C-9895

FADISEL S.L.

Registered names and trademarks that arecited are the property of their respective owners

Robot Arm controlled by cable kit.

Manual for Assembly and Use

Page: 01/36

C-9895 Rev. 0836

Contents

Robot Arm:

1. Introduction

2. Required Tools

3. List of Components

4. Plastic Parts

5. Mechanical Assembly

P.3

P.3

P.4

P.5

P.7

Wire Control Unit:

1. Introduction

2. Required Tools

3. List of Components

4. Plastic Parts

5. Mechanical Assembly

P.29

P.29

P.29

P.30

P.30

How It Works

Potential Problems

Schematics

Warnings and Recommendations

Considerations / Warranty

ATTENTION:

P.33

P.35

P.35

P.36

P.36

Not for children under 3 years, contains small parts that can be swallowed.

Suitable for over 10 years, under the supervision of an adult.

Page: 02/36

C-9895 Rev. 0836

ROBOT ARM

1

Introduction:

Learn basic robotics technology,build your own robot arm with fivemotors and five joints.The control unit is equipped with five cable

levers that control the rotation of thebase, the movement of the elbow and the wrist,and function the gripper of the robot arm. The5 motors operate clamping, grasping,releasing, lifting, lowering and turning.A search light increases fun when it

works in the dark.

W

Maximum load it can carry: 100g

H

Dimensions: 2286 (L) x 160 (W) x 381 (H) mm

Weight: 658 g

L

Batteries required:

4 x battery type D (not included)

2

Tools Required:

Needle Nose Pliers

Cutter

Screwdriver

Battery D (4 units)

Page: 03/36

C-9895 Rev. 0836