centurion ndt · ized eddy current testing. these probes will operate with the ed-1100 or ed-810,...

27
Centurion NDT 1400 Yorkshire Drive Streamwood, IL 60107 www.centurionndt.com Eddy Current Probe Catalog

Upload: others

Post on 08-May-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

Centurion NDT 1400 Yorkshire Drive Streamwood, IL 60107 www.centurionndt.com

Eddy Current Probe Catalog

Page 2: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

2

Page 3: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

3

Introduction

Centurion NDT continues to strive to respond to the con-stantly changing world of Eddy Current Testing. The challenge for the successful supplier has always been to offer a complete lone of high quality instrumentation, plus a wide range of Eddy Current Probes and accesso-ries. This catalog presents the complete line of Centuri-on NDT Standard Eddy Current Probes and accesso-ries. We also have the custom design capability for your unique application requirements. Through this process we have met the challenge, and are ready to serve you as a complete supplier of Eddy Current Instrumentation and accessories. Included within this Eddy Current Probe Catalog you will find the following sections: The Centurion NDT Series of Mid-Frequency Pencil Probes can be used satisfactorily with the entire line of Centurion NDT Eddy Current Testers, and will also work with most general purpose instruments. These probes are available in a variety of lengths and shapes, and are shielded to offer excellent edge effect characteristics and good resolution. The Centurion NDT Series of High-Frequency Pencil Probes offers the ability to successfully perform special-ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz to 6 MHz. Additionally, these probes are shielded to offer excellent edge effect characteristics. The Manual Bolt Hole Series of Eddy Current Probes are offered for testing over a wide frequency range. Both the Mid-Frequency and High-Frequency Bole Hole Probes are available in a shielded configuration for ex-cellent resolution and sensitivity.

The Automated Bolt Hole Probes are designed for use with the HT-100 Automated Bolt Hole Scanning Instrument and the HS-50 Hand Held Scanner. Use of these probes with the HT-100 or HS-50 allows for high speed scanning of fastener holes. The Automated Scanner probes are widely used in aircraft maintenance and overhaul inspections. Eddy Current has become a very efficient means of in-specting aircraft wheel. Centurion NDT provides one of the most complete lines of Aircraft Wheel Bead Seat Probes available. These are molded differential probes designed for use with the Centurion NDT ED-1100, ED-810, or most general purpose Eddy Current Instruments. Wheel Probes not listed in this catalog are available upon request. Molded bead seat absolute probe holders are available for all aircraft wheels for use with the ED-530 and ED-520 series or similar instruments. Centurion NDT also offers a complete line of Eddy Current encircling coils suitable for rapid inspection of parts or material. Diameter sizes not shown are available upon request. The remaining portion of this catalog lists a variety of our special probe designs, along with a complete selection of other Eddy Current accessories such as cables, adapters and test blocks. If you would like more information on items within this cat-alog, or would like to discuss special requirements, be sure to contact our main office at (630) 736-5500 or email at [email protected]

Table of Contents

Page Page General Guide ………………………………………. 4 Wheel Bead Seat Probes …………………. 13 -19 Spartan Series Pencil Probes (Mid-Frequency) … 5 Encircling Coils ……………………………… 20 Spartan Series Pencil Probes (High-Frequency) .. 6 Surface Probes ………………………………21 - 22 Titan Series Pencil Probes (Mid-Frequency) ……. 7 Spherical and Ring Probes ………………… 23 Titan Series Pencil Probes (High-Frequency) …... 8 Counter Sink Probes ……..………………… 24 Gemini Series Pencil Probes (Differential) ………. 9 Adapters and Probe Kits …………………… 25 Spartan Series Manual Bolt Hole Probes ………. 10 Cable Assemblies ………………………….. 26 Spartan Series Manual Bolt Hole Probes ………. 10 Test Blocks ………………………………….. 27 Manual Bolt Hole Probes (High-Frequency) …….. 11 Automated Bolt Hole Probes ………………………. 12

Page 4: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

4

Technical Information

General Guide to Probe Selection

Probe Type

Absolute Pencil or Bolt-Hole Absolute Pencil or Bolt-Hole Shielded Absolute Pencil or Bolt-Hole Absolute Pencil or Bolt-Hole Shielded Differential Pencil or Bolt-Hole Shielded Differential Wheel Bead Seat Orthogonal (Cross-Coiled) Reflection Spot Rectangular

Frequency - Material Mid-Frequency 20KHz – 500KHz Aluminum - Brass – Steel Mid-Frequency 20KHz – 500KHz Aluminum - Brass - Steel High-Frequency .5MHz – 6MHz Nickel - Titanium Stainless Steel High-Frequency .5MHz – 6MHz Nickel - Titanium Stainless Steel Mid-Frequency 20KHz – 500KHz Aluminum – Brass - Steel Mid-Frequency 20KHz – 300KHz Mid-Frequency 20 KHz – 100KHz 40 Hz – 400 Hz 40 Hz – 400 Hz 40 Hz – 400 Hz

General Applications conductivity; alloy sorting and verification – surface crack detection conductivity; alloy sorting and verification – surface crack detection conductivity; alloy sorting and verification – surface crack detection conductivity; alloy sorting and verification – surface crack detection surface crack detection crack detection crack detection multi-layer inspection sub-surface cracks and corrosion alloy sorting; sub-surface cracks and corrosion alloy and conductivity changes; sub-surface cracking and internal corrosion

Comments

good sensitivity fair resolution poor edge effect superior sensitivity good resolution good edge effect good sensitivity fair resolution poor edge effect superior sensitivity good resolution good edge effect superior sensitivity good resolution good edge effect good lift-off and sensitivity; wide in-spection area excellent lift-off good sensitivity, noise and permeability suppression

Page 5: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

5

Spartan Series Pencil Probes

1/8” Diameter Ferrite Shielded Coil Microdot Connector Medium Frequency 20 KHz - 500 KHz Cable sold separately

STRAIGHT PENCIL PROBE Part No. Length 223200 2“ 223300 3“ 223400 4” 223500 5” 223600 6” 223700 7” 223800 8”

45o ANGLE CURVED PROBE

Part No. Length Drop 223345 3” .5” 223445 4” .5” 223545 5” .5” 223645 6” .5” 223745 7” .5” 223845 8” .5” 223347 3” .75” 223447 4” .75” 223547 5” .75” 223647 6” .75” 223747 7” .75” 223847 8” .75” 223341 3” 1.0” 223441 4” 1.0” 223541 5” 1.0” 223641 6” 1.0” 223741 7” 1.0” 223841 8” 1.0”

90o ANGLE CURVED PROBE

Part No. Length Drop 223395 3” .5” 223495 4” .5” 223595 5” .5” 223695 6” .5” 223795 7” .5” 223895 8” .5” 223397 3” .75 223497 4” .75” 223597 5” .75” 223697 6” .75” 223797 7” .75” 223897 8” .75” 223391 3” 1.0” 223491 4” 1.0” 223591 5” 1.0” 223691 6” 1.0” 223791 7” 1.0” 223891 8” 1.0” Mitered probes available denoted by “M” after part number, i.e. 223695M

Cable P/N 210816 is required for use with Spartan Series probes. Adapters may be required when using these probes with some instruments.

Price: $140.00

Page 6: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

6

Spartan Series Pencil Probes

1/8” Diameter Ferrite Shielded Coil Microdot Connector High Frequency 500 KHz - 6 MHz Cable sold separately

STRAIGHT PENCIL PROBE Part No. Length 224200 2” 224300 3” 224400 4” 224500 5” 224600 6” 224700 7” 224800 8”

45o ANGLE CURVED PROBE Part No. Length Drop 224345 3” .5” 224445 4” .5” 224545 5’ .5” 224645 6” .5” 224745 7” .5” 224845 8” .5“ 224347 3” .75” 224447 4” .75” 224547 5” .75” 224647 6” .75” 224747 7” .75” 224847 8” .75” 224341 3” 1.0” 224441 4” 1.0” 224541 5” 1.0” 224641 6” 1.0” 224741 7” 1.0” 224841 8” 1.0”

90o ANGLE CURVED PROBE Part No. Length Drop 224395 3” .5” 224495 4” .5” 224595 5” .5“ 224695 6” .5” 224795 7” .5” 224895 8” .5” 224397 3” .75” 224497 4” .75” 224597 5” .75” 224697 6” .75” 224797 7” .75” 224897 8” .75” 224391 3” 1.0” 224491 4” 1.0” 224591 5” 1.0” 224691 6” 1.0” 224791 7” 1.0” 224891 8” 1.0” Mitered probes available denoted by “M” after the part number, i.e. 224395M

Cable P/N 210816 is required for use with Spartan Series probes. Adapters may be required when using these probes with some instruments.

Price: $140.00

Page 7: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

7

Titan Series Pencil Probes

1/8” Diameter Ferrite Shielded Coil Triaxial LEMO Connector with integral balancing coil High Frequency 500 KHz - 6 MHz Cable sold separately

STRAIGHT PENCIL PROBE Part No. Length 228200 2” 228300 3” 228400 4” 228500 5” 228600 6” 228700 7” 228800 8”

45o ANGLE CURVED PROBE Part No. Length Drop 228345 3” .5” 228445 4” .5” 228545 5” .5” 228645 6” .5” 228745 7” .5” 228845 8” .5” 228347 3” .75” 228447 4” .75” 228547 5” .75” 228647 6” .75” 228747 7” .75” 228847 8” .75” 228341 3” 1.0” 228441 4” 1.0” 228541 5” 1.0” 228641 6” 1.0” 228741 7” 1.0” 228841 8” 1.0”

90o ANGLE CURVED PROBE Part No. Length Drop 228395 3” .5” 228495 4” .5” 228595 5” .5” 228695 6” .5” 228795 7” .5” 228895 8” .5” 228397 3” .75” 228497 4” .75” 228597 5” .75” 228697 6” .75” 228797 7” .75” 228897 8” .75” 228391 3” 1.0” 228491 4” 1.0” 228591 5” 1.0” 228691 6” 1.0” 228791 7” 1.0” 228891 8” 1.0” Mitered probes available denoted by “M” after the part number, i.e. 224395M

Cable P/N 226020 is required for use with the ED-1100 Cable P/N 226021 is required for use with the ED-800 Cable P/N 226019 is required for use with the ED-810

Price: $220.00

Page 8: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

8

Titan Series Pencil Probes

1/8” Diameter Ferrite Shielded Coil Triaxial LEMO Connector with integral balancing coil High Frequency 500 KHz - 6 MHz Cable sold separately

STRAIGHT PENCIL PROBE Part No. Length 228200 2” 228300 3” 228400 4” 228500 5” 228600 6” 228700 7” 228800 8”

45o ANGLE CURVED PROBE Part No. Length Drop 228345 3” .5” 228445 4” .5” 228545 5” .5” 228645 6” .5” 228745 7” .5” 228845 8” .5” 228347 3” .75” 228447 4” .75” 228547 5” .75” 228647 6” .75” 228747 7” .75” 228847 8” .75” 228341 3” 1.0” 228441 4” 1.0” 228541 5” 1.0” 228641 6” 1.0” 228741 7” 1.0” 228841 8” 1.0”

90o ANGLE CURVED PROBE Part No. Length Drop 228395 3” .5” 228495 4” .5” 228595 5” .5” 228695 6” .5” 228795 7” .5” 228895 8” .5” 228397 3” .75” 228497 4” .75” 228597 5” .75” 228697 6” .75” 228797 7” .75” 228897 8” .75” 228391 3” 1.0” 228491 4” 1.0” 228591 5” 1.0” 228691 6” 1.0” 228791 7” 1.0” 228891 8” 1.0” Mitered probes available denoted by “M” after the part number, i.e. 224395M

Cable P/N 226020 is required for use with the ED-1100 Cable P/N 226021 is required for use with the ED-800 Cable P/N 226019 is required for use with the ED-810

Price: $220.00

Page 9: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

9

Gemini Series Pencil Probes

1/8” Diameter Ferrite Shielded Split Differential Coil Triaxial LEMO Connector High Frequency 500 KHz - 6 MHz Cable sold separately

STRAIGHT PENCIL PROBE Part No. Length 229200 2” 229300 3” 229400 4” 229500 5” 229600 6” 229700 7” 229800 8”

45o ANGLE CURVED PROBE Part No. Length Drop 229345 3” .5” 229445 4“ .5” 229545 5” .5” 229645 6“ .5” 229745 7“ .5” 229845 8” .5” 229347 3” .75” 229447 4” .75” 229547 5” .75” 229647 6” .75” 229747 7” .75” 229847 8” .75” 229341 3” 1.0” 229441 4” 1.0” 229541 5” 1.0” 229641 6” 1.0” 229741 7” 1.0” 229841 8” 1.0”

90o ANGLE CURVED PROBE Part No. Length Drop 229395 3” .5” 229495 4” .5” 229595 5” .5” 229695 6” .5” 229795 7” .5” 229895 8” .5” 229397 3” .75” 229497 4” .75” 229597 5” .75” 229697 6” .75” 229797 7” .75” 229897 8” .75” 229391 3” 1.0” 229491 4” 1.0” 229591 5” 1.0” 229691 6” 1.0” 229791 7” 1.0” 229891 8” 1.0” Mitered probes available denoted by “M” after the part number, i.e. 224395M

Cable P/N 226020 is required for use with the ED-1100 Cable P/N 226021 is required for use with the ED-800 Cable P/N 226019 is required for use with the ED-810

Price: $260.00

Page 10: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

10

Manual Bolt Hole Probes Spartan Series

Medium Frequency 20 KHz - 500 KHz

Microdot Connector

Part No. Diameter Length Price 223012 3/16” 3” $ 155.00 223016 1/4" 3” $ 155.00 223020 5/16” 3” $ 155.00 223024 3/8” 3 ¼” $ 155.00 223028 7/16” 3 ¼” $ 155.00 223032 1/2” 3 ¼” $ 155.00 223036 9/16” 3 ½” $ 155.00 223040 5/8” 3 ½” $ 155.00 223044 11/16” 3 ½” $ 155.00 223048 3/4" 3 ½” $ 155.00 223052 13/16” 3 ½” $ 160.00 223056 7/8” 3 ½” $ 160.00 223060 15/16” 3 ½” $ 160.00 223064 1” 3 ½” $ 260.00 223068 1 1/16” 4” $ 260.00 223072 1 1/8” 4” $ 260.00 223076 1 3/16” 4” $ 260.00 223080 1 1/4" 4” $ 260.00 223084 1 5/16” 4” $ 260.00 223088 1 3/8” 4” $ 260.00 223092 1 7/16” 4” $ 260.00 223096 1 1/2" 4” $ 260.00 223100 1 9/16” 4” $ 260.00 223104 1 5/8” 4” $ 260.00 223108 1 11/16” 4” $ 260.00 223112 1 3/4" 4” $ 260.00 223116 1 13/16” 4” $ 260.00 223120 1 7/8” 4” $ 260.00 223124 1 15/16” 4” $ 260.00 223128 2” 4” $ 260.00

Add “S” to part numbers above for shielded probe i.e. 223012S

High Frequency 500 KHz - 6 MHz

Microdot Connector

Part No. Diameter Length Price 224012 3/16” 3” $ 155.00 224016 1/4" 3” $ 155.00 224020 5/16” 3” $ 155.00 224024 3/8” 3 ¼” $ 155.00 224028 7/16” 3 ¼” $ 155.00 224032 1/2” 3 ¼” $ 155.00 224036 9/16” 3 ½” $ 155.00 224040 5/8” 3 ½” $ 155.00 224044 11/16” 3 ½” $ 155.00 224048 3/4" 3 ½” $ 155.00 224052 13/16” 3 ½” $ 160.00 224056 7/8” 3 ½” $ 160.00 224060 15/16” 3 ½” $ 160.00 224064 1” 3 ½” $ 260.00 224068 1 1/16” 4” $ 260.00 224072 1 1/8” 4” $ 260.00 224076 1 3/16” 4” $ 260.00 224080 1 1/4" 4” $ 260.00 224084 1 5/16” 4” $ 260.00 224088 1 3/8” 4” $ 260.00 224092 1 7/16” 4” $ 260.00 224096 1 1/2" 4” $ 260.00 224100 1 9/16” 4” $ 260.00 224104 1 5/8” 4” $ 260.00 224108 1 11/16” 4” $ 260.00 224112 1 3/4" 4” $ 260.00 224116 1 13/16” 4” $ 260.00 224120 1 7/8” 4” $ 260.00 224124 1 15/16” 4” $ 260.00 224128 2” 4” $ 260.00

Add “S” to part numbers above for shielded probe i.e. 224012S

Cable P/N 210816 is required. Adapters may be required when using Spartan Series probes with impedance plane instruments. Custom size probes are available upon request.

Page 11: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

11

Manual Bolt Hole Probes

Titan Series

Ferrite Shielded Absolute Coil Triaxial LEMO Connector with integral balancing coil 20 KHz - 500 KHz

Part No. Diameter Length Price 226069 1/4" 3” $ 195.00 226071 5/16” 3” $ 195.00 226072 3/8” 3 ¼” $ 240.00 226073 7/16” 3 ¼” $ 240.00 226074 1/2” 3 ¼” $ 240.00 226075 9/16” 3 ½” $ 240.00 226076 5/8” 3 ½” $ 240.00 226077 11/16” 3 ½” $ 240.00 226078 3/4" 3 ½” $ 240.00 226079 13/16” 3 ½” $ 240.00 226080 7/8” 3 ½” $ 240.00 226081 15/16” 3 ½” $ 240.00 226082 1” 3 ½” $ 240.00 226083 1 1/16” 4” $ 255.00 226084 1 1/8” 4” $ 255.00 226085 1 3/16” 4” $ 255.00 226086 1 1/4" 4” $ 255.00 226087 1 5/16” 4” $ 255.00 226088 1 3/8” 4” $ 255.00 226089 1 7/16” 4” $ 255.00 226090 1 1/2" 4” $ 255.00 226091 1 9/16” 4” $ 255.00 226092 1 5/8” 4” $ 255.00 226093 1 11/16” 4” $ 255.00 226094 1 3/4" 4” $ 255.00 226095 1 13/16” 4” $ 255.00 226096 1 7/8” 4” $ 255.00 226097 1 15/16” 4” $ 255.00 226098 2” 4” $ 255.00

Gemini Series

Shielded Differential Coil Triaxial LEMO Connector 500 KHz - 6 MHz

Part No. Diameter Length Price 226041 5/16” 3” $ 230.00 226042 3/8” 3 ¼” $ 230.00 226043 7/16” 3 ¼” $ 230.00 226044 1/2” 3 ¼” $ 230.00 226045 9/16” 3 ½” $ 230.00 226046 5/8” 3 ½” $ 230.00 226047 11/16” 3 ½” $ 230.00 226048 3/4" 3 ½” $ 255.00 226049 13/16” 3 ½” $ 255.00 226050 7/8” 3 ½” $ 255.00 226051 15/16” 3 ½” $ 255.00 226052 1” 3 ½” $ 255.00 226053 1 1/16” 4” $ 265.00 226054 1 1/8” 4” $ 265.00 226055 1 3/16” 4” $ 265.00 226056 1 1/4" 4” $ 265.00 226057 1 5/16” 4” $ 265.00 226058 1 3/8” 4” $ 265.00 226059 1 7/16” 4” $ 265.00 226060 1 1/2" 4” $ 265.00 226061 1 9/16” 4” $ 265.00 226062 1 5/8” 4” $ 265.00 226063 1 11/16” 4” $ 265.00 226064 1 3/4" 4” $ 265.00 226065 1 13/16” 4” $ 265.00 226066 1 7/8” 4” $ 265.00 226067 1 15/16” 4” $ 265.00 226068 2” 4” $ 265.00

Cable P/N 226020 is required for use with the ED-1100 Cable P/N 226021 is required for use with the ED-800 Cable P/N 226019 is required for use with the ED-810 Custom size probes are available upon request.

Page 12: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

12

Automatic Bolt Hole Probes Mercotac Connector Medium Frequency 20 KHz - 500 KHz For use with Centurion HT-100, HS-50, and Gulton FD-100

Part No. Diameter Price 223912 3/16” $ 165.00 223914 7/32” $ 165.00 223916 1/4" $ 165.00 223918 9/32” $ 165.00 223920 5/16” $ 165.00 223922 11/32” $ 165.00 223924 3/8” $ 165.00 223926 13/32” $ 165.00 223928 7/16” $ 165.00 223930 15/32” $ 165.00 223932 1/2" $ 165.00 223934 17/32” $ 165.00 223936 9/16” $ 165.00 223938 19/32” $ 165.00 223940 5/8” $ 165.00 223944 11/16” $ 165.00 223946 23/32” $ 165.00 223948 3/4" $ 165.00 223950 25/32” $ 165.00 223952 13/16” $ 165.00 223954 27/32” $ 165.00 223956 7/8” $ 175.00 223958 29/32” $ 175.00 223960 15/16” $ 175.00 223964 1” $ 270.00 223968 1 1/16” $ 270.00 223972 1 1/8” $ 270.00 223976 1 3/16” $ 270.00 223980 1 1/4" $ 270.00 223984 1 5/16” $ 270.00 223988 1 3/8” $ 270.00 223992 1 7/16” $ 270.00 223996 1 1/2" $ 270.00

Add “S” to part numbers above for shielded probe i.e. 223912S Sizes not listed are available upon request.

Probe Cable, BNC to Mercotac. For use with probes on this page. 72” long

P/N 215443 …………………………………… $110.00

Page 13: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

13

Differential Wheel Bead Seat Probes

Dual Microdot (standard)

Available with tri-axial LEMO Connector**

Medium Frequency 170KHz – 300KHz

Aircraft Gear Wheel Mfgr Wheel Number(s) Probe P/N

Airbus

A-300 Main Goodrich 3-1409 10-1366/1365 209492 A-300 Main Bendix 2606801 209479 A-300 Nose Messier 286351-00 209669 A-319/320 Main Goodrich 3-1530 10-1580/1590 209874 A-320 Main Goodrich 3-1491 10-1456/1457 209874 A-320 Main Messier C2026160 229115 A-320 NEO Main Goodrich 3-1691 229122 A-320 Nose Goodrich 3-1407 10-1484/1483 229020 A-319/320/321 Nose Goodrich 3-1531/-1 10-1583/1584 229023 A-330/340 Main Goodrich 3-1509 10-1545,-1-2/1544,-1 229021 A-340-B Nose Goodrich 3-1596 10-10-1691/1692 229077 A-340G Main Goodrich 3-1546 10-1608,-1-2/1609 229101

Alenia

ATR-42 Main Goodrich 3-1518-2 10-1607 229024 ATR-42 Main ABSC 5006856 209808 ATR-42 Nose ABSC 5006858 209809 ATR-72 Main Dunlop PNAHA1752; PNAHA1890 209688 ATR-72 Nose Dunlop 209848

** For LEMO connector, add “L” to part number i.e. 229044L

Price: $490.00

Shown with LEMO Connector

Avro

748 Main Bendix 2600341-1 209561 748 Nose Bendix 2600342-1 209562

Page 14: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

14

Beech

90 Main Goodrich 3-1208-1 10-1064 229025 200 Main ABSC 5002460 229072 200 Main Goodrich 3-1209-2 229102 200/300 Main Goodrich 3-1341,-1 10-1266/1267,-1 229006 200/300 Nose Goodrich 3-1481 10-1540,-1/1505,-1 229007 1900 Nose Goodrich 3-1426 10-1412/1146 209875 1900 Main ABSC 5006028 209621 1900-D Main Cleveland CM40-273A 229057

Boeing

707 Main Goodrich 3-939 10-803/802 229000 707 Main Goodrich 3-991 10-852/802 229000 707 Main Goodrich 3-1104 10-852/802 229000 727 Main Goodrich 3-1081 10-950/951 229001 727 Main Goodrich 3-1069 10-943/944 209620 727 Main Goodrich 3-1306 10-1202/1201 209620 727 Main Goodrich 3-1414 10-1376/1377 209620 727 Main Goodrich 3-1215 10-1109/1108 229001 727 Main Goodrich 3-1214 10-1107/1106 209620 727 Nose Goodrich 3-1070 10-939/940 209551 727 Nose Goodrich 3-1395 10-939/940 209551 737 Main Goodrich 3-1398 10-1357/1356 209612 737 Main Goodrich 3-1439 10-1421/1422 209612 737-1/2 Main Bendix 2610571-1 209503 737-2/3/4/5 Nose Goodrich 3-1438 10-1419/1420 209750 737-1/2 Main Bendix 2601045 209500 737-2/3/4/5 Main Bendix 2606671-2 209556 737-3 Nose Bendix 2607825 209557 737-4-HGW Main Goodrich 3-1484 10-1510/1509 229002 737-7 Main Goodrich 3-1557 10-1625/1624 209903 737-8 Main Goodrich 3-1558 10-1626/1627 209903 737-7/8 Nose Goodrich 3-1559 10-1630/1631 209904 737-8 Main Goodrich 3-1674 10-1838/1859 229113 747-1 Main Bendix 2601901-6 209504 747-2 Main Bendix 2603561-E164 209571 747-4 Main Goodrich 3-1479 10-1502/1503 209782 747-8 Main Goodrich 3-1664 10-1822 229112 757 Main Goodrich 3-1427 10-1392/1391 209458 757 Main Goodrich 3-1428 10-1405/1391-1 209458 757 Main Goodrich 3-1422 10-1392/1391 209458 757 Nose Goodrich 3-1423-2 10-1393 223218 757 Nose Goodrich 3-1423 10-1393 223217 757-C Main Goodrich 3-1471 10-1475/1476 209673 777 Main Goodrich 3-1533 10-1592/1591,-1 209863 777 Main Goodrich 3-1540 10-1614/1615 209863 777 Nose Goodrich 3-1535 10-1589 229022 787 Main Goodrich 3-1645 229117 787 Nose Goodrich 3-1648 229116

Aircraft Gear Wheel Mfgr Wheel Number(s) Probe P/N

Page 15: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

15

Bombardier Lear 35 Main ABSC 9543991 209751 Lear 35 Nose ABSC 9544207 209752 Lear 35A Nose ABSC 95442075 209028 Lear 45 Main Goodrich 3-1545-1 10-1599/11-125 229050 Lear 45 Nose 229056 Lear 55 Main 229068

Lear 60 Main ABSC 5011738 229074 Lear 60 Nose ABSC 9536599 229075

Cessna 441 Main Goodrich 3-1372-1 10-1391-1/1284-1 229078 500/550 Main Goodrich 3-1490-1 10-1519-1/1520-1 229033 510 Main Goodrich 3-160 229097 510 Nose Goodrich 3-1642 229098 525 Main Goodrich 3-1527-1,-2 10-1569-1/1570,-2 229034 525-CJ2 Main Goodrich 3-1601-1,-2 10-1700/11-129 229096 550 Bravo Main Goodrich 3-1562 10-1635/1634 229035 650 Main Goodrich 3-1399-3 10-1358-2,-4/ 229036 thru -6 1359-1,-3 500/650 Nose Goodrich 3-1418 10-1384/1385 229037 500/525/650 Nose Goodrich 3-1403 10-1361/1362 229037 680 Main Goodrich 3-1621(1) 10-1735/11-124 229099 560-XL Main Goodrich 3-1571-4 10-1640-1/11-126 229038 Encore Main Goodrich 3-1607,-1 10-1711/11-128 229100 Citation-X Main Goodrich 3-1537 10-1585/11-124 209910 Citation-X Main Goodrich 3-1537-1 10-1585/11-124 209910 Citation Main ABSC 5001477-1 209520 Citation 750 Nose Goodrich 3-1538-1 10-1586-1 229039 Caravan Main 40-179 229083 Caravan Nose 40-177A 229082

Aircraft Gear Wheel Mfgr Wheel Number(s) Probe P/N

Canadair CL-600 Main ABSC 5004506-4 209615 CL-600 Nose ABSC 5006450 209481 BD-100 Main Goodrich 3-1609-1 229051 BD-100 Nose Goodrich 3-1610 229052 BD-700 Main Goodrich 3-1563-1 10-1642/1643 229030 BD-700 Main Goodrich 3-1599 10-1695/1694 229031 BD-700 Nose Goodrich 3-1560 10-1629/1628 229032 CRJ Main ABSC 5010571-1 229053 CRJ Nose ABSC 229054 CRJ 200 Main ABSC 5013750-1 229080 CRJ 700 Nose ABSC 5013750-1 229079 CRJ 900 Main ABSC 9001320-1 229091

Convair

CV-580 Main ABSC 9540512 209566

Page 16: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

16

Dassault

Falcon 10 Main ABSC 5000400 209888 Falcon 10 Nose ABSC 5000404 209887 Falcon 20 Main ABSC 9543809 209888 Falcon 20 Main ABSC 5003279-3 209870 Falcon 20 Nose ABSC 9543426 209872 Falcon 50 Main ABSC 209640 Falcon 50 Nose ABSC 9550296 209639 Falcon 900 Main ABSC 500450-4 209871 Falcon 900 Nose Messier 20182000 209873 Falcon 2000 Main A34807-1 229070 Falcon 2000 Nose A34977-1 229071

DeHavilland

DHC-6 Nose Goodrich 3-1197 10-1069/1070 229069 DHC-7 Main Goodrich 3-1354 10-1289/1290 229009 DHC-7 Nose Goodrich 3-1368 10-1313/1314 229010 DHC-7-150 Main Goodrich 3-1469 10-1480/1481 229011 DHC-8 Main Goodrich 3-1435 10/1418-2/1417-1 209622 DHC-8 Main Goodrich 3-1435-3 10-1418-2/1417-1 209908 DHC-8-1/2 Main Goodrich 3-1435-4 10-1418-3/1417-2 209909 DHC-8-1/202 Nose Goodrich 3-1442 10-1436/1435 209623 DHC-8-1-3 Nose Goodrich 3-1448 10-1448/1447 209906 DHC-8-3 Main Goodrich 3-1480-1 10-1506/1507 229086 DHC-8-3 Main Goodrich 3-1480-2 10-1506-1/1507-3 209907 DHC-8-4 Main Goodrich 3-1575 10-1655/1654 229040 DHC-8-4 Nose Goodrich 3-1574 10-1649,-1/1648,-1 229088 DHC-8-4 Main Goodrich 3-1573 10-1653/1652 229041

Aircraft Gear Wheel Mfgr Wheel Number(s) Probe P/N

Embraer

110 Main Goodrich 3-1436 10-1406/1407 209790 120 Main Goodrich 3-1446-1 10-1402-1/1403-1 209784 120 Main Goodrich 3-1446 10-1402/1403 209633 120 Nose Goodrich 3-1444 10-1401/1430 209791 120-C Main Goodrich 3-1458 10-1458/1459 209633 120-ER Main Goodrich 3-1544 10-1600/1601 209784 AM-X Main Goodrich 3-1477 10-497/11-120 229012 CBA-123 Main Goodrich 3-1497 10-1522/1521 229013 CBA-123 Nose Goodrich 3-1498 10-1527/1528 229014 145-ER Main Goodrich 3-1550 10-1604/1603 209885 145-ER Nose Goodrich 3-1551 10-1621/1620 209886 145-ER Main Goodrich 3-1631-1 10-1771/1603-2 229109 145-ER Nose Goodrich 3-1622 10-1744/1743 229108 145-LR Main Goodrich 3-1590 10-1682,-1/1684,-1 229042 145-LR Main Goodrich 3-1641 10-1787/1684-3 229110 190 90002319 229114

Page 17: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

17

Merlin/Metro Main Goodrich 3-1357 10-1296-1/1267-1 209771 Merlin/Metro Main Goodrich 3-1371 10-1296-1/1318 209771 Merlin/Metro Nose Goodrich 3-1418 10-1384/1385 209772 Merlin/Metro Nose Goodrich 3-1403 10-1361/1362 209772 A-10 Nose Goodrich 3-1358 10-1297/1298 209519 Metro III Main ABSC 500739 229047

Fairchild

Fokker

F-28 Main Bendix 2610145-2A 209428

Gulfstream

G-1 Main ABSC 9542306 209753 G-27 Main ABSC 9561061-7 209634 Main ABSC 9561061-9 229026 Nose ABSC 9543367 229027 G-V Main Dunlop 1159 229046 G-V Nose Dunlop AH55055 229048

Israeli

1121 Main Goodrich 3-1313,-1 10-1211,-2/1212,-1 229016 1123 Main Goodrich 3-1345 10-1271,-1/1272 229017

Aircraft Gear Wheel Mfgr Wheel Number(s) Probe P/N

General Dynamics

F-16 Nose Goodrich 3-1505 229015 F-16LW Main Goodrich 9561061-7 209634

Grumman

S2 Main Bendix 152725-1 229049 Global Hawk Main Goodrich 3-1545-1 229092 Global Hawk Main Goodrich 3-1506 229093 Global Hawk Nose Jay-EM 229094

Lockheed

C-5 Main Goodrich 3-1268 10-1144/1143 229004 C-5 Nose Goodrich 3-1258 10-1134/1135 229005 C-141 Main ABSC 5000169 209773 L-1011 Main Goodrich 3-1375 10-1347/1346 209466 L-1011 Main Goodrich 3-1365 10-1324/1323 209466 L-1011 Nose Goodrich 3-1319 10-1220/1221 209533 L-1011 Nose Goodrich 3-1349 10-1283/82/88 209533 L-188 Main Goodrich 3-919 10-781/782 209508 L-188 Main Goodrich 3-1085 10-954/955 209508 P-3 Main Goodrich 3-1267 10-1105/1104 229119 P-3 Nose Goodrich 3-1284 10-1170/1169 229121

U-2 Nose Goodrich 3-1289 10-1175/1051 229103

Page 18: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

18

McDonnell Douglas

F-4 Main ABSC 5000504 209422 DC-8-63 Main Bendix 2601411 209507 DC-8 Nose ABSC 9550328 209552 DC-9 Nose ABSC 9550267 209570 DC-9-31 Nose ABSC 9550107 209510 DC-9-31 Main ABSC 9526859-1 209493 DC-9-51 Main ABSC 9560892 209494 DC-10 Main ABSC 500757-5 209505 DC-10 Nose ABSC 500919-1 209555 DC-10-10 Main ABSC 500030 209778 MD-11 Main Bendix 2609471 209840 MD-80 Main ABSC 5004320-3 209554 MD-80 Main Bendix 5268901 209521 T-45 Main Goodrich 3-1473 229059 T-45 Nose Goodrich 3-1474 229060

Piaggio

P-180 Nose Goodrich 3-1460 229132 P-180 Main Goodrich 3-1461,-1 10-1465/1464 209779

Aircraft Gear Wheel Mfgr Wheel Number(s) Probe P/N

Pilatus

PC-9 Main Goodrich 3-1450 10-1440/1439 209868 PC-9 Nose Goodrich 3-1465 10-1468/1469 229018 PC-12 Main Goodrich 3-1543 10-1598/1597 229043 PC-12 Nose Goodrich 3-1501 10-1442/1536 229045 PC-12 Main Parker 40-424 229107

Raytheon

HS-125 Main Goodrich 3-1508 10-1546/1547 229008 Hawker Main Dunlop AHA1814 209914 Hawker Nose Dunlop AHA52339 209913 J-31 Main Goodrich 3-1485 10-1513/1514 209794 J-31/32 Main Goodrich 3-1485 10-1513-1/1514-1 229029 King Air Nose Goodrich 3-1481 10-1504,-1/1505,-1 223219 T-6A Main Goodrich 3-1548 10-1658/1659 209894 T-6A Nose Goodrich 3-1465 10-1468/1469,1 209869 111 Main Bendix 2600344 209559 111 Nose Bendix 2600373 209560 400A Main 400-8002-201 209915 400A Nose 5010693 209916 Premier 1 Main Goodrich 3-1576 10-1656,-1/1657,-1 229084 Premier 1 Nose Goodrich 3-1586 10-1681/1682 229085

Rockwell

Orbiter Main Goodrich 3-1482 10-1508/1387 209754

Page 19: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

19

Sikorsky

CH-46 Main ABSC 9514825 209467 CH-53A Main Goodrich 3-1179 10-1041/1040 229019

Westland

EH-101 Nose Goodrich 3-1495 10-1531 229044

Aircraft Gear Wheel Mfgr Wheel Number(s) Probe P/N

Page 20: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

20

Encircling Coil - Absolute

Operating Frequency 20 KHz - 500 KHz 2 Pin Female Microphone Connector

Part No. Diameter Price 203695 1/8” $ 465.00 058254 3/8” $ 465.00 207849 5/8” $ 465.00 207850 7/8” $ 465.00 058252 1” $ 500.00 200637 1-1/4” $ 500.00 209073 1-1/2” $ 500.00 203555 1-11/16” $ 500.00 200849 2-1/16” $ 515.00 209061 3-1/16” $ 515.00

Cable P/N 063947 is required for these coils. Adapters may be required when using these coils with some instruments. Also, two coils or one coil and a balance coil (P/N 209730) are required for use with an impedance plane instruments. However, for optimum sorting sensitivity, it is recommended that two coils are used; one as the sensor and one as the reference. Sizes not shown are available upon request.

Operating Frequency 100Hz - 300Hz 2 Pin Female Microphone Connector

Part No. Diameter Price 210764 .265” $ 525.00 206064 .500” $ 525.00 200439 1” $ 525.00 200440 2” $ 525.00

Cable P/N 063947 is required for these coils. Adapters may be required when using these coils with some instruments. Also, two coils or one coil and a balance coil (P/N 209730) are required for use with impedance plane instruments. However, for optimum sorting sensitivity, it is recommended that two coils are used; one as the sensor and one as the reference. Sizes not shown are available upon request.

Encircling Coil Cable, BNC to 2-pin Microphone. For use with encircling coils on this page. 10’ long

P/N 063947 …………………………………… $155.00

Page 21: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

21

Surface Probes

General Purpose Probe .215” unshielded coil diameter; 2-1/8” long overall 10 KHZ—500 KHz. Used for crack detection in non-ferrous materials. Probe comes standard with ED-510XL and ED-520Me instruments. Microdot con-nector; cable P/N 210816 required.

P/N 222296S ………………………………….$ 75.00

Miniprobe 5/16” dia. X 1-1/8” long 10 KHz - 500 KHz. General pur-pose unshielded probe for flaw detec-tion or alloy sorting of non-ferrous material. Ferrite core. 72” long cable attached terminated with BNC connector.

P/N 207067 ………………………………….. $ 165.00

Cup Core Probe 2” long probe body. 1 KHz—10 KHz for hardness and alloy sorting. Available in 9mm and 14 mm di-ameter. 72” long cable attached terminated with BNC connector.

P/N 213263 9mm diameter ………………. $ 300.00 P/N 213217 14mm diameter ……………… $ 300.00

Cross-Coil Pencil Probe 4” long cranked with .5” drop. 100 KHz used for crack detection in ferrous material. 72” cable attached terminated with dual BNC

connectors. P/N 220316 ………………………………….. $ 275.00 Note: Can be terminated with other connectors to mate with impedance plane instruments.

Corrosion Probe 3/8” diameter, 1” long. 5 KHz with microdot connector

P/N 209824 ………………………………….. $ 205.00

Flat Cross-Coil Probe .430” dia. X 3” long; 100 KHz for crack detection in ferrous material. 72” long cable attached; for use with ED-400 or ED-400M P/N 220304 …………………………………. $ 310.00 Note: Can be terminated with other connectors to mate with impedance plane instruments.

5/16” dia. X 3.5” long absolute coil probe with internal balance coil. Spring loaded with clear acrylic guide. 10 KHz-500 KHz for flaw detection in non-ferrous mate-rials. 72” dual BNC cable attached. P/N 225538 …………………………………. $ 210.00 Note: Can be terminated with other connectors to mate with impedance plane instruments.

Right Angle Reflection Probe Corrosion detection in aluminum. 1 KHz –10 KHz. 72” long cable with ED-810 6 pin MS connector. P/N 209807 …………………………………. $ 465.00 Note: Can be terminated with other connectors to mate with impedance plane instruments.

Page 22: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

22

Surface Probes

Flat Cross-Coil Probe .430” dia. X 3” long; 100 KHz for crack detection in ferrous material. 72” long cable attached; for use with ED-400 or ED-400M

P/N 209807 …………………………………. $ 465.00 Note: Can be terminated with other connectors to mate with impedance plane instruments.

Wedge or Chisel Point Cross-Coil Probe 3/8” dia. X 1.80” long 100 KHz for crack detection in ferrous materials. 72” long cable for ED-400.

P/N 209400 …………………………………. $ 275.00 Note: Can be terminated with other connectors to mate with impedance plane instruments.

Spherical Cross-Coil Probe w/ Alarm LED 100 KHz for crack de-tection in ferrous mate-rials. 72” long cable. This is the standard ED-400M probe

P/N 220066 …………………………...…….$ 245.00

Flat Cross-Coil Probe w/ Alarm LED 100 KHz for crack detection in ferrous materials. 72” long cable. For use with the ED-400M

P/N 220049 ………………………………….. $ 275.00

Spherical Cross-Coil Probe 3/8” dia. X 1.8” long. 100 KHz for crack detection in ferrous materials. 72” long cable for use with ED-400.

P/N 220085 ………………………………….. $ 275.00 Note: Can be terminated with other connectors to mate with Impedance plane instruments.

Flat Cross-Coil Probe 3/8” dia. X 1.8” long. 100 KHz for crack de-tection in ferrous materi-als. 72” long cable for use with ED-400.

P/N 220072 ………………………………….. $ 250.00 Note: Can be terminated with other connectors to mate with impedance plane instruments.

Flat, Long Reach Cross-Coil Probe .380” dia. X .30” thick x 6.4” long; 100 KHz for crack detection in fer-rous material. 72” long cable attached; for use

with ED-400. P/N 220082 …………………………………. $ 285.00 Note: Can be terminated with other connectors to mate with impedance plane instruments.

Mini-Swivel Cross-Coil Probe .210” dia. coil X 9” long; 100 KHz for crack detection in ferrous material. Cross-coil cable required, P/N 220083

P/N 220079 …………………………………. $ 395.00

Page 23: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

23

Spherical Probes

Good for concave surfaces Used to detect cracks in nonferrous material 20 KHz - 500 KHz 72” long cable with BNC connector

Crack detection around fastener holes Low Frequency 72” long cable with BNC connectors

SPHERICAL PROBES

Part No. Length Diameter Price

207060 2” 1/2” $ 225.00

207061 2” 7/16” $ 225.00

207062 2” 3/8” $ 225.00

207063 2” 5/16” $ 225.00

207064 2” 1/4” $ 225.00

207065 2” 3/16” $ 225.00

Ring Probes

Ring Bridge

Part No. Frequency ID OD Price

225425 100 Hz - 1 KHz .33” 1” $ 450.00

225420 100 Hz - 1 KHz .5” 1” $ 450.00

225415 100 Hz - 1 KHz .56” 1.15” $ 450.00

225410 100 Hz - 1 KHz .8” 1.4” $ 450.00

225435 500 Hz - 5 KHz .30” .75” $ 450.00

Page 24: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

24

Crack detection in counter sink surface Shielded Coil 20 KHz — 500 KHz Microdot connector

Counter Sink Probes

100° Counter Sink

Part No. Pilot Hole Size Length Price

223850 5/32” 2.5” 155.00

223851 3/16” 2.5” 155.00

223852 7/32” 2.5” 155.00

223853 1/4” 2.5” 155.00

Wheel Fuse Plug Probes

Boeing 737-8 Main Wheel Goodrich Wheel #3-1674 Crack detection in counter sink surface Shielded Coils - Bridge/Differential 20 KHz — 500 KHz Triaxial LEMO connector

P/N 223195 ……………………………………… $ 515.00

Page 25: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

25

Adapters

ED-1100 to Dual BNC , adapter enables the use of probes with BNC connect-ors. P/N 225386 …… $ 300.00

ED-810 to Dual BNC, adapter enables the use of probes with BNC connectors. P/N 209534 …. $ 155.00

Probe Starter Kits

Absolute Probe Kit This probe kit includes: (1) P/N 223400 Pencil Probe, (1) P/N 222296S Surface Probe, (1) P/N 223695 Pencil Probe, (1) P/N 210816 Probe Cable, and (1) P/N 207066 Aluminum 3 Slot Test Block P/N 219586 ………………… $ 385.00

General Purpose Probe Kit This probe kit includes: (2) P/N 213263 Low Frequen-cy Probe (2) P/N 207067 Surface Probe (2) P/N 223400 Pencil Probe (2) P/N 224400 High Freq. Pencil Probe (2) P/N 210816 Probe Cable (1) P/N 225389 Multi-Functional Test Block

P/N 213208 ………………. $ 1690.00

ED-1100 Starter Probe Kit This probe kit includes: (2) P/N 213263 Low Frequen-cy Probe (2) P/N 207067 Surface Probe (1) P/N 226030 Titan Series Pencil Probe (1) P/N 226020 Probe Cable (1) P/N 225389 Multi-Functional Test Block

P/N 225383 ……………….. $ 1565.00

Balance Load For use on ED-1100, ED-800 or ED-810 when testing with absolute coil probes. Available in medium or high frequency. P/N 209730 20KHz—500KHz ……... $ 100.00 P/N 209735 500KHz—6MHz …….…… $ 110.00

Page 26: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

26

Probe Cables

ED-1100 to Triaxial LEMO Used for Titan and Gemini Series probes. 72” long

P/N 226020 …………………………………… $195.00

ED-1100 to Dual Microdot Commonly used with wheel bead seat probes 72” long. Available for differential bridge or reflection inputs.

P/N 225364 Differential Bridge …………… $ 195.00 P/N 225388 Reflection ……………………… $ 195.00

ED-400/ED-400M probe cable, 60” long

P/N 220083 ……………………………………..$ 110.00

ED-810 to Dual Microdot Commonly used with wheel bead seat probes. 72” long. Available for differential bridge or reflection inputs.

P/N 209703 Differential Bridge …………… $ 110.00 P/N 209925 Reflection ………………………$ 110.00

ED-810 to Triaxial LEMO Used for Titan and Gemini Series probes. 72” long Available for differential bridge or reflection inputs.

P/N 226019 Differential Bridge …………… $ 195.00 P/N 226039 Reflection ……………………… $ 195.00

BNC to Microdot 72” long, for use with most absolute coil probes.

P/N 210816 ………………………………….. $ 58.00 P/N 221348 Dual BNC to Microdot ……. $ 110.00

Instrument Connector Style Part Number Price ED-800 (4-Pin) Triaxial LEMO Reflection 209918 220.00 ED-800 (4-Pin) Triaxial LEMO Diff. Bridge 223183 185.00 ED-800 (Dual BNC) Triaxial LEMO Diff. Bridge 226021 135.00 ED-800 (4-Pin) dual Microdot Reflection 209859 95.00 ED-800 (4-Pin) dual Microdot Diff. Bridge 209864 95.00 MIZ 10 dual Microdot Diff. Bridge 218770 225.00 MIZ 10/20 Triaxial LEMO Diff. Bridge 226018 160.00 MIZ 21B dual Microdot Diff. Bridge 209923 200.00 NDT 19IIe dual Microdot Diff. Bridge 209924 220.00 NDT 19IIe Triaxial LEMO Diff. Bridge 209922 230.00 Nortec 500/2000 Triaxial LEMO Diff. Bridge 209921 295.00 Nortec 500/2000 dual Microdot Diff. Bridge 209917 225.00 Other cables available upon request

Customized Probe Cables

Page 27: Centurion NDT · ized Eddy Current Testing. These probes will operate with the ED-1100 or ED-810, as well as most general purpose eddy current instruments at frequencies for 500 KHz

27

Test Blocks

3 Slot Test Block Verify probe and test instrument functionality. Slots are .008”, .020”, and .040” deep by .005” wide. Overall size: 3.125” x 1.375”. P/N 207066 2024-T4 Aluminum Alloy …….. $ 125.00 P/N 221187 7075-T6 Aluminum Alloy …….. $ 125.00 P/N 207066S 4340 Steel Alloy …………….. $ 185.00 P/N 207066SS 304 Stainless Steel ……….. $ 235.00 P/N 220004 1018 Steel Alloy ………………. $ 150.00

Contact factory for custom reference test standards.

1 Slot Test Block Verify probe and test instrument functionali-ty. The slot is .015” deep by .005” wide. Overall size: 2.50” x 1.25”. P/N 205156 2024-T4 Aluminum Alloy …….. $ 115.00 P/N 221186 7075-T6 Aluminum Alloy …….. $ 115.00 P/N 221617 4340 Steel Alloy ………………. $ 115.00 P/N 211623 304 Stainless Steel …………… $ 215.00 P/N 221098 2 Slots, .005” & .010” deep ….. $ 135.00 2024-T4 Aluminum Alloy

Corrosion Test Plate Verify function of low frequency corrosion probes. .100” thick with simulated 5%, 10% and 20% materi-al loss. Overall size: 7.50” x 3.50”. P/N 213444 2024-T4 Aluminum Alloy …….. $ 235.00 P/N 221804 7075-T6 Aluminum Alloy …….. $ 235.00

Multi-Functional Test Block 4 step test block to demonstrate cracks in different materials and corrosion. Slots are .010” & .020” deep in 6063 and 2024 aluminum and 4130 steel. Corro-sion shows 10% and 30% material loss in 2024 alumi-num. Overall size: 4.25” x 2.00”. P/N 225389 …………………………...…….. $ 520.00