c:\documents and settings\roberto\desktop\suono telecom

1
via Mazzini, 19 25020 FLERO (BS) ITALY tel. +39-30-2761599 fax. +39-30-2762099 www.suono.com e-mail: [email protected] ITALY SUONO telecom FM Broadcast Power Amplifier mod. ASM10K Frequency range: Type of transistors: Output RF connector: Input RF connector: IN/Output Impedance: Harmonich suppression: Power gain: Residual asyncron AM: Threshold of ROS by software: Threshold of ROS fast hardware: General stability of the output power: Efficiency: Permissible voltage variation: Operating temperature range: Permissible relative humidity: Maximum installation height: AC supply voltage: Power ratio: Delta temperature: Redundance power supply: Redundance cooling: 87.5 - 108 MHz St Microelettronics SD2942 1 5/8”EIA NF 50 ohm > 72 dB > 18dB < 0,10% 11 % 11 % +/-0,1 dB 65% typ. 15% 0° to +45 °C 95% @ +35°C 3000m above mean sea level 380 V or 400 V 3 phases + neutral wire >0,9 < 15°C yes yes More than 50 parameters shown on LCD display Setting all parameters from the frontal panel via rotary knob encoder and LCD display 3 3 > > > > > > > > Equipped with the latest MOSFET RF technology, the ASM10K FM power amplifier features excellent efficiency and compact design. Four ASM2K-H Amplifiers are combined in a compact and clear modular design. High efficiency of at least 64% independent of output power level. Each RF amplifier has its own power supply, guard circuits and integrated harmonic filter.. Each amplifier module is, therefore, selfmonitoring and self-protective Reduced stock of spares and high standardization level through the use of identical modules Easy monitoring and intelligent fault detection system as well as remote control via BITBUS or modem High reliability and optimum price/performance ratio are distinguishing features of the ASM10K Key Features Specifications SUONO TELECOM S.r.l.

Upload: vuongliem

Post on 11-Jan-2017

236 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: C:\Documents and Settings\ROBERTO\Desktop\SUONO TELECOM

via Mazzini, 19 25020 FLERO (BS) ITALY tel. +39-30-2761599 fax. +39-30-2762099www.suono.com e-mail: [email protected]

ITALY

SUONO

telecom

FM Broadcast Power Amplifier mod. ASM10K

Frequency range:Type of transistors:Output RF connector:Input RF connector:IN/Output Impedance:Harmonich suppression:Power gain:Residual asyncron AM:Threshold of ROS by software:Threshold of ROS fast hardware:General stability of the output power:Efficiency:Permissible voltage variation:Operating temperature range:Permissible relative humidity:Maximum installation height:AC supply voltage:Power ratio:Delta temperature:Redundance power supply:Redundance cooling:

87.5 - 108 MHzSt Microelettronics SD2942

1 5/8”EIANF

50 ohm> 72 dB

> 18dB< 0,10%

11 %11 %

+/-0,1 dB65% typ.

15%0° to +45 °C95% @ +35°C

3000m above mean sea level380 V or 400 V 3 phases + neutral wire

>0,9< 15°C

yesyes

More than 50 parameters shown on LCD displaySetting all parameters from the frontal panel via rotary

knob encoder and LCD display

3

3

>

>>>>>>>

Equipped with the latest MOSFET RF technology, the ASM10K FM power amplifierfeatures excellent efficiency and compact design.Four ASM2K-H Amplifiers are combined in a compact and clear modular design.High efficiency of at least 64% independent of output power level.Each RF amplifier has its own power supply, guard circuits and integrated harmonic filter..Each amplifier module is, therefore, selfmonitoring and self-protectiveReduced stock of spares and high standardization level through the use of identical modulesEasy monitoring and intelligent fault detection system as well as remote control via BITBUS or modemHigh reliability and optimum price/performance ratio are distinguishing features of the ASM10K

Key Features

Specifications

SUONO TELECOM S.r.l.