ccna - craw.in · ccna course content network fundamentals • compare and contrast osi and tcp/ip...

Official Web: www.craw.inCall Us: +91-9650202445 | +919650677445

CCNA Cisco Certified Network Associate


ABOUT USWHO WE ARECRAW Cyber Security is a Training and Consulting Company with high industry training and consulting Standards. CRAW Cyber Security Deals with various kinds of products like It Infrastructure Implementation, Security Implementations, Security Audits, Vulnerability Assessments and Penetration Testing. CRAW Cyber Security focus on delivering Best industry Certifications from top vendors and testing facilities for various Vendors.WHAT WE TRY TO GIVEWe try to give you real industry standards with best possible quality to all ourcustomers and clients. We focus on Various sections of Society and running a nationallevel campaign to literate Students from all parts of company who can’t Afford “BasicIT Computer Training” .We wish we could teach as many students from all over theworld and make it a beautiful place to work. We work on minimum gross margins tostrength the Indian It infrastructure.

OUR COURSESCertifications and Training’s conducted by Craw Security Pvt Ltd are CCNA, CCNASecurity, CCNP, CCNP Security, Ethical Hacking, ECSA, CNDA, CND, OSCP, CompTIASecurity+, CompTIA A+, CompTIA N+, CompTIA ,Penetration Testing, ComputerForensic Hacking Investigator, and many More.

CCNA COURSE CONTENT Network Fundamentals• Compare and contrast OSI and TCP/IP models

• Compare and contrast TCP and UDP protocols

• Describe the impact of infrastructure components in an enterprise network– Firewalls

– Access points

– Wireless controllers

• Compare and contrast collapsed core and three-tier architectures

• Compare and contrast network topologies– Star

– Mesh

– Hybrid

• Select the appropriate cabling type based on implementation requirements

• Apply troubleshooting methodologies to resolve problems

• Select the appropriate cabling type based on implementation requirements

• Apply troubleshooting methodologies to resolve problems– Perform and document fault isolation

– Resolve or escalate

– Verify and monitor resolution

Call Us: +91-9650202445 | +919650677445 Official Web: www.craw.in

• Configure, verify, and troubleshoot IPv4 addressing and subnetting

• Compare and contrast IPv4 address types– Unicast

– Broadcast– Multicast

• Describe the need for private IPv4 addressing

• Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment

• Configure, verify, and troubleshoot IPv6 addressing

• Configure and verify IPv6 Stateless Address Auto Configuration

LAN Switching Technologie• Describe and verify switching concepts

– MAC learning and aging

– Frame switching

– Frame flooding

– MAC address table

• Interpret Ethernet frame format

• Troubleshoot interface and cable issues (collisions, errors, duplex, speed) Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple

• Switches– Access ports (data and voice)– Default VLAN


• Configure, verify, and troubleshoot inters witch connectivity– Trunk ports

– Add and remove VLANs on a trunk

– DTP, VTP (v1&v2), and 802.1Q

– Native VLAN

• Configure, verify, and troubleshoot STP protocols– STP mode (PVST+ and RPVST+)

– STP root bridge selection

• Configure, verify and troubleshoot STP related optional features– PortFast

– BPDU guard

• Configure and verify Layer 2 protocols– Cisco Discovery Protocol

– LLDP

• Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel– Static

– PAGP

– LACP

• Describe the benefits of switch stacking and chassis aggregation


Routing Technologies• Describe the routing concepts

– Packet handling along the path through a network

– Forwarding decision based on route lookup

• Interpret the components of a routing table– Prefix

– Network mask

– Next hop

– Routing protocol code

– Administrative distance

– Metric

– Gateway of last resort

• Describe how a routing table is populated by different routing information sources– Admin distance

• Configure, verify, and troubleshoot inter-VLAN routing– Router on a stick

– SVI

• Compare and contrast static routing and dynamic routing

• Compare and contrast distance vector and link state routing protocols

• Compare and contrast interior and exterior routing protocols

• Configure, verify, and troubleshoot IPv4 and IPv6 static routing– Default route

– Network route

– Host route

– Floating static


• Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4(excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

• Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)

• Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering,manualsummarization, redistribution)

• Troubleshoot basic Layer 3 end-to-end connectivity issues

WAN Technologies• Configure and verify PPP and MLPPP on WAN interfaces using local authentication

• Configure, verify, and troubleshoot PPPoE client-side interfaces using local Authentication

• Describe WAN topology options– Point-to-point

– Hub and spoke

– Full mesh

– Single vs dual-homed

Infrastructure Services• Describe DNS lookup operation

• Configure and verify DHCP on a router (excluding static reservations)– Server

– Relay

– Client

– TFTP, DNS, and gateway options


• Troubleshoot client- and router-based DHCP connectivity issues• Configure, verify, and troubleshoot basic HSRP

– Priority– Preemption– Version

• Configure, verify, and troubleshoot inside source NAT– Static– Pool– PAT

• Configure and verify NTP operating in a client/server mode

Infrastructure SecurityConfigure, verify, and troubleshoot port security– Static– Dynamic– Sticky– Max MAC addresses– Violation actions– Err-disable recovery

• Describe common access layer threat mitigation techniques– DHCP snooping– Nondefault native VLAN


Configure, verify, and troubleshoot basic device hardening• Local authentication

• Secure password

• Access to device

-Source address

-Telnet/SSH

• Perform device maintenance

-Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)

-Password recovery and configuration register

-File system management

• Use Cisco IOS tools to troubleshoot and resolve problems

-Ping and traceroute with extended option

-Terminal monitor

-Log events

-Local SPAN



TARGET AUDIENCEIndividuals▪ School Students▪ College Students▪ IT Professionals▪ IT Officers▪ IT and LAW

Officers

Corporate▪ IT Training Firms/Organizations/Society▪ IT Consultants▪ IT Experts▪ IT Officers▪ IT Institutions & Colleges▪ IT Graduated or Computer Science

Students

GovernanceSecurity Agencies | Security Groups | Govt. IT Institutions | IT Govt. & Security Officers.


BENEFITS OF TRAINING

Training Certificate

Toolkit/ Software

Campus Ambassador

Workshop Passes

Goodies/ Gifts Exam1 Years

Membership


WHAT IS ROUTING & SWITCHINGAs Enterprises migrate toward controller based architectures, the role and skillsrequired of a core network engineer are evolving and more vital than ever. To preparefor this network transition, the CCNA Routing and Switching certification will notonly prepare you with the knowledge of foundational technologies, but ensure youstay relevant with skill sets needed for the adoption of next generation technologies.

LEARNING PATH

CCNARouting & Switching

CCNASecurity

CCNAService

provider


TRAININGCONTENTS & DETAILS

➢ Network Fundamentals ➢ LAN Switching Technologies ➢ Routing Technologies ➢ WAN Technologies ➢ Infrastructure Services ➢ Infrastructure Security ➢ Infrastructure Management

8 DAYS 15 DAYS 30 DAYS

Sunday Tuesday Friday

Batch Starting From

Training Duration


OUR PARTNERS

www.craw.in Email:[email protected] www.crawsecurity.com

BATCH OPTIONS

WEEKDAY CLASSESMonday to FridayDuration : 2-3 HoursNumber of classes: 40-50 Hours(Instructor-Led Training) 8:2 Practical Theory Ratio

WEEKEND CLASSESEvery Sunday and SaturdayDuration : 4 to 8 hours.Number of classes : (40-50 Hours)8:2 Practical Theory Ratio

Regular BatchMonday To Friday Batch

Timings10:00 -12:001:00 – 3:003:00 – 5:005:00 – 7:00

Alternate DaysMon-Wed-Fri Tue-Thu-Sat

Batch Timings:10:00 -12:001:00 – 3:003:00 – 5:005:00 – 7:00

WeekendSat-Sun

Batch Timings:10:00 -01:001:00 – 4:004:00 – 7:00

Sunday OnlyBatch Timings:

9:00 -01:001:00 – 5:005:00 –8:00



Classroom Training

Instructor-led training provides a comfortable teaching environment with instructors that are familiar

with the certification process and can help you master your certification exam. Find your instructor

now. There’s a wealth of training materials available that match your learning needs and learning style.

Whether you are studying on your own, or in a classroom environment, we recommend EC-Council and

CISCO Authorized Quality Curriculum training materials that will help you get ready for your

certification exam and pass the test


TAKE A CAMPUS TOUR


CONTACTUS

CRAW SECURITY

011-40394315 | +91-9650202445 | [email protected]

1st Floor, Plot no. 4, Lane no. 2, Kehar Singh Estate,Westend Marg, Behind Saket Metro Station,

New Delhi - 110030


THANK YOU

ccna - craw.in · ccna course content network fundamentals • compare and contrast osi and tcp/ip...

Documents