catalogueaf2018-en-12avril18 a320 - regulatory requirements applicable in flight - production and...
TRANSCRIPT
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
1 6045
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
2
Maintenance Training Organization approved as per EASA FR.147.0037 14 avenue Escadrille Normandie Niémen 31700 BLAGNAC - FRANCE
Phone +33(0)5 34 47 18 38 - [email protected] www.air-formation.com
Adherent Approved
Follow us on air-formation.com
And social networks
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
3
On-site training in French
On-site training in English
E-learning training
Blended, combining on-site and E-learning trainings
Overview
- Our training courses are located in Toulouse or, on request, on-site at the customer’s premises. - By default, our teaching methods alternate between theory and interactive presentations. - E-learning timings are given for information only with reference to the theoretical time spent in the classroom - Blended training is a mix of E-learning and face to face training. The duration of training may vary according to the number of candidates. Average timing was calculated on a base of 6 to 8 trainees - Refer to the E-learning policy to know the time distribution between E-learning and face to face training.
Captions for symbols used in the table of content
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
4
TABLE OF CONTENT Instructor - Trainer
French English E-learning Blended Page
Internal Instructor – Trainer 6
Aviation Regulation Instructor 7
Human Factors and SMS Instructor 8
Internal Instructor Fuel Tank Safety & CDCCL 9
Internal Instructor Electrical Wiring Interconnection Systems (EWIS) 10
Assessor / Practical Instructor 11
“Self-Defense” Instructor Course “Ready-to-use” Training Package 12
CRM Instructor Course & CRM Trainer Assessment 13
Training kits 14
Instructor Validation/Supervision 15
Safety Management System & Human Factors French English E.learning Blended Page
Human Factors & SMS Awareness 28
Safety Management System 29
Safety Management System Manager 30
Safety Management System Expert Manager 31
Aviation Techniques French English E.learning Blended Page
How do airplanes fly? Theory and techniques 32
Safety rules in maintenance workshops 33
Fuel Tank Safety & CDCCL Level 1 34
Fuel Tank Safety & CDCCL Level 2 35
Electrical Wiring Interconnection Systems (EWIS) Groups 1 to 6 36 Risks related to Foreign Object Damage (F.O.D) 37
EASA Regulation French English E.learning Blended Page
Aviation Regulation Sensibilisation - video 16
Aviation Regulation - Initial Training 17
Aviation Regulation EASA PART 21 G 18
Aviation Regulation EASA PART M 19
Aviation Regulation EASA PART M / 145 & CRS 20
Aviation Regulation – ANNEXES PART 145, EASA Form 1, FAA 14 CFR, TCCA CAR, CCAR, RBAC 145 & others 21
Suspected unapproved parts
22
Aviation Regulation AIR OPS 23
Aviation Regulation EASA PART 66 and 147 24
Aviation Regulation FRA 21G 25
Aviation Regulation EMAR / FRA M/145 26
Internal Quality Auditor (PART 145, 21, M, 147 and AIR OPS) 27
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
5
Aircraft Mechanics Formation en Français
Formation en Anglais
Formation en E.learning
Formation en Blended learning Page
Aircraft maintenance training Licence 66 Ab Initio: B1.1, B1.2 & B2
38-39
BEECH 90 (T1) / 200 (T1) / 1900 (T1) (T2) Series 40
Type rating SOCATA TBM 700 Series (PWC PT6) (T1,T2) 41
Type rating CESSNA C-208 - PWC PT6 (T1) 42
Type rating PT6A Series, Theorical training T1 - Pratt & Whitney 43
General Familiarisation Airbus A320 series - CFM56 44
General Familiarisation Boeing 737 series - CFM56 45
General Familiarisation Beech 90 / 200 / 1900 Series - PWC PT6 46
General Familiarisation SOCATA TBM 700 - PWC PT6 (T1, T2) 47
General Familiarisation PT6A Series 48
PART 145 aircraft mechanic assistant 49
Airport safety Formation en Français
Formation en Anglais
Formation en E.learning
Formation en Blended learning Page
Safety over Parking areas / Marshalling 50
Aircraft De-icing 51
Aircraft pushback and towing operations (aeroplanes, helicopters) 52
Cockpit & Cabin Training Formation en Français
Formation en Anglais
Formation en E.learning
Formation en Blended learning Page
Ab-Initio (Initial Training) 53-54
Recurrent Training 55
Security 56
SEP Equipment 57
SEP Training 58
AIR-OPS 59
Crew Resource Management Cabin Crew 60
Crew Resource Management Flight Crew 61
Aero-Medical aspects & First Aid 62
Self-Defence Course 63
Survival & Water Survival in Real Environment 64
Fire Fighting & Smoke Contamination 65
ATR Type Rating Course 66
Service Provision Skills Assessment 67 Assessment Test Technical English for Aviation Maintenance 68
Space Rental 69 Simulators & Educational Mock-ups Rent 70
Administration Page
E-learning policy for trainees 71
Internal Rules and Regulations 87
General Terms and Conditions of Sale 91
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
6
Internal Instructor – Trainer Instructional training
OBJECTIVES Be able to: - Structure the content of a training, and design instructional supports and tools. - Animate and energize a training group. - Assess the progress of trainees, and validate their skills.
WHO SHOULD ATTEND Personnel holding a sufficient work experience (3 years recommended), and managing the instructional subject.
TRAINING METHODS The totality of our on-site training is, above all, operational and as close as possible to real conditions of every day operations. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Base Training (EBT).
PROGRAMME The Instructor/Trainer Adult trainees Environment Instructional tools Training methods and techniques: - How to start a training session - Training objectives - Training plan - Techniques and processes to animate a course Knowledge assessment using the coaching method Practical exercise based on the dissemination of a training, and assessment of the student-instructor Each trainee must produce a copy of his teaching plan and present a module of his choice to the other trainees. Performance will be evaluated according to the E-learning pedagogical “Internal Instructor – Trainer” course followed and documented on an assessment form.
RATES / AVAILABLE VERSIONS
Version Initial training Recurrent training Duration
(hours) Rates (€) VAT Excl. Duration
(hours) Rates(€) VATExc.. TRAINING MANAGER
Stéphanie CHEVALLIER
21 1140 14 540
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
7
Aviation Regulation Instructor Aviation Regulation & Instructional Training
OBJECTIVES Aviation regulation: Understand and get familiar with the different regulations in force within the European, National and International contexts. Identify the different regulatory documentations so as to use the relevant information. This training has been specifically designed to provide participants with a thorough knowledge of the regulations ruling national and international Civil Aviation. Instructor: Get familiar with the techniques related to instruction: how to structure the content of a training course, to design instructional supports and tools, to animate and energize a training group, to assess the progress of trainees and to validate their skills.
WHO SHOULD ATTEND Personnel involved in Civil/state aviation regulation Future instructor or experienced instructor who wants to increase their knowledge Prerequisite: Detailed knowledge of aviation regulation
TRAINING METHODS - Electronic documentation provided to the participants (touchpad including the Regulation courseware for the educational pack) - Evidence Based Training (EBT) scenarios - For E-learning/Blended, consult our corporate policy for trainees
PROGRAMME REGULATION: 21h including 7 hours though E-learning Consult the program of the Aviation regulation training on page 17 INSTRUCTOR: 21h including 7 hours though E-learning Consult the program of the “Internal Instructor – Trainer” training on page 6. Option: Training kit on touchpad which includes the lesson plan, one E-learning access, course support, EBT tests, videos, trainee booklet and copyright free documents. Option: Instructor Supervision/Validation (certification) it complements the “Internal Instructor - Trainer” training and validates the title of “Instructor”, in compliance with the EASA Part 145 & 147 regulation. Available on page 15.
RATE / AVAILABLE VERSION
Version Duration (hours) Rates (€) VAT Excl. 42 3460
TRAINING MANAGERS Laurent VALLIER and Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
8
Human Factors and SMS Instructor Human Factors & Safety Management System
OBJECTIVES - Human Factors / Safety Management System: Implement Human Factors and a Safety Management System within your organization, and develop an efficient communication on their implementation. - Case studies: Be able to analyze events/incidents/accidents to implement the most relevant actions with an appropriate communication. - Pedagogy: Be able to structure the content of a training, to design instructional supports and tools, to animate and energize a training group, to assess the progress of trainees and to validate their skills.
WHO SHOULD ATTEND Future Human Factors & SMS instructors or trainers intending to get involved in PART M, 145 or 147 organizations. Personnel who wish to take part in Human Factors and SMS. Prerequisite: Chapter 8 of DGAC Booklet P54-45
PROGRAMME Create your own training: 5 days, 3 days or 2 days + Supervision in option Day
1 Day
2 Day
3 Day
4 Day
5 Option
HF & SMS (Blended – 21 hours) X X Case Study (On site – 7 hours) X Pedagogy (Blended – 21 hours) X X “Live” Supervision in option ( On site – 11 hours) X Compliant with DGAC fascicles P54.45 and P50.11, and the latest issue of the Safety Management System implementation guidelines. Human factors & SMS: 21 hours (including 7 though E-learning). Consult the program of the “Human factors and SMS awareness” on page 28. Case studies: - Investigation methodologies Pedagogy: 21hours including 7hours in E-learning. Consult the program of the “Internal Instructor - Trainer” on page 6. Option: Instructor Supervision/Validation (certification) it complements the “Internal Instructor – Trainer” training and validates the title of “Instructor”, in compliance with the EASA Part 145 & 147 regulation. Available on page 15. Option: Training kit on touchpad which includes the lesson plan, one E-learning access, course support, EBT tests, videos, trainee booklet and documents free of copyright. Available on page 14.
TRAINING METHODS Blended The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Base Training (EBT).
RATE / AVAILABLE VERSION
Version Duration (hours) Rates (€) VAT Excl. 49 4190
TRAINING MANAGER Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
9
Internal Instructor Fuel Tank Safety & CDCCL
Aviation Techniques
OBJECTIVES FTS & CDCCL: Understand and become familiar with the application of this regulation. Provide participants with a technical knowledge in terms of FTS & CDCCL. INSTRUCTOR: Get familiar with the techniques related to instruction: how to structure the content of a training course, to design instructional supports and tools, to animate and energize a training group, to assess the progress of trainees, and to assess their skills.
WHO SHOULD ATTEND Future internal instructors in charge of the dissemination of FTS & CDCCL regulations on a corporate basis, or in the scope of Type Ratings programmes (if needed). Prerequisite: Detailed knowledge in FTS and CDCCL techniques and security.
TRAINING METHODS - Study of accident and incident reports on the subject - Analysis of relevant maintenance documents (AMM, CMM) - EBT (Evidence Based Training) scenarios - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy.
PROGRAMME FUEL TANK SAFETY & CDCCL: 14h (including 7 hours through E-learning) Consult the program of the “Fuel Tank Safety & CDCCL Level 2” training on page 35. INSTRUCTOR: 21 hours (including 7 hours through E-learning) Consult the program of the “Internal Instructor - Trainer” on page 6 Option: Instructor Supervision/Validation (certification). It completes the “Internal Instructor – Trainer” training and allows becoming instructor, in compliance with the EASA Part 145 & 147 regulation. Available on page 15. Option: Training kit on touchpad which includes the lesson plan, one E-learning access, course support, EBT tests, videos, trainee booklet and documents free of copyright.
RATES / AVAILABLE VERSIONS
Version Duration (hours) Rates (€) VAT Excl. 35 3460
TRAINING MANAGERS Eric PELLETIER and Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
10
Internal Instructor – EWIS Groups 1 to 8 Electrical Wiring Interconnection Systems
Aviation Techniques
OBJECTIVES EWIS: Understand and become familiar with the application of EWIS regulation. Provide participants with a technical expertise in terms of EWIS safety practices. INSTRUCTOR: Get familiar with the techniques related to instruction: how to structure the content of a training course, to design instructional supports and tools, to animate and energize a training group, to assess the progress of trainees, and to assess their skills.
WHO SHOULD ATTEND Future internal instructors in charge of the dissemination of EWIS regulations on a corporate basis, or in the scope of Type Ratings programmes (if needed). Prerequisite: Detailed knowledge of EWIS (Electrical wiring interconnection system)
TRAINING METHODS - Study of accident and incident reports on the subject - Analysis of relevant maintenance documents (AMM, CMM) - Use of specific practical repair tools and documentation (practical training module) - Electronic documentation provided to the participants - EBT (Evidence Based Training) scenarios - For E-learning/Blended, consult our corporate training policy
PROGRAMME EWIS: 21 hours including 7hours in E-learning Consult the “Ewis Group 1” training on page 36. INSTRUCTOR: 21hours including 7 in E-learning Consult the “Internal Trainer-Instructor” training on page 6. Option: Instructor Supervision/Validation (certification) it completes “Internal Instructor – Trainer” training and allows becoming instructor, in compliance with the EASA Part 145 & 147 regulation. Available on page 15. Option: Training kit on touchpad which includes the lesson plan, one E-learning access, course support, EBT tests, videos, trainee booklet and documents free of copyright.
RATE / AVAILABLE VERSION
Version Duration (hours) Rates (€) VAT Excl.
42 3460 TRAINING MANAGERS Laurent VALLIER and Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
11
Assessor / Practical Instructor Type Training / On-the-job Training
Compliant Part M /145 /147
OBJECTIVES Be able to: - Understand the objectives and principles related to a practical assessment - Get familiar with the different assessment methods - Prepare an assessment: methodology, criteria and supports - Assimilate the different steps included in an assessment - Evaluate and mark - Validate the acquisition of skills - Write post-assessment reports
WHO SHOULD ATTEND Personnel who will be in charge of the assessment of applicants following completion of the practical part of a basic training, type training and/or on-the-job training in compliance with Part 66. Prerequisite: Compliant to R 52-02 Version C § 9 et 10
TRAINING METHODS - Study-cases based on real-life work experiences and reports - Practical assessment exercises - Combination of interactive presentations from different companies - EBT (Evidence Based training) scenarios - For E-learning/Blended, consult our corporate training policy
PROGRAMME
- Flight safety – Responsibilities of the different actors - Definition of the conditions ruling a practical assessment in the MOE - Objectives and principles related to a practical assessment - The different assessment methods - The required code of ethics - Duties and Privileges of the assessor - The different instructional / animation methods - Communication / Questioning / Practical training exercises * - The different assessment methods from the analysis of the training booklet, the interview with the supervisor, the oral and written questions up to the conduct of maintenance tasks under the supervision of the practical assessor - Preparation of an assessment: selection of relevant methods, implementation of pre-established criteria - Conduct of the assessment - Situational assessment of the “trainee”- assessor - Behaviors to adopt in case of difficulties - Filling Instructions for logbooks and reports - Writing rules for log cards (creation of the log-book) - Filling Instructions for post-assessment reports and records
Option: Validation of your nomination as an Assessor/Practical Instructor in compliance with EASA Parts 145 & 147 regulations: Support and Evaluation of the assessor/practical instructor during his/her first practical assessment.
RATE / AVAILABLE VERSION
Version Duration (Hours) Rates (€) VAT Excl. Training Objectives and Programme compliant with the requirements listed in DGAC/DSAC Fascicle R 52-02, Version C.
21 1090
TRAINING MANAGER
Reynald DACHICOURT
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
12
“Self-Defense” Instructor Course “Ready-to-use” Training Package
OBJECTIVES To be able to train your trainees in basic self-defense techniques so that they can protect themselves during a physical attack on board and if necessary immobilize the violent passenger.
WHO SHOULD ATTEND Future instructor to self-defense techniques. Prerequisites: Good physical conditions Previous dispositions and/or experiences in teaching The practice of a martial art is highly recommended
TRAINING METHODS
The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Base Training (EBT).
PROGRAMME
Introduction to Self defense: statistics & regulations Warm up exercices & body functioning Self defense techniques
- Face to face attacks - Lateral attack - Frontal throat attack - Back throat attack - Crew on ground - Tools for attacker immobilization - Realeasing another crew member (in the cabin and in the cockpit)
- Realeasing another crew member (in the cabin and in the cockpit)
Conclusion
Option: Training kit on touchpad which includes the lesson
plan, one E-learning access, course support, EBT tests,
videos, trainee booklet and documents free of copyright.
RATE / AVAILABLE VERSION Version Duration (hours) Rates (€) VAT Excl. 21 2200
The duration of training may vary according to the number of candidates. Average timing was calculated on a base of 6 trainees.
TRAINING MANAGER Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
13
CRM Instructor Course & CRM Trainer Assessment Crew Training Course - Cockpit & Cabin
OBJECTIVES - To be able to demonstrate the knowledge, skills and credibility required to train the CRM training element in the non operational environment, as specified in Table 1 of AMC1.ORO.FC.115 and/or AMC1.ORO.CC.115 - To develop specific trainer skills, particularly the integration of CRM into day to day operations.
WHO SHOULD ATTEND CRM trainers to become must have the prerequisites defined in the AMC3 ORO.FC.115 and/or AMC3 ORO.CC. 115.
PROGRAMME Crew Resource Management: 18 hours training with a minimum of 12 hours in class. Consult the «Crew Resource Management» program on pages 61 and 62. INSTRUCTOR: 21h (including 7 hours through E-learning) Consult the “Internal Instructor – Trainer” training program on page 6. Presentation of a CRM module either simulated or in front of a real training CRM session. The checklist in Table 1 provides guidance on the assessment of a crew CRM trainer. If a CRM trainer is competent in his/her role, the response to the questions in Table 1 should be ‘yes’. When answering the questions in Table 1, justifications and examples related to the responses given should be provided. Day 1 Day 2 Day 3 Day 4 Option
CRM Flight Crew X X
CRM Cabin Crew X X
Pedagogy X X
Additional X Table 1 —CRM trainer assessment checklist Did the CRM trainer demonstrate the knowledge required for the role? Did the CRM trainer support CRM concepts? Did the CRM trainer encourage trainees to participate, share their experiences and selfanalyse? Did the CRM trainer identify and respond to the trainees’ needs relative to Expertise/experience? Did the CRM trainer show how CRM is integrated in technical training? Did the CRM trainer incorporate company CRM standards when appropriate? Did the CRM trainer identify and discuss the non-technical reasons involved in accidents, incidents and events included in case studies? Did the CRM trainer regularly check for understanding and resolve ambiguities? Did the CRM trainer demonstrate effective instruction and facilitation skills? Additional: Trainer assessment in real situation. In front of real class: + Minimum 2 hours (As per Operator Mannex) Option: Training kit on touchpad which includes the lesson plan, one E-learning access, and course support: EBT tests, videos, trainee booklet...
TRAINING METHODS On site or Blended The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Based Training (EBT).
RATE / AVAILABLE VERSION
Version Duration (hours) Rates (€) VAT Excl.
39 4190
TRAINING MANAGERS Stéphanie CHEVALLIER et Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
14
Training kits
OBJECTIVES Provide the tools to become an effective instructor. This training kit will help you: - Save time - Save money - Make your own training more dynamic - Modernize your methods & tools - Evaluate skills
TRAINING KIT CONTENT Session preparation: Trainer objectives, pedagogical plan, E-learning access… The course: trainee objectives, training support, EBT (Evidence Based Training), evaluation… Educational support: trainee booklets, documentation, media…
TRAIN YOUR TEAM Available training kit:
- Human factors and SMS
- Aviation regulation
- Self-defense
- Electrical Wiring Interconnection Systems (EWIS)
- Fuel Tank et Critical Design Configuration Control
Limitations (CDCCL)
- CCA training kits for Cabin crew:
- Crew Resource Management (CRM)
- SEP (Safety and Emergency Procedures)
- First aid
- Safety
These training kits are available for initial and recurrent
training.
RATE / AVAILABLE VERSION
CONTACT [email protected] Phone: +33 (0)5 34 47 18 38
Version Rates (€) VAT Excl. Contact us
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
15
Instructor Validation/Supervision OBJECTIVES 1- Human factors and SMS instructors: Complete the Internal instructor - trainer course to validate the title of trainer, compliant with EASA Part 145 & 147 regulation. 2- Others instructors: Complete the “Internal Instructor – Trainer” training to validate the title of trainer.
WHO SHOULD ATTEND
Trainer/Instructor who wants to validate their skills in real-life training
situations.
Prerequisite: Completion of the “Internal Instructor - Trainer” course.
PROGRAMME
-Support in training establishment (educational plan, training
support…).
- If needed, bring help to complete the theoretical training on
the subject.
- If necessary, bring support during the session.
- Assessment and debriefing of the session.
RATES / AVAILABLE VERSIONS
CONTACT [email protected] Phone: +33 (0)5 34 47 18 38
Versions Duration (hours) Rates (€) VAT Excl.
HF 11 1100 Others 8 1100
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
16
Aviation Regulation Sensibilisation International & National Regulations
OBJECTIVES - Be able to know and understand the application of the different regulation on an International and European scale. - This training provides a knowledge of National and international aviation regulation.
WHO SHOULD ATTEND Accountable Managers, technical managers, design office managers, general public. Individuals wishing to acquire basic knowledge regarding aviation regulation and the principles of application of EASA regulation.
TRAINING METHODS - Training provided in the form of a video.
PROGRAMME Organization of air transport all around the world:
- ICAO, its missions and objectives
- EASA (European Aviation Safety Agency)
- DGAC & OSAC
Airworthiness certification of aircraft and related products.
European regulation EU N° 748/2012:
- PART 21: Design and Production organizations
AIR-OPS regulation related to European air operators
European Regulation EU N°1321/2014 related to the continuing airworthiness
of aircraft and related products, parts and appliances:
- PART M: Airworthiness management
- - PART 145 / PART 147
- Certificate of Release to Service (CRS) and release documents
- PART 66: Certifying staff licences
- PART 147: Maintenance Training and examination Organization
Military and State aircrafts regulation
RATE / AVAILABLE VERSION
Version Duration (hours) Rates (€) VAT Excl.
2 75 TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
17
Aviation Regulation
Initial Training National and International Regulations
OBJECTIVES - Understand and get familiar with the different regulations in force within the European and International contexts. - Identify the different regulatory documentations so as to use the relevant information. -This training has been specifically designed to provide participants with a thorough knowledge of the regulations ruling national and international Civil Aviation.
WHO SHOULD ATTEND Accountable managers, technical managers, Continuing Airworthiness managers, quality managers, certifying staff, auditors. Individuals who wish to develop their basic knowledge in terms of aviation regulation and the principles ruling application of EASA regulations.
TRAINING METHODS - On-site training - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy
PROGRAMME Organization of air transport all around the world: - ICAO, its missions and objectives - FAA (USA), CAAC (China), TCCA (Canada) - EASA (European Aviation Safety Agency) - DGAC & OSAC Airworthiness certification of aircraft and related products European regulation EU N° 748/2012: - PART 21: Design and Production organizations AIR-OPS regulation related to European air operators European Regulation EU N° 1321/2014 related to the continuing airworthiness of aircraft and related products, parts and appliances: - PART M . Subpart F: Maintenance organization . Subpart G: Continuing Airworthiness Management Organization . Subpart I: Airworthiness Review Certificate (ARC)
- - PART 145 / FAA 14 CFR Part 145: Maintenance organization - Certificate of Release to Service (CRS) and release documents - PART 66: Certifying staff licences - PART 147: Maintenance Training and examination Organization Knowledge assessment
RATES / AVAILABLE VERSIONS All regulatory documents are up-to-date with the latest issue
in force. Modules specifically dedicated to PART 21, M, 145, 147 or AIR OPS can be designed and customized on request.
Version Duration (hours) Rates (€) VAT Excl. 7 440 14 780 7 340
TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
18
Aviation Regulation
EASA PART 21 G European regulation ruling Design / Production
OBJECTIVES - Get familiar with PART 21 J and G key-topics and their latest amendments. Understand PART 21 G detailed requirements, and identify the different regulations in force to use the relevant information. - This training provides participants with the required regulatory knowledge in terms of Design / Production of aircraft, engines and equipment within the European context.
WHO SHOULD ATTEND Accountable Managers, Design Office engineers, technical managers, certifying staff, Technicians. Individuals who wish to develop their basic knowledge of aviation regulation and the principles ruling its application in terms of aeronautical design and production.
TRAINING METHODS - On-site training - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy
PROGRAMME International Civil Aviation Organization (ICAO): - Presentation - Standards and Recommendations European Aviation Safety Agency (EASA): - Regulation EC N° 216/2008 (basic regulation) - Articles issued and principles of issuance Civil Aviation General Directorate (DGAC) and
Organization for civil aviation safety (OSAC): - Structure and missions - Documents issued - Supervision of approved organizations Aircraft certification: - Principles and reference documents (CS 23, 25, E, P
and TSO) & certification tests Detailed study of Regulation EU N° 748/2012 and its
subparts Brief study of PART 21J: Design Organization Approval
(DOA) Detailed study of PART 21G: Production Organization
Approval (POA) Certificate of Release to Service (CRS): - Privileges and Responsibilities - Regulatory requirements - Production Organization Exposition (POE) - Release documents: EASA Forms 52, 53 - Detailed study of EASA Form 1 Knowledge assessment
RATES / AVAILABLE VERSIONS All regulatory documents up-to-date with the latest issue in
force. As an option and on request: EASA-approved examination (PART 21 Exam).
Version Duration (hours) Rates (€) VAT Excl. 7 440 7 115 7 340
TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
19
Aviation Regulation
EASA PART M European Continuing Airworthiness Regulation
OBJECTIVES - Get familiar with identifying the different documents to use the relevant informations with respect to Regulation EU N° 1321/2014 Part M (Annex I), related to the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and to the personnel involved in these tasks. - This training provides participants with the required regulatory knowledge in terms of aircraft continuing airworthiness within the European context, while making them familiar with the key-topics of PART M and their latest amendments.
WHO SHOULD ATTEND Accountable Managers, technical managers, Continuing Airworthiness managers, certifying staff, technicians. Individuals who wish to develop their knowledge and skills in terms of aviation regulation and the principles ruling application of EASA Continuing Airworthiness regulations.
TRAINING METHODS - On-site training - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy.
PROGRAMME ICAO (International Civil Aviation Organization) European Aviation Safety Agency (EASA): - Regulation EC N° 216/2008 (basic regulation) Brief study of PART 21: Design & Production Organizations Brief study of AIR OPS: Air operators Brief study of European Regulation EU N° 1321/2014 related to the continuing airworthiness of aircraft and aeronautical products, parts and appliances Detailed study of PART M: - Subpart A: General - Subpart B: Accountability - Subpart C: Continuing Airworthiness - Subpart D: Maintenance Standards - Subpart E: Aircraft components - Subpart F: Maintenance organizations - Subpart G: Continuing Airworthiness Management Organization - Subpart H: Certificate of Release to Service - Subpart I: Airworthiness Review Certificate Knowledge assessment All regulatory documents are up-to-date with the latest issue in force. According to your organization Approval:
- Option 1: PART M/G + I - Option 2: PART M/F
- Annex*: Detailed studies of EASA Form1 (E-learning only)
RATES / AVAILABLE VERSIONS
Version Initial training Recurrent training
Duration (h) Rates (€)
VAT Excl. Duration (h) Rates (€)
VAT Excl. 7 440 3.5 260 7 115 3.5 98 7 135* 3.5 115* 7 340 3.5 240
*Annexes included
TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
20
Aviation Regulation
EASA PART M / 145 & CRS European Maintenance Regulation
OBJECTIVES - Get familiar with PART(s) M and 145 key-topics and their latest amendments. - Understand the detailed requirements of PART(s) M and 145, and identify the different regulations in force to use the relevant information. - This training provides participants with the required regulatory knowledge in terms of aircraft, engines and equipment maintenance.
PROGRAMME ICAO (International Civil Aviation Organization) EASA (European Aviation Safety Agency):
- Regulation EC N° 216/2008 (basic regulation) Brief study of PART 21: Design & Production Organizations
Brief study of AIR OPS: Air operators Brief study of European Regulation EU N° 1321/2014, related to the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and to the approval of the personnel involved in these tasks Brief study of EASA PART M:
- Subpart D: Maintenance Standards - Subpart E: Components - Subpart H: Certificate of Release to Service Detailed study of EASA PART 145, Maintenance organizations:
- General - Requirements in terms of facilities, tools, materials and data...
- Certifying staff - Safety policy and Quality system - Privileges of the approved organization - Principles of supervision Certificate of Release to Service (CRS):
- Privileges - Obligations - Responsibilities EASA Form 1 and similar documents:
- Description of the document - Regulatory requirements Knowledge assessment All regulatory documents are up-to-date with the latest issue in force Also available on request (Refer to Training datasheet “Annexes to PART 145”)*: - Annex: Detailed study of EASA Form1 - Annex: Regulation FAA 14 CFR 145 and MAG (United States) - Annex: Regulation TCCA CAR Part V and MAG (Canada) - Annex: Regulation CCAR Part 145 (China) - Annex: Regulation RBAC 145 (Brazil)
- Annex: Regulations specific to third-country operators
TRAINING METHODS - On-site training - Documentation provided to the participants. - For E-learning/Blended, consult our corporate training policy.
WHO SHOULD ATTEND Accountable Managers, technical managers, certifying staff, technicians. Individuals who wish to develop their basic knowledge of European aviation regulation and the principles ruling its application in terms of aviation maintenance.
RATES / AVAILABLE VERSIONS Version Initial training Recurrent training
Duration (h) Rates (€)
VAT Excl. Duration (h) Rates (€)
VAT Excl. 7 440 3.5 260 7 115 3.5 98 7 135* 3.5 118* 7 340 3.5 240
*Annexes included
TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
21
Aviation Regulation - ANNEXES
PART 145, EASA Form 1, FAA 14 CFR, TCCA CAR, CCAR, RBAC 145 & others International maintenance regulation
OBJECTIVES - Get familiar with PART 145 key-topics and their latest amendments. This training has been specifically designed to provide participants with a thorough knowledge of the maintenance regulations in force within the international context. - Understand PART 145 detailed requirements, and identify the different regulatory documentations to use the relevant information.
WHO SHOULD ATTEND Accountable Managers, technical managers, certifying staff, technicians. Individuals who wish to develop their basic knowledge of aviation regulation and the principles ruling application of maintenance regulations within the international context.
TRAINING METHODS - Documentation provided to the participants. - For E-learning/Blended, consult our corporate training policy.
PROGRAMME Annex: Detailed study of EASA Form 1 - Eligibility and Liability - Associated writing rules - The different blocks to complete - The Dual Release - Similar documents
Annex: Study of FAA 14 CFR 145 and MAG: American
repair workshops - FAA (Federal Aviation Authorities) - MAG and FAA 14 CFR Part 145
Annex: Study of TCCA CAR Part V and MAG: Canadian
repair workshops - TCCA (Transport of Canada) - MAG and CAR Part V
Annex: Study of CCAR 145 and Form AAC-038: Chinese
repair workshops - CAAC (General Administration of Civil Aviation of China) - CCAR Part 145
Annex: Study of RBAC 145 and Form F-100-01: Brazilian
repair workshops - ANAC (Agência Nacional de Aviaçao) - MAG and RBAC 145 Annex: Regulations specific to third-country operators
RATE / AVAILABLE VERSION
Version Rates (€) VAT Excl.
20 € for one or several annexes
TRAINING MANAGER Laurent VALLIER
Annexes are provided on request upon registration to « EASA Part 145 & CRS » training.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
22
Suspected unapproved parts Aviation Regulations
OBJECTIVES - Be able to identify, describe and report any suspected unapproved parts (Bogus Parts). - Become familiar with the Quality Assurance rules implemented to detect and deal with unapproved parts. - This training provides participants with a basic knowledge in terms of identification of PMA (Parts Manufacturer Approval) and EPA (European Parts Approval).
WHO SHOULD ATTEND Accountable Managers, technical managers, Continuing Airworthiness managers, certifying staff, technicians, log and support staff.
TRAINING METHODS - On-site training - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy.
PROGRAMME General: - Suspected unapproved parts - Procurement circuit
Applicable regulation: - European regulations - American regulations - EN 9100 v2016 standard
What must be done? - Reduce risks - Participate in the detection of unapproved parts - Comply with the procedures in force in case of doubt - Report to the relevant Authorities - Correctives and preventives measures Notions of critical parts Examples of good practice PMA (Parts Manufacturer Approval): - Definitions - Acceptance rules EPA (European Parts Approval): - Definitions - Acceptance rules Regulation important points Knowledge assessment
RATES / AVAILABLE VERSIONS
Version Duration (h) Rates (€) VAT Excl. 3.5 260
2 87 TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
23
Aviation Regulation
AIR OPS European regulation ruling air transport
OBJECTIVES - Understand and get familiar with the key-topics of EASA AIR OPS regulation, and its latest amendments. - Provide the participants with the required regulatory knowledge in terms of aircraft operation for commercial and non-commercial transport within the European context.
WHO SHOULD ATTEND Accountable Managers, Technical managers, Flight Crew, continuing airworthiness managers, support staff, flight operations staff, quality staff and air operators (aircraft or helicopters).
TRAINING METHODS - On-site training - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy.
PROGRAMME General: - Basic regulatory principles and definitions - Statistics on flight safety Air transport Organization:
- ICAO, EASA, DGAC, DSAC and OSAC General presentation of European Regulation AIR OPS EU N° 965/2012: Detailed study of PART ARO Detailed study of PART ORO Detailed study of PART CAT Detailed study of PART SPA Brief study of PART NCC Brief study of PART NCO and SPO Knowledge assessment
RATES / AVAILABLE VERSIONS
Version Duration (hours) Rates (€) VAT Excl. All regulatory documents are up-to-date with the latest issue
in force
7 440
7 115
7 340 TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
24
Aviation Regulation
EASA PART 66 and 147 European Maintenance Regulation
OBJECTIVES - Get familiar with PART(s) 66 & 147 key-topics and their latest amendments: - Understand PART(s) 66 & 147 detailed requirements. - Identify and use the relevant information. - Provide participants with the required regulatory knowledge in terms of maintenance staff licences and approved training organizations.
WHO SHOULD ATTEND Accountable Managers, technical managers, quality managers, technicians and training managers of approved training organizations.
TRAINING METHODS - On-site training - Documentation provided to the participants.
PROGRAMME EASA (European Aviation Safety Agency): - Regulation EC N° 216/2008 (basic regulation) Brief study of European regulation N° 1321/2014, related to the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and to the approval of the personnel involved in these tasks. Detailed study of PART 66, Aircraft Maintenance Licence: - Applicants’ privileges - Requirements in terms of basic knowledge - Requirements in terms of basic experience - Basic training programme - Practical and type training programme (tasks/Ratings) - Examination programme - Conditions for the issuance and continued validity of an aircraft maintenance licence Detailed study of PART 147, approved training and examination organizations: - Requirements in terms of facilities - Requirements in terms of personnel - Instructional equipment - Quality system - Examination standards - Supervision of approved organizations Knowledge assessment As an option and on request: EASA E.examination (PART 66 and 147 E.exams).
RATE / AVAILABLE VERSION All regulatory documents are up-to-date with the latest issue
in force Version Duration (h) Rates (€) VAT Excl. 7 440
TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
25
Aviation Regulation
FRA 21G Military and State Regulation of Aircraft Fabrication, Engines and Components
OBJECTIVES - Understand the objectives of the FRA 21G, and the way it contributes to the continuing airworthiness of military and State aircraft. - Get familiar with the principles ruling the use and authoring of regulatory airworthiness documents. - This training provides the participants with a culture of State aviation regulation.
WHO SHOULD ATTEND Accountable Managers, Quality managers, certifying staff, and aircraft Continuing airworthiness managers.
TRAINING METHODS - On-site training - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy.
PROGRAMME Definition of Safety and Airworthiness State and Military regulatory environment in France and in Europe: -‐ French Decree N° 1551 from December 7th, 2006 Functions of the regulatory Authorities: - Functions of the Technical and Operational Authorities, DGA, DSAÉ, and the specific part played by the Quality Assurance of the approved organization. Principle ruling the certification of military and State aircraft Brief study of ministerial instruction fixing the essential requirements regarding continuing airworthiness military and state aircrafts and used by Customs, public safety and civil security Detailed study of PART 21G: Production Organization Approval (POA) - Facilities, human resources, certifying staff and production data - Security policy and Quality system - Conception/Fabrication prerogatives - Supervision Study of the MOE CRS (Certificate of Release to Service): - Privileges & Responsibilities -‐ Support documents (EMAR/FRA Form 1 & similar documents) Knowledge assessment
All regulatory documents are up-to-date with the latest issue in force.
RATE / AVAILABLE VERSION
Version Duration (h) Rates (€) VAT Excl. TRAINING MANAGER Laurent VALLIER 7 440
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
26
Aviation Regulation EMAR / FRA M/145
Military and State maintenance regulation
OBJECTIVES - Understand the objectives of the EMAR/FRA M/145, and the way it contributes to the continuing airworthiness of military and State aircraft and get familiar with the principles ruling the use and authoring of regulatory airworthiness documents. This training provides the participants with a culture of State aviation regulation.
WHO SHOULD ATTEND Accountable Managers, technical managers, certifying staff, technicians, supervisors. Individuals who wish to develop their basic knowledge in terms of aviation regulation, and the principles ruling application of military and State regulations in terms of aviation maintenance.
TRAINING METHODS - On-site training - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy.
PROGRAMME Definition of Safety and Airworthiness State and Military regulatory environment in France and in Europe:
- French Decree N° 1551 from December 7th, 2006 Functions of the regulatory Authorities:
- Functions of the Technical and Operational Authorities, DGA, DSAÉ, and the specific part played by the Quality Assurance of the approved organization. Principle ruling the certification of military and State aircraft Brief study of EMAR/FRA 21 and related Subparts:
- Layout of the regulatory document - Study of relevant Subparts
Brief study of Inter-ministerial Instruction related to continuing airworthiness (EMAR/FRA M, 145, 66 and 147)
EMAR/FRA M and related Subparts: - Scope of application, Continuing Airworthiness, Maintenance
standards, Components, Management and Certification of airworthiness
Detailed study of EMAR/FRA 145: Approved organization requirements
- Facilities, Human resources, Certifying staff, Maintenance data, Tools, Processes, Occurrence reporting…
- Safety policy and Quality system - Privileges of the maintenance organization - Supervision by the Authorities
Study of the MOE CRS (Certificate of Release to Service) and support documents:
- Privileges & Responsibilities - Support documents (EMAR/FRA Form 1 & similar documents) Annex:
- EDA: European Defence Agency - EMARs: European Military Airworthiness Requirements
RATES / AVAILABLE VERSIONS Knowledge assessment
Version Duration (hours) Rates (€) VAT Excl. All regulatory documents are up-to-date with the latest issue in force.
7 440
7 115 TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
27
Internal Quality Auditor PART 21 - M - 145 - 147- AIR OPS Approved Organizations
OBJECTIVES - Earn how to develop and implement an internal quality audit within a PART 21, M, 145, 147 or AIR OPS organization while complying with basic Quality standards (ISO 9001 and EN 9100 standard) and aviation regulatory requirements. - Participate in the management of risks while boosting performance.
WHO SHOULD ATTEND Quality assurance manager and staff who wish to develop and conduct audit programmes. Personnel who wish to be involved in the Quality process. Prerequisite: Successful completion of an initial training on Aviation regulation.
TRAINING METHODS - Documentation provided to the participants - Role-play exercices - EBT (Evidence Based Training) scenarios - For E-learning/Blended, consult our corporate policy for trainees.
PROGRAMME Quality related concepts: - What is quality about? - What is standardization about? - What is a standard about? - Certification and accreditation - Quality management - ISO and EN standards Quality audits: - Objectives - Categories and types of audits - Fundamental principles Audit process: - Planning - Preparation - Interviews - Audit report - Implementing and tracking corrective actions Auditor’s scope of competence: - Behaviors - Precautions Practical exercices: - From the audit preparation to the final report - Analysis and feedback on the participants’ behaviors
RATES / AVAILABLE VERSIONS
Version Initial training Recurrent training
Duration (h) Rates (€) VAT
Excl. Duration (h) Rates (€)
VAT Excl. All regulatory documents are up-to-date with the latest issue in force.
21* 1140 14* 540 * Including 1 day in E-learning
TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
28
Human Factors & SMS Awareness Human Factors & Safety Management System
OBJECTIVES - Understand the origins of errors, identify and avoid situations likely to generate human errors within one’s scope of work. - Make the trainee’s aware of his physiological and psychological limits, and improve the reliability and safety of all actors taking part in maintenance operations. - Become familiar with the Safety Management System (SMS) fundamentals.
WHO SHOULD ATTEND All personnel from EASA Part M and Part 145-approved organizations, and their related subcontractors.
TRAINING METHODS - Role-play and situational exercises - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy.
PROGRAMME Compliant with DGAC fascicles P54.45 and P50.11, and the latest issue of the Safety Management System implementation guidelines. - Generalities and introduction to Human Factors - Safety culture / organizational factors - Human errors - Human performance and limitations - Environment - Procedures, information, tools and their related use - Communication - Team work - Professionalism and integrity - Implementation of the Human Factors and SMS approach - Safety Management System awareness approach - Exchange of personal experiences
RATES / AVAILABLE VERSIONS
Version
Initial training
Recurrent training Duration
(h) Rates (€) VAT Excl.
Duration (h) Rates (€)
VAT Excl. 7 440 3.5 260
14 780 7 440
7 115 7 98
14 340 7 340 TRAINING MANAGER Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
29
Safety Management System Safety Management System
OBJECTIVES - Identify the principles ruling the management of existing or potential risks for flight safety within approved organizations. - Be able to implement an SMS approach within a team or department. - Become familiar with the concepts of safety and risk management.
WHO SHOULD ATTEND All personnel involved in an SMS approach within AIR-OPS, ATO, PART M/G or 145 organizations, airport management or support organizations and their related subcontractors. Managers, quality and safety technicians.
TRAINING METHODS - Case-studies based on real-life work experiences - Role-play and situational exercises - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy.
PROGRAMME - Introduction to the SMS - Safety fundamentals - The French National Safety Plan (NSP) - Organizational risks - The 4 cornerstones of ICAO - ICAO/EASA/DGAC requirements Core of the SMS:
- Identification of hazards and unexpected events, and their criticality
- Detection and tracking criteria for safety-related events
- Collection and Reporting tools for safety-related information
- Definition and implementation of actions - The sharing of responsibility with the SMS - Organizational models for companies SMS fundamentals:
- Safety culture - Safety policy and objectives - Risk management - Risk mapping - Ensuring continued safety - Promoting safety
Risk management in detail: - Methodology - Matrix of risks, and risk assessment
- Case studies based on practical scenarios and exercises - Safety and performance indicators - Reporting system for hazardous events and incidents - Study of the company corporate Safety Management System
manual (Optional) Knowledge assessment
RATES / AVAILABLE VERSIONS
Version
Initial training
Awareness training
Duration (h) Rates (€) VAT Excl. Duration (h) Rates (€)
VAT Excl. Compliant with Annex 19 of ICAO and DGAC Safety Management System implementation guidelines, and OSAC fascicles P 50.10 & 50.11, latest issues.
7 440 3.5 260 7 115 3.5 98 7 340 3.5 240
TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
30
Safety Management System Manager Safety Management System
OBJECTIVES - Be able to:
- Implement an efficient corporate SMS approach - Manage organizational risks on a corporate basis - Have an efficient “reporting” system - Use an efficient corporate communication on the subject
- Get familiar with the concepts of safety and risk management.
WHO SHOULD ATTEND Safety nominated Managers within AIR OPS, ATO, Part M/G or Part 145 approved organizations and airports.
TRAINING METHODS - Case-studies including open-ended questions - Documentation provided to the participants - EBT (Evidence Based Training) scenarios - For E-learning/Blended, consult our corporate training
policy
PROGRAMME Safety fundamentals The 4 cornerstones of ICAO, and ICAO/EASA/DGAC requirements Core of the SMS: - Identification of hazards and unexpected events, and their criticality - Detection and tracking criteria for safety-related events - Collection and Reporting tools for safety-related information - Definition and implementation of actions The sharing of responsibility with the SMS SMS implementation step by step: - Step 1: Planning - Step 2: Management board commitment - Step 3: Layout - Step 4: Identification of hazards - Step 5: Risk management - Step 6: Capacity to conduct investigations and audits - Step 7: Capacity to conduct safety analyses - Step 8: Promoting safety - Step 9: Documentation on the management of Safety and Information - Step 10: Supervising safety and monitoring performance Solutions available to implement an efficient SMS approach Knowledge assessment Compliant with ICAO Annex 19, DGAC Safety Management System implementation guidelines, and OSAC fascicles P 50.10 & 50.11, latest issues.
RATES / AVAILABLE VERSIONS
Version Initial training Recurrent training Duration
(h) Rates (€) VAT Excl. Duration
(h) Rates (€) VAT Excl.
7 440 TRAINING MANAGER
21 1140 Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
31
Safety Management System Expert Manager Safety Management System
OBJECTIVES Understand the principles ruling the prevention of accidents in civil aviation. Get familiar with the tools available to: assess the risks of accidents, deal with events through hazard detection, conduct investigations, report to relevant committees, compile final reports, track and assess all actions undertaken. Understand the need to promote the SMS, get the commitment of the whole personnel and allow for its optimum efficiency within one’s company.
WHO SHOULD ATTEND Safety nominated Managers within AIR OPS, ATO, Part M/G or Part 145 approved organizations. Personnel nominated as Human Factors/Flight Safety & SMS auditors/investigators within an organization or airport. Prerequisite: Successful completion of « SMS Manager » training
TRAINING METHODS - All exercises are carried out individually, discussed in pairs and concluded on a groupwork basis. Topics are provided either by the instructor or the trainees. - EBT (Evidence Based Training) scenarios.
PROGRAMME Practical considerations: - Regulatory framework of the SMS - Objectives and prevention of accidents - Practical operational conditions - How to get the commitment of the whole personnel within a company Practical conduct of an investigation: - Information related to an event, and hazard detection - Collection of useful and relevant information, and interviews with the different actors involved - Analysis (use of such tools as ADC, SHELL, MEDA, REASON model, etc.) - Proposed actions - Issuance of a work document intended for the SMS Committee - Issuance of a final report including all approved action - Tracking of the implemented actions - Management and use of related database records - Experience feedback towards all technicians - Conditions and principles ruling data exchanges outside the company - Recurrent assessment of the SMS implementation Knowledge assessment Compliant with ICAO Annex 19, DGAC Safety Management System implementation guidelines, and OSAC fascicles P 50.10 & 50.11, latest issues.
RATE / AVAILABLE VERSION
Version Duration (hours) Rates (€) VAT Excl. 21 1420
TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
32
How do airplanes fly? Theory and techniques Aviation techniques
OBJECTIVES - Identify the functions of the different systems of an airplane, and understand how they operate. Develop a sense of technical curiosity to make participants understand and integrate the regulatory safety requirements associated to aviation. - Allow participants to define their position within the “chain” of air transport, to reinforce their motivation in the conduct of their duties and assigned tasks.
WHO SHOULD ATTEND Commercial and technical managers, engineers, mechanics and administration employees. Individuals who wish to be provided with both a technical vocabulary and a general overview of the operational mode of airplanes, for a professional guidance towards airport, production, operation or maintenance trades. This training is specifically adapted to all employees who need to complement their integration process within a company.
TRAINING METHODS - Simulator sessions (ATR, Boeing 737 and Airbus 320): on site - Visit of airplanes included in a maintenance or production process: on site - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy
PROGRAMME - General description of an airplane
- Detailed description of a Toulouse/Paris flight on board an
Airbus A320
- Regulatory requirements applicable in flight
- Production and maintenance processes
- Principles of flight aerodynamics and mechanics
- Airframe (fuselage, wings, stabilizers, rudder and elevators)
- Flight controls (ATA 27, 55, 57)
- Fuel system (ATA 28)
- Hydraulic system (ATA 29)
- Electrical system (ATA 24)
- Cabin equipment and fire protection system (ATA 25, 26)
- Landing gears (ATA 32)
- Pneumatic and oxygen systems (ATA 21, 35)
- Turbine, piston and prop engines
- Flight instruments (ATA 22, 23, 34, 31)
- Practical exercises on flight and maintenance simulators: on
site
- Knowledge assessment
RATES / AVAILABLE VERSIONS
Version Duration (hours) Rates (€) VAT Excl. 21 980 21 780
TRAINING MANAGER Reynald DACHICOURT
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
33
Safety rules in maintenance workshops Aviation Techniques
OBJECTIVES - Be able to: - identify essential issues in terms of flight safety and personnel safety during maintenance operations conducted on aircraft.
- Remain aware of the fundamental principles related to the safety of personnel and property during maintenance operations.
- Promote a positive attitude concerning all steps taken to improve safety, and discourage all contrary practices.
WHO SHOULD ATTEND Technical or management personnel from production or maintenance organizations. Individuals who wish to work for an airline, a ground support company or a maintenance organization. This training is particularly adapted to newly recruited staff who need to complement their integration process within a company.
TRAINING METHODS - Practical exercises focusing on the acquisition of basic behaviours and best practices - Working at a heigh on aircrafts - Visit of aircraft on ground for maintenance purposes (on site) - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy.
PROGRAMME - Presentation of the work regulations applicable in France
and in Europe - INRS recommendations - Presentation of an aircraft, its systems and the associated
safety rules - Traffic plans and traffic rules applicable in aerodromes and
maintenance workshops - Notions of Security applicable in aerodromes and companies - Working at a heigh, explanations and practical exercices - Working rules related to Fuel Tank Safety - Safety working rules related to hydraulic systems - Safety working rules related to electrical systems (EWIS) - Safety working rules related to air conditioning and oxygen
systems - Safety working rules to comply with in the vicinity of radar,
laser or radio test operations - Fire-fighting rules - Safety rules related to the use of lifting and handling
equipment - Safety rules to comply with during jacking operations, and
influence on aircraft weight and balance - Case-studies focusing on the causes of incidents and
accidents - Personal and collective protection equipment - Responsibilities of all involved parties - Consequences of damage: flight safety and financial costs - Visit of a parking area and a maintenance workshop
(associated recommendations) - Knowledge assessment
RATES / AVAILABLE VERSIONS
Version Duration (hours) Rates (€) VAT Excl. 14 780 14 540
TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
34
Fuel Tank Safety & CDCCL Level 1 Aviation Techniques
OBJECTIVES - Understand and become familiar with the application of this regulation introducing the notions of Critical Design Configuration Control Limitations (CDCCL) and Airworthiness Limitation Items (ALI) into airworthiness data. - Provide participants with a technical knowledge in terms of Fuel Tank Safety (FTS).
WHO SHOULD ATTEND Quality and management personnel (as per ED 2009/006/R and ED 2009/007/R), involved in the maintenance or continuing airworthiness of fuel systems and aircraft impacted by these regulatory requirements.
TRAINING METHODS - Study of accident and incident reports on the subject - Examples of Airworthiness Directives and Service Bulletins - Study of relevant maintenance documents (AMM, CMM) - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy - EBT (Evidence Based Training) scenarios
PROGRAMME
- TWA 800 accident investigation report
- History of aircraft flammability reduction programme
- Notions of Critical Design Configuration Control Limitations
(CDCCL), and associated requirements
- Operational rules related to Fuel Tank Safety
- Maintenance rules related to Fuel Tank Safety
- Fuel tank inerting systems
- Production requirements (e.g. CS 25 and FAA 14CFR 25)
- Knowledge assessment
Compliant with UE 1321/2014.145.A.35 Appendice IV: Fuel tank safety training.
RATES / AVAILABLE VERSIONS
Version Duration (hours) Rates (€) VAT Excl. 3.5 260 3.5 98
3.5 240 TRAINING MANAGER Eric PELLETIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
35
Fuel Tank Safety & CDCCL Level 2 Aviation Techniques
OBJECTIVES Be able to: - Understand and become familiar with the application of this regulation introducing the notions of Critical Design Configuration Control Limitations (CDCCL) and Airworthiness Limitation Items (ALI) into airworthiness data. - Provide participants with a technical knowledge in terms of Fuel Tank Safety (FTS).
WHO SHOULD ATTEND Personnel in charge of the continuing airworthiness of aircraft and fuel systems impacted by these regulatory requirements (as per ED 2009/006/R and ED 2009/007/R).
TRAINING METHODS - Study of accident and incident reports on the subject - Examples of Airworthiness Directives and Service Bulletins - Study of relevant maintenance documents (AMM, CMM) - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy - EBT (Evidence Based Training) scenarios
PROGRAMME
- TWA 800 accident investigation report
- History of aircraft flammability reduction programme
- Implemented industrial solutions
- Analysis of work documents
- Notions of Critical Design Configuration Control Limitations
(CDCCL), and associated requirements
- Airworthiness Limitation Items (ALI) of the fuel system
- Production requirements: CS 25 and FAA 14 CFR 25
- Development of Part M and Part 145 AMC
- Operational rules related to Fuel Tank Safety
- Maintenance rules related to Fuel Tank Safety
- Fuel tank inerting systems
- Knowledge assessment
Compliant with UE 1321/2014.145.A.35 Appendice IV: Fuel Tank Safety training.
RATES / AVAILABLE VERSIONS
Version Initial training Recurrent training Duration
(h) Rates (€) VAT Excl. Duration
(h) Rates (€) VAT Excl.
8 440 3.5 260 TRAINING MANAGER Eric PELLETIER 8 115 3.5 98
8 340 3.5 240
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
36
EWIS Groups 1, 2, 3, 4, 5, 6
Electrical Wiring Interconnection Systems Aviation Techniques
OBJECTIVES Understand and become familiar with the application of EWIS regulation. Provide participants with a technical knowledge in terms of EWIS safety practices.
Programme
Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 B1 and B2 maintenance technicians involved in EWIS maintenance.
B1 ou B2 maintenance technicians carrying out EWIS inspections and tests.
Personnel from PART M/21/145 involved in the design of wire assemblies.
Personnel involved in maintenance operations such as replacement of a harness as an LRU.
PART M/145 Personnel from involved in the design of assemblies or the planning of maintenance tasks.
Personnel in proximity to aircrafts and could interfere with wiring systems.
A: General practices EWIS - -
B: Documentation on wiring practices - - -
C: Inspections -
D: Housekeeping philosophy
E: Electrical wires
F: Connective devices - - -
G: Repairs of connective devices - - - - -
Applicable regulation: EASA UE 1321/2014 145.A.30(e)
RATES / AVAILABLE VERSIONS ON-SITE TRAINING ELEARNING BLENDED
Group
Initial training
Recurrent training
Group
Initial training
Recurrent training
Group
Initial training
Recurrent training Duration
(h) Rates (€) VAT
excl. Duration
(h) Rates (€) VAT excl. Duration
(h) Rates (€) VAT Excl. Duration
(h) Rates (€) VAT Excl. Duration
(h) Rates (€) VAT Excl. Duration (h) Rates (€) VAT
Excl. 1 7 440 3.5 290 1 7 135 3.5 98 1 7 340 3.5 240 2 7 440 3.5 260 2 7 135 3.5 98 2 7 340 3.5 240 3 3.5 260 2 190 3 3.5 98 2 98 3 3.5 260 - - 4 5 440 2 190 4 5 105 2 87 4 5 340 - - 5 3.5 260 2 190 5 3.5 98 2 87 5 3.5 240 - - 6 2 190 2 190 6 2 87 2 87 6 - - - -
Consult our corporate training policy for both on-site and E-learning training duration.
TRAINING MANAGER
Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
37
Risks related to Foreign Object Damage (F.O.D) Aviation Techniques
OBJECTIVES - Provide participants with a basic knowledge of F.O.D. (Foreign Object Damage) - Identify and manage the different F.O.D. sources. - Implement appropriate means to fight against F.O.D. (Foreign Object Damage)
WHO SHOULD ATTEND Personnel who exercise their duties in proximity to aircraft (ramp, maintenance, safety) or within maintenance and production workshops. Personnel and managers in charge of the quality system.
TRAINING METHODS - FOD identification exercices - Study of accident and incident reports on the subject - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy.
PROGRAMME F.O.D. – Definitions and historical background Study of the different sources of F.O.D (Airports, Maintenance and Production Organizations). Concorde accident Rules of the Art Analysis of the different critical areas of aircraft, engines and equipment: - Landing gears - Engines - Flight controls - Probes - Cockpit / fuselage etc... Means implemented to eliminate F.O.D. in airports, Maintenance and Production Organizations: - Protected areas - Materials, equipment and tools - Checks and neutral stations - Plans and processes - Awareness Knowledge assessment Complies with EASA UE 1321/2014, EN 9100 V2016 and UE 139/2014 ADR requirements, latest issues. On request, this programme can be made relevant with the specificities of your company.
RATES / AVAILABLE VERSIONS
Version Duration (hours) Rates (€) VAT Excl.
3.5 260 2 87
3.5 240 TRAINING MANAGER Bruno BASTIDE
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
38
Aircraft maintenance training Licence 66 Ab Initio: B1.1, B1.2 & B2
Basic theorical training
OBJECTIVES - Enable participants, working in PART 145 or M approved organizations, to exercise their skills and duties (as Certifying staff) in Europe and its member States. - Prepare participants to the different exams included in Part 66 Licence (basic training).
WHO SHOULD ATTEND Personnel who need to be granted an EASA PART 66 licence. Qualified maintenance mechanics (PART 145) who wish to extend their knowledge on the subject. Former military mechanics who wish to move to a civilian professional activity.
TRAINING METHODS - Combination of theoretical courses and interactive presentations - On-site simulator sessions (ATR, Boeing 737 and Airbus A320) - On-site visits of aircrafts under maintenance or fabrication - Documentation provided to the participants - For E-learning/Blended, consult our corporate training policy
PROGRAMME - Module 1: Mathematics - Module 2: Physics - Module 3: Electricity basic principles - Module 4: Electronic Fundamentals - Module 5: Digital Techniques / Electronic Instrument Systems - Module 6: Materials and equipment - Module 7A: Maintenance Procedures - Module 8: Basic Aerodynamics - Module 9A: Human factors - Module 10: Aviation regulation - Module 11A: Turbine-engine Aircraft Aerodynamics, Structures and Systems - Module 11B: Pistons-engine Aircraft Aerodynamics, Structures and Systems - Module 13: Avionic Aerodynamics, Structures and Systems - Module 14: Propulsion - Module 15: Gas Turbine Engine - Module 16: Piston engine - Module 17A: Propellers
The training and its related exams are compliant with Appendix III of Annex III to EU 1321/2014 regulation, latest issue.
AIR FORMATION commitments: - Individual supervision of applicants, - Constant relationship with applicants, - Exam-tutoring via training tests.
Consult the table on the next page for the different
options and rates
TRAINING MANAGER Reynald DACHICOURT
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
39
Types of Licences: - Licence B1.1 Maintenance of mechanical and electrical systems on turbine-engine aircraft. - Licence B1.2 Maintenance of mechanical and electrical systems on piston-engine aircraft. - Licence B2 Maintenance of avionic and electrical systems.
Types of training at AIR FORMATION CFM66: Option 1: Independant candidate exams Option 2: E-learning + Exams Option 3: E-learning + Exams preparation + Exams Option 4: E-learning + Basic theorical training + Exams
Rates per module and per type of training:
Modules
Licence 66 Different option rates
B1.1 B2 B1.2
Option 1
Option 2
Option 3
Option 4
1 Mathematics Q Q Q 50 € 110 € 390 € 450 €
2 Physics Q Q Q 75 € 185 € 465 € 780 €
3 Electricity Q Q Q 75 € 185 € 465 € 670 €
4 Electronic Q Q 50 € 110 € 390 € 450 €
4 Electronic Q 75 € 185 € 465 € 890 €
5 Digital techniques Q 95 € 205€ 485 € 450 €
5 Digital techniques Q Q 60 € 120 € 400 € 890 €
6 Materials and Hardware Q Q 85 € 195 € 475 € 890 €
6 Materials and Hardware Q 85 € 195 € 475 € 450 €
7A Maintenance practices Q Q 115 € 465 € 885 € 890 €
7A Maintenance practices Q 105 € 405 € 825 € 890 €
8 Aerodynamics Q Q Q 50 € 110 € 250 € 340 €
9A Human Factors Q Q Q 80 € 170 € 450 € 560 €
10 Aviation Regulation Q Q Q 80 € 170 € 450 € 890 €
11A Turbine-engine Aircraft Aerodynamics, Structures and Systems
Q 145€ 495 € 915 € 1380 €
11B Pistons-engine Aircraft Aerodynamics, Structures and Systems
Q 145 € 445 € 865 € 1120 €
13 Avionic Aerodynamics, Structures and Systems Q 185 € 645 € 1185 € 2460 €
14 Propulsion Q 60 € 150 € 290 € 340 €
15 Gas turbine engine Q 105 € 235 € 515 € 1140 €
16 Pistons engines Q 105 € 235 € 515 € 890 €
17A Propellers Q Q 75 € 165 € 445 € 450 €
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
40
BEECH 90 / 200 / 1900 Series (PWC PT6) Theoretical – Practical training T1 / T2
Licence 66 – Type Rating
OBJECTIVES - Be able to conduct maintenance, repair and troubleshooting operations on all BEECH Series aircraft (PWC PT6). - Enable participants to exercise their skills and duties (as Certifying staff) within the scope of a PART 145 or PART M/F approval in Europe and its member States.
WHO SHOULD ATTEND Personnel who need to be granted a European EASA PART 66 Licence for issuance of CRS on BEECH Series aircrafts. Qualified mechanics (PART 145 or PART M/F) who need to extend their knowledge of the subject. Former military mechanics who move to a civilian professional activity.
TRAINING METHODS Theory: - Training course compliant with Levels I, II and III (ATA 104 Specification) - On-site simulator practice - Description of representative aircrafts parts and equipment - Electronic and/or paper documentation provided to the participant Practice: - Practical training conducted on aircraft within a PART 145 or M/F approved workshop - Use of specific aircraft tooling - Use of aircraft documentation
PROGRAMME - ATA 5/12, 20: General - Servicing - Maintenance practices - ATA 21: Air conditioning - ATA 22-23: Autoflight - Communications - ATA 24: Electrical power - ATA 25-26: Equipment/Furnishings - Fire protection - ATA 27: Flight controls - ATA 28: Fuel - ATA 30-31: Ice and rain protection - Indicating/Recording systems - ATA 32: Landing gear - ATA 33-34-35-36-38: Lights - Navigation - Oxygen - Water/Waste - ATA 51/57: Structure - ATA 61: Propellers - ATA 70/80: Power Plant - Examination Compliant with Regulation EU 1321/2014, Annex III, Appendix III, latest issue.
RATES / AVAILABLE VERSIONS
Type of aircraft
Duration (hours) *
Theoretical
Rates (€) VAT Excl.
Theoretical
Duration (hours) * Practical
Rates (€) VAT Excl. Practical Type
Beech 90 62.5 5580 64 3660 T1 TRAINING MANAGER Reynald DACHICOURT
Beech 200 62 5580 64 3660 T1
Beech 1900 67 5580 64 3660 T1 / T2
* Duration without theoretical exam and practical assessment.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
41
SOCATA TBM 700 Series (PWC PT6) Theoretical – Practical Training T1 / T2
Licence 66 – Type Rating
OBJECTIVES - Be able to conduct maintenance, repair and troubleshooting operations on SOCATA TBM 700 series aircraft (PWC PT6). - Enable participants to exercise their skills and duties (as Certifying staff) within the scope of a PART 145 or PART M/F approval in Europe and its member States.
WHO SHOULD ATTEND Personnel who need to be granted a European EASA PART 66 Licence for issuance of CRS on SOCATA TBM 700 Series (PWC PT6) aircraft. Qualified mechanics (PART M/F, 145) who need to extend their knowledge of the subject. Former military mechanics who move to a civilian professional activity.
TRAINING METHODS Theory: - Training course compliant with Levels I, II and III (ATA 104 Specification) - On-site simulator practice - Description of representative aircraft parts and equipment - EWIS techniques and security awareness (T2) - Electronic and/or paper documentation provided to the participants Practice: - Practical training conducted on aircraft within a PART 145 or M/F approved workshop - EWIS techniques and security awareness (T2) - Use of specific aircraft tooling - Use of aircraft documentation
PROGRAMME - ATA 5/12, 20: General - Servicing - Maintenance practices - ATA 21: Air conditioning - ATA 22-23: Autoflight - Communications - ATA 24: Electrical power - ATA 25-26: Equipment/Furnishings - Fire protection - ATA 27: Flight controls - ATA 28: Fuel - ATA 30-31: Ice and rain protection - Indicating/Recording systems - ATA 32: Landing gear - ATA 33-34-35: Lights - Navigation - Oxygen - ATA 51/57: Structure - ATA 61: Propellers - ATA 70/80: Power plant - Examination Compliant with Regulation EU 1321/2014, Annex III, Appendix III, latest issue.
RATES / AVAILABLE VERSIONS Version Series Duration
(hours)* Theoretical
RatesVAT Excl.Theor
etical
Duration (hours) * Practical
Rates VAT Excl.
Practical Type
TBM 700 61.5 4082 64 4082 T1 TRAINING MANAGER
Reynald DACHICOURT
TBM 700 51.5 3264 42 3264 T2
* Duration without theoretical exam and practical assessment.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
42
CESSNA C-208 (PWC PT6) Theoretical training - T1
Licence 66 – Type Rating
OBJECTIVES - Be able to conduct maintenance, repair and troubleshooting operations on all CESSNA C-208 (PWC PT6) - Enable participants to exercise their skills and duties (as Certifying staff) within the scope of a PART 145 or PART M/F approval in Europe and its member States.
WHO SHOULD ATTEND Personnel who need to be granted a European EASA PART 66 Licence for issuance of CRS on CESSNA C208 aircraft. Qualified mechanics (PART 145 or PART M/F) who need to extend their knowledge of the subject. Former military mechanics who move to a civilian professional activity.
TRAINING METHODS - Training course compliant with Levels I, II and III (ATA 104 Specification) - On-site simulator practice - Description of representative aircraft parts and equipment - Electronic and/or paper documentation provided to the participants
PROGRAMME - Location of aircraft components and systems - Ground service - Removal/Re-assembly of aircraft equipment and components - Troubleshooting - Use of documentation and MEL (if available): - ATA 5/12, 20: General - Servicing - Maintenance practices - ATA 21: Air conditioning - ATA 22-23: Autoflight - Communications - ATA 24: Electrical power - ATA 25- 26: Equipment/Furnishings - Fire protection - ATA 27: Flight controls - ATA 28: Fuel - ATA 30-31: Ice and rain protection - Indicating/Recording systems - ATA 32: Landing gear - ATA 33-34-35-36-38: Lights - Navigation - Oxygen - Water/Waste - ATA 51/57: Structure - ATA 61: Propellers - ATA 70/80: Power Plant - Examination
Compliant with Regulation EU 1321/2014, Annex III, Appendix III, latest issue. RATES / AVAILABLE VERSIONS
Version Duration (hours) * Rates (€) VAT Excl.
56 5040 TRAINING MANAGER Reynald DACHICOURT * Duration without theoretical exam and practical assessment.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
43
PT6A Series - Pratt & Whitney small / Medium / Large Theoretical training - T1
Licence 66 – Type Rating
OBJECTIVES - Be able to conduct maintenance, repair and troubleshooting operations on Pratt & Whitney PT6A Series engines (Large, Medium and Small Engines). - Enable participants to exercise their skills and duties (as Certifying staff) within the scope of a PART 145 or PART M/F approval in Europe and its member States.
WHO SHOULD ATTEND Personnel who need to be granted a European EASA PART 66 Licence for issuance of CRS on Pratt & Whitney PT6A Series engines. Qualified mechanics (PART 145 or PART M/F) who need to extend their knowledge of the subject. Former military mechanics who move to a civilian professional activity.
TRAINING METHODS - Training course compliant with Levels I, II and III (ATA 104 Specification) - On-site simulator practice - Description of representative aircraft parts and equipment - Electronic and/or paper documentation provided to the participants
PROGRAMME - ATA 70/80: Engine - ATA 71: Power plant - ATA 72: Air inlet – Compressor – Combustion chamber - Turbine - ATA 73: Engine – Fuel and Control - ATA 74: Ignition - ATA 75: Bleed air - ATA 76: Engine controls - ATA 77: Engine indicating - ATA 79: Oil - ATA 80: Starting - Examination
Compliant with Regulation EU 1321/2014, Annex III, Appendix III, latest issue. RATE / AVAILABLE VERSION
Version Duration (hours) * Rates (€) VAT Excl.
32 2980 TRAINING MANAGER Reynald DACHICOURT * Duration without theoretical exam and practical assessment.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
44
Gen Fam AIRBUS A318/A319/A320/A321
(CFM56) General Familiarisation
OBJECTIVES Understand the fundamentals of AIRBUS Single-Aisle aircraft family, to be able to define the general layout of the airframe, systems, power plant and maintenance practices.
WHO SHOULD ATTEND All categories of personnel (Design Office, Engineering and Documentation Departments, etc.) and more specifically personnel working within PART 21, M, 145, 147, OPS organizations, who need to develop their knowledge of this type of aircraft.
TRAINING METHODS - Training course compliant with Levels I, II and III (ATA 104 Specification) - On-site simulator practice - Description of representative aircraft parts and equipment - Electronic and/or paper documentation provided to the participants - For E-learning/Blended, consult our training policy.
PROGRAMME - ATA 5/12, 20: General - Servicing - Maintenance practices
- ATA 21: Air conditioning
- ATA 22 -23: Autoflight - Communications
- ATA 24: Electrical power
- ATA 25- 26: Equipment/Furnishings - Fire protection
- ATA 27: Flight controls
- ATA 28: Fuel
- ATA 29: Hydraulic power
- ATA 30: Ice and rain protection
- ATA 31: Indicating/Recording systems
- ATA 32: Landing gear
- ATA 33-34-35-36-38: Lights - Navigation - Oxygen -
Water/Waste
- ATA 45-46-47: Central Maintenance System, Inert Gas
System…
- ATA 49: APU
- ATA 70/80: Power plant
- Knowledge assessment
Compliant with Regulation EU 1321/2014, Annex III, Appendix III, latest issue.
RATES / AVAILABLE VERSIONS
Version Duration (hours) Rates (€) VAT Excl.
28 2980 TRAINING MANAGER
Reynald DACHICOURT 28 1870
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
45
Gen Fam BOEING 737 - 300/400/500
(CFM56) General Familiarisation
OBJECTIVES Understand the fundamentals of BOEING Single-Aisle aircraft family, to be able to define the general layout of the airframe, systems, power plant and maintenance practices.
WHO SHOULD ATTEND All categories of personnel (Design Office, Engineering and Documentation Departments, etc.) and more specifically personnel working within PART 21, M, 145, 147, OPS organizations, who need to develop their knowledge of this type of aircraft.
TRAINING METHODS - Training course compliant with Levels I, II and III (ATA
104 Specification) - On-site simulator practice - Description of representative aircraft parts and
equipment - Electronic and/or paper documentation provided to the
participants - For E-learning/Blended, consult our training policy
PROGRAMME - ATA 5/12, 20: General - Servicing - Maintenance practices
- ATA 21: Air conditioning
- ATA 22 -23: Autoflight - Communications
- ATA 24: Electrical power
- ATA 25- 26: Equipment/Furnishings - Fire protection
- ATA 27: Flight controls
- ATA 28: Fuel
- ATA 29: Hydraulic power
- ATA 30: Ice and rain protection
- ATA 31: Indicating/Recording systems
- ATA 32: Landing gear
- ATA 33-34-35-36-38: Lights - Navigation - Oxygen -
Water/Waste
- ATA 45-46-47: Central Maintenance System, Inert Gas
System…
- ATA 49: APU
- ATA 70/80: Power plant
- Knowledge assessment
Compliant with Regulation EU 1321/2014, Annex III, Appendix III, latest issue.
RATES / AVAILABLE VERSIONS
Version Duration (hours) Rates (€) VAT Excl.
TRAINING MANAGER Reynald DACHICOURT
28 2980 28 1870
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
46
Gen Fam BEECH 90 / 200 / 1900 Series
(PWC PT6) General Familiarisation
OBJECTIVES Understand the fundamentals of BEECH 90/200/1900 Series aircraft family, to be able to define the general layout of the airframe, systems, power plant and maintenance practices.
WHO SHOULD ATTEND All categories of personnel (Design Office, Engineering and Documentation Departments, etc.) and more specifically personnel working within PART 21, M, 145, 147, OPS organizations, who need to develop their knowledge of this type of aircraft.
TRAINING METHODS - Training course compliant with Levels I, II and III (ATA 104 Specification) - On-site simulator practice - Description of representative aircraft parts and equipment - Electronic and/or paper documentation provided to the participants.
PROGRAMME - ATA 5/12, 20: General - Servicing - Maintenance practices
- ATA 21: Air conditioning
- ATA 22 -23: Autoflight - Communications
- ATA 24: Electrical power
- ATA 25- 26: Equipment/Furnishings - Fire protection
- ATA 27: Flight controls
- ATA 28: Fuel
- ATA 30-31: Ice and rain protection - Indicating/Recording
systems
- ATA 32: Landing gear
- ATA 33-34-35-36-38: Lights - Navigation - Oxygen -
Water/Waste
- ATA 51/57: Structure
- ATA 61: Propellers
- ATA 70/80: Power plant
- Knowledge assessment
Compliant with Regulation EU 1321/2014, Annex III, Appendix III, latest issue.
RATES / AVAILABLE VERSIONS Version Beech Series Duration (hours) Rates (€) VAT Excl.
TRAINING MANAGER Reynald DACHICOURT
90 /200 21 2170 1900 28 2570
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
47
Gen Fam SOCATA TBM 700 Series (PWC PT6)
General Familiarisation
OBJECTIVES Understand the fundamentals of SOCATA TBM 700/850 (PWC PT6) aircraft family, to be able to define the general layout of the aircraft, its systems, engines and maintenance practices
WHO SHOULD ATTEND All categories of personnel (Design Office, Engineering and Documentation Departments, etc.) and more specifically personnel working within PART 21, M, 145, 147, OPS organizations, who need to develop their knowledge of this type of aircraft.
TRAINING METHODS - Training course compliant with Levels I, II and III (ATA 104 Specification) - On-site simulator practice - Description of representative aircraft parts and equipment - Electronic and/or paper documentation provided to the participants.
PROGRAMME - ATA 5/12, 20: General - Servicing - Maintenance practices - ATA 21: Air conditioning - ATA 22-23: Autoflight - Communications - ATA 24: Electrical power - ATA 25-26: Equipment/Furnishings - Fire protection - ATA 27: Flight controls - ATA 28: Fuel - ATA 30-31: Ice and rain protection - Indicating/Recording systems - ATA 32: Landing gear - ATA 33-34-35-36-38: Lights - Navigation - Oxygen - Water/Waste - ATA 51/57: Structure - ATA 61: Propellers - ATA 70/80: Power plant - Knowledge assessment Compliant with Regulation EU 1321/2014, Annex III, Appendix III, latest issue.
RATE / AVAILABLE VERSION
Version Duration (hours) Rates (€) VAT Excl.
21 2370 TRAINING MANAGER Reynald DACHICOURT
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
48
Gen Fam PT6A Series
Pratt & Whitney Small / Medium / Large Engine General Familiarisation
OBJECTIVES Understand the fundamentals of PT6A Series engines, to be able to define their general layout, their systems and maintenance practices.
WHO SHOULD ATTEND All categories of personnel (Design Office, Engineering and Documentation Departments, etc.) and more specifically personnel working within PART 21, M, 145, 147, OPS organizations, who need to develop their knowledge of this type of engine.
TRAINING METHODS - Training course compliant with Levels I, II and III (ATA 104 Specification) - Description of representative aircraft parts and equipment - Electronic and/or paper documentation provided to the participants
PROGRAMME
- ATA 70: Engine presentation and Standard Practices -
Performances
- ATA 71: Power plant
- ATA 72: Air inlet – Compressor – Combustion chamber -
Turbine
- ATA 73: Engine – Fuel and control
- ATA 74: Ignition
- ATA 75: Bleed air
- ATA 76: Engine controls
- ATA 77: Engine indicating
- ATA 79: Oil
- ATA 80: Starting
- Knowledge assessment
Compliant with Regulation EU 1321/2014, Annex III, Appendix III, latest issue.
RATE / AVAILABLE VERSION
Version Duration (hours) Rates (€) VAT Excl.
18 1500 TRAINING MANAGER Reynald DACHICOURT
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
49
PART 145 Aircraft Mechanic Assistant Operational Maintenance
OBJECTIVES - Ensure the continuing airworthiness of aircraft in compliance with the regulations in force and aviation culture. - Assimilate the knowledge, know-how and know-how-to-be required within the technical scope of the subjects that are taught. - This training course allows participants to have their basic knowledge validated by a PART 147-approved organization.
WHO SHOULD ATTEND Employed or self-employed applicants holding an educational level from type IV or V (French Ministry of National Education), with a good technical background (mechanics, electricity, electrical engineering or industrial maintenance), methodology, professional rigor and dedication relevant with the requirements of air trades. Basic skills (reading, writing and maths) must be managed, in addition to basic English language skills.
TRAINING METHODS - Training course compliant with Levels I, II and III (ATA 104 Specification) - Description of representative aircraft parts and equipment - Electronic and/or paper documentation provided to the participants.
PROGRAMME Theoretical training: 224 hours - EASA Aviation Regulation: 7 hours - Human Factors and Safety Management System: 14 hours - Aircraft systems and components (ATA): 119 hours - Rules of the art for aircraft mechanics: 14 hours - Fuel Tank Safety & CDCCL: 8 hours - EWIS (Electrical Wiring Interconnection System): 7 hours - Aeronautical technical English: 56 hours - Knowledge assessment Practical training: 226 hours Provided within a PART 147-approved training and examination organization. - Skills assessment On-The-Job training: 150 hours Provided within a PART 145-approved organization.
RATE / AVAILABLE VERSION
Version Duration (hours) Rates (€) VAT Excl.
TRAINING MANAGER
Reynald DACHICOURT 600 6780
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
50
Safety over Parking areas / Marshalling Airport Safety
OBJECTIVES Be able to:
- Know and apply the regulatory requirements in terms of aviation and flight safety.
- Remain aware of the fundamental principles related to the safety of personnel and property within airports. - Promote a positive attitude towards all steps taken to improve safety, and discourage all contrary practices.
WHO SHOULD ATTEND
Personnel who wish to work for an airline, a ground handling company, an airport or a maintenance organization. Personnel with duties directly related to aircraft (groundhandling, ground service, line maintenance...) Airline or airport management personnel.
TRAINING METHODS - Study cases based on real-life work experiences - Documentation provided to the participants - Practical exercises on parking areas - For E-learning/Blended, consult our training policy.
PROGRAMME - Flight safety - General safety rules applicable over parking areas - Traffic rules - Marshalling: Safety rules to comply with upon aircraft arrival - Refuelling operations - Cargo loading - Pre- and Post-flight walkaround checks - Service equipment - Practical study of conventional gestures upon aircraft arrival and departure - Knowledge assessment - Skills assessment
Compliant with the CQP (French professional qualification certificate) of FNAM (National Federation of commercial aviation) UE 139/2014 ADR latest issue.
RATES / AVAILABLE VERSIONS
Version Duration (hours) Rates (€) VAT Excl. 21 1040 21 840 4 98
TRAINING MANAGER Eric PELLETIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
51
Aircraft De-icing Airport Safety
OBJECTIVES Be able to: - Become familiar with the regulations (AIR OPS & SAE) and standards in force in terms of de-icing and anti-icing operations, and hold-over times. - Acquire the knowledge required to conduct de-icing and anti-icing operations on aircraft (weather forecast, operations and checks).
WHO SHOULD ATTEND Personnel from airlines or ground handling companies involved in de-icing operations.
TRAINING METHODS - Study cases based on real-life work experiences - Practical exercises conducted on aircraft with de-icing equipment - Documentation provided to participants - For E-learning/Blended, consult our corporate training policy
PROGRAMME - ICAO, AIR OPS and SAE regulation - Relevant weather pattern knowledge - Techniques to recognize frosted precipitations on critical surfaces - Notions of aircraft aerodynamics and performance - Effects of frost, ice, snow, sleet or fluid on aircraft performance - De-icing and anti-icing fluids characteristics - De-icing and anti-icing general procedures - Aircraft types of control after treatment - De-icing and anti-icing equipment usage procedures - Fluids application methods and procedures - Use and limitations of protection time board - Ground-flight deck communication (ICAO conventional phraseology) - Quality assurance program - Health effects, safety precautions and accident prevention - Environmental considerations - Emergency procedures - Experience feedbacks - Practical exercises conducted on aircraft with de-icing materials (if practicable) - Knowledge assessment Compliant with ICAO Manual of Aircraft Ground De-icing/anti-icing operations (Doc 9640) and SAE AS6386 (Training and qualification program for de-icing/anti-icing of aircraft on the ground) programs latest issues.
RATES / AVAILABLE VERSIONS
Version
Initial training
Recurrent training Duration
(h) Rates (€) VAT Excl. Duration
(h) Rates (€) VAT Excl.
35 1780 7 440 14 180 7 115
35 940 7 340 TRAINING MANAGER Eric PELLETIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
52
Aircraft pushback and towing operations (aeroplanes, helicopters)
Airport Safety OBJECTIVES Get familiar with: - The regulatory procedures and rules-of-the-art applicable to aircraft pushback and towing operations - The safety instructions related to towing operations - The principles ruling application of the safety instructions related to aerodrome traffic - Acquire the required skills to carry out aircraft pushback and towing operations.
WHO SHOULD ATTEND Personnel working for airlines or ground handling companies in charge of towing operations.
TRAINING METHODS Theory - Study cases based on real-life work experience - Documentation provided to the participants - For E-learning/Blended, consult our training policy
Practice - Description and presentation of equipment and vehicles (tractors, bars…) - Individual traffic demonstrations along pre-defined tracks - Individual towing exercises over the manoeuvring area - Skills assessment
PROGRAMME Theory: - Aerodrome safety – General Background - Applicable regulations - General safety rules applicable over manoeuvring areas - Technology of towing vehicles - Traffic rules for ramp vehicles and equipment - Safety rules to comply with during towing operations - Required staff and equipment. Safe preparation, achievement and completion of towing operations. Actions to undertake in case of incidents - Experience feedbacks - Knowledge assessment
Practice (on site): - Presentation of manoeuvring areas and associated aerodrome signs - Description and presentation of equipment and vehicles (tractors, bars…) - Towing operations: traffic demonstrations along pre-defined tracks and application of the theoretical knowledge - Individual towing exercises over the parking area - Skills assessment via the practical towing exercise Compliant with the CQP (French professional qualification certificate) of FNAM (National Federation of commercial aviation). Compliant with INRS recommendation R463.
RATES / AVAILABLE VERSIONS
Version
Initial training
Recurrent training Duration
(h) Rates (€) VAT Excl. Duration
(h) Rates (€) VAT Excl.
21 1640 11 780 21 1140 11 780
TRAINING MANAGER Eric PELLETIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
53
Ab-initio (Initial Training)
OBJECTIVES To familiarize trainees with the aircraft environment
To acquire sufficient general knowledge and basic proficiency required to perform their duties.
To undertake the responsibilities related to the safety of passengers and the aircraft during normal operations, abnormal incidents and emergency procedures.
TRAINING METHODS Face to face or Blended The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Based Training (EBT)
PROGRAMME
Training program in accordance with: Air Ops 965/2012 - ORO.CC.120 & 290/2012 – CC.TRA.220
MANDATORY (110h Theory + Practice) - General theoretical knowledge of aviation and aviation
regulations - Duties and responsibilities of cabin crew - Communication - Introductory course on Human Factors (HF) and Crew
Resource Management (CRM) - Passenger handling and cabin surveillance - Aero-medical aspects and first aid - Dangerous Goods * - Security - Fire and smoke training - Survival - Electrical Wiring Interconnection System (EWIS) - Aircraft surface contamination - Familiarisation with the cockpit environment (Radio,
communication, Oxygen masks…) - Final Practical assessment
Optional (15h) - Grooming - Self-Defence - Service on board
Water Survival
Self-Defence
First Aid
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
54
Ab-initio (Initial Training)
POSSIBLE EXAMPLE OF BLENDED SCHEDULE (blended training based on 6 to 8 trainees) Day 1
Review of Elearning modules SEP Modules - Walkaround - Basic Aeronautics - Air-Ops Regulation - Normal flight - Safety equipment - Decompression/turbulences
- Fire and smoke - Emergency procedures - Survival - Security - EWIS group 8 - Aircraft contamination - Dangerous Good* *In partnership with Butterfly training
CRM Module As per program (EU) N°965/2012 - AMC1. ORO.CC.115&215 FIRST AID Module As per program (EU) N°290/2012 Annex V, Part CC (Appendix 1)
Day 2 Day 3
Evidence Based Training (EBT) on Emergency procedures & CRM ( part 1)
Evidence Based Training (EBT)
on Emergency procedures & CRM ( part 2)
Evidence Based Training (EBT) on Security & Dangerous Goods
Day 4
Evidence Based Training (EBT) on Survival Evidence Based Training (EBT) on First aid
DURATION Blended Mandatory: 110h (82h + 28h) Blended Mandatory + Optional: 125h Face to face: On request
RATES / VERSIONS AVAILABLE TRAINING MANAGER
Stéphanie CHEVALLIER
Version Duration (hours) Rates (€) VAT Excl. 110 without option 1990 125 with option 2500
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
55
Recurrent Training
OBJECTIVES To provide the required annual ground training relevant to the type or variant of aircraft on which he/she operates, including training on the location and use of all emergency and safety equipment carried in order to demonstrate competence in carrying out normal, abnormal and emergency procedures.
TRAINING METHODS Face to face or Blended or E-learning The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Based Training (EBT)
PROGRAMME - Tailored according to your type of operation - Refer to the following catalogue pages: SEP; First Aid, ATR Type Rating As per EASA regulation (EU) N°965/2012 - Part ORO.FC.230 & Part ORO.CC.140)
RATES / VERSIONS AVAILABLE
Version Duration (hours) Rates (€) VAT Excl.
3.5 h or 7 h or Tailored Tailored
3.5 h or 7 h or Tailored Tailored
TRAINING MANAGER Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
56
SECURITY
OBJECTIVES To be able to contribute to Aviation Security, Identify security threats, follow and promote correct practices, respond accordingly to unlawful interference, in accordance with Regulation (EC) No 300/2008.
TRAINING METHODS Blended or E-learning. The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Based Training (EBT).
PROGRAMME - Introduction to aviation security - Security & transportation - Disruptive passenger & conflict management - Hijacking - Bomb threat on board - Evidence Based Training (EBT) scenarii
RATES / VERSIONS AVAILABLE
Version Duration (hours) Rates (€) VAT Excl. 7 340 3.5 98
TRAINING MANAGER Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
57
SEP EQUIPMENT
OBJECTIVES To be able to: identify each safety and emergency equipment item onboard, their use and the procedures associated with their operation.
TRAINING METHODS Face to face or E-learning The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Based Training (EBT)
PROGRAMME Pre-flight check & appropriate use of the following safety Equipment on board Fire fighting Equipment - Fire extinguishers - Portable Breathing Equipment (PBE) - Axes an/or crow bar - Lavatory automatic extinguisher - Lavatory smoke detector - Lithium battery kit (if any) Abnormal and Emergency situation Equipment - Manual Release Tool (MRT) - Portable Oxygen bottle - Oxygen masks (Flight & Cabin crew) - Flash light - Megaphone - Adult Life jacket - Portable Emergency Locator Transmitter (ELT) - Fixed ELT Survival situation Equipment - Doors & Exit types - Evacuation devices - Survival kit - Signaling Equipment First aid Equipment Additional Specific Equipment to the airline
RATES / VERSIONS AVAILABLE
Version Duration (hours) Rates (€) VAT Excl. 4 440 4 98
TRAINING MANAGER Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
58
SEP (Safety & Emergency Procedures) TRAINING
OBJECTIVES TRAINING METHODS
Face to face or Blended or Elearning The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Based Training (EBT)
To be able to:
- identify each safety and emergency equipment item onboard, their use and the procedures associated with their operation.
- detect and properly fight a fire situation on board an aircraft.
- identify hazards associated with turbulences and apply appropriate procedures in orderto ensure passenger and crew safety.
- identify all types of emergency evacuation, in addition to the crew and procedures related to different types of emergency situations.
PROGRAMME
E-learning Face to Face Blended
SEP Equipment 4h 4h -
Fire on board 3.5h 7h 3.5h + 3h
Decompression 2h 3h 2h + 1h
Planned & Unplanned Emergency procedures 3.5h 7h 3.5h + 3h
RATES / VERSIONS AVAILABLE
Duration (hours) Rates (€) Duration
(hours) Rates (€) Duration
(hours) Rates (€)
Version 7 440 4 98 - - 4 270 3.5 98 6.5 340 3 260 2 75 3 230
TRAINING MANAGER Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
59
AIR-OPS
OBJECTIVE To provide Cabin crew with general knowledge of the European regulation (N° 965/2012) for Airline operations.
TRAINING METHODS
Face to Face or Elearning
PROGRAMME
Air-Ops generality
Annex II- Part ARO (Authority Requirements for Air Operations)
Annex III Part ORO (Organisation Requirements for air Operations)
Annex IV Part CAT (Commercial Air Transportion operation)
Annex V Part SPA (Specific Agreement)
Air Crew Part CC (Cabin Crew)
Air Crew Part ARA (Authority Requirements for Aircrew)
RATES / VERSIONS AVAILABLE
Version Duration (hours) Rates (€) VAT Excl.
3.5 260 TRAINING MANAGER Stéphanie CHEVALLIER
4 98
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
60
Crew Resource Management Cabin Crew
OBJECTIVES To enhance the communication and management skills of the crew member, as well as the importance of effective coordination and two-way communication between all crew members by improving awareness of personal physiological and psychological limits and obtaining an understanding of the origin of errors.
TRAINING METHODS
Face to face or Blended or E-learning The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Based Training (EBT)
PROGRAMME Training course compliant with the EASA requirements specified in Annex V, Part-CC to Regulation (EU) N°290/2012 & (EU) 965/2012 last edition AMC1.ORO. CC.115&215.
PROGRAMME - General instructions on CRM principles and objectives
- Human performance and limitations
- TEM (threat and error management)
- Human error & violations
- Information acquisition and processing
- Attitude and behaviors, personality awareness
- Workload
- Stress handling
- Management of passenger human factors (crowd control,
stress, conflict, medical…)
- Fatigue and vigilance
- Communication & culture differences
- Coordination
- Leadership & Assertiveness
- Decision making & Situation awareness
- Resilience development
- Surprise and startle effect
- Introduction to SMS (Safety management System) & Cabin
safety reporting
- Case study
RATES / VERSIONS AVAILABLE
Version Duration (hours) Rates (€) VAT Excl. 7 440 10.5 440
7 115
TRAINING MANAGER Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
61
Crew Resource Management Flight crew
OBJECTIVE To enhance the communication and management skills of the flight crew member concerned. Emphasis is placed on the non-technical knowledge, skills and attitudes of flight crew performance as mentionned in GM1 ORO.FC.115
TRAINING METHODS
Face to face or Blended or Elearning
The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Based Training (EBT)
PROGRAMME Training course compliant with EASA requirements specified in Annex III, Part-ORO.FC to Regulation (EU) N°965/2012, AMC1.ORO.FC.115 & 215 and AMC2.ORO.FC.115.
PROGRAMME Flight crew CRM training - Human factors in aviation - General instructions on CRM principles and objectives - Human performance and limitations - Threat and error management - Personality awareness, human error and reliability, attitudes and behaviour, self assessment and self critique - Stress and stress management - Fatigue and vigilance - Assertiveness, situation awareness, information acquisition and processing - Automation and philosophy on the use of automation - Specific type-related differences - Monitoring and intervention - Shared situation awareness, shared information acquisition and processing - Work management - Effective communication and coordination inside and outside the flight crew compartment - Leadership, cooperation, synergy, delegation, decision making, actions - Resilience development - Surprise and startle effects - Culture differences - Effective communication and coordination with other operational personnel and ground service - Introduction to SMS (Safety Management System) - Cases studies For Single Pilot Operations (SPO) Flight Crew, programme can be adapted to 6 hours on demand. Please contact us.
RATES / VERSIONS AVAILABLE
Version Duration (hours) Rates (€) VAT Excl. 18 1100
18* 850
*: 18 h for multi-pilot operations
TRAINING MANAGER Laurent VALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
62
Aero-Medical Aspects & First Aid
OBJECTIVES To provide initial and/or refreshing knowledge and skills on First Aid as p, Part CC (Appendix 1) to Regulation (EU) N°290/2012
TRAINING METHODS Face to face or Blended or E-learning The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Based Training (EBT)
PROGRAMME
Principles of first-aid Assessing a casualty Life saving procedures Principles of resuscitation & Primary actions - Opening the airway - Recovery position - Check breathing - Check for circulation - Choking - CPR / AED Medical problems - Respiratory disorders - Cardiovascular disorders - Nervous system disorders - Ear, nose problems (barotrauma) - Abdominal problems - Behavioral problems - Trauma related problems - Other problems (diabetes, allergic reactions, pregnancy) Medical supplies on board
RATES / VERSIONS AVAILABLE
Version Duration (hours) Rates (€) VAT Excl. 21 980 14 540 7 135
TRAINING MANAGER Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
63
Self-Defence Course
OBJECTIVES To be able to protect ourself during a situation of physical aggression on board and, if necessary, to control an aggressive passenger using physical intervention.
TRAINING METHODS Face to face The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Based Training (EBT).
PROGRAMME
- Introduction to Self-Defence: statistics & regulations - Warm up exercices & body functionning - Self-Defence techniques
- Face to face attacks - Lateral attack - Frontal throat attack - Back throat attack - Crew on ground - Tools for attacker immobilization - Releasing another crew member (in the cabin and in the cockpit)
- Conclusion For Instructor Self-Defence, refer page 12.
RATE / VERSION AVAILABLE
Version Duration (hours) Rates (€) VAT Excl. TRAINING MANAGER Stéphanie CHEVALLIER 5 340
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
64
Survival & Water Survival in Real Environment
OBJECTIVES - To familiarise with principles of survival in hostile environments (e.g. polar, desert, jungle, sea) - To practice water survival in real environnent conditions Training course compliant with EASA requirements specified in Annex V, Part CC to Regulation (EU) N°290/2012
TRAINING METHODS Face to face or Blended or Elearning The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Based Training (EBT) - Protective equipment provided when water under 20°C - Availability of relevant personal to ensure complete safety
PROGRAMME
From April to October (3.5h) - Use of a life raft (12 pax) in real condition (On lake) - Use of real life jackets - Survival exercices in water - Actual handling and shooting of pyrotechnics (various flares) - Basic principles of Survival on ground From November to March (2h) - Use of a life raft (6 pax) in a pool - Use of real life jackets - Survival exercices in water
RATES / VERSIONS AVAILABLE
Version Duration (hours) Rates (€) VAT Excl. TRAINING MANAGER
Stéphanie CHEVALLIER 3.5 440
340 pool
7 440 lake
3.5 98
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
65
Fire Fighting & Smoke Contamination OBJECTIVE Be able to manage efficiently any type of fire situation on board as per Regulation 965/2012 and 290/1012
TRAINING METHODS Face to face or Blended or Elearning The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Based Training (EBT)
PROGRAMME
- Realistic and practical training in the use of all fire-fighting equipment - Emphasis on the responsibility of crew to deal promptly with emergencies involving fire & smoke and in particular emphasis on the importance of identifying the actual source of fire - Importance of passing correct information - Use of appropriate type of extinguishing agents and procedures for particular fire situations - Techniques of application of extinguishing agents and consequences of misapplication - The effects of smoke in an enclosed area and actual use of all relevant equipment in a simulated smokefilled environment - Donning and use of PBE in an enclosed simulated smoke-filled environment - Extinguishing a real fire (Class A, D & B)* including drills on lithium battery fire fighting *Class B fire according to weather conditions
RATES / VERSIONS AVAILABLE
Version Duration (hours) Rates (€) VAT Excl. 7 340
3.5 98 TRAINING MANAGER
Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
66
ATR Type Rating Course
OBJECTIVE To familiarize you with the ATR aircrafts so that so that you can gain confidence and operate the aircraft’s different functions on board as per Air-Ops regulation ORO.CC.125 and ORO.CC.130
TRAINING METHODS Face to face or Blended or Elearning The totality of our on-site training is above all operational and in complete adequacy with the real conditions of crew daily operation. AIR FORMATION concentrates its pedagogical means in this direction, putting into practice all subjects in the form of Evidence Based Training (EBT)
PROGRAMME
- ATR aircraft description - ATR safety equipment - ATR Systems - Doors and exits operation - Emergency procedures - Evacuation devices
RATES / VERSIONS AVAILABLE
Version Duration (hours) Rates (€) VAT Excl. 14 780 14 540
7 135 TRAINING MANAGER
Stéphanie CHEVALLIER
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
67
SKILLS ASSESSMENT Technical and non-technical
OBJECTIVES Technical and non technical skills assessment of maintenance technicians in order to determine the profession practical expertise level. Assessed skills are: - Technical: Knowledge, manual dexterity, following procedures, using tools. - Non technical: Leadership and teamwork, situation awareness, managing workload, communication, decision-making.
WHO SHOULD ATTEND Personnel whose skills assessment for employment is essential. PART 145 maintenance personnel as part of recurrent training.
REGULATORY REFERENCE The assessment program makes reference to EASA PART 145.A.30 & 35 requirements.
PROGRAMME Personnel skills assessment is divided into three actions: 1. Individual self-assessment by the personnel as per an established skills matrix. 2. Theoretical and practical assessment made by an assessor from AIR FORMATION: - Skills assessment through multiple choices test - Skills assessment through practical and situational (EBT) exercices. - Personal interview 3. Evaluation of results and solution suggestions. Skills assessment is customizable regarding customer demand and needs. Assessments are tailored to all fields: - Regulation - Human factors - Safety management - Technician rules of the art - Aircraft systems and circuits: use and operation - Technical defects definition - Tooling use - Technical documentation use (whether paper or electronic) - English language
RATE / AVAILABLE VERSION
Version Duration (hours) Rates (€) VAT Excl.
3h
TRAINING MANAGER
Laurent VALLIER
/ trainee Contact us
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
68
ASSESSMENT TEST Technical English for Aviation Maintenance
OBJECTIVES - Assess your level of English in a rapid and efficient way. - Determine your on-site training needs. - State your level of English to both your organization managers and to the aviation Authorities.
WHO SHOULD ATTEND All personnel from maintenance organizations using technical English documentation, maintenance and repair manuals. Prerequisite: Be able to read, write and understand the English language used in aviation technical documentations.
TESTING OPTIONS - General Maintenance:
- 50 MCQ Placement Test - 50 MCQ Placement Test from a mixed question bank - 100 MCQ Placement Test
- Airframe - 50 MCQ Placement Test - Electricity - 50 MCQ Placement Test - Powerplant - 50 MCQ Placement Test
TEST LAYOUT 3 main sections
- Vocabulary / Grammar - Expression - Comprehension
Tested skills - Reading skills - Writing skills - Comprehension skills
These placement tests are compliant with Regulation (EU) No 1321/2014 and FAA 14 CFR Part 145 in terms of English language proficiency.
RATES / VERSIONS AVAILABLE Version Duration (hours) Rates (€) VAT Excl. 1 50* 2 65**
*(50 MCQ) **(100 MCQ)
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
69
SPACE RENTAL
AIR FORMATION Located at 5 minutes walking distance from Blagnac airport, Air Formation offers you a 7/7 greeting, perfectly suited to the organization of all your meetings, training, seminars, professional cocktail parties, incentives, team building, conferences, shows, networking events, committees... The meeting venues are available for rent on a half-day or full-day basis, 24/7.
EQUIPMENT - WIFI Internet connection - Flat TV screen - Air conditioning - Individual tables and chairs - White board / paper board - Coffee break items
CONFIGURATION The configuration and setting of our professional spaces can be suited to your needs: U, V, L shape styles, clusters or cross-pattern style, standard classroom style. You can also modulate the room setting according to your needs (decoration, furnitures...)
ADDITIONAL SERVICES Beverages, meals and catering available.
CLOUD 9 ½ A380
Total area M2 67 Total area M2 72 Capacity 35 Capacity 70 Rate 1 day (VAT Excl.) 450 Rate 1 day
(VAT Excl.) 380
Rate ½ day (VAT Excl.) 275 Rate ½ day
(VAT Excl.) 250
John F. KENNEDY KUALA LUMPUR
Total area M2 32 Total area M2 32
Capacity 16 Capacity 27
Rate 1 day (VAT Excl.) 165 Rate 1 day
(VAT Excl.) 165
Rate ½ day (VAT Excl.) 110 Rate ½ day
(VAT Excl.) 110
SAFETY Cabin CONTACT [email protected] Phone: +33 (0)5 34 47 18 38 For evening and week-end rates, please contact us. Do not hesitate to ask for our detailed brochure.
Total area M2 28
Capacity 28
Rate 1 day (VAT Excl.) 165
Rate ½ day (VAT Excl.) 110
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
70
Simulators & Educational Mock-ups Rent AIR FORMATION Unique in Europe, discover our training tools available for you. Six simulators and three workshops to make learning an incredible experience.
EQUIPMENT Real conditions for training sessions and pragmatic exercices. These equipments will be used under an AIR FORMATION supervisor.
SAFETY Cabin Simulator Fire/smoke simulator
Will allow, among others, exercises in conditions close to reality.
Organise Fire and smoke fighting session in flawed and realistic atmosphere. Total area M2 27 Total Area M2 31
Capacity 28 Capacity 12 Rate 1 day (VAT Excl.) 1300 Rate 1 day (VAT
Excl.) 1500 Rate ½ day (VAT Excl.) 800 Rate ½ day (VAT
Excl.) 950 Cabin / Cockpit ATR Simulator CORVETTE
A adapted and securised place to carry out exercises as emergency procedures, first aid, service.
This twin-engine business jet allows concrete First aid training in confined environment.
Total area M2 10 Interior surface M2 10 Capacity 16 Capacity 10 Rate 1 day (VAT Excl.) 900 Rate 1 day (VAT
Excl.) 900 Rate ½ day (VAT Excl.) 600 Rate ½ day (VAT
Excl.) 600 A340 Hangar
This authentic A340 Airbus is ideal for Cockpit and cabin practical training.
Will allow providing EASA Part-66 Licence training.
Total area M2 75 Total area M2 200 Capacity 40 Capacity 40 Rate 1 day (VAT Excl.) 900 Rate 1 day (VAT
Excl.) 900 Rate ½ day (VAT Excl.) 600 Rate ½ day (VAT
Excl.) 600 CONTACT [email protected] Phone: +33 (0)5 34 47 18 38 Do not hesitate to ask for our detailed brochure.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
71
Adm
inis
tratio
n
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
72
AIR FORMATION offers regulatory training courses to be attended online in both French and English language.
!
!Ob jecti ve s : + ++ + +Ge t +parti c ipant s + to +the+ le vel +o f +k nowle dge+require d+and+c ert ify + i t +wi th +a + tra i nin g+cer t if i cate+on +the+sam e+ter ms +as +wi th +a + face + to +face +on=s it e+ tra i ning . ++
Advant age s: +
A+ sel f =pac ed+tr aining+
solut i on.+
Eco nomical + and+ fl e xib l e, +i t +
i s + adapt ed +t o +f re e+
appl i can ts, +c orpor ate +
per sonne l +and+employ ees +
work ing +at +a +di st anc e+ fr o
m+
t hei r+ b ase. +
+
Consult the list of our training courses on our on-line shop http://air-formation.com Tabs “E-learning” “Order your trainings”
An E-learning training course is completed from a distant computer.
Contents of our E-learning training courses are similar to the contents of our on-site training courses (also called face-to-face courses).
Access to an E-learning training course is opened for a period ranging from 3 months to 1 year. It comprises an interactive content, and all its associated documentations that are available for download.
A technical and educational support is also provided all through the training period.
Our E-learning platform is accessible 24 hours a day, out of maintenance periods, until completion of the course and within the defined contractual period.
The technology used to develop our interactive E-learning contents allows trainees to attend them in sequences while remaining informed about their progress at each connection. All chapters reviewed and the scores obtained at the different intermediate tests are recorded. Time is added up at each connection.
At the end of the training course, a final test must be taken by the trainee: • The passing score is 75% minimum (several attempts are allowed). • In case of failure, an Instructor helps the trainee to find an adapted solution so as to reach the
expected level. • As a rule, we systematically check the trainees’ progress (100%) and the score obtained at the final
test (75%). Assiduity, seriousness and rigor are fundamental features for trainees to successfully complete their E-learning training course.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
73
TABLE OF CONTENT 1 Our instructional approaches 2 Our training courses and their respective durations 3 E-learning training 4 Blended training 5 Trainee’s commitment 6 Computer settings 7 Reminder on our different solutions 8 A few words from AIR FORMATION
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
74
1 Our instructional approaches
On-site trainings, allowing for enriching and friendly interactions with instructors.
E-learning trainings, providing flexibility with their 24 hour-a-day availability.
Blended trainings, offering an optimum combination of both solutions: E-learning and On-site.
On-site The trainee attends a training course that is delivered and
animated by an instructor within one of our classrooms inside our facilities.
E-learning The whole training course is completed by the trainee at a
distance, by means of an Internet connection to our E-learning platform.
Blended The trainee completes the first part of the training course at a
distance in E-learning.
The second part of the training is completed On-site.
All through your E-learning progress, our technical and educational support team can provide you (on request) with information about the status of your validation criteria and remind you of the required minima.
Bear in mind, however, that our technical and educational support team is by no way whatsoever a Hotline.
In case of a technical emergency, please contact us by e-mail at: [email protected] request shall be given a reply within a delay of 48 hours (week-ends excluded).
In case of an instructional emergency, please contact us by e-mail at: [email protected], your request shall be given a reply within a delay of 48 hours (week-ends excluded).
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
75
2 Our training courses and their respective durations
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
76
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
77
3 E-learning training 3.1 Key-steps of an E-learning training
Who? What? How?
You !
Order your E-learning training Pay for your E-learning training
From our website: www.air-formation.com Tab “E-learning”, then Tab “Order your trainings”. By E-mail at: [email protected] On-line, if ordered from our website. Upon invoice receipt, if ordered by E-mail.
Transmission of the training agreement and the General Terms and Conditions (if ordered by E-mail)
Sign the training agreement. Accept the General Terms and Conditions (if ordered by E-mail). Return both documents to Air Formation
By E-mail at: [email protected]
Access to the E-learning platform. Assignment of a login and password to each trainee for each training.
By E-mail specifying the login.
Start your E-learning training course When your training is completed, inform Air Formation about it (refer to the notes on the next page).
From our website: www.air-formation.com Tab “E-learning” By E-mail at: [email protected]
Issuance of an attendance sheet to be signed by the trainee or the training manager (date, stamp and surname).
Sign your attendance sheet and return it to Air Formation. By E-mail at: [email protected]
Issuance of an individual training certificate. Completion of the E-learning training session.
Transmission of the training certificate to the trainee.
Information needed for your enrollment: • Trainee’s surname, first name, E-mail address and phone number • SPECIFIC title of the selected training course • Surname and first name of the training agreement signatory • Billing address • Surname, E-mail and phone number of the interlocutor in charge of the
E- learning follow-up
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
78
Notes:
• Once the final test included in the E-learning training is successfully completed, the trainee can: - Validate his/her training to get the related attendance sheet, or - Go through the reviewed chapters again. Validation of the E-learning training course can then be
requested at any time. • AIR FORMATION shall not be held responsible for any delay caused in the administrative processing
of a training course if not informed in due time of its completion by the concerned trainee. • Once validation is granted by AIR FORMATION, access to the training course is closed and the trainee
can no longer log in.
3.2 Attendance sheet
Your signature commits YOURSELF to the actual attendance of this training course.*
1
Your company
Title of your Training course.*
Your Surname, first name and e-mail.*
Validation terms: • Your connection time is checked with
reference to the recommended or mandatory training time.
• Your progress must be equal to 100%. * • Your score at the final test must be superior
or equal to 75%.
* filled in by AIR FORMATION. * filled in by the trainee.
2
c
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
79
4 Blended training
4.1 General A Blended training combines:
• A distant computer-based training session, and • An on-site training session delivered by an instructor.
This approach makes the training optimum by reducing the time spent inside a classroom, without impairing the level of knowledge acquired. It is perfectly adapted to corporate personnel. Contents of the training courses are similar to the contents of our on-site training courses.
A Standard Blended training is deployed in two phases:
1/ The first part of the training course is performed in E-learning (Refer to Chapter 3: E.learning training).
At the end of the E-learning session of the Blended training:
• A final test must be taken by the trainee. The passing score is 75% minimum. • In case of failure, the trainee can review parts of his/her course so as to gain further knowledge before
taking the test again. • As a rule, we systematically check the trainee’s progress (100%) and the score obtained at the final
test (75%). • The results are reported to the trainer before the on-site training.
2/ The second part of the training is performed in Face to face.
At the end of the On-site session: • Assessment of the trainee’s knowledge. • In the event of an assessment made on MCQ format, the passing score is 75% minimum. In case of
failure, an instructor helps the trainee to find an adapted solution so as to reach the expected level.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
80
4.2 Key-steps of a Standard Blended training Who? What? How ?
You !
Browse our instructional schedule, and select your Blended training Order your Blended training
From our website: www.air-formation.com Tab “Blended”, then Tab “Browse the on-site instructional schedule” ». By E-mail at: service.admin@air-‐formation.com
Transmission of the Training agreement + Invoice and the General Terms and Conditions
As soon as the trainee confirms his/her availability for the session of his/her choice.
Sign the Training agreement. Accept the General Terms and Conditions Pay for the training. Return all documents to Air Formation
By E-mail at: [email protected]
Transmission of the settled invoice. Access to the E-learning platform. Assignment of a login and password to each trainee for each training.
By E-mail specifying the login, and the validation criterion associated to the training course: duration.
Start your E-learning training course. Go through the whole of it (100%). Take the tests until you get a minimum score of 75%
When your training is completed, inform Air Formation about it (refer to the notes on the next page).
From our website: www.air-formation.com Tab “E-learning”, then Tab “Access your trainings” By E-mail at: [email protected]
The instructor gets informed about your progress Once the E-learning part of your Blended training is validated by AIR FORMATION.
Sign your attendance sheet and return it to Air Formation. By E-mail at: [email protected]
Attendance of the On-site part of your Blended training.
The training notification and the attendance sheet must be returned signed to the instructor during the On-site part of the Blended training.
Completion of the Blended training session. Transmission of the training
certificate to the trainee.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
81
Information needed for your enrollment: • Trainee’s surname, first name, E-mail address and phone number • SPECIFIC title of the selected training course • Surname and first name of the training agreement signatory • Billing address • Surname, E-mail and phone number of the interlocutor in charge of the E-
learning follow-up
Notes:
• Once the final test, included in the E-learning session of the Blended training, is successfully completed, the trainee can: - Go through the reviewed chapters again.
• AIR FORMATION shall not be held responsible for any delay caused in the administrative processing of a training course if not informed in due time of its completion by the concerned trainee.
• Access to the content of the E-learning session of the Blended training on our E-learning platform is open until the date of the On-site session.
• At the end of the On-site session, access to the E-learning session is closed and the trainee can no longer log in.
• AIR FORMATION shall reserve the right to refuse the enrollment to its on-site training sessions of any trainees not demonstrating the required level.
4.3 Completion of a Blended training
Completion of the training is effective upon issuance of the training certificate, under the following terms:
• The E-learning session of the Blended training is validated with its respective attendance sheet, and the on-line test is successfully taken.
• The On-site session of the Blended training is validated with its respective training notification and attendance sheet, and the on-site knowledge assessment is successfully taken.
• All attendance-related documents are returned to AIR FORMATION, duly signed by the trainee.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
82
5 Trainee’s commitment
No training certificate shall be issued without the prior return of your attendance sheet, duly signed.
This document lists the key-criteria of your training.
It allows you to check for any mistakes in your personal (spelling mistakes, wrong e-mail) or connection (score, title of the training…) data.
You therein state that you personally attended the training.
In case of non-validation:
• An information e-mail is sent to the trainee, listing the criteria that remain to be met (connection time, score at the final test).
• The trainee is invited to connect again on the E-learning platform so as to fulfil all the above mentioned criteria. It is the trainee’s responsibility to inform AIR FORMATION of the end of his/her training when all criteria are met for validation.
• These training timeframes are implemented on the basis of objective criteria, notably the supervision and control practices of aviation Authorities.
• We highly encourage you to comply with these recommended timeframes to get a training certificate that shall be deemed acceptable by supervisory Authorities (EASA / FAA / TCCA / CAAC / DGAC / OSAC/...). As a matter of fact, our training certificates shall systematically stipulate the connection time actually recorded for each training.
• AIR FORMATION shall not be held responsible for the non-acceptance of a training certificate by the relevant Aviation Authorities because of an insufficient training time.
• At the end of your training, please send an information e-mail at: [email protected]. Without this information e-mail, AIR FORMATION shall not be held responsible for any delay caused in the administrative processing of your training records.
• In case of non-validation at the end of the training, a relevant solution will have to be implemented by both parties. In case of unresolved disagreement, the training shall not be validated.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
83
6 Computer settings
Trainees must be equipped with the minimum technical settings listed hereafter:
Windows Mac • Windows 7 or later version • Firefox 17 or later version or Google Chrome
• MacOS X 10.5 or later version • Chrome Browser
Tablet: OS Apple or Android • Adobe Flash Player 11 • RAM: 1Go • Graphic memory: 256 Mo • Display size: 1024X768 • Audio: available through loudspeakers or headsets
Any computer connected to some Intranet, screened by a firewall, must be authorized by the respective network administrator to communicate with our domain http://www.airformationelearning.com/.
Should these conditions be not met, AIR FORMATION shall not be held responsible for the validity and reliability of the training follow-up.
Furthermore, for technical reasons strictly related to the following browsers, AIR FORMATION shall not be held responsible for the reliability of the follow-up provided for any training completed through Internet Explorer on PC (acceptable options: Firefox and Chrome), or Safari on Mac (acceptable option: Chrome).
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
84
7 Reminder on our different solutions
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
85
8 A few words from Air Formation
Complemented by:
• Strong motivation. • Internet access to connect to AIR FORMATION E-learning platform, and efficiently communicate
with its instructional and support team. • Earnest commitment to the training progress. • Completion of the whole training and fulfilment of all validation criteria.
AIR FORMATION commitment:
• Provide follow-ups and make regular assessments with the customers’ training managers. • Implement updates of the trainings for their continuing compliance with the legislation in force. • Provide relevant answers to all trainees’ requests.
All the documents provided on our E-learning platform are the strict property of AIR FORMATION, and shall by no means whatsoever be disclosed to any third party. The protection implemented on all our interactive contents makes them unprintable.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
86
AIR FORMATION Internal Rules and Regulations
Adm
inis
tratio
n
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
87
Application
The present rules and regulations are applicable to all trainees. Every trainee shall accept the terms of the current contract when attending a training course at AIR FORMATION.
General conditions
Every individual participating to a training course shall comply with the present rules and regulations for any matters related to the application of hygiene and safety regulations, in addition to the general and permanent rules related to discipline.
General hygiene and safety rules
Every trainee shall ensure of his/her personal safety and that of the others while complying, according to the training course, with the general and particular safety and hygiene instructions in force at the training place.
However, in compliance with Article R.1321 from the French Labor Code, when a training course is delivered within a company or organization already ruled by its own internal regulations, in application of Section VI of Chapter II, Title II from the first Book of the present Code, the safety and hygiene rules of the latter shall prevail. Furthermore, every trainee dispatched to a company within the frame of a training course shall comply with the hygiene and safety rules applicable as per this company internal rules and regulations.
Keeping equipment in a good condition
It is the responsibility of every trainee to keep the equipment provided in the frame of his/her training course in a good condition. All trainees shall use the equipment provided in compliance with their object: any use of the equipment to other ends, notably personal ends, is strictly forbidden.
Ø According to the training course that is attended, trainees can be requested to dedicate the required time to equipment maintenance and cleaning.
Ø Use of machines and equipment. Tools and machines shall only be used under the supervision of an instructor. Any defect identified on machines or equipment, and any incident shall be immediately reported to the instructor in charge of the training course.
Fire instructions
Fire instructions notices, complemented by a plan for the location of fire-extinguishers and emergency exits, are displayed within AIR FORMATION premises so as to be clearly identified by all trainees.
Demonstrations and exercises are recurrently carried out to monitor the good condition of fire-fighting equipment, and supervise the prevention and evacuation instructions.
Accident
An accident or incident occurring within the frame of a training course shall be immediately reported by the injured trainee or any witnessing individuals to the Managing Board or, by default, the training Manager.
As per Article R 6342-1 from the French Labor Code, an accident occurring to a trainee within the training organization or during his/her normal journey to and back the training organization, shall be subject to a declaration by the training organization Executive Officer to the French Social Security Fund.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
88
Consumption of alcohol
Access to the training organization is strictly prohibited to any trainee under the influence of alcohol abuse. No alcoholic beverages are allowed on AIR FORMATION premises.
No smoking
As per Decree n°1386-2006 from November 16, 2006, setting up the conditions for application of the no-smoking rule in public areas, no smoking is allowed within AIR FORMATION premises. An outdoor space is dedicated for this purpose.
Training hours - Absences and late arrivals
The training timetables are set up by the Managing Board or the training Manager, and notified to the trainees both through billboards and on their training course programme. Should trainees not comply with their training course timetable, the following provisions would be applicable:
Ø In the event of an absence or late arrival, every trainee shall inform the instructor in charge of their training course about it, while providing appropriate justification. Furthermore, it is admitted that no trainee shall be allowed to leave the training course, unless otherwise agreed under exceptional circumstances specified by the Managing Board or training Manager.
Ø In the event of trainees involved in a training course included in the frame of a training plan, the training organization shall preliminarily inform the Employer about any absence. Any absence or delay unaccounted for by any particular circumstance shall be considered as a violation punishable by disciplinary measures.
Ø Furthermore, in the event of trainees with an unemployed status charged to the State or Region, any unjustified absence shall result in a wages holding proportionate to the duration of the said absence, as per application of Article R 6341-45/46/47 and 48 from the French Labor Code.
Ø Eventually, it is every trainee’s obligation to recurrently and gradually fill in and sign their attendance sheets all along their training action and, by the end of it, their training assessments and certificates.
Access to the Training Organization
Unless expressively authorized by the Managing Board or training Manager, every trainee entering the training organization to attend a training course shall not:
Ø Enter or remain in the premises to any other end whatsoever; Ø Facilitate the introduction of any third-party individuals, or any goods meant for purchase by the
personnel or trainees. Ø They must have an access badge with a QR code given throughout the duration of the training.
Behavior and personal appearance
It is every trainee’s responsibility to have an acceptable personal appearance and an appropriate behavior towards any individual present in the training organization. Assessment of the dress-code is left at the discretion of the Managing Board or training Manager.
Information and billboarding
Dissemination of information is performed by means of billboards planned to that end. Commercial advertising, political, trade-unionist and religious propaganda are strictly prohibited within the premises of the training organization.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
89
Responsibility of the training organization for any damage or theft to trainees’ personal properties
The training organization shall not be held responsible for any loss, theft or deterioration of vehicles to any personal belongings whatsoever left by trainees on its premises (classrooms, workshops, administration offices, parking areas, cloakrooms...).
Penalties
Any violation made by trainees to one of the recommendations of the present rules and regulations shall result in penalties.
As per Article R 6352-3 from the French Labor Code, a penalty includes any measures, other than oral observations, undertaken by the Managing Board or Training Manager, following a violation made by a trainee purposely, whether this measure has an immediate impact on the presence of the said trainee in the training course or not, or whether it questions the continuity of the attended training or not.
According to the severity of the violation, the penalty shall take the form of:
Ø An oral warning; Ø A written warning or call to order; Ø A definite dismissal for misconduct (as a reminder, specific provisions are included in training
agreements concluded between the organization and the State or Region, should the aforementioned penalties be applied).
Any collection of fines or financial penalties is strictly forbidden.
AIR FORMATION Executive Officer shall report any penalty implemented against trainees to:
Ø The employer, when the training course is included in a training plan set up by a company; Ø The employer and the joint agency in charge of the training fees, when the training course is
included in the scope of a training leave.
Disciplinary procedure
The provisions applicable by AIR FORMATION have been implemented in accordance with Articles R 6352-4 and R 6352-8 from the French Labor Code.
Entry into force
The current regulations are effective as from the date at which the training course starts.
Copies are distributed to the trainees and customers upon enrollment.
Laurent VALLIER
AIR FORMATION Executive Officer
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
90
General Terms and
Conditions of Sale
Adm
inis
tratio
n
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
91
General Terms and Conditions of sale for professionnals
Article 1: GENERAL PROVISIONS
1. Presentation The present General Terms and Conditions of Sale (CGV) shall apply between, on the one hand, AIR FORMATION, SARL with a capital of 16 500 Euros, headquarters located at 14 Avenue de l’Escadrille Normandie Niémen 31700 Blagnac (France) and registered under number 489 532 648 in the French Registre du Commerce et des Sociétés, (hereafter designated as « AIR FORMATION ») and, on the other hand, any natural or legal person willing to purchase a service in the frame of his/her professional activity, (hereafter designated as « the Customer »).
2. Scope of application The present General Terms and Conditions of Sale are applicable to all services proposed to all professional customers, natural or legal persons, acting within the frame of a training agreement concluded individually with AIR FORMATION and related to purchase orders issued by the Customers to AIR FORMATION. They set up the contractual conditions applicable to the provision of AIR FORMATION services to its customers. Any order issued implies the full and unrestricted agreement of the Customer to the present General Terms and Conditions of Sale. The CGV, in addition to all information mentioned on the website, are written in French.
3. Modification AIR FORMATION reserves the right to modify the present General Terms and Conditions at any time. The General Terms and Conditions of Sale applicable shall be, however, the ones in force upon issuance of the purchase order.
Article 2: CHARACTERISTICS OF THE SERVICES
The services proposed by AIR FORMATION are related to intellectual work dedicated to the delivery of aeronautical training courses.
1. On-site trainings AIR FORMATION site These training courses, proposed within AIR FORMATION catalog, are delivered within AIR FORMATION premises in accordance with a definite programme and schedule.
Customer’s site These training courses are developed according to the Customer’s needs and implemented either within the premises provided by the Customer or AIR FORMATION premises.
2. Distance trainings: e-learning trainings E-learning services are related to the distant provision of training courses via a virtual platform.
Upon receipt of the payment, AIR FORMATION mails a login and password to the Customer for access to the ordered training course. Access to the training course is open for a period of three (3) months, starting from the mailing of the login and password. These data are strictly personal and confidential; they shall not be disclosed, traded or shared with any third-party. They shall be placed under the responsibility of the Customer who shall be liable for any fraudulent or abusive use of the access codes.
AIR FORMATION is committed to provide an access to its virtual platform 24/7 all through the contractual period, unless in case of potential breakdown, maintenance or technical constraints related to the peculiarities of the Web network.
AIR FORMATION shall provide the Customer with a phone support service for any trouble that may be experienced.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
92
Article 3: PURCHASE ORDERS
The nature and characteristics of the service are defined in the purchase order. The expected service is detailed in a descriptive notice entitled « Training Programme », provided in annex to the training agreement concluded between the Customer and AIR FORMATION.
1. Definitive principle of the order Distant orders Any order issued to AIR FORMATION in any form whatsoever (phone, mail…) shall be deemed to be accepted by AIR FORMATION upon receipt of the purchase order holding the Customer’s signature.
On-line orders The on-line services available on the website shall remain valid as long as the said services are included in the catalog. To place an order, the Customer selects the relevant training course within the on-line catalog, and confirms his selection via a click on the « Add to basket » button. After controlling the correctness of the order and modifying it as needed, the Customer shall settle the payment as per the defined conditions. The Customer is committed to take notice of the CGV therein, available for consultation under item « Legal Notice » on AIR FORMATION website, www.air-formation.com. By confirming the order, the Customer accepts to be bound by the CGV, and concludes the contract.
Acknowledgement of receipt of the order and its corresponding payment is performed by means of an e-mail sent by AIR FORMATION to the Customer as soon as possible.
AIR FORMATION shall reserve the right to refuse an order for legitimate reasons, as per Article L122-1 from the French Consumer Code.
In compliance with Article L6353-5 from the French Labor Code, a professional Customer, acting as a natural person within the scope of a training agreement concluded on an individual basis, is provided with a refund period of ten (10) days starting from the contract signature. The Customer can request for the refund via a registered letter with acknowledgement of receipt.
2. Rescheduling - Cancellation AIR FORMATION shall reserve the right to reschedule or cancel a training service listed in its corporate schedule. In such circumstances, AIR FORMATION is committed to inform the Customer about this rescheduling as soon as possible and to refund the registration fees already settled. All other fees contracted by the Customer for the said training service shall not be subject to any refund by AIR FORMATION. The Customer is entitled to replace any declining candidate by a substitute candidate up to the day preceding the training service.
In the event of a cancellation initiated by the Customer, AIR FORMATION shall withhold the following amounts:
-‐ 20% of the full amount of the service initially contracted, in the event of a cancellation occurring less than 10 working days before the start date of the training service.
-‐ 100% of the full amount of the service initially contracted, in the event of a cancellation occurring less than 7 working days before the start date of the training service.
-‐ 100% of the full amount of the service initially contracted, in the event of a cancellation occurring on the start date of the training service.
As per Article L6353-7 from the French Labor Code, a professional Customer, acting as a natural person within the scope of a training agreement concluded on an individual basis, is entitled to terminate the contract in case of major force circumstances duly acknowledged.
Article 4: PRICE AND PAYMENT
1. Determination of prices AIR FORMATION-site trainings and e-learning trainings The prices of the training services mentioned in the purchase order are the ones listed within the yearly training catalog implemented by AIR FORMATION, on the day of the order placement. These prices are denominated in Euros, exclusive of VAT, and are firm prices from January 1st to December 31st of the current year. They shall be increased of the VAT rate in force.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
93
Customer-site trainings The prices of the trainings services are the subject of a fee grid structure agreed by both parties.
2. Discounts Unless otherwise stipulated within the particular conditions agreed on by both parties, no discount shall be granted.
3. Terms of Payment Payment directly made by the Customer:
• For AIR FORMATION-site trainings, on the due date stated on the invoice. • For Customer-site trainings, no later than the thirtieth day following the date stated on the invoice.
Should a time extension for the payment be granted by particular conditions agreed on by both parties, the latter would turn obsolete in the event of a late payment.
• For e-learning trainings, payment shall be made upon placement of the order. Payments shall only be made by credit card, cheque or bank transfer.
As per Article L6353-6 from the French Labor Code, upon expiry of the withdrawal period of ten (10) days, no more than 30% of the agreed price shall be required from a professional Customer, acting as a natural person within the scope of a training agreement concluded on an individual basis. Payment of the balance shall be made gradually all along the training action.
Payment made by a vocational training fund agency (OPCA, ADEFIM, AGEFOS, FONGECIF…): Should the payment be made by a financing agency, it would be the Customer’s responsibility to:
-‐ Initiate the request for the covering before the start-date of the training course, and to ensure of the request approval.
-‐ Explicitly stipulate it upon the order placement, and provide AIR FORMATION with a copy of the coverage approval.
-‐ Control the execution of the payment by the designated agency. In the event of a partial coverage of the training course by the selected agency, the balance would be charged to the Customer by AIR FORMATION.
Should the approval for the coverage be not provided to AIR FORMATION on the first day of the training course, all training fees would be charged to the Customer by AIR FORMATION.
4. Invoicing The invoice shall be issued in two copies upon receipt of the purchase order, with one copy provided to the Customer.
5. Late payment Any payment made later than the due date stated on the invoice shall automatically result in the application of a late payment penalty, without prior formal notice and equal to three times the legal interest rate.
This penalty shall be calculated on the amount that remains to be paid, inclusive of VAT (all taxes included). In addition to this penalty, the Customer shall have to settle a lump sum for recovery costs, equal to forty Euros (40 Euros), from the first day of the late payment, regardless of the rate applicable to the transaction. The lump sum shall be applied to any late payment invoice.
Article 5: EXECUTION OF THE CONTRACT
1. Execution of the training service The training service shall be executed on the date stated on the purchase order, with reference to the training courses schedule implemented by AIR FORMATION, upon reserve of any necessary modifications. In such circumstances, AIR FORMATION is committed to inform the Customer as soon as possible.
2. Conformity AIR FORMATION is committed to providing a service compliant with the contractual provisions, and is subject to an obligation of means for execution of the said provisions.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
94
Article 6: MAJOR FORCE
AIR FORMATION shall not be held responsible in the event of the non-performance or delayed performance of its obligations due to an event of major force or unforeseeable circumstances. Such events or unforeseeable circumstances shall notably include: sickness or accidental conditions affecting the instructor in charge of the training service, strikes and social disorders, natural disasters, fires and climatic conditions. This is a non-exhaustive list as events of major force are defined as per Article 1148 from the French Civil Code.
Article 7: LIABILITY
AIR FORMATION shall bear no liability in the event of the non-performance or defective performance of its obligations due to circumstances attributable either to the Customer or any third party to the current contract, or any event of major force.
AIR FORMATION shall only be liable to the damages affecting the Customer because of AIR FORMATION admitted misconduct.
Article 8: INTELLECTUAL PROPERTY
All services proposed by AIR FORMATION to its customers are the exclusive intellectual property of AIR FORMATION. All contents and supports used by AIR FORMATION within the execution of its services are the sole property of AIR FORMATION. Any use, copy, exploitation, in addition to any exchange, resale or rental is strictly prohibited, and shall be subject to legal prosecution as copyright infringement.
The designations: AIR FORMATION, CFM66, CCA are registered trademarks with the INPI (Institut National de la Propriété Industrielle – National Institute of Industrial Property) under the national information numbers: Air Formation: 12/3188942, CFM66: 09/3670962, CCA: 14/4072699.
Article 9: CONFIDENTIALITY
All contracting parties are committed not to disclose in any form whatsoever the information to which they have access during the execution of the contract, regardless of their nature, and related to the other party, without the latter prior consent.
Article 10: GOVERNING LAW AND JURISDICTION
These Terms and Conditions of sale shall be governed by the French Law. In the event of a dispute related to the interpretation or application of the Terms and Conditions herein, or execution of the contract concluded between AIR FORMATION and the Customer, a mutual agreement shall be sought. In case of unresolved dispute, the Tribunal de commerce of Toulouse shall be the sole competent Authority.
Article 11: DEFINITIONS
Legal person: Association granted with a legal personality by the Law, and which benefits from the same rights as natural persons.
Service: Generic term including all services proposed to the Customer by AIR FORMATION, namely actions related to Training, Audit and Consulting. Audit and Consulting actions require a preliminary contact with AIR FORMATION as their implementation are ruled by particular provisions to be defined by the contracting parties. For this reason, Articles 2, 3 and 4 above shall not be applicable.
Purchase order: Simplified written means amounting to an order.
OPCA: An OPCA is an agency approved by the Government to collect the funds related to professional trainings. It is in charge of the administrative and financial management of the training actions requested by the affiliated company. Several OPCA can be identified, each one with its own coverage criteria and respective procedures.
Jurisdiction Clause: Clause of a contract by which the contracting parties agree to submit to a jurisdiction they designate, any dispute that may arise all along the contract lifetime.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
95
General Terms and Conditions of sale for consumers and non- professionnals
Article 1: GENERAL PROVISIONS
1. Presentation The present General Terms and Conditions of Sale (CGV) shall apply between, on the one hand, AIR FORMATION, SARL with a capital of 16 500 Euros, headquarters located at 14 Avenue de l’Escadrille Normandie Niémen 31700 Blagnac (France) and registered under number 489 532 648 in the French Registre du Commerce et des Sociétés, (hereafter designated as « AIR FORMATION ») and, on the other hand, any natural or legal person willing to purchase a service out of the frame of his/her professional activity, (hereafter designated as « the Customer »).
2. Scope of application The present General Terms and Conditions of Sale are applicable to all services proposed by AIR FORMATION to all non-professional customers or consumers, and are related to purchase orders issued by the Customer to AIR FORMATION. They set up the contractual conditions applicable to the provision of AIR FORMATION services to its customers. Any order issued implies the full and unrestricted agreement of the Customer to the present General Terms and Conditions of Sale. The CGV, in addition to all information mentioned on the website, are written in French.
3. Contractual provisions The nullity of a contractual provision shall not result in the nullity of the general terms and conditions therein.
4. Modification AIR FORMATION reserves the right to modify the present General Terms and Conditions at any time. The General Terms and Conditions of Sale applicable shall be, however, the ones in force upon issuance of the purchase order.
Article 2: CHARACTERISTICS OF THE SERVICES
The services proposed by AIR FORMATION are related to intellectual work dedicated to the delivery of aeronautical training courses.
1. On-site trainings These training courses, proposed within AIR FORMATION catalog, are delivered within AIR FORMATION premises in accordance with a definite programme and schedule.
2. Distance trainings: e-learning trainings E-learning services are related to the distant provision of training courses via a virtual platform.
Upon receipt of the payment, AIR FORMATION mails a login and password to the Customer for access to the ordered training course. Access to the training course is open for a period of three (3) months, starting from the mailing of the login and password. These data are strictly personal and confidential; they shall not be disclosed, traded or shared with any third-party. They shall be placed under the responsibility of the Customer who shall be liable for any fraudulent or abusive use of the access codes.
AIR FORMATION is committed to provide an access to its virtual platform 24/7 all through the contractual period, unless in case of potential breakdown, maintenance or technical constraints related to the peculiarities of the Web network.
AIR FORMATION shall provide the Customer with a phone support service for any trouble that may be experienced.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
96
Article 3: PURCHASE ORDERS
The nature and characteristics of the service are defined in the purchase order. The expected service is detailed in a descriptive notice entitled « Training Programme », provided in annex to the training agreement concluded between the Customer and AIR FORMATION.
1. Definitive principle of the order Distant orders
Any order issued to AIR FORMATION in any form whatsoever (phone, mail…) shall be deemed to be accepted by AIR FORMATION upon receipt of the purchase order holding the Customer’s signature. To this end, any registration to a training course shall only be effective upon receipt of the purchase order.
On-line orders
The on-line services available on the website shall remain valid as long as the said services are included in the catalog.
To place an order, the Customer selects the relevant training course within the on-line catalog, and confirms his selection via a click on the « Add to basket » button. After controlling the correctness of the order and modifying it as needed, the Customer shall settle the payment as per the defined conditions. The Customer is committed to take notice of the CGV therein, available for consultation under item « Legal Notice » on AIR FORMATION website, www.air-formation.com. By confirming the order, the Customer accepts to be bound by the CGV, and concludes the contract.
Acknowledgement of receipt of the order and its corresponding payment is performed by means of an e-mail sent by AIR FORMATION to the Customer as soon as possible.
AIR FORMATION shall reserve the right to refuse an order for legitimate reasons, as per Article L122-1 from the French Consumer Code.
In compliance with Article L121-20 from the French Consumer Code, the Customer is provided with a refund period of fourteen (14) days starting from the offer acceptance, namely upon receipt by AIR FORMATION of the purchase order holding the Customer’s signature.
2. Cancellation In the event of a refund request initiated by the Customer, AIR FORMATION shall refund the training fees, at the latest, within the fourteen days following the request date, as per Article L121-21-8 from the French Consumer Code.
In the event of a cancellation initiated by the Customer less than 3 days before the start date of the training service, AIR FORMATION shall withhold all fees contracted for the execution of the said service. A training started by a trainee cannot be refunded.
In the event of a cancellation initiated by AIR FORMATION, AIR FORMATION is committed to inform the Customer about this cancellation as soon as possible and to refund the registration fees already settled. All other fees contracted by the Customer for the said training service shall not be subject to any refund by AIR FORMATION.
Article 4: PRICE AND PAYMENT
1. Determination of prices The prices of the training services mentioned in the purchase order are the ones listed within the yearly training catalog implemented by AIR FORMATION, on the day of the order placement. These prices are denominated in Euros, exclusive of VAT, and are firm prices from January 1st to December 31st of the current year.
2 Discounts Unless otherwise stipulated within the particular conditions agreed on by both parties, no discount shall be granted.
3 Terms of Payment Payment shall be made upon order placement, by credit card or cheque.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
97
4 Invoicing The invoice shall be issued in two copies upon receipt of the purchase order, with one copy provided to the Customer.
Article 5: EXECUTION OF THE CONTRACT
1. Execution of the training service The training service shall be executed on the date stated on the purchase order, with reference to the training courses schedule implemented by AIR FORMATION, upon reserve of any necessary modifications. In such circumstances, AIR FORMATION is committed to inform the Customer as soon as possible.
2. Conformity AIR FORMATION is committed to providing a service compliant with the contractual provisions, and is subject to an obligation of means for execution of the said provisions.
AIR FORMATION shall be held responsible for any non-conformity of the service as per the conditions of ordinary law.
Article 6: ARCHIVING
As per Article L134-2 from the French Consumer Code, AIR FORMATION shall record a copy of the contract on a reliable and sustainable support.
Article 7: MAJOR FORCE
AIR FORMATION shall not be held responsible in the event of the non-performance or delayed performance of its obligations due to an event of major force or unforeseeable circumstances. Such events or unforeseeable circumstances shall notably include: sickness or accidental conditions affecting the instructor in charge of the training service, strikes and social disorders, natural disasters, fires and climatic conditions. This is a non-exhaustive list as events of major force are defined as per Article 1148 from the French Civil Code.
Article 8: LIABILITY
AIR FORMATION shall bear no liability in the event of the non-performance or defective performance of its obligations due to circumstances attributable either to the Customer or any third party to the current contract, or any event of major force.
AIR FORMATION shall only be liable to the damages affecting the Customer because of AIR FORMATION admitted misconduct. AIR FORMATION shall only be liable to an obligation of means.
Article 9: CONFIDENTIALITY
All contracting parties are committed not to disclose in any form whatsoever the information to which they have access during the execution of the contract, regardless of their nature, and related to the other party, without the latter prior consent.
Article 10: PERSONAL INFORMATION
All information related to names and personal identities, collected by AIR FORMATION upon placement of an order by the Customer, is required for the order processing and the management of commercial relationship between the Customer and AIR FORMATION. The Customer shall be provided with a right of access, modification or opposition to this personal information, in compliance with the French legislation on Data Protection from January 6, 1978. This right of access can be fulfilled via the address specified in Article 1.1. This automatic processing of information has been subjected to a CNIL statement (number 1679507).
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
98
Article 11: INTELLECTUAL PROPERTY
All services proposed by AIR FORMATION to its customers are the exclusive intellectual property of AIR FORMATION. All contents and supports used by AIR FORMATION within the execution of its services are the sole property of AIR FORMATION. Any use, copy, exploitation, in addition to any exchange, resale or rental is strictly prohibited, and shall be subject to legal prosecution as copyright infringement.
The designations: AIR FORMATION, CFM66, CCA are registered trademarks with the INPI (Institut National de la Propriété Industrielle – National Institute of Industrial Property) under the national information numbers: Air Formation: 12/3188942, CFM66: 09/3670962, CCA: 14/4072699.
Article 12: GOVERNING LAW AND JURISDICTION
These Terms and Conditions of sale shall be governed by the French Law, excepted for the conflict-of-law rules. In the event of a dispute related to the interpretation or application of the Terms and Conditions therein, or execution of the contract concluded between AIR FORMATION and the Customer, selection of the competent Court shall be left at the discretion of the requester, when acting as a professional or consumer, namely the defendant’s place of residence or the place of execution of the service as per application of Articles 42 and 46 from the French Code of Civil Procedure, or at the discretion of the requester, as a consumer exclusively, namely his place of residence at the time of the contract signature.
Article 13: DEFINITIONS
Legal person: Association granted with a legal personality by the Law, and which benefits from the same rights as natural persons.
Service: Generic term including all services proposed to the Customer by AIR FORMATION, namely actions related to Training, Audit and Consulting. Audit and Consulting actions require a preliminary contact with AIR FORMATION as their implementation are ruled by particular provisions to be defined by the contracting parties. For this reason, Articles 2, 3 and 4.1 above shall not be applicable.
Purchase order: Simplified written means amounting to an order.
Jurisdiction Clause: Clause of a contract by which the contracting parties agree to submit to a jurisdiction they designate, any dispute that may arise all along the contract lifetime.
Registered under N° 73.31.04676.31 by the Préfet de la Haute-Garonne � APE Code: 8559A SIRET N°489 532 648 00040 � URSSAF N°: 737104453965 � EASA Approval FR.147.0037 Intracommunity VAT N°: FR 11489532648 � [email protected] � www.air-formation.com
99
Centre de Formation Aéronautique agréé EASA FR.147.0037
14 avenue Escadrille Normandie Niemen
31700 BLAGNAC - FRANCE
Phone +33(0)5 34 47 18 38 - [email protected] - www.air-formation.com
Maintenance Training Organization approved as per EASA FR.147.0037