ccna d1 - final

Author: ciccio67346

Post on 05-Apr-2018

226 views

Category:

Documents


0 download

Embed Size (px)

TRANSCRIPT

  • 8/2/2019 Ccna d1 - Final

    1/16

    Below you will find the assessment items as presented on the exam as well as the scoring rules associated with the item.

    Cisco Networking Academy content is copyrighted and the unauthorized posting, distribution or sharing of this exam content isprohibited.

    Close Window

    Assessment System

    Exam Viewer - DHomesb Final Exam - CCNA Discovery: Networking for Home and Small Businesses (Version4.0)

    1 What is specified by the network number in an IP address?the network to which the host belongs

    the physical identity of the computer on the network

    the node of the subnetwork which is being addressed

    the broadcast identity of subnetwork

    Observable Description Max Value

    1 correctness of response 2 points for Option 10 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    5.1.3 Parts of an IP Address2 What measurement is commonly used to describe communication speed when transferring data?

    bps

    cps

    Hz

    MB

    Observable Description Max Value

    1 correctness of response 2 points for Option 10 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    1.3.3 Measuring Speed, Resolution and Frequency3

    Refer to the graphic. Assume that the command output is from a wireless DHCP client that is connected to a Linksys integrated router.What can be deduced from the output?

    The wireless connection is good.

    The WEP key or SSID needs to be checked.

    Page 1 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    2/16

    The DHCP configuration on the router needs to be checked.

    The wireless NIC driver or the NIC itself needs to be reinstalled.

    Observable Description Max Value

    1 correctness of response 2 points for Option 10 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    9.2.2 Software Utilities for Troubleshooting Connectivity9.2.4 Troubleshooting Using Ping

    4 A wireless DHCP client cannot connect to the Internet through a Linksys integrated router. When you type ipconfig on the host, no IPaddress, subnet mask, or default gateway shows. What are two of the first things you will check? (Choose two.)

    SSID

    if the wireless client is configured for DHCP

    the cable between client and integrated router

    the firewall configuration on the integrated router

    if the correct default gateway is configured on the client

    if the correct default gateway is configured on the integrated router

    Observable Description Max Value

    1 correctness of responseOption 1 and Option 2 are correct.1 point for each correct option.0 points if more options are selected than required.

    2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    9.2.3 Troubleshooting Using Ipconfig5 What are two advantages of purchasing a custom-built computer? (Choose two.)

    usually a lower cost

    no waiting period for assembly

    user can specify higher performance components

    supports higher-end graphics and gaming applications

    fewer components to replace

    Observable Description Max Value

    1 correctness of responseOption 3 and Option 4 are correct.1 point for each correct option.0 points if more options are selected than required.

    2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    1.4.1 Computer System6 What is the function of the DNS server?

    It assigns IP addresses to clients.

    It accepts HTTP requests from clients.

    It maps a hostname to a corresponding IP address.

    It manages the domain that clients are assigned to.

    Observable Description Max Value

    1 correctness of response 2 points for Option 30 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    Page 2 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    3/16

    6.2.1 Domain Name Service (DNS)7 Which type of computer has an integrated mouse?

    desktop

    laptop

    mainframe

    server

    pocket PC

    Observable Description Max Value1 correctness of response 2 points for Option 20 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    1.2.3 Portable Devices8 What is the purpose of pop-up blocker software?

    It detects and removes spyware.

    It detects and removes viruses.

    It prevents the display of advertisement windows.

    It removes unwanted e-mail.

    Observable Description Max Value

    1 correctness of response 2 points for Option 30 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    8.3.1 Common Security Measures9 Which two causes of networking problems are related to the physical layer? (Choose two.)

    damaged cables and connectors

    incorrect addressing

    incorrect subnet mask

    overheated components

    incorrect default gateway

    Observable Description Max Value

    1 correctness of responseOption 1 and Option 4 are correct.1 point for each correct option.0 points if more options are selected than required.

    2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    9.2.1 Detecting Physical Problems10

    Refer to the exhibit. The security policy of an organization allows employees to connect to the office intranet from their homes. Which

    Page 3 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    4/16

    type of security policy is this?acceptable use

    incident handling

    network maintenance

    remote access

    Observable Description Max Value

    1 correctness of response 2 points for Option 40 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    8.3.1 Common Security Measures11 What statement describes the filtering of traffic via the use of Stateful Packet Inspection?

    It recognizes and filters predefined URLs

    It permits access that is based on the application.

    It permits access based on IP or MAC addresses.

    It permits incoming packets that are legitimate responses to requests from internal hosts.

    It translates an internal address or group of addresses into a public address that is sent across the network.

    Observable Description Max Value

    1 correctness of response 2 points for Option 40 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    8.4.1 What is a Firewall?12

    Refer to the exhibit. An educational institution needs to connect PC systems that use private IP addressing to the Internet. They havemultiple systems that need to access the Internet, but were only able to purchase one public IP address. What should be activated onthe Linksys integrated router to achieve this goal?

    authentication

    DHCP

    encryptionfirewall

    NAT

    WEP

    Observable Description Max Value

    1 correctness of response 2 points for Option 50 points for any other option 2

    This item references content from the following areas:

    Page 4 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    5/16

    CCNA Discovery: Networking for Home and Small Businesses

    5.4.3 Network Address Translation13 All hosts within a domain receive the same frame that originates from one of the devices. The domain is also bounded by routers. What

    type of domain is this?broadcast

    collision

    local

    multicast

    Observable Description Max Value

    1 correctness of response 2 points for Option 10 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    3.4.4 Broadcast Messaging14

    Refer to the exhibit. Assume that the exhibited output is from a host that is connected to a Linksys integrated router. What is the firstthing that should be checked if using a bottom-up troubleshooting approach?

    the default gateway on the host

    the IP address on the host

    the IP address on the router

    the link status LED on the front of the router

    the subnet mask on the host

    Observable Description Max Value

    1 correctness of response 2 points for Option 40 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    9.3.6 DHCP Issues15 How does a crossover cable connect two routers?

    It connects the pins that are used for receiving on one router to the pins that are used for receiving on the other router.

    It connects the pins that are used for transmitting on one router to the pins that are used for receiving on the other router.

    It disconnects the transmit pins and uses only the receive pins.

    It uses the same pins for transmitting and receiving.

    Observable Description Max Value

    1 correctness of response 2 points for Option 20 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    Page 5 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    6/16

    4.5.2 UTP Cables16 When terminating a UTP cable, why is it important to push the wires all the way into the end of the connector?

    to allow the cable to endure more stretching or twisting

    to ensure good electrical contact

    to ensure that the wires are in correct order

    to minimize crosstalk

    Observable Description Max Value

    1 correctness of response 2 points for Option 20 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    4.5.3 UTP Cable Termination17 Which three address ranges can be used to depict private IP addresses? (Choose three.)

    10.0.0.0 to 10.0.0.255

    127.16.0.0 to 127.16.255.255

    150.150.0.0 to 150.150.255.255

    172.16.1.0 to 172.16.1.255

    192.168.22.0 to 192.168.22.255

    200.100.50.0 to 200.100.50.255

    Observable Description Max Value

    1 correctness of responseOption 1, Option 4, and Option 5 are correct.1 point for each correct option.0 points if more options are selected than required.

    3

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    5.2.2 Public and Private IP Addresses18 As an assignment, a computer science student needs to present data in binary format. What are the two possible values that the student

    can use? (Choose two.)0

    12

    A

    F

    Observable Description Max Value

    1 correctness of responseOption 1 and Option 2 are correct.1 point for each correct option.0 points if more options are selected than required.

    2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    1.3.1 Representing Information Digitally19 What is the default subnet mask for the IP address 128.107.23.10?

    255.0.0.0

    255.255.0.0

    255.255.255.0

    255.255.255.255

    Observable Description Max Value

    1 correctness of response 2 points for Option 20 points for any other option 2

    Page 6 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    7/16

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    5.2.1 IP Address Classes and Default Subnet Masks20 Which adapter card would be required for a PC to exchange information with other PCs on a LAN?

    NIC

    video card

    sound card

    internal modem

    Observable Description Max Value

    1 correctness of response 2 points for Option 10 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    1.4.3 Adapter Cards21 A local PC has the correct configuration that is required to access the network. A ping command that is sourced at the PC does not

    receive a response from a remote device. Which operating system command might be used to determine where the connection failed?netstat

    tracert

    ipconfig

    nslookup

    Observable Description Max Value

    1 correctness of response 2 points for Option 20 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    9.2.5 Troubleshooting Using Tracert22 A network designer is working with a small company to determine the network type best suited to the needs of the company. Which two

    characteristics could the designer use to describe a peer-to-peer network to the owner of the company? (Choose two.)

    central administrationeasy to install

    low cost

    scalable

    secure

    Observable Description Max Value

    1 correctness of responseOption 2 and Option 3 are correct.1 point for each correct option.0 points if more options are selected than required.

    2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    3.1.5 Peer-to-Peer Networks23 A home user is looking for an ISP connection that provides high speed digital transmission over regular phone lines. What ISP

    connection type should be used?DSL

    dial-up

    satellite

    cell modem

    cable modem

    Observable Description Max Value

    Page 7 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    8/16

    1 correctness of response 2 points for Option 10 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    4.1.4 Options for Connecting to the ISP24 A user has reported a failure to connect to the network. Based on similar calls from other users in the same location, the network

    technician starts troubleshooting by entering the ipconfig command on the user computer. Which troubleshooting technique is thetechnician using?top-down

    bottom-up

    substitution

    divide-and-conquer

    Observable Description Max Value

    1 correctness of response 2 points for Option 40 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    9.1.3 Approaches to Troubleshooting25 What is an ISP?

    It is a standards body that develops cabling and wiring standards for networking.

    It is a protocol that establishes how computers within a local network communicate.

    It is an organization that enables individuals and businesses to connect to the Internet.

    It is a networking device that combines the functionality of several different networking devices in one.

    Observable Description Max Value

    1 correctness of response 2 points for Option 30 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    4.1.2 Internet Service Providers (ISPs)26 Which two automatic addressing assignments are supported by DHCP? (Choose two.)

    local server address

    subnet mask

    default gateway address

    physical address of the recipient

    physical address of the sender

    Observable Description Max Value

    1 correctness of responseOption 2 and Option 3 are correct.1 point for each correct option.0 points if more options are selected than required.

    2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    5.3.1 Static and Dynamic Address Assignment27 What is the purpose of TCP?

    to manage data links and physical network transmissions

    to specify the format of requests and responses that are exchanged between the client and server

    to assign the logical address and encapsulate the request into packets for routing to the destination

    to provide flow control and acknowledgment of packets that are exchanged between the client and server

    Page 8 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    9/16

    Observable Description Max Value

    1 correctness of response 2 points for Option 40 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    6.1.2 Role of Protocols in Client Server Communication28 A user starts a file transfer between a client machine and an FTP server. Which list correctly represents the sequence of protocols that

    are used by the client machine to encapsulate the FTP data traffic for transmission?FTP, TCP, IP, Network Access Protocols

    FTP, UDP, IP, Network Access Protocols

    FTP, IP, UDP, Network Access Protocols

    FTP, IP, TCP, Network Access Protocols

    Observable Description Max Value

    1 correctness of response 2 points for Option 10 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    6.1.3 TCP and UDP Transport Protocols29 Which type of attack involves flooding a server port with SYN messages?

    phishing

    brute force

    denial of service

    data manipulation

    Observable Description Max Value

    1 correctness of response 2 points for Option 30 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    8.2.2 Denial of Service and Brute Force Attacks30 Which attribute must be the same for wireless devices on one network to be able to communicate with devices on a different network?

    DNS server

    MAC address

    default gateway

    operating system

    wireless equipment vendor

    Observable Description Max Value

    1 correctness of response 2 points for Option 30 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    3.6.4 Connecting the Linksys Router31 How does a DMZ enhance network security for an organization?

    blocks viruses and spyware

    restricts internal user access to prohibited Internet sites

    allows external customer access to designated internal resources

    removes suspicious attachments from incoming and outgoing e-mail

    Page 9 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    10/16

    Observable Description Max Value

    1 correctness of response 2 points for Option 30 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    8.4.2 Using a Firewall32 When would infrared be used to connect network devices?

    when connecting multiple host devices to a wireless access point

    when synchronizing a PC with a PDA that is in line of sight

    when connecting a PC to a network switch that is located in another room

    when updating two access points that are located in separate buildings

    Observable Description Max Value

    1 correctness of response 2 points for Option 20 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    7.1.1 Wireless Technologies and Devices33 Which picture shows a USB port on a PC?

    Observable Description Max Value

    1 correctness of response 2 points for Option 20 points for any other option 2

    This item references content from the following areas:

    Page 10 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    11/16

    CCNA Discovery: Networking for Home and Small Businesses

    1.5.3 Installing Peripherals and Verifying Operation

    34 Which network design layer provides hosts with initial connectivity to the network?access

    core

    distribution

    network

    Observable Description Max Value

    1 correctness of response 2 points for Option 10 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    3.4.1 Access Layer35 Which wireless component allows wireless clients to gain access to a wired network?

    PDA

    STA

    access point

    wireless bridge

    Observable Description Max Value

    1 correctness of response 2 points for Option 30 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    7.2.2 Wireless LAN Components36 A network analyst is asked to create a physical topology map of the campus network. Which two items of information should be included

    in the map? (Choose two.)DNS entries

    cabling runs

    server group informationIP addressing scheme

    network device locations

    Observable Description Max Value

    1 correctness of responseOption 2 and Option 5 are correct.1 point for each correct option.0 points if more options are selected than required.

    2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    3.1.6 Network Topologies

    37

    Page 11 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    12/16

    Refer to the exhibit. If host H8 sends a message to host H5 and the destination MAC address is in the MAC tables of both switches,which host device or devices will receive the message?

    only host H5

    all hosts on the network

    all hosts that are connected to switch Sw1

    all hosts that are connected to switch Sw2 and host H5.

    all hosts that are connected to hub Hub1 and switch Sw1

    Observable Description Max Value

    1 correctness of response 2 points for Option 10 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    3.4.3 Function of Switches38 What does it mean when a problem is being escalated by a helpdesk?

    The helpdesk is following up on a resolved problem.

    The helpdesk has made the problem a lower priority.

    The helpdesk has solved the problem and is closing the ticket.

    The helpdesk is moving the problem to a higher level support staff.

    Observable Description Max Value

    1 correctness of response 2 points for Option 40 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    9.4.3 Using the Helpdesk39

    Refer to the exhibit. PC1 is unable to access the web server at 209.165.200.226/27. Based on the provided output, what is the mostlikely cause of the problem?

    PC1 is not plugged in to RTR1.

    Port 80 is already in use on PC1.

    No DNS server is configured on PC1.

    PC1 is configured with an incorrect IP address and default gateway.

    Page 12 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    13/16

    Observable Description Max Value

    1 correctness of response 2 points for Option 40 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    9.2.3 Troubleshooting Using Ipconfig9.2.4 Troubleshooting Using Ping9.2.6 Troubleshooting Using Netstat

    40 A network design engineer has been asked to design the IP addressing scheme for a customer network. The network will use IPaddresses from the 192.168.30.0/24 network. The engineer allocates 254 IP addresses for the hosts on the network but excludes192.168.30.0/24 and 192.168.30.255/24 IP addresses. Why must the engineer exclude the addresses from the allocated IP addresspool?

    192.168.30.0/24 and 192.168.30.255/24 IP addresses are reserved for the e-mail and DNS servers.

    192.168.30.0/24 and 192.168.30.255/24 IP addresses are reserved for outside Internet connectivity.

    192.168.30.0/24 is the network IP address and 192.168.30.255/24 is the IP broadcast address.192.168.30.0/24 is the IP address that is reserved for the default gateway, and the 192.168.30.255/24 IP address is reserved for theDHCP server.

    Observable Description Max Value

    1 correctness of response 2 points for Option 30 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    5.1.4 How IP Addresses and Subnet Masks Interact41 Which type of firewall is implemented by adding firewall functionality to an existing device, such as a router?

    appliance-based firewall

    server-based firewall

    integrated firewall

    personal firewall

    Observable Description Max Value

    1 correctness of response 2 points for Option 3

    0 points for any other option2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    8.4.1 What is a Firewall?42 Some new features are available for the OS that is currently running on a user's PC. What method should be chosen so that the user

    can install these new feature sets?clean install

    multi-boot

    upgrade

    virtualization

    Observable Description Max Value1 correctness of response 2 points for Option 30 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    2.2.1 OS Installation Methods43 Which type of network supports DHCP and DNS services for network users in a network domain?

    client/server

    peer-to-peer

    Page 13 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    14/16

    hierarchical

    ad hoc

    Observable Description Max Value

    1 correctness of response 2 points for Option 10 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    3.1.5 Peer-to-Peer Networks44 Which two TCP/IP properties must match on hosts in the same LAN if the hosts are to be able to communicate with each other?

    (Choose two.)the subnet mask

    the DNS server configurations

    the default gateway configurations

    the host portion of the IP address

    the network portion of the IP address

    Observable Description Max Value

    1 correctness of responseOption 1 and Option 5 are correct.1 point for each correct option.

    0 points if more options are selected than required.

    2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    5.1.3 Parts of an IP Address45

    Refer to the exhibit. When www.cisco.com is entered in a browser window on a PC, the web page is unavailable. While troubleshootingthis problem, the network technician executes the nslookup command as well as the ping command to the web server. What is thelikely reason that the web server home page cannot be displayed?

    The DNS server service needs to be installed on the PC.

    A DNS server is not available to resolve the name.

    The reason that the web server is unable to display the web page is that the web server is unavailable.

    The increased response time displayed in the ping may indicate a delay in server response time.

    Observable Description Max Value

    2 points for Option 2

    Page 14 of 16Cisco Networking Academy

    4/25/2012http://ev-iip.netacad.net/virtuoso/delivery/pub-doc/exam_viewer.shtml?QUESTIONS_PE ...

  • 8/2/2019 Ccna d1 - Final

    15/16

  • 8/2/2019 Ccna d1 - Final

    16/16

    0 points for any other option

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    6.2.4 Email Clients and Servers50 What component of a personal computer is responsible for the processing of all data?

    RAM

    CPU

    firewall

    system bus

    operating system

    Observable Description Max Value

    1 correctness of response 2 points for Option 20 points for any other option 2

    This item references content from the following areas:

    CCNA Discovery: Networking for Home and Small Businesses

    1.4.2 Motherboard, CPU, and RAM

    Reset View

    Showing 1 of 1 Prev Page: 1 Next

    Close Window

    All contents copyright 2001-2012 Cisco Systems, Inc. All rights reserved. Privacy Statement and Trademarks.

    Page 16 of 16Cisco Networking Academy