catalogus 2010 engels
TRANSCRIPT
built stronger to last longer
catalogue 2010
2
Brouwers is a leading Dutch designer and manufacturer of high-quality livestock housing systems, which are widely used in all stock farming sec-tors. Its structural innovation has resulted in a large number of patented products with unique characteristics.
ExperienceBrouwers Equipment was founded in 1919 and has quickly developed into the specialist in equipment for housing livestock. Brouwers is working cooperatively with stock breeders, researchers, governmental agencies and scientific centres. Through the company’s longstanding commitment to the sector and its excellend record in product development, Brouwers is het complete outfitter for the forward-looking stockbreeder.
Research and DevelopmentBrouwers allocates a substantial part of its budget to Research and Development. New designs are thorougly put to the test at pilot farms. Independant researchers are called on to perfect designs. In all this the user of our products is always essential.
Critical stock farmersIn addition to breeding the most awarded cattle in the world, the Dutch have built up a reputation for excellence in the field of innovation in stock breeding and the resultant introduction of new products and techniques. A measure of the company’s product quality are the orders received from Dutch farmers who settled abroad.
Growing share in the world marketBrouwers operates on the basis of an extensive dealer network. Maxi-mum service and good advise are key words in our vocabulary. For effici-ency reasons, products are manufactured in series. Deliveries are usually made from stock, so that our customers can be served fast.
We are open from Monday through Friday from 8.00 - 12.00 h and 12.30 - 16.30 h. You are always welcome for a visit to our company. Also outside office hours we will be glad of service to you.
Sales Department External Area Sales Managers Direct dial no.North-West Netherlands Klaes Gerbrandy 0031-651-349729North-East Netherlands Ap van der Bas 0031-651-349732South Netherlands Robert Couperus 0031-651-852021Germany Jan Roost 0049-1608-459684Denmark, Norway, Sweden, Finland
Marcel Groot Boerle 0045-218-251890031-646-721231
Sales Department Internal Project ManagersNetherlands Jan Steensma 0031-58-2911120Netherlands Edwin Pot 0031-58-2911160Germany, other countries Frans Nauta 0031-58-2911150Parts Netherlands, export Cor de Vries 0031-58-2911161
Sales Department
Tel. 0031-58-2911129
21-05-2010Company profile
Frans Nauta, Edwin Pot, Cor de Vries, Jan Steensma
Klaes Gerbrandy Ap van der Bas Robert Couperus Jan RoostMarcel Groot Boerle
Preface
3
Brouwers Equipment B.V.Address : Vestaweg 5, 8938 AV Leeuwarden, HollandMail : Postbus 203, 8901 BA Leeuwarden, HollandTel. : +31 (0)58 - 2911129Fax : +31 (0)58 - 2911100
Internet : www.brouwersequipment.comE-mail : [email protected]
Postbank : 83.20.02ING bank : 67.02.22.305IBAN : NL48INGB0670222305BIC : INGBNL2A
VAT nr. : NL810809400B01CoC nr. : 01046043
www.brouwersequipment.com
01-05-2010
Growing biggerScaling-up and cost price reduction are the important issues on today’s agenda. Because the milk price is under pressure, something has to be done. Companies become more professional, production means are being used increasingly intensive and redundant luxury is dropped.
In this respect it is very important to make the right decisions as investments are being made for the long term. Production means should therefore be designed for long-lasting and intensive use, in the course of which a good bargain could soon become a pickpurse.
This is no different for livestock equipment. Large buildings, in which the cows stay year-round, demand a lot from the inventory. In this respect quality will pay off and be translated to “no more looking after”.
That is why Brouwers Equipment delivers livestock equipment of the highest quality standard, so you don’t have to worry about that anymore!
Address
The cantilever model-R cubicle partitions for large stock are made from 2” tubing (ø 60,3 mm, wall thickness 3,65 mm). The large head opening from the bedding allows the animals to stand up a great deal easier. The shape of the partition provides support and guidance to the animals allowing them to lie straight in the cubicles. This in turn makes for cleaner cubicles.
New!The cubicle partitions for large stock are higher, which gives your dairy cows even more space.
The advantages in a rowLarge head opening. The cows stand up easily. Excellent guidance. The animals lie straight in the cubicle. Hygienic. Very comfortable. Extra heavy tubing. Hot-dip galvanised.
Wilaard conditionsAll our offers, all orders to us and all contracts entered into with us are subject to the Wilaard terms and conditions. We also declare the law of the Netherlands to be applicable. The Wilaard terms and conditions contain an arbitration clause and a limitation of liability. The terms and conditions are on file with the Chamber of Commerce in Leeuwarden, under number 01067746. A copy is available free of charge on request.
GeneralAll rights reserved. No part of this publication may be reproduced. Exclusi-vely current and new materials may, subject to our explicit permission, be returned free of charge; handling costs will be charged. Complaints about goods deliverd must be submitted within 14 days from date of invoice.
PricesExclusive of VAT. Prices, as well as designs are subject to alteration without notice.
DeliveriesThe cost of freight to foreign countries depend on the invoice value and dstination. A survey can be sent on demand.
Payment14 days from date of invoice. Unknown clients on submission of referen-ces or collect on delivery.
Index
Terms of delivery and payment
Tel. 0031-58-29111294
Cantilever model-R cubicles ................5Space Tube ..........................................6R-flex ....................................................6Brisket concrete cubicle concept .........7Model-R cubicle partitions ....................8Cantilever cubicle partitions .................9Accessories for cubicle partitions .......10Tube clamps .......................................12Cubicle floor covering ........................14Locks® feed barriers ..........................16Classic Locks .....................................18Feed barriers for young stock ............19Swedisch feed barriers ......................20Diagonal bar feed barriers .................21Feed barriers for fattening stock ........22Accessories for feed barriers .............23Grouping area barriers .......................23Housing systems for horses ...............26Calf pens ............................................27Partitions for tying stalls .....................28Suspended chains and nylon ties ......29Water troughs .....................................30Spare parts for drinking bowls ...........32Drinking bowls ....................................33Grid scraper system ...........................34Folding scrapers ................................36Rubber flooring for walking alleys ......38Auger mixers ......................................39Submersible agitators ........................40Vertical pumps ...................................42Lobe rotor pumps ...............................43Electric pumps ...................................44Biogas installations ............................45Fastening items ..................................46E-brush® ............................................47Cattle crush ........................................47Livestock care ....................................48E-fan ..................................................50Ventilation ..........................................51
The information in this catalogue is only apicture at a given moment in time. As we are continuously busy with new developments, you can find the complete catalogue digitally on our website www.brouwersequipment.com. We keep this digital catalogue up-to-date, so you can always check this site for the correct and latest information.
01-05-2010
Cubicle partitions Model2” cubicle partition with mounting plate
dim. 115 x 200 cmdim. 115 x 190 cm
5510-8535-0195510-8535-016
2” cubicle partition, dim. 100 x 170 cm 5510-8535-000Support postsSupport post 2½”
with PVC sleeve, length 148 cmwith foot plate, length 129 cm
5510-8548-0005510-8549-004
Allignment plate with 4 anchors M12 and protective caps (1 per support post with foot plate) 5510-8567-002Concrete anchor M12 x 111 (3 per support post with foot plate)
5580-1219-009Clamps and tubingTee-clamp, cast iron, 2” x 2” 5510-1250-000Cross clamp 2” x 2” (double row) 5510-1966-001Cross clamp, cast iron 5510-1252-000Tee-clamp 2” x 2” 5500-9618-002Clamp with spacer 2” x 1½” 5510-9625-002Cross clamp 2½” x 2” 5510-9629-006Meter tube 2” 5510-6040-001Meter tube 1½” with thread and socket 5510-8511-003Adjustable knee retainerAdjustable knee bar support (1 per partition)
1½”2”
5510-7112-0015510-7112-002
Adjustable knee board support (1 per partition) 5510-7112-005
Measurements cantilever model-R cubicle partitions5510-8535-019 5510-8535-016 5510-8535-000
A 120 cm 120 cm 100 cmB 200 cm 190 cm 170 cmC 25 cm 25 cm 20 cmD 50 - 60 cm 50 - 60 cm 45 cmE 221 cm 211 cm 186 cmF 230-240 cm 220-230 cm 200 cm
Requirements model-R cubicle partitons> 18 months Model NumberSingle row 5510-8535-016
5510-8549-0045510-8567-0025510-1250-0005500-9618-0025510-9629-0065510-6040-0015510-8511-003
1 per stand1 per 2 stands and 1 per row1 per support post1 per partition1 per partition2 per support post2,2 - 2,4 m per stand1,1 - 1,2 m per stand
Double row 5510-8535-0165510-8549-0045510-8567-0025510-1966-0015510-1252-0005510-9629-0065510-6040-0015510-8511-003
1 per stand1 per 4 stands and 1 per row1 per support post1 per 2 partitions1 per 2 partitions1 per support post2,2 - 2,4 m per stand1,1 - 1,2 m per stand
12-18 monthsSingle row 5510-8535-000
5510-8549-0045510-8567-0025500-9618-0025510-9625-0025510-9629-0065510-6040-0015510-8511-003
1 per stand1 per 2½ stands and 1 per row1 per support post2 per partition1 per partition2 per support post1,8 - 2,0 m per stand0,9 - 1,0 m per stand
Cantilever model-R cubicle partitions
www.brouwersequipment.com 5
A
B C
D
E
F
01-05-2010
New!Leaves room in your budget for other things and even more important, gives you dairy cattle space. At the front the cows have so much space as if they were lying in the pasture. Because the partition has a horizontal part underneath, it ensures a clear guiding effect.
Space Tube ModelSpace Tube cubicle partition for cubicle beds with a length of 230 cm and a width of 115-125 cm, extra high model, 127 cm underneath the shoulder bar
with mounting platewithout mounting plate
5510-8539-0245510-8539-008
Space Tube cubicle partition for short cubicle beds of 220 cmwith mounting plate
without mounting plate 5510-8539-0205510-8539-007
Space Tube cubicle partition for fitting to horizontal tubesmet montageplaat, 107 x 190 cm
zonder montageplaat, 107 x 190 cmmet montageplaat, 107 x 200 cm
zonder montageplaat, 107 x 200 cm
5510-8539-0115510-8539-0005510-8539-0135510-8539-001
Clamps and tubingMounting clamp 2” with 4 holes 5510-9629-000Mounting clamp 2” with 2 holes 6630-9630-003Clamp with seperate spacer 2” x 1½” 5510-9625-002Tee-clamp 2” x 2” 5500-9618-002Cross clamp (double row) 2” x 2” 5510-1966-001Meter 1½” tube with thread and socket 5510-8511-003Meter 2” tube with thread and socket 5589-2000-015Middle clamping plate for double rows from 480-500 cm 5510-8539-029Support posts and accessoriesSupport post 2½”
with PVC sleeve, length 165 cmwith foot plate, length 145 cm
5530-7801-0005510-8549-005
Concrete anchor M12 x 111 5580-1219-009Cross clamp (double row) 2½” x 2” 5510-1231-002Tee-clamp 2½” x 2” 5510-9618-000Cross clamp 2½” x 2” 5510-9629-006Meter 2” tube 5510-6040-001AccessoriesAdjustable knee bar support 5510-7110-004Meter of nylon band 5580-2019-000Clamping plate 2” for nylon band incl. threaded straps
middleend
5510-8512-0165510-8512-017
Knee bars see page 11
Space Tube
6 Tel. 0031-58-2911129
229,5
127200-215
205
230
220
175
18
117
192
01-05-2010
195 25
The importance of the well-being of cows is getting more and more clear. The positive effects will not only increase the health, but also the results. The most important feature required from the “ironwork” on the cubicles is that the cows are being guided as good as possible. In such a way that they will lie down properly next to each other “like cigars in a box”. And preferably with their behind slightly over the rear edge. Furthermore we would like to offer the animals freedom as much as possible. Especially towards the front there should not be any obstacles. And not too expen-sive please. The brisket concrete cubicle concept intends to satisfy those demands by letting the floor and the cubicle partition work together.
By applying the brisket concrete elements a rounded cow-friendly thres-hold will prevent cows from sliding too much to the front. As the concrete elements are completely closed, it will not be a breeding place for bacteria as a result of saliva. The co-operation between the brisket concrete and the cubicle partition can also be found in the fact that the reised concrete is an ideal foundation for the ironwork. As a result of this the support posts and mounting tubes, which are commonly used to fasten the cubicle partitions, are no longer needed. On the one hand this results in a price advantage, because we need less tubing, on the other hand the cows now get a completely free headspace, as in a pasture.
The cantilever R-cubicle partition, known and praised for its excellent stee-ring and the straight lying position of the cows, now bent from one piece and equipped with an animal-friendly nylon band. To the front this partition is fully open, so the cows can freely stand up and lie down. To the side the partition is closed, so the cows will lie straight. And ... flexible: the partition that follows the cow when lying down and standing up. As an option it can be equipped with a high knee board.
R-Flex ModelCubicle partition with 1 vertical hole for direct mounting on concrete
length 195 cmlength 205 cm
5510-8535-0115510-8535-002
2” clamp with 4 holes diameter 14 mm 5510-9629-0002” clamp with 2 holes 5530-9630-0032” tube with thread and socket, on lengths of 6 meters, per meter
5589-2000-015T-clamp 2” x 2” with 2 bolts 5500-9618-002Meter of nylonband 5580-2019-000Clamping plate (middle) incl. 2” threaded straps 5510-8512-016Clamping plate (end) incl. 2” threaded straps (2 per row) 5510-8512-017Concrete anchor M12 x 111 5580-1219-009ExtrasCross clamp for retaining bar 2” x 1½ 5510-9618-010Meter of 1½” tube with thread and socket 5510-8511-003Knee bar support 5510-7109-003Concrete anchor M10 x 90 5580-1219-000Meter of hardwood 205 x 33 mm, rounded 5580-3300-001
R-flex
Brisket concrete cubicle concept
7www.brouwersequipment.com
Partition ModelCubicle partition, with 1 vertical hole for direct mounting on concrete
length 195 cmlength 205 cm
5510-8538-0025510-8538-003
2” clamp with 4 holes diameter 14 mm 5510-9629-0002” tube with thread and socket, on lengths of 6 meters, per meter 5589-2000-015T-clamp 2” x 2” with 2 bolts 5500-9618-002Meter of nylonband 5580-2019-000Clamping plate (middle) incl. 2” threaded straps 5510-8512-016Clamping plate (end) incl. 2” threaded straps (2 per row) 5510-8512-017Accessories brisket concreteConcrete threaded achor M12 x 111 5580-1219-009Anchor bolt M12, with nut (to be used in formwork if so desired) 5510-8566-002Template with 8 anchors to be placed during casting 5510-8538-040
01-05-2010
Model-R cubicle partitions
8 Tel. 0031-58-2911129
The model-R cubicle partitions are suitable for the heaviest cows and they are supplied with a large head opening. The rear leg is placed far towards the front, minimising the risk of corrosion through the action of manure. The model-R cubicle partitions have a foot plate with holes in triangular arrangement for extra stability. European patent number 0057490.
The cubicle partitions for large stock are made from 2” tubing (ø 60,3 mm, wall thickness 3,65 mm). The mounting plate is mounted with use of threaded straps, which makes the shoulder bar adjustable. With cross holes for fitting to hori-zontal tubes or support posts.
New!The cubicle partitions for large stock are higher, which gives your dairy cows even more space.
Model-R cubicle partitions ModelModel-R cubicle partition
entirely 2”, dim. 110 x 190 cmdim. 110 x 190 cm
for short stand, dim. 117 x 185 cmdim. 103 x 180 cmdim. 95 x 165 cm
new model, dim. 75 x 135 cm
5510-8530-0055510-8530-0045510-8530-0035510-8530-0025510-8530-0015510-8530-000
AccessoriesConcrete threaded anchor
M12 x 78M12 x 111
5580-1219-0025580-1219-009
Cross clamp 1½” x 1½” 5510-9622-001Meter of 1½” tube, with coupling 5510-5065-000Feed cubicle partitionFeed cubicle partition with foot plate and straight front leg
5510-3199-000Neck bow for 105 - 120 cm from centre to centre 5510-3091-000Tube clamp 57 mm x 48 mm 5510-9624-003
Requirements model-R cubicle partitions> 22 months Model Number
5510-8530-0045580-1219-0025510-9622-0015510-6065-000
1 per stand3 per partition2 per partition2,2 - 2,4 m per stand
15-22 months5510-8530-0025580-1219-0025510-9622-0015510-6065-000
1 per stand3 per partition2 per partition2,0 - 2,2 m per stand
12-15 months5510-8530-0015580-1219-0025510-9622-0015510-6065-000
1 per stand3 per partition2 per partition1,8 - 2,0 m per stand
5-12 months5510-8530-0015580-1219-0025510-9622-0015510-6065-000
1 per stand3 per partition2 per partition1,6 - 1,8 m per stand
2-6 months5510-8530-0005580-1219-0025510-9622-0015510-6065-000
1 per stand3 per partition2 per partition1,4 - 1,6 m per stand
Feed cubicle partition5510-3199-0005510-3091-0005580-1219-0095510-9622-001
1 per stand1 per stand3 per partition2 per partition
Measurements model-R cubicle partitions5510- 8530-004 8530-002 8530-001 8530-000 3199-000A 190 cm 180 cm 165 cm 135 cm 155 cmB 25 cn 22 cm 8 cm 14 cm 20 - 30 cmC 110 cm 103 cm 95 cm 75 cm 100 cmD 80 cm 75 cm 60 cm 50 cm not applicable.E 50 - 60 cm 50 cm 40 cm 30 cm 50 - 60 cmF 115 cm 107 cm 90 cm 80 cm 110 - 120 cmG 220 cm 210 cm 180 cm 160 cm 165 - 180 cm
B A
C
D
E
F
G
5510-8530-000
01-05-2010
New!
Cantilever cubicle partitions
9www.brouwersequipment.com
Cantilever cubicle partitions ModelCubicle partition 2”, with mounting plate
dim. 100 x 200 cmcim. 100 x 190 cm
(short stand) dim. 90 x 180 cmdim. 80 x 170 cm
5510-8538-0285510-8538-0265510-8538-0195510-8538-017
Cubicle partition 2”, without mounting platedim. 100 x 200 cmdim. 100 x 190 cm
(short stand) dim. 90 x 180 cmdim. 80 x 170 cm
5510-8538-0055510-8538-0045510-8538-0015510-8538-000
Cantilver cubicle partitiondim. 70 x 155 cmdim. 57 x 130 cm
5510-3316-0005510-3313-000
Support postsSupport post 2½
with PVC sleeve, length 148 cmwith foot plate, length 129 cm
5510-8548-0005510-8549-004
Support post 2”, with foot plate, length 125 cm 5510-8549-001
Support post 1½”, with foot plate, length 85 cm 5510-8549-006
Alignment template with 4 anchors M12 and protective caps (1 per support post with foot plate) 5510-8567-002
Concrete anchor M12 x 111 (3 per post with cast-in foot) 5580-1219-009
Clamps and tubingTee-clamp 1½” x 1½” 5510-1230-007
Cross clamp (double row)2” x 2”
2½” x 2”5510-1966-0015510-1231-002
Tee-clamp2” x 2”
2½” x 2”5500-9618-0025510-9618-000
Heavy-duty corner clamp incl. threaded straps 5510-9619-001
Cross clamp 1½” x 1½” 5510-9622-001
Cross clamp 2½” x 1½” 5510-9623-002
Clamp with seperate spacer 2” x 1½” 5510-9625-002
Cross clamp 2½” x 2” 5510-9629-006
Meter of 2” tube 5510-6040-001
Meter of 1½” tube with thread and socket 5510-8511-003
AccessoriesAdjustable knee bar support 5510-7110-004
Meter of nylon band 5580-2019-000
Clamping plate for nylon band incl. threaded strapscentre, 1½”centre, 2”centre, 2½”
end, 1½”end, 2”
5510-8512-0145510-8512-0165510-8512-0185510-8512-0155510-8512-017
Requirements cantilever cubicle partitions> 18 months Model Number
5510-8538-0265510-8549-0045510-8567-0025500-9618-0025510-9629-0065510-6040-0015510-8511-003
1 per stand1 per 2 stands and 1 per row1 per support post2 per partition2 per support post2,2 - 2,4 m per stand1,1 - 1,2 m per stand
12-18 months5510-8538-0175510-8549-0045510-8567-0025500-9618-0025510-9625-0025510-9629-0065510-6040-0015510-8511-003
1 per stand1 per 2½ stands and 1 per row1 per support post2 per partition1 per partition2 per support post1,8 - 2,0 m per stand0,9 - 1,0 m per stand
5-12 months5510-3316-0005510-8549-0045510-8567-0025510-1230-0075510-9622-0015510-9623-0025510-8511-003
1 per stand1 per 3 stands1 per support post2 per partition1 per partition2 per support post2,4 - 2,7 m per stand
2-6 months5510-3313-0005510-8549-0065510-8567-0025510-1230-0075510-9622-0015510-8511-003
1 per stand1 per 3 stands1 per support post2 per partition1 per partition and 1 per support post2,1 - 2,4 m per stand
Measurements cantilever cubicle partitions (in cm)5510- 8538-005 8538-004 8538-001 8538-000 3316-000 3313-000A 120 120 110 100 100 80B 200 190 180 170 155 135C 25 25 25 20 15 15D 50 - 60 50 - 60 50 - 60 45E 20 20 20 20 25 20F 221 211 201 186 167 147G 220 - 230 210 - 220 210 - 220 200 180 160
A
B C
D
E
F
G
01-05-2010
5510-8512-014 5510-8512-017 5510-3316-000 / 5510-3313-000
Fittings for cubicle partitions
10 Tel. 0031-58-2911129
Stoppers ModelPVCU tube stopper
1½”2”
2½”3”
5580-8007-0005500-8007-0025500-8007-0005500-8007-001
Fitting retaining boardAngle foot plaat, dim. L x W x H = 10 x 5 x 13 cm
without fittingsincl. croncrete anchor and nut bolt
5550-5201-0005510-8565-001
Accessories for fitting tubesBowl-shaped fastener for fitting shoulder bar and retaining bar to end walls and trusses
1½”, incl. nut bolt 8 x 702”, incl. nut bolt 8 x 80
5510-7107-0025510-7107-004
End coupler 1½”, length 52 cm, for flexible fitting of shoulder bar to end walls
without clampincl. clamp 9622
5510-8885-0005510-8885-003
Foot for fixing tube to wallfor 1½” tubefor 2” tube
5550-4285-0005550-4285-001
Set of 2 adapters for fitting nos bar to truss leg, without threaded straps and bolts
size A = 6,5 cmsize A = 10,0 cmsize A = 14,0 cm
5510-8887-0035510-8887-0055510-8887-007
Threaded strap, hot dip galvanisedM12 x 82 mm (1½” tube)M12 x 95 mm (2” tube)
5540-9660-0035540-9660-005
Heightening shoulder barHeightening shoulder bar complete
25,0 cm, 1½”17,5 cm, 2”
incl. clamp 9625, 17,5 cm, 2”
5510-8515-0045513-8515-0015510-8515-005
Shoulder bar and retaining bar ModelShoulder bar and retaining bar 1½”, with smooth ends, incl. couplers, lengths of 6 meters, per meter 5510-6065-000Retaining bar 2”, with smooth ends, lengths of 6 meters, per meter 5510-6040-001Retaining bar 1½”, with thread and socket, lengths of 6 meters, per meter 5510-8511-003Neck bar 2” with thread and socket 5589-2000-015Support postsCement-in support post with stopper and PVCU sleeve
2”, length 148 cm2½”, length 148 cm
3”, length 195 cm
5510-8548-0015510-8548-0005530-7801-003
Floor-mounted support post with stopper and foot plate1½”, length 85 cm
2”, length 125 cm2½”, length 129 cm
5510-8549-0065510-8549-0015510-8549-004
Alignment template with 4 anchors M12 and 4 protective caps (1 per support post) 5510-8567-002Floor-mounted support post 2½” (76 mm ø), with cap and cast-in foot 24 x 18 x 9 cm, length 107 cm, with 3 holes M12 5510-8550-000Floor-mounted support post 2½” (76 mm ø) with foot plate and shore, length 150 cm, with 3 holes 5530-7824-001Galvanised concrete threaded anchor with nut, M12 x 111 (3 per support post) 5580-1219-009
01-05-2010
5550-5201 5510-7107 5550-4285 5510-8885
5510-8887
A
5510-6065-000 5510-8511-003
5510-8548 5510-8549 5510-8550
5510-8515
Accessories for cubicle partitions
www.brouwersequipment.com 11
In order to increase the well-being of cows, there are several accesso-ries available. The synthetic partition wall is particularly suited to serve as an end wall in a row of cubicles. Thus, drafts in the first stands can be drastically reduced and also when the cubicles are situated next to a water reservoir the beddings keep perfectly dry. With its smooth finish, the synthetic wall can be cleaned adequately and fast. This synthetic material is resistant to slurry and moisture. When using stand retainers the cows will lie down in the right way. This will increase comfort and hygiene.
Synthetic partition wall ModelComplete synthetic end wall for single row, consisting of: 6 boards, 2 clamping strips, 2 single U-sections, 2 mounting clamps, 4 bolts and 1 tube
cast-infloor-mounted
5510-8888-0255510-8888-026
Complete synthetic end wall for double row, consisting of: 12 boards, 4 clamping strips, 2 single U-sections, 1 double U-section, 4 mounting clamps, 8 bolts and 2 tubes
cast-infloor-mounted
5510-8888-0235510-8888-024
Grey double-walled synthetic board with groove and tongue, covered width 20 cm, 4 cm thick, length 230 cm 5550-1932-000PVC clamping strip, length 120 cm, colour black 5550-1932-001Mounting clamp for 1½” tube 5530-9630-002Hexagon-head bolt M12 x 80 mm 5500-1210-100Tube 1½”, length 240 cm 5510-8510-006U-section for fitting the synthetic partition wall
cast-in double, length 149 cmcast-in single, length 149 cm
floor-mounted double, length 120 cmfloor-mounted single left, length 120 cm
floor-mounted single right, length 120 cm
5510-8886-0215510-8886-0155510-8886-0185510-8886-0195510-8886-020 Rear edge retainer for cubicle partitions Model
Rear edge retainer, hot dip galvanised, incl. couplers and rubber end piece, per length of 250 cm 5510-7180-003Cover plate for rear edge retainer (required when using cubicle foor covering), per length of 250 cm 5510-7181-001Concrete threaded anchor bolt M12 x 78 mm (5 per plate) 5580-1219-002Rear tube - knee barSupport for fitting rear bar
(1 per box) for 1½” tube(1 per 2 boxes) for 2” tube(1 per 3 boxes) for 2½” tube
5510-7108-0005510-7108-0035510-7108-001
Support for fitting knee bar, for 1½” tube (1 per box)5510-7109-001
Retaining bar with thread and socket, in lengths of 6 meters1½”, per meter
2”, per meter2½”, per meter
5510-8511-0035589-2000-0155589-8511-001
Adjustable knee retainerAdjustable knee bar support, incl. mounting clamps (1 per partition)
for use with cubicle partitions 8538, 1½“for use with cubicle partitions 8538, 2”for use with cubicle partitions 8535, 1½”for use with cubicle partitions 8535, 2”
5510-7110-0005510-7110-0015510-7112-0015510-7112-002
Meter of 2” mounting tube with two-part clamp coupling (1,1 meters per partition) 5510-6040-001Adjustable knee board support
for cubicle partitions 8538for cubicle partitions 8535
5510-7110-0045510-7112-005
Meter of hardwood 205 x 33 mm, rounded 5580-3300-001Polyround knee barKnee bar Polyround, length 290 cm (effective length 284 cm), height 15 cm, width 24 cm 5550-0506-000Screw / hammer plug, length 80 mm, with 8 mm plug (20 per length of knee bar) 5520-0503-005Polyethylene knee barKnee bar ø 110 mm, length 600cm 5510-3511-001Coupling tube, length 25 cm 5510-7111-001Mounting set to end wall 5510-7111-005Centre part for fitting to 8539.ST 5510-7111-006End hood for polyethylene knee bar 5510-7111-007
Rear edge retainer
170-180
Rear tube Knee bar
Knee bar support
Knee bar Knee board
01-05-2010
Polyethylene knee bar
Polyround knee bar
New!
5550-1932-0015510-8510-006
5550-1932-000 5510-9622-0015530-9630-002
5530-9630-002
5510-8886-015
5510-8886-019 5510-8886-018 5510-8886-020
Description Dimensions Model
Tee-clamp cast iron 2” x 2” 5510-1250-000
Cross clamp cast iron 2” x 2” 5510-1252-000
Double locking clamp1½”
2”5510-3450-0005510-3450-001
Single locking clamp1½”
2”5510-3455-0005510-3455-001
Cross clamp
2” x 1½”3” x 1½”3” x 2”
3½” x 1½”3½” x 2”
5510-9616-0005510-9616-0015510-9616-0025510-9616-0035510-9616-004
Tee-clamp
1½” x 1½”1½” x 2”
2” x 1½”2” x 2”
2½” x 2”
5510-9618-0065510-9618-0085510-9618-0105500-9618-0025510-9618-000
12 Tel. 0031-58-2911129
Tube clamps
Description Dimensions Model
Tee-clamp with 1 bolt
½” x ½”¾” x ¾”1” x 1”
1¼” x 1”1¼” x 1¼”1½” x 1”1½” x 1¼”1½” x 1½”1½” x 2”
2” x 1½”2” x 2”
5510-1230-0005510-1230-0015510-1230-0025510-1230-0035510-1230-0045510-1230-0055510-1230-0065510-1230-0075510-1230-0085510-1230-0095510-1230-010
Tee-clamp with 2 bolts 2½” x 1½” 5510-1230-011
Cross clamp with 2 bolts
1½” x 1¼” x 1½”1½” x 1½” x 1½”
2” x 1½” x 1½”2” x 2” x 2”
2½” x 2” x 2”
5510-1945-0015510-1231-0055510-1231-0065510-1966-0015510-1231-002
Cross clamp with 4 bolts 2½” x 1½” x 1½”2½” x 2” x 2”
5510-1231-0015510-1231-003
Three-way clamp 1½”x1¼”x1¼”x1¼ 5510-1232-000Corner clamp (not shown) 1½”x 1¼”x 1½” 5510-1233-000
Two-piece clamp coupling with car-riage bolt
1½2”
5510-1235-0005510-6031-004
Tee-clamp with 2 bolts
1¼” x 1¼”1½” x 1½”
2” x 1½”
5510-1245-0005510-1245-0025510-1245-004
Brouwers delivers a wide range of tube clamps for the fitting of tubes. We have the right clamp for every situation available. In the descripti-on the size of the vertical (standing) tube is mentioned first and then the size of the horizontal (lying) tube.
Tube diameters ¾” ( 27 mm) 1” ( 34 mm)1¼” ( 42 mm)1½” ( 48 mm) 2” ( 60 mm)2½” ( 76 mm) 3” ( 89 mm)3½” (101 mm) 4” (114 mm)
01-05-2010
13www.brouwersequipment.com
Tube clamps
Description Dimensions Model
Corner clamp cast iron 2” x 2” 5510-9619-001
Tube clamp
1” x 1”1¼” x 1¼”1½” x 1”1½” x 1¼”1½” x 1½”
5510-9620-0005510-9620-0015510-9620-0025510-9620-0035510-9620-004
Tube clamp
1” x 1”1¼” x 1”1¼” x 1¼”1½” x 1”1½” x 1¼”1½” x 1½”1½” x 2”1½” x 2½”
2” x 2”
5510-9621-0055510-2434-0005510-9621-0075510-9621-0095510-9621-0105510-9621-0015510-9621-0125510-9621-0085510-9621-017
Tube clamp with duplex coating 2” x 1½” 5510-9621-013
Cross clamp 1½” x 1½” 5510-9622-001
Cross clamp2” x 1½”
2½” x 1½”5510-9623-0015510-9623-002
Tube clamp with 6 cm spacer 1½” x 1½” 5510-9624-001
Description Dimensions Model
Tube clamp with seperate spacer 2” x 1½” 5510-9625-002
Tube clamp
1½” x 1½”2” x 1½”2” x 2”
2½” x 1½”2½” x 2”2½” x 2½”
5510-9626-0055510-9626-0065510-9626-0075510-9626-0095510-9626-0105510-9626-008
Adjustable parallel clamp
1” x 1”1¼” x 1”1½” x 1¼”1½” x 1”1½” x 1¼”1½” x 1½”
5510-9627-0025510-9627-0035510-9627-0045510-9627-0055510-9627-0065510-9627-007
Corner clamp
1½” x 1½”2” x 1½”2” x 2”
2½” x 1½”2½” x 2”2½” x 2½”
5510-9628-0035510-9628-0055510-9628-0065510-9628-0095510-9628-0105510-9628-008
Cross clamp
2½” x 1½”2½” x 2”2½” x 2½”
5510-9629-0055510-9629-0065510-9629-004
Mounting clamp, without carriage bolts
¾”1”
1¼”1½”
2”2½”
3”3½”
4”
5530-9630-0005530-9630-0015530-9630-0115530-9630-0025530-9630-0035530-9630-0045530-9630-0055530-9630-0065530-9630-007
01-05-2010
Gummysoft
14 Tel. 0031-58-2911129
A good floor covering helps you to maximise the performance of your cows. Research has shown that cows appreciate the comfort of a soft bedding. They stay longer in the cubicles and use less phy-sical energy. As their well-being improves, they are less susceptible to stress and are more resistant to infections and thus are healthier. And, after all, a healthy cow is a profitable cow.
Practice has learned that cows rest on these mattresses for as much as up to 16 hours per day. Ruminating in a lying position is more effective, it stimulates the blood circulation in the udder and the legs will be relieved when the cows are lying. The cop cover is a thick rubber mat supplied on a roll. It is strong, it retains moisture and it is easy to clean. The underlay is a mattress of 100% polyurethane foam. Independent research by the German DLG has shown that this material best keeps its flexibility. Cow have excellent grip on the mattress system. They can easily stand up and lie down, thus redu-cing worn patches on the joints.
Burled rubber
This burled rubber mat is deliverd on rolls, provided with a fabric inlay and made of new rubber with only a small percentage of regenerate. The mat can be fixed with hammer screws incl. washer, to be mounted each 25 cm, with a minimal distance of 10 cm from the front of the mat. A more luxuri-ous way of fixing is the stainless steel corner strip, with which you fasten the mat and at the same time seal it a the front.
Specific advantagesDelivery on rolls, also no puzzling with joints.• The closed top layer is clean and hygienic.• Rubber with a fabric inlay remains stable and flat.• New rubber with only a small percentage of regenerate.• Wear-resistant (10 years of guarantee).• Easy to lay and to fix.• Stable because of its large own weight.•
Gummysoft ModelReinforced rubber top cover, 180 cm wide
8 mm thick, per linear metre10 mm thick, per linear metre
5520-0328-0005520-0328-002
Rubber underlay strip, 10 mm thick, per linear metre(front and sides) 100 mm wide
(back) 200 mm wide5520-3508-0005520-3508-002
Wooden underlay strip, 26 mm thick, 100 mm wide (front and sides), per linear metre 5520-3508-019Polyurethane foam mattress, dimentions 150 x 100 cm, 25 mm thick, density 160 kg/m³ 5520-3506-004Stainless steel mounting strip, 45 mm wide, 3 metres long, with 11 holes 5520-3524-000Stainless steel drive-in screw with 8 mm plug, length 80 mm 5520-0503-005Stainless steel carriage bolt 6 mm
length 40 mmlength 60 mm
5500-1212-0015500-1212-003
Roll of 0,2 mm foil, dimension 50 x 4 metres 5520-3506-000Roll of tape for sealing the foil, 50 mm x 60 metres 5520-3506-003
Burled rubber ModelMeter of burled rubber mat
20 mm thick, 160 cm wide20 mm thick, 170 cm wide20 mm thick, 180 cm wide25 mm thick, 180 cm wide
5520-0336-0005520-0337-0005520-0338-0005520-0348-000
Stainless steel corner strip, length 3 m, with 11 holesfor burled rubber N20for burled rubber N25
5520-0758-0015520-3508-013
Stainl. steel hammer screw + plug 8 mm, length 80 mm 5520-0503-005stainless steel washer 8,4 x 25 5500-8000-154
Set for connecting two top mats
Cross-section Polysoft mattress
01-05-2010
Polysoft cubicle floor covering system
15www.brouwersequipment.com
The well-being of cows is fortunately getting more and more attention. The advantages, socially as well as economically, are evident. Prolongation of the daily lying duration of cows will increase the efficiency of the rumina-ting process and relieve the legs and claws, with an increase in recovering time. Floor covering should furthermore give grip to the cows, without being rough in the sense of sandpaper. The use of saw dust appears to lead to drier cubicles and cows. In order to keep the use of saw dust within limits, some structure on the surface is desirable. This list of demands is perfectly filled in by the Polysoft floor covering system.
A 100% polyurethane foam, with a density geared for the properties of the top mat, takes care of the suspension, flexibility and grip. The foam is being wrapped up in a heavy-duty foil, in order to prevent the absorbing of condensation fluid, especially from underneath.
The 100% moisture-resistant top mat composes of an extremely dense woven polyester reinforcement. This tissue combines great strength with a certain amount of elasticity. This enables peak loads to be spread over a larger surface. The biggest enemy of synthetics is ageing. The PVC coating which we use on this tissue is 100% PVC. Also no filling materials, that would help to make the top mat cheaper on the one hand, but on the other hand would speed up the ageing process and diminish the flexibility.
The Polysoft mattresses can also be delivered for young stock. Ask for the possibilities!
Polysoft calve mattress
New!The bottom in a calve stall mostly consists of straw, sans or saw dust. Cleaning takes a lot of time and is therefore done not often and/or not good enough, with all risks of infection. It is very miportant to maintain a high level of hygiene with new born calves. In order to achieve this goal Brouwers Equipment presents a new solution: the Polysoft calve mattress. This layer gives the new born calve the best possible start and makes cleaning the calve box a piece of cake.
The advantages: optimal animal well being, soft layer, gives grip to the animals, quick and easy cleaning, prevents infection diseases.
In short: before every birth you will quickly have a comfortable calve stall. A unique product which was tested far best in an independent Danish university test.
Polysoft cubicle floor covering system ModelMattress from polyurethane foam, density 180 kg/m³, dimensions 100 x 175 cm
3 cm thick4 cm thick
5520-3506-0055520-3506-006
Polysoft cover mat on roll, width 2 meters, per linear metresmooth design
lightly profiled design5520-3507-0015520-3507-002
Polyfleece cover mat on roll, width 2 metres, incl. 140 cm of fleece, per linear metre 5520-3507-006Roll with 0,2 mm plastic foil 5520-3506-000Roll of tape for sealing the foil, 50 mm x 60 metres 5520-3506-003
Polysoft calve mattress ModelPolysoft cover mat, available in lengths up to 6 metres
width 395 cm, per linear metrewidt 590 cm, per linear metre
5520-3507-0035520-3507-004
Mattress from polyurethane foam, density 180 kg/m³, dimensions 100 x 175 cm
3 cm thick4 cm thick
5520-3506-0055520-3506-006
Synthetic fastening strip, length 2 metres, with the double amount of drive-in screws 5520-3502-006
Fastening items ModelSynthetic fastening strip, length 2 metres
with stainless steel drive-in screwswith drive-in pins
5520-3502-0055520-3502-004
Aluminium fastening strip, length 2 metreswith stainless steel drive-in screws
with drive-in pins5520-3522-0245520-3522-023
Set for connecting two top mats, consisting of a synthetic strip, an aluminium strip and 4 concrete anchors 5520-3503-000Stainless steel drive-in screw with plug 8 mm, length 80 mm 5520-0503-005Drive-in pin 5520-0503-004Synthetic clamping disc 5520-0507-002Drift for drive-in pin (included in the supply) 5520-3523-000
01-05-2010
Locks® feed barriers
16 Tel. 0031-58-2911129
Why doesn’t the feed barrier watch each cow to be kept standing for an equal length of time? Why can’t the feed barrier lock an individual cow that needs treatment, without disturbing the rest of the herd? Why doesn’t the feed barrier tell every day how long an how often each individual cow took its roughage? Why doesn’t the feed barrier, or part of it, help to feed certain amounts of extra nourishment to selected cows?
Brouwers Equipment and Nedap from Groenlo have found the answer to all these questions and are introducing a completely new generation of feed barrier systems. The basic model is a mechanical safety barrier. In E-locks® the operating system communicates with every single feed opening.
M-locks®The basic model is a mechanical safety barrier. Individual manual two-sided unlocking is standard. Extremely light operation, which makes it possible to operate a great length of barrier from one point. Safety means that when a cow accidentally falls, the head can be easily freed from the feed opening. The barrier is noiseless by using maintenance free synthetic components instead of steel to steel.
E-locks® generalThe system consists of a certain amount of feed openings, each provided with an individual electrical actuator for the bolt slide. The bolt slide determines the position of the bolts. Underneath each actuator box is a surveyor (reed-contact) within the upper operating bar. With help of this surveyor and a permanent magnet in the catch bar buffer, the operating system can see when the catch bar is fully opened. Each actuator unit is individually secured. Each controller can manage 120 feed openings (actuators). These 120 feed openings can be devided into 6 groups, for which separate settings are possible. The operating system will always be overruled in case of individual unlocking by hand.
Mastitis preventionThis E-locks® function will take care that cows, who are eating at the feeding barrier after leaving the milking parlour, will be held for a preset time. This will keep each individual cow standing for an equal amount of time, independent of the time of locking-in, thus giving the udders time to dry and close under hygienic circumstances.
7355
01-05-2010
Locks® feed barriers
17www.brouwersequipment.com
M-locks® ModelM-locks® safety feed barrier
with 2 feed openings, 130 cm c.t.c., 65 cm per cowwith 2 feed openings, 140 cm c.t.c., 70 cm per cowwith 2 feed openings, 150 cm c.t.c., 75 cm per cowwith 3 feed openings, 195 cm c.t.c., 65 cm per cowwith 3 feed openings, 210 cm c.t.c., 70 cm per cowwith 3 feed openings, 225 cm c.t.c., 75 cm per cowwith 4 feed openings, 260 cm c.t.c., 65 cm per cowwith 4 feed openings, 280 cm c.t.c., 70 cm per cowwith 4 feed openings, 300 cm c.t.c., 75 cm per cowwith 5 feed openings, 325 cm c.t.c., 65 cm per cowwith 7 feed openings, 440 cm c.t.c., 63 cm per cowwith 7 feed openings, 500 cm c.t.c., 66 cm per cow
5530-7300-0185530-7300-0215530-7300-0235530-7300-0255530-7300-0285530-7300-0305530-7300-0325530-7300-0355530-7300-0385530-7300-0405530-7300-0435530-7300-045
Operating lever 5530-7355-005Operating lever foor 7300.280 5530-7355-013E-locks®E-locks® safety feed barrier
with 2 feed openings, 130 cm centre to centrewith 3 feed openings, 195 cm centre to centrewith 4 feed openings, 260 cm centre to centrewith 5 feed openings, 325 cm centre to centre
5530-7300-0685530-7300-070
Controller for 120 of E-locks® feed openings, to be divided into 6 groups at the most 5530-7300-055Fastening materialsCement-in support post 2½” with PVC sleeve and stopper, length 175 cm 5530-7801-001Cement-in support post 2½” with PVC sleeve, foot plate for prefab floor and stopper
length 175 cmlength 162 cmlength 152 cm
5530-7823-0065530-7823-0055530-7823-004
Mounting clamp 2½”, for fitting board below feed barrier, without bolts 5530-9630-004Standard set of mounting brackets (upper and lower mounting bracket) 325 cm centre to centre
for mounting to tube 2” ( 60 mm ø)for mounting to tube 2½” ( 76 mm ø)for mounting to tube 3” ( 89 mm ø)for mounting to tube 3½” (102 mm ø)
for mounting to a level surface
5530-7702-0255530-7702-0015530-7702-0355530-7702-0415530-7702-059
Set of middle mounting brackets for 2½” tube 5530-7702-033Set of end mounting brackets for 2½” tube 5530-7702-000Set of extended mounting brackets for 2½” tube
c.t.c. distance + 5 cmc.t.c. distance + 10 cmc.t.c. distance + 15 cm
Universal truss mounting set for 7300.500 5530-7360-019Hardware without support wheel 5530-7706-017Support wheel for gates from 195 cm centre to centre 5530-7333-001End post at extended mounting bracket 5530-7707-000Walk-through gateWalk-through gate incl. fastening items, internal walk-through width 35 cm, internal walk-through height 116 cm, overall walk-through height approx. 175 cm, overall width 65 cm (as 1 feed opening) 5550-7200-015
Anti-gorge functionWith this function you can “stack” the cows at the feed barrier. With help of the controller you can set this function for the desired group of feed ope-nings and close the concerning catch bars. The first feed opening, where the cows have to start eating, will be left ope by the system. Only after the first cow leaves the milking parlour and closes the catch bar with its head, the next feed opening will be unlocked etc.
Of course it is best to start at a place where jams from the milking parlour can be prevented as much as possible. In this way E-locks® also helps the cow routing. As a result of this function each cow has less opportunity to select the tasty bites from the adjacent forage.
Separating cowsFrom the catch position you can order certain feed openings to hold the cows concerned with help of the controller. The feed openings set in this way can be made visible on the controller, showing whether this is a single manual setting or an automatic setting.
Feed openings that have the instruction to lock in a cow for a longer period will be skipped with the anti-gorge function or the normal E-locks® mastitis prevention as mentioned before.
Centrally in catching positionWith the controller ou can centrally set the feed barrier in catching posi-tion. You can choose to set all feed openings, a group of feed openings, or a single feed opening in this position. This function can be handy to lock in certain animals. If you see a cow in a certain feed opening, it is also pos-sible to lock only this individual feed opening on the controller.
Unlocking groups of feed openingYou can unlock each group of feed openings from the closed position (all catch bars closed) at a set time. With this function you can prepare energetic forage at the feed barrier and automatically admit cows after they have had their portion of albuminous grass. Or you can automatically unlock groups of feed openings at certain times of the day with fresh or other kinds of forage.
19,5 65
155-160
55-60
+5
106
01-05-2010
Classic Locks feed barriers
18 Tel. 0031-58-2911129
New!Solid and spacious feed barrier. Simple and extremely light opera-tion in the upper profile, large lenth with one operating lever possible. Noiseless because of the synthetic cap on the catch bar. Easier to in-stall than its predecessor because of the fastening to mounting brac-kets. Can be built on to Locks® feed barriers.
Classic Locks ModelClassic Locks self-locking feed barrier
with 2 feed openings, 130 cm c.t.c., 65 cm per cowwith 2 feed openings, 140 cm c.t.c., 70 cm per cow with 2 feed openings, 150 cm c.t.c., 75 cm per cowwith 3 feed openings, 195 cm c.t.c., 65 cm per cowwith 3 feed openings, 210 cm c.t.c., 70 cm per cowwith 3 feed openings, 225 cm c.t.c., 75 cm per cowwith 4 feed openings, 260 cm c.t.c., 65 cm per cowwith 4 feed openings, 280 cm c.t.c., 70 cm per cowwith 4 feed openings, 300 cm c.t.c., 75 cm per cowwith 5 feed openings, 325 cm c.t.c., 65 cm per cowwith 7 feed openings, 440 cm c.t.c., 63 cm per cowwith 7 feed openings, 500 cm c.t.c., 66 cm per cow
5530-7400-0235530-7400-0255530-7400-0275530-7400-0295530-7400-0315530-7400-0335530-7400-0355530-7400-0375530-7400-0395530-7400-0415530-7400-0445530-7400-046
Operating lever 5530-7455-004Fastening materialsCement-in support post 2½” with PVC sleeve and stopper, length 175 cm 5530-7801-001Cement-in support post 2½” with PVC sleeve, foot plate for prefab floor and stopper
length 175 cmlength 162 cmlength 152 cm
5530-7823-0065530-7823-0055530-7823-004
Mounting clamp 2½”, for fitting board below feed barrier, without bolts 5530-9630-004Standard set op mounting brackets (upper and lower mounting bracket), 325 cm centre to centre
for mounting to tube 2” ( 60 mm ø)for mounting to tube 2½” ( 76 mm ø)for mounting to tube 3” ( 89 mm ø)for mounting to tube 3½” (102 mm ø)
for mounting to a level surface
5530-7702-0255530-7702-0015530-7702-0355530-7702-0415530-7702-059
Set of middle mounting brackets for 2½” tube 5530-7702-033Set of end mounting brackets for 2½” tube 5530-7702-000Set of extended mounting brackets for 2½” tube
c.t.c. distance + 5 cmc.t.c. distance + 10 cmc.t.c. distance + 15 cm
Hardware without support wheel 5530-7706-017Support wheel for gates from 195 centre to centre 5530-7333-001End post at extended mounting bracket 5530-7707-000
19,5 65
104
155-160
55-60
+5
01-05-2010
Feed barriers for young stock
19www.brouwersequipment.com
The self-locking feed barriers for young stock have a multiple operating system (opened centrally, in catch position centrally, in free in-out position centrally and every feed opening can be opened indi-vidually). With the internal locking system being integrated in the upper operating bar, the feed bar-riers are finished smoothly, without projections. Because of the use of synthetic parts, the feed barriers are ear(tag)-friendly. An adjustable neck width is standard.
Stock from 12 - 22 months ModelBarrier element
with 2 feed openings, 119 cm centre to centrewith 3 feed openings, 171 cm centre to centrewith 4 feed openings, 222 cm centre to centrewith 5 feed openings, 274 cm centre to centrewith 6 feed openings, 325 cm centre to centrewith 8 feed openings, 440 cm centre to centre
5530-7640-0065530-7340-0085530-7340-0105530-7340-0125530-7340-0145530-7340-016
Stock from 6 - 15 monthsBarrier element
with 2 feed openings, 108 cm centre to centrewith 3 feed openings, 151 cm centre to centrewith 4 feed openings, 195 cm centre to centrewith 5 feed openings, 238 cm centre to centrewith 6 feed openings, 282 cm centre to centrewith 7 feed openings, 325 cm centre to centrewith 9 feed openings, 440 cm centre to centre
5530-7350-0075530-7350-0095530-7350-0115530-7350-0135530-7350-0155530-7350-0175530-7350-020
Stock from 2-6 months (also suitable for goats)Barrier element
with 2 feed openings, 87 cm centre to centrewith 4 feed openings, 155 cm centre to centrewith 5 feed openings, 189 cm centre to centrewith 6 feed openings, 223 cm centre to centrewith 7 feed openings, 257 cm centre to centrewith 9 feed openings, 325 cm centre to centrewith 12 feed openings, 440 cm centre to centre
5530-7360-0055530-7360-0075530-7360-0095530-7360-0115530-7360-0135530-7360-0155530-7360-017
Operating leverOperating lever (up to approx. 25 feed openings) 5530-7305-004HardwareHardware without support wheel
for barriers 7340 and 7350for barriers hekken 7360
5530-7706-0165530-7706-015
Support wheel for gates from 195 centre to centre 5530-7733-003Support postsCement-in support post with PVC sleeve and stopper
for 7340 and 7350, length 165 cm, 2½”for 7360, length 145 cm, 2”
5530-7801-0005530-7801-004
Cement-in support post with PVC sleeve, foot plate for prefab floor and stopper
for 7340, length 145 cm, 2½”for 7350, length 132 cm, 2½”for 7360, length 122 cm, 2”
5530-7823-0035530-7823-0015530-7823-000
Mounting clamp for fitting board below feed barrier, without bolts2½”
2”5530-9630-0045530-9630-003
Measurements feed barriers for young stockA B C D E
12 - 22 months 93 cm 54 cm 15 - 22 cm 143 cm 56 cm6 - 15 months 93 cm 46 cm 12 - 18 cm 138 cm 51 cm2 - 6 months 79 cm 40 cm 8 - 13 cm 118 cm 44 cm
01-05-2010
Mounting brackets Modelstandard set of mounting brackets (upper and lower bracket) 325 cm centre to centre
for mounting to tube 2” ( 60 mm ø)for mounting to tube 2½” ( 76 mm ø)for mounting to tube 3” ( 89 mm ø)for mounting to tube 3½” (102 mm ø)
for mounting to a level surface
5530-7702-0255530-7702-0015530-7702-0355530-7702-0415530-7702-059
Set of middle mounting brackets for 2½” tube 5530-7702-033Set of end mounting brackets for 2½” tube 5530-7702-000Set of extended mounting brackets for 2½” tube
c.t.c. distance + 5 cmc.t.c. distance + 10 cmc.t.c. distance + 15 cm
7305
C B
D
E
+5
A
Self-locking Swedish feed barriers
20 Tel. 0031-58-2911129
This self-locking Swedish feed barrier is specially designed for large stock. The partitions are made from ø 57 mm tubing and have round “angles”, which makes it easy to get in and out of the feed barrier, even for smaller cows. The catch bar is made from 1¼” (ø 42 mm) tubing and is provided with an individual unlocking possibility and collar protection underneath. The turning point has a bronze bearing (unnecessary to grease!). The lower profile is 70 x 70 mm square, which makes it additionally strong.
At gates from 440 cm an additional 2½” support post has to be placed. Special mounting parts are included in the supply. The Swedish feed bar-riers can also be delivered without locking bar (not self-locking).
Self-locking Swedish feed barriers ModelSelf-locking Swedish feed barrier for large stock
with 1 feed opening , 65 cm centre to centrewith 2 feed openings, 130 cm centre to centrewith 3 feed openings, 195 cm centre to centrewith 4 feed openings, 260 cm centre to centrewith 5 feed openings, 325 cm centre to centrewith 7 feed openings, 440 cm centre to centrewith 7 feed openings, 460 cm centre to centre
5530-7900-0005530-7900-0025530-7900-0045530-7900-0065530-7900-0085530-7900-0115530-7900-013
Self-locking Swedish feed barrier for young stock from 6-18 months
with 2 feed openings, 105 cm centre to centrewith 5 feed openings, 237 cm centre to centrewith 7 feed openings, 325 cm centre to centre
5530-7940-0005530-7940-0025530-7940-004
AccessoriesSupport post with protective sleeve
2½” x 175 cm2” x 145 cm
5530-7801-0015530-7801-004
Support post with cement-in foot plate and prot. sleeve2½” x 162 cm2½” x 152 cm2½” x 142 cm
5530-7823-0055530-7823-0045530-7823-003
Self-locking door setfor large stock barriers up to max. 325 cm
for young stock barriers5530-7926-0005530-7926-001
Support wheelfor large stock barriers from 195 cm
for young stock barriers from 237 cm5530-7833-0025530-7833-003
Set of mounting parts 2½” 0-5 cm 5530-7902-000Locking lever 5530-7905-018Set of wall brackets 5530-7914-001Mounting bracket 2½” without bolts 5530-9630-004
Measurements self-locking Swedish feed barriers (in cm)A B C D E F G H K
Large stock 86 49-54 ± 65 20 ø 5,7 1¼” □ 7x7 135-140 max. 150Young stock 74 41-46 ± 45 17 1½” 1” □ 6x6 115-120 120
01-05-2010
∆∆
length centre to centre
E D C
A
B
F
G
HK
P=0+5/+10
Diagonal bar feed barriers
www.brouwersequipment.com 21
Diagonal bar feed barriers are suitable only for dehorned stock. Upper and lower tubes 1½”, ver-ticals 1”. Because the barriers of 440 cm have a 2” upper and lower tube (7870) or a strengthened 1½” upper and lower tube (7880 and 7890) no extra support post is necessary anymore.
Stock from 18 months ModelBarrier element
with 2 feed openings, 135 cm centre to centrewith 5 feed openings, 250 cm centre to centrewith 7 feed openings, 325 cm centre to centrewith 10 feed openings, 440 cm centre to centre
5530-7870-0005530-7870-0025530-7870-0045530-7870-006
Stock from 8-18 monthsBarrier element
with 2 feed openings, 125 cm centre to centrewith 5 feed openings, 225 cm centre to centrewith 8 feed openings, 325 cm centre to centrewith 11 feed openings, 440 cm centre to centre
5530-7870-0085530-7870-0105530-7870-0125530-7870-014
Stock from 2-6 monthsBarrier element
with 3 feed openings, 145 cm centre to centrewith 5 feed openings, 205 cm centre to centrewith 7 feed openings, 265 cm centre to centrewith 9 feed openings, 325 cm centre to centrewith 13 feed openings, 440 cm centre to centre
5530-7880-0015530-7880-0035530-7880-0055530-7880-0075530-7880-009
Stock from 0-10 weeksBarrier element
with 3 feed openings, 130 cm centre to centrewith 6 feed openings, 205 cm centre to centrewith 8 feed openings, 255 cm centre to centrewith 11 feed openings, 325 cm centre to centrewith 15 feed openings, 440 cm centre to centre
5530-7890-0005530-7890-0025530-7890-0045530-7890-0065530-7890-008
HardwareHardware for turning barrier elements into gate elements
for 7870H and 7870for 7880 and 7890
5530-7876-0085530-7876-007
Support wheel for barriers from 250 cm 5530-7883-001Support postsCement-in support post with PVC sleeve and stopper
for 7870H, length 175 cm, 2½”for 7870, length 165 cm, 2½”
for 7880-7890, length 145 cm, 2”
5530-7801-0015530-7801-0005530-7801-004
Cement-in support post with PVC sleeve, foot plate for prefab floor and stopper
for 7870H, length 152 cm, 2½”for 7870, length 142 cm, 2½”
for 7880-7890, length 122 cm, 2”
5530-7823-0045530-7823-0035530-7823-000
Mounting bracket for fastening board below feed barrier, without bolts
2½”2”
5530-9630-0045530-9630-003
Mounting bracketsStandard set of mounting brackets (upper and lower bracket) 325 cm centre to centre
for 2” tubefor 2½” tubefor 3” tube
5530-7822-0005530-7822-0035530-7872-010
Set of end mounting brackets for 2½” tube 5530-7872-002
Measurements diagonal bar feed barriersA B C D
> 18 months 88 cm 30 cm 145 cm 62 cm8-18 months 88 cm 26 cm 135 cm 52 cm2-6 months 80 cm 23 cm 110 cm 45 cm0-10 weeks 80 cm 19 cm 110 cm 45 cm
01-05-2010
C
D
+5
BB A
Feed barriers for fattening stock and bulls
22 Tel. 0031-58-2911129
The feed barrier bars of the English feed barrier have been designed so that they cannot turn in the H-sections and can be shortened on site to the indicated minimum length. A simple securing system ensures that the feed barrier bars can be easily installed and removed.
H-sectionsThe H-sections have been pre-treated to accomodate:
A height-adjustable lower bar, neck bar and retaining bar.• (Pivoted) intermediate barriers.• A drinker.•
Self-locking feed barrierFor catching cows, which are usually accommodated in stalls, a self-loc-king feed barrier is required, also and in particular for safe treatment. The heavy-duty, large self-locking feed barrier has been developed to be used for a wide variety of breeds and ages.
Prices on demand.
01-05-2010
Hinge at tthe top Hinge at the bottom Lock at the top Lock at the bottom
Hinge Lock support post Lock wall
Portable sliding grouping barrier
Double routing gate
Screw-on support post Routing gate element
Double lock Hinge and lock Double hinge
Single lock Single hinge
Renovation support posts ModelSupport post extension, 15 cm long, without bolt, hot-dip galva-nised
for flat upper side(not shown) for round upper side
5530-7185-0025530-7185-001
Thick-walled clamping sleeve to repair support posts attacked by rust
length 42 cm, for 2” buislength 60 cm, for 2½” buis
5530-1990-0025530-1990-000
Cross-over lockersCross-over locker for easily locking gates across the feed alley
single, for 7800 and 7212double, for 7800 and 7212
single, for 7300double, for 7300
5550-7113-0005550-7113-0015550-7114-0005550-7114-002
Folding-up head barHinge bracket for head bar (1 per 3 feed openings and 1 per row, for fitting gate elements 2 hinge brackets are required)
for 7800/40/50/60, 1”(2 per 325 cm) for 7300, ½” 5530-7802-003
5530-7802-0021” head bar, per length of 600 cm 5510-8511-001
Accessories for feed barriers
www.brouwersequipment.com 23
Hinges and locks ModelHardware set for Locks® feed barriers, consisting of hinge elements, locking pieces and locking pin, including board fitting brackets
for Locks® barriersfor 7340 and 7350
for 7360
5530-7706-0175530-7706-0165530-7702-015
Support wheelfor Locks® barriers
for 73605530-7333-0015530-7733-003
Hardware set for self-locking feed barriers model 7800, consis-ting of two hinges and two locks at choice, including board fitting brackets, without support wheel
5530-7806-001Set of universal hardware for feed barriers
double lock to support posthinge and lock to support post
double hinge to support postsingle lock to support post
single hinge to support post 5530-7838-010Set of two clamping brackets with hinge plate for 2½” support post
complete with hinge part and pinwithout hinge part and pin
5550-7212-0195550-7727-000
Grouping area barriers
01-05-2010
Support post extension Clamping sleeve Folding-up head bar
single
doubleSet of clamping brackets
Grouping area barriers ModelPortable sliding grouping barrier, with lock and hinge, for interme-diate spaces of 260-325 cm
to cubicle - cubicle, 1½”to cubicle - cubicle, 2”
to cubicle - self-locking feed barrierto cubicle - diagonal bar feed barrier
to cubicle - Tip-Top barrier
5550-7200-0105550-7200-0115550-7200-0125550-7200-0135550-7200-014
Portable sliding grouping barrier, with lock and hinge, for interme-diate spaces of 300-355 cm
to cubicle - cubicle, 1½”to cubicle - cubicle, 2”
to cubicle - self-locking feed barrierto cubicle - diagonal bar feed barrier
to cubicle - Tip-Top feed barrier
5550-7200-0215550-7200-0225550-7200-0235550-7200-0245550-7200-025
Routing gateDouble routing gate, for a manure passage width from 200 to 250 cm, incl. length-adjustable side fastenings
for fastening to 1½” tubefor fastening to 2” tube
5550-7230-0105550-7230-011
Routing gate element, incl. threaded straps, for fitting to 2½” support post 5550-7230-004
Screw-on support posts
Srew-on support post 2½” (76 mm ø) with foot plate, counter profiles and cap screws, for fitting support posts on grid floor, 150 cm long
without grid lockerswith grid lockers
5550-7822-0025550-7822-008
Separate counter profile, 150 cm long 5550-1925-001
Cap screw 12 mm, 200 mm long 5500-1213-004
Self-locking gate
Self-locking gate, suitable for passages up to 110 cm wide 5550-7240-000
The grouping area barriers model 7200 are suitable for a grid scraper. Provided standard with walk-through opening. Hinged and quickly mova-ble.
The routing gate which serves to prevent stock from walking back is espe-cially suited to create a closed off space for an automatic milking system, which can only be exited via the robot milker. Provided with double, noise-reducing sound-damping gate turning bars.
A self-locking gate locks the return passage in the milking parlour. The wall hinge strip is screwed to the wall slightly inclined by means of through bolts. The special, inclined position of the hinges ensures that when ope-ned the gate automatically closes again.
85 cm
Self-locking gate
Cross-over lockers
Grouping area barriers
24 Tel. 0031-58-2911129
The model 7213 grouping area barriers are available, with the application of extension and attaching parts, in various versions. For a hold area bar-rier you need one grouping barrier, one hinge and one lock. A tilting gate consists of one grouping barrier, one tilting unit short and one tilting unit long with counter weight (for barriers up to and including 345 cm long). For a slidinig barrier you need two grouping barriers (at least 100 cm overlap), one set of guiding brackets, one hinge and two locks. The portable sliding barriers consist of one grouping barrier and one set of grid lockers.
Grouping barriers 98 cm high ModelGrouping barrier 98 cm high, hot dip galvanised, for stock from approx. 8 months, can be shortened 45 cm maximally
length 140 cmlength 185 cmlength 230 cmlength 270 cmlength 295 cmlength 320 cmlength 345 cm
with additional vertical, length 370 cmwith additional vertical, length 415 cmwith additional vertical, length 460 cm
5550-4295-0005550-4295-0015550-4295-0025550-4295-0035550-4295-0045550-4295-0055500-4295-0065550-4295-0075550-4295-0085550-4295-009
Hinges and locks for 98 cm barrier heightHinge for 98 cm barrier height
to wallto front of cubicle (1½” tube)to front of cubicle (2'’ tube)to rear of cubicle (1½” tube)to rear of cubicle (2” tube)
5550-7213-0485550-7213-0715550-7213-0735550-7213-074
Hinge set by means of clamp 9628 with bolt 5510-9628-011Lock for 98 cm barrier height
to self-locking feed barrier (wall)to self-locking feed barrier (boards
to wallto rear of cubicle (2” tube)to front of cubicle (2” tube)
5550-7213-0515550-7213-0525550-7213-0535550-7213-0765550-7213-078
Set of universal hardware for grouping area barrierssingle lock to support post
double lock to support posthinge and lock to support post
double hinge to support postsingle hinge to support post
5550-7213-0145550-7213-0155550-7213-0165550-7213-0175550-7213-018
Accessories tilting gate for 98 cm barrier heightTilting unit short
to front of cubicle, 2”to wall and support post, 2½”
to rear of cubicle, 1½”to rear of cubicle, 2”
5550-7213-0545550-7213-0605550-7213-0635550-7213-064
Tilting unit long, with counter weightto feed barrier 7300
to self-locking feed barrier (wall)to self-locking feed barrier (boards)
to diagonal bar feed barrier (boards)to wall and support post, 2½”
to rear of cubicle, 1½”to rear of cubicle, 2”
5550-7213-0555550-7213-0565550-7213-0575550-7213-0595550-7213-0615550-7213-0655550-7213-066
01-05-2010
Grouping barriers 79 cm high ModelGrouping barrier 79 cm high, hot dip galvanised, for dairy cattle, can be shortened 45 cm maximally, suited for barns with manure removing robots
length 140 cmlength 185 cmlength 230 cmlength 270 cmlength 295 cmlength 320 cmlength 345 cm
with additional vertical, length 370 cmwith additional vertical, length 415 cmwith additional vertical, length 460 cm
Hinges and lock for 79 cm barrier heightHinge for 79 cm barrier height
to wallto front of cubicle (1½” tube)to front of cubicle (2'’ tube)to rear of cubicle (1½” tube)to rear of cubicle (2” tube)
Hinge set by means of clamp 9628 with boltLock for 79 cm barrier height
to self-locking feed barrier (wall)to self-locking feed barrier (boards)
to wall)to rear of cubicle (2” tube)to front of cubicle (2” tube)
Set of universal hardware for grouping area barrierssingle lock to support post
double lock to support posthinge and lock to support post
double hinge to support postsingle hinge to support post
Accessories tilting gate for 79 cm barrier heightTilting unit short
to front of cubicle, 2”to wall and support post, 2½”
to rear of cubicle, 1½”to rear of cubicle, 2”
Tilting unit long, with counter weightto feed barrier 7300
to self-locking feed barrier (wall)to self-locking feed barrier (boards)
to diagonal bar feed barrier (boards)to wall and support post, 2½”
to rear of cubicle, 1½”to rear of cubicle, 2”
Grouping area barriers
www.brouwersequipment.com 25
Telescopic grouping area barriers ModelTelescopic barrier, height 98 cm, with adjustable hinge, 7213.08, incl. pen lock and locking loop
telescopic from 200 to 300 cmtelescopic from 250 to 400 cmtelescopic from 300 to 500 cm
5550-7213-0215550-7213-0235550-7213-025
Pen locksPen lock for grouping area barriers of 98 cm high
lock for 2½” tubelock for 3” tube
hinge for 2½” tubehinge for 3” tube
locking loop wihout parts
5550-7213-0415550-7213-0425550-7213-0435550-7213-0445550-7212-005
Pen lock for seperating barriers 7665, 109 cm highlock for 2½” tube
hinge to wall5550-7675-0165550-7675-021
Support wheelUniversal support wheel with pneumatic tyre (specifically for sup-port over a slatted floor) 5550-7219-006Separating barriersSeparating barrier, 109 cm high, space between the verticals 9,8 cm (12,5 cm centre to centre), upper and lower bar 1½” (48 mm ø), verticals ¾” (27 mm ø)
without drinker opening, 150 cmwithout drinker opening, 250 cmwithout drinker opening, 275 cm
without drinker opening, 325 cmwithout drinker opening, 350 cmwithout drinker opening, 400 cmwithout drinker opening, 450 cm
with drinker opening, 250 cmwith drinker opening, 275 cmwith drinker opening, 325 cmwith drinker opening, 350 cmwith drinker opening, 400 cmwith drinker opening, 450 cm
5550-4294-0045550-4294-0055550-4294-0075550-4294-0095550-4294-0105550-4294-0125550-4294-0135550-4294-0065550-4294-0085530-4294-0005550-4294-0115530-4294-0015530-4294-002
01-05-2010
New!
Telescopic grouping area barrier
New!
Lock pen lock Support wheel
Hinge pen lock
5550-7213-014 5550-7213-015 5550-7213-016 5500-7213-017 5500-7213-018
Housing systems for horses
26 Tel. 0031-58-2911129
The Brouwers Euro calf pens are available with two different kinds of partitions: solid impact-proof PVCU (18 mm thick) or waterproof lami-nated wood with an aluminium frame. Both pens have a removable and revolving front barrier and a hardwood slatted floor. Equipped with a wheel assembly, the pens can be wheeled out individually so that the livestock dealer and carrier do not have to get inside. The version with roof is a good alternative to the igloo hut. The calf then has a comfortable, dry straw bedding, because the liquid manure is drained off through the floor.
Brouwers Equipment supplies a wide range of horse boxes, outside stables, jumping materials, drinking systems and accessories. As for the horse boxes we notice a trend in using synthetic materials, especially for the new series of horse boxes. The used material almost looks natural, as wooden planks, but the difference is that thes planks are made of mainte-nance free synthetic.
Horse boxesThe standard horse boxes can be equipped with synthetic or hardwood planks. The boxes are galvanised an/or provided with an additional pow-der coating. The grating is made of vertical bars c/c 80 mm and is 1050 mm high. The finishing is galvanised. Besides the standard horse boxes, Brouwers Equipment also delivers made-to-measure horse boxes.
Horse box panelsCan be supplied with a front panel with sliding door. The sliding doors can be equipped with filling planks from hardwood or synthetic material, in the colours brown, green or black. They are equipped with vertical bars, lockable feed opening, revolving door or entirely closed. The intermediate panels can be equipped with filling planks from hardwood or synthetic ma-terial, in the colours brown, green or black. You can choose between an entirely closed intermediate panel or a panel partly equipped with fencing.
Measurements horse boxesTotal height boxes: 2250 mm.• Height synthetic or woord: 1500 mm.• Height grating: 1050 mm.• Width door: 1300 mm.• Total height door at top of grating: 2250 mm.•
• Prices, extra accessories and/or special boxes on demand.
Drinking systems ModelDrinker for fitting to wall, bottom-connected, without coupling
0066.HZKSYFeedersFeeder, wall model 4070.VBWAHayrackHayrack, wall mounted, hot dip galvanised, dim. 85 x 48 x 59 cm
4071.HR083
Euro calf pens
01-05-2010
Drinker Feeder, wall model Hayrack
Euro calf pens
www.brouwersequipment.com 27
Euro calf pens ModelRevolving front barrier, width 86 cm 5550-7685-001Upright for rear panel 5550-7684-000Partition
end partition PVCUcentral partition PVCU
end partition laminated woodcentral partition laminated woord
5550-7686-0055550-7686-0065550-7656-0025550-7656-003
Rear panel including fastening itemsPVCU
laminated wood5550-7687-0075550-7657-001
Hardwood slatted floor of planed Azobe 5550-7659-000Angle iron with bolts, for fixing partition to wall 5550-7658-002Sliding roofPolyester sliding roof, 160 cm long, with top extension for rear panel 5550-7675-018Top extension for partition, including guides
for end partition PVCUfor central partition PVCU
for end partition laminated woodfor central partition laminated wood
5550-7690-0055550-7690-0065550-7677-0055550-7677-006
Mobile underframeWheel assembly, for making one calf pen movable 5550-7682-004Dolly for moving one calf pen 5550-7682-000Accessories for feedingDouble bucket holder with bucket clamp for fixing on top or underneath 5550-7681-000PVCU 12 litre calf bucket 5580-2755-000Stainless steel concentrates bowl 5530-2223-000PVCU self-feeder
with plate for wall-mountingfor placement in bucket holder
5530-2225-0005530-2225-001
Separate teat 5580-2748-000Hayrack
for PVCU partitionfor woorden partition
5550-7652-0015550-7652-000 Self-feeder Calf bucket Concentrates bowl
01-05-2010
Partitions for tying stalls
28 Tel. 0031-58-2911129
All partitions are hot-dip galvanised. The lengths mentioned include 20 cm cement-in. For the height of she stall you should subtract 20 cm of the linear measurement.
The neck bows give freedom of movement to the cows when lying down and standing up. Standing cows are forced to place their hind legs on the edge of the dung channel, which prevents the stands from being fouled. The neck bows can be individually adjusted for each cow.
Support posts and h-partitions ModelSupport post 2”, with PVC sleeve, 230 cm long 5550-8702-001h-partition, 2” x 1½”, wit PVC sleevesk dim. 220 x 110 x 60 cm 5550-1200-004End-h-partition 2” x 1½”, with PVC sleeves, dim. 230 x 110 x 100 cm 5550-8752-000Universal beam fork for 2” tube 5550-8735-000Separate end-plate 5550-8736-000Stall partitionU-partition 110 x 60 cm, with PVC sleeves 5550-3106-000End partition 110 x 100 cm, with intermediate tube, with PVC sleeves 5550-3111-000Hairpin partition 110 x 33 cm, with intermediate bars and rings, with PVC sleeves 5550-8861-000Tube bushesTube bush
for 1½” tube, 22 cm longfor 2” tube, 22 cm longfor 2½” tube, 32 cm long
5550-8780-0005550-8784-0005550-8785-000
Neck bowsNeck bow complete 5550-9600-001Neck bow 1½”, hot-dip galvanised, for cows 5550-3173-000Support post 2”, with PVC sleeve (2 per stand) 5550-9605-000Tube clamp 2” x 1½” (2 per stand) 5510-9625-002Nylon cow collar 135 cm 5510-2017-002Hot-dip galvanised link buckle 5580-2045-000Double cow chain, 40 cm long 5580-2025-000Ring 10 x 80 mm (2 per stand) 5500-8000-181Bow shackle 10 mm (2 per stand) 5580-4110-004Chain positioner 2” (2 per stand) 5550-2028-000PVC stopper 2” (2 per stand) 5500-8007-002Dung gridsDung grid 12 mm ø patterned steel, hot-dip galvanised, with recessed bars, supports 33 cm between centres, dung passage width 36-38 mm, grid height 40 mm
dimensions 149,5 x 79,5 cmdimensions 99,5 x 79,5 cmdimensions 49,5 x 79,5 cmdimensions 99,5 x 99,5 cmdimensions 49,5 x 99,5 cm
5510-3535-0085510-3535-0065510-3535-0165510-3535-0075510-3535-005
Dung grid with five rubber-coated barsdimensions 99,5 x 79,5 cmdimensions 49,5 x 79,5 cmdimensions 99,5 x 99,5 cmdimensions 49,5 x 99,5 cm
5510-3535-0105510-3535-0215510-3535-0115510-3535-022
Rubber matsRubber mat with straight continuous antiskid profile, 17 mm thick, weitht approx. 20 kg/m² (delivery ex works)
width 110 cm, length 200 cmwidth 110 cm, length 175 cmwidth 100 cm, length 200 cmwidth 100 cm, length 175 cmwidth 100 cm, length 150 cm
5520-0021-0005520-0117-0005520-0020-0005520-0017-0005520-0015-000
Coach screw 8 x 60 mm (3 per mat) 5500-1211-005Plastic plug (3 per mat) 5500-1218-003Stainless steel washer (3 per mat) 5500-1221-004
01-05-2010
Neck bow Rubber mat
Dung grid100
69
Neck bow
Cow collar
PVC stopper
Tube clamp
Cow chain
Ring
Chain positioner
Support post
U-partition End partition Hairpin partition
Support post h-partition End-h-partition
Beam fork End-plate
Suspended chains and nylon strap ties
www.brouwersequipment.com 29
The Brouwers suspended chains and nylon strap ties all are of an excel-lent quality. the green nylon bands are tightly woven and have wear-resistant sides of even stronger white nylon. There is a large choice of stanchions. The tying systems can be delivered in each desired length. In order to determine the necessary length, you measure the height of the stall and add 10 cm.
Nylon strap ties and syspended chains ModelGreen nylon band with white wear-resistant sides, above a triangle with 7 links, under a ring with 2 links
length 170 cmlength 182 cmlength 190 cmlength 200 cm
5510-9066-0005510-6010-0005510-9066-0025510-9066-003
Suspended cahain with straight links, length 182 cm 5510-6080-000StanchionsStanchion for 9060, for cows 5580-9093-000Stanchion with nine rings and flat connecting links, for fattening stock 5510-9099-001Fastening materialAdjustable ceiling fastener
with bow shacklewit C-hook
5510-9200-0015550-5120-000
Single floor anchor, material above hole 27 x 17 mm, height 14 cm 5580-4153-000Adjustable floor anchor, material above holes 28 x 18 mm, height 14 cm 5580-4153-001Safety fastener 5510-9143-000Safety fastener for tubes
1½”2”
5510-9143-0025510-9143-007
C-hook 5510-9141-000Upper chain 7 mm, per metre 5510-9144-000Bow shackle 10 mm 5580-4110-004
01-05-2010
9066 Stanchion for fattening stock C-hook Bow shackle
9143 9143.6
Stanchion Single floor anchor Adjustable floor anchor
Adjustable ceiling fasteners
15 153 3
Water troughs
30 Tel. 0031-58-2911129
There are several options to connect the water troughs. The troughs can be connected directly to the water by means of a 3/8” float valve. When using a communicating system a main reservoir with float valve in the mil-king parlour is connected to the water mains. The troughs are connected to the main reservoir by means of a service pipe. In a circulation system the troughs are additionally interconnected through return pipes, while the last trough is connected directly to the main reservoir. A circulation pump is placed at the end of the return pipe before the main reservoir.
On trough of 200 cm is sufficient for approx. 25 cows, a trough of 100 cm for approx. 15 cows, while a round drinker will do for approx. 10 cows.
Straight troughs ModelStraight drinking trough with PVC screw cap for draining and guard
with float valve 2910.K, length 100 cmwith float valve 2910.K, length 200 cmwith float valve 2910.B, length 100 cmwith float valve 2910.B, length 200 cm
5540-2900-0025540-2900-0065540-2900-0035540-2900-007
Straight drinking trough without float valve, with PVC screw cap for draining and 50 mm hose socket
length 100 cmlength 200 cm
5540-2901-0005540-2901-002
Straight main reservoir with PVC screw cap for draining and 50 mm hose socket, length 100 cm
with KIWA-aproved float valve 3/8”with float valve 3/4”
5540-2902-0005540-2902-001
Additional charge per reservoir for extra 50 mm PVC hose socket instead of screw cap for drainingHot-dip galvanised splash screen (in the troughs six holes must be drilled for fitting)
with half-open sides, 100 cmwith fully closed sides, 100 cm
with half-open sides, 200 cmwith fully closed sides, 200 cm
5540-2908-0085540-2908-0095540-2908-0105540-2908-011
Inclined troughsHot-dip galvanised inclined drinking trough including splash screen, without float valve, with 50 mm PVC hose socket and drain, length 85 cm, width 42 cm, depth 33 cm, to be fitted to/between cubicle partitions of 100 to 120 cm c.t.c.
for fitting to model-R cubicle partitionsfor fitting to English cubicle partitions 5540-2905-003
5540-2905-001Round drinkersHot-dip galvanised round drinker with reinforced rounded edge, without float valve, with 50 mm PVC hose socket and drain, height 40 cm, to be fitted to front of feed barrier, cubicle or wall
without brackets, for fitting to wallwith 1½” bracketswith 2” bracketswith 2½” brackets
5540-2904-0015540-2904-0025540-2904-0035540-2904-004
Polypropylene troughsPolypropylene main reservoir with 3/8” KIWA-approved float valve, 50 mm PVC hose socket and cover
80 x 40 x 41 cm, capacity 100 litres80 x 60 x 55 cm, capacity 200 litres
5540-2906-0095540-2906-010
Polypropylene reservoir as central float chamber in pig houses, with 1” gas thread outlet, 3/8” KIWA-approved float valve and cover
80 x 40 x 41 cm, capacity 100 liter80 x 60 x 55 cm, capacity 200 liter
5540-2906-0115540-2906-012
Set of brackets for polypropylene trough 100 or 200 litres 5540-2906-005
Separate components Model3/8” KIWA-approved float valve (capacity 450 litres per hour), only for connection to waterworks 5540-2910-0033/8” float valva (capacity 1.500 litres per hour), for own water supply, including plastic float valve ball 130 x 165 cm 5540-2910-000Guard for 3/8” float valve 5540-2913-0001/2” float valve with protective cover, for round drinkers 5540-3101-0073/4” float valve with PVC float
with mounting platewithout mounting plate
5540-2911-0085540-2911-009
1” low-pressure float valve for connection to precooler, including mounting plate 5540-2912-00350 mm PVC hose socket 5540-2913-003PVC screw cap for drain 5540-2913-010Hot-dip galvanised tube clamp 1½” x 1½”, for fitting drinkers to tubes (horizontal or vertical) or to wall 5510-9624-001PVC spriral hose, internal diameter 50 mm, per metre 5540-2915-000Hose clip 60 mm, for PVC hose 5540-2916-000
01-05-2010
Float valve for waterworks Float valve for own water supply
Polypropylene trough
Straight drinking trough
Splash screenhalf-open
Splash screenfully closed
Inclined drinking trough Round drinker
www.brouwersequipment.com 31
The thermo drinkers for cattle keep the water cool in summer and flowing in winter, without using electricity. Their simple construction, with few moving parts and extra insulation, reduces the risk of defects and freeze-ups. The thermo drinkers are made from strong polyethylene, preventing leakage and keeping the water fresh and free-flowing also under extreme weather conditions.
Durable construction of double-walled UV-resistant polyethylene, filled with urethane foam for insulation. Equipped with large-capacity float valve (4.500 litres/hour at 3,5 bar). Supplies the water faster than the cows can drink it. Fast emptying opening. Float chamber sealed off by means of a patented sealing system, without using rubber seals subject to wear. Long life, no corrosion.
Thermo drinkers ModelThero drinker for cattle
with 1 shut-off baal, dim. 70 x 50 x 48 cmwith 2 shut-off balls, dim. 107 x 63 x 48 cm
5540-2909-0025540-2909-055
Thermo watermaster ModelThermo watermaster with float valve 5.000 litres/hour
dim. 137 x 84 x 56 cmdim. 229 x 84 x 56 cmdim. 183 x 61 x 61 cmdim. 366 x 61 x 61 cm
5540-2909-0635540-2909-0655540-2909-0645540-2909-032
Thermo watermatic with float valve 1.300 litres/hourdim. 85 x 46 x 56 cmdim. 91 x 55 x 66 cm
5540-2909-0015540-2909-057
Heating element 250 Watt, with built-in thermostat, for all models 5540-2909-058
Thermo drinkers
Thermo watermaster
Drinker declining towards the outlet for an efficient discharge of dirty • water.Large outlet with manually operated slide seal for dry operation.• Provided with an anti-slop edge all-around.• With a float valve 40 litres/min, connection R ¾”.•
Quick Fresh drinker ModelQuick Fresh drinker stainless steel 1 metre
fixed to standsfixed to a wall
fixed between support posts
5540-2940-0035540-2940-0025540-2940-010
Quick Fresh drinker stainless steel 2 metresfixed to standsfixed to a wall
fixed between support posts
5540-2940-0075540-2940-0055540-2940-006
Quick Fresh drinker01-05-2010
New!
Spare parts for drinking bowls
32 Tel. 0031-58-2911129
On this page you will find spare parts of the present generation of drinking bowls. For most of the older models there are also still spare parts available. The model numbers of the Brouwers drinking bowls are cast in the bowls. Always check the model number before ordering spare parts.
Don’t drive the spring tightening nut too deep into the valve. The upper turn should just be visible.
The Brouwers drinking bowls are made from solid cast-iron, enamelled twice. The form of the bowls prevents spilling of water. The inside of the bowl is smoothly finished, which reduces the possibility of dirt deposition.
Following a process of research and regular checks by KIWA, the Brou-wers automatic drinkers comply with the KIWA assessment guideline 634 “cattle drinkers”. Each drinker is tested before delivery.
Spare parts for cattle drinkers ModelValve casing 5500-0121-000Valve pin with rubber and nut length 88 mm, bag 10 pieces 5540-0122-000Valve rubber, bag with 10 pieces 5540-0123-000Valve spring, bag with 10 pieces 5540-0124-000Spring tightening nut
high pressurelow pressure
5540-0126-0005540-0127-000
Gasket ring 5500-0131-000Synthetic seal cap for valve hole in drinking bowl 5500-0145-000Complete valve 5540-0113-001Complete valve with synthetic pusher and coupling
for bottom connectingfor top connection
5540-0113-0065540-0114-002
Valve spanner 5540-0140-000Pusher with axle
synthetic(only for bottom connecting) cast-iron
5540-0143-0005540-0081-001
Axle complete, length 60 mm 5505-0156-001Spare parts for pig drinkersValve casing including brass coupling piece ¾” 5540-0116-002O-ring 5500-0116-004Pushing pin
length 55 mm, for model 45length 85 mm, for model 46
5500-0116-0075500-0116-003
Stainless steel pushing spring, length 50 mm 5500-0116-002Dirt catcher 5505-0116-000Regulator for adjustment of the water pressure 5500-0116-001Complete valve
with short pin, for model 45with long pin, for model 46
5540-0116-0005540-0116-001
Complete valve with couplingwith short pin, for model 45with long pin, for model 46
5540-0116-0125540-0116-014
Fastening items and couplingsFastening nut 5500-0132-000Sealing ring, bag with 10 pieces 5540-0133-000S-shaped coupling, incl. sealing ring
15 mm½”
5540-0134-0005540-0138-002
Straight coupling, incl. sealing ringfrog 15 mm + swivel nut ¾”
frog ½” + swivel nut ¾”thylene 16 mm + swivel nut ¾”
5540-0158-0005540-0159-0005540-0120-003
Frog incl. sealing ring15 mm
½”5540-0136-0005540-0135-000
Swivel nut ¾” 5500-0137-000
Drinking bowls and nipple drinkers
Cattle drinker
Pig drinker Piglet drinker
Valve for building in
Drinker with float valve
01-05-2010
0122-000
0131-000
0126-0000127-000
0124-000
0123-000
0121-000
0116-001
0116-002
0116-000
0116-002
0116-0070116-003
0116-004
Cattle drinkers Pig drinkersl
Fastening items and couplings
Pushers0143-000 0081-001
0137-0000134-000
0138-002
0135-000 0136-0000133-000
0132-000
Drinker with float valve
www.brouwersequipment.com 33
Cattle drinkers ModelCattle drinker for fitting to wall, with synthetic pusher
½” thread, top-connected15 mm copper, top-connected16 mm thylene, top-connected
½” thread, bottom-connected15 mm copper, bottom-connected
5540-0066-0125540-0066-0085540-0066-0115540-0066-0005540-0066-009
Additional charge cast-iron pusher for horses (only suitable for connection at the bottom)Set of drinker brackets for fitting cattle drinkers to a tube
1½” (ø 48,0 mm)2” (ø 60,3 mm)
2½” (ø 76,0 mm)3” (ø 89,0 mm)
3½” (ø 101,0 mm)4” (ø 114,0 mm)
5540-0082-0135540-0082-0005540-0082-0055540-0082-0065540-0082-0085540-0082-011
Pig drinkersDrinking bowl with synthetic valve, high or low pressure, incl. ½” coupling (also available with 15 mm copper coupling or 16 mm thylene coupling)
for pigs, depth 16 cmfor piglets, depth 11 cm
5540-0045-0035540-0046-002
Valve for building in, high or low pressure, without lock nut and coupling, for fitting in existing drinkers model 40, with stainless steel cover 5540-0100-001Drinker with float valveDrinker with float valve, black enamelled cast-iron with stainless steel cover and ½” connection at the right 5540-3684-000Fastening bracket
for 1½” tubefor 2” tube
5540-0083-0005540-0083-001
Stainless steel drinker ModelStainless steel drinker with weight-operated seal, max. capacity 30 l/min at 5 bar (15 to 20 milk cows per drinker) 5540-2918-000Stainless steel duo-drinker with pushers and weight-operated seal (30 to 40 milk cows per drinker) 5540-2918-004Threaded strap M10 x 84 for pipe connection 1½” or 2” (4 pieces per drinker) 5500-9660-032Circulation unit with additional heating, consisting of: circulation pump (3 positions) approx. maximum pipe length 200 metres, heating spiral, thermostat, on/off switch, overflow valve and 1 meter of connection cable, the whole mounted on a stainless steel plate
3000 Watt, 230 V3000 Watt, 400 V
5540-3166-0005540-2919-001
Nipple drinkersStainless steel bite nipple, with adjustable water flow
for pigs < 25 kg, 3/8”, connection ½”for pigs < 75 kg, 1/2”, connecting ½”for pigs > 50 kg, 3/4”, connection ¾”
5540-2182-0005540-2182-0015540-2182-002
Hot-dip galvanised cast-iron fastening support, holes 62 mm centre to centre, ½” threaded top connection
for nipples 1/2” to wallfor nipples 3/4” to wall
for nipples 3/4” to 1¼” or 1½” tube
5540-2188-0015540-2188-0005540-2188-002
Push nipple ½” for wet feeder 5540-2184-000Spraying nipple ½” for fattening hogs and sows, with adjustable water flow 5540-2183-000Nipple drinker for cattle, high pressure, with adjustable water flow
for calves from 0-6 months, ½”for young stock and fattening stock, ¾”
5540-2185-0005540-2185-001
Drinking bowls and nipple drinkers
Roll-over stainless steel drinking troughs ModelRoll-over drinking trough for communicating system
capacity 100 litrescapacity 200 litres
for connection to a wall, capacity 100 litresfor connection to a wall, capacity 200 litres
5540-2921-0035540-2921-0015540-2921-0045540-2921-002
Roll-over drinking trough with float valvecapacity 100 litrescapacity 200 litres
for connection to a wall, capacity 100 litresfor connection to a wall, capacity 200 litres
between posts 123 cm c.t.c., capacity 100 litresbetween posts 223 cm c.t.c., capacity 200 litres
5540-2920-0105540-2920-0055540-2920-0115540-2920-0065540-2920-0125540-2920-008
Additional price for frost protector 5540-2925-015
Cows produce more milk when they can drink plenty of tasty water. Their trough should therefore be free of alga and other polution. The trough has to be cleaned on a regular basis, which is quite easy to do with a stainless steel roll-over drinking trough. The water connections are not liable to wear, which reduces the possibility of leakage. The arms are charged equally during emptying, operation without effort. The troughs are easily adjustable in height, by means of two bolts. No hinge points, but an always freely rolling movement. A circulation system is possible by means of two connections.
Roll-over stainless steel drinking troughs
2182
2183
2184
2185
Stainless steel drinker
Circulation unit
Stainless steel duo-drinker
Frost protector
01-05-2010
Grid scraper system
34 Tel. 0031-58-2911129
The grid scraper consists of a fully closed hot-dip galvanised frame with a soft rubber cleaning strip (vertical PU-rubber 6 mm, projecting ± 3 cm), which automatically adjusts to the right operating position for both directi-ons. The system operates like a large squeegee and is self-cleaning. The extra scrapers for the rear edge of the cubicles are fully width-adjustable.
Advantages Brouwers grid scrapersFlexible side scrapers, ensuring that less manure is carried along the • end of the passage.Self-cleaning construction.• Flexible rubber cleaning strips.• Works as a “squeegee”.• Hot-dip galvanised.•
There are various drive systems, which ensure a clever solution for all barns.
Steel cableThis system is inexpensive, easy to build in and very compact. Normally to be used for two passages with two grid scrapers.
Chain - steel cable combinationThis system is especially interesting for facilities where more than three scrapers are to be driven (for example when using a robot milker dividing the passages in the centre). Then only a chain will be used for the section that has to run via the drive, while a plastic-coated steel cable is used along the back.
Polyester ropeThis system is pre-eminently suited for passages of different length or even three passages. Application of the rope-based system has the fol-lowing important advantages:
The long service life of the rope (18 mm polyester compound, with a • breaking strength of 5.500 kg), together with the good repair and shorte-ning possibilities.Exceptionally cow-friendly.• Self-adjusting, no tightening necessary, so less maintenance.• Motors only 0,37 kW, geared to the actual load, which makes adjuste-• ment safer.Low scraper speed. For 1 45-metre barn 3,5 meter per minute maxi-• mally.
Hydraulic sliding rodThese systems can be relatively simple built-in in existing facilities, without requiring drastic structural alterations. The hydraulic sliding rod system is ideally suited for facilities with many relatively short passages, no matter whether there is an even or uneven number of passages. This system has the following outstanding advantages:
Well-rounded off rail, double-bent, for increased stiffness.• Standard with switching off timer.• Cleaning frequency adjustable per passage.• Number of cylinder strokes adjustable per passage (maximum protec-• tion or only stroke setting).Failure detection per passage. In the event of a scraper failure in a pas-• sage, the scrapers in the other passages continue to operate normally.Short damped cylinders.• Few electronic components in cylinder assembly.•
01-05-2010
Grid scraper system
www.brouwersequipment.com 35
Grid scraper system with steel cable drive ModelDrive unit on vertical frame, to be supported to the wall, incl. guard, fully closed three-phase motor 0,25 kW, 230/400 V, 50 hz, attached gear box, traction sheave, two steel cable sheaves and automatic tensioned 5505-5504-015Switch box, to be connected to 3 x 400 V, 50 hz, automatic start by means of a built-in timer, built-in working hours counter, to be shut of by a special current measuring relay with a digital reading of the absorbed current, so you can read out how heavy the installation is running and adjust the shut down value somewhat higher 5560-5513-001Grid scraper of hot-dip galvanised steel, incl. anti-swing profile, pulling block for steel cable, tensioner and rubber side scrapers
for manure passage 200 cmfor manure passage 220 cmfor manure passage 250 cmfor manure passage 275 cmfor manure passage 300 cmfor manure passage 325 cmfor manure passage 350 cmfor manure passage 375 cmfor manure passage 400 cm
5560-5515-0165560-5515-0185560-5515-0205560-5515-0235560-5515-0255560-5515-0275560-5515-0295560-5515-0375560-5515-033
Corner wheel in frame, with steel cable sheave 5560-5508-001Guide profile to be placed at crossings etc. including fastening items 5560-5520-002Meter of 9 mm steel cable, with coating, flexible version, with high breaking strength
made to measureon a roll of 500 metres
5560-5525-0025560-5525-003
Mounting set for fastening steel cable to universal pulling block5560-5515-000
Drive pulley 5589-5430-003
01-05-2010
Grid scraper system with rope drive ModelHot-dip galvanised reel-type drive unit fitted to mounting post, frame to be supported to wall, incl. guards and 0,37 kW motor with chain drive
with square corner wheel (as shown)with corner wheel parallel to wall (not illustrated)
5560-5550-0455560-5550-052
Rear plate for drive unit (in situations where the drive unit cannot be placed against a sufficiently high wall)
top plate, height 137 cmbottom plate, height 125 cm
5560-5550-0105560-5550-014
Switch box of synthetic material, control through current measu-ring relay with automatic switch for automatic control with timer, including main switch, thermal cut-out and manual operation
for rope driven scrapers on grid floorsfor rope driven scrapers on solid floors 5560-5513-008
5560-5513-014Grid scraper of hot-dip galvanised steel, incl. anti-swing profile, pulling block for polyethylene rope and rubber side scrapers
for manure passage 200 cmfor manure passage 220 cmfor manure passage 250 cmfor manure passage 275 cmfor manure passage 300 cmfor manure passage 325 cmfor manure passage 350 cmfor manure passage 375 cmfor manure passage 400 cm
5560-5550-0325560-5550-0335560-5550-0345560-5550-0355560-5550-0365560-5550-0375560-5550-0385560-5550-0395560-5550-040
Guiding profile, to be placed at crossings etc., including fastening items 5560-5520-002Meter of 18 mm polyethylene rope 5560-5554-000Corner wheel in frame for rope, incl. fasteners 5560-5553-005Separate corner wheel
for rope drivefor steel cable drive
5589-5412-0075589-5412-003
Drive unit steel cable
Drive unit chain - steel cable
Drive unit polyester rope
Drive unit hydraulic sliding rod
Section grid scraper
125
30
Hydraulic sliding rod
Polyester rope
Chain - steel cable combination
Steel cable
corner wheel
drive system fitted to mounting post
level=0
scraper
300
440
220
220
level=0
level=0
level=0
220
220
220
300
drive system including tensioner
chain
cable
300
220
220
220
scraper
reel drivescraper
corner wheel
switch box + hydraulic pumpsliding rod scraper
cylinder assembly on grid floor
300
440
220
220
Manure removal systems
36 Tel. 0031-58-2911129
We provide a high-quality and efficient manure removal system for every kind of cubicle stall or feed cubicle stall. The heart of the system is the specially designed drive group. The cast steel corner wheels are provi-ded with double waterproof and greased ball bearings. The highly wear resistant 10 mm steel chain has a breaking strength of 5.800 kg. For every installation you can count on ample advice and detailed drawings.
Investing in Brouwers manure removing equipment is opting for reliability based on 30 years’experience. Advantages:
No slurry storage in the barn (better barn climate).• Slurry mixed outside the barn.• Lower building costs.• Cows can be given straw beddings.• Possibility of separate slurry storage.•
Features folding scrapersSmoothly running.• Adequate cleaning through pinching and scraping effect.• Capable of handling straw of any size.• Less disturbance for cattle, because the scraper blades are placed at • an angle and practically fully fold up in the return run.Optional with rubber strips for even better cleaning.• Blades follow the floor independently of each other.•
Features combi scrapersOperating run starts immediately.• Hinged side blades ensure optimum cleaning of sides of passage.• Tilting blades follow the floor independently of each other.• Suitable for flat as well as sloping floors.• Standard with soft rubber cleaning strips.• Effective and efficient cleaning.• Not for unchopped straw.•
Den Boer Beton and Brouwers Equipment have, in co-operation with IMAG-DLO, developed a low-emission floor manure scraper system. With this grooved floor system, emission reductions of up to 50% can be achieved. The grooved floor system consists of a closed, flat floor provi-ded with grooves and an adapted manure scraper. The newly developed floor elements are provided with grooves running parallel with the feed alley. The liquid manure is removed to the underlying slurry pit via the grooves and the discharge holes. The solid manure is carried off to the ends of the passages by means of a manure scraper. The scraper blade of the manure scraper is adapted to clean the grooves. Because the slurry pit is closed and the liquid manure is being quickly removed, the emission of ammonia reduces substantially. Detailled information on application.
Day after day, the circular chain manure removal systems prove their reliability, not only in cow houses but also in pig farming, slaughterhouses, the horse breeding industry etc. Prices and technical specifications on application.
AdvantagesAdvice and guidance, templates, drawings etc.• Parts subject to wear are replaceable.• Low-maintenance.• Long life.• Reliable.• User-friendly.•
Low-emission grooved floor system
Chain manure removal system
01-05-2010
Manure removal systems
www.brouwersequipment.com 37
Components drive system Model
Drive group on vertical frame, to be supported to wall, motor reductor 0,55 kW, 3 x 400 V, 50 Hz, incl. pocketed sheave, frame hot-dip galvanised, with two guide wheels, of which one turned 90º including tensioner
Suppl. for steel guide wheels with slide bearings and shafts
Drive group with three-phased motor 0,55 kW, 220/380 V, 50 Hz, reduction gearbox, pocketed sheave, on hot-dip galvanised frame, with guide wheels and foundation plate for fitting to floor 5505-5489-038
Switch box, to be connected to 3 x 400 V, 50 Hz, Automatic start by means of a built-in timer, built-in working hours counter, to be shut off by a special current measuring relay 5560-5513-004
Manually operated control box 3 x 400 V, 50 Hz, automatic swit-chin over/off by means of current measuring relay 5560-5494-000
Timer for folding scraper system 5560-5493-000
Heavy-duty corner wheel in frame, on foundation plate with anchor bolts, including hot-dip galvanised guard
with spring housing, leftwithout spring housing, left
with spring housing, rightwithout spring housing, right
5560-5480-0185560-5482-0045560-5481-0055560-5482-006
Suppl. for steel guide wheel with slide bearing and shaft
Meter of highly wear-resistant 10 mm chain, specially hardened for this application 5505-0310-000
Junction link with bush bolt 5560-5497-001
Guide profile iron 50 x 50 x 3, with welded-on concrete anchors and coupling pieces, to be cast-in in passages, serving as chain guide, in lengths of 6 metres 5560-5478-008
Tensioning equipment, for tensioning chain 5560-5492-000
Meter of covering strip, hot-dip galvanised steel, for chain guide profile 5560-5478-006
Folding scrapers
Sheet steel folding scraper with PVC guide wheels, pulling block including chain tensioner for U-section
manure passage width 200 to 218 cmmanure passage width 219 to 236 cmmanure passage width 237 to 262 cmmanure passage width 275 to 293 cmmanure passage width 294 to 320 cmmanure passage width 321 to 340 cm
5560-5495-0365560-5495-0395560-5495-0425560-5495-0455560-5495-0485560-5495-051
Additional charge for rubber cleaning strip, incl. clamping plate, for existing scrapers, with mounting plate
manure passage width 200 to 262 cmmanure passage width 263 to 340 cm
Additional charge for rubber cleaning strip, incl. clamping plate, for new scrapers
manure passage width 200 to 262 cmmanure passage width 263 to 340 cm
Combi scrapers
Combi scraper with self-adjusting blades, side flaps proveded with rubber cleaning strips, scraper hot-dip galvanised, including pulling block for U-section
manure passage width 200 cmmanure passage width 220 cmmanure passage width 250 cmmanure passage width 275 cmmanure passage width 300 cmmanure passage width 325 cmmanure passage width 350 cmmanure passage width 400 cm
5560-5496-0585560-5496-0605560-5496-0625560-5496-0645560-5496-0665560-5496-0685560-5496-0705560-5496-074
Additional charge pulling block with anti-swing profile
Spare parts
Dive (pocketed) sheave 10 mm. In case 30 links have a length of less than 92 cm you use a standard sheave. With a length of 92 to 97 cm you use an oversized sheave
standardoversized
5505-5489-0015505-0118-000
Guide wheel including bearingsfor corner wheel, with 90 mm bolt
for drive, with 160 mm bolt5560-5487-0055560-5487-006
Steel guide wheel including slide bearing, shaft and bearing discs 5560-5487-009
01-05-2010
Rubber flooring for walking alleys
38 Tel. 0031-58-2911129
Research shows that claw and leg injuries are very common with milking cows. From the economical point of view, concrete is an attractive flooring material. However, it does not seem to offer a cow much in the sense of well-being. It appears that cows prefer a floor which gives them grip if the claws can impress the material.
Het loopgangrubber is opgebouwd rondom een ingevulkaniseerd weef-sel. The rubber flooring has a built-in texture. Together with the specially formed burls underneath, the total thickness of the flooring is 18 mm. Be-cause of those burls, the mat can be well impressed by the cow’s claws.
The weight is 14 kilo per square metre. The used rubber is 90% rubber, only up to 10% is regenerate. This guarantees the mechanical strength and conservation of the flexibility.
The rubber flooring is available in widths from 1 m up to 3 m increasing by 10 cm.
A large advantage of the mat is that it can be supplied on rolls up to a width of 3 metres and a total length per roll of approx. 50 metres. This makes it easy to keep the mat in place and it prevents the scraper from getting stuck. In practice it is very easy to fasten. The surface ot the mat has a profile that has been developed in practice. Its purpose is to let the grid scraper installation and the rubber flooring work together optimally.
Soft rubberExperiences, especially in the United States and Canada, are very po-sitive about soft walking rubber. Rubber mats that are too hard seem to have even an inverted effect. The possibility to impress the mat demands special features as to the construction and materials. The desired softness may not lead to a decrease in durability. A way to lower the price level is the use of recycled rubber, by wich there often have to be made conces-sions concerning the mechanical strength.
FasteningFastening in length direction, only at the side where the two mats are coming to lay against each other. Always keep 1 cm of dilatation space on the sides with regard to the concrete. Middle fastenings every 1 metre centre to centre by means of a hammer screw and washer. Keep the screws at least 15 cm from the edge. At the ends of the walking rubber the burls have to be grinded off over a width of 6 mm. Then fasten the rubber with a stainless steel strip, in such a way that scrapers can run freely, without stucking at the edges.
Rubber flooring for walking alleys ModelMeter of burled rubber for walking alleys, supplied on rolls, thickness 18 mm (13 mm of mat with built-in texture and 5 mm of burls), with hammer-blow surface
width 100 cmwidth 200 cm
5520-3509-0095520-3509-027
Fastening materialsStainless steel hammer screw with plug 8 mm, length 80 mm 5520-0503-005stainless steel washer 8,4 x 25 5500-8000-154Stainless steel fastening strip, width 45 mm, length 3 m 5520-3524-000Fastening strip complete with plug/screw 5520-3524-007
Eisele auger mixers
In view of its many advantages, the auger principle has been consciously opted for. The auger rotates in a tunnel through the casing, thus producing even more thrust. Unlike a screw mixer, the auger mixer can never get blocked by forage residues. The mixer operates on the priming principle, pullinig itself fast in the opening of the retaining wall. The mixer can be adjusted for operation in two directions of rotation by means of an easy to fit gearbox. This may be the right solution in difficult situations.
Mixer provided standard with auger positioning system
Double acting gearbox model 5802.D
01-05-201008
Eisele auger mixers
www.brouwersequipment.com 39
Advantages Eisele auger mixersLarger pumping action.• Higher output.• Cannot get blocked.• Requires less power.• Provided with ball bearings.• Drive shaft runs in oil bath.• Wear-resistant oil bath sliding ring sealing.• Hot-dip galvanised mixer frame and auger tunnel.• Tiltable in adjustable three-point linkage.• May run dry.•
Tiltable in three-point linkageOwing to the tiltable suspension in the three-point linkage the mixer can be easily slid into the mixer frame. When the mixer is hung over the guide rails, the locking device can be easily released, allowing the mixer to tilt into the guide rails. The tractor can then slide the mixer into the frame wit-hout any further operation being required. The stock farmer even doesn’t have to leave the tractor. Removing the mixer from the pit can be done equally easy.
Slalom systemThe huge pumping acting of our auger mixer makes it pre-eminently suited to be used in a slalom system. However, as certain drawbacks attach to the application of these systems, we would like to advise you per indivi-dual case.
PTO-driven auger mixers ModelAuger mixer 450 cm, 45 kW (60 hp)
standarddouble-acting
without mixer tunnel, with thrust augerwithout lifting frame
5560-5800-0185560-5800-0265560-5800-0295560-5800-030
Auger mixer 500 cm, 45 kW (60 hp)standard
without lifting frame5560-5800-0195560-5800-021
Electrically-driven auger mixersAuger mixer with 15 kW (20 hp) electric motor, including V-belt transmission and guard, excluding support
length mixer tube 500 cmlength mixer tube 550 cm
5560-5800-0025560-5800-004
Star-delta switch 20 hp, hand-operated, excluding connectinig cable 5560-5803-044Automatic switch box with timer, excluding connecting cable 5560-5803-046Fitting for auger mixersSteel frame, dimensions 70 x 70 cm
for setting in brick retaining wallfor casting in between formwork 20 cm
5560-5801-0005560-5801-010
Set of guide railsfor pits up to 200 cm, length 340 cm
for pits deeper than 200 cm, length 450 cmfor pits deeper than 200 cm, length 550 cm
5560-5801-0185560-5801-0115560-5801-020
Mounting bracket for guide railsfor pits up to 200 cm
for pits deeper than 200 cm5560-5801-0035560-5801-004
Support permanently placed mixer 5560-5802-000Double-acting gearbox, for pulling and pushing 5560-5802-001Couple shaft on one side adjustable at wide angle 5560-5851-000Mechanical seal
Electrically-drive thrust mixer
Mixer for pits without channels, model 5800.60R
01-05-2010
Eisele electric submersible agitators
40 Tel. 0031-58-2911129
The submersible agitators have been designed for mixing any kind of manure, of cattle, pigs as well as poultry, in manure pits, channels and silos and deal with straw and feed residues without problems. It derives its impressive mixing power from the specially constructed propeller. The propeller has been designed so that at a relatively low speed it keeps the manure moving. Priming, pressing and agitating all at the same time, the submersible agitator turns the manure into a swirling mass. In a short time, an enormous amount of manure can be agitated and mixed.
Advantages of silo agitatorsFast and easy mixing.• No need for using tractor or pump.• Suitable for all types of manure (also poultry manure).• Adjustable agitating direction (horizontal and vertical).• No structural measures required.• Can be built-in in silos that already contain manure.•
Thermal protectionThe 3-phase motors are protected thermally against overloads by means of “klixon” switches. Therefore, overloading for a short time does not present any problems. The agitator can be restarted when it has cooled down, when the cause of the overload has been traced.
Electric submersible agitators in roofed silosWhen using submersible agitators in roofed silos, it is advisable to keep the opening in the roof sufficiently large. The recommended dimensions of the opening have been specified below:
2,2 up to 4,0 kW, width 140 cm, length from edge of silo 90 cm.• 5,5 up to 7,5 kW, width 190 cm, length from edge of silo 90 cm.• 11,0 up to 15,0 kW, width 230 cm, length from edge of silo 120 cm.•
Mobile submersible agitatorsThe mobile submersible agitators have a compact frame and only need a minimal pit opening. The models 5800.V03 and 5800.V55 are particularly suitable to mix pig manure in hard to reach pits. Model 5800.V55 can also be used for cattle manure.
Submersible agitator 2,2 kW, minimal pit opening 50 x 30 cm, pit depth • up to approx. 1,1 metres, extendable up to max. 2,2 metres.Submersible agitator 4,0 kW, minimal pit opening 50 x 50 cm, pit depth • up to approx. 2,6 metres, extendable up to max. 4,8 metres.
Channel systemsSubmersible agitators can be compactly built-in in channel systems, without needing mixing pits. Mixing on a regular basis is prerequisite in these systems.
Hydraulic agitatorsOn application we can also supply agitators for building on a hydraulic cranes. The hydraulic agitators have a specially designed blade ensuring a large driving power.
Technical specifications electric submersible agitatorsModel Capacity Blade speed Propeller
diameterThrust Nominal
currentWeight Fuse
cartridgesOil check probe
5560-5800-062 4,0 kW 600 rpm 370 mm ap. 700 N 7,8 A ap. 85 kg 16 A +5560-5800-070 5,5 kW 470 rpm 460 mm ap. 1.100 N 10,9 A ap. 160 kg 25 A +5560-5800-035 7,5 kW 470 rpm 490 mm ap. 1.500 N 15,2 A ap. 160 kg 25 A +5560-5800-053 11,0 kW 240 rpm 690 mm ap. 2.500 N 21,2 A ap. 260 kg 35 A +5560-5800-057 15,0 kW 240 rpm 820 mm ap. 3.500 N 28,9 A ap. 260 kg 35 A +The data are based on measurements in water. Standard connected to the electric system by means of a five-core cable. Four-core cable on application. Direct switching up to 4 kW.
01-05-2010
Agitator 4 kW
Agitator 5,5 - 7,5 kW
Agitator 11 - 15 kW
Agitator for vertical building-in
Eisele electric submersible agitators
www.brouwersequipment.com 41
Submersible agitators without accessories ModelElectric submersible agitator with 8 metres of cable, switch box incl. CEE socket and safety
4,0 kW5,5 kW7,5 kW
11,0 kW15,0 kW
5560-5800-0625560-5800-0705560-5800-0355560-5800-0535560-5800-057
Heavy-duty electric submersible agitator, 7,5 kW, with special seal, oil checking device, two-component coating and 8 metres of cable, exclusive of switch box, with stainless steel anti winding blade 5560-5800-041Switch box with star-delta switch, motor protection relay, mini-mum voltage protection, oil level indicator lamp, CEE socket, 32 Amp. (five-pole) 5560-5803-041Submersible agitators for building in silosElectric submersible agitator on carrier, complete for building in in a silo 500 cm high, including bottom bearing, vertical guide, at-tachment with lock, lifting mechanism with self-locking winch and stainless steel cable, 8 metres of cable, switch box and guard
5,5 kW7,5 kW
11,0 kW15,0 kW
5560-5800-1065560-5800-1075560-5800-1085560-5800-109
Additional or discount charge per 50 cm for higher or lower silosfor D55, D75 and D10
for D15 and D20Agitators with stainless steel componentsElectric submersible agitator for a silo of 500 cm, with stainless steel guide and carrierMobile submersible agitatorsMobile submersible agitator
pit depth up to 1,1 metres, 2,2 kWpit depth up to 2,6 metres, 4,0 kW
5560-5800-0855560-5800-086
Extension piece, length 1,1 metresfor agitator 2,2 kW (max. 1 piece )for agitator 4,0 kW (max. 2 pieces)
5560-5803-0735560-5803-074
Submersible agitators for channel systemsAgitator for building-in on guide rails, on drum carriage, for frame 70 x 70 cm, including lock, 8 metres of cable and manually opera-ted switch box, without frame, guiding rails and mounting bracket 5560-5800-000Agitator for vertical building-in, on drum carriage, max. pit depth 250 cm, incl. vertical guide frame, 8 m of cable and manually operated switch box
7,5 kW, for mixer opening 70 x 70 cm15,0 kW, for mixer opening 90 x 90 cm
5560-5800-0885560-5800-092
Seperate manually operated switch box 5560-5803-041Switch box with seal controller, timer and automatic star-delta switch (manually operated box lapses) 5560-5803-060Steel frame, dimensions 70 x 70 cm
for setting in brick retaining wallfor casting in between formwork 20 cm
5560-5801-0005560-5801-010
Set of guide railsfor pits op to 200 cm, length 340 cm
for pits deeper than 200 cm, length 450 cmfor pits deeper than 200 cm, length 550 cm
5560-5801-0185560-5801-0115560-5801-020
Mounting bracket for guide railsfor pits up to 200 cm
for pits deeper than 200 cm5560-5801-0035560-5801-004
01-05-2010
Agitator on guide rails
Mobile agitator 7,5 kW
Mobile agitator 2,2 kW
Eisele vertical slurry pumps
42 Tel. 0031-58-2911129
The ideal pump for total slurry handling. Designed for the toughest and most difficult conditions. This pump mixes, chops and pumps the thickest slurry containing straw and forage residues. Ideally suited for large-scale slurry handling in cubicle houses and in facilities where thick manure is produced, for example in the bulle fattening industry and in accommoda-tions for young stock. Whthout circulation pipes, if desired mounted on a movable frame, also widely applied in large open or closed slurry pits and pits for storing poultry manure, of laying hens as well as table poultry with heavy feathering.
Advantages Eisele vertical slurry pumpsMay run dry.• Can cope with stones, pieces of iron, etc.• Provided with a reliable chopping mechanism.• Supplying high pressure, up to 4,5 bar.• Impeller infeed from the top.• Large capacity and exceptionally long service life.• Suitable for pit depths up to 500 cm.• Rise tube and operator in stainless steel.•
Spray-agitating systemAn essential element of the pump is the attached spray-agitating system. This makes it possible to homogenise the slurry up to a distance of ap-prox. 15 metres from the pump, ensuring that all slurry can drift to the pump. The cast-iron three-way cock is easy to operate, enabling you to switch from agitating to pumping rapidly.
AugerThe heart of the pump is the cast-iron heavy-duty impeller, which is inte-graged into the auger. The auger is equipped with a welded-on Widia-staal cutting blade. Between the auger and the extra high cast-iron counter ring, all straw and forage residues are chopped. When the pump is running, the cutting blade passes the counter ring one hundred times per second. This makes the slurry injection process a great deal easier, faster and, consequently, cheaper!
Complete vertical slurry pumps ModelVertical slurry pump, without coupling shaft, for pit depths from 150 to 200 cm
PTO driven, 33 kW (45 hp), capacity 4.500 l/minPTO driven, 52 kW (70 hp), capacity 8.000 l/min
electric motor, 11 kW (15 hp), capacity 2.700 l/minelectric motor, 15 kW (20 hp), capacity 3.300 l/min
5560-5815-0105560-5810-0075560-5810-009
Additional charge per 50 cm pit depthSeparate vertical slurry pumpVertical slurry pump, without gear box and accessories, for pit depths from 150 to 200 cm
55 kW (75 hp), capacity 8.000 l/min 5560-5817-001Drive unitsGear box, 540 rpm 5560-5813-000AccessoriesMovable underframe, suitable for all pumps mentioned, with hand-operated winch and take-off frame, suitable for the three-point hitch of the tractor 5560-5850-000Pump mounting bracket on pit cover 5560-5856-001Coupling shaft with break pin protection 5560-5851-003
Three-way cock
Pump house with chopping mechanism
01-05-2010
6060
8080
Eisele lobe rotor pumps
www.brouwersequipment.com 43
Solidly constructed and easily detachable, the Brouwers-Eisele lobe rotor pump can be used for a wide range of applications. It can be used in vari-ous locations. Special access pits are not required. It is perfectly suited for pumping over large distances and also for raining manure. Incorporating many advanced technical features, this pump is built to run for hours on end.
Advantages Eisele lobe rotor pumpsQuiet, vibration-free, stable operation, owing to the application of three-• lobe rotors.Constant output, also when handling thick manure.• Rotors provided with highly flexible coat. The toughness and film thick-• ness of this coat reduce damage to a minimum.Large ball passage and this minimising blocking risk.• Quickly detachable pump house. Low-maintenance and user-friendly.• The pump house and the front cover are provided standard with re-• placeable wearing plates.Quickly removable rotors; bearings and seals are kept in place.• Owing to the heavy-duty one-sided bearing system only two instead of • four seals are required.Shaft sealing by means of labyrinth rings, with oil-lubricated hard metal • sliding ring seals. This construction makes for a long service life.
Slurry rainingEspecially the lobe rotor pump model 5855.DK12 is very suitable for raining slurry. Pumping slurry under high pressure over large distances is precisely the area of application this model caters for. At very high pressu-res, the three-lobe rotors provide less pulsation and ensure a quiet pump operation, which are the determining factors for the service life of seals, couplings, pipes and the raining system.
Lobe rotor pumps ModelPTO-drive lobe rotor pump, complete with hot-dip galvanised lifting frame, replaceable wearing plates, coupling shaft (Walter-scheid) with break pin protection, suction and delivery bend with M-parts or F-parts, inspection glass and membrane diaphragm manometer
48 kW, max. capacity 240 m³/h33 kW, max. capacity 150 m³/h28 kW, max. capacity 90 m³/h
5560-5855-0145560-5855-008
PTO-driven lobe rotor pump, without under-frame and acces-sories, for slurry tankers
64 kW, max. capacity 360 m³/h48 kW, max. capacity 240 m³/h
5560-5855-0175560-5855-016
Electrically driven lobe rotor pump on foundation frame, with coupling, guard, suction and delivery bends, inspection glass, manometer and motor reductor /660 Volt 50 Hz
7,5 kW, max. cap. 36,0 m³/h at max. 4 bar pressure11,0 kW, max. cap. 38,5 m³/h at max. 8 bar pessure7,5 kW, max. cap. 66,0 m³/h at max. 2 bar pressure
11,0 kW, max. cap. 66,0 m³/h at max. 3 bar pressure
Cross-section lobe rotor pump1 = draw/press side2 = rotors with a thick flexible coat3 = pump house
01-05-2010
Lobe rotor pump 48 kW
11
2
23
Lobe rotor pump for slurry tankers
Eisele electric pumps
44 Tel. 0031-58-2911129
Eisele electric immersion pumpsBesides pumping all kinds of manure, this kind of pump is suitable for various industrial applications. The pumps with chopping mechanism prevent blockages. The pumps are sturdy and amply dimensioned, thanks to the own fabrication of the built-in electrical motors. Thermally protected by means of built-in micro switches. This is the best protection, allowing the pump to be maximally overloaded. Motors 380/660 Volt, 50 hz, IP68, 1.450 tpm.
Hoses ModelFlat rollable hos, per metre
rubber delivery hose, 125 mmsynthetic transport hose, 125 mm
rubber delivery hose, 153 mm
5560-5862-0015560-5862-0025560-5862-006
Suction hoselength 300 cm, 125 mmlength 400 cm, 125 mmlength 400 cm, 152 mm
5560-5862-0035560-5862-0045560-5862-007
Connection piece for suction pipe 125 mm 5560-5867-000Hose clipsHeavy-duty hose clip
131-140, for delivery hose 125 mm134-148, for suction hose 125 mm148-162, for delivery hose 152 mm162-176, for suction hose 152 mm
5560-5863-0025560-5863-0045560-5863-0065560-5863-007
E-pumpAn immersion pump for the removal of rinse water from milking parlours. Pump and impeller made from stainless steel. Large ball drain (35 mm). Shaft sealing by means of a double mechanical seal. Motor with built-in overload protection. A pump hole of 60 x 60 cm with a depth of 48 cm is optimal.
Eisele elctric immersion pumps ModelImmersion pump with electric motor, with 8 metres of acid-resistant cable, without accessoires
3,0 kW4,0 kW5,5 kW7,5 kW
with chopping mechanism, 5,5 kWwith chopping mechanism, 7,5 kW
5560-5880-0125560-5880-013
5560-5880-0065560-5880-000
Pump base 5560-5880-007Switch box for direct switching-on, with motor safety relay, low voltage protection, oil level indicator lamp and CEE socket (five pole), for 3 and 4 kW pumps 5560-5803-043
E-pump ModelWater-jet pump with electric motor 230 Volt, capacity 240 l/min, complete with float valve, 5 metres of cable incl. plug, knee with worm pipe and hose clip 5560-5885-002
E-pump
Accessories for slurry pump
F-parts ModelStraight F-part
threaded ring 125, 333PVC-connection 160, 159PVC-connection 160, 133
5560-5870-0005560-5871-0005560-5872-001
Cut-off valvesSliding cut-off valve
with spindle and hand-wheelwith lever
5560-5888-0095560-5888-010
Extension piece for spindle100 cm150 cm200 cm
5560-5889-0015560-5889-002
End-dose cut-off valve, diameter 315 mm 5560-5890-001Operating bars for end-dose cut-off valve, 150 cm 5560-5892-000Brass sliding cut-off valve 6” incl. flanges, PVC brushes and sealing rings 5560-5893-002Pull bar for sliding cut-off valve 5560-5893-006Handle for sliding cut-off valve 5560-5893-004
01-05-2010
F-part Sliding cut-off valve End-dose cut-off valve Brass sliding cut-off valve
Biogas installations
www.brouwersequipment.com 45
Eisele self-drawing pumps modelSelf-drawing pump incl. star-delta switch (5,5 and 11,0 kW), CEE connector, plug and 3 metres of suction pipe
4” F-part, 2.100 l/min, 5,5 kW4” F-part, 2.660 l/min, 11,0 kW 5560-5840-000
Together with sister organisation Brouwers Equipment, Brouwers BioEnergy is a part of the Wilaard group. Brouwers BioEnergy BV has been active as a “turn-key” builder of biogas installations for a couple of years now. This has resulted in a number of innovative biogas installations in the Netherlands and Belgium, with capacities varying between 340 and 1450 kWel.
Brouwers BioEnergy BV realises those installation in co-operation with a number of partners, each of them specialist with a large amount of experience in their own field. Brouwers BioEnergy BV combines its own knowledge an experience in the agricultural field with this specific techni-cal knowledge of its partners. Some of them already built complete biogas installations in for instance Germany for a large number of years. If you consider to invest in a biogas installation, Brouwers BioEnergy would like to put this knowledge and experience to your disposal, in order to make a well balanced judgement if and in what way this will be a suitable and profitable solution in your specific situation. Even after delivery Brouwers BioEnergy stays concerned, in order to ensure an optimal result of your installation. Our process technologist will be happy to contribute.
Should you be interested to evaluate the possibilities for your farm,together with our specialist, please contact us.
Eisele self-drawing pumpsSelf-drawing pump without chopping mechanism, particularly suitable for thin pig manure, liquid manure or dirty water. Double ceramic seals in oil bath, may run dry. Clog-free open impeller. Built-on manually operated one-way valve, including built-on motor switch.
Eisele self-drawing pumps
01-05-2010
Fastening items
46 Tel. 0031-58-2911129
Concrete anchorsThe grade of concrete determines the type and size of anchors to be used. If the concrete grade cannot be established and/or at a limited edge distance (15 cm) injection achoring is most reliable. When using a torque spanner, you ensure that the maximum torque is not exceeded. Always reed and follow the instructions on the packaging.
01-05-2010
Hexagon bolt Coach screw Carriage bolt Wedge bolt
ApplicatorConcrete anchor bolt
Wedge anchor bolt
Trough-feed anchor Threaded rod
B B9630
96609660
C CA A
Concrete anchors ModelGalvanised concrete anchor bolt with nut
dim. M10 x 90 mmdim. M12 x 78 mmdim. M12 X 111 mm
5580-1219-0005580-1219-0025580-1219-009
Galvanised wedge anchor bolt with nutdim. M10 x 109 mmdim. M12 x 120 mm
5580-1219-0015580-1219-011
Corrosion-resistant through-feed anchorhole 12 mm, L = 115 mmhole 16 mm, L = 110 mmhole 18 mm, L = 120 mm
5580-1219-0185580-1219-019
Injection anchoringTube two-component synthetic resin mortar, contents 345 ml, incl. 2 mixing sprouts with adapter 5580-1219-022Heavy-duty applicator for mortar cartridges, also suitable foruse of standard cartridges (single) 5580-1219-020Mixing sprout with adapter 5580-1219-021Bellows for making holes dust-free 5580-1219-017Threaded rod with washer and nut, zincrolyte
M12 x 160M16 x 190
5580-4502-0025580-1219-014
Mounting clamps ModelMounting clamp
¾”1”
1¼”1½”
2”2½”
3”3½”
4”
5530-9630-0005530-9630-0015530-9630-0115530-9630-0025530-9630-0035530-9630-0045530-9630-0055530-9630-0065530-9630-007
Threaded strapsThreaded strap (A x B x C)
1” , 70 x 10 x 34 mm1¼”, 80 x 10 x 42 mm1½”, 71 x 10 x 48 mm
2'’, 102 x 10 x 60 mm2½”, 112 x 12 x 78 mm
3”, 125 x 12 x 98 mm3½”, 135 x 12 x 101 mm
5500-9660-0135500-9660-0215500-9660-0255500-9660-0385540-9660-0075500-9660-0445500-9660-047
Bolts ModelGalvanised hexagon bolt with nut
ø 10 mm, L = 30 mmø 10 mm, L = 40 mmø 10 mm, L = 50 mmø 10 mm, L = 60 mmø 12 mm. L = 35 mmø 12 mm, L = 40 mmø 12 mm, L = 50 mmø 12 mm, L = 60 mmø 12 mm, L = 70 mmø 12 mm, L = 80 mmø 12 mm, L = 90 mmø 12 mm, L = 100 mmø 12 mm, L = 120 mmø 12 mm, L = 140 mmø 12 mm, L = 160 mmø 16 mm, L = 90 mm
5500-1210-0425500-1210-0465500-1210-0485500-1210-0015500-1210-0885500-1210-0915500-1210-0935500-1210-0955500-1210-0975500-1210-1005500-1210-1045500-1210-1085500-1210-1105500-1210-1155500-1210-1195500-1210-135
Hot-dip galvanised coach screwø 8 mm, L = 50 mmø 8 mm, L = 60 mmø 10 mm, L = 70 mm
5500-8000-1265500-1211-0055500-1211-009
Galvanised carriage bolt with hexagon nutø 6 mm, L = 50 mmø 6 mm, L = 70 mmø 8 mm, L = 30 mmø 8 mm, L = 50 mmø 10 mm, L = 35 mmø 10 mm, L = 50 mmø 10 mm, L = 70 mm
5500-1212-0015500-1212-0035500-1212-0095500-1212-0145500-1212-0265500-1212-0305500-1212-034
Wedge boltdim. 10 x 80 x 50 mmdim. 12 x 120 x 80 mm
5500-1214-0005500-1214-001
WashersLarge hot-dip galvanised washer
13 x 50 mm ø19 x 56 mm ø
5500-1217-0015500-1217-000
Nylon plugNylon plug
8 mm10 mm12 mm
5500-1218-0015500-1000-2065500-1218-003
StudsStainless steel stud
10 mm12 mm
5500-1208-0055500-1208-006
Stainless steel hexagon nut10 mm12 mm
5500-1000-1295500-1200-076
E-brush®
www.brouwersequipment.com 47
E-brush® Model €E-brush® complete, for wall fixing, 230 V / 50 Hz 5580-2201-002 1.380,00
The E-brush® makes it easy for cows to clean themselves and release them from dirt and parasites. It will make cows feel good. As their well-being improves, they are less susceptible to stress and are more resistant to infections and thus are healthier. And, after all, a healthy cow is a pro-fitable cow. By using the E-brush® the blood circulation will improve and give cows a healthier skin. The E-brush® is ideal for hard to reach places, such as head, back and tail implant.
NewThe familiar Brouwers Equipment E-brush® has ben adjusted at several points. The most radical change concerns the adjustment of the drive. Where the old brush was driven by a chain transmission, we chose a direct drive of the brush in the new construction. The brush is now directly fixed to the shaft of the drive. However this is done in such a way that only the drive forces find their way to the brush-shaft fastening. The oblique forces the cows exercise to the brush normally don’t reach the fastening.
In the new construction the brush can be tilted upward. The basic position has also been kept horizontal, with reason, to be able to efficiently clean the back of the cows. The brush has a new starting mechanism that con-stantly changes the sense of rotation. Because the brush hairs are now being charged evenly on both sides, the brushes will last much longer as the hairs stay upright.
The drive part now leaves the factory completely mounted. When placing the E-brush® in the barn you only have to slide the brushes onto the shaft and secure them. The brush set is delivered in two boxes. One box with the complete drive part and the brushes plus manual in the second box. During mounting in the factory each brush drive gets a trial run and also the rotation mechanism is being tested.
The drive motor is only 120 W, which makes it quite simply securable against overloads. Connection tenstion European 1 x 230 V, 50 hz. Other tensions on demand. The motor is supplied with a temperature protection. Switching on is completely electronic without mechanical contacts. The brush will start when it is being touched by the cows and will switch off automatically when it is not being movoed for a certain period of time.
Part of the standard delivery are two cross profiles that can be fixed on the upper and lower side of the back frame for additional stability. The back plate has a broad hole pattern, which makes it possible to fix the brush to vertical tubes of different measurements (2”, 2½”, 3”, 3½” en 4”) by using threaded straps (not included).
Next to claw care, the cattle crush can be used for the other recurring treatments. With the cattle crush you can treat a larger amount of animals quickly and effectively or efficiently and safely treat individual animals.
The cattle crush is standard equipped with:
Slowing winding tool for the hind legs as well as the belt, secured • against moving back.Roller running in bearings for the rope around the hind legs.• Chain to lock the cow in from behind.• Nylon heel strap to wind up the hind leg.• Wooden floor.• Frame hot-dip galvanised.•
Cattle crush ModelCattle crush, without front leg supports
standard modelwalk-through model
5580-6480-0025580-6480-004
Set of two front leg supportsstandard set
luxury set with winch5580-8695-0115580-6482-001
Set of rubber wheels for internal transport 5580-6481-003Auxiliary axle with large wheels (incl. fastening items) 5580-8695-007
Cattle crush
01-05-2010
Standard front leg supportFront leg support 8695.BR06
Livestock care
48 Tel. 0031-58-2911129
Allflex ear tags Model
Unnumbered ear tag (white, yellow, organe, blue or green), in series of 20 pairs, price per pari
small-small(not in white) sheep-sheep
small-juniorjunior-juniorsmall-senior
senior-senior(only in yellow) small-maxi
2611262126432641266326612673
Numbered eart tag (yellow with black figures), in series of 20 paris, price per pair (junior till no. 1.000 on stock, the others on demand)
small-juniorjunior-juniorsmall-senior
senior-seniorsmall-maxi
26422640266226602672
Applicator total tagger, for all ear tag sizes, with additional perforating pin 5580-2695-000
Automatic applicator, for all ear tag sizes 5580-2694-000
Separate perforating pinfor total-tagger
for automatic applicator5580-2697-0005580-2697-001
Black marker for Allflex ear tagswith broad tip
with fine tip5580-2696-0005580-2696-001
Floor scrapers
Bowed floor scraper, width 66 cm, with supple, wear-resistant and two-sided useable rubber strip, galvanised finish, with clam-ping bush to attach to a handle (not included) 5580-2396-000
Single rubber strip with holes, width 66 cm, for bowed floor scraper 5580-2394-004
Straight floor scraper, with supple, wear-resistant and exchange-able rubber strip, hot-dip galvanised, without handle
width 40 cmwidth 54 cm
5580-2389-0005580-2390-000
Single rubber strip, with holes, for straight floor scraperwidth 40 cmwidth 54 cm
5580-2391-0005580-2391-001
Nylon ribbons and cow chains
Heavy duty nylon ribbon with hot-dip galvanised link bucklelength 110 cmlength 135 cm
5510-2015-0005510-2015-001
Heavy duty nylon ribbon with sewed-on grey leather and hot-dip galvanised round pin buckle
length 110 cmlength 135 cmlength 165 cm
5510-6620-0005510-2017-0025510-2017-003
Hot-dip galvanised double cow chain, with 3 swivelslength 86 cmlength 40 cm
5580-2020-0015580-2025-000
Hot-dip galvanised single cow chain, with swivel, length 70 cm5580-2030-000
Fitting for use of nylon ribbons on sows
Hot-dip galvanised chain, length 40 cm, thick 7 mm, with trian-gular swivel 5500-2040-000Stainless steel safety link for fixing chain to tether 5580-2046-000
Bow shackle 10 mm, hot-dip galvanised 5580-4110-004
Single floor anchor, wear-resistant cast iron, hot-dip galvanised5580-4153-000
Link buckle, hot-dip galvanised 5580-2045-000
Feeders
Hot-dip galvanised feeding trough, internal width 27 cm, height 10 cm
length 50 cmlength 100 cmlength 150 cmlength 200 cmlength 250 cmlength 300 cm
5580-2930-0005580-2930-0015580-2930-0025580-2930-0035580-2930-0045580-2930-005
01-05-2010
maxi
senior
junior
sheep
small
Cow chains Sow girth tether
Applicator Total Tagger
Automatic applicator
Nylon ribbons
Straight floor scraperBowed floor scraper
Feeder
Livestock care
www.brouwersequipment.com 49
Fastening items ModelHot-dip galvanised pigsty bolt 5580-3104-000
Eyebolt with swivelfor half-brick wallfor nine-inch wall
5580-1215-0015580-1215-002
Galvanised emergency lock, length 100 mm 5580-2126-000
Hot-dip galvanised link buckle 5580-2045-000
Hot-dip galvanised steel C-hook 5510-9141-000
Bow shacklestainless steel, 5 mmstainless steel, 6 mm
hot-dip galvanised, 8 mmhot-dip galvanised, 10 mmhot-dip galvanised, 12 mm
5580-4110-0015580-4110-0025580-4110-0035880-4110-0045580-4110-005
Ring with swivel, 100 mm on the inside 5580-2140-000
Hot-dip galvanised swivel7 mm
10 mm5580-9225-0005580-9225-001
Hot-dip galvanised triangular swivel 5580-9226-000
disinfecting foot-bathDisinfecting foot-bath in polyethylene, with rounded corners, easy to empty, stackable, width 85 cm, length 210 cm, height 17 cm, weight 20 kg, maximum contents 200 litres, with graduation 5580-3000-000
Brush setsHinged holder with two brushes
fixing to wallfixing to feed barrier 7800 series
5580-2230-0005580-2230-001
Springy holder with two brushesfixing to wall
fixing to cubicle partitionfixing to feed barrier 7800 series
5580-2235-0005580-2235-0045580-2235-006
Single brush 5580-2232-000
Salt lick holder
Salt lick holder, hot-dip galvanised (we advise to paint all iron in the direct surroundings with a good adhesive paint)
for fixing to wallfor fixing to 1½” tubefor fixing to 2” tubefor fixing to 2½” tube
5580-4320-0005580-2199-0015580-2199-0025580-2199-003
Cow immobilizersCow immobilizer, solid construction 5580-5426-000
Separate cap for cow immobilizer 5580-2073-000
Separate spring for cow immobilizer 5580-2073-001
Aluminium cow immobilizer, freely adjustable 5580-2072-001
01-05-2010
3104 1215
2126
2045 9141 4110
2140 9225 9226
2199
3000
2230
2235
5426
2072
E-fan
50 Tel. 0031-58-2911129
Because of the use of milking robots and the rising milk productions we are seeing more and more farmers who keep their herd inside year-round. In order to increase the well being of the cows and te keep up the food consumption during the warmer days in summer, the use of large air-circulation ventilators is very effective.
The E-fan circulation ventilators for use in cubicle stalls for milking cattle are standard equipped with a V-belt transmission. This reduces the num-ber of revolutions of the blade, which makes the ventilators highly efficient and it will also keep the noise production within limits. For model 2211 it only amounts up to 65 dBA at a distance of 7 metres and for the models 2208 and 2209 only 64 dBA at 7 metres distance.
At the front and the back the ventilators are standard equipped with a grid. The casing is made of galvanised steel, the blades of stainless steel. The used rotary motors are specially designed, in order to make them suitable for revolution control by a transformer.
Ventilators without accessories Model
Circulation ventilator, 3 x 400 V, 50 Hz, motor 1,10 kW, 3,2 A, cap. 44.500 m³/h, weight 80 kg, dim. 140 x 140 cm 5570-2211-000
Circulation ventilator, 3 x 400 V, 50 Hz, motor 0,55 kW, 1,9 A, cap. 24.700 m³/h, weight 58 kg, dim. 107 x 107 cm 5570-2209-000
Circulation ventilator, 3 x 400 V, 50 Hz, motor 0,55 kW, 1,9 A, cap. 18.500 m³/h, weight 49 kg, dim. 92 x 92 cm 5570-2208-000
Accesssories for circulation ventilators
Motor safety switch in synthetic casing, to be placed close to the ventilator, amperage adjustable from 2,5 - 4,0 A, for 1,10 kW, 3 x 400 V 5570-6995-002
Motor safety switch in synthetic casing, to be placed close to the ventilator, amperage adjustable from 1,6 - 2,5 A, for 0,55 kW, 3 x 400 V 5570-6995-001
Suspension set, suitable for a height from truss to upper side of ventilator of approx. 5 metres, consisting of: 2 pieces of chain of 5,5 metres each, 2 triangular plates each with 3 pieces of M8 bolts incl. spring rings, 2 bow shackles and 2 pieces of M10 bolts incl. security bolts and washers for fastening the chain to the triangular plates
for ventilator 107 x 107 cmfor ventilator 140 x 140 cm
5570-6940-0005570-2212-008
Separate galvanised eye bolt M8 5570-6994-003
Metre of chain 42,5 x 15 x 7 mm, hot-dip galvanised 5510-9144-000
Bow shackle 8 mm, hot-dip galvanised 5580-4110-003
Transformers for revolution control
Manually operated 5 phased transformer, built in a spot-proff steel casing (IP54), transformer winding provided with clixons with disconnection relay in the casing, tension 3 x 400 V, 50 hZ (neutral wire not necessary)
maximum current 7 amperemaximum current 11 amperemaximum current 14 amperemaximum current 17 amperemaximum current 21 ampere
5570-6920-0075570-6920-0105570-6920-0135570-6920-0145570-6920-015
Control thermostat in separate casing, 5 positions, mechanical, to regulate the capacity automatically, to be connected to a specially designed transformer, in which the manually operated switch is replaced by an electronic switch relay 5570-6921-000
Automatic 5-phased transformer, as described above under 2212.05, however with electronic switch relay instead of manu-ally operated. Provided with a rotary switch off-hand-automatic. In the automatic position the ventilator basically rotates at the lowest level as long as the measured temperature stays beneath the set temperature. If the temperature rises 1,5ºC above the set temperature, the automatic transformer switches to level 2. At another temperature rise of 1,5ºC it switches to level 3 and so on upward
maximum current 7 amperemaximum current 11 amperemaximum current 14 amperemaximum current 17 amperemaximum current 21 ampere
5570-6920-0005570-6920-0015570-6920-0025571-6920-0035570-6920-003
Automatic switching on/off ventilators
switchbox with 1 or 2 magnetic relays (second with delayed switching), with swivels for 3 or 6 connections and switch hand-off-automatic. Including separate thermostat box for 2-wired connection with rotary switch for temperature adjustment. If the set temperature is being reached in the automatic position, the connected ventilators will start and turn on full power. As soon as the temperature falls under the set value the ventilators will stop. For ventilators of 1,1 kW, 400 V, 3,5 A each
for 1 up to 3 ventilatorsfor 4 op to 6 ventilatorsfor 7 up to 9 ventilators
5570-2212-0095570-6930-001
For use in cubicle stalls, we recommend the largest model with the highest capacity. An intermediate space of 15 up to 18 metres max. is usual for this model. Room underneath the ventilators min. 250 cm. In order to keep the cows active at the feed barrier for as long as possible, the best place for the ventilator is above the walking alley, next to the feed barrier. The smaller models can be applied in lower stalls, hold areas or at milking installations.
To determine the size of the transformer you should reckon 3,5 amp. per ventilator for model 2211. For the models 2208 and 2209 2,2 amp. per ventilator.
For extra cooling or humididying the E-fan can be equipped with a water atomiser with a capacity of 15 up to 30 l/h. The atomiser can be easily installed and it operates without any nozzles, there are no risks of clogging with impurities or limestone.
01-05-2010
Ventilation
www.brouwersequipment.com 51
Brouwers Equipment BV can supply a wide ringe of ventilation systems. Underneath you will find a small part of our products. Complete extensive information and prices on application.
Ventilation ridgeThe RFV-system ventilation ridge is specially developed for agriculatural buildings. The system is based on natural ventilation according tot the “Venturi” principle. This principle quickens the airflow over the roof by means of narrowing, by which an absorbin action arises (the so-called chimney effect). The RFV-system ventilation ridge is composed of high-quality materials, very solidly constructed and tested on functionality and quality in several agricultural buildings. The RFV-system ventilation ridge is easily and quickly to assemble. Useable for new buildings as well as for renovation of existing ridge systems. Unique are the optinal ridge pieces, useable on different kinds of corrugated plates. The RFV-system venti-lation ridge is available with non-transparent or crystal-clear corrugated plates.
Cow house curtainsWe supply a wide range of ventilation cloths, varying rom opaque cloth to bird netting. The cloth can be fixed, if desired with a tightening device. It is also possible to apply several sorts of cloth moveable. The systems can be more or less automated.
Single tube system: opens from the bottom upward. The cloth rolls • around a tube, which is lifted up by means of a winch.Double tube system: opens from the top downward. The curtain is kept • tight by means of a tube that is freely laid in the cloth.
AgridoorsThe Agridoors are a flexible solution to close frequently used entrance openings. Because of the horizontal strengthening profiles large free spans (max. 6 metres) are possible. During assembly the door can easily be shortened in width with help of the instructions. Underneath the cloth has a grey sealing flap of 140 mm high. There are several kinds of cur-tains available. It is also possible to use different kinds of curtain between the profiles. The maximum height is 6,1 metres. The curtain runs up to the sidelong guiding rails. This results in less draught and makes it closed for birds. The winding tube is provided with a packet of springs in order to make the operation easier. The lower tube and the winding tube are made from alumiinium. The vertical rails are made from galvanised steel.
Variable Ventilation SystemThis roll-up sidewall ventilation system provides a minimum of draught, a maximum of fresh air and protection against all weather conditions. The standard version can be applied in large openings up to 3 metres high and even 60 metres long. Different kinds of durtains can be integrated in this system, if desired also in combination. An extra bird net can be fixed in sections. The system can be operated manually or by means of electrical motors. Climate controlled operation by means of sensors is also possible.
01-05-2010
Brouwers Equipment B.V.Vestaweg 5Postbus 203
8901 BA LeeuwardenHolland
Tel. 0031 - 58 - 2911129Fax 0031 - 58 - 2911100
Your dealer:
built stronger to last longer
catalogue 2010