Audio Mic-In + LS 2x 3Watt.RFID MIFARE (13.56MHz) & EM (125KHz) RFID ReaderCamera 300K pixel Camera up to VGA resolution (640x480)Connector
Power +12VDC ca. 38W
technology:14C; Intercom console
The FChwp14C is the perfect hardware platform for indoor intercom applications with HMI. The LCD and touchscreen offers a nice userinterface while audio
FChwp14C supports the FieldCommander software.
Powerful hardware
• powerful 32 bits x86 compatible CPU
• fanless; solid state harddisk
• Industrial quality
• strong and compact aluminum casing
• easily mounted in panel; frontpanel
• support VESA75 mounting
FChwp14C
F• support VESA75 mounting
• no moving parts
• IP64 water-resistant front panel
• anti vibration – Up to 1,5G
• anti shock – Up to 10G
• Wide operating temperature – -10~50C
• Embedded storage – CompactFlash disk
Options.
• External poweradaptor 100-240VAC; 12VDC ca.48VA
• larger flash disk
• extra RS232/RS485-ports
• In-wall case
wire analog resistive type)
F
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
T Ethernet, auto detect.
ABS+plastic casing, panel/wall mount;
C)
MIFARE (13.56MHz) & EM (125KHz) RFID Reader300K pixel Camera up to VGA resolution
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Option:
In-wall case
FieldCommander® technology:Hardware Platform-15; HMI+audio
The FChwp15 is the perfect hardware platform for visualisation in style. The 8” LED TFT-LCD and stylish flat-bezel touchscreen offers a great user interface while audio support and camera is also available.FChwp15 supports the FieldCommander software.Its stylish design supports residential use.
F
Technical Specifications 15” version
Processor Intel Atom N270 1.6GHz
Display 8” LED TFT LCD ( 800x600 )with touchscreen (5-wire analog resistive type)
Memory 1GB RAM + 4GB flashdisk
F
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Network port 2x10/100/1000Base-T Ethernet, auto detect. + WiFi 802.11b/g
USB 2x USB2.0
Mechanical ABS+plastic front frame black, panel/wall mount;WxDxH: 234 x 43 x 137 mmWeight: 1,8 kg
RS-232/485Interface 1x RS-232 serial ports (EIA/TIA-232-C)
1x RS232/RS485 serial portConnector D-sub 9 pins, (EIA/TIA-574)
I/OAudio Audio Mic-In + LS 2x 1.5Watt.Camera 300K pixel CameraBluetooth Bluetooth 2.0 integrated
Power +12VDC ca. 32W
technology:15; HMI+audio
The FChwp15 is the perfect hardware platform for LCD and
bezel touchscreen offers a great user interface while audio support and camera is also
FChwp15 supports the FieldCommander software.
Powerful hardware
• powerful 32 bits x86 compatible CPU
• fanless solid state harddisk
• Stylish design with quality
• stylish ABS casing
• easily mounted on wall or in case
• support VESA75 mounting
FChwp15
F• support VESA75 mounting
• no moving parts
• IP64 water-resistant front panel
• anti vibration – Up to 1,5G
• anti shock – Up to 6G
• Operating temperature –10~50C
• Embedded storage – CompactFlash disk
Options.
• External poweradaptor 100-240VAC; 12VDC ca.40A
• larger flash disk
• extra I/O
• In-wall case; decoration kit
wire analog resistive type)
Option:
F
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
T Ethernet, auto detect.
ABS+plastic front frame black, panel/wall mount;
C)
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Option:
In-wall case
ApplicationsB
CER® Service CentreC
uFC; micro FieldCommandersD
FieldCommander® softwareE
FieldCommander® hardware platformsF
CER®, the companyA
Back to TOC
FieldCommander hardware platformsF
FieldCommander®G
FieldCommander models
FieldCommander® optionsH
FCDomus®; domotica applicationI
Embedded ControllersK
AccessoriesL
ServicesM
General ConditionsN
FCGateway®; gateway toolJ
B
Service Centre C
uFC; micro FieldCommanders® D
software E
hardware platforms F
, the company A
hardware platforms F®
models G
FieldCommander models
V2010-b
options H
; domotica application I
Embedded Controllers K
L
M
N
; gateway tool J
FieldCommander® FC2500:Intelligent General Purpose I/O Server
Highlights
Creating embedded applications is easy when you use the FieldCommander technology.FieldCommanders supports many sensors, actors and interfaces.The FieldCommander software is a complete application framework with tools. Now you can design a reliable application in a short time with low costs.
Webcontroller with spftware Framework for e-Applications
G
FieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.A FieldCommander device can be used as standalone controller, as an I/O satelite or as an advanced gateway.The use of Ethernet and an extensive set of supported TCP/IP services, such as the built-in Web server and FTP server, allow you to access and manage the devices over local area networks and even the Internet.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product With its 4 communiation channels (3xRS232; 1xRS485), it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC2500 FieldCommander; Standard sw; 4 channel.FCPwr5 Powersupply (euro)
FC2500:Intelligent General Purpose I/O Server
FC2500
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Basic software.
IP support
• FieldCommander technology is
Creating embedded applications is easy when you use
FieldCommanders supports many sensors, actors and
The FieldCommander software is a complete application framework with tools. Now you can design a reliable
Applications
• FieldCommander technology is
IP(Internet Protocol) based.
Hardware
• Based on the FieldCommander HW5-platform. Please check the HWP5 datasheet for more detailed info.
Hardware accessories.
Software/hardware limits
• max. 4 convertercomponents
• max. 4 ports
Options.
G
V2010-b
based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
A FieldCommander device can be used as standalone controller, as
The use of Ethernet and an extensive set of supported TCP/IP in Web server and FTP server, allow you
to access and manage the devices over local area networks and
Based on the FieldCommander technology creating a new product With its 4 communiation channels (3xRS232; 1xRS485), it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• Powersupply
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander; Standard sw; 4 channel.
Highlights
Creating embedded applications is easy when you use the FieldCommander technology.FieldCommanders supports many sensors, actors and interfaces.The FieldCommander software is a complete application framework with tools. Now you can design a reliable application in a short time with low costs.
FieldCommander® FC2700:Intelligent I/O application server; Powerful but low cost
Webcontroller with software Framework for e-Applications
G
FieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.A FieldCommander device can be used as standalone controller, as an I/O satelite or as an advanced gateway.The use of Ethernet and an extensive set of supported TCP/IP services, such as the built-in Web server and FTP server, allow you to access and manage the devices over local area networks and even the Internet.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC2700 FieldCommander; Standard sw; .FCPwr10 Powersupply for HWP10/11 (euro)FCPwr10UK Powersupply for HWP10/11 (UK)
FC2700
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Basic software.
IP support
• FieldCommander technology is
Creating embedded applications is easy when you use
FieldCommanders supports many sensors, actors and
The FieldCommander software is a complete application framework with tools. Now you can design a reliable
FC2700:Intelligent I/O application server; Powerful but low cost
Applications
• FieldCommander technology is
IP(Internet Protocol) based
Hardware
• Hardware is based on the poweful
FieldCommander HW10A
platform.
Please check the HWP10 data
sheet for more detailed info.
• 1x RS232
Hardware accessories.
• DIN-rail clips included
• Many options available
Software/hardware limits
• max. 2 convertercomponents
• max. 2 ports
G
V2010-b
based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
A FieldCommander device can be used as standalone controller, as
The use of Ethernet and an extensive set of supported TCP/IP in Web server and FTP server, allow you
to access and manage the devices over local area networks and
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Options.
• Powersupply
• Larger flash disk
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander® FC3500:Intelligent General Purpose I/O Server
Highlights
Creating embedded applications is easy when you use the FieldCommander technology.FieldCommanders supports many sensors, actors and interfaces.The FieldCommander software is a complete application framework with tools. Now you can design a reliable application in a short time with low costs.
Webcontroller with spftware Framework for e-Applications
G
FieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.A FieldCommander device can be used as standalone controller, as an I/O satelite or as an advanced gateway.The use of Ethernet and an extensive set of supported TCP/IP services, such as the built-in Web server and FTP server, allow you to access and manage the devices over local area networks and even the Internet.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product With its 4 communiation channels (3xRS232; 1xRS485), it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC3500 FieldCommander; Advanced sw; 4 channel.FCPwr5 Powersupply (euro)
FC3500:Intelligent General Purpose I/O Server
FC3500
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Advanced software
IP support
• FieldCommander technology is
Creating embedded applications is easy when you use
FieldCommanders supports many sensors, actors and
The FieldCommander software is a complete application framework with tools. Now you can design a reliable
Applications
• FieldCommander technology is
IP(Internet Protocol) based.
Hardware
• Based on the FieldCommander HW5-platform. Please check the HWP5 datasheet for more detailed info.
Hardware accessories.
•
Software/hardware limits
• max. 4 convertercomponents
• max. 4 ports
Options.
G
V2010-b
based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
A FieldCommander device can be used as standalone controller, as
The use of Ethernet and an extensive set of supported TCP/IP in Web server and FTP server, allow you
to access and manage the devices over local area networks and
Based on the FieldCommander technology creating a new product With its 4 communiation channels (3xRS232; 1xRS485), it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• Powersupply
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander; Advanced sw; 4 channel.
Highlights
Creating embedded applications is easy when you use the FieldCommander technology.FieldCommanders supports many sensors, actors and interfaces.The FieldCommander software is a complete application framework with tools. Now you can design a reliable application in a short time with low costs.
FieldCommander® FC3700:Intelligent I/O application server; Powerful but low cost
Webcontroller with software Framework for e-Applications
G
FieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.A FieldCommander device can be used as standalone controller, as an I/O satelite or as an advanced gateway.The use of Ethernet and an extensive set of supported TCP/IP services, such as the built-in Web server and FTP server, allow you to access and manage the devices over local area networks and even the Internet.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC3700 FieldCommander; Advanced sw; .FCPwr10 Powersupply for HWP10/11 (euro)FCPwr10UK Powersupply for HWP10/11 (UK)
FC3700
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Advanced software
IP support
• FieldCommander technology is
Creating embedded applications is easy when you use
FieldCommanders supports many sensors, actors and
The FieldCommander software is a complete application framework with tools. Now you can design a reliable
FC3700:Intelligent I/O application server; Powerful but low cost
Applications
• FieldCommander technology is
IP(Internet Protocol) based
Hardware
• Hardware is based on the poweful
FieldCommander HW10B
platform.
Please check the HWP10 data
sheet for more detailed info.
• 1x RS232
Hardware accessories.
• DIN-rail clips included
• Many options available
Software/hardware limits
• max. 2 convertercomponents
• max. 2 ports
G
V2010-b
based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
A FieldCommander device can be used as standalone controller, as
The use of Ethernet and an extensive set of supported TCP/IP in Web server and FTP server, allow you
to access and manage the devices over local area networks and
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Options.
• Powersupply
• Larger flash disk
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Highlights
Creating embedded applications is easy when you use the FieldCommander technology.FieldCommanders supports many sensors, actors and interfaces.The FieldCommander software is a complete application framework with tools. Now you can design a reliable application in a short time with low costs.
FieldCommander® FC3720:Intelligent I/O application server; Powerful but low cost
Webcontroller with software Framework for e-Applications
G
FieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.A FieldCommander device can be used as standalone controller, as an I/O satelite or as an advanced gateway.The use of Ethernet and an extensive set of supported TCP/IP services, such as the built-in Web server and FTP server, allow you to access and manage the devices over local area networks and even the Internet.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC3722 FieldCommander; Adv. sw; 2xRS232FC3724 FieldCommander; Adv. sw; 1xRS232;1xRS485FCPwr10 Powersupply for HWP10/11 (euro)FCPwr10UK Powersupply for HWP10/11 (UK)
FC3720
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Advanced software
IP support
• FieldCommander technology is
Creating embedded applications is easy when you use
FieldCommanders supports many sensors, actors and
The FieldCommander software is a complete application framework with tools. Now you can design a reliable
FC3720:Intelligent I/O application server; Powerful but low cost
Applications
• FieldCommander technology is
IP(Internet Protocol) based
Hardware
• Hardware is based on the poweful
FieldCommander HW10B
platform.
Please check the HWP10 data
sheet for more detailed info.
• 1/2x RS232 (model depending)
• 1/0x RS485 (model depending)
Hardware accessories.
• DIN-rail clips included
• Many options available
Software/hardware limits
• max. 3 convertercomponents
• max. 3 ports
G
V2010-b
based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
A FieldCommander device can be used as standalone controller, as
The use of Ethernet and an extensive set of supported TCP/IP in Web server and FTP server, allow you
to access and manage the devices over local area networks and
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 3 ports
Options.
• Powersupply
• Larger flash disk
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander; Adv. sw; 2xRS232FieldCommander; Adv. sw; 1xRS232;1xRS485
Highlights
Creating embedded applications is easy when you use the FieldCommander technology.FieldCommanders supports many sensors, actors and interfaces.The FieldCommander software is a complete application framework with tools. Now you can design a reliable application in a short time with low costs.
FieldCommander® FC3730:Intelligent I/O application server; Powerful but low cost
Webcontroller with software Framework for e-Applications
G
FieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.A FieldCommander device can be used as standalone controller, as an I/O satelite or as an advanced gateway.The use of Ethernet and an extensive set of supported TCP/IP services, such as the built-in Web server and FTP server, allow you to access and manage the devices over local area networks and even the Internet.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC3732 FieldCommander; Adv. sw; 3xRS232FC3734 FieldCommander; Adv. sw; 2xRS232;1xRS485FCPwr10 Powersupply for HWP10/11 (euro)FCPwr10UK Powersupply for HWP10/11 (UK)
FC3730
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Advanced software
IP support
• FieldCommander technology is
Creating embedded applications is easy when you use
FieldCommanders supports many sensors, actors and
The FieldCommander software is a complete application framework with tools. Now you can design a reliable
FC3730:Intelligent I/O application server; Powerful but low cost
Applications
• FieldCommander technology is
IP(Internet Protocol) based
Hardware
• Hardware is based on the poweful
FieldCommander HW10B
platform.
Please check the HWP10 data
sheet for more detailed info.
• 2/3x RS232 (model depending)
• 1/0x RS485 (model depending)
Hardware accessories.
• DIN-rail clips included
• Many options available
Software/hardware limits
• max. 4 convertercomponents
• max. 4 ports
G
V2010-b
based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
A FieldCommander device can be used as standalone controller, as
The use of Ethernet and an extensive set of supported TCP/IP in Web server and FTP server, allow you
to access and manage the devices over local area networks and
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 4 ports
Options.
• Powersupply
• Larger flash disk
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander; Adv. sw; 3xRS232FieldCommander; Adv. sw; 2xRS232;1xRS485
Highlights
The FC4107 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser.Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable application in a short time with low costs.
FieldCommander® FC4107:Intelligent I/O server with built in 7” LCD/TS
Applications
Visualization of building
G
Visualization of building
Controlroom
Lightcontroller partycentrum.
System visualization
Kiosk-mode.
With doorphone option: VoIP-based intercom/domotica controller
Webcontroller with software Framework for e-ApplicationsFieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC4107 FieldCommander Console; Extended sw; 7”
FC4107
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Extended software
Software accessories incl.
• FieldCommander technology is
The FC4107 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a
Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable
FC4107:Intelligent I/O server with built in 7” LCD/TS
• FieldCommander technology is
IP(Internet Protocol) based
• Embedded browser
• Touchscreen driver
Hardware
• Hardware is based on the fanless
FieldCommander HW8
platform.
Please check the HWP8 data
sheet for more detailed info.
Hardware accessories.
• Power supply 230V included
• Many options available
Software/hardware limits
• max. 4 convertercomponents
• max. 2 ports
G
V2010-b
based intercom/domotica controller
Applicationsbased(web)
applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 2 ports
Options.
• Powersupply
• Larger flash disk
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected] Console; Extended sw; 7”
Highlights
The FC4108 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser.Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable application in a short time with low costs.
FieldCommander® FC4108:Intelligent I/O server with built in 8” LCD/TS
Applications
Visualization of building
G
Visualization of building
Controlroom
Lightcontroller partycentrum.
System visualization
Kiosk-mode.
With doorphone option: VoIP-based intercom/domotica controller
Webcontroller with software Framework for e-ApplicationsFieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC4108 FieldCommander Console; Extended sw; 8”
FC4108
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Extended software
Software accessories incl.
• FieldCommander technology is
The FC4108 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a
Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable
FC4108:Intelligent I/O server with built in 8” LCD/TS
• FieldCommander technology is
IP(Internet Protocol) based
• Embedded browser
• Touchscreen driver
Hardware
• Hardware is based on the fanless
FieldCommander HW8
platform.
Please check the HWP8 data
sheet for more detailed info.
Rear mount VESA
Hardware accessories.
• Power supply 230V included
• Many options available
Software/hardware limits
• max. 4 convertercomponents
G
V2010-b
based intercom/domotica controller
Applicationsbased(web)
applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 4 convertercomponents
• max. 2 ports
Options.
• Powersupply
• Larger flash disk
• extra RS232/RS485-ports
• WiFi module
• Also available in 10” or 12”.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected] Console; Extended sw; 8”
Highlights
The FC4110 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser.Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable application in a short time with low costs.
FieldCommander® FC4110:Intelligent I/O server with built in 10” LCD/TS
Applications
Visualization of building
G
Visualization of building
Controlroom
Lightcontroller partycentrum.
System visualization
Kiosk-mode.
With doorphone option: VoIP-based intercom/domotica controller
Webcontroller with software Framework for e-ApplicationsFieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC4110 FieldCommander Console; Extended sw; 10”
FC4110
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Extended software
Software accessories incl.
• FieldCommander technology is
The FC4110 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a
Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable
FC4110:Intelligent I/O server with built in 10” LCD/TS
• FieldCommander technology is
IP(Internet Protocol) based
• Embedded browser
• Touchscreen driver
Hardware
• Hardware is based on the fanless
FieldCommander HW8
platform.
Please check the HWP8 data
sheet for more detailed info.
Rear mount VESA
Hardware accessories.
• Power supply 230V included
• Many options available
Software/hardware limits
• max. 4 convertercomponents
G
V2010-b
based intercom/domotica controller
Applicationsbased(web)
applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 4 convertercomponents
• max. 2 ports
Options.
• Powersupply
• Larger flash disk
• extra RS232/RS485-ports
• WiFi module
• Also available in 8” or 12”.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected] Console; Extended sw; 10”
Highlights
The FC4112 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser.Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable application in a short time with low costs.
FieldCommander® FC4112:Intelligent I/O server with built in 12” LCD/TS
Applications
Visualization of building
G
Visualization of building
Controlroom
Lightcontroller partycentrum.
System visualization
Kiosk-mode.
With doorphone option: VoIP-based intercom/domotica controller
Webcontroller with software Framework for e-ApplicationsFieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC4112 FieldCommander Console; Extended sw; 12”
FC4112
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Extended software
Software accessories incl.
• FieldCommander technology is
The FC4112 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a
Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable
FC4112:Intelligent I/O server with built in 12” LCD/TS
• FieldCommander technology is
IP(Internet Protocol) based
• Embedded browser
• Touchscreen driver
Hardware
• Hardware is based on the fanless
FieldCommander HW8
platform.
Please check the HWP8 data
sheet for more detailed info.
Rear mount VESA
Hardware accessories.
• Power supply 230V included
• Many options available
Software/hardware limits
• max. 4 convertercomponents
G
V2010-b
based intercom/domotica controller
Applicationsbased(web)
applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 4 convertercomponents
• max. 2 ports
Options.
• Powersupply
• Larger flash disk
• extra RS232/RS485-ports
• WiFi module
• Also available in 8” or 10”.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected] Console; Extended sw; 12”
Highlights
The FC4208 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser.Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable application in a short time with low costs.
FieldCommander® FC4208:Intelligent I/O server with built in 8” LCD/TS
Applications
Visualization of building
G
Visualization of building
Controlroom
Lightcontroller partycentrum.
System visualization
Kiosk-mode.
With doorphone option: VoIP-based intercom/domotica controller
Webcontroller with software Framework for e-ApplicationsFieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC4208 FieldCommander Console; Extended sw; 8”FCoptDP2 DoorPhone handset option
FC4208
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Extended software
Software accessories incl.
• FieldCommander technology is
The FC4208 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a
Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable
FC4208:Intelligent I/O server with built in 8” LCD/TS
• FieldCommander technology is
IP(Internet Protocol) based
• Embedded browser
• Touchscreen driver
Hardware
• Hardware is based on the fanless
FieldCommander HW9
platform.
Please check the HWP9 data
sheet for more detailed info.
Panel mount
Hardware accessories.
• Power supply 230V included
• Many options available
Software/hardware limits
• max. 4 convertercomponents
G
V2010-b
based intercom/domotica controller
Applicationsbased(web)
applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 4 convertercomponents
• max. 2 ports
Options.
• Powersupply
• Larger flash disk
• extra RS232/RS485-ports
• WiFi module
• Also available in 10”, 12” or 15”.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander Console; Extended sw; 8”
* doorphone option
Highlights
The FC4210 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser.Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable application in a short time with low costs.
FieldCommander® FC4210:Intelligent I/O server with built in 10” LCD/TS
Applications
Visualization of building
G
Visualization of building
Controlroom
Lightcontroller partycentrum.
System visualization
Kiosk-mode.
With doorphone option: VoIP-based intercom/domotica controller
Webcontroller with software Framework for e-ApplicationsFieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC4210 FieldCommander Console; Extended sw; 10”FCoptDP2 DoorPhone handset option
FC4210
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Extended software
Software accessories incl.
• FieldCommander technology is
The FC4210 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a
Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable
FC4210:Intelligent I/O server with built in 10” LCD/TS
• FieldCommander technology is
IP(Internet Protocol) based
• Embedded browser
• Touchscreen driver
Hardware
• Hardware is based on the fanless
FieldCommander HW9
platform.
Please check the HWP9 data
sheet for more detailed info.
Panel mount
Hardware accessories.
• Power supply 230V included
• Many options available
Software/hardware limits
• max. 4 convertercomponents
G
V2010-b
based intercom/domotica controller
Applicationsbased(web)
applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 4 convertercomponents
• max. 2 ports
Options.
• Powersupply
• Larger flash disk
• extra RS232/RS485-ports
• WiFi module
• Also available in 8”, 12” or 15”.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander Console; Extended sw; 10”
* doorphone option
Highlights
The FC4212 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser.Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable application in a short time with low costs.
FieldCommander® FC4212:Intelligent I/O server with built in 10” LCD/TS
Applications
Visualization of building
G
Visualization of building
Controlroom
Lightcontroller partycentrum.
System visualization
Kiosk-mode.
With doorphone option: VoIP-based intercom/domotica controller
Webcontroller with software Framework for e-ApplicationsFieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC4212 FieldCommander Console; Extended sw; 12”FCoptDP2 DoorPhone handset option
FC4212
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Extended software
Software accessories incl.
• FieldCommander technology is
The FC4212 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a
Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable
FC4212:Intelligent I/O server with built in 10” LCD/TS
• FieldCommander technology is
IP(Internet Protocol) based
• Embedded browser
• Touchscreen driver
Hardware
• Hardware is based on the fanless
FieldCommander HW9
platform.
Please check the HWP9 data
sheet for more detailed info.
Panel mount
Hardware accessories.
• Power supply 230V included
• Many options available
Software/hardware limits
• max. 4 convertercomponents
G
V2010-b
based intercom/domotica controller
Applicationsbased(web)
applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 4 convertercomponents
• max. 2 ports
Options.
• Powersupply
• Larger flash disk
• extra RS232/RS485-ports
• WiFi module
• Also available in 8”, 10” or 15”.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander Console; Extended sw; 12”
* doorphone option
Highlights
The FC4215 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser.Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable application in a short time with low costs.
FieldCommander® FC4215:Intelligent I/O server with built in 10” LCD/TS
Applications
Visualization of building
G
Visualization of building
Controlroom
Lightcontroller partycentrum.
System visualization
Kiosk-mode.
With doorphone option: VoIP-based intercom/domotica controller
Webcontroller with software Framework for e-ApplicationsFieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC4215 FieldCommander Console; Extended sw; 15”FCoptDP2 DoorPhone handset option
FC4215
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Extended software
Software accessories incl.
• FieldCommander technology is
The FC4215 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a
Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable
FC4215:Intelligent I/O server with built in 10” LCD/TS
• FieldCommander technology is
IP(Internet Protocol) based
• Embedded browser
• Touchscreen driver
Hardware
• Hardware is based on the fanless
FieldCommander HW9
platform.
Please check the HWP9 data
sheet for more detailed info.
Panel mount
Hardware accessories.
• Power supply 230V included
• Many options available
Software/hardware limits
• max. 4 convertercomponents
G
V2010-b
based intercom/domotica controller
Applicationsbased(web)
applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 4 convertercomponents
• max. 2 ports
Options.
• Powersupply
• Larger flash disk
• extra RS232/RS485-ports
• WiFi module
• Also available in 8”, 10” or 12”.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander Console; Extended sw; 15”* doorphone option
Highlights
The FC4305 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser.Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable application in a short time with low costs.
FieldCommander® FC4305:Intelligent I/O server with built in 5.7” LCD/TS
Applications
Visualization of building
G
Visualization of building
Controlroom
Lightcontroller partycentrum.
System visualization
Kiosk-mode.
With doorphone option: VoIP-based intercom/domotica controller
Webcontroller with software Framework for e-ApplicationsFieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC4305 FieldCommander Console; Extended sw; 5.7”FCoptDP2 DoorPhone handset option
FC4305
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Extended software
Software accessories incl.
• FieldCommander technology is
The FC4305 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a
Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable
FC4305:Intelligent I/O server with built in 5.7” LCD/TS
• FieldCommander technology is
IP(Internet Protocol) based
• Embedded browser
• Touchscreen driver
Hardware
• Hardware is based on the fanless
FieldCommander HW13
platform.
Please check the HWP13 data
sheet for more detailed info.
Panel mount
Hardware accessories.
• Power supply 230V included
• Many options available
Software/hardware limits
• max. 4 convertercomponents
G
V2010-b
based intercom/domotica controller
Applicationsbased(web)
applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 4 convertercomponents
• max. 4 ports
Options.
• Powersupply
• Larger flash disk
• extra RS232/RS485-ports
• WiFi module..
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander Console; Extended sw; 5.7”
* doorphone option
Highlights
The FC44A08 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser.Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable application in a short time with low costs.
FieldCommander® FC44A08:Intelligent I/O server with built in 8.4” LCD/TS
Applications
Welcome systemFCEntercom
G
Welcome system
Entrance controller
Parking controller
Visualization of building
Kiosk-mode.
With doorphone option: VoIP-based intercom/domotica controller
Webcontroller with software Framework for e-ApplicationsFieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC44A08 FieldCommander Console; Extended sw; 8.4”
FC44A08
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Extended software
Software accessories incl.
• FieldCommander technology is
The FC44A08 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a
Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable
FC44A08:Intelligent I/O server with built in 8.4” LCD/TS
• FieldCommander technology is
IP(Internet Protocol) based
• Embedded browser
• Touchscreen driver
Hardware
• Hardware is based on the fanless
FieldCommander HW14A
platform.
Please check the HWP14 data
sheet for more detailed info.
Panel mount
Hardware accessories.
• Power supply 230V included
• Many options available
Software/hardware limits
• max. 4 convertercomponents
FCEntercom
G
V2010-b
based intercom/domotica controller
Applicationsbased(web)
applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 4 convertercomponents
• max. 4 ports
Options.
• Powersupply
• Larger flash disk
• extra RS232/RS485-ports
• WiFi module..
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected] Console; Extended sw; 8.4”
Highlights
The FC44B08 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser.Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable application in a short time with low costs.
FieldCommander® FC44B08:Intelligent I/O server with built in 8.4” LCD/TS
Applications
Welcome systemFCEntercom
G
Welcome system
Entrance controller
Parking controller
Visualization of building
Kiosk-mode.
With doorphone option: VoIP-based intercom/domotica controller
Webcontroller with software Framework for e-ApplicationsFieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC44B08 FieldCommander Console; Extended sw; 8.4”
FC44B08
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Extended software
Software accessories incl.
• FieldCommander technology is
The FC44B08 is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a
Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable
FC44B08:Intelligent I/O server with built in 8.4” LCD/TS
• FieldCommander technology is
IP(Internet Protocol) based
• Embedded browser
• Touchscreen driver
Hardware
• Hardware is based on the fanless
FieldCommander HW14B
platform.
Please check the HWP14B data
sheet for more detailed info.
Panel mount
Hardware accessories.
• Power supply 230V included
• Many options available
Software/hardware limits
• max. 4 convertercomponents
FCEntercom
G
V2010-b
based intercom/domotica controller
Applicationsbased(web)
applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 4 convertercomponents
• max. 4 ports
Options.
• Powersupply
• Larger flash disk
• extra RS232/RS485-ports
• WiFi module..
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected] Console; Extended sw; 8.4”
Highlights
The FC44C08 is intended for applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser. Visualization, intercom and access control is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable application in a short time with low costs.
FieldCommander® FC44C08:Intelligent I/O server with built in 8.4” LCD/TS
Applications
Welcome system
CER
G
Welcome system
Entrance controller
Parking controller
Visualization of building
Kiosk-mode.
With doorphone option: VoIP-based intercom/domotica controller
Webcontroller with software Framework for e-ApplicationsFieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC44C08 FieldCommander Console; Extended sw; 8.4”
FC44C08
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Extended software
Software accessories incl.
• FieldCommander technology is
The FC44C08 is intended for applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser. Visualization, intercom and access
FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable
FC44C08:Intelligent I/O server with built in 8.4” LCD/TS
• FieldCommander technology is
IP(Internet Protocol) based
• Embedded browser
• Touchscreen driver
Hardware
• Hardware is based on the fanless
FieldCommander HW14C
platform.
Please check the HWP14C data
sheet for more detailed info.
Panel mount
Hardware accessories.
• Power supply 230V included
• Many options available
Software/hardware limits
• max. 4 convertercomponents
speaker
Mic
RFID
Cam
8” LCD
+
Touchscreen
G
V2010-b
based intercom/domotica controller
Applicationsbased(web)
applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 4 convertercomponents
• max. 4 ports
Options.
• Powersupply
• Larger flash disk
• extra RS232/RS485-ports
• WiFi module..
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected] Console; Extended sw; 8.4”
Highlights
The FC470x is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a controller and an embedded browser.Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable application in a short time with low costs.
FieldCommander® FC4700:Intelligent I/O application with HMI interface
Applications
Welcome system
G
Welcome system
Entrance controller
Parking controller
Visualization of building
Kiosk-mode.
With doorphone option: VoIP-based intercom/domotica controller
Webcontroller with software Framework for e-ApplicationsFieldCommander is a platform to create IP-based(web) applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or fieldbuses.
Reliable, flexible and easy to useBased on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with several available options.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
FC4701 FieldCommander Extended; with VGA video out.FC4702 FieldCommander Extended; video + TS support.FCPwr10 Powersupply for HWP10/11 (euro)FCPwr10UK Powersupply for HWP10/11 (UK)
FC4700
Software
• Based on the reliable and proven
FieldCommander software.
Included is the Extended software
Software accessories incl.
• FieldCommander technology is
The FC470x is intended for embedded applications where a user interface is a requirement. Creating embedded applications is easy when you use the FieldCommander technology. This unit is both a
Visualization is very popular with this model.FieldCommander software is a complete application framework with tools and supports many sensors, actors and interfaces. You can design a reliable
FC4700:Intelligent I/O application with HMI interface
• FieldCommander technology is
IP(Internet Protocol) based
• Embedded browser
• Touchscreen driver
Hardware
• Hardware is based on the fanless
FieldCommander HW10C
platform.
Please check the HWP10 data
sheet for more detailed info.
• 1x RS232 default.
Hardware accessories.
• DIN-rail clips included
• Many options available
Software/hardware limits
• max. 2 convertercomponents
G
V2010-b
based intercom/domotica controller
Applicationsbased(web)
applications. With the included FieldCommander embedded software tools it is easy to link to many devices, sensors or
Based on the FieldCommander technology creating a new product is easy. With its I/O ports it can control instruments and acquire data from several field buses. The system can be extended with
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• max. 2 convertercomponents
• max. 1 ports
Options.
• Powersupply
• Larger flash disk
• extra RS232/RS485-ports
• Touchscreen support (FC4702)
• WiFi module..
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FieldCommander Extended; with VGA video out.FieldCommander Extended; video + TS support.
* doorphone option
This page intentionally left blankThis page intentionally left blank
V2010-b
ApplicationsB
CER® Service CentreC
uFC; micro FieldCommandersD
FieldCommander® softwareE
FieldCommander® hardware platformsF
CER®, the companyA
Back to TOC
FieldCommander hardware platformsF
FieldCommander® modelsG
FieldCommander®H
FieldCommander options
FCDomus®; domotica applicationI
Embedded ControllersK
AccessoriesL
ServicesM
General ConditionsN
FCGateway®; gateway toolJ
B
Service Centre C
uFC; micro FieldCommanders® D
software E
hardware platforms F
, the company A
hardware platforms F
models G®
options HFieldCommander options
V2010-b
; domotica application I
Embedded Controllers K
L
M
N
; gateway tool J
Highlights
Many devices are communicating with a simple ASCII protocol. The popular ASCII protocol is being used in many markets like test & measurement, building automation or in industrial automation.This ASCII frame converter is an software option, enabling the FieldCommander software to link to ASCII devices.
Applications:Communication
• Extend your ASCII-device with the FieldCommander
ASCII frame converter:software option for FieldCommander
• Extend your ASCII-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
Visualization
• Using FieldCommander and this software option it is now easy to link your ASCII device and visualize the system on a webpage.Integration
• Your ASCII device can now be integrated with other systems.
Monitoring, alerting and reporting
• Monitor ASCII devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
FieldCommander script
• script example included
• support for many dedicated FieldCommander functions included.
H
System requirements:Communication• at least 1 free communication port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt005 ASCII frame protocol converter;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
FCopt005
Extra/New
• Communicate with ASCII devices
• Support extra functionality to your ASCII devices
• Support linking systems
Enable integration
Many devices are communicating with a simple ASCII protocol. The popular ASCII protocol is being used in many markets like test & measurement, building
This ASCII frame converter is an software option, enabling the FieldCommander software to link to ASCII
device with the FieldCommander
software option for FieldCommander® devices
• Link ASCII devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support ASCII sensors and actors
• supports ASCII bidirectional.
• 1 license for 1 FieldCommander;
no license restrictions for ASCII devices.
•support simple ASCII
Some ASCII protocols are too complex for the ASCII frame converter. For many of those devices, dedicated protocol convertors are available.
• Content
• Protocol converter software
• Driver software
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your ASCII device and visualize the system on a webpage.
Your ASCII device can now be integrated with other systems.
Monitor ASCII devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Highlights
Modbus is a popular protocol that is being used in many markets like test & measurement, building automation or in industrial automation.This Modbus software option is a protocol converter, enabling the FieldCommander software to link to Modbus devices.
Applications:Communication• Extend your Modbus-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
MODBUS ASC converter:software option for FieldCommander
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your Modbus device and visualize the system on a webpage.Integration• Your Modbus device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor Modbus devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
Switches
Detectors
Control
Light
SensorsFieldCommander
ActorsEnOcean
adaptor
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free communication port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt010 Modbus ASC protocol converter;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Modbus is a registered trademark of AEG Schneider Corp.
FCopt010
Extra/New
• Communicate with Modbus devices
• Support extra functionality to your Modbus devices
• Support linking systems
Enable integration
Modbus is a popular protocol that is being used in many markets like test & measurement, building automation
This Modbus software option is a protocol converter, enabling the FieldCommander software to link to
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
Enable integration
• Link Modbus devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support Modbus Mastermode for sensors and actors
• supports Modbus bidirectional.
• 1 license for 1 FieldCommander; max. 4 ModBus converters;
no license restrictions for Modbus devices.
• Content
• Protocol converter software
• Driver software
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your Modbus device and visualize the system on a webpage.
Your Modbus device can now be integrated with other systems.
Monitor Modbus devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
Switches
Detectors
Sensors
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Modbus is a registered trademark of AEG Schneider Corp.
Highlights
Modbus is a popular protocol that is being used in many markets like test & measurement, building automation or in industrial automation.This Modbus software option is a protocol converter, enabling the FieldCommander software to link to Modbus devices.
Applications:Communication• Extend your Modbus-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
MODBUS RTU converter:software option for FieldCommander
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your Modbus device and visualize the system on a webpage.Integration• Your Modbus device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor Modbus devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
Switches
Detectors
Control
Light
SensorsFieldCommander
ActorsEnOcean
adaptor
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free communication port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt015 Modbus RTU protocol converter;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Modbus is a registered trademark of AEG Schneider Corp.
FCopt015
Extra/New
• Communicate with Modbus devices
• Support extra functionality to your Modbus devices
• Support linking systems
Enable integration
Modbus is a popular protocol that is being used in many markets like test & measurement, building automation
This Modbus software option is a protocol converter, enabling the FieldCommander software to link to
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
Enable integration
• Link Modbus devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support Modbus Mastermode for sensors and actors
• supports Modbus bidirectional.
• 1 license for 1 FieldCommander;
max. 4 ModBus converters;
no license restrictions for Modbus devices.
• Content
• Protocol converter software
• Driver software
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your Modbus device and visualize the system on a webpage.
Your Modbus device can now be integrated with other systems.
Monitor Modbus devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
Switches
Detectors
Sensors
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Modbus is a registered trademark of AEG Schneider Corp.
Highlights
Modbus is a popular protocol that is being used in many markets like test & measurement, building automation or in industrial automation. This Modbus software option is a protocol converter, enabling the FieldCommander software to link to Modbus devices.The Modbus protocol is already many years very popular. In the beginning Modbus was mostly used on RS232 or RS485 interfaces. Recently the IP-version, Modbus/TCP, is becoming popular also.
Applications:Communication• Extend your Modbus-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
MODBUS/TCP converter:software option for FieldCommander
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your Modbus device and visualize the system on a webpage.Integration• Your Modbus device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor Modbus devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
Switches
Detectors
Control
Light
SensorsFieldCommander
ActorsEnOcean
adaptor
Application
visualization
logging
control
H
System requirements:Communication• a network (IP-communication) is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt017 Modbus/TCP protocol converter;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Modbus is a registered trademark of AEG Schneider Corp.
FCopt017
Extra/New
• Communicate with Modbus devices
• Support extra functionality to your Modbus devices
• Support linking systems
Enable integration
Modbus is a popular protocol that is being used in many markets like test & measurement, building automation or in industrial automation. This Modbus software option is a protocol converter, enabling the FieldCommander
The Modbus protocol is already many years very popular. In the beginning Modbus was mostly used on RS232 or RS485 interfaces.
version, Modbus/TCP, is becoming popular also.
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
Enable integration
• Link Modbus devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support Modbus Mastermode for sensors and actors
• supports Modbus bidirectional.
• 1 license for 1 FieldCommander;
max. 4 ModBus converters;
no license restrictions for Modbus devices.
• Content
• Protocol converter software
• Driver software
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your Modbus device and visualize the system on a webpage.
Your Modbus device can now be integrated with other systems.
Monitor Modbus devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
Switches
Detectors
Sensors
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Modbus is a registered trademark of AEG Schneider Corp.
Highlights
Galaxy is a popular alarm system that is being used in many security area’s like building automation or industrial automation.This Galaxy software option is a protocol converter, enabling the FieldCommander software to link to Galaxy devices.
Applications:Communication• Extend your Galaxy-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
Galaxy converter:software option for FieldCommander
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your Galaxy systems and visualize the system on a webpage.Integration• Your Galaxy system can now be integrated with other systems.Monitoring, alerting and reporting• Monitor Galaxy systems and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
Sensors
Actors
Application
visualization
logging
control
FieldCommander
H
System requirements:Communication• at least 1 free RS485 communication port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt020 Galaxy protocol converter;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Galaxy is a registered trademark of Ademco/Microtech Ltd; now Honeywell .
FCopt020
Extra/New
• Communicate with Galaxy Security devices
• Support extra functionality to your Galaxy devices
• Support linking systems
Enable integration
Galaxy is a popular alarm system that is being used in many security area’s like building automation or
This Galaxy software option is a protocol converter, enabling the FieldCommander software to link to Galaxy
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
Enable integration
• Link Galaxy devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
•support Galaxy(XL) security/alarm system devices; NO G3 support !
• Support Keypad(emulation) mode (galaxy 8/18/60/128/500/504/512)
• Support RIO (emulation) mode (inputs only; outputs not supported)
• Support device logging mode (logging internal RIO is not possible)
• Support linking to the AB-bus dataline.
• Support dutch&english galaxy sys.
• Content
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your Galaxy systems and visualize the system on a webpage.
Your Galaxy system can now be integrated with other systems.
Monitor Galaxy systems and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
H
V2010-b
at least 1 free RS485 communication port is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
• Protocol converter software
• Driver software
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Galaxy is a registered trademark of Ademco/Microtech Ltd; now
Highlights
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular protocol (european standard Cenelec EN50090international standard ISO/IEC 14543-3.) that is being used in home&building automation.The KNX/EIB software option is a protocol converter, enabling the FieldCommander software to link to KNX/EIB devices.
Applications:Communication• Extend your KNX-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
KNX/EIB converter:software option for FieldCommander
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your KNX device and visualize the system on a webpage.Integration• Your KNX device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor KNX devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free RS232 port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt030 KNX/EIB protocol converter+BCuKNXSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
KNX is a registered trademark of Konnex Association.
Visualization or remote controlKNX/EIB devices
FCopt030
Extra/New
• Communicate with KNX devices
• Support extra functionality to your KNX devices
• Support linking systems
Enable integration
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular
EN50090 and ) that is
The KNX/EIB software option is a protocol converter, enabling the FieldCommander software to link to
device with the FieldCommander communications
software option for FieldCommander® devices compatibleKNXEIB
• Link KNX devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support KNX for sensors and actors
• Support an UTP-type KNX-bus.
• 1 license for 1 FieldCommander;
no license restrictions for KNX devices.
• Content
• Protocol converter software
• Driver software RS232 adaptor
• Adapter included (data interface for BCU); white. !! NO BCU/BA !!
Using FieldCommander and this software option it is now easy to link your KNX device and visualize the system on a webpage.
Your KNX device can now be integrated with other systems.
Monitor KNX devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free RS232 port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
KNX/EIB protocol converter+BCuKNX-adaptor;Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
KNX
TCP/IP
EthernetKNX/EIB GSM
PC/PDAI/O
Visualization or remote control
Highlights
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular protocol (european standard Cenelec EN50090international standard ISO/IEC 14543-3.) that is being used in home&building automation.The KNX/EIB software option is a protocol converter, enabling the FieldCommander software to link to KNX/EIB devices.
Applications:Communication• Extend your KNX-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
KNX/EIB converter:software option for FieldCommander
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your KNX device and visualize the system on a webpage.Integration• Your KNX device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor KNX devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free RS232 port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt031 KNX/EIB protocol converter+DIN-KNX adaptor;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
KNX is a registered trademark of Konnex Association.
Visualization or remote controlKNX/EIB devices
FCopt031
Extra/New
• Communicate with KNX devices
• Support extra functionality to your KNX devices
• Support linking systems
Enable integration
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular
EN50090 and ) that is
The KNX/EIB software option is a protocol converter, enabling the FieldCommander software to link to
device with the FieldCommander communications
software option for FieldCommander® devices compatibleKNXEIB
• Link KNX devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support KNX for sensors and actors
• Support an UTP-type KNX-bus.
• 1 license for 1 FieldCommander;
no license restrictions for KNX devices.
• Content
• Protocol converter software
• Driver software RS232 adaptor
• KNX adapter (interface) included.
DIN-rail version 35mm; 2TE
Using FieldCommander and this software option it is now easy to link your KNX device and visualize the system on a webpage.
Your KNX device can now be integrated with other systems.
Monitor KNX devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free RS232 port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
KNX adaptor;Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
KNX
TCP/IP
EthernetKNX/EIB GSM
PC/PDAI/O
Visualization or remote control
Highlights
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular protocol (european standard Cenelec EN50090international standard ISO/IEC 14543-3.) that is being used in home&building automation.The KNX/EIB software option is a protocol converter, enabling the FieldCommander software to link to KNX/EIB devices.
Applications:Communication• Extend your KNX-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
KNX/EIB converter:software option for FieldCommander
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your KNX device and visualize the system on a webpage.Integration• Your KNX device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor KNX devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free RS232 port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt032 KNX/EIB protocol converter; NO KNX adaptor;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
KNX is a registered trademark of Konnex Association.
Visualization or remote controlKNX/EIB devices
FCopt032
Extra/New
• Communicate with KNX devices
• Support extra functionality to your KNX devices
• Support linking systems
Enable integration
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular
EN50090 and ) that is
The KNX/EIB software option is a protocol converter, enabling the FieldCommander software to link to
device with the FieldCommander communications
software option for FieldCommander® devices compatibleKNXEIB
• Link KNX devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support KNX for sensors and actors
• Support an UTP-type KNX-bus.
• 1 license for 1 FieldCommander;
no license restrictions for KNX devices.
• Content
• Protocol converter software
• Driver software RS232 adaptor
• NO KNX adapter included.
Using FieldCommander and this software option it is now easy to link your KNX device and visualize the system on a webpage.
Your KNX device can now be integrated with other systems.
Monitor KNX devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free RS232 port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
KNX/EIB protocol converter; NO KNX adaptor;Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
KNX
TCP/IP
EthernetKNX/EIB GSM
PC/PDAI/O
Visualization or remote control
Highlights
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular protocol (european standard Cenelec EN50090international standard ISO/IEC 14543-3.) that is being used in home&building automation.The KNX/EIB software option is a protocol converter, enabling the FieldCommander software to link to KNX/EIB devices.
Applications:Communication• Extend your KNX-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
KNX/EIB converter:software option for FieldCommander
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your KNX device and visualize the system on a webpage.Integration• Your KNX device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor KNX devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free mini-PCI connector is required; HWP10 based.FieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt033 KNX/EIB protocol converter+KNX adaptor miniSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
KNX is a registered trademark of Konnex Association.
Visualization or remote controlKNX/EIB devices
FCopt033
Extra/New
• Communicate with KNX devices
• Support extra functionality to your KNX devices
• Support linking systems
Enable integration
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular
EN50090 and ) that is
The KNX/EIB software option is a protocol converter, enabling the FieldCommander software to link to
device with the FieldCommander communications
software option for FieldCommander® devices compatibleKNXEIB
• Link KNX devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support KNX for sensors and actors
• Support an UTP-type KNX-bus.
• 1 license for 1 FieldCommander;
no license restrictions for KNX devices.
• Content
• Protocol converter software
• Driver software for bus interface
• KNX adapter (interface) included.
Mini-PCI (HWP10) based.
Using FieldCommander and this software option it is now easy to link your KNX device and visualize the system on a webpage.
Your KNX device can now be integrated with other systems.
Monitor KNX devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
PCI connector is required; HWP10 based.
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
KNX/EIB protocol converter+KNX adaptor mini-PCI;Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
KNX
TCP/IP
EthernetKNX/EIB GSM
PC/PDAI/O
Visualization or remote control
Highlights
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular protocol (european standard Cenelec EN50090international standard ISO/IEC 14543-3.) that is being used in home&building automation.The KNX/EIB software option is a protocol converter, enabling the FieldCommander software to link to KNX/EIB devices.
Applications:Communication• Extend your KNX-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
KNX/EIB converter:software option for FieldCommander
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your KNX device and visualize the system on a webpage.Integration• Your KNX device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor KNX devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free ethernet connector is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt034 KNX/EIB protocol converter+KNX IPSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
KNX is a registered trademark of Konnex Association.
Visualization or remote controlKNX/EIB devices
FCopt034
Extra/New
• Communicate with KNX devices
• Support extra functionality to your KNX devices
• Support linking systems
Enable integration
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular
EN50090 and ) that is
The KNX/EIB software option is a protocol converter, enabling the FieldCommander software to link to
device with the FieldCommander communications
software option for FieldCommander® devices compatibleKNXEIB
• Link KNX devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support KNX for sensors and actors
• Support an UTP-type KNX-bus.
• 1 license for 1 FieldCommander;
no license restrictions for KNX devices.
• Content
• Protocol converter software
• Driver software for bus interface
• KNX adapter (ethernet interface) included.
Using FieldCommander and this software option it is now easy to link your KNX device and visualize the system on a webpage.
Your KNX device can now be integrated with other systems.
Monitor KNX devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
KNX/EIB protocol converter+KNX IP-adaptor;Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
KNX
TCP/IP
EthernetKNX/EIB GSM
PC/PDAI/O
Visualization or remote control
Highlights
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular protocol (european standard Cenelec EN50090international standard ISO/IEC 14543-3.) that is being used in home&building automation.The KNX/EIB software option is a protocol converter, enabling the FieldCommander software to link to KNX/EIB devices.
Applications:Communication• Extend your KNX-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
KNX/EIBnet/IP converter:software option for FieldCommander
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your KNX device and visualize the system on a webpage.Integration• Your KNX device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor KNX devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
FieldCommander
Application
visualization
logging
control
iETS
LAN
or
WAN
H
System requirements:Communication• at least 1 free ethernet connector is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt035 KNX/EIBnet/IP protocol converter;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
KNX is a registered trademark of Konnex Association.
KNX/EIB devices
FCopt035
Extra/New
•Support linking PC’s with ETS (EIB Tool Software) configuration software remotely to a KNX/EIB system.
Remote maintenance
• Support checking the KNX/EIB
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular
EN50090 and ) that is
The KNX/EIB software option is a protocol converter, enabling the FieldCommander software to link to
device with the FieldCommander communications
KNX/EIBnet/IP converter:software option for FieldCommander® devices compatible
KNXEIB
• Support checking the KNX/EIB project remotely over internet.
• Support changing the KNX/EIB configyuration remotely over internet.
Extra KNX functionality
• download from ETS remotely over ethernet into KNX project.
• Backup from ETS remotely your KNX-project
• monitor remotely
Support details
• supports the EIBnet/IP client in ETS (also called iETS)
• uses ethernet port address 3671
(is configurable).
• Supports 1x EIBnet/IP client
• supports the FCopt030 interface.
• supports the FCopt031 interface.
• Extra support for NAT (Network Address Translation) is included
• 1 license for 1 FieldCommander
• This option can be used/combined
Using FieldCommander and this software option it is now easy to link your KNX device and visualize the system on a webpage.
Your KNX device can now be integrated with other systems.
Monitor KNX devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
iETS
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
• This option can be used/combined with FDomus also.
• Content
• KNX/EIBnet/IP server software
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
KNX
TCP/IP
EthernetKNX/EIB GSM
PC/PDAI/O
Highlights
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular protocol (european standard Cenelec EN50090international standard ISO/IEC 14543-3.) that is being used in home&building automation.With this option KNX/EIB segments (line or area) of a building automation system can be linked (routed) together over an IP-based communication link, like ethernet or fiber.
Applications: Building Automation
• segments of your KNX/EIB-system can now be linked together
KNX/EIBnet/IP Client:software option for FieldCommander
• segments of your KNX/EIB-system can now be linked together over IP without using line or area couplers.
•Support KNX/EIBnet/IP communication.
LAN or WAN FieldCommander & EIBnet/IP single-client
Floor-2
Floor-1
Central
FieldCommander & EIBnet/IP single-client
FieldCommander & EIBnet/IP multi-server
FCopt036
FCopt036
FCopt037
H
System requirements:Communication• at least 1 interface for KNX is required (eq FCopt030 or FCopt031)
FieldCommander software license
• Use of this software option is restricted to 1 FieldCommander device only.
Order info
FCopt036 EIBnet/IP client for KNX/EIB;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
KNX is a registered trademark of Konnex Association.
FCopt036
Extra/New
•Support linking PC’s with ETS (EIB Tool Software) configuration software remotely to a KNX/EIB system.
Remote maintenance
• Support checking the KNX/EIB
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular
EN50090 and ) that is
With this option KNX/EIB segments (line or area) of a building automation system can be linked (routed)
based communication link, like
system can now be linked together
software option for FieldCommander® devices compatibleKNXEIB
• Support checking the KNX/EIB project remotely over internet.
• Support changing the KNX/EIB configyuration remotely over internet.
Extra KNX functionality
• download from ETS remotely over ethernet into KNX project.
• Backup from ETS remotely your KNX-project
• monitor remotely
Support details
• supports the EIBnet/IP client in ETS (also called iETS)
• uses ethernet port address 3671
(is configurable).
• Supports 1x EIBnet/IP client
• supports the FCopt030 interface.
• supports the FCopt031 interface.
• Extra support for NAT (Network Address Translation) is included
• 1 license for 1 FieldCommander
• This option can be used/combined
system can now be linked together
client
client
server
FCopt036
FCopt036
FCopt037
H
V2010-b
at least 1 interface for KNX is required (eq FCopt030 or FCopt031)
Use of this software option is restricted to 1 FieldCommander device
• This option can be used/combined with FDomus also.
• Content
• KNX/EIBnet/IP client software
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
KNX
TCP/IP
EthernetKNX/EIB GSM
PC/PDAI/O
Highlights
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular protocol (european standard Cenelec EN50090international standard ISO/IEC 14543-3.) that is being used in home&building automation.With this option KNX/EIB segments (line or area) of a building automation system can be linked (routed) together over an IP-based communication link, like ethernet or fiber.
Applications: Building Automation
• segments of your KNX/EIB-system can now be linked together
KNX/EIBnet/IP multi-server:software option for FieldCommander
PRELIMINARY! Available soon
• segments of your KNX/EIB-system can now be linked together over IP without using line or area couplers.
•Support KNX/EIBnet/IP communication.
LAN or WAN FieldCommander & EIBnet/IP single-client
Floor-2
Floor-1
Central
FieldCommander & EIBnet/IP single-client
FieldCommander & EIBnet/IP multi-server
FCopt036
FCopt036
FCopt037
H
System requirements:Communication• at least 1 interface for KNX is required (eq FCopt030 or FCopt031)
FieldCommander software license
• Use of this software option is restricted to 1 FieldCommander device only.
Order info
FCopt037 EIBnet/IP multi-server for KNX/EIB;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
KNX is a registered trademark of Konnex Association.
FCopt037
Extra/New
• Link KNX/EIB segments (areas or lines) together
• Support linking over internet
Integrate; Support IP-all
• Link KNX/EIB segments over IP-communication links to support an
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular
EN50090 and ) that is
With this option KNX/EIB segments (line or area) of a building automation system can be linked (routed)
based communication link, like
system can now be linked together
server:software option for FieldCommander® devices compatible
KNXEIB
PRELIMINARY! Available soon
communication links to support an All-IP communication strategy.
Extra KNX functionality
• no KNX/EIB line/area-couplers needed.
• No dedicated IP couplers needed, just add this option to your FC-based domotica controller.
Support details
• supports EIBnet/IP communication
• uses ethernet port address 3671
(is configurable).
• Supports 1-32x EIBnet/IP client
• Supports the FCopt030 interface
• Supports the FCopt031 interface
• 1 license for 1 FieldCommander
• Can be used with FDomus also.
• Supports area coupling
• Supports line coupling
• Supports KNX/EIB core services
• Supports KNX/EIB routing
system can now be linked together
client
client
server
FCopt036
FCopt036
FCopt037
H
V2010-b
at least 1 interface for KNX is required (eq FCopt030 or FCopt031)
Use of this software option is restricted to 1 FieldCommander device
• Supports KNX/EIB routing
• Supports KNX/EIB tunneling
• Content
• EIBnet/IP multi-server software
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
server for KNX/EIB;Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
KNX
TCP/IP
EthernetKNX/EIB GSM
PC/PDAI/O
Highlights
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular protocol (european standard Cenelec EN50090international standard ISO/IEC 14543-3.) that is being used in home&building automation.With this option KNX/EIB segments (line or area) of a building automation system can be linked (routed) together over an IP-based communication link, like ethernet or fiber.
Applications: Building Automation
• segments of your KNX/EIB-system can now be linked together
KNX/EIBnet/IP multi-client:software option for FieldCommander
PRELIMINARY! Available soon
• segments of your KNX/EIB-system can now be linked together over IP without using line or area couplers.
•Support KNX/EIBnet/IP communication.
LAN or WAN
Group-2
Group-1
Central
FieldCommander & EIBnet/IP multi-client
FCopt038
FCopt036
FCopt036FCopt037
FCopt036
FCopt036FCopt037
H
System requirements:Communication• at least 1 interface for KNX is required (eq FCopt030 or FCopt031)
FieldCommander software license
• Use of this software option is restricted to 1 FieldCommander device only.
Order info
FCopt038 EIBnet/IP multi-client for KNX/EIB;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
KNX is a registered trademark of Konnex Association.
FCopt038
Extra/New
• Link KNX/EIB segments (areas or lines) together
• Support linking over internet
Integrate; Support IP-all
• Link KNX/EIB segments over IP-communication links to support an
KNX (Formerly known as EIB; European Installation Bus and sometimes also being called Instabus) is a popular
EN50090 and ) that is
With this option KNX/EIB segments (line or area) of a building automation system can be linked (routed)
based communication link, like
system can now be linked together
client:software option for FieldCommander® devices compatible
KNXEIB
PRELIMINARY! Available soon
communication links to support an All-IP communication strategy.
Extra KNX functionality
• no KNX/EIB line/area-couplers needed.
• No dedicated IP couplers needed, just add this option to your FC-based domotica controller.
Support details
• supports EIBnet/IP communication
• uses ethernet port address 3671
(is configurable).
• Supports 1-32x EIBnet/IP server
• Supports the FCopt030 interface
• Supports the FCopt031 interface
• 1 license for 1 FieldCommander
• Can be used with FDomus also.
• Supports area coupling
• Supports line coupling
• Supports KNX/EIB core services
• Supports KNX/EIB routing
system can now be linked together
client
FCopt038
H
V2010-b
at least 1 interface for KNX is required (eq FCopt030 or FCopt031)
Use of this software option is restricted to 1 FieldCommander device
• Supports KNX/EIB routing
• Supports KNX/EIB tunneling
• Content
• EIBnet/IP multi-client software
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
KNX
TCP/IP
EthernetKNX/EIB GSM
PC/PDAI/O
Highlights
Remote Data Acquisition(RDA) devices are popular in PC-based test&measurement. The devices are being used in many markets like test & measurement, building automation or in industrial automation. This RDA software option is a protocol converter, enabling the FieldCommander software to link to several product families of RDA devices, like the Adam productfamily.Because these devices are so popular, many other manufacturers developed compatible devices.Applications:Communication• Extend your RDA-device with the FieldCommander communications
RDA (Remote Data Acquisitie) converter:software option for FieldCommander
• Extend your RDA-device with the FieldCommander communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your RDA device and visualize the system on a webpage.Integration• Your RDA device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor RDA devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free RS485 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt040 RDA protocol converter;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
eCER is a trademark of CER International bvAdam is a registered trademark of Advantech Corp. Ltd.NuDam is a registered trademark of Adlink Technology Inc.6B is a trademark of Analog Devices.ICP-Con is a trademark of ICP-DAS Co. Ltd.CB-COM is a trademark of Measurement Computing Corp.Expert is a trademark of TopSCCC Ltd.iDam is a trademark of Axiomtek Co. Ltd.Ndam is a trademark of Nagasaki Ltd.
Visualization or remote controlRDA devices
FCopt040
Extra/New
• Communicate with RDA devices
• Support extra functionality to your RDA devices
• Support linking systems
Enable integration
Remote Data Acquisition(RDA) devices are popular in based test&measurement. The devices are being
used in many markets like test & measurement, building automation or in industrial automation. This RDA software option is a protocol converter, enabling the FieldCommander software to link to several product families of RDA devices, like the Adam productfamily.Because these devices are so popular, many other manufacturers developed compatible devices.
device with the FieldCommander communications
RDA (Remote Data Acquisitie) converter:software option for FieldCommander® devices
• Link RDA devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support eCER 8000 devices
• support Adam4000 devices
• support NuDam 6000 devices
• support 6B devices
• support ICP-Con 7000 modules
• support CB-COM 7000 modules
• support Expert 9000 serie
• support I-Dam 7000 series
• support NDam 7000 series
• Content
• Driver software
• Protocol converter software
• RDA-module NOT included
device with the FieldCommander communications
Using FieldCommander and this software option it is now easy to link your RDA device and visualize the system on a webpage.
Your RDA device can now be integrated with other systems.
Monitor RDA devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
•
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
IEEE802.15.4 (also referred to as ZigBee) is a young protocol that is created to support low-power wireless sensors used in home&building automation.The ZigBee software option is a protocol converter, enabling the FieldCommander software to link to ZigBee devices.
Applications:Communication• Extend your ZigBee-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
ZigBee converter:software option for FieldCommander
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your ZigBee device and visualize the system on a webpage.Integration• Your ZigBee device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor ZigBee devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free USB port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt050 ZigBee protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
ZigBee is a registered trademark of ZigBee Alliance.
Visualization or remote controlZigBee devices
FCopt050
Extra/New
• Communicate with ZigBee devices
• Support extra functionality to your ZigBee devices
• Support linking systems
Enable integration
IEEE802.15.4 (also referred to as ZigBee) is a young power wireless
sensors used in home&building automation.The ZigBee software option is a protocol converter, enabling the FieldCommander software to link to ZigBee
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
• Link ZigBee devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support ZigBee for sensors and actors
• Supports ZigBee bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for ZigBee devices.
• Content
• Protocol converter software
• Driver software RS232 adaptor
• ZigBee adapter (interface) included.
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your ZigBee device and visualize the system on a webpage.
Your ZigBee device can now be integrated with other systems.
Monitor ZigBee devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
FieldCommander app. FC
Application Framework
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
ZigBee
IEEEPHY layerMAC layer
Network/Security layers
Application Framework
Highlights
Remote control and wireless communication is popular.This software option supports FieldCommander to communication GSM/GPRS based and to send or receive SMS-messages.
Applications:Communication• Extend your local-devices with the FieldCommander GSM/GPRS communication.
GSM/GPRS/SMS converter:software option for FieldCommander
Free; included in FC sw advanced
communication.Visualization• Using FieldCommander and this software option it is now easy to link your local devices and visualize the system on a remote webpage.Integration• Your localdevice can now be integrated with other systems.Monitoring, alerting and reporting• Monitor local devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
FieldCommander
Application
visualization
logging
control
Remote Visualization or control
FCoptGSM1
H
System requirements:Communication• at least 1 free RS232 port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt060 GSM/GPRS protocol interfaceSoftware option for FieldCommander devices.
FCoptGSM1 FieldCommander option: GSM/GPRS modem.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
.
FCopt060
Extra/New
• Communicate with GSM/GPRS modem.
• Support extra functionality to your FieldCommander applications
• Support linking remote systems systems
Remote control and wireless communication is popular.This software option supports FieldCommander to communication GSM/GPRS based and to send or receive
devices with the FieldCommander GSM/GPRS
GSM/GPRS/SMS converter:software option for FieldCommander® devices
Free; included in FC sw advanced
Enable integration
• Link local FieldCommander devices to central services.
• FieldCommander can be your gateway to other systems
GSM/GPRS provides extra
functionality
• communicatie with external units via GSM/GPRS
• simulation absence
• implement time synchronisation
• flexible timeswitching device
• replace logic modules
• energy limit controller
Support details
• supports AT commands of ETSI standard GSM 07.07 or SMS 07.05 compatible modems
• 1 license for use with 1
Using FieldCommander and this software option it is now easy to link your local devices and visualize the system on a remote
Your localdevice can now be integrated with other systems.
Monitor local devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
Remote Visualization or control
H
V2010-b
at least 1 free RS232 port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
• 1 license for use with 1 FieldCommander device.
• Content
• Protocol converter software
• Driver software
• GSM modem NOT included in software.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.FieldCommander option: GSM/GPRS modem.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Highlights
An iButton device is a small and lowcost piece of electronics that is factory lasered with an unique 48serial number. The iButton devices are being used in many markets like building automation and very popular in security applications.To read the iButton, an iButton reader is required.This iButton sw option is a protocol converter, enabling the FieldCommander to link to iButton reader devices.
Applications:Communication• Extend your iButton-device with the FieldCommander
iButton /1-wire converter:software option for FieldCommander
• Extend your iButton-device with the FieldCommander communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your iButton device and visualize the system on a webpage.Integration• Your iButton device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor iButton devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
iButton devices
H
System requirements:Communication• at least 1 free RS485 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt110 iButton protocol converter;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
iButton is a registered trademark of Dallas Semiconductor.
Visualization or remote control
FCopt110
Extra/New
• Communicate with iButton devices
• Support extra functionality to your iButton devices
• Support linking systems
Enable integration
An iButton device is a small and lowcost piece of electronics that is factory lasered with an unique 48-bit serial number. The iButton devices are being used in many markets like building automation and very
To read the iButton, an iButton reader is required.This iButton sw option is a protocol converter, enabling the FieldCommander to link to iButton reader devices.
device with the FieldCommander
wire converter:software option for FieldCommander® devices
Enable integration
• Link iButton devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support 1-Wire devices
• support iButton devices
• 1 license for 1 FieldCommander; no license restrictions for CrossPoint devices.
• Content
• 1-Wire Adaptor
• Driver software
• Protocol converter software
• NO iButton reader included
• NO iButtons included
•
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your iButton device and visualize the system on a webpage.
Your iButton device can now be integrated with other systems.
Monitor iButton devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
•
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
RFID is a young protocol that is created to support lowpower wireless sensors used in home&building automation.The CrossPoint software option is a protocol converter, enabling the FieldCommander software to link to CrossPoint devices; like the whristtag-locator or the XM13.56 mifare reader/writer.
Applications:Communication• Extend Crosspoint-devices with the FieldCommander communications options, like email; FTP; SMS or remote control.
RFID: Crosspoint converter:software option for FieldCommander
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your Crosspoint devices and visualize the system on a webpage.Integration• Your Crosspoint device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor Crosspoint devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
Crosspoint devices
H
System requirements:Communication• at least 1 free RS485 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt120 Crosspoint protocol converter;Software option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Crosspoint is a registered trademark of Crosspoint bv;.
Visualization or remote control
FCopt120
Extra/New
• Communicate with Crosspoint devices
• Support extra functionality to your Crosspoint devices
• Support linking systems
Enable integration
RFID is a young protocol that is created to support low-power wireless sensors used in home&building
The CrossPoint software option is a protocol converter, enabling the FieldCommander software to link to
locator or the
devices with the FieldCommander communications options, like email; FTP; SMS or remote control.
RFID: Crosspoint converter:software option for FieldCommander® devices
Enable integration
• Link Crosspoint devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support Crosspoint devices
• 1 license for 1 FieldCommander; no license restrictions for CrossPoint devices.
• Content
• Crosspoint Max Adaptor
• Driver software
• Protocol converter software
• NO Crosspoint devices included
•
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your Crosspoint devices and visualize the system on a webpage.
Your Crosspoint device can now be integrated with other systems.
Monitor Crosspoint devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
RFID is a young technology, created to support lowpower but active wireless tags used in security automation.This software option is a protocol converter, enabling the FieldCommander software to link to Wavetrend RFID devices.
Applications:Communication• Extend your RFID-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
RFID: Wavetrend converter:software option for FieldCommander
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your RFID device and visualize the system on a webpage.Integration• Your RFID device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor RFID devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free RS485 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt130 RFID: Wavetrend protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Wavetrend is a registered trademark of Wavetrend Technologies.
Visualization or remote controlRFID active sensors
FCopt130
Extra/New
• Communicate with RFID devices
• Support extra functionality to your RFID devices
• Support linking systems
Enable integration
RFID is a young technology, created to support low-power but active wireless tags used in security
This software option is a protocol converter, enabling the FieldCommander software to link to Wavetrend RFID
device with the FieldCommander communications
RFID: Wavetrend converter:software option for FieldCommander® devices
• Link RFID devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support RFID for sensors and actors
• Supports RFID bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for RFID devices.
• Content
• Protocol converter software
• Driver software
• RFID adapter (interface) included.
Using FieldCommander and this software option it is now easy to link your RFID device and visualize the system on a webpage.
Your RFID device can now be integrated with other systems.
Monitor RFID devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
RFID: Wavetrend protocol converterSoftware option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Wavetrend is a registered trademark of Wavetrend Technologies.
Visualization or remote control
RX201 reader
Highlights
EnOcean is a RF protocol for battery-less switches and sensors based on the EnOcean (868MHz) technology.This software option is a protocol converter, enabling the FieldCommander software to link(receive or send) to EnOcean devices. Other companies created compatible devices like Ratio (Omnio), EasyClick(Peha), Sensolux (Peha), gesis RC(Wieland), EasySens, (Thermokon), Steute, Balluf and Osram.
Applications:Communication
• Extend your EnOcean-sensor with the FieldCommander
EnOcean-RF:software option for FieldCommander
• Extend your EnOcean-sensor with the FieldCommander communications options, like email; FTP; SMS or remote control.
Visualization
• Using FieldCommander and this software option it is now easy to link your EnOcean devices and visualize the system on a webpage.Integration
• your EnOcean system can now be integrated with other systems.
Monitoring, alerting and reporting
• monitor EnOcean and extend EnOcean devices to alerting and reporting possibilities using the FieldCommander technology.
FieldCommander script
• script example included
• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
Wireless+batteryless sensors
RF 868MHz
<300m
H
System requirements:Communication• at least 1 free RS232 communication port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt151/x EnOcean protocol converter; FieldCommander Optionx=2 (RS232), x=4(RS485) or x=U for USB
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
EnOcean is a registered trademark of EnOcean GmbH.EasyClick is a trademark of Niko nv and Peha.Sensolux is a trademark of Peha.Ratio is a registerd trademark of Omnio AGGesis RC is a trademark of Wieland Electric GmbHEasySens is a registered trademark of Thermokon SensorTechnik GmbH
Visualization or remote controlEnOcean devices
FCopt151
Extra/New
• Communicate with EnOcean or Easyclick, Ratio or EasySens devices
• Support extra functionality to your EnOcean devices
• Support linking systems
less switches and sensors based on the EnOcean (868MHz) technology.This software option is a protocol converter, enabling the FieldCommander software to link(receive or send) to EnOcean devices. Other companies created compatible devices like Ratio (Omnio), EasyClick(Peha), Sensolux (Peha), gesis RC(Wieland), EasySens,
sensor with the FieldCommander
software option for FieldCommander® devices
Enable integration
• Link EnOcean devices to all other kind of devices the FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support EnOcean sensors and actors
• supports EnOcean bidirectional.
• supports max 128 addresses
• 1 license for 1 FieldCommander;
no license restrictions for EnOcean devices.
• Content
• Protocol converter software
• Driver software
• EnOcean adapter(transceiver) included (available in RS232;
sensor with the FieldCommander communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your EnOcean devices and visualize the system on a webpage.
your EnOcean system can now be integrated with other systems.
monitor EnOcean and extend EnOcean devices to alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free RS232 communication port is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
included (available in RS232; RS485 or USB version)
• No Power supply included (only needed in RS232 or RS485 version)
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
EnOcean protocol converter; FieldCommander Optionx=2 (RS232), x=4(RS485) or x=U for USB-version
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
EasySens is a registered trademark of Thermokon SensorTechnik GmbH
Visualization or remote control
Highlights
EnOcean is a RF protocol for battery-less switches and sensors based on the EnOcean (868MHz) technology.This software option is a protocol converter, enabling the FieldCommander software to link(receive or send) to EnOcean devices. Other companies created compatible devices like Ratio (Omnio), EasyClick(Peha), Sensolux (Peha), gesis RC(Wieland), EasySens, (Thermokon), Steute, Balluf and Osram.
Applications:Communication
• Extend your EnOcean-sensor with the FieldCommander
EnOcean-RF:software option for FieldCommander
• Extend your EnOcean-sensor with the FieldCommander communications options, like email; FTP; SMS or remote control.
Visualization
• Using FieldCommander and this software option it is now easy to link your EnOcean devices and visualize the system on a webpage.Integration
• your EnOcean system can now be integrated with other systems.
Monitoring, alerting and reporting
• monitor EnOcean and extend EnOcean devices to alerting and reporting possibilities using the FieldCommander technology.
FieldCommander script
• script example included
• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
Wireless+batteryless sensors
RF 868MHz
<300m
H
System requirements:Communication• at least 1 free RS232 communication port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt152 EnOcean protocol converter; FieldCommander Option.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
EnOcean is a registered trademark of EnOcean GmbH.EasyClick is a trademark of Niko nv and Peha.Sensolux is a trademark of Peha.Ratio is a registerd trademark of Omnio AGGesis RC is a trademark of Wieland Electric GmbHEasySens is a registered trademark of Thermokon SensorTechnik GmbH
Visualization or remote controlEnOcean devices
FCopt152
Extra/New
• Communicate with EnOcean or Easyclick, Ratio or EasySens devices
• Support extra functionality to your EnOcean devices
• Support linking systems
less switches and sensors based on the EnOcean (868MHz) technology.This software option is a protocol converter, enabling the FieldCommander software to link(receive or send) to EnOcean devices. Other companies created compatible devices like Ratio (Omnio), EasyClick(Peha), Sensolux (Peha), gesis RC(Wieland), EasySens,
sensor with the FieldCommander
software option for FieldCommander® devices
Enable integration
• Link EnOcean devices to all other kind of devices the FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support EnOcean sensors and actors
• supports EnOcean bidirectional.
• supports max 128 addresses
• 1 license for 1 FieldCommander;
no license restrictions for EnOcean devices.
• Content
• Protocol converter software
• Driver software
• EnOcean adapter(transceiver) is required but NOT included.
sensor with the FieldCommander communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your EnOcean devices and visualize the system on a webpage.
your EnOcean system can now be integrated with other systems.
monitor EnOcean and extend EnOcean devices to alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free RS232 communication port is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
required but NOT included.
• No power supply included.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
EnOcean protocol converter; FieldCommander Option.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
EasySens is a registered trademark of Thermokon SensorTechnik GmbH
Visualization or remote control
Highlights
EnOcean is a RF protocol for battery-less switches and sensors based on the EnOcean (868MHz) technology.This software option is a protocol converter, enabling the FieldCommander software to link(receive or send) to EnOcean devices. Other companies created compatible devices like Ratio (Omnio), EasyClick(Peha), Sensolux (Peha), gesis RC(Wieland), EasySens, (Thermokon), Steute, Balluf and Osram.
Applications:Communication
• Extend your EnOcean-sensor with the FieldCommander
Transceiver gateway for EnOcean
• Extend your EnOcean-sensor with the FieldCommander communications options, like email; FTP; SMS or remote control.
Visualization
• Using FieldCommander and this software option it is now easy to link your EnOcean devices and visualize the system on a webpage.Integration
• your EnOcean system can now be integrated with other systems.
Monitoring, alerting and reporting
• monitor EnOcean and extend EnOcean devices to alerting and reporting possibilities using the FieldCommander technology.
FieldCommander script
• script example included
• support for many dedicated FieldCommander functions included.
Wireless+batteryless sensors
RF 868MHz
<300m
Transceiver gateway
H
System requirements:Communication• at least 1 free RS232 communication port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt153/x EnOcean gateway; bidirectional transceiverx=2 (RS232), x=4(RS485) or x=U for USB
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
EnOcean is a registered trademark of EnOcean GmbH.EasyClick is a trademark of Niko nv and Peha.Sensolux is a trademark of Peha.Ratio is a registerd trademark of Omnio AGGesis RC is a trademark of Wieland Electric GmbHEasySens is a registered trademark of Thermokon SensorTechnik GmbH
EnOcean devices
Transceiver gateway
FCopt153
Extra/New
• Communicate with EnOcean or Easyclick, Ratio or EasySens devices
• Support extra functionality to your EnOcean devices
• Support linking systems
less switches and sensors based on the EnOcean (868MHz) technology.This software option is a protocol converter, enabling the FieldCommander software to link(receive or send) to EnOcean devices. Other companies created compatible devices like Ratio (Omnio), EasyClick(Peha), Sensolux (Peha), gesis RC(Wieland), EasySens,
sensor with the FieldCommander
Transceiver gateway for EnOcean-RF
Enable integration
• Link EnOcean devices to all other kind of devices the FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support EnOcean sensors and actors
• supports EnOcean bidirectional.
• supports max 128 addresses
• 1 license for 1 FieldCommander;
no license restrictions for EnOcean devices.
• Content
• Protocol converter software
• Driver software
• EnOcean adapter(transceiver) included (available in RS232;
sensor with the FieldCommander communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your EnOcean devices and visualize the system on a webpage.
your EnOcean system can now be integrated with other systems.
monitor EnOcean and extend EnOcean devices to alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
RS232
or
RS485
or
USB
H
V2010-b
at least 1 free RS232 communication port is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
included (available in RS232; RS485 or USB version)
• No Power supply included (only needed in RS232 or RS485 version)
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
EnOcean gateway; bidirectional transceiverx=2 (RS232), x=4(RS485) or x=U for USB-version
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
EasySens is a registered trademark of Thermokon SensorTechnik GmbH
Highlights
ESPA (4.4.4) is a protocol for communication with pager systems.This software option is a protocol converter, enabling the FieldCommander software to communicate with pager systems based on the ESPA 4.4.4 communication protocol.
Applications:Communication• Extend your ESPA-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
ESPA converter:software option for FieldCommander
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your ESPA device and visualize the system on a webpage.Integration• Your ESPA device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor XXX devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
ESPA
H
System requirements:Communication• at least 1 free RS232 or RS485 communication port is required (depending on you pager controller)FieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt160 ESPA protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
ESPA 4.4.4 is a standard protocol adopted by theEuropean Selective Paging Manufacturers Associacion.
FieldCommander
FCopt160
Extra/New
• Send communication to ESPA compatible pager systems
• Receive communication from ESPA systems like fire alarms.
Enable integration
ESPA (4.4.4) is a protocol for communication with pager
This software option is a protocol converter, enabling the FieldCommander software to communicate with pager systems based on the ESPA 4.4.4 communication
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
• Link ESPA pager devices to all other kind of devices the FieldCommander is supporting. FieldCommander can be your gateway to other systems
Extra ESPA functionality
• can be used for output to pager systems
• can be used for input from ESPA compatible systems
Support details
• support ESPA devices
• 1 license for 1 FieldCommander; no license restrictions for the pager devices.
• Tested with Bosch(Philips) DP6000
• Tested with Blick Aquarius
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your ESPA device and visualize the system on a webpage.
Your ESPA device can now be integrated with other systems.
Monitor XXX devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free RS232 or RS485 communication port is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
• Content
• Protocol converter software
• Driver software
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Highlights
Kadex is a system for switches and sensors based on the wireless RF(868.3MHz) technology.This software option is a protocol converter, enabling the FieldCommander software to send/receive commands to/from Kadex devices.
Applications:Communication• Extend your Kadex-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
Kadex-RF converter:software option for FieldCommander
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your Kadex device and visualize the system on a webpage.Integration• Your Kadex device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor Kadex devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free RS232 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt170 Kadex-RF protocol RS232 converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Kadex is a registered trademark of Kadex GmbH.
Visualization or remote controlKadex devices
FCopt170
Extra/New
• Communicate with Kadex-RF devices
• Support extra functionality to your Kadex-RF devices
• Support linking systems
Enable integration
Kadex is a system for switches and sensors based on
This software option is a protocol converter, enabling the FieldCommander software to send/receive
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
Enable integration
• Link Kadex-RF devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support Kadex-RF for sensors and actors
• Supports Kadex-RF bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for Kadex-RF devices.
• Content
• Protocol converter software
• Driver software
• Kadex adapter (interface) included.
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your Kadex device and visualize the system on a webpage.
Your Kadex device can now be integrated with other systems.
Monitor Kadex devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
Kadex is a system for switches and sensors based on the wireless RF(868.3MHz) technology.This software option is a protocol converter, enabling the FieldCommander software to send/receive commands to/from Kadex devices.
Applications:Communication• Extend your Kadex-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
Kadex-RF converter:software option for FieldCommander
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your Kadex device and visualize the system on a webpage.Integration• Your Kadex device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor Kadex devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• communication is IP basedFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt175 Kadex-RF protocol TCP/IP converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Kadex is a registered trademark of Kadex GmbH.
Visualization or remote controlKadex devices
FCopt175
Extra/New
• Communicate with Kadex-RF devices
• Support extra functionality to your Kadex-RF devices
• Support linking systems
Enable integration
Kadex is a system for switches and sensors based on
This software option is a protocol converter, enabling the FieldCommander software to send/receive
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
Enable integration
• Link Kadex-RF devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support Kadex-RF for sensors and actors
• Supports Kadex-RF bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for Kadex-RF devices.
• Content
• Protocol converter software
• Driver software
• Kadex adapter (interface) included.
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your Kadex device and visualize the system on a webpage.
Your Kadex device can now be integrated with other systems.
Monitor Kadex devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
X10 is a system for devices and sensors based on the X10 Powerline communication technology. X10 is a powerline based communication which is actually an improved version of X10. This software option is a protocol converter, enabling the FieldCommander software to send/receive commands to/from X10 devices.
Applications:Communication• Extend your X10-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
X10 converter:software option for FieldCommander
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your X10 device and visualize the system on a webpage.Integration• Your X10 device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor X10 devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
X10
PLC
H
System requirements:Communication• at least 1 free RS232 port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt180 X10 protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
X10 is a trademark of xc bv.
Visualization or remote controlX10 devices
FCopt180
Extra/New
• Communicate with X10 devices
• Support extra functionality to your X10 devices
• Support linking systems
Enable integration
X10 is a system for devices and sensors based on the X10 Powerline communication technology. X10 is a powerline based communication which is actually an improved version of X10. This software option is a protocol converter, enabling the FieldCommander software to send/receive commands to/from X10
device with the FieldCommander communications
software option for FieldCommander® devices
• Link X10 devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support X10 for sensors and actors
• Supports X10 bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for X10 devices.
• Content
• Protocol converter software
• Driver software
• CM11 adapter is required but NOT included.
Using FieldCommander and this software option it is now easy to link your X10 device and visualize the system on a webpage.
Your X10 device can now be integrated with other systems.
Monitor X10 devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free RS232 port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
A10 is a system for devices and sensors based on the A10 Powerline communication technology. A10 is a powerline based communication which is actually an improved version of A10. This software option is a protocol converter, enabling the FieldCommander software to send/receive commands to/from A10 devices.
Applications:Communication• Extend your A10-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
A10(Xanura) converter:software option for FieldCommander
PRELIMINARY! Available soon
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your A10 device and visualize the system on a webpage.Integration• Your A10 device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor A10 devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
A10
PLC
H
System requirements:Communication• at least 1 free RS232 port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt185 A10 protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
A10 is a trademark of Advantech Control Technologies Inc.Xanura is a trademark of Eaton Holec bv.
Visualization or remote controlA10 devices
FCopt185
Extra/New
• Communicate with X10 devices
• Support extra functionality to your A10 devices
• Support linking systems
Enable integration
A10 is a system for devices and sensors based on the A10 Powerline communication technology. A10 is a powerline based communication which is actually an improved version of A10. This software option is a protocol converter, enabling the FieldCommander software to send/receive commands to/from A10
device with the FieldCommander communications
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Link A10 devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support A10 for sensors and actors
• Supports A10 bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for X10 devices.
• Content
• Protocol converter software
• Driver software
• CTX35 adapter is required but NOT included.
Using FieldCommander and this software option it is now easy to link your A10 device and visualize the system on a webpage.
Your A10 device can now be integrated with other systems.
Monitor A10 devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free RS232 port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
A10 is a trademark of Advantech Control Technologies Inc.
Visualization or remote control
Highlights
Xcomfort is a system for devices and sensors based on a wireless RF(868.3 MHz) communication technology.
This software option is a protocol converter, enabling the FieldCommander software to send/receive commands to/from Xcomfort device.
Applications:Communication• Extend your XComfort-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
XComfort converter:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your XComfort device and visualize the system on a webpage.Integration• Your XComfort device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor XComfort devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free RS232 port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt190 XComfort protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Visualization or remote controlXComfort devices
XComfort is a registered trademark of Moeller GmbH.
FCopt190
Extra/New
• Communicate with XComfort devices
• Support extra functionality to your XComfort devices
• Support linking systems
Enable integration
Xcomfort is a system for devices and sensors based on a wireless RF(868.3 MHz) communication technology.
This software option is a protocol converter, enabling the FieldCommander software to send/receive
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
Enable integration
• Link XComfort devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support XComfort for sensors and actors
• Supports XComfort bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for XComfort devices.
• Content
• Protocol converter software
• Driver software
• CRSZ adapter (interface) NOT included.
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your XComfort device and visualize the system on a webpage.
Your XComfort device can now be integrated with other systems.
Monitor XComfort devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free RS232 port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
Serial I/O over IP, also called ‘Remote COM port’, extends the FieldCommander software in supporting serial device servers as an extra -but virtualThe extra COM port is connected (redirected) using ethernet and can be miles away.This software option allows FieldCommander to gain almost an unlimited number of serial ports
Applications• Communication, messagingCommunication• a FieldCommander controller can now be linked with VOIP
SoIP; Serial over IP:software option for FieldCommander
• a FieldCommander controller can now be linked with VOIP telephone devices.Integration• Digital VoIP telephones can now easily be integrated.Monitoring, alerting and reporting• monitor VOIP communication using the FieldCommander technology.FieldCommander script• FCscript example included.
Serial input/output over IP to FieldCommander
LAN or WANControllers
Paging system
Measurement device
Building System
Serial device server
FieldCommander
H
System requirements:Communication• requires NO serial fieldbus communication port; only ethernet required.FieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt210 SoIP serial protocol layer; FieldCommander Optionmax. 4 external devices.
FCopt211 SoIP serial protocol layer; FieldCommander Optionmax. 8 external devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Moxa is a trademark of Moxa Technologies Co. Ltd.
FCopt210
Extra/New
• Extra COM port on FieldCommander linked remotely via LAN/ethernet.
• RS232, RS422 or RS485, depending on the type of serial device server
Enable integration
Serial I/O over IP, also called ‘Remote COM port’, extends the FieldCommander software in supporting
but virtual- COM-port. The extra COM port is connected (redirected) using
This software option allows FieldCommander to gain
a FieldCommander controller can now be linked with VOIP
software option for FieldCommander® devices
• Link serial devices to the FieldCommander controller for extra serial ports or for gateway applications
Extra functionality
• support remote control
• link to alarm station
Support details
• supports Moxa DE211/311 device
• supports Moxa Nport 4511 device
• supports Moxa Nport 5xxx device
• supports Moxa Nport W2xxx dev.
• supports Aport 211 devices
• 1 license for 1 FieldCommander
• Content
• Protocol layer software
• Configuration script included
a FieldCommander controller can now be linked with VOIP
Digital VoIP telephones can now easily be integrated.
monitor VOIP communication using the FieldCommander
Controllers
Paging system
Measurement device
Building System
H
V2010-b
requires NO serial fieldbus communication port; only ethernet required.
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
• Configuration script included
• Serial device server NOT included
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
SoIP serial protocol layer; FieldCommander Option
SoIP serial protocol layer; FieldCommander Option
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Serial servers supported by SoIP
Highlights
VoIP is the new generation of digital, IP-based, telephone communication. This FieldCommander option support the Open SIP-standard for Voice over IP.
This option requires a FieldCommander model with audio-In and audio-Out connection.
This software option requires a SIP-server system, which can be located somewhere in the network environment.
Applications
VoIP; SIP-based Voice over IP phone supportsoftware option for FieldCommander
Applications• Communication, messagingCommunication• a FieldCommander controller can now be linked with VOIP telephone devices.Integration• Digital VoIP telephones can now easily be integrated.Monitoring, alerting and reporting• monitor VOIP communication using the FieldCommander technology.FieldCommander script• FCscript example included.
Voice over IP to/from FieldCommander
LAN or WAN
External audio
FieldCommander
Internal audioVoIP phones
H
System requirements:Communication• requires NO serial fieldbus communication port; only ethernet required.FieldCommander software• 1 free convertercomponent in your FieldCommander software for each channel is required . FCopt220 requires audio support FC v4.
Order info
FCopt220 VoIP support(SIP based)&audio; FieldCommander OptionFCopt221 SIP signaling interface; FieldCommander OptionFCopt222 SIP Signaling & Call Transfer; FieldCommander OptionFCopt223 SIP Extended (opt222+PlaySound); FC Option
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
SIP (Session Initiation Protocol) is a standard from the IETF (Internet Engineering Task Force) organization.
FCopt220
Extra/New
• Convert normal audio into VOIP
• Generate VOIP compatible audio
• Communicate with VOIP devices.
Enable integration
• Link audio devices and link to
based, telephone communication. This FieldCommander option
standard for Voice over IP.
This option requires a FieldCommander model with
server system, which can be located somewhere in the network
based Voice over IP phone supportsoftware option for FieldCommander® devices
• Link audio devices and link to VOIP telephones for communication.
Extra functionality
• support DTMF(RTP)
•
Support details
• optional product for FieldCommander devices
• supports SIP phones.
• SIP phones have small differences depending of phone manufacturer.
• 1 license for 1 FieldCommander
• Content
• Driver software
• Configuration script sample included
• VoIP(SIP) phones NOT included
a FieldCommander controller can now be linked with VOIP
Digital VoIP telephones can now easily be integrated.
monitor VOIP communication using the FieldCommander
Voice over IP to/from FieldCommander
Audio-In
Audio-Out
Messaging
DTMF
IVR
External audio
Internal audio
H
V2010-b
requires NO serial fieldbus communication port; only ethernet required.
1 free convertercomponent in your FieldCommander software for each channel is required . FCopt220 requires audio support FC v4.
• VoIP(SIP) phones NOT included
• SIP-server NOT included.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
VoIP support(SIP based)&audio; FieldCommander OptionSIP signaling interface; FieldCommander OptionSIP Signaling & Call Transfer; FieldCommander OptionSIP Extended (opt222+PlaySound); FC Option
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Tested with:
3Com VCX
Digium's Asterisk
Cisco's Call Mngr Exp. 4
SIP (Session Initiation Protocol) is a standard from the IETF (Internet
Pictures group; can be ungrouped
Paging; VoIP(SIP) based; with PoE
FieldCommander VoIP (SIP) telephones
Lan/Internet
SIP Wall/Ceiling Speakers (8 Watt)
FieldCommander as paging server LAN network
Paging; VoIP(SIP); amplifier for analog speakers
FieldCommander as VoIP clientLAN network
Paging; VoIP(SIP); SIP intercoms
H
FieldCommander LAN network
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Paging; VoIP(SIP) based; with
VoIP (SIP) telephones
CER CER
SIP Wall/Ceiling Speakers (8 Watt)
FCopt220
LAN network
Paging; VoIP(SIP); amplifier for analog
FieldCommander as VoIP client
Analog Speakers
AMP
Paging; VoIP(SIP); SIP intercomsSIP Panel Mount intercoms
H
V2010-b
LAN network
SIP Panel Mount intercoms
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Highlights
GPIO protocol that is created to support lowwireless sensors used in home&building automation.The GPIO software option is a protocol converter, enabling the FieldCommander software to link to the GPIO connections.
Applications:Communication• Extend your GPIO connector with the FieldCommander communications options, like email; FTP; SMS or remote control.
GPIO; General purpose I/O converter:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your GPIO connector and visualize the system on a webpage.Integration• Your GPIO connector can now be integrated with other systems.Monitoring, alerting and reporting• Monitor GPIO connector and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
GPIO connector
H
System requirements:Communication• no communication port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt230 GPIO protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Visualization or remote control
FCopt230
Extra/New
• Communicate with the GPIO connections
• Support extra functionality to your GPIO connections
• Support linking systems
Enable integration
GPIO protocol that is created to support low-power wireless sensors used in home&building automation.The GPIO software option is a protocol converter, enabling the FieldCommander software to link to the
Extend your GPIO connector with the FieldCommander communications options, like email; FTP; SMS or remote control.
GPIO; General purpose I/O converter:software option for FieldCommander® devices
PRELIMINARY! Available soon
Enable integration
• Link GPIO connector to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support GPIO sensors and actors
• 1 license for 1 FieldCommander;
no license restrictions for GPIO devices.
• Content
• Protocol converter software
• Driver software
•
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your GPIO connector and visualize the system on a webpage.
Your GPIO connector can now be integrated with other systems.
Monitor GPIO connector and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
I2C is a communicationprotocol for devices and sensors based on a 2 wire communication technology.This software option is a protocol converter, enabling the FieldCommander software to send/receive commands to/from I2C devices.
Applications:Communication• Extend your I2C -device with the FieldCommander communications options, like email; FTP; SMS or remote control.
I2C converter:software option for FieldCommander
PRELIMINARY! Available soon
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your I2C device and visualize the system on a webpage.Integration• Your I2C device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor I2C devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
I2C connector
H
System requirements:Communication• use of hardware platform 10 is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt240 I2C protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Visualization or remote control
FCopt240
Extra/New
• Communicate with I2C devices
• Support extra functionality to your I2C devices
• Support linking systems
Enable integration
C is a communicationprotocol for devices and sensors based on a 2 wire communication technology.This software option is a protocol converter, enabling the FieldCommander software to send/receive
device with the FieldCommander communications
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Link I2C devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support I2C for sensors and actors
• Supports I2C bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for I2C devices.
• Content
• Protocol converter software
• Driver software
•.
Using FieldCommander and this software option it is now easy to C device and visualize the system on a webpage.
C device can now be integrated with other systems.
C devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
DMX512 is a popular protocol to control lighting systems or projectors for concerts, theatres or museum. DMX512 is also often being used to control modern LED lighting equipment in buildings like casino’s, hotels or disco.This software option is a protocol converter, enabling the FieldCommander software to send/receive commands to DMX512 devices.
Applications:Communication• Extend your DMX512-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
DMX512 converter:software option for FieldCommander
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your DMX512 device and visualize the system on a webpage.Integration• Your DMX512 device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor DMX512 devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
FieldCommander
DMX512
H
System requirements:Communication• at least 1 free USB port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt250 DMX512 protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
FieldCommander
DMX512 is a USITT(1990) communication standard for connectinga single controlling source (master) to multiple receivers linking upto 512 devices (or functions) over cables max. 1 km.
FCopt250
Extra/New
• Communicate with DMX512 devices
• Support extra functionality to your DMX512 devices
• Support linking systems
Enable integration
DMX512 is a popular protocol to control lighting systems or projectors for concerts, theatres or museum. DMX512 is also often being used to control modern LED lighting equipment in buildings like
This software option is a protocol converter, enabling the FieldCommander software to send/receive
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
Enable integration
• Link DMX512 devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support DMX512 for sensors and actors
• Supports DMX512 bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for DMX512 devices.
• Content
• Protocol converter software
• Driver software
• DMX512 adapter (interface) included.
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your DMX512 device and visualize the system on a webpage.
Your DMX512 device can now be integrated with other systems.
Monitor DMX512 devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free USB port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
DMX512 is a USITT(1990) communication standard for connectinga single controlling source (master) to multiple receivers linking upto 512
H H
V2010-b
Highlights
NTA 8130 is dutch protocol for “slimme energie meters” (smart energy meters). FCopt260 is an option, enabling a FieldCommander controller to be linked to the P1 connector of these smart energy meters.With this software option FieldCommander can display the energy messages of the power company and can display/process the energy values.
Applications:Communication• Extend your AMR-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
NTA 8130P1: link to smart energy meters:software option for FieldCommander
PRELIMINARY! Available soon
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your AMR device and visualize the system on a webpage.Integration• Your AMR device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor AMR devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
FieldCommander
NTA 8130
NEN62056-21
Domotica systems:
KNX/EIB/X10/ZigBee
H
System requirements:Communication• at least 1 free RS232 port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt260 NTA8130 P1 protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
NTA8130P1 is a communication standard for connectingan AMR (Automatic Meter Reader) to a domotica application.
FieldCommander
FCopt260
Extra/New
• Communicate with NTA8130 based AMR equipment
• Support extra functionality to your AMR devices
• Support linking systems
Enable integration
NTA 8130 is dutch protocol for “slimme energie meters” (smart energy meters). FCopt260 is an option, enabling a FieldCommander controller to be linked to the P1
With this software option FieldCommander can display the energy messages of the power company and can
device with the FieldCommander communications
NTA 8130P1: link to smart energy meters:software option for FieldCommander® devices
PRELIMINARY! Available soon
Enable integration
• Link AMR devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support 1 smart energy meter
• support the P1 AMR-connector.
• 1 license for 1 FieldCommander; no license restrictions for NTA8130 devices
• Content
• Protocol converter software
• Driver software
• 1 adaptor with NTA8130P1-RJ11 plug.
Using FieldCommander and this software option it is now easy to link your AMR device and visualize the system on a webpage.
Your AMR device can now be integrated with other systems.
Monitor AMR devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
Internet
H
V2010-b
at least 1 free RS232 port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
an AMR (Automatic Meter Reader) to a domotica application.
HighlightsOpenTherm started as a protocol to communicate between a thermostat and a central heating system. Today OpenTherm can also be used for communication with ventilation or airco systems.With FCopt270 a FieldCommander controller can easily communicate with your OpenTherm HVAC systems. It can even receive messages or send command’s.
Applications:Communication• Extend your AMR-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
OpenTherm converter:software option for FieldCommander
PRELIMINARY! Available soon
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your AMR device and visualize the system on a webpage.Integration• Your AMR device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor AMR devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
FieldCommander
OpenTherm
Heater / Boiler
H
System requirements:Communication• at least 1 free I2C port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt270 OpenTherm protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
OpenTherm is a trademark of The OpenTherm Association.
FCopt270
Extra/New
• Communicate with OpenTherm (v3) based HVAC equipment
• Support integration of building automation systems with HVAC units.
• Support linking systems
OpenTherm started as a protocol to communicate between a thermostat and a central heating system. Today OpenTherm can also be used for communication
With FCopt270 a FieldCommander controller can easily communicate with your OpenTherm HVAC systems. It can even receive messages or send command’s.
device with the FieldCommander communications
software option for FieldCommander® devices
PRELIMINARY! Available soon
Enable integration
• Link AMR devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• FieldCommander operates as an OpenTherm Master, supporting 1 OpenTherm slave (HVAC-system)
• 1 license for 1 FieldCommander
• Content
• Protocol converter software
• Driver software
• 1 adapter with OpenTherm AB-plug
Using FieldCommander and this software option it is now easy to link your AMR device and visualize the system on a webpage.
Your AMR device can now be integrated with other systems.
Monitor AMR devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free I2C port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
OpenTherm is a trademark of The OpenTherm Association.
Highlights
SNMP (Simple Network Management Protocol) is a protocol to communicate between SNMP-agents(server) and SNMP-managers(client).Basic SNMP-agent with MIB (Management Information Base) is already supported in the FieldCommander software, starting v3.6.This SNMP-option allow you to extend the basic SNMPcommands with extra ObjectIdentifiers, which is easy if you want your own application to support SNMPas well.Applications:Mangement/Maintenance
• SNMPv2 is widely used and is the de facto network
SNMP converter:software option for FieldCommander
PRELIMINARY! Available soon
• SNMPv2 is widely used and is the de facto networkprotocol in the Internet community. Use a SNMP-client program (like OpenView, Nagios or OpenNMS) to collect all the info of FieldCommander devices in your network.Communication• Extend your SNMP-device with the FieldCommander communications options, like email; FTP; SMS or remote control.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
SNMP-agent, like
FieldCommander
SNMP v2
SNMP client, displaying
system- or application data
H
System requirements:Communication• no communication port on your FieldCommander is requiredFieldCommander software
>= version 3.5.27•at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt280 SNMP protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
SNMP is a trademark of SNMP Research International Inc. .
FCopt280
Extra/New
• Allows you to extend the basisc SNMP-agent application in FieldCommander with several additional OID’s (Object IDentifiers) for your own applictaion.
Enable integration
SNMP (Simple Network Management Protocol) is a agents(server)
agent with MIB (Management Information Base) is already supported in the FieldCommander
option allow you to extend the basic SNMP-commands with extra ObjectIdentifiers, which is easy if you want your own application to support SNMP-objects
SNMPv2 is widely used and is the de facto network-management
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Use SNMP to send/receive IP-info to/from other systems or devices.
Extra functionality
• SNMP supports to Set or Get system values to/from your FieldCommander
• This option allows you to Set or Get extra FieldCommander application data to/from SNMP-clients.
• This option support 100 extra OID’s for values + 100 extra OID’s for text.
• SNMP is often used for system health monitoring
Support details
• FieldCommander operates as an SNMP-agent, supporting SNMP-clients. See RFC3411-RFC3418
This option supports you to create additional OID’s (Object Identifiers)
SNMPv2 is widely used and is the de facto network-management client program (like
OpenView, Nagios or OpenNMS) to collect all the info of
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
support for many dedicated FieldCommander functions included.
SNMP client, displaying
or application data
H
V2010-b
no communication port on your FieldCommander is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
additional OID’s (Object Identifiers) for your specific application.
• 1 license for 1 FieldCommander
• Content
• extension software for SNMP protocol converter software
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
SNMP is a trademark of SNMP Research International Inc. .
HighlightsZ-Wave is a popular wireless protocol that is being used in home & building automation.The Z-Wave software option is a protocol converter, enabling the FieldCommander software to link to ZWave devices.
Applications:Communication• Extend your ZWave-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
Z-Wave converter:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your ZWave device and visualize the system on a webpage.Integration• Your ZWave device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor ZWave devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication
• no communication port on your FieldCommander device is required
FieldCommander software
• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt290 Z-Wave protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Z-Wave is a registered trademark of Sigma Designs / ZenSys Corp..
Visualization or remote controlZ-Wave devices
FCopt290
Extra/New
• Communicate with ZWave devices
• Support extra functionality to your ZWave devices
• Support linking systems
Enable integration
Wave is a popular wireless protocol that is being used
Wave software option is a protocol converter, enabling the FieldCommander software to link to Z-
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Link ZWave devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support ZWave for sensors and actors
• Supports ZWave bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for Zwave devices.
• Content
• Protocol converter software
• Driver software
• ZWave adapter(interfac)included.
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your ZWave device and visualize the system on a webpage.
Your ZWave device can now be integrated with other systems.
Monitor ZWave devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
no communication port on your FieldCommander device is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Wave is a registered trademark of Sigma Designs / ZenSys Corp..
Visualization or remote control Z-Wave RF is also known as:
• Connect Radio System (Merten)• HomePro Radio System (ACT)• e-Domotica (Eminent)• Interact (Duwi & Popp)
ZWave
TCP/IP
EthernetZ-Wave GSM
PC/PDAI/O
HighlightsVisonic is manufacturer of alarm systems. The Visonic Power max is supporting many RF sensors. This Visonic software option is a protocol converter, enabling the FieldCommander software to receive commands from Powermax RF devices.
Applications:Communication• Extend your Visonic-devices with the FieldCommander communications options, like email; FTP; SMS or remote control.
Visonic RF converter:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your Visonic device and visualize the system on a webpage.Integration• Your Visonic device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor Visonic devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WANApplication
visualization
logging
control
FieldCommander
H
System requirements:Communication• at least 1 free USB port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt310 Visonic protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Visonic is a registered trademark of Visonic Ltd. (Israel).
Visualization or remote controlVisonic devices
FCopt310
Extra/New
• Communicate with Visonic devices
• Support extra functionality to your Visonic devices
• Support linking systems
Enable integration
Visonic is manufacturer of alarm systems. The Visonic Power max is supporting many RF sensors. This Visonic software option is a protocol converter, enabling the FieldCommander software to receive
devices with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
Enable integration
• Link Visonic devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support Visonic for sensors and actors
• Supports Visonic bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for Visonic devices.
• Content
• Protocol converter software
• Driver software
• Adapter (interface) included.
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your Visonic device and visualize the system on a webpage.
Your Visonic device can now be integrated with other systems.
Monitor Visonic devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free USB port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
HighlightsBluetooth is a wireless protocol available on many devices like mobile phonesThis Bluetooth software option is a protocol converter, enabling the FieldCommander software to link to Bluetooth devices.
Applications:Presence detection• you can detect which mobile phone are in the building. This can be used to detect if first-aid personel is in the building.Visualization
Bluetooth converter:software option for FieldCommander
PRELIMINARY! Available soon
Visualization• Using several FieldCommanders you can detect the location of a user and visualize this user on a map.Integration• Your Bluetooth devices can now be integrated into other applications, like access control. Eq only provide access for users whose phone is detected.Tracking & Tracing• monitor/log Bluetooth devices.FieldCommander scriptscript example included• support for many dedicated FieldCommander functions included.
FieldCommanders
Tracking & Tracing users/cell phones
H
System requirements:Communication• at least 1 free USB port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt320 Bluetooth RF protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Bluetooth is a registered trademark of The Bluetooth SIG .
Tracking & Tracing users/cell phones
FCopt320
Extra/New
• Communicate with Bluetooth devices
• Support extra functionality to your Bluetooth devices
• Support linking systems
Enable integration
Bluetooth is a wireless protocol available on many
This Bluetooth software option is a protocol converter, enabling the FieldCommander software to link to
you can detect which mobile phone are in the building. This can be
software option for FieldCommander® devices
PRELIMINARY! Available soon
Enable integration
• Link Bluetooth devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support Bluetooth devices
• 1 license for 1 FieldCommander;
no license restrictions for Bluetooth devices.
• Content
• Protocol converter software
• Driver software
• Bluetooth adapter (interface) included.
Using several FieldCommanders you can detect the location of a
Your Bluetooth devices can now be integrated into other applications, like access control. Eq only provide access for users
support for many dedicated FieldCommander functions included.
Tracking & Tracing users/cell phones
H
V2010-b
at least 1 free USB port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Bluetooth is a registered trademark of The Bluetooth SIG .
Tracking & Tracing users/cell phones
HighlightsGPS is a popular Global Positioning Systembased on satelites. This FCopt330 option is software and hardware, enabling a FieldCommander controller to receive the GPS-positioning info.
Applications
Location detection• FieldCommander can detect where it is located. This can be useful
GPS converter:software option for FieldCommander
PRELIMINARY! Available soon
• FieldCommander can detect where it is located. This can be useful in mobile vehicle application.Visualization• Visualize you info on a map or even Google Maps.Integration• Your GPS device can be integrated into other applications.Tracking & Tracing• monitor/log mobile vehicles.FieldCommander script• script example included• support for dedicated FieldCommander functions included.
FieldCommander
Location info from GPS satelites
H
System requirements:Communication• at least 1 free USB port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt330 GPS protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Location info from GPS satelites
FCopt330
Extra/New
• Communicate with GPS devices
• Support extra functionality to your GPS devices
• Support linking systems
Enable integration
GPS is a popular Global Positioning Systembased on satelites. This FCopt330 option is software and hardware, enabling a FieldCommander controller to
FieldCommander can detect where it is located. This can be useful
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Link GPS devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support XXX for sensors and actors
• Supports XXX bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for XXX devices.
• Content
• Protocol converter software
• Driver software
• GPS adapter (USB-interface) included.
FieldCommander can detect where it is located. This can be useful
Your GPS device can be integrated into other applications.
support for dedicated FieldCommander functions included.
H
V2010-b
at least 1 free USB port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
HighlightsPLCBus is a system for devices and sensors based on the PLCBus Powerline communication technology.This FCopt340 software option is a protocol converter, enabling the FieldCommander software to send/receive commands to/from PLCBus.
Applications:Communication• Extend your PLC-bus-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
PLC-bus converter:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your PLC-bus device and visualize the system on a webpage.Integration• Your PLC-bus device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor PLC-bus devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free USB port or 1 free RS232 port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt340 PLC-bus protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
PLCBus is a trademark of Advanced Technical Solutions ltd.
Visualization or remote controlPLC-bus devices
FCopt340
Extra/New
• Communicate with PLC-bus devices
• Support extra functionality to your PLC-bus devices
• Support linking systems
Enable integration
PLCBus is a system for devices and sensors based on the PLCBus Powerline communication technology.This FCopt340 software option is a protocol converter, enabling the FieldCommander software to send/receive
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
Enable integration
• Link PLC-bus devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support PLC-bus for sensors and actors
• Supports PLC-bus bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for PLC-bus devices.
• Content
• Protocol converter software
• Driver software
• PLC-bus adapter (computer interface) is required but NOT included.
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to bus device and visualize the system on a webpage.
bus device can now be integrated with other systems.
bus devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free USB port or 1 free RS232 port with hardware flow
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
PLCBus is a trademark of Advanced Technical Solutions ltd.
Visualization or remote control
Highlights
Plugwise is a seies of wireless energy sensors for measuring energy in your home or office, based on ZigBee communication technology.This software option is a protocol converter, enabling the FieldCommander software to link to Plugwise devices.
Applications:Communication• Extend your Plugwise-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
Plugwise converter:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your Plugwise device and visualize the system on a webpage.Integration• Your Plugwise device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor Plugwise devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
Plugwise sensors FieldCommander
H
System requirements:Communication• at least 1 free USB port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt350 Plugwise protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Plugwise is a trademark of Plugwise bv.
FCopt350
Extra/New
• Communicate with Plugwise devices
• Support extra functionality to your Plugwise devices
• Support linking systems
Enable integration
Plugwise is a seies of wireless energy sensors for measuring energy in your home or office, based on
This software option is a protocol converter, enabling the FieldCommander software to link to Plugwise
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
Enable integration
• Link Plugwise devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support Plugwise for sensors and actors
• Supports Plugwise bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for Plugwise devices.
• Content
• Protocol converter software
• Driver software
• Plugwise adapter (USB-interface) required but NOT included.
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your Plugwise device and visualize the system on a webpage.
Your Plugwise device can now be integrated with other systems.
Monitor Plugwise devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
FieldCommander
H
V2010-b
at least 1 free USB port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
HighlightsDivar is the Bosch productfamily of NVR’s (Network Video Recorders) for CCTV applications.This software option is a protocol converter, enabling the FieldCommander software to send/receive commands to/from a Divar unit.
Applications:Communication• Extend your Divar systems with the FieldCommander communications options, like email; FTP; SMS or remote control.
Divar converter:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your Divar device and visualize the system on a webpage.Integration• Your Divar device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor Divar devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
FieldCommander
Camera’s Divar Network Video Recorder
H
System requirements:Communication• at least 1 free RS232 port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt360 Divar protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Divar is a trademark of Bosch Security Systems bv.
Camera’s Divar Network Video Recorder
FCopt360
Extra/New
• Communicate with Divar devices
• Support extra functionality to your Divar devices
• Support linking systems
Enable integration
Divar is the Bosch productfamily of NVR’s (Network
This software option is a protocol converter, enabling the FieldCommander software to send/receive
Extend your Divar systems with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Link Divar devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support Divar systems
• Supports Divar bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for Divar devices.
• Content
• Protocol converter software
• Driver software
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your Divar device and visualize the system on a webpage.
Your Divar device can now be integrated with other systems.
Monitor Divar devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
FieldCommander
Camera’s Divar Network Video Recorder
H
V2010-b
at least 1 free RS232 port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Camera’s Divar Network Video Recorder
HighlightsVideo information is important.CER support integration of video with the CER webcam devices to the FieldCommander technology. This software option supports the easy integration of video in your security, telemetry or building automation applications.
Applications
Communication• create event-driven CCTV application with FieldCommander
WebCam gateway:software option for FieldCommander
PRELIMINARY! Available soon
• create event-driven CCTV application with FieldCommander communications options, like SMS or even MMS.Integration• integrate video triggers with other triggers for alarming / video monitoring.• Link your cash register, access control system or car detector at the gas station to a CCTV system for automated video registration.Control CCTV• control your CCTV system.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
FieldCommanderIP WebCam’s
H
System requirements:Communication• at least and IP/ethernet connection is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt370 CER webcam supportSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
.
FCopt370
Extra/New
• Communicate with Divar devices
• Support extra functionality to your Webcam devices
• Support linking systems
Enable integration
CER support integration of video with the CER webcam devices to the FieldCommander technology. This software option supports the easy integration of video in your security, telemetry or building automation
driven CCTV application with FieldCommander
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Link Webcam devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support CER Webcam systems
• 1 license for 1 FieldCommander;
no license restrictions for Divar devices.
• Content
• Webcam support driver
driven CCTV application with FieldCommander
integrate video triggers with other triggers for alarming / video
Link your cash register, access control system or car detector at the gas station to a CCTV system for automated video registration.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
HighlightsNetworX is a popular product family of alarm systems that is used in many security area’s like homes, shops or offices.The NetworX software option is a protocol converter enabling the FieldCommander system to link to a NetworX system panel.
Applications:Communication• Extend your NetworX-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
NetworX converter:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your NetworX device and visualize the system on a webpage.Integration• Your NetworX device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor NetworX devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
NetworX FieldCommander
Other systems
H
System requirements:Communication• at least 1 free RS232 port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt380 NetworX protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
NetworX is a trademark of Caddx (GE Interlogix)
FCopt380
Extra/New
• Communicate with XXX devices
• Support extra functionality to your XXX devices
• Support linking systems
Enable integration
NetworX is a popular product family of alarm systems that is used in many security area’s like homes, shops
The NetworX software option is a protocol converter enabling the FieldCommander system to link to a
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Link NetworX devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support NetworX for sensors and actors
• Supports NetworX bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for NetworX devices.
• Content
• Protocol converter software
• Driver software
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your NetworX device and visualize the system on a webpage.
Your NetworX device can now be integrated with other systems.
Monitor NetworX devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
FieldCommander
Other systems
H
V2010-b
at least 1 free RS232 port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
HighlightsIR (InfraRed) is a popular product family of alarm systems that is used in many security area’s like homes, shops or offices.The IR software option is a protocol converter enabling the FieldCommander system to link to a IR system.
Applications:Communication• Extend your IR-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
IR support converter:software option for FieldCommander
PRELIMINARY! Available soon
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your IR device and visualize the system on a webpage.Integration• Your IR device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor IR devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free IP/ethernet connections is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt390 IR support protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Visualization or remote controlZigBee devices
FCopt390
Extra/New
• Communicate with IR devices
• Support extra functionality to your IR devices
• Support linking systems
Enable integration
IR (InfraRed) is a popular product family of alarm systems that is used in many security area’s like
The IR software option is a protocol converter enabling the FieldCommander system to link to a IR system.
device with the FieldCommander communications
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Link IR devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support IR for sensors and actors
• Supports IR bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for IR devices.
• Content
• Protocol converter software
• Driver software
• IR LAN adapter (IRtrans) is
required but NOT included.
Using FieldCommander and this software option it is now easy to link your IR device and visualize the system on a webpage.
Your IR device can now be integrated with other systems.
Monitor IR devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
HighlightsIn some application area’s using a central Service Centre for Alarm Control; Health Services or System monitoring is very welcome.This software options supports linking the FieldCommander devices in a home, office, shop or factory to an integrated system with advanced central services.Please contact CER for the available Service Centre services.
Applications:
Service Centre support:software option for FieldCommander
Applications:
Home/Building Automation• Remotely control you home or office equipment.Communication• central communication services like SMS or email alerting.Integration• Integrate separate buildings/objects/vehicles into 1 global system.New Services• Service Centre can offer new service like central video monitoring.• Central software update services.
Internet
CER Service Centre
Centrallocal
H
System requirements:Communication• at least 1 free USB/XXX port with hardware flow control is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt400 Service Centre support driverSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
VSB; Video Storage Bank is a trademark of CER
MeldkamerFieldCommander
FCopt400
Extra/New
• Provide communication for local systems to central Service Centre
• Support extra functionality to your security devices.
• Support linking systems
Enable integration
In some application area’s using a central Service Centre for Alarm Control; Health Services or System
FieldCommander devices in a home, office, shop or factory to an integrated system with advanced central
Please contact CER for the available Service Centre
software option for FieldCommander® devices
Enable integration
• Link local system to a central Service Centre to combine and integrate all these local systems to 1 powerfull network system.
Extra functionality
• link/communicate local FieldCommander system with central Service Centre.
Support details
• support the CER Service Centre applications
• script example included
• support for many dedicated FC <> SC communication functions included. (FC=FieldCommander; SC=ServiceCentre)
• 1 license for 1 FieldCommander
• please contact the Service Centre
central communication services like SMS or email alerting.
Integrate separate buildings/objects/vehicles into 1 global system.
Service Centre can offer new service like central video monitoring.
CER Service Centre
H
V2010-b
at least 1 free USB/XXX port with hardware flow control is required
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
• please contact the Service Centre licensen.
• Content
• Protocol driver software
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Meldkamer
HighlightsPHC (PeHa House Control) is a protocol that is being used in home & building automation.This software option is a protocol converter, enabling the FieldCommander software to link to PHC devices.
Applications:Communication• Extend your PHC-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
PHC converter:software option for FieldCommander
PRELIMINARY! Available soon
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your PHC device and visualize the system on a webpage.Integration• Your PHC device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor PHC devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
RS485;
PHC
module
bus
H
System requirements:Communication• at least 1 free RS485 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt410 PHC protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
PHC is a registered trademark of PEHA Paul Hochköpper GmbH.
Visualization or remote controlPHC devices
FCopt410
Extra/New
• Communicate with PHC devices
• Support extra functionality to your PHC devices
• Support linking systems
Enable integration
PHC (PeHa House Control) is a protocol that is being
This software option is a protocol converter, enabling the FieldCommander software to link to PHC devices.
device with the FieldCommander communications
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Link PHC devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support PHC for sensors and actors
• Supports PHC bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for PHC devices.
• Content
• Protocol converter software
• Driver software
• No adapter (data interface)
required; only RS485-bus.
Using FieldCommander and this software option it is now easy to link your PHC device and visualize the system on a webpage.
Your PHC device can now be integrated with other systems.
Monitor PHC devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
PHC Ethernet
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
PHC is a registered trademark of PEHA Paul Hochköpper GmbH.
Visualization or remote control PHC
TCP/IP
EthernetPHC GSM
PC/PDAI/O
HighlightsAirco systems are popular systems often used in buildings.Monitoring of these systems and integration of these systems with other building equipment is important.This software option is a protocol converter, enabling the FieldCommander software to link to airco systems.
Applications:Communication• Extend your airco-system with the FieldCommander communications options, like email; FTP; SMS or remote control.
Daikin airco link:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your airco device and visualize the system on a webpage.Integration• Your airco system can now be integrated with other systems.Monitoring, alerting and reporting• Monitor airco devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
netwerk
Indoor
OutdoorVisualization; logging; control
FieldCommander
Adaptor
H
System requirements:Communication• at least 1 free RS232 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt420 Daikin airco linkSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Daikin is a registered trademark of Daikin Industries
FCopt420
Extra/New
• Redundant applications: Start 2nd systems when 1st system fails; but test 2nd system each month
• Communicate with airco system
• Supports extra functionality to your airco system devices
• Support linking systems
Enable integration
Airco systems are popular systems often used in
Monitoring of these systems and integration of these systems with other building equipment is important.This software option is a protocol converter, enabling the FieldCommander software to link to airco systems.
system with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Link Airco systems to all other kind of devices the FieldCommander is supporting. FieldCommander can be your gateway to other systems
Extra Airco functionality
• backup operation
• energy management
• preventive maintenance
• control over Indoor units operation
• System diagnostics
Support details
• support Airco adaptor; .
• 1 license for 1 FieldCommander;
• no license restrictions for airco-system.
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your airco device and visualize the system on a webpage.
Your airco system can now be integrated with other systems.
Monitor airco devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
Compatibility List;
Outdoor: Indoor::
RXYQ-M/P (VRV II, VRV III) FXCQ FXNQ FXLQ
RXYK (VRV) FXFQ FXKQ FXZQ
RXYSQ-M/P (VRV Small) FXDQ FXSQ FXAQ
RXY-M FXUQ FXMQ FXHQ.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
system.
• Content
• Protocol converter software
• Driver software
• Adapter (data interface);
with power adaptor included.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
HighlightsAirco systems are popular systems often used in buildings.Monitoring of these systems and integration of these systems with other building equipment is important.This software option is a protocol converter, enabling the FieldCommander software to link to airco systems.
Applications:Communication• Extend your airco-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
Mitsubishi converter:software option for FieldCommander
PRELIMINARY! Available soon
options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your airco device and visualize the system on a webpage.Integration• Your airco device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor airco system and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
netwerk
Visualization; logging; control
FieldCommander
Adaptor
Outdoor
Indoor
H
System requirements:Communication• at least 1 free RS232 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt430 Mitsubishi protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Mitsubishi® is registered trademark of Mitsubishi Electro.
FCopt430
Extra/New
• Redundant applications: Start 2nd systems when 1st system fails; but test 2nd system each month
• Communicate with airco system
• Supports extra functionality to your airco system devices
• Support linking systems
Airco systems are popular systems often used in
Monitoring of these systems and integration of these systems with other building equipment is important.This software option is a protocol converter, enabling the FieldCommander software to link to airco systems.
device with the FieldCommander communications
software option for FieldCommander® devices
PRELIMINARY! Available soon
Enable integration
• Link Airco systems to all other kind of devices the FieldCommander is supporting. FieldCommander can be your gateway to other systems
Extra Airco functionality
• backup operation
• energy management
• preventive maintenance
• control over Indoor units operation
• System diagnostics
Support details
• support Airco adaptor; .
• 1 license for 1 FieldCommander; no license restrictions for airco-system.
Using FieldCommander and this software option it is now easy to link your airco device and visualize the system on a webpage.
Your airco device can now be integrated with other systems.
Monitor airco system and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
Outdoor
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
• Content
• Protocol converter software
• Driver software
• Adapter (data interface);
with power adaptor included.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
HighlightsOptiCare is a product family of sensor wich are popular in healthcare applications. Linking these sensor to other systems for example for alert systems stimulates the integration of your applications.This software option is a protocol converter, enabling the FieldCommander software to link to OptiCare sensors.
Applications:Communication• Extend your OptiCare-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
OptiCare-link:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your OptiCare device and visualize the system on a webpage.Integration• Your OptiCare device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor OptiCare devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
H
System requirements:Communication• at least 1 free USB port requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt440 OptiCare protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Opticare® is registered trademark of Daza bv.
Alerting or VisualizationOptiCare devices
FCopt440
Extra/New
• Communicate with OptiCare devices
• Support extra functionality to your OptiCare devices
• Support linking systems
Enable integration
OptiCare is a product family of sensor wich are popular in healthcare applications. Linking these sensor to other systems for example for alert systems stimulates the
This software option is a protocol converter, enabling the FieldCommander software to link to OptiCare
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
Enable integration
• Link OptiCare devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support OptiCare sensors.
•1 license for 1 FieldCommander;
no license restrictions for XXX devices.
• Content
• Protocol converter software
• Driver software
• Adapter (interface) included.
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your OptiCare device and visualize the system on a webpage.
Your OptiCare device can now be integrated with other systems.
Monitor OptiCare devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Alerting or Visualization
HighlightsBlueChip is a protocol that is used in access control systems.This BlueChip software option is a protocol converter, enabling the FieldCommander software to link to BlueChip key readers.
Applications:Communication• Extend your BlueChip-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
BlueChip converter:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your BlueChip system and visualize the system on a webpage.Integration• Your BlueChip device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor BlueChip devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
controlBlueChip
H
System requirements:Communication• at least 1 free RS485 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt450 BlueChip protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
BlueChip is a registered trademark of Winkhaus.
Visualization or remote control
BlueChip
keys + reader
FCopt450
Extra/New
• Communicate with BlueChip devices
• Support extra functionality to your BlueChip devices
• Support linking systems
Enable integration
• Link BlueChip devices to all other
BlueChip is a protocol that is used in access control
This BlueChip software option is a protocol converter, enabling the FieldCommander software to link to
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Link BlueChip devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support BlueChip keys
• support BlueChip readers
• 1 license for 1 FieldCommander;
no license restrictions for BlueChip keys.
• Content
• Protocol converter software
• Driver software
• BlueChip reader 8082 (RS485) NOT included.
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your BlueChip system and visualize the system on a webpage.
Your BlueChip device can now be integrated with other systems.
Monitor BlueChip devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
Wiegand is a protocol used often in access control systems.This Wiegand software option is a protocol converter, enabling the FieldCommander software to send Wiegand messages to other devices, like access control systems.
Applications:Communication• Extend your access control device with the FieldCommander communications options, like email; FTP; SMS or remote control.Visualization
Wiegand converter:software option for FieldCommander
PRELIMINARY! Available soon
Visualization• Using FieldCommander and this software option it is now easy to link your access control device and visualize the system on a webpage.Integration• Your access control device can now be integrated with other systems.Control• Control access control system and extend the functionality using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
FieldCommander
Application
visualization
logging
control
Access control system
with Wiegand input
H
System requirements:Communication• at least 1 free RS232 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt460 Wiegand protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Wiegand is named after the Wiegand effect, discoverd by John R. Wiegand.
FCopt460
Extra/New
• Communicate with access control systems
• Support extra functionality to your access control devices
• Support linking systems
Enable integration
Wiegand is a protocol used often in access control
This Wiegand software option is a protocol converter, enabling the FieldCommander software to send Wiegand messages to other devices, like access control systems.
Extend your access control device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
Enable integration
• Link access control devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• send Wiegand messages to other systems like access control systems.
• Supports the 26-bit version (other version possible also, pls ask)
• 1 license for 1 FieldCommander;
no license restrictions for XXX devices.
• Content
• Protocol converter software
• Driver software
• Wiegand adapter (interface)
Using FieldCommander and this software option it is now easy to link your access control device and visualize the system on a
Your access control device can now be integrated with other
Control access control system and extend the functionality using
support for many dedicated FieldCommander functions included.
Access control system
with Wiegand input
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
• Wiegand adapter (interface) included.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Wiegand is named after the Wiegand effect, discoverd by John R. Wiegand.
Highlights
MBus (Meter-Bus standard specified in EN1434protocol for energy measurement devices, used by companies like Siemens, Kamstrup or Landis&Gyr.The MBus software option is a protocol converter, enabling the FieldCommander software to communicate with MBus devices.
Applications:Communication• Extend your MBus-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
M-Bus converter:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your MBus device and visualize the system on a webpage.Integration• Your MBus device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor MBus devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
controlMBus energy
measurement devices
H
System requirements:Communication• at least 1 free RS485 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt470 MBus protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
M-Bus is a trademark of PadMess GmbH.
Visualization or remote control
FCopt470
Extra/New
• Communicate with MBus devices
• Support extra functionality to your MBus devices
• Support linking systems
Enable integration
Bus standard specified in EN1434-3) is a protocol for energy measurement devices, used by companies like Siemens, Kamstrup or Landis&Gyr.The MBus software option is a protocol converter, enabling the FieldCommander software to communicate
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Link MBus devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• receives the MBus info
• FieldCommander is the Mbus-master.
• 1 license for 1 FieldCommander;
no license restrictions for MBus devices.
• Content
• Protocol converter software
• Driver software
•
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your MBus device and visualize the system on a webpage.
Your MBus device can now be integrated with other systems.
Monitor MBus devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
Plogg is protocol for wireless energysensor, using the ZigBee RF communication.The Plogg software option is a protocol converter, enabling the FieldCommander software to communicate with Plogg devices.
Applications:Communication• Extend your Plogg-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
Plogg converter:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your Plogg device and visualize the system on a webpage.Integration• Your Plogg device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor Plogg devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
Plogg energy
H
System requirements:Communication• at least 1 free RS232 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt480 Plogg protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Wiegand is a registered trademark of XXX Alliance.
Visualization or remote controlPlogg energy
measurement devices
FCopt480
Extra/New
• Communicate with Plogg devices
• Support extra functionality to your Plogg devices
• Support linking systems
Enable integration
Plogg is protocol for wireless energysensor, using the
The Plogg software option is a protocol converter, enabling the FieldCommander software to communicate
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
• Link Plogg devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
•1 license for 1 FieldCommander;
no license restrictions for Plogg devices.
• Content
• Protocol converter software
• Driver software
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your Plogg device and visualize the system on a webpage.
Your Plogg device can now be integrated with other systems.
Monitor Plogg devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
Securakey RK-XRM is a reader for proximity acccess cards or keys.This software option is a protocol converter, enabling the FieldCommander software to link(receive or send) to Securakey devices.
Applications:Communication• Extend your Securakey-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
Securakey converter:software option for FieldCommander
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your Securakey device and visualize the system on a webpage.Integration• Your Securakey device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor Securakey devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
Securakey keys/reader
Read cards
Light
Switch door
Sensors
Actors
H
System requirements:Communication• at least 1 free RS485 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt490 Securakey protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Securakey a registered trademark of Securakey (soundcraft Inc).
Visualization or remote control
FCopt490
Extra/New
• Communicate with Securakey RK-XRM devices
• Support extra functionality to your access control system.
• Support linking systems
Enable integration
XRM is a reader for proximity acccess
This software option is a protocol converter, enabling the FieldCommander software to link(receive or send)
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
Enable integration
• Link Securakey devices to all other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support Securakey sensor reader.
• Supports Securakey reader bidirectional
• 1 license for 1 FieldCommander;
no license restrictions for Securakey devices.
• Content
• Protocol converter software
• Driver software
• Securakey adapter (interface) is not required.
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your Securakey device and visualize the system on a webpage.
Your Securakey device can now be integrated with other systems.
Monitor Securakey devices and extend them with alerting and reporting possibilities using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Securakey a registered trademark of Securakey (soundcraft Inc).
Visualization or remote control
Highlights
Somfy RTS is a wireless porotocol for controlling shades.This software option is a protocol converter, enabling the FieldCommander software to link(receive or send) to Somfy RTS devices.
Applications:Communication• Extend your Somfy-device with the FieldCommander communications options, like email; FTP; SMS or remote control.
Somfy RTS converter:software option for FieldCommander
PRELIMINARY! Available soon
communications options, like email; FTP; SMS or remote control.Visualization• Using FieldCommander and this software option it is now easy to link your Somfy device and visualize the system on a webpage.Integration• Your Somfy device can now be integrated with other systems.Monitoring, alerting and reporting• Monitor Somfy devices and extend them with alerting and reporting possibilities using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
Somfy shades
Shades
Actors
H
System requirements:Communication• at least 1 free RS232 or RS485 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt510 Somfy RTS protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
RTS (Radio Techology Somfy) a registered trademark of Somfy Inc..
Visualization or remote control
FCopt510
Extra/New
• Communicate with RTS based Somfy devices
• Support extra functionality to your access control system.
• Support linking systems
Enable integration
• Control Somfy RTS shades from other kind of devices
Somfy RTS is a wireless porotocol for controlling
This software option is a protocol converter, enabling the FieldCommander software to link(receive or send)
device with the FieldCommander communications options, like email; FTP; SMS or remote control.
software option for FieldCommander® devices
PRELIMINARY! Available soon
other kind of devices FieldCommander is supporting. FieldCommander can be your gateway to other systems
Support details
• support Somfy RTS shades.
• RTS range is 25m under optimal conditions
• 16 RF channels supported
• the interface can not program the limit points on Somfy RTS motors. You will need a normal RTS controller to program the shade motors. This interface simply provides the ability to communicate up/down/and stop commands for 16 RTS channels.
• 1 license for 1 FieldCommander;
no license restrictions for Securakey devices.
• Content
• Protocol converter software
communications options, like email; FTP; SMS or remote control.
Using FieldCommander and this software option it is now easy to link your Somfy device and visualize the system on a webpage.
Your Somfy device can now be integrated with other systems.
Monitor Somfy devices and extend them with alerting and reporting
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
• Protocol converter software
• Driver software
• Somfy RTS interface is included.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Software option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
RTS (Radio Techology Somfy) a registered trademark of Somfy Inc..
Visualization or remote control
Highlights
CrossPoint (www.crosspoint.nl) is a manufacturer of popular asset and people protection systems.The devices are being used in many security applications. This CrossPoint software option is a protocol converter, enabling the FieldCommander software to link to CrossPoint RS485-based devices.
Applications•access control; identification, asset protection, people safety.Communication• your data acquisition device can now be extended with the FieldCommander communications options, like email; FTP or SMS.
Crosspoint Fieldbus 485-host converter:software option for FieldCommander
FieldCommander communications options, like email; FTP or SMS.Visualization• Using FieldCommander and this software option it is now easy to link your data acquisition device and generate a webpage displaying the system status.Integration• your sensor device can now be integrated with other systems.Alerting and reporting• extend alerting & reporting using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
Crosspoint devices
Read cards
Light
Switch door
Sensors
Actors
H
System requirements:Communication• at least 1 free RS485 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt901 CrossPoint FieldBus-485-host protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Visualization or remote control
CrossPoint is a registered trademark of Cross Point bv.
FCopt901
Extra/New
• Communicate with CrossPoint RS485• Support extra functionality to your applications• Support linking systems
Enable integration
CrossPoint (www.crosspoint.nl) is a manufacturer of popular asset and people protection systems.The devices are being used in many security applications. This CrossPoint software option is a protocol converter, enabling the FieldCommander
based devices.
access control; identification, asset protection, people safety.
your data acquisition device can now be extended with the FieldCommander communications options, like email; FTP or SMS.
host converter:software option for FieldCommander® devices
• Link CrossPoint devices to all other kind of devices the FieldCommander is supporting. FieldCommander can be you gateway to other systems.
Details
• support max. 256 readers
Support
• supports mifare readers (125 kHz and 13.56 MHz)• supports personal/asset tag readers
• Content
• Driver software• Protocol converter software• CrossPoint module NOT included
FieldCommander communications options, like email; FTP or SMS.
Using FieldCommander and this software option it is now easy to link your data acquisition device and generate a webpage displaying
your sensor device can now be integrated with other systems.
extend alerting & reporting using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
host protocol converterSoftware option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
Idencom (www.idencom.com) is a manufacturer of popular fingerprintreaders for identicatition and authentication.The devices are being used in many security applications. This Idencom BioKey software option is a protocol converter, enabling the FieldCommander software to link to Biokey (Idencom) RS485 devices.
Applications
•access control; identification, asset protection, people safety.Communication
• your data acquisition device can now be extended with the
Biokey (Idencom) converter:software option for FieldCommander
• your data acquisition device can now be extended with the FieldCommander communications options, like email; FTP or SMS.
Visualization
• Using FieldCommander and this software option it is now easy to link your sensor device and generate a webpage with system status.Integration
• your data acquisition device can now be integrated with other systems.
Alerting and reporting
• extend alerting & reporting using the FieldCommander technology.
FieldCommander script
• script example included
• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
Biokey reader
Read cards
Sensors
Light
Switch door
Actors
H
System requirements:Communication• at least 1 free RS485 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt902 Biokey (Idencom) protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Idencom is a registered trademark of Idencom AG.
Visualization or remote control
FCopt902
Extra/New
• Communicate with BioKey RS485 reader.
• Support extra functionality to your applications
• Support linking systems
Enable integration
Idencom (www.idencom.com) is a manufacturer of popular fingerprintreaders for identicatition and
The devices are being used in many security applications. This Idencom BioKey software option is a protocol converter, enabling the FieldCommander software to link to Biokey (Idencom) RS485 devices.
access control; identification, asset protection, people safety.
your data acquisition device can now be extended with the
Biokey (Idencom) converter:software option for FieldCommander® devices
Enable integration
• Link BioKey devices to all other kind of devices the FieldCommander is supporting
Details
• support max. 32 readers
Support
• supports RS485 based BioKey
• Content
• Driver software
• Protocol converter software
• BioKey reader NOT included
your data acquisition device can now be extended with the FieldCommander communications options, like email; FTP or SMS.
Using FieldCommander and this software option it is now easy to link your sensor device and generate a webpage with system status.
your data acquisition device can now be integrated with other
extend alerting & reporting using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Biokey (Idencom) protocol converterSoftware option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
CrossPoint (www.crosspoint.nl) is a manufacturer of popular asset and people protection systems.The devices are being used in many security applications. This CrossPoint software option is a protocol converter, enabling the FieldCommander software to link to CrossPoint IP-based devices.
Applications•access control; identification, asset protection, people safety.Communication• your data acquisition device can now be extended with the FieldCommander communications options, like email; FTP or SMS.
Crosspoint Fieldbus IP-host converter:software option for FieldCommander
FieldCommander communications options, like email; FTP or SMS.Visualization• Using FieldCommander and this software option it is now easy to link your data acquisition device and generate a webpage displaying the system status.Integration• your sensor device can now be integrated with other systems.Alerting and reporting• extend alerting & reporting using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
Crosspoint devices
Read cards
Light
Switch door
Sensors
Actors
H
System requirements:Communication• no fieldbus communication port is required; only ethernet needed.FieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt903 CrossPoint FieldBus-IP-host protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Visualization or remote control
CrossPoint is a registered trademark of Cross Point bv.
FCopt903
Extra/New
• Communicate with CrossPoint IP• Support extra functionality to your applications• Support linking systems
Enable integration
• Link CrossPoint devices to all
CrossPoint (www.crosspoint.nl) is a manufacturer of popular asset and people protection systems.The devices are being used in many security applications. This CrossPoint software option is a protocol converter, enabling the FieldCommander
based devices.
access control; identification, asset protection, people safety.
your data acquisition device can now be extended with the FieldCommander communications options, like email; FTP or SMS.
host converter:software option for FieldCommander® devices
• Link CrossPoint devices to all other kind of devices the FieldCommander is supporting. FieldCommander can be you gateway to other systems.
Details
• support max. 256 readers
Support
• supports mifare readers (125 kHz and 13.56 MHz)• supports personal/asset tag readers
• Content
• Driver software• Protocol converter software• CrossPoint module NOT included
FieldCommander communications options, like email; FTP or SMS.
Using FieldCommander and this software option it is now easy to link your data acquisition device and generate a webpage displaying
your sensor device can now be integrated with other systems.
extend alerting & reporting using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
no fieldbus communication port is required; only ethernet needed.
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
host protocol converterSoftware option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
CrossPoint (www.crosspoint.nl) is a manufacturer of popular asset and people protection systems.The devices are being used in many security applications. This CrossPoint software option is a protocol converter, enabling the FieldCommander software to link to CrossPoint IP-based devices.
Applications•access control; identification, asset protection, people safety.Communication• your data acquisition device can now be extended with the FieldCommander communications options, like email; FTP or SMS.
Crosspoint Fieldbus IP-client converter:software option for FieldCommander
FieldCommander communications options, like email; FTP or SMS.Visualization• Using FieldCommander and this software option it is now easy to link your data acquisition device and generate a webpage displaying the system status.Integration• your sensor device can now be integrated with other systems.Alerting and reporting• extend alerting & reporting using the FieldCommander technology.FieldCommander script• script example included• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
Crosspoint devices
Read cards
Light
Switch door
Sensors
Actors
H
System requirements:Communication• no fieldbus communication port is required; only ethernet needed.FieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt904 CrossPoint FieldBus-IP-client protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Visualization or remote control
CrossPoint is a registered trademark of Cross Point bv.
FCopt904
Extra/New
• Communicate with CrossPoint IP• Support extra functionality to your applications• Support linking systems
Enable integration
• Link CrossPoint devices to all
CrossPoint (www.crosspoint.nl) is a manufacturer of popular asset and people protection systems.The devices are being used in many security applications. This CrossPoint software option is a protocol converter, enabling the FieldCommander
based devices.
access control; identification, asset protection, people safety.
your data acquisition device can now be extended with the FieldCommander communications options, like email; FTP or SMS.
client converter:software option for FieldCommander® devices
• Link CrossPoint devices to all other kind of devices the FieldCommander is supporting. FieldCommander can be you gateway to other systems.
Details
• support max. 256 readers
Support
• supports mifare readers (125 kHz and 13.56 MHz)• supports personal/asset tag readers
• Content
• Driver software• Protocol converter software• CrossPoint module NOT included
FieldCommander communications options, like email; FTP or SMS.
Using FieldCommander and this software option it is now easy to link your data acquisition device and generate a webpage displaying
your sensor device can now be integrated with other systems.
extend alerting & reporting using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
no fieldbus communication port is required; only ethernet needed.
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
client protocol converterSoftware option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Highlights
Suprema (www.supremainc.com) is a manufacturer of popular fingerprintreaders for identicatition and authentication.The devices are being used in many security applications. This software option is a protocol converter, enabling the FieldCommander software to link to Unifinger(Suprema) RS485 devices.
Applications
•access control; identification, asset protection, people safety.Communication
• your data acquisition device can now be extended with the
Unifinger (Suprema) converter:software option for FieldCommander
• your data acquisition device can now be extended with the FieldCommander communications options, like email; FTP or SMS.
Visualization
• Using FieldCommander and this software option it is now easy to link your sensor device and generate a webpage with system status.Integration
• your data acquisition device can now be integrated with other systems.
Alerting and reporting
• extend alerting & reporting using the FieldCommander technology.
FieldCommander script
• script example included
• support for many dedicated FieldCommander functions included.
LAN
or
WAN
FieldCommander
Application
visualization
logging
control
Biokey reader
Read cards
Sensors
Light
Switch door
Actors
H
System requirements:Communication• at least 1 free RS485 port is requiredFieldCommander software• at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
Order info
FCopt905 Unifinger (Suprema) protocol converterSoftware option for FieldCommander devices.
Important !Options must be ordered with a FieldCommander system.Option software will be installed on 1 FieldCommander system.Several options can be installed on 1 FieldCommander system.For max. number of options please check your system spec.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Unifinger is a registered trademark of Suprema Inc..
Visualization or remote control
FCopt905
Extra/New
• Communicate with Unifinger RS485 devices.
• Support extra functionality to your applications
• Support linking systems
Enable integration
Suprema (www.supremainc.com) is a manufacturer of popular fingerprintreaders for identicatition and
The devices are being used in many security applications. This software option is a protocol converter, enabling the FieldCommander software to
access control; identification, asset protection, people safety.
your data acquisition device can now be extended with the
Unifinger (Suprema) converter:software option for FieldCommander® devices
Enable integration
• Link Unifinger devices to all other kind of devices the FieldCommander is supporting
Details
• support max. 32 readers
Support
• supports RS485 based Unifinger
• Content
• Driver software
• Protocol converter software
• Unifinger reader NOT included
your data acquisition device can now be extended with the FieldCommander communications options, like email; FTP or SMS.
Using FieldCommander and this software option it is now easy to link your sensor device and generate a webpage with system status.
your data acquisition device can now be integrated with other
extend alerting & reporting using the FieldCommander technology.
support for many dedicated FieldCommander functions included.
H
V2010-b
at least 1 free convertercomponent in your FieldCommander sw is required (depending on application more free slots can be required).
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Unifinger (Suprema) protocol converterSoftware option for FieldCommander devices.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Visualization or remote control
Supports different sensor types.
Highlights
Creating a domotica application with FCDomus is easy.For KNX/EIB based domotica devices, the Eib Tools Software (ETS) is often used for configuration and a spreadsheet is often used for project documentation.An installer defines often groupsaddresses in ETS or in his spreadsheet.With the FCDopt10 tool you can import files with groupaddress info into your FCDomus domotica controller application. The tool can be installed additionally on your FCDomus devices.
Applications
Import tool for FCDomussoftware option for FieldCommander
Applications
Building Automation• easy project management and maintenance• Integration• your building automation system (for example KNX/EIB) can now be integrated with other systems.Applications:Communication• Exchange data from your KNX ETS-tool tot your FieldCommande FCDomus application software..
EIB Sw Tool Documentation Control
Visualization
ETS Excel FCDomus
FCDopt10
H
System requirements:
Communication
• no communication port is required
FieldCommander software
• no free convertercomponent in your FieldCommander software is required .
License
• Software license is restricted for 1 FCDomus device only.
Order info
FCDopt10 Import tool for FCDomus
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
KNX is a registered trademark of Konnex Association.
FCDopt10
Extra/New
• Import definition files for easy creation of building automation configurations in FCDomus.
Enable integration
• Link FCDomus to you KNX/EIB
Creating a domotica application with FCDomus is easy.For KNX/EIB based domotica devices, the Eib Tools Software (ETS) is often used for configuration and a spreadsheet is often used for project documentation.An installer defines often groupsaddresses in ETS or in
With the FCDopt10 tool you can import files with groupaddress info into your FCDomus domotica controller application. The tool can be installed
software option for FieldCommander® devices
• Link FCDomus to you KNX/EIB installation for easy integration
Support details
• support CSV (Comma Separated Value) files
• support ETS version >=3.0 busadaptor
• supports CSV-files without value(EIS)-type definitions
• support CSV-files with value(EIS)-type definitions
• supports FCDomus version1.x
• support FCDomus I/O device files
• Content
• Import tool software
your building automation system (for example KNX/EIB) can now
tool tot your FieldCommande
EIB Sw Tool Documentation Control
Visualization
ETS Excel FCDomus
H
V2010-b
no free convertercomponent in your FieldCommander software is
Software license is restricted for 1 FCDomus device only.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
This page intentionally left blankThis page intentionally left blank
V2010-b
ApplicationsB
CER® Service CentreC
uFC; micro FieldCommandersD
FieldCommander® softwareE
FieldCommander® hardware platformsF
CER®, the companyA
Back to TOC
FieldCommander hardware platformsF
FieldCommander® modelsG
FieldCommander® optionsH
FCDomus®; domotica applicationI
FCDomus domotica application
Embedded ControllersK
AccessoriesL
ServicesM
General ConditionsN
FCGateway®; gateway toolJ
B
Service Centre C
uFC; micro FieldCommanders® D
software E
hardware platforms F
, the company A
hardware platforms F
models G
options H
; domotica application IFCDomus domotica application
V2010-b
Embedded Controllers K
L
M
N
; gateway tool J
FCDomus®: your universal domotica software Provides comfort and still is easy.
FCDomus is software to control and visualize your home or building.
FCDomus is universal and is available for several systems like KNX/EIB, EnOcean, Kadex, Xanura or ZigBee. FCDomus supports even a mix of systems !
Connectivity and interfacingFCDomus does NOT require a PC because it only needs a small FieldCommander embedded server. Your reseller can advise you about the best FieldCommander model for you.
FCDomus supports many I/O systemsFCDomus is available for many I/O systems like KNX/EIB; ZigBee, EnOcean, ZModbus or Kadex. Also many wireless systems are supported. And even using a mix of I/O systems is supported.
Functionality
I
FunctionalityDefine easily ambiances(scenes/lifestyles) and the relation between sensors and devices. A scheduler can even start ambiances automtically.
VisualisationFCDomus allows you to create displays or reports on your PC, iPod or PDA.
EasyThe system is webbased and can easily be configured with a PC. Project examples are provided.
ComfortFCDomus provices extra support and comfort.
SecurityCritical tasks in FCDomus are restricted for power users with a secure account.
SavingsWith FCDomus your don’t need a separate timer; DCF time receiver; IPmodules.
OptionsFCDomus can be extended with for example remote control with your mobile phone or speech input.
: your universal domotica software Provides comfort and still is easy.
FCDomus is software to control and visualize your home or building.
FCDomus is universal and is available for several systems like KNX/EIB, EnOcean, Kadex, Xanura or ZigBee. FCDomus supports even a mix of systems !
FCDomus®
Newversion 2
FCDomus does NOT require a PC because it only needs a small FieldCommander embedded server. Your reseller can advise you about the best FieldCommander model for you.
FCDomus is available for many I/O systems like KNX/EIB; ZigBee, EnOcean, Z-Wave, X10, Modbus or Kadex. Also many wireless systems are supported. And even using a mix of I/O
I
V2010-b
Define easily ambiances(scenes/lifestyles) and the relation between sensors and devices. A
FCDomus allows you to create displays or reports on your PC, iPod or PDA.
The system is webbased and can easily be configured with a PC. Project examples are
Critical tasks in FCDomus are restricted for power users with a secure account.
With FCDomus your don’t need a separate timer; DCF time receiver; IP-module or logic
FCDomus can be extended with for example remote control with your mobile phone or speech
FCDomus is compliant with domotica standards EN50090 and
ISO/IEC 14543-3.
FCDomus®
domotica software:universal, flexible and powerful.
ethernet
your domotica solution
FieldCommander ®
technology
FCDomus ®
interfaces
And it all fits in a tiny box
I
The FCDomus software requires a FieldCommander unit.
FieldCommander units are available in several models.
of
And it all fits in a tiny box
domotica software:universal, flexible and powerful.
FCDomus®
Timer
• FCDomus contains an extended
scheduler supporting many timer
functiosn.
Right on time
• With FCDomus and internet you • With FCDomus and internet you
will do everything in a timely
manner.
• Also the change to Summertime
settings is done automatically.
Visualisation
• FCDomus offerse many display
and visualisation functionality.
Alert
• FCDomus offers several Alert
functions support signaling with
email or SMS.
Measurement
• Values can be logged and
graphical display is support
Embedded, NO PC needed
ethernet
your domotica solution
®
And it all fits in a tiny box
I
V2010-b
Embedded, NO PC needed
• FCDomus software operates
embedded, so NO PC is required.
Integration
• Combining several systems has
never been so easy.
Reliable
• FCDomus is based on the reliable
FieldCommander technology.
The FCDomus software requires a FieldCommander unit.
FieldCommander units are available in several models.
And it all fits in a tiny box
Overview FCDomus®
GSM
Temp.
camera
KNX/EIB,Z-Wave,EnOcean,ZigBee,ModBus
Internet
I
ModBusor a mix.
*) The shown FCDomus-version is model with 8” LCD and touchscreen.FCDomus is available in many models.
FCDomus®
PC, PDA Mediacenter
Light, shadesTemp.
KNX/EIB,Wave,
EnOcean,ZigBee,ModBus
*)I
V2010-b
MediacenterModBusor a mix.
Domotica:comfortsecurity
care/safetyeasy
FCDomus®
domotica software:Wide range of functionality
• Visualisation, display your domotica info
• on PC
• on a touchpanel
• HMI-Config: setup screen and menu’s easily
• HMI-Open: with the extra HMI-Open the layout of screens and menu’s is open for free configuration *1).
• Control the domotica system
• using a PC
• with buttons/switches• with buttons/switches
• with remote control, IR or iPod
• with remote devices like mobile phone or iPhone
• Time
• an advanced scheduler is built in
• Datalogger
• log measurement data
• display measurement info in graphs (> v2.1)
• Alert
• builtin alarming unit with email, SMS support
• Open-API: simple network integration *1)
• link for example with camera systems
• or other network systems
• Flexible and open
• supports a mix of different technologies, wired and/or wireless
• webbased, ready for the future
• Configurable control logic
I
• Configurable control logic
• using rules and functions allows basic or advanced functionality.
• Multi language support
• Dutch, English, German, Spanish
• Snapshot visitors logger *1)
• Log and View pictures of your visitors.
• MessageBox *1)
• Familymembers can send a message to the home message box.
• Presence simulation *1)
• simple and advanced presence simulation based on Memory-Repeat.
*1) Starting version 2.0
domotica software:Wide range of functionality
FCDomus®
Config: setup screen and menu’s easily
Open the layout of screens and menu’s is open for free configuration *1).
with remote devices like mobile phone or iPhone
display measurement info in graphs (> v2.1)
builtin alarming unit with email, SMS support
supports a mix of different technologies, wired
Alert included
I
V2010-b
using rules and functions allows basic or advanced
Familymembers can send a message to the home
simple and advanced presence simulation based on
FCDomus®
domotica software:Many links and open for integrationFCDomus can be linked with many sensors and devices.
• Domotica systems
• KNX/EIB
• the wireless EnOcean
• the wireless Z-Wave
• Modbus devices
• RDA (RS485) I/O modules
• micro FieldCommanders (IP-modules)
• ICT equipment
• webcamera’s
• PC, iPod, PDA
• MediaCenter
• Integration other systems
• (video)intercom
• person alarm system
• burglar alalrm system
• fire&smoke detection systems
• A/V-systems
• Sensors and actors
• movement detection sensors(PIR)
• door sensors
• smoke detectors
• doorlocks
• thermostats
• electrical curtains
• shades
And CER offers you custom made support.
I
Order info
FCDomus FCDomus software.FCDomus is available with several interface options.A SDK is available for OEM use.OEM requests for brandlabel versions are welcome.
OPEN SOURCE:
FCDomus
source code
is available !Remote control with iPod or iPhone is also possible.
domotica software:Many links and open for integration
FCDomus®
FCDomus can be linked with many sensors and devices.
modules)
Integration
• FCDomus is a great tool for
integration.
Browser support
• FieldCommander, the FCDomus
technology, support many
webbrowsers, like Internet webbrowsers, like Internet
Explorer, FireFox or Safari.
Reliable
• FCDomus is based on the reliable
FieldCommander technology.
Open Source software
• Although FCDomus software is
copyright CER, the software is Open
Source and the CER licentie
supports use of the sourcecode
Custom made
• For special situations, CER can
support you with custom made
development or special services.
Media Center / TV
I
V2010-b
FCDomus is available with several interface options.
OEM requests for brandlabel versions are welcome.
OPEN SOURCE:
FCDomus
source code
is available !
Media Center / TV
• FCDomus can be used from a
Windows MCE Media Center.
OEM support
• Contact CER for special language
versions or brand labeling.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
This page intentionally left blankThis page intentionally left blank
V2010-b
ApplicationsB
CER® Service CentreC
uFC; micro FieldCommandersD
FieldCommander® softwareE
FieldCommander® hardware platformsF
CER®, the companyA
Back to TOC
FieldCommander hardware platformsF
FieldCommander® modelsG
FieldCommander® optionsH
FCDomus®; domotica applicationI
FCGateway; tool for linking systems
FCGateway
FCGateway®; gateway toolJ
Embedded ControllersK
AccessoriesL
ServicesM
General ConditionsN
B
Service Centre C
uFC; micro FieldCommanders® D
software E
hardware platforms F
, the company A
hardware platforms F
models G
options H
; domotica application I
FCGateway; tool for linking systems
FCGateway®
; gateway tool J
V2010-b
Embedded Controllers K
L
M
N
FCGateway®: tool for linking systems
FCGateway
J
: tool for linking systems
FCGateway®
J
V2010-b
FCGateway®: your universal gateway tool
The FieldCommander technology can be used for creating interface gateways.
FCGateway is software to config and manage these gateway interface application.
FCGateway is an universal gateway for exchanging data between systemsystem-B and managing the protocol translation
Protocol-A
FCGateway
Connectivity and interfacingFCGateway does NOT require a PC because it only needs a small FieldCommander embedded server. Your reseller can advise you about the best FieldCommander model for you.
FCGateay supports many I/O systemsFCGateway is available for many I/O systems like KNX/EIB; ZigBee, EnOcean, ZModbus or Kadex. Also many wireless systems are supported.
FunctionalityDefine the translation from one protocol to another protocol easilly
Translationtables
FCGateway
SetupJ
Define the translation from one protocol to another protocol easillyFor example: outside temperature from a Modbus device must be translated to a value for KNX device 1/2/3.
LoggingFCGateway allows you to check the logging of the gateway.
EasyThe system is webbased and can easily be configured with a PC.
ReliableFCGateway is based on reliable FieldCommander technology with a famless device with no moving parts.
SecurityCritical tasks in FCGateway are restricted for power users with a secure account.
SavingsWith FCGateway you have a low cost gateway solutions.
OptionsFCGateway can be extended with for example remote messaging (SMS) to your mobile phone.
: your universal gateway tool
The FieldCommander technology can be used for creating interface gateways.
FCGateway is software to config and manage these gateway interface application.
FCGateway is an universal gateway for exchanging data between system-A and
Protocol-B
FCGateway®
FCGateway®
FCGateway does NOT require a PC because it only needs a small FieldCommander embedded server. Your reseller can advise you about the best FieldCommander model for you.
FCGateway is available for many I/O systems like KNX/EIB; ZigBee, EnOcean, Z-Wave, X10, Modbus or Kadex. Also many wireless systems are supported.
Define the translation from one protocol to another protocol easilly
Translation
FCGateway®
J
V2010-b
Define the translation from one protocol to another protocol easillyFor example: outside temperature from a Modbus device must be translated to a value for KNX
FCGateway allows you to check the logging of the gateway.
The system is webbased and can easily be configured with a PC.
FCGateway is based on reliable FieldCommander technology with a famless device with no
Critical tasks in FCGateway are restricted for power users with a secure account.
With FCGateway you have a low cost gateway solutions.
FCGateway can be extended with for example remote messaging (SMS) to your mobile phone.
FCGateway®
gateway tool:
Controller Interface-options
FC-Gateway bundles
FC3700
FC3722
FC3724
FC3732
FC3734
FCopt020;Glx
FCopt031;KNX
FCopt035;KnxIP
FCopt160;Espa
FCopt151;Eno
FCopt220; SIP
Gateway bundles:
• FCGW1100; EnOcean <> KNX/EIB gateway
• FCGW1200; Galaxy Alarm > KNX/EIB gateway
FC3700
FC3722
FC3724
FC3732
FC3734
FCopt020
FCopt031
FCopt035
FCopt160
FCopt151
FCopt220
FCGW1100 o o o o X o X o o X o o o
FCGW1200 o o o X o X X o o o o o o
FCGW1300 o o o X o o X o X o o o o
FCGW1400 o o o X o o o o X o X o o
FCGW1500 o o o X o o o o X o o o o
FCGW1600 o X o o o o X o o o o X o
FCGW1700 o X o o o o X X o o o X o
Example:
Gateway bundle FCGW1100 (EnOcean <> KNX/EIB)
• FC3734 controller
• FCopt031; KNX interafce option
• FCopt151; EnOcean option
• FCGateway; the script software
J
Order info
FCGW1xxx Gateway system bundleFCGateway is available in several bundleA SDK is also available for OEM use.OEM requests for brandlabel versions are welcome.
• FCGW1200; Galaxy Alarm > KNX/EIB gateway
• FCGW1300; ESPA > KNX/EIB gateway
• FCGW1400; ESPA > SIP gateway
• FCGW1500; ESPA > SMS gateway
• FCGW1600; Modbus/TCP <> KNX/EIB gateway
• FCGW1700; KNX/EIBnet-IP gateway
Your gateway is not listed ? Please call.
gateway tool:
Integration
• FCGateway is a great tool for
integration projects.
Browser support
• FieldCommander, the FCGateway
technology, support many
webbrowsers, like Internet
FCGateway®
optionsHw
FCGSM1; SMS
FCopt017;M
odb
FCoptxxx
Sw
FCGateway
FCGateway®
webbrowsers, like Internet
Explorer, FireFox or Safari.
Reliable
• FCGateway is based on the
reliable FieldCommander
technology. Fanless, no rotating
parts.
Open Source software
• Although FCGateway software is
copyright CER, the software is Open
Source and the CER license
supports use of the sourcecode
Custom made
• For special situations, CER can
support you with custom made
development or special services.FCGW1100; EnOcean <> KNX/EIB gateway
FCGW1200; Galaxy Alarm > KNX/EIB gateway
FCGSM1; SMS
FCopt017
FCoptxxx
o X o o X o o o o X
FCGateway
X X o o o o o o o X
o X o X o o o o o X
o o o X o X o o o X
o o o X o o o o X X
o X o o o o X o o X
o X X o o o X o o X
(EnOcean <> KNX/EIB) contains:
J
V2010-b
FCGateway is available in several bundle-configurations.A SDK is also available for OEM use.OEM requests for brandlabel versions are welcome.
OPEN SOURCE:
FCGateway
source code
is available !
OEM support
• Contact CER for special language
versions or brand labeling.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FCGW1200; Galaxy Alarm > KNX/EIB gateway
FCGW1600; Modbus/TCP <> KNX/EIB gateway
This page intentionally left blankThis page intentionally left blank
V2010-b
ApplicationsB
CER® Service CentreC
uFC; micro FieldCommandersD
FieldCommander® softwareE
FieldCommander® hardware platformsF
CER®, the companyA
Back to TOC
FieldCommander hardware platformsF
FieldCommander® modelsG
FieldCommander® optionsH
FCDomus®; domotica applicationI
FCGateway®; gateway toolJ
Embedded ControllersKEmbedded Controllers; 5 software families• FieldCommander I/O controller; see chapter
• HMI: Display; Interact panel support
• ES; Embedded Systems
• ELS: Embedded Linux Server
• EWS: Embedded Windows System
AccessoriesL
ServicesM
General ConditionsN
• EWS: Embedded Windows System
B
Service Centre C
uFC; micro FieldCommanders® D
software E
hardware platforms F
, the company A
hardware platforms F
models G
options H
; domotica application I
; gateway tool J
Embedded Controllers KEmbedded Controllers; 5 software familiesFieldCommander I/O controller; see chapter-E
HMI: Display; Interact panel support
ELS: Embedded Linux Server
EWS: Embedded Windows System
V2010-b
L
M
N
EWS: Embedded Windows System
FieldCommander I/O controller
HMI consoles for Display&Control
Embedded Controllers; 5 software families
FC
HMI
Embedded Systems
Embedded Linux Server
Embedded Windows System
ES
EWS
ELS
HMIxxxxFCxxxx
K
Interfaces*
CER hardware platforms
I/O* Audio*
HMIxxxx
HMI-webbrowser
TCP/IP-interf.*SIP-client*touchscreen
FieldCommanderI/O controller toolbox
FCGateway
FCxxxx
FCDomusYour
FC App.
FieldCommander I/O controller
HMI consoles for Display&Control
Embedded Controllers; 5 software families
Embedded Systems
Embedded Linux Server
Embedded Windows System
EWSxxxxxxxx ESxxxx ELSxxxx
K
V2010-b
flashdisk
CER hardware platforms
Audio* IP/ethernet*
EWSxxxx
Win-XPe
YourWin32App.
xxxx
-setwebbrowser
interf.*client*
touchscreen
ESxxxx
ES-setdedicatedembeddedsystems
ELSxxxx
Linux
YourLinuxApp.
Highlights
The ESAS200 is an Access Station for network based access control and intercom at your front door.It is fully IP-based and open for project integration.This Access Station is a great match for FCDomus, the FieldCommander based domotica controller.
ESAS200: Access Station with VoIP+CamIP based building access control system.
Reliable, flexible, and easy to integrate
LAN
SIP/VoIP
K
Based on their embedded controller technology, CER created an advanced access station with VoIP and access control.
The ESAS200 can be easily integrated in total building applications.
Applications
• Access control station
• Talk/listing over IP (SIP based VoIP)
• Door intercom with video camera
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
ESAS200 Access Station 200
ESAS200 in mailbox
Software
• Equipped with SIP client sotware
• echo cancelling implemented
• access control included
Hardware
• Loudspeaker
The ESAS200 is an Access Station for network based access control and intercom at your front door.
based and open for project integration.This Access Station is a great match for FCDomus, the FieldCommander based domotica controller.
ESAS200: Access Station with VoIP+CamIP based building access control system.
ESAS200
• Loudspeaker
• handsfree microphone
• color camera
• output-1 for door
• output-2 for light
• embedded linux controller;
• fanless
• network: 10/100Mbps ethernet
• Size: 242H x158W x180D mm
• Material: aluminum, color silver
• Compact, weight: ca. 1 Kg
Power supply.
• Power supply 10-5DC or12-18VAC
Support.
• SIP server required in network
Options.
CER K
V2010-b
Based on their embedded controller technology, CER created an advanced access station with VoIP and access control.
The ESAS200 can be easily integrated in total building applications.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• Camera logging; snapshot picture logging or videostream logging possible, depending on software options.
• Fingerprint scanner
• Pass (proximity/mifare) reader
• Number keypad
• SIP to GSM gateway.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
ESAS200 in mailbox
Highlights
The ESCS200 is a Common Station. A Common Station is required in FCEntercom application (IP videointercom) as a directory-server and communication router.A Common Station is the main component of a FCEntercom application, dealing with the setup of all SIP calls in the network. Although the Common Station is the most important part of the system, it only handles call setup and call tear down. It does not
ESCS200: Common Station with SIPIP based SIP server.
Reliable, flexible, and easy to integrate
handles call setup and call tear down. It does not actually transmit or receive any audio. This is done by the other devices directly.
LAN
SIP/VoIP
ESCS200AccessStation
K
Based on their embedded controller technology, CER created an advanced access station with VoIP and access control.
The ESCS200 can be easily integrated in total building applications.
We know, several SIP servers are available on the market, still the
Enterprise Feature Interoperability is rough and so we advice to use the ESCS200.
Applications
• Access control station
• Talk/listing over IP (SIP based VoIP)
• Door intercom with video camera
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
ESCS200 Common Station 200
Software
• Equipped with Linux OS and SIP server sotware
IP support
• ESCS200 is IP(Internet Protocol)
based and supports Call setup
The ESCS200 is a Common Station. A Common Station
A Common Station is the main component of a FCEntercom application, dealing with the setup of all SIP calls in the network. Although the Common Station is the most important part of the system, it only handles call setup and call tear down. It does not
ESCS200: Common Station with SIP-server
ESCS200
based and supports Call setup (SIP). Call transport (RTSP
and RTP) is done by EndPoints.
Hardware
• Hardware based on the powerful
FieldCommander HW10B
platform.
Please check the HWP10 data
sheet for more detailed info.
Hardware accessories.
• DIN-rail clips included
Options.
• Powersupply
• Forward service to external wireless SIP phones.
• SIP to GSM gateway.
handles call setup and call tear down. It does not actually transmit or receive any audio. This is done by
CER
HomeStation
K
V2010-b
Based on their embedded controller technology, CER created an advanced access station with VoIP and access control.
The ESCS200 can be easily integrated in total building applications.
We know, several SIP servers are available on the market, still the
Enterprise Feature Interoperability is rough and so we advice to
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Highlights
The ESNVR40 is a digital videorecorder for your network. With the ESNVR40 you can log video recordings triggered by external events.Many sensors or interfaces can be used for triggering the video registration. Supports pretriggering.Small dimensions, great performance and low energy use (can even be used with battery).
ESNVR40: Network Video RecorderIntelligent video recorder for IP
Reliable, flexible, and easy to integrate
K
Based on their embedded controller technology, CER created an advanced video recorder. The NVR can be easily integrated in applications.
For higher picture quality the NVR supports the Motion Jpeg format.
Applications
• Link video registration to your burglar alarm.
• Log the entrance of your shop/building visitor.
• Extend access control with video logging
• Log cash register actions on video
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
ESNVR40 Network Video Recorder 40GB
Software
• Equipped with Network Video Recording software
Hardware
• embedded controller; 1GHz CPU
• fanless
The ESNVR40 is a digital videorecorder for your network. With the ESNVR40 you can log video
Many sensors or interfaces can be used for triggering the video registration. Supports pretriggering.Small dimensions, great performance and low energy
ESNVR40: Network Video RecorderIntelligent video recorder for IP-networks.
ESNVR40
• fanless
• harddisk; can be extended
• network: 10/100Mbps ethernet
• Size: 50H x275W x172D mm
• Material: aluminum, color black
• Compact, weight: ca. 2 Kg
Hardware accessories incl.
• Power supply 230V
Software/hardware limits
• max. 8 IP camera’s
• 40 GB storage
Camera support
• many camera models supported
• PTZ supported for some cam types
• camera’s NOT included
K
V2010-b
Based on their embedded controller technology, CER created an advanced video recorder. The NVR can be easily integrated in
For higher picture quality the NVR supports the Motion Jpeg
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
Options.
• available with other disksizes.
• Also available in outdoor version with WiFi.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Highlights
The ESSIPGSM is a gateway for linking SIP based VoIP communication to mobile users over the GSM network.This gateway supports 2 GSM channels (requiring 2 SIM cards).
ESSIPGSM: SIP gateway to GSMTransfer VoIP calls to mobile phone users.
Reliable, flexible, and easy to integrate
Based on embedded controller technology. The gateway can be easily integrated in projects.
Communication
# Connection with DTMF dial in
GSM net
LAN
SIP/VoIP
K
# Connection with DTMF dial in# Connection to 2 operators after time out for direct dialling in# Transmission of calling party number (CLIP)# Incomming call restriction from GSM network# Outgoing call restriction to GSM network# Priority connection through either 1st or 2nd GSM module (LCR)# Smart Call Back; Automatic calls routing according to CLIP# Direct access; Assignment of IP address to GSM channels# Echo canceller; Switching ON/OFF# Selection of a specific GSM provider for each GSM module# PIN protection of SIM cards
Applications
• Forward doorstation calls to mobile users remotely.
• Cost reduction device; link outdoor employees to office VoIP system
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
ESSIPGSM SIP gateway to GSMESSIPOGM OGM (OutGoingMessage) module; optie
IP-PBX link
• This Gateway can be connected to any VoIP Switch or IP PBX.
• Tested on:
• Cisco Call Manager
• Alcatel OmniPCX
• Asterisk
• Nexspan
• Panasonic
• 2 VoIP channels
The ESSIPGSM is a gateway for linking SIP based VoIP communication to mobile users over the GSM network.This gateway supports 2 GSM channels (requiring 2 SIM
ESSIPGSM: SIP gateway to GSMTransfer VoIP calls to mobile phone users.
Based on embedded controller technology. The gateway can be
ESSIPGSM
• 2 VoIP channels* (2 IP addresses)
• 2 GSM channels• Codecs
• G.711u• G.711a• G.726• GSM
• VAD* (echo cancellation)
Protocol
• IP
• TCP
• UDP
• http
• TELNET
• SIP
• RTP
Hardware
• SIM card required; NOT included.
• fanless; embedded controller;
GSM net
K
V2010-b
# Connection to 2 operators after time out for direct dialling in
# Priority connection through either 1st or 2nd GSM module (LCR)# Smart Call Back; Automatic calls routing according to CLIP# Direct access; Assignment of IP address to GSM channels
# Selection of a specific GSM provider for each GSM module
Forward doorstation calls to mobile users remotely.
Cost reduction device; link outdoor employees to office VoIP system
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• fanless; embedded controller;
• network: 10/100Mbps ethernet
• Size: 133 x 233 x 60 mm
• Material: aluminum, color black
• Compact, weight: ca. 0.9 Kg
Hardware accessories incl.
• Power supply 230V
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected] (OutGoingMessage) module; optie
Highlights
The ESuBTS1 is a Base Transceiver Station for creating your own local GSM network. You can use your own GSM phones (1800MHz) and call locally without an external operator and so without costs.This controller supports the 1800MHz GSM channels.
ESuBTS1: micro BTSCreate your own IP based GSM pico cell
Reliable, flexible, and very powerful
Based on embedded controller technology. The controller can be easily integrated in projects.
Communication
# Connection-A: IP/VoIP
Local GSM net !
LAN; SIP/VoIP
ESuBTS
GSM phone examples
(Picocell)
K
# Connection-A: IP/VoIP# Connection-B: GSM network# Transmission over licensed 1800 MHz band (1877.5(Jan 1st. 2009, the DECT guardband is released in The Netherlands;
Licence exempt use; 14 channels 872-885; 1 ch =14 voice timeslots) # Several ESuBTS1 stations can be used over the LANnetwork. For example you can place a ESuBTS1 in every shopand link them all together.
Applications
• Forward doorstation calls to mobile users remotely.
• Cost reduction device; link outdoor employees to office VoIP system
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
ESuBTS1 Micro BTS controller 1800MHz GSM
IP-GSM BTS
• Single TRX picocell
• Um radio 1800MHz; max. 200mW
• TX power for GMSK: +23dBm for 1800MHz
• TX power for 8PSK: +13dBm for 1800MHz
• Integrated Omni antennas
• Single CAT5 Ethernet connection
• Connects to standard LAN
The ESuBTS1 is a Base Transceiver Station for creating your own local GSM network. You can use your own GSM phones (1800MHz) and call locally without an
This controller supports the 1800MHz GSM channels.
Create your own IP based GSM pico cell-network.
Based on embedded controller technology. The controller can be
ESuBTS1
• Connects to standard LAN
• Uses existing IP infrastructure for backhaul
• Static and dynamic power control
• 13W power consumption, via PoE
Protocol
• IP; SIP; Abis-over-IP
Support
• GSM phone support: all phones with 1800MHz band are supported; so also the iPhone or the Sonim.
• Support max. 7 concurrent voice conversations.
• Use autoconnect GSM phones for auto access registration
• Range Indoor: 50 - 100 m.
• Range Outdoor: 300 m.
• Extend over the IP-LAN.
• SIM required; NOT used.
• fanless; embedded controller;
• network: 10/100Mbps ethernet
Local GSM net !
GSM phone examples
(Picocell)
K
V2010-b
# Transmission over licensed 1800 MHz band (1877.5-1880 MHz)(Jan 1st. 2009, the DECT guardband is released in The Netherlands;
885; 1 ch =14 voice timeslots) # Several ESuBTS1 stations can be used over the LAN- or WAN-network. For example you can place a ESuBTS1 in every shop
Forward doorstation calls to mobile users remotely.
Cost reduction device; link outdoor employees to office VoIP system
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• network: 10/100Mbps ethernet
• Size: 222(H)x291(W)x63(D) mm
• Material: plastic
• Compact, weight: ca. 2.0 Kg
Hardware accessories incl.
• Power supply 230V;
• PoE supported
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Highlights
The HMI421x is intended for applications where a modern user interface is required. This device is great for user interfaces with touchscreen and audio communication like door stations.Visualization, intercom and access control is very popular with this model.The included HMI-software is a complete toolset for your project applications. You can combine it with an I/O controller like a FieldCommander.
HMI + intercom console HMI421x:Web userinterface+IP-phone with built in 12/15” LCD/TS
Applications
Doorstation; Door intercom system
K
Doorstation; Door intercom system
Entrance controller with doorphone
Visualization of building
Extra Userinterface for FieldCommander I/O controllers.
Webcontroller with software Framework for e-ApplicationsFieldCommander technology is a platform to create IPapplications. With the included HMI embedded software tools it is easy to setupuserinterfaces and video/audio communication.
Reliable, flexible and easy to useBased on the FieldCommander hardware platfforms, with fanless technology and solid state disks and advanced -and in the market already proven- software the result is a reliable but still flexible solution.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
HMI4212 HMI + intercom Console; 12” LCD+TSHMI4215 HMI + intercom Console; 15” LCD+TSFCoptDP2 DoorPhone handset option
Software
• HMI software set with embedded webbrowser, touchscreen support , IP-telephone client and FCEnet-support is included.
Software accessories incl.
The HMI421x is intended for applications where a modern user interface is required. This device is great for user interfaces with touchscreen and audio
Visualization, intercom and access control is very
software is a complete toolset for your project applications. You can combine it with an
HMI + intercom console HMI421x:phone with built in 12/15” LCD/TS
HMI421x
• Embedded browser
• Touchscreen driver
• Virtual keyboard
• IP-telephone (VoIP/SIP)
Hardware
• Hardware is based on the fanless
FieldCommander HW9
platform.
Please check the HWP9 data
sheet for more detailed info.
Panel mount
Hardware accessories.
• Power supply 230V included
• Many options available
Options.
K
V2010-b
Extra Userinterface for FieldCommander I/O controllers.
ApplicationsFieldCommander technology is a platform to create IP-based(web) applications. With the included HMI embedded software tools it is easy to setupuserinterfaces and video/audio communication.
Based on the FieldCommander hardware platfforms, with fanless and in the market
software the result is a reliable but still flexible
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• Powersupply
• Larger flash disk
• extra I/O-ports
• WiFi module..
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
HMI + intercom Console; 12” LCD+TSHMI + intercom Console; 15” LCD+TS
Highlights
The HMI4408 is intended for applications where a modern user interface is required. This device is great for user interfaces with touchscreen and it also support audio communication over IP for door stations.Visualization, intercom and access control is very popular with this model.The included HMI-software is a complete toolset for your project applications. You can combine it with an I/O controller like a FieldCommander.
HMI + intercom console HMI4408:Web userinterface+IP-telephone with built in 8.4” LCD/TS
Applications
Doorstation; Door intercom system
CER
K
Doorstation; Door intercom system
Entrance controller with doorphone
Visualization of building
Extra Userinterface for FieldCommander I/O controllers.
Webcontroller with software Framework for e-ApplicationsFieldCommander technology is a platform to create IPapplications. With the included HMI embedded software tools it is easy to setupuserinterfaces and video/audio communication.
Reliable, flexible and easy to useBased on the FieldCommander hardware platfforms, with fanless technology and solid state disks and advanced -and in the market already proven- software the result is a reliable but still flexible solution.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
HMI44C08 HMI + intercom Console; 8.4”
Software
• HMI software set with embedded webbrowser, touchscreen support , IP-telephone client and FCEnet-support is included.
Software accessories incl.
The HMI4408 is intended for applications where a modern user interface is required. This device is great for user interfaces with touchscreen and it also support audio communication over IP for door stations.Visualization, intercom and access control is very
software is a complete toolset for your project applications. You can combine it with an
HMI + intercom console HMI4408:telephone with built in 8.4” LCD/TS
HMI4408
• Embedded browser
• Touchscreen driver
• Virtual keyboard
• IP-telephone (VoIP/SIP)
Hardware
• Hardware is based on the fanless
FieldCommander HW14C
platform.
Please check the HWP14C data
sheet for more detailed info.
Panel mount
Hardware accessories.
• Power supply 230V included
• Many options available
Options.
K
V2010-b
Extra Userinterface for FieldCommander I/O controllers.
ApplicationsFieldCommander technology is a platform to create IP-based(web) applications. With the included HMI embedded software tools it is easy to setupuserinterfaces and video/audio communication.
Based on the FieldCommander hardware platfforms, with fanless and in the market
software the result is a reliable but still flexible
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• Powersupply
• Larger flash disk
• extra I/O-ports
• WiFi module..
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Highlights
The HMI4508 is intended for applications where a modern user interface is required. This device is great for user interfaces with touchscreen and it also support audio communication over IP for door stations.Visualization, intercom and access control is very popular with this model. The front is flat bessel display.The included HMI-software is a complete toolset for your project applications. You can combine it with an I/O controller like a FieldCommander.
HMI + intercom console HMI4508:Web userinterface+IP-telephone with built in 8” LCD/TS
Applications
Doorstation; Door intercom system
K
Doorstation; Door intercom system
Entrance controller with doorphone
Visualization of building
Extra Userinterface for FieldCommander I/O controllers.
Webcontroller with software Framework for e-ApplicationsFieldCommander technology is a platform to create IPapplications. With the included HMI embedded software tools it is easy to setupuserinterfaces and video/audio communication.
Reliable, flexible and easy to useBased on the FieldCommander hardware platfforms, with fanless technology and solid state disks and advanced -and in the market already proven- software the result is a reliable but still flexible solution.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Order info
HMI45A08 HMI + intercom Console; 8”
Software
• HMI software set with embedded webbrowser, touchscreen support , IP-telephone client and FCEnet-support is included.
Software accessories incl.
The HMI4508 is intended for applications where a modern user interface is required. This device is great for user interfaces with touchscreen and it also support audio communication over IP for door stations.Visualization, intercom and access control is very popular with this model. The front is flat bessel display.
software is a complete toolset for your project applications. You can combine it with an
HMI + intercom console HMI4508:telephone with built in 8” LCD/TS
HMI4508
• Embedded browser
• Touchscreen driver
• Virtual keyboard
• IP-telephone (VoIP/SIP)
Hardware
• Hardware is based on the fanless
FieldCommander HW15A
platform.
Please check the HWP15A data
sheet for more detailed info.
Panel mount
Hardware accessories.
• Power supply 230V included
• Many options available
Options.
K
V2010-b
Extra Userinterface for FieldCommander I/O controllers.
ApplicationsFieldCommander technology is a platform to create IP-based(web) applications. With the included HMI embedded software tools it is easy to setupuserinterfaces and video/audio communication.
Based on the FieldCommander hardware platfforms, with fanless and in the market
software the result is a reliable but still flexible
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• Powersupply
• Larger flash disk
• extra I/O-ports
• In-wall case
• decoration kit
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
ELS1700: compact Embedded Linux Server
Highlights
ELS1700 is a complete webcontroller for installing linux applications:
* complete hardware
* complete box
* complete server software (linux distribution)
Linux is very popular. The ELS1700 makes it even easier for you; supporting you with a low-cost complete toolbox.
Platform for e-Applications.
K
If you want to create a firewall, a router, a SAN-server, a communication server (Asterisk), a backupserver (Rsync) or an email tool or whatever web or controller application that has your interest, you can probably create it on an ELS1700 device.
Reliable, flexible and easy to use
If your application requires a lot of interfacing with sensors or other devices, or your application must be handling several fieldbus protocols we suggest you to select the FieldCommander version of this device.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
ELS1700: compact Embedded Linux Server Network
ELS1700
Software
• Based on standard
Linux (Debian) distribution software
with complete LAMP (Linux 2.6.x),
Apache, MySQL, PHP) configuration.
ELS1700 is a complete webcontroller for installing linux
* complete server software (linux distribution)
Linux is very popular. The ELS1700 makes it even easier cost complete
Hardware
• Based on the compact
FieldCommander HW10C-platform.
Please check the HWP10 datasheet
for more detailed info.
Usercontrol based on serial console.
Hardware accessories.
• DIN rail mounting clips
Options.
• Powersupply
• WiFi extension 11/54Mbps
• keyboard (USB)
• mouse (USB)
• videomonitor (VGA)
K
V2010-b
server, a communication server (Asterisk), a backupserver (Rsync) or an email tool or whatever web or controller application that has your interest, you can probably create it on an ELS1700 device.
If your application requires a lot of interfacing with sensors or other devices, or your application must be handling several fieldbus protocols we suggest you to select the FieldCommander
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• videomonitor (VGA)
• larger flash disk
ELS1700: the hardware
CPU: AMD GEODE
CLOCKPOWER
PCIinterface
CS5536
IDE
2xUART
I2C
ETHERNET
VT6105
Mini-PCI
10/100BaseT
COMPACT
FLASH
RS232
www.CER.com
K
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Hardware
The schematic diagram of the ELS1700 hardware.
I2C
4xUSB
USB
ELS1700
CPU: AMD GEODE-LX
RAM
256MB
interface
CS5536
LPC
IO
RTC
BIOS
Flash
Batt.
I/O
DISPLAY VGA
www.CER.com
K
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
The schematic diagram of the ELS1700 hardware.
RTC
AC97
Batt.
AIO
ELS1700: the software
Linux distribution components
• BIOS with serial console• Linux kernel, v 2.6• webserver; Apache• SQL database; MySQL• PHP v5• Webmin maintenance tool• PHPMyAdmin; maintenance tool for MySQL• PHPMyAdmin; maintenance tool for MySQL• Serial Console;All output is redirected to serial console
• SSH Console• Upgradable
Platform for e-Applications
If you want to create a firewall, a router, an email tool or whatever web or controller application that has your interest, you can probably create it on an ELS1700 device.
Reliable, flexible
The combination of the reliable industrial fanless CER hardware patforms and the reliable Linux software garantees a longtime reliable use.
K
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Highlights
ELS1700 is a complete toolbox platform to create an advanced controller.
Order info
ELS1700 ELS1700; compact Embedded Linux ServerFCWiFi1 Option: WiFi miniPCI 802.11a/b/g 54/108 MbpsFCPwr10 Powersupply for HWP10/11 (euro-plug)FCPwr10UK Powersupply for HWP10/11 (UK)
ELS1700
Reliable
• Linux is recognized as
a reliable software platform.
Long life cyclePHPMyAdmin; maintenance tool for MySQL Long life cycle
• Linux is available
for many years.
Content
• Linux distribution Debian
Support
• Linux is OpenSource based
and so worldwide
many people can support you
with Linux or Linux applications.
PHPMyAdmin; maintenance tool for MySQL
If you want to create a firewall, a router, an email tool or whatever web or controller application that has your interest, you can probably create it on an
The combination of the reliable industrial fanless CER hardware patforms and the reliable Linux software
K
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
ELS1700 is a complete toolbox platform to create
ELS1700; compact Embedded Linux ServerOption: WiFi miniPCI 802.11a/b/g 54/108 Mbps
plug)
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
ELS1800: compact Embedded Linux Server
Highlights
ELS1800 is a complete webcontroller for installing linux applications:
* complete hardware
* complete box
* complete server software (linux distribution)
Linux is very popular. The ELS1800 makes it even easier for you; supporting you with a low-cost complete toolbox.
Platform for e-Applications.
K
If you want to create a firewall, a router, a SAN-server, a communication server (Asterisk), a backupserver (Rsync) or an email tool or whatever web or controller application that has your interest, you can probably create it on an ELS1800 device.
Reliable, flexible and easy to use
If your application requires a lot of interfacing with sensors or other devices, or your application must be handling several fieldbus protocols we suggest you to select the FieldCommander version of this device.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
ELS1800: compact Embedded Linux Server Network
ELS1800
Software
• Based on standard
Linux (Debian) distribution software
with complete LAMP (Linux 2.6.x),
Apache, MySQL, PHP) configuration.
ELS1800 is a complete webcontroller for installing linux
* complete server software (linux distribution)
Linux is very popular. The ELS1800 makes it even easier cost complete
Hardware
• Based on the compact
FieldCommander HW11B-platform.
3x LAN !!
Please check the HWP11 datasheet
for more detailed info.
Usercontrol based on serial console.
Hardware accessories.
• DIN rail mounting clips
Options.
• Powersupply
• WiFi extension 11/54Mbps
• keyboard (USB)
• mouse (USB)
K
V2010-b
server, a communication server (Asterisk), a backupserver (Rsync) or an email tool or whatever web or controller application that has your interest, you can probably create it on an ELS1800 device.
If your application requires a lot of interfacing with sensors or other devices, or your application must be handling several fieldbus protocols we suggest you to select the FieldCommander
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• mouse (USB)
• videomonitor (VGA)
• larger flash disk
ELS1800: the hardware
CPU: AMD GEODE
CLOCKPOWER
PCIinterface
CS5536
IDE
2xUART
I2C
Mini-PCI
COMPACT
FLASH
RS232
ETHERNET
VT6105
10/100BaseTETHERNET
VT6105ETHERNET
VT6105
www.CER.com
K
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Hardware
The schematic diagram of the ELS1800 hardware.
I2C
4xUSB
USB
ELS1800
CPU: AMD GEODE-LX
RAM
256MB
interface
CS5536
LPC
IO
RTC
BIOS
Flash
Batt.
I/O
DISPLAY VGA
www.CER.com
K
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
The schematic diagram of the ELS1800 hardware.
RTC
AC97
Batt.
AIO
ELS1800: the software
Linux distribution components
• BIOS with serial console• Linux kernel, v 2.6• webserver; Apache• SQL database; MySQL• PHP v5• Webmin maintenance tool• PHPMyAdmin; maintenance tool for MySQL• PHPMyAdmin; maintenance tool for MySQL• Serial Console;All output is redirected to serial console
• SSH Console• Upgradable
Platform for e-Applications
If you want to create a firewall, a router, an email tool or whatever web or controller application that has your interest, you can probably create it on an ELS1800 device.
Reliable, flexible
The combination of the reliable industrial fanless CER hardware patforms and the reliable Linux software garantees a longtime reliable use.
K
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Highlights
ELS1800 is a complete toolbox platform to create an advanced controller.
Order info
ELS1800 ELS1800; compact Embedded Linux ServerFCWiFi1 Option: WiFi miniPCI 802.11a/b/g 54/108 MbpsFCPwr10 Powersupply for HWP10/11 (euro-plug)FCPwr10UK Powersupply for HWP10/11 (UK)
ELS1800
Reliable
• Linux is recognized as
a reliable software platform.
Long life cyclePHPMyAdmin; maintenance tool for MySQL Long life cycle
• Linux is available
for many years.
Content
• Linux distribution Debian
Support
• Linux is OpenSource based
and so worldwide
many people can support you
with Linux or Linux applications.
PHPMyAdmin; maintenance tool for MySQL
If you want to create a firewall, a router, an email tool or whatever web or controller application that has your interest, you can probably create it on an
The combination of the reliable industrial fanless CER hardware patforms and the reliable Linux software
K
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
ELS1800 is a complete toolbox platform to create
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
ELS1800; compact Embedded Linux ServerOption: WiFi miniPCI 802.11a/b/g 54/108 Mbps
plug)
EWS1700: compact Embedded Windows System
Highlights
EWS1700 is a compact but complete controller for installing Windows applications:
* complete hardware
* complete fanless box/enclosure
* complete OS-software (Windows Embedded Standard)- Componentized Windows® XP Pro- Win XP Driver compatibility- Win XP Application compatibility
Windows is used often. The EWS1700 makes it even easier for you, supporting you with a low-cost complete windows embedded system.
K
Platform for e-Applications.
If you want to create a Windows application server, a domotica controller (HomeSeer) or just an easy extra Internet browser, you can probably create it on an EWS1700 device.
Reliable, flexible and easy to use
If your application requires a Windows compatible platform or extra user-interface design, we suggest you to select the EWS1700 device.
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Windows is a registered trademark of Microsoft Corp.
EWS1700: compact Embedded Windows System
EWS1700
Software
• Based on Windows Embedded
Standard software (=WinXPe)
(not for desktop use)
EWS1700 is a compact but complete controller for
software (Windows Embedded Standard)Componentized Windows® XP Pro
Win XP Application compatibility
• with .NET framework 3.0 support
Hardware
• Based on the compact
FieldCommander HW10C-platform.
Please check the HWP10 datasheet
for more detailed info.
Usercontrol based on serial console.
Hardware accessories.
• DIN rail mounting clips
Options.
• Powersupply
• WiFi extension 11/54Mbps
Windows is used often. The EWS1700 makes it even easier for you, cost complete windows embedded system.
K
V2010-b
If you want to create a Windows application server, a domotica controller (HomeSeer) or just an easy extra Internet browser,
If your application requires a Windows compatible platform or interface design, we suggest you to select the
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
• WiFi extension 11/54Mbps
• keyboard (USB)
• mouse (USB)
• videomonitor (VGA)
• larger flash disk
Windows is a registered trademark of Microsoft Corp.
EWS1700: the hardware
CPU: AMD GEODE
CLOCKPOWER
PCIinterface
CS5536
IDE
2xUART
I2C
ETHERNET
VT6105
Mini-PCI
10/100BaseT
COMPACT
FLASH
RS232
www.CER.com
K
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Hardware
The schematic diagram of the EWS1700 hardware.
I2C
4xUSB
USB
EWS1700
CPU: AMD GEODE-LX
RAM
256MB
interface
CS5536
LPC
IO
RTC
BIOS
Flash
Batt.
I/O
DISPLAY VGA
www.CER.com
K
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
The schematic diagram of the EWS1700 hardware.
RTC
AC97
Batt.
AIO
EWS1700: the softwareWindows Embedded Standard=WinXP embedded SP2 F.Pack 2008
Windows XP Embedded is a specialized operating system, consisting of componentized Windows XP Professional features and an end-to-end set of development tools, for use in noncomputer (non-desktop) devices. Windows XP Embedded contains all of the features, functionality, and familiarity of WinXP Prof. and is typically used by embedded developers, system integrators, and Original Equipment Manufacturers (OEMs). WinXPe is NOT for general purpose desktop applications !
Licensing 1 Run Time image
A serialized label; the COA (Certificate of Authenticity) is affixed to the device. One Runtime Product Key is provided in the COA package, and one COA is provided per run-time license.An End User License Agreement (EULA) is part of the product and as the terms and conditions must be passed on to the end user, the EULA needs to be shipped together with the EWS1700.
K
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Brandlabeling
If an OEM Customer wishes to market and distribute an EWS1700 System under their own brand name, CER submits a Third Party Brand Names Agreement. MS requires that each TPB Agreement request must be approved in writing prior to use.
Order info
EWS1700 EWS1700; compact Embedded Windows SystemFCPwr10 Powersupply HWP10/11 (euro)FCPwr10UK Powersupply HWP10/11 (UK)
EWS1700
Long life cycle
• WinXPe is available
for many years.
Multi language
• ability to create multi-
Windows Embedded Standard=WinXP embedded SP2 F.Pack 2008
Windows XP Embedded is a specialized operating system, consisting of componentized Windows XP Professional features and
end set of development tools, for use in non-personal desktop) devices. Windows XP Embedded contains
all of the features, functionality, and familiarity of WinXP Prof. and is typically used by embedded developers, system integrators, and Original Equipment Manufacturers (OEMs). WinXPe is NOT for
lingual platforms
Content
• XPe SP2 FP2008 with
ability to install existing
win32 applications.
Tools
• Internet Explorer® 7
• Media® Player 11
• Remote Desktop
Conn. 6.0
• .NET Framework 3.0
A serialized label; the COA (Certificate of Authenticity) is affixed to the device. One Runtime Product Key is provided in the COA
time license.An End User License Agreement (EULA) is part of the product and as the terms and conditions must be passed on to the end user, the EULA needs to be shipped together with the EWS1700.
K
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
If an OEM Customer wishes to market and distribute an EWS1700 System under their own brand name, CER submits a Third Party Brand Names Agreement. MS requires that each TPB Agreement request must be approved in writing prior to use.
EWS1700; compact Embedded Windows System
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
ApplicationsB
CER® Service CentreC
uFC; micro FieldCommandersD
FieldCommander® softwareE
FieldCommander® hardware platformsF
CER®, the companyA
Back to TOC
FieldCommander hardware platformsF
FieldCommander® modelsG
FieldCommander® optionsH
FCDomus®; domotica applicationI
Embedded ControllersK
FCGateway®; gateway toolJ
AccessoriesLAccessories
ServicesM
General ConditionsN
B
Service Centre C
uFC; micro FieldCommanders® D
software E
hardware platforms F
, the company A
hardware platforms F
models G
options H
; domotica application I
Embedded Controllers K
; gateway tool J
L
V2010-b
M
N
Accesoires:Powersupplies; DC powerplugs
• DC Power plug PL1/B1(C=+)/B3(C=-)
• DC Power plug PL0101/B2(C=+)DC Power plugs
• HWP1: terminal
• HWP2: PL03(01)
• HWP4:
• DC Power plug HA (male)
•DC Power plug HB (male)
•DC Power plug PL07 DIN-plug
Pin# Signal
1,2 Vdd
3 NC; 4 GND
• HWP4:
• HWP5: HB male
• HWP6: PL01/B1
• HWP7: HA male
• HWP8:
• HWP9: HB male
• HWP10: PL01/B1 Pin# Signal
1 Vcc
2 Gnd; 3 NC
L
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Powersupplies; DC powerplugs
FC_Ass1
DC Powerplug PL03
• x
DC Power plugs
HWP1: terminal
HWP2: PL03(01)
HWP4:
CC Powerplug PL0301
• x
HWP4:
HWP5: HB male
HWP6: PL01/B1
HWP7: HA male
HWP8:
HWP9: HB male
HWP10: PL01/B1
L
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Accesoires:Powersupplies; DC powerplugs
AC Powerplug euro IEC320-C6
• matches C5
AC Powerplug euro IEC320-C8
• matches C7
Used in:
• FCpowerdesk
• FCpwrHWP2
• FCpwrHWP10U
AC Powerplug euro IEC320-C14
• matches C13
Used in:
• FCpwrHWP5
FCPWR10; AC Powerplug euro CEE 16 2 wire
AC Powerplug euro CEE 16 2 wire with POE
Used in:
• FCpwr10POE (18V;1A)
http://www.interprojekt.com.pl/powerL
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
Used in:
• FCpwr10 (18V;1A)
Powersupplies; DC powerplugs
FC_Ass2
AC Powerplug euro CEE 16 2 wire with POE
Used in:
FCpwr10POE (18V;1A)
http://www.interprojekt.com.pl/power-supply-with-integrated-p-564.html L
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Accesoires:Powersupplies; DC powerplugs
AC Powerplug euro IEC320-C5
AC Powerplug euro IEC320-C7L
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
AC Powerplug euro IEC320-C13
Powersupplies; DC powerplugs
FC_Ass3
• Powercord Schuko CEE7 3 wire
• Powercord Euro plug CEE16 2 wire
• Powercord UK 3 wire BSI
• Powercord USA 3 wire
Powercord USA 2 wire
L
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
Accesoires:Memory options
• Standardoperation: -0C..+70Cnon-operation: -20C…+80Cvibration: 15Gshock: 2000G
256MB
• HWP1 SDRAM
FC
• HWP2 SDRAM
FC
• HWP3 SDRAM
FC
• HWP4 SDRAM
bv Kingston
• HWP5 FCRAM256MB; DIMM PC133 low profile
bv Kingston KVR133X64C3L/256
• HWP6 SDRAM
FC
• HWP7 SDRAM
bv ?
• HWP8 DIMM
FC
• HWP9 FCRAMb256MB; DIMM DDR 256/PC2100
L
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
• HWP9 FCRAMb256MB; DIMM DDR 256/PC2100
bv Kingston KVR266X64C25/256
FC_Ass4
FCRAM256MB; DIMM PC133 low profile
FCRAMb256MB; DIMM DDR 256/PC2100
L
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FCRAMb256MB; DIMM DDR 256/PC2100
Accesoires:Compact flash options
• Standardoperation: -0C..+70Cnon-operation: -20C…+80Cvibration: 15Gshock: 2000G
• 128MB
FCCFS128
• 256MB
FCCFS256
• 512MB
FCCFS512
L
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
• 1G
FCCFS1G
FC_Ass5
•Industrialoperation: -40C..+85Cnon-operation: -50C…+95Cvibration: 15Gshock: 2000G
• 128MB
FCCFW128
• 256MB
FCCFW256
• 512MB
FCCFW512
L
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
FCCFW512
• 1G
FCCFW1G
This page intentionally left blankThis page intentionally left blank
V2010-b
ApplicationsB
CER® Service CentreC
uFC; micro FieldCommandersD
FieldCommander® softwareE
FieldCommander® hardware platformsF
CER®, the companyA
Back to TOC
FieldCommander hardware platformsF
FieldCommander® modelsG
FieldCommander® optionsH
FCDomus®; domotica applicationI
Embedded ControllersK
AccessoriesL
FCGateway®; gateway toolJ
ServicesM
CER provides many extra product or technical services.
For the CER datacentre of automated services, please Chapter “C. CER Service Centre”.
M
General ConditionsN
Chapter “C. CER Service Centre”.
B
Service Centre C
uFC; micro FieldCommanders® D
software E
hardware platforms F
, the company A
hardware platforms F
models G
options H
; domotica application I
Embedded Controllers K
L
; gateway tool J
M
CER provides many extra product or technical services.
For the CER datacentre of automated services, please Chapter “C. CER Service Centre”.
M
V2010-bN
Chapter “C. CER Service Centre”.
Services
• Sales Support
– private labeling services
– 5 year extended warranty service
• Productdevelopment• Productdevelopment
– OEM design services
• Training
– technical trainings
– workshops
• Technical Services
– Telephone product support
– OnSite system installation
M
– OnSite system installation
– Software Update service
– Preventive Maintenance Service
– RMA/Repair
Services
private labeling services
5 year extended warranty service
ProductdevelopmentProductdevelopment
OEM design services
Telephone product support
OnSite system installation
M
V2010-b
OnSite system installation
Software Update service
Preventive Maintenance Service
2010
3130292827262524232221201918171615141312111098765432131302928SSFTWTM
January
1413121110987654321SSFTWTM
March
131302928272625242322212019181716151413121110987654321302928SSFTWTM
July
September
654321313029282726252423222120191817161514131211109876543213029282726SSFTWTM
May
43213130292827262524232221201918171615141312111098
M
54321302928272625242322212019181716151413121110987654321SSFTWTM
November
3213029282726252423222120191817161514131211109876543213130SSFTWTM
September
2010
1110987654321313029SSFTWTM
April
28272625242322212019181716151413121110987654321SSFTWTM
February
October
5432131302928272625242322212019181716151413121110987654321313029282726SSFTWTM
August
2130292827262524232221201918171615141312111098765
432130292827262524232221201918171615141312111098765432131SSFTWTM
June
M
V2010-b
3130292827262524232221201918171615141312111098765432130292827SSFTWTM
October
21313029282726252423222120191817161514131211109876543213029SSFTWTM
December
This page intentionally left blankThis page intentionally left blank
V2010-b
ApplicationsB
CER® Service CentreC
uFC; micro FieldCommandersD
FieldCommander® softwareE
FieldCommander® hardware platformsF
CER®, the companyA
Back to TOC
FieldCommander hardware platformsF
FieldCommander® modelsG
FieldCommander® optionsH
FCDomus®; domotica applicationI
Embedded ControllersK
AccessoriesL
ServicesM
FCGateway®; gateway toolJ
General ConditionsNA summary of the general conditions of CERA summary of the general conditions of CER
B
Service Centre C
uFC; micro FieldCommanders® D
software E
hardware platforms F
, the company A
hardware platforms F
models G
options H
; domotica application I
Embedded Controllers K
L
M
; gateway tool J
General Conditions NA summary of the general conditions of CER
V2010-b
A summary of the general conditions of CER
General Conditions
• A summary of the CER General Conditions
• Licenses:
– On the delivered software a licence-agreement is applicable. The price gives no ownershipright. Unless otherwise explicitly agreed one licence is required per unit (system, device or machine).
• Prices:
– In Euro; excluding V.A.T. , based on current currency exchange rates of dollarinfo: on demand
• Validity:
– This offer is valid until 30 days after the offer date.
• Delivery time:• Delivery time:
– product delivery; from stock to a maximum of 4 weeks delivery time after receipt of a written purchase order.
– Application development / services: on demand
• Delivery:
– If shipment address is in The Netherlands: DDP; Delivery Duty Paid
– If shipment address is International: EXW; Ex works Roosendaal.
– Shipment charges depend on total weight of shipment and way of transportation. UPS/Fedex/DHL shipments possible if account number is provided.
• Location:
– Standard work will be done in our offices in Roosendaal. On demand and if necessary work can be done on location taken in to account that travel-time and travel and stay expenses will be additionally charged
• Invoicing:
– Invoicing of products will be done upon delivery of the products
– Invoicing of Services: will be done in terms with the 1st term upon receipt of the purchase order and the last term upon completion.
• Payment:
– In advance unless otherwise agreed.
– If payment will be done by credit card we will charge 4% processinginvoice.
– Payment on account only after credit check with payment terms 30 days net.
• Guarantee:
– You have 5 year guarantee on hardware; 1st year 100%; 2nd year 80%; 3rd year 60%; 4th year 40% en the 5th year 20%.
Nthe 5th year 20%.
– You have 1 year guarantee on the software-media (CD or flashdisk e.g.)
– You have 30 day return-guarantee on the software.
– For the support we offer 3 month free support, after this period a continuationan option.
– Regarding custom made software we offer you our expertise and effort to deliver an additional service which nevertheless may NOT be red as a resultcommitment or performance
• Cost:
– If the total amount of the invoice is < € 250,00 we will charge you with
• Bankinfo:
– Bankname: RABO Roosendaal
– Bankaddress: Laan van Limburg 2
– 4701 BP ROOSENDAAL
– The Netherlands
– SWIFTcode: RABONL2U
– Account #: 1943.05.651 tnv CER International bv
– IBAN# NL19 RABO 0194 3056 51
General Conditions
A summary of the CER General Conditions
agreement is applicable. The price gives no ownership-right but user-right. Unless otherwise explicitly agreed one licence is required per unit (system, device or machine).
In Euro; excluding V.A.T. , based on current currency exchange rates of dollar-euro. Large quantity price
This offer is valid until 30 days after the offer date.
product delivery; from stock to a maximum of 4 weeks delivery time after receipt of a written purchase
Application development / services: on demand
If shipment address is in The Netherlands: DDP; Delivery Duty Paid
If shipment address is International: EXW; Ex works Roosendaal.
Shipment charges depend on total weight of shipment and way of transportation. UPS/Fedex/DHL shipments possible if account number is provided.
Standard work will be done in our offices in Roosendaal. On demand and if necessary work can be done time and travel and stay expenses will be additionally charged
Invoicing of products will be done upon delivery of the products
Invoicing of Services: will be done in terms with the 1st term upon receipt of the purchase order and the
If payment will be done by credit card we will charge 4% processing-cost on the total amount of the
Payment on account only after credit check with payment terms 30 days net.
You have 5 year guarantee on hardware; 1st year 100%; 2nd year 80%; 3rd year 60%; 4th year 40% en
N
V2010-b
media (CD or flashdisk e.g.)
guarantee on the software.
For the support we offer 3 month free support, after this period a continuation-agreement is available as
Regarding custom made software we offer you our expertise and effort to deliver an additional service which nevertheless may NOT be red as a resultcommitment or performance-guarantee
250,00 we will charge you with € 25,- for small order cost.
1943.05.651 tnv CER International bv
NL19 RABO 0194 3056 51
This page intentionally left blankThis page intentionally left blank
V2010-b
CER
Distributors
Check the website www.cer.com for the sales contact in your region.
Development
The CER development team is capable to integrate your special requirements.
Order info: contact your local CER representative:
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER
CER innovates to support partners creating happy people
CER®
Manufacturer
CER can brand label the products for you.
.
V2010-b
Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.
CER International bvPostbus 258NL-4700 AG RoosendaalTel.: +31(0)165-557417Fax: +31(0)[email protected]
CER innovates to support partners creating happy people