catalogue no. dof/15 · 2020. 2. 28. · in both iec 60694 (expulsion fuses) and iec 60282 (powder...
TRANSCRIPT
Manufacturers of High Voltage Disconnectors & Switches
Morris Line Engineering
Brackla Industrial Estate, Bridgend. CF31 2AG. United Kingdom.T +44 (0) 1656 650680 F +44 (0) 1656 768209www.morrisline.co.uk
DOEF & DOPFDROP-OUT FUSE SWITCHESUP TO 36kVSwitch OverviewThe type DOEF fuse switch uses a rewirable dropout expulsion fuse. The type DOPF fused switch uses a cartridge based current limiting fuse.
This range of equipment provides reliable and cost-effective protection of distribution lines and transformers, while also offering a visual indicator as to the status of operation and disconnection from supply.
Each single pole fuse switch unit can be operated from the ground using an optional multi-section, portable fibreglass operating pole. Available in 1.2m sections, the poles are available to suit a wide range of applications (full details available in catalogue OP/15).
Catalogue No. DOF/15
Manufacturers of High Voltage Disconnectors & Switches
Morris Line Engineering
Brackla Industrial Estate, Bridgend. CF31 2AG. United Kingdom.T +44 (0) 1656 650680 F +44 (0) 1656 768209www.morrisline.co.uk
DOEF & DOPF DROP-OUT FUSE SWITCHESUP TO 36kV
THE MLE RANGE: With expulsion fuseholders for button head • pattern links manufacturers of high voltage disconnectors & switches
With non-fusible tubular links in place of • fuseholders
With current limiting fuse links (for backup • protection)
Mount only to accommodate Cooper • Bussmann or Brush sectionalisers
INSULATORSOur disconnectors and switches are available with porcelain or composite insulators. M.L.E. standard insulators for a given service voltage generally have higher electrical values than those contained in both IEC 60694 (expulsion fuses) and IEC 60282 (powder fuses), based on practice in most European and several other countries.
ORDERING INFORMATIONPlease provide the maximum possible information at the time of placing your order. In particular we need to know the service voltage, insulation level, interrupting capacity, fuse link rating, and insulator creepage distance required.
Receipt of this information with the order will save time-consuming correspondence and avoid unnecessary delays in submitting drawings for approval.
SPECIAL REQUIREMENTSWe are always ready to consider any special requirements regarding the specifications or arrangement of our equipment.
Catalogue No. DOF/15
RatingsService Voltage
Fuse Interrupting Capacity
Fuse Link Ratings
12kV 8kA 1-100A
24kV 8kA 1-100A
36kV 8kA 1-100A
RatingsService Voltage
Fuse Interrupting Capacity
Fuse Link Ratings
Transformer Rating
12kV 40kA 5-100A 1000kVA
24kV 25kA 5-40A 1000kVA
36kV 16kA 5-31.5A 1000kVA
Manufacturers of High Voltage Disconnectors & Switches
Morris Line Engineering
Brackla Industrial Estate, Bridgend. CF31 2AG. United Kingdom.T +44 (0) 1656 650680 F +44 (0) 1656 768209www.morrisline.co.uk
DOEF & DOPF DROP-OUT FUSE SWITCHESUP TO 36kV
AVAILABILITYMorris Line Engineering has established a global distribution network which operates in over 25 countries. Agents and trading partners represent the Company across Europe, the Middle East, the Far East and Africa.
Catalogue No. DOF/15
TYPICAL OUTLINE AND MOUNTING ARRANGEMENT FOR ANGLE BRACKET PATTERN TYPE DOEF FUSE-SWITCH (AVAILABLE UP TO 24KV)
Manufacturers of High Voltage Disconnectors & Switches
Morris Line Engineering
Brackla Industrial Estate, Bridgend. CF31 2AG. United Kingdom.T +44 (0) 1656 650680 F +44 (0) 1656 768209www.morrisline.co.uk
DOEF & DOPF DROP-OUT FUSE SWITCHESUP TO 36kV
Morris Line Engineering reserves the right to amend specifications and designs without notice. All information contained in this catalogue is for guidance only.
Catalogue No. DOF/15
TYPICAL OUTLINE AND MOUNTING ARRANGEMENTFOR CHANNEL BASE PATTERN TYPE DOEF FUSE-SWITCH
Product Technical Specification DOEF DOPF
Rated Voltage Up to 36kV Up to 36kV
Rated Continuous Current Up to 100A Up to 100A
Frequency 50/60Hz 50/60Hz
Interrupting Capacity Up to 8kA Up to 40kA