cemline replacement tube · pdf filecemline replacement tube bundles ... (fixed tubesheet or...
TRANSCRIPT
Cemline Replacement Tube Bundles
P.O. BOX 55 CHESWICK, PENNSYLVANIA 15024Phone: (724) 274-5430 FAX: (724) 274-5448
www.cemline.com
Tube Bundle Options 4” to 30” Nominal Diameter U-Tube, or Straight Tube (Fixed Tubesheet or Floating Tubesheet)
Heat Exchanger Tube Bundles Tank Heater Tube Bundles Double Wall Vented Tube Bundles Standard & Specialty Alloys Heads & Bonnets Tank Collars & Nozzles A.S.M.E. Stamping Available
Tubing Alloy List Copper Carbon Steel Admirality Brass 90:10 Copper Nickel 304-L Stainless Steel 316-L Stainless Steel
Double Wall Material List Copper inner/Copper outer Copper inner/90:10 Cu-Ni outer 90:10 Cu-Ni inner/90:10 Cu-Ni outer
(Other tubing alloys and materials are available upon request)
We can cross reference other manufactures make
and model numbers: Adamson American Standard A. O. Smith
Armstrong Bell & Gossett ITT Standard Old Dominion Patterson-Kelley Reco Taco Thrush Yula
Standard delivery time 1 week. Can provide quick ship upon request.
MANUFACTURE DIRECT REPLACEMENTS
Dimensional Sheet
Please fill in informationthat is known.
Spacer/Baffle Options
R
BOLT CIRCLE
O.D.
P
Size of Bolts
BOLT CIRCLE
Half Baffle
Spacer
Baffle or Spacer Spacing
Number of Baffles or Spacers
oTank Replacement, Submerged Heater
oHeat Exchanger Replacement, Forced Hot Water Heater
Tube SheetoSteeloCopper LinedoOther
WalloSingle WalloDouble Wall
O.D. of Tubes
Number of Tubes
Material of TubesNumber of Passeso2 Passeso4 Passes
Often it is impossible to measure all dimensions while the unit is in service. We can manufacture a coil to fit when provided with the minimum of 4 dimensions.
Required information:
1. P - center to center of bolt holes.
2. Number of bolts.
3. R - O.D. of neck or circumference of neck.
4. Length of unit. If unknown, measure the length of vessel or maximum length available to remove bundle.Optional information:
1. O.D. 3. Size of bolts
2. Bolt circle
oFull Face Tube Sheet
oFull Face Tube Sheet (Drilled and Tapped)
oBetween the Bolt Tube Sheet
Tube Sheet Options
®
STONESTEEL is a Registered Trademark of Cemline Corporation
©2016 Cemline Corporation All Rights Reserved.
All trademarks on this brochure are the property of Cemline Corporation, unless otherwise noted or in any other way set forth as a third party rights. Unauthorized use of these trademarks, as well as the materials presented on this site, is expressly prohibited and constitutes a violation of the intellectual property rights of Cemline Corporation.
CEMLINE CORPORATIONP.O. BOX 55 CHESWICK, PENNSYLVANIA 15024Phone: (724) 274-5430 FAX: (724) 274-5448
www.cemline.com