ccna 4 v4 exploración del examen final 100

24
CCNA 4 V4 Exploración del examen final 100% nueva actualización CCNA 4 Exploration V4 Final Exam 100% new Update CCNA 4 V4 Exploración del examen final 100% nueva actualización 1. 1. Which of the following describes the roles of devices in a WAN? ¿Cuál de las siguientes opciones describe las funciones de los dispositivos en una red WAN? (Choose three.) (Elija tres.) • A CSU/DSU terminates a digital local loop. • Una CSU / DSU finaliza un bucle local digital. A modem terminates a digital local loop. Un módem termina un bucle local digital. A CSU/DSU terminates an analog local loop. Una CSU / DSU finaliza un bucle local analógico. • A modem terminates an analog local loop. • Un módem termina un bucle local analógico. • A router is commonly considered a DTE device. • Un router que comúnmente se considera un dispositivo DTE. A router is commonly considered a DCE device. Un router es normalmente considerado un dispositivo DCE. 2. 2. What value in the address field of a Frame Relay header identifies the destination of the frame? ¿Qué valor en el campo de la dirección de un encabezado de Frame Relay identifica el destino de la trama? CIR CIR DE DE • DLCI • DLCI ISDN RDSI

Upload: edybyte

Post on 27-Apr-2015

2.085 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: CCNA 4 V4 Exploración del examen final 100

CCNA 4 V4 Exploración del examen final 100% nueva actualización

CCNA 4 Exploration V4 Final Exam 100% new Update CCNA 4 V4 Exploración del examen final 100% nueva actualización

1. 1. Which of the following describes the roles of devices in a WAN? ¿Cuál de las siguientes opciones describe las funciones de los dispositivos en una red WAN? (Choose three.) (Elija tres.)

• A CSU/DSU terminates a digital local loop. • Una CSU / DSU finaliza un bucle local digital.

A modem terminates a digital local loop. Un módem termina un bucle local digital.

A CSU/DSU terminates an analog local loop. Una CSU / DSU finaliza un bucle local analógico.

• A modem terminates an analog local loop. • Un módem termina un bucle local analógico.

• A router is commonly considered a DTE device. • Un router que comúnmente se considera un dispositivo DTE.

A router is commonly considered a DCE device. Un router es normalmente considerado un dispositivo DCE.

2. 2. What value in the address field of a Frame Relay header identifies the destination of the frame? ¿Qué valor en el campo de la dirección de un encabezado de Frame Relay identifica el destino de la trama?

CIR CIR

DE DE

• DLCI • DLCI

ISDN RDSI

FRAD FRAD

PVC PVC

3. 3. The serial PPP link between the Left and Right routers is configured as shown in the diagram. El enlace PPP serial entre la izquierda y la derecha routers se configura como se muestra en el diagrama. Which configuration issue explains why the link is unable to establish a PPP session? ¿Qué problema de configuración explica por qué el enlace no puede establecer una sesión PPP?

Page 2: CCNA 4 V4 Exploración del examen final 100

The IP addresses must be on different subnets. Las direcciones IP deben estar en subredes diferentes.

• The usernames are misconfigured. • Los nombres de usuario están mal configurados.

The passwords must be different for the CHAP authentication. Las contraseñas deben ser diferentes para la autenticación CHAP.

The clock rate must be 56000. La velocidad de reloj debe ser 56 mil.

The clock rate is configured on the wrong end of the link. La velocidad de reloj está configurada en el extremo equivocado del enlace.

Interface serial 0/0 on Left must connect to interface serial 0/1 on Right. La interfaz serial 0 / 0 en la izquierda debe conectarse a la interfaz serial 0 / 1 a la derecha.

4. 4. The output of the show interfaces serial 0/0 command for a frame-relay connection indicates that the serial line is up but the line protocol is down. La salida del show interfaces serial 0 / 0 para una conexión frame relay indica que la línea de serie, pero la del protocolo de línea está inactivo. What are possible causes for this? ¿Cuáles son las posibles causas de esto? (Choose two.) (Elija dos.)

• There is an LMI-type mismatch between the Frame Relay switch and the router. • Hay un desfase de LMI-tipo entre el switch Frame Relay y el router.

There is no clock present on the serial interface. No hay presente reloj en la interfaz en serie.

The interface is shut down. La interfaz se apaga.

RARP is not functioning on the router. RARP no está funcionando en el router.

• The cable is disconnected. • El cable está desconectado.

5. 5. Which statements are correct about the point in the network where the responsibility of the service provider ends? ¿Qué afirmaciones son correctas sobre el punto de la red donde la responsabilidad del prestador de servicios termina? (Choose three.) (Elija tres.)

• The International point is on the customer side of the network terminating unit(NTU). • El punto internacional está en el lado del cliente de la unidad de terminación de red (NTU).

• The United States point is at the interface of the customer-provided equipment and the local loop. • El punto de los Estados Unidos se encuentra en la interfaz del cliente proporcionado por el equipo y el bucle local.

The responsibility for this point is controlled by IANA. La responsabilidad de este punto se controla por la IANA.

Page 3: CCNA 4 V4 Exploración del examen final 100

• The point is called the demarcation point. • El punto se llama punto de demarcación.

The point is typically located at the service provider's central office. El punto se encuentra normalmente en la oficina central del proveedor de servicios.

The point is located between the customer's local area networks. El punto se encuentra entre las redes de los clientes de área local.

6. 6. While prototyping an internetwork in the corporate lab, a network administrator is testing a serial link between serial 0/0 interfaces on two routers. Mientras que una interconexión de prototipos en el laboratorio empresarial, un administrador de red es la prueba de un enlace serie entre serial 0 / 0 en dos interfaces de los routers. The labels on the serial cable ends have been damaged and are unreadable. Las etiquetas de los extremos del cable de serie han sido dañadas y no se pueden leer. What command can be issued to determine which router is connected to the DCE cable end? ¿Qué comando se pueden emitir para determinar qué router está conectado al extremo del cable DCE?

show interfaces serial 0/0 mostrar el serial 0 / 0 interfaces

show version mostrar la versión

• show controllers serial 0/0 • Los mandos a mostrar el serial 0 / 0

show protocols serial 0/0 mostrar el serial 0 / 0 protocolos

show status serial 0/0 mostrar el estado de serie de 0 / 0

7. 7. A network technician determines DHCP clients are not working properly. Un técnico de redes determina los clientes DHCP no están funcionando correctamente. The clients are receiving IP configuration information from a DHCP server configured on the router but cannot access the Internet. Los clientes están recibiendo información de configuración de IP de un servidor DHCP configurado en el router, pero no puede acceder a Internet. From the output in the graphic, what is the most likely problem? Desde la salida en el gráfico, ¿cuál es el problema más probable?

The DHCP server service is not enabled. El servicio de servidor DHCP no está habilitado.

The inside interface for DCHP is not defined. La interfaz de interior para DCHP no está definida.

• The DHCP pool is not bound to the interface. • El conjunto DHCP no está vinculada a la interfaz.

The pool does not have a default router defined for the clients. La piscina no tiene un router por defecto definido para los clientes.

Page 4: CCNA 4 V4 Exploración del examen final 100

All the host addresses have been excluded from the DHCP pool. Todas las direcciones de acogida han sido excluidos de la piscina DHCP.

8. 8. A technician enters the interface serial 0/0.1 multipoint command when configuring a router. Un técnico entra en la interfaz serial 0/0.1 comando multipunto al configurar un router. What effect will the multipoint keyword have in this configuration? ¿Qué efecto tendrá la palabra clave multipunto que en esta configuración? (Choose two.) (Elija dos.)

• Split-horizon issues will need to be resolved for this network if RIP is the routing protocol. • cuestiones de horizonte dividido tendrá que ser resuelto por esta red en caso de RIP es el protocolo de enrutamiento.

A subinterface will be defined for each PVC. Una subinterfaz se definirá para cada PVC.

• All the participating interfaces of remote routers will be configured in the same subnet. • Todas las interfaces que participan de los routers remotos se configurarán en la misma subred.

A single DLCI will be used to define all the PVCs to the remote routers. Un solo DLCI se utilizará para definir todos los PVC de los routers remotos.

An IP address will need to be configured on the main interface. Una dirección IP tendrá que estar configurada en la interfaz principal.

9. 9. When configuring a Frame Relay connection, when should a static Frame Relay map be used? Al configurar una conexión Frame Relay, ¿cuándo debe un mapa estático de Frame relé se utiliza? (Choose two.) (Elija dos.)

when the remote router is a non-Cisco router cuando el router remoto es un no-router Cisco

• when the remote router does not support Inverse ARP • cuando el router remoto no admite ARP inverso

when the local router is using IOS Release 11.1 or earlier cuando el router local está utilizando IOS versión 11.1 o anterior

• when broadcast traffic and multicast traffic over the PVC must be controlled • cuando el tráfico de difusión y el tráfico multicast sobre el PVC debe ser controlado

when globally significant rather than locally significant DLCIs are being used cuando de importancia mundial en lugar de a nivel local DLCI significativos se están utilizando

Page 5: CCNA 4 V4 Exploración del examen final 100

10. 10. Which router command would be used to associate a Layer 2 address with the corresponding Layer 3 address in the internetwork in the diagram? ¿Qué comando del router se utiliza para asociar una dirección de Capa 2 con la correspondiente dirección de Capa 3 en la interconexión de redes en el diagrama?

RouterA(config-if)#frame-relay pvc 100 192.168.15.2 RouterA (config-if) # frame-relay pvc 100 192.168.15.2

RouterA(config-if)#dialer-map ip 192.168.15.1 100 broadcast RouterA (config-if) # ip marcador de ruta 192.168.15.1 100 de radiodifusión

• RouterA(config-if)#frame-relay map ip 192.168.15.2 100 broadcast • RouterA (config-if) # ip frame-relay map 192.168.15.2 100 de radiodifusión

RouterA (config-if)#dialer-map 192.168.15.1 101 serial 0 broadcast RouterA (config-if) # marcador de ruta 192.168.15.1 101 serial 0 difusión

RouterA (config-if)#frame-relay dlci 101 192.168.15.1 broadcast RouterA (config-if) # DLCI Frame Relay-101 192.168.15.1 difusión

RouterA (config-if)#dialer-map 192.168.15.1 inverse-arp broadcast RouterA (config-if) # marcador de ruta 192.168.15.1 difusión inversa-arp

11. 11. Which of the following ISDN protocols is responsible for call setup and call teardown? ¿Cuál de los siguientes protocolos RDSI es el responsable de establecimiento de llamada y desmontaje llamada?

• ITU-T Q.921 • UIT-T Q.921

ITU-T Q.931 UIT-T Q.931

ITU-T I.430 UIT-T I.430

ITU-T I.431 UIT-T I.431

12. 12. What are two ways to resolve split-horizon issues in a Frame Relay network? ¿Cuáles son dos formas de resolver los problemas de horizonte dividido en una red Frame Relay? (Choose two.) (Elija dos.)

create a full-mesh topology crear una topología de malla completa

disable Inverse ARP desactivar ARP Inverso

use point-to-point subinterfaces uso de subinterfaces punto a punto

Page 6: CCNA 4 V4 Exploración del examen final 100

use multipoint subinterfaces uso de subinterfaces multipunto

remove the broadcast keyword from the frame-relay map command eliminar la palabra clave transmitido desde el comando frame-relay map

13. 13. What is the purpose of the command marked with an arrow shown in the partial configuration output of a Cisco 806 broadband router? ¿Cuál es el propósito del comando marcados con una flecha que se muestra en la configuración de salida parcial de un router de banda ancha Cisco 806?

defines which addresses are allowed out of the router define qué direcciones se les permite salir del router

• defines which addresses are allowed into the router • define qué direcciones se permiten en el router

defines which addresses can be translated define qué direcciones se puede traducir

defines which addresses are assigned to a NAT pool define qué direcciones se asignan a un pool de NAT

14. 14. A system administrator is unable to ping the Serial0/0 interface of RouterB from RouterA. Un administrador de sistema no puede hacer ping a la Serial0 / 0 interfaz de RouterB de RouterA. During the troubleshooting process, the following facts are established: Durante el proceso de solución de problemas, los hechos se establecen las siguientes:

- IP addressing and subnet masks are correct. - Las direcciones IP y máscaras de subred son correctas.

- RouterA is a Cisco router and RouterB is a router from another vendor. - RouterA es un router Cisco y RouterB es un router de otro proveedor.

- RouterA is configured with the default encapsulation. - RouterA está configurado con el encapsulamiento por defecto.

- The serial interfaces on both routers are up. - Las interfaces seriales de ambos routers están arriba.

- The protocol is down on the serial interfaces of both routers. - El protocolo se establecen en las interfaces seriales de ambos routers.

What should the administrator do to solve the problem? ¿Qué debería hacer el administrador para resolver el problema?

Add a clock rate on RouterA. Agregar a una velocidad de reloj de RouterA.

Enable the serial interface on RouterB. Habilitar la interfaz serial RouterB.

Page 7: CCNA 4 V4 Exploración del examen final 100

• Change the encapsulation on both routers to PPP. • Cambiar el encapsulamiento de ambos routers a PPP.

Connect the serial cable to the correct interface on RouterB. Conecte el cable serie a la interfaz correcta en RouterB.

Use the correct serial cable to attach the CSU/DSU to RouterB. Utilice el cable de serie correcto para conectar la CSU / DSU para RouterB.

15. 15. An ISDN circuit from a branch office is remaining connected to the regional office. Un circuito RDSI de una sucursal es permanecer conectado a la oficina regional. A network administrator determines a user has initiated a continuous ping from a desktop computer to the regional office. Un administrador de red determina que un usuario ha iniciado un ping continuo desde una computadora de escritorio de la oficina regional. Which configuration change would allow the ISDN circuit to disconnect during any attempts to ping, while otherwise functioning properly? ¿Qué cambio de configuración que permiten al circuito RDSI desconectarse durante cualquier intento de hacer ping, mientras que lo contrario funciona correctamente?

change DDR from legacy to dialer profiles DDR cambio de legado a los perfiles de marcador

remove the dialer list statement from the configuration quite la instrucción lista de marcador de la configuración

• change the dialer list to exclude ICMP as interesting • cambiar la lista de marcación para excluir ICMP tan interesante

disable inverse ARP desactivar inversa ARP

16. 16. Below is a list of DDR steps. A continuación se muestra una lista de pasos de DDR. Which of the following identifies the proper order of DDR? ¿Cuál de las siguientes identifica el orden correcto del DDR?

1 - dial number is looked up 1 - número de línea se busca

2 - interesting traffic triggers DDR 2 - el tráfico de interés activa DDR

3 - route to destination is determined 3 - la ruta hasta el destino se determina

4 - call is made 4 - llamada se realiza

1,2,3,4 1,2,3,4

1,3,2,4 1,3,2,4

Page 8: CCNA 4 V4 Exploración del examen final 100

2,3,1,4 2,3,1,4

2,1,3,4 2,1,3,4

• 3,2,1,4 • 3,2,1,4

3,1,2,4 3,1,2,4

17. 17. Which protocol should be chosen to support WAN connectivity in a multi-vendor system and provide strong security through authentication? ¿Qué protocolo se debe elegir para apoyar la conectividad WAN en un sistema de múltiples proveedores y proporciona una gran seguridad a través de la autenticación?

NAT with DHCP NAT con DHCP

Frame Relay Frame Relay

HDLC with encryption HDLC con cifrado

HDLC with CHAP HDLC con CHAP

PPP with PAP PPP con PAP

• PPP with CHAP • PPP con CHAP

18. 18. Which of the following are valid steps for a basic ISDN BRI configuration? ¿Cuál de los siguientes son pasos válidos para una configuración básica RDSI BRI? (Choose two.) (Elija dos.)

create subinterfaces crear subinterfaces

define the LMI type definir el tipo de LMI

set the SPIDs if required by the ISDN switch establecer el SPID si es requerido por el interruptor de la RDSI

set the interface DLCI establecer la interfaz DLCI

set the switch type establecer el tipo de cambio

specify the encapsulation as either Cisco or IETF especificar la encapsulación, ya sea como Cisco o IETF

19. 19. A branch office reports excessive connect time charges for an ISDN circuit used to connect to the regional office. Una sucursal informes excesivos costes de tiempo de conexión para un circuito RDSI

Page 9: CCNA 4 V4 Exploración del examen final 100

utilizado para conectarse a la oficina regional. Upon investigation of this issue, it is discovered that when an ISDN connection is initiated to the regional office it remains connected for an excessive amount of time. Sobre la investigación de este problema, se descubre que cuando una conexión RDSI se inicia a la oficina regional que permanece conectado a una cantidad excesiva de tiempo. Which of the following configuration changes could be made to DDR on the router to reduce these connect time charges? ¿Cuál de los siguientes cambios de configuración se podría hacer con el DDR en el router para reducir esos gastos de tiempo de conexión?

use PPP multilink uso multienlace PPP

lower idle timer setting contador de tiempo menor velocidad de ralentí

use CHAP authentication utilizar la autenticación CHAP

• change DDR from legacy to dialer profiles DDR • cambio de legado a los perfiles de marcador

20. 20. A network administrator is having difficulty in establishing a serial link between a Cisco router and a router from another vendor. Un administrador de red está teniendo dificultad para establecer un enlace serial entre un router Cisco y un router de otro proveedor. Both routers are configured for HDLC encapsulation. Ambos routers están configurados para la encapsulación HDLC. Which statements are true regarding this configuration? Que las declaraciones son verdaderas con respecto a esta configuración? (Choose two.) (Elija dos.)

• The Cisco HDLC frame uses a proprietary "Type" field that may not be compatible with equipment of other vendors. • El marco HDLC de Cisco utiliza una propiedad "Tipo" de campo que no sea compatible con equipos de otros proveedores.

HDLC requires a clock rate to be configured on the routers at both ends of the serial link. HDLC requiere un tipo de reloj que se configuran en los routers de ambos extremos del enlace serial.

• PPP encapsulation is recommended for serial links between equipment from multiple vendors. • encapsulación PPP se recomienda para los enlaces seriales entre equipos de múltiples proveedores.

Usernames must be configured at both ends of the HDLC serial link. Los nombres de usuario debe estar configurado en ambos extremos del enlace serial HDLC.

The HDLC vendor type must be enabled on the Cisco router. El tipo de proveedor HDLC debe estar habilitado en el router Cisco.

There is a mismatch in the HDLC authentication password configurations. Hay un desajuste en las configuraciones de autenticación de contraseña HDLC.

Page 10: CCNA 4 V4 Exploración del examen final 100

21. 21. Given the partial router configuration in the graphic, why does the workstation with the IP address 192.168.1.153/28 fail to access the Internet? Dada la configuración del router parcial en el gráfico, ¿por qué la estación de trabajo con la dirección IP no 192.168.1.153/28 para acceder a Internet? (Choose two.) (Elija dos.)

• The NAT inside interfaces are not configured properly. • El NAT dentro de interfaces no se configuran correctamente.

The NAT outside interface is not configured properly. La interfaz externa de NAT no está configurado correctamente.

• The router is not properly configured to use the access control list for NAT. • El router no está correctamente configurado para utilizar la lista de control de acceso para NAT.

The NAT pool is not properly configured to use routable outside addresses. El pool de NAT no está correctamente configurado para utilizar direcciones enrutables exterior.

The access control list does not include the IP address 192.168.1.153/28 to access the Internet. La lista de control de acceso no incluye el 192.168.1.153/28 dirección IP para acceder a Internet.

22. 22. The serial PPP link between the Left and Right routers is configured as shown in the diagram. El enlace PPP serial entre la izquierda y la derecha routers se configura como se muestra en el diagrama. Which configuration issue will prevent IP traffic from crossing this link? ¿Qué problema de configuración evitará que el tráfico IP desde el cruce de este vínculo?

The passwords must be different for the CHAP authentication. Las contraseñas deben ser diferentes para la autenticación CHAP.

The usernames are misconfigured. Los nombres de usuario están mal configurados.

The clock rate must be 56000. La velocidad de reloj debe ser 56 mil.

The clock rate is configured on the wrong end of the link. La velocidad de reloj está configurada en el extremo equivocado del enlace.

• The IP addresses must be on the same subnet. • Las direcciones IP deben estar en la misma subred.

Interface serial 0/0 on Left must connect to interface serial 0/1 on Right. La interfaz serial 0 / 0 en la izquierda debe conectarse a la interfaz serial 0 / 1 a la derecha.

23. 23. What causes a DDR call to be placed? ¿Qué causa una llamada DDR para colocar?

dial string cadena dial

Page 11: CCNA 4 V4 Exploración del examen final 100

DLCI DLCI

idle time out tiempo de inactividad de

• interesting traffic • interesantes tráfico

PVC PVC

24. 24. Which two layers of the OSI model are described by WAN standards? ¿Qué dos capas del modelo OSI se describen los estándares WAN?

Application Layer, Physical Layer Capa de aplicación, la capa física

• Data Link Layer, Physical Layer • Capa de enlace de datos, la capa física

Data Link Layer, Transport Layer Capa de enlace de datos, la capa de transporte

Physical Layer, Network Layer La capa física, capa de red

25. 25. A technician is testing RouterA in the graphic. Un técnico está probando RouterA en el gráfico. What is the condition of the circuit? ¿Cuál es la condición del circuito?

The routers are configured for different encapsulations. Los routers están configurados para diferentes encapsulados.

• The clock rate is not properly configured on the routers. • La velocidad del reloj no está correctamente configurado en el router.

The circuit from WAN provider has failed. El circuito del proveedor de la WAN ha fallado.

Authentication is not properly configured on the routers. La autenticación no está correctamente configurado en el router.

The circuit is functioning properly. El circuito está funcionando correctamente.

26. 26. A network administrator must provide WAN connectivity between a central office and three remote sites: Orlando, Atlanta, and Phoenix. Un administrador de red debe proporcionar conectividad WAN entre una oficina central y tres sitios remotos: Orlando, Atlanta y Phoenix. The Orlando and Atlanta remote offices receive sales orders and transmit shipping confirmations to the Central office consistently throughout the day. El Orlando y Atlanta oficinas remotas reciben órdenes de venta y transmitir las confirmaciones de envío a la oficina Central constantemente a lo largo del día. The Phoenix remote office consists of one salesperson traveling through the southwest territory. La oficina de

Page 12: CCNA 4 V4 Exploración del examen final 100

Phoenix a distancia se compone de un vendedor de viaje por el territorio al suroeste. The salesperson occasionally needs to connect to the Central office for e-mail access. El vendedor de vez en cuando necesita conectarse a la oficina central para acceso al correo electrónico. How should the network administrator connect the remote sites to the Central office? ¿Cómo debería el administrador de red conectar los sitios remotos a la oficina central? (Choose two.) (Elija dos.)

• Connect to the Atlanta and Orlando remote offices with Frame Relay connections. • Conectar a los Atlanta y Orlando oficinas remotas con conexiones Frame Relay.

Connect to the Atlanta and Orlando remote offices with ISDN connections. Conéctese a la de Atlanta y Orlando oficinas remotas con conexiones RDSI.

Connect to the Atlanta and Orlando remote offices with POTS dial-up connections. Conéctese a la de Atlanta y Orlando oficinas remotas con POTS conexiones de acceso telefónico.

Connect to the Phoenix remote office with a Frame Relay connection. Conectarse a la oficina de Phoenix a distancia con una conexión Frame Relay.

• Connect to the Phoenix remote office with a POTS dial-up connection. • Conectar a la oficina de Phoenix a distancia con un POTES conexión de acceso telefónico.

27. 27. When a Frame Relay switch detects an excessive buildup of frames in its queue, which of the following may occur? Cuando un switch Frame Relay detecta una acumulación excesiva de tramas en su cola, ¿cuál de las siguientes se puede producir? (Choose two.) (Elija dos.)

• Frames with the DE bit set are dropped from the switch queue. • Marcos con el bit DE se quitan de la cola del interruptor.

Frames with the FECN and BECN bits set are dropped from the switch queue. Marcos con los bits FECN y BECN establecidos se quitan de la cola del interruptor.

Frames in excess of the CIR are not accepted by the switch. Marcos en exceso del CIR no son aceptadas por el interruptor.

The switch sets the FECN bit on all frames it places on the congested link and sets the BECN bit on all frames it receives on the congested link. El interruptor establece el bit FECN en todas las tramas que coloca en el enlace congestionado y establece el bit BECN en todas las tramas que recibe en el enlace congestionado.

• The switch sets the FECN bit on all frames it receives on the congested link and sets the BECN bit on all frames it places on the congested link. • El interruptor establece el bit FECN en todas las tramas que recibe en el enlace congestionado y establece el bit BECN en todas las tramas que coloca en el enlace congestionado.

Page 13: CCNA 4 V4 Exploración del examen final 100

28. 28. A system administrator is troubleshooting a connectivity issue between two routers in a new installation. Un administrador del sistema de solución de problemas es un problema de conectividad entre dos routers en una nueva instalación. The administrator enters the debug ppp authentication command on the WHSE router. El administrador ingresa el comando ppp autenticación de depuración en el router WHSE. The graphic shows a part of the output received. El gráfico muestra una parte de la producción recibida. From this output, what is the most likely cause of this connectivity issue? Desde esta salida, ¿cuál es la causa más probable de este problema de conectividad?

There is not a route to the remote router. No es una ruta al router remoto.

The ISDN circuit on the remote router has failed. El circuito RDSI en el router remoto ha fallado.

• The username/password was not properly configured on the WHSE router. • El nombre de usuario / contraseña no se ha configurado correctamente en el router WHSE.

The remote router has a different authentication protocol configured. El router remoto tiene un protocolo de autenticación configurado diferentes.

29. 29. What does the output of the show frame-relay map command shown below represent? ¿Qué significa la salida del comando show frame-relay map se muestra a continuación representa? (Choose two.) (Elija dos.)

Serial 0 (up): ip 172.30.151.4 dlci 122, dynamic, broadcast, status defined, active Serie 0 (hasta): IP 172.30.151.4 DLCI 122, de difusión dinámica, situación definida, activa

• 172.30.151.4 represents the IP address of the remote router. • 172.30.151.4 representa la dirección IP del router remoto.

172.30.151.4 represents the IP address of the local serial interface. 172.30.151.4 representa la dirección IP de la interfaz de serie local.

DLCI 122 represents the interface of the remote router. DLCI 122 representa la interfaz del router remoto.

broadcast indicates that a dynamic routing protocol such as RIP v1 can send packets across this PVC. difusión indica que un protocolo de enrutamiento dinámico como RIP v1 puede enviar paquetes a través de este PVC.

• dynamic indicates that a dynamic routing protocol is enabled for this connection. • dinámica indica que un protocolo de enrutamiento dinámico está habilitado para esta conexión.

active indicates that the ARP process is working. activa indica que el proceso ARP está funcionando.

Page 14: CCNA 4 V4 Exploración del examen final 100

30. 30. What does the status inactive indicate in the output of the show frame-relay pvc command? ¿Qué significa el estado de inactividad indicar en la salida del comando show frame-relay pvc?

• The DLCI is programmed in the switch but is not usable. • El DLCI está programado en el interruptor, pero no es utilizable.

The DLCI was formerly programmed in the switch but is no longer there. El DLCI fue programado antes en el interruptor, pero ya no está allí.

The DLCI is usable but has little activity. El DLCI se puede utilizar, pero tiene poca actividad.

The DLCI has been renamed for that PVC. El DLCI se ha cambiado el nombre para que el PVC.

31. 31. Which of the following IP addresses are defined by RFC 1918 as private addresses? ¿Cuál de las siguientes direcciones IP son definidos por la RFC 1918 como direcciones privadas? (Choose three.) (Elija tres.)

• 192.168.146.0/22 • 192.168.146.0/22

172.10.25.0/16 172.10.25.0/16

• 172.31.0.0/16 • 172.31.0.0/16

20.0.0.0/8 20.0.0.0 / 8

• 10.172.92.8/29 • 10.172.92.8/29

32. 32. After configuring a dialup ISDN circuit, a network associate begins testing the dialup connection. Después de configurar un circuito RDSI de acceso telefónico, un asociado de la red comienza a probar la conexión de acceso telefónico. When attempting to ping a host on the remote network, the local router does not attempt to dial the remote access server. Al intentar hacer ping a un host en la red remota, el router local no intenta marcar el servidor de acceso remoto. Which of the following are possible errors in this configuration? ¿Cuál de los siguientes posibles errores en esta configuración? (Choose three.) (Elija tres.)

PPP authentication is not properly configured. autenticación PPP no está correctamente configurado.

• No dialer map is configured. • Ningún mapa marcador está configurado.

The ISDN circuit connected to the remote access server is busy. El circuito RDSI conectado al servidor de acceso remoto está ocupado.

Page 15: CCNA 4 V4 Exploración del examen final 100

• No interesting traffic is defined. • No se define el tráfico interesante.

No route is determined to the remote network. Ninguna ruta se determina a la red remota.

• A wrong number is configured in the dial string. • Un número equivocado está configurado en la cadena de marcado.

33. 33. Two routers are connected through a Frame Relay, point-to-point PVC. Dos enrutadores están conectados a través de un Frame Relay, punto a punto de PVC. The remote router is from a vendor other than Cisco. El router remoto es de un proveedor que no sean de Cisco. Which interface command is required to configure the link between the Cisco router and the other router? ¿Qué comando de interfaz es necesario para configurar el enlace entre el router Cisco y el otro router?

frame-relay pvc multipoint multipunto frame-relay pvc

frame-relay pvc point-to-point frame-relay pvc punto a punto

encapsulation frame-relay cisco encapsulation frame-relay cisco

• encapsulation frame-relay ietf encapsulación • frame relay ietf

frame-relay lmi-type ansi ansi lmi-tipo frame relay

34. 34. Which circuit-switched WAN technology is often used to provide a backup for a leased line and additional capacity during peak usage times? ¿Cuál de conmutación de circuitos WAN tecnología se utiliza a menudo para proporcionar una copia de seguridad de una línea dedicada y la capacidad adicional durante las horas pico de uso?

X.25 X.25

DSL DSL

ISDN RDSI

cable modem cable de módem

35. 35. After the ISDN BRI interface is configured, which command can be used to verify that the router is communicating correctly with the ISDN switch? Después de la interfaz ISDN BRI está configurado, que comando se puede utilizar para verificar que el router se está comunicando correctamente con el switch RDSI?

show dialer mostrar el marcador

Page 16: CCNA 4 V4 Exploración del examen final 100

show isdn status mostrar el estado de RDSI

• show interfaces bri0/0:1 • Mostrar interfaces bri0 / 0:1

show interfaces serial0/0.1 show interfaces serial0/0.1

36. 36. A system administrator needs to configure the regional office with ISDN for DDR connections to three remote sites. Un administrador de sistemas necesita configurar la oficina regional con RDSI para conexiones DDR con tres sitios remotos. Each remote site requires different IP subnets, different encapsulations, and different authentication methods. Cada sitio remoto requiere distintas subredes IP, encapsulados diferentes, y diferentes métodos de autenticación. The sites will not be connected at the same time. Los sitios no estarán conectados al mismo tiempo. The company would like to accomplish this in the most cost effective manner. La empresa quiere lograr esto de la manera más rentable. What method can the system administrator use to accomplish this task using the fewest B channels? ¿Qué método se puede usar el administrador del sistema para realizar esta tarea utilizando la menor cantidad de canales B?

Install and configure a PRI. Instalar y configurar un PRI.

Install and configure a BRI interface with separate SPIDs for each remote site. Instalar y configurar una interfaz BRI con SPID para cada sitio remoto.

Install and configure a BRI with multiple switch types in global configuration. Instalar y configurar un BRI con tipos de cambio múltiples en configuración global.

• Install and configure a BRI using dialer profiles. • Instalar y configurar un BRI utilizando perfiles de marcador.

Install and configure a separate BRI for each remote site. Instalar y configurar un BRI separados para cada sitio remoto.

37. 37. A system administrator must provide Internet connectivity for ten hosts in a small remote office. Un administrador del sistema debe proporcionar conectividad a Internet para los hosts de diez en una pequeña oficina remota. The ISP has assigned two public IP addresses to this remote office. El ISP ha asignado dos direcciones IP públicas a esta oficina a distancia. How can the system administrator configure the router to provide Internet access to all ten users at the same time? ¿Cómo puede el administrador del sistema configurar el router para proporcionar acceso a Internet a todos los diez usuarios al mismo tiempo?

Configure static NAT for all ten users. Configurar NAT estático para todos los usuarios diez.

• Configure dynamic NAT for ten users. • Configurar NAT dinámico para los diez usuarios.

Page 17: CCNA 4 V4 Exploración del examen final 100

Configure dynamic NAT with PAT. Configurar NAT dinámico con PAT.

Configure DHCP and static NAT. Configurar DHCP y NAT estática.

What the administrator wants to do cannot be done. Lo que el administrador desea que no se puede hacer.

38. 38. Which of the following are characteristics of Frame Relay? ¿Cuál de las siguientes son características de Frame Relay? (Choose two.) (Elija dos.)

circuit-switched conmutación de circuitos

• connection oriented • orientado a la conexión

OSI Layer 3 OSI Layer 3

• packet-switched • paquetes de conmutación de

reliable confiable

39. 39. Which of the following is the order for the three phases of establishing a PPP serial link with authentication? ¿Cuál de los siguientes es el orden de las tres fases de establecer un enlace PPP serial con autenticación?

authentication, link-establishment, network layer protocols autenticación, establecimiento del enlace, los protocolos de la capa de red

authentication, network layer protocols, link-establishment autenticación, protocolos de capa de red, el establecimiento de enlaces

network layer protocols, link-establishment, authentication protocolos de la capa de red, establecimiento del enlace, autenticación

network layer protocols, authentication, link-establishment protocolos de la capa de red, la autenticación, el establecimiento de enlaces

• link-establishment, authentication, network layer protocols • establecimiento de enlaces, la autenticación, protocolos de capa de red

link-establishment, network layer protocols, authentication establecimiento de enlaces, los protocolos de capa de red, la autenticación

Page 18: CCNA 4 V4 Exploración del examen final 100