catalogue helideck and heliport lighting · helideck lights - hazardous area hb - helideck beacon...
TRANSCRIPT
rev_
03-0
9/ 2
019
CATALOGUE HELIDECK AND HELIPORT LIGHTING
Combustion and Energy S.r.l. - Via per Dolzago, 21 - 23848 Oggiono (Lecco) - ItalyLXS and LUXSOLAR are trademarks.
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926
Luxsolar and LXS are registered trademarks of C&E Group S.r.l., a company that since 1988 produces special equipment for the Oil&Gas Industry. Working in this sector, we realized that there was an increasing need of reliable lighting systems, suitable for dangerous and potentially explosive atmospheres.
In 2005, to satisfy the specific demand of LED Aircraft Warning Lights, C&E Group S.r.l. created Luxsolar brand.
Today, after a decade marked by a stable and growing global market presence, Luxsolar has become the first manufacturer of Aircraft Warning Lights that, using LED technology, can offer a complete range from low intensity LIOL (10cd) to high intensity HIOL (200.000cd – 360°).
Design and Quality are important to Luxsolar, as well as the possibility to rely on a network of certified American and European suppliers. All the products are designed and manufactured at the company headquarter in Oggiono, Italy.
Luxsolar and LXS products are submitted to a constant improvement process, thanks to an intense R&D activity conducted both independently and in collaboration with major Universities and Research Centres.
Thanks to its ability to offer individual solutions for customers and to produce lighting systems compliant to local and international regulations, Luxsolar processes purchase orders from around the world.
Luxsolar mission is to create more and more sustainable products, thanks to a constant innovation in the field of light signalling devices.
At Luxsolar, everything is made for passion.
#madeforpassion
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 3
HELIPORT AND HELIDECK LIGHTS
INDEX
HELIPORT LIGHTS - SAFE AREA
HB - Heliport Beacon
Perimeter light TLOF
Perimeter light LXS-ONE TLOF
Perimeter light LXS-ONE TLOF INSET
Perimeter light FATO
Aiming point light inset
Flight Path Alignment Guidance Light Inset
Approach light - Flashing light
Approach light - Steady Burning light
Heliport Floodlight
Helihoist Status light
Windsock Mast
HELIDECK LIGHTS - HAZARDOUS AREA
HB - Helideck Beacon
Perimeter light TLOF Ex
Helideck Status Wave off light
Repeater Light Ex
Helideck Floodlight
Windsock Ex - Zona 1
Windsock Ex - Zona 2
Product Line for Surface Heliport
Product Line fot Elevated Heliport
Product Line for Helideck
08
10
12
14
16
18
20
22
24
26
28
30
34
36
38
40
42
44
46
04
05
07
H 27H
FATO
TLOF
HB - HELIPORT BEACON - HB-LXS
APPROACH LIGHT Steady Burning - HAL-LXS-SB
APPROACH LIGHT Flashing Lights - HAL-LXS-FL
AIMING POINT LIGHT - APL-LXS-ONE-INSET
HELIPORT FLOODLIGHT - HFL-LXS-10K
PERIMETER LIGHT FATO - PHL-LXS-FATO
PERIMETER LIGHT TLOF - PHL-LXS-TLOF or TLOF-LXS-INSET
FLIGHT PATH ALIGNMENT GUIDANCE LIGHITING - FPAG-LXS-ONE-INSET
WINDSOCK
PERIMETER LIGHT TLOF (night)PHL-LXS-TLOF
PERIMETER LIGHT TLOF (night)TLOF-LXS-INSET
PERIMETER LIGHT FATO (night)PHL-LXS-FATO
AIMING POINT (night)APL-LXS-INSET
APPROACH LIGHT - SB (day/night)HAL-LXS-SB
APPROACH LIGHT - FL (day/night)HAL-LXS-FL
HB - HELIPORT BEACON (night)HB-LXS
WINDSOCKHLW-LXS
HELIPORT FLOODLIGHT (night)HFL-LXS-10K
LEGEND
FLIGHT PATH ALIGNMENT GUIDANCE LIGHITING (day/night)
FPAG-LXS-INSET
WINDSOCK - HLW-LXS
OBSTRUCTION LIGHT*
LUXSOLAR and LXS are trademarks
HELIPORT AND HELIDECK LIGHTS
PRODUCT LINE TYPICAL INSTALLATION SURFACE LEVEL HELIPORT (Land)
Heliport: An aerodrome or a defined area on a structure intended to be used wholly or in part for the arrival, departure and surface movement of helicopters. (ICAO Aerodromes Annex 14 - Volume II Heliports - International Standards and Recommended Practices - Chapter 1.1-Definitions)
*OBSTRUCTION LIGHT: Luxsolar has a complete product range for obstruction light. Download Obstruction light catalogue at www.luxsolar.com
4
Image is for informational purposes only.
ICAO configuration
HB - HELIPORT BEACON - HB-LXS
HELIPORT FLOODLIGHT - HFL-LXS-10K
PERIMETER LIGHT TLOF - PHL-LXS-TLOF or TLOF-LXS-INSET
WINDSOCK MAST - HLW-LXS
HB - HELIPORT BEACON (day/night)HB-LXS
LEGEND
TLOF
HELIPORT FLOODLIGHT (night)HFL-LXS-10K
WINDSOCKHLW-LXS
H
PERIMETER LIGHT TLOF (night)PHL-LXS-TLOF
PERIMETER LIGHT TLOF (night)TLOF-LXS-INSET
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made.
HELIPORT AND HELIDECK LIGHTS
PRODUCT LINE TYPICAL INSTALLATION ELEVATED HELIPORT (Skyscrapers, Buildings)
Elevated Heliport: heliport located on a raised structure on land. (ICAO Aerodromes Annex 14 - Volume II Heliports - International Standards and Recommended Practices - Chapter 1.1-Definitions)
5
Image is for informational purposes only.
HELIPORT AND HELIDECK LIGHT
HB - HELIDECK BEACON - HB-LXS-Ex-8
HELIDECK FLOODLIGHT - HFL-LXS-SS316LEx
PERIMETER LIGHT Ex TLOF - SST-LXS-Ex-TLOF
HELIDECK STATUS WAVE OFF - WOL-LXS-CAP437-Ex
REPEATER LIGHT Ex - REP-LXS-CAP437-Ex
WINDSOCK Ex - HDW-LXS-Ex
LEGEND
REPEATER LIGHT Ex* (day/night)REP-LXS-CAP437-Ex
HELIDECK STATUS WAVE OFF* (day/night)WOL-LXS-CAP437-Ex
TLOF
H
HB - HELIDECK BEACON (day/night)HB-LXS-Ex-8
WINDSOCKHDW-LXS-Ex
PERIMETER LIGHT Ex TLOF (night)SST-LXS-Ex-TLOF
HELIDECK FLOODLIGHT (night)HFL-LXS-SS316LEx
* REPEATER LIGHT Ex and HELIDECK STATUS WAVE OFF LIGHT are compliant with CAP437
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made.
Helideck: a heliport located on a fixed or floating offshore facility such as an exploration and/or production unit used for the exploitation of Oil or Gas. (ICAO Aerodromes Annex 14 - Volume II Heliports - International Standards and Recommended Practices - Chapter 1.1-Definitions)
These lights have been designed for hazardous areas with Ex d IIC and Ex tb protection and are Body ATEX and IECEx certified.
PRODUCT LINE TYPICAL INSTALLATION HELIDECK (Oil&Gas offshore)
HELIPORT AND HELIDECK LIGHTS
7
Image is for informational purposes only.
Certified
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 8
HELIPORT LIGHTSHELIPORT LIGHTSHB - HELIPORT BEACON
HB-LXS
FEATURES
Patented Beacon: Italy 280411.
EASY INSTALL
BASE DOME BEACON
GLASS
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
ICAO
COMPLIANCE
ENAC
CERTIFICATIONS
45
tested at 240km/h(150mph)
ICAOapproval
⇢ Long life time >10 years life expectancy
⇢ Morse code “H” White light⇢ Low consumption
⇢ Stabilised light output
⇢ Lightweight and compact⇢ Low wind load factor
⇢ Alarm/remote status control⇢ Easy to install
⇢ No RF-radiations
⇢ Light output alignment device⇢ Adjustable intensity OFF -3%, -10%, -100% through external digital switch
Power connector PLUG&PLAY: IP68/69k
Anodised aluminium body
Based on LED technology
Anti-condensation Gore-Tex valve
Chimney effect for optimum cooling of the beacon
Spirit level
Air-cooling system for +65% heat dissipation
Borosilicate glass cover protection
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 9
HELIPORT LIGHTSHELIPORT LIGHTSHB - HELIPORT BEACON
TECHNICAL SPECIFICATIONS AND DRAWINGS
• Anodised aluminium body with heat-sink for natural draft air cooling
• RAL7035 painted aluminium body lamp• Bottom wind collector for central heat-sink
cooling• Borosilicate glass cover protection• Silicone gasket• Degree of protection IP65 (Junction Box)• Degree of protection IP66 (Beacon)• Operating temperature -20°C to +45°C• Storage temp. range -45°C to +55°C• Lamp unit weight: 6kg approx
• CE marking• ICAO
MECHANICAL FEATURES
CERTIFICATIONS
• Average power consumption 13W• Power supply 230VAC - 50/60 Hz
ELECTRICAL FEATURES
• Anti bird protection• Power supply 24V
OPTIONS
• ICAO, Annex 14, Vol. II - Heliports - par. 5.3• ENAC: Regulation “Costruzione ed esercizio
degli eliporti” Vol. II - Heliports, ed. I - par. 3.2• ICAO Heliport Manual, ed. III - par. 5.2.3.2
COMPLIANCE
PART NUMBER
FRONT VIEW TOP VIEW216
218
FRONT VIEW SIDE VIEW
IS305015
300
500
200345
460
Phone: +39-0341-260926
LUXSOLAR E-Mail: [email protected]: +39-0341-577747
Web: www.luxsolar.com
Freq (Hz):
Power (VA):
Volt (V):
Sn°:
Year :
Job N°:
AWL CONTROL PANEL
LXS
• Horizontal beam radiation 360°• PMMA lens• Borosilicate glass protection•
Elevation (E)
10°
7°
4°
2° ½ 2500cd
1700cd
750cd
250cd
2500cd
1700cd
1° ½
0°
-180° Azimuth +180°
OPTICAL FEATURES
Luminous Intensity
Drawings and photos are for informational purposes only and can change without notice.
HB-LXS-IP24 HB-LXS-IP230
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 10
HELIPORT LIGHTSHELIPORT LIGHTS
Patented Beacon: Italy 1402606; Germany 20 2011 107 787.3; France 1160162.
tested at 240km/h(150mph) EASY INSTALL
BASE DOME
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
ICAO
COMPLIANCE
ENAC
CERTIFICATIONS
5020
ICAOapproval
PERIMETER LIGHT - TLOFPHL-LXS-TLOF
FEATURES
⇢ Steady burning GREEN light⇢ Long life time >10 years life expectancy
⇢ Low consumption
⇢ Stabilised light output
⇢ Lightweight and compact⇢ Low wind load factor
⇢ Easy to install
⇢ No RF-radiations
Policarbonate UV resistant dome
Anti-condensation Gore-Tex valveThread
¾" F NPT
Anodised aluminium body with heat-sink pins
Based on LED technology
Polyurethane foam
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 11
HELIPORT LIGHTSHELIPORT LIGHTSPERIMETER LIGHT - TLOF
TECHNICAL SPECIFICATIONS AND DRAWINGS
• Anodised aluminium body with heat-sink pins on the bottom
• Policarbonate UV Resistant Dome• Anti-condensation Gore-Tex valve• Degree of protection IP66• Operating temperature: -20°C to +50°C• Storage temperature: -25°C to +55°C• Lamp unit weight: 1kg approx• Frangible (breakaway) support
• CE Marking• ICAO
• ENAC Regulation: “Costruzione ed esercizio degli eliporti”, Ed. I - par. 3.8
• ICAO, Annex 14, Vol. II - Heliports• ICAO Heliport Manual, ed. III - par. 5.2.3.8
MECHANICAL FEATURES
CERTIFICATIONS
COMPLIANCE
PART NUMBER
• Power Supply 24VDC • Power consumption: 4W• LED feeded at costant current
ELECTRICAL FEATURES
• AC power supply 110-230VAC from control panel only
• IR emission• Additional Juntion Box for interconnection
OPTIONS
• Horizontal beam radiation 360°• Optical reflector •
OPTICAL FEATURES
Elevation (E)
20° < E ≤ 90° 3 cd
8 cd
15 cd
30 cd
15 cd
13° < E ≤ 20°
10° < E ≤ 13°
5° < E ≤ 10°
2° ≤ E ≤ 5°
-180° Azimuth +180°
Luminous Intensity
Drawings and photos are for informational purposes only and can change without notice.
PHL-LXS-TLOF PHL-LXS-TLOF-IR
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 12
HELIPORT LIGHTSHELIPORT LIGHTS
EASY INSTALL
BASE DOME
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
ICAO
COMPLIANCECERTIFICATIONS
6020
ICAOapproval
ENAC
PERIMETER LIGHT TLOF INSET TLOF-LXS-INSET
FEATURES
⇢ Steady burning GREEN light⇢ Long life time >10 years life expectancy
⇢ Low consumption
⇢ Stabilised light output
⇢ Easy to install
⇢ No RF-radiations
⇢ Low surface projection 11mm max
Based on LED technology
Anodised aluminium shallow base 5”
Glass cover protection
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 13
HELIPORT LIGHTSHELIPORT LIGHTS
PART NUMBER
TLOF-LXS-INSET
PERIMETER LIGHT TLOF INSETTECHNICAL SPECIFICATIONS AND DRAWINGS
• Horizontal beam radiation 360°• PMMA and glass lens •
• Anodised aluminium body • Silicone gasket• Degree of protection IP66• Shallow base dimension: 5”• Operating temperature: -20°C to +60°C• Storage temperature: -25°C to +85°C• Lamp unit weight: 2,3kg (without shallow base)
• CE Marking ICAO
• ENAC Regulation: “Costruzione ed esercizio degli eliporti”, Ed. I - par. 3.8
• ICAO, Annex 14, Vol. II - Heliports - par. 5.3.9• ICAO Heliport Manual, ed. III - par. 5.2.3.8
MECHANICAL FEATURES
CERTIFICATIONS
COMPLIANCE
OPTICAL FEATURES
• Power Supply: 12/24/48 DC• Power consumption: 2,8W• LED feeded at costant current
ELECTRICAL FEATURES
• If the products are used with an 8”- and/or 12”- diameter shallow bases, the adapter flange can be supplied by LUXSOLAR
• Power supply 110/230 VAC from control panel only
• Additional JB for interconnection
OPTIONS
Elevation (E) Luminous Intensity
20° < E ≤ 90° 3 cd
8 cd
15 cd
30 cd
15 cd
13° < E ≤ 20°
10° < E ≤ 13°
5° < E ≤ 10°
2° ≤ E ≤ 5°
-180° Azimuth +180°
Drawings and photos are for informational purposes only and can change without notice.
SIDE VIEW
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 14
HELIPORT LIGHTSHELIPORT LIGHTS
EASY INSTALL
BASE DOME
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
ICAO
COMPLIANCECERTIFICATIONS
6020
ICAOapproval
ENAC
PERIMETER LIGHT FATO INSET FATO-LXS-INSET
FEATURES
⇢ Steady burning WHITE light⇢ Long life time >10 years life expectancy
⇢ Low consumption
⇢ Stabilised light output
⇢ Easy to install
⇢ No RF-radiations
⇢ Low surface projection 11mm max
Based on LED technology
Anodised aluminium shallow base 5”
Glass cover protection
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 15
HELIPORT LIGHTSHELIPORT LIGHTS
PART NUMBER
FATO-LXS-INSET
PERIMETER LIGHT FATO INSETTECHNICAL SPECIFICATIONS AND DRAWINGS
• Anodised aluminium body • Silicone gasket• Degree of protection IP66• Shallow base dimension: 5”• Operating temperature: -20°C to +60°C• Storage temperature: -25°C to +85°C• Lamp unit weight: 2,3kg (without shallow base)
• CE Marking
• ENAC Regulation: “Costruzione ed esercizio degli eliporti”, Ed. I - par. 3.8
• ICAO, Annex 14, Vol. II - Heliports - par. 5.3.9• ICAO Heliport Manual, ed. III - par. 5.2.3.8
MECHANICAL FEATURES
CERTIFICATIONS
COMPLIANCE
Drawings and photos are for informational purposes only and can change without notice.
SIDE VIEW
• Power Supply: 12/24/48 DC• Power consumption: 5W• LED feeded at costant current
ELECTRICAL FEATURES
• Horizontal beam radiation 360°• PMMA and glass lens •
OPTICAL FEATURES
Elevation Luminous Intensity
30° 10 cd
50 cd
100 cd
100 cd
10 cd
25°
20°
10°
3°
0°
-180° Azimuth +180°
• If the products are used with an 8”- and/or 12”- diameter shallow bases, the adapter flange can be supplied by LUXSOLAR
• Power supply 110/230 VAC from control panel only
• Additional JB for interconnection
OPTIONS
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 16
HELIPORT LIGHTSHELIPORT LIGHTS
EASY INSTALL
BASE DOME
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
ICAO
COMPLIANCECERTIFICATIONS
5020
ICAOapproval
ENAC
Patented Beacon: Italy 1402606; Germany 20 2011 107 787.3; France 1160162.
PERIMETER LIGHT - FATOPHL-LXS-FATO
FEATURES
⇢ Steady burning WHITE light⇢ Long life time >10 years life expectancy
⇢ Low consumption
⇢ Stabilised light output
⇢ Lightweight and compact⇢ Low wind load factor
⇢ Easy to install
⇢ No RF-radiations
Policarbonate UV resistant dome
Anti-condensation Gore-Tex valveThread
¾" F NPT
Anodised aluminium body with heat-sink pins
Based on LED technology
Polyurethane foam
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 17
HELIPORT LIGHTSHELIPORT LIGHTSPERIMETER LIGHT - FATO
TECHNICAL SPECIFICATIONS AND DRAWINGS
• Anodised aluminium body with heat-sink pins on the bottom
• Policarbonate UV Resistant Dome• Silicone gasket• Degree of protection IP66• Anti-condensation Gore-Tex valve• Operating temperature: -20°C to +50°C• Storage temperature: -25°C to +55°C• Lamp unit weight: 1kg approx• Frangible (breakaway) support
• CE Marking
• ENAC Regulation: “Costruzione ed esercizio degli eliporti”, Section I
• ICAO, Annex 14, Vol. II - Heliports - par. 5.3.7• ICAO, Heliport Manual, Ed. III - par. 5.2.3.8
MECHANICAL FEATURES
CERTIFICATIONS
COMPLIANCE
PART NUMBER
• Power Supply 12-24VDC • Power consumption: 4W• LED feeded at costant current
ELECTRICAL FEATURES
• AC power supply 110-230VAC from control panel only
• IR emission• Additional Juntion Box for interconnection
OPTIONS
Drawings and photos are for informational purposes only and can change without notice.
PHL-LXS-FATOPHL-LXS-FATO-IR
• Horizontal beam radiation 360°• Optical reflector •
OPTICAL FEATURES
Elevation Luminous Intensity
30° 10 cd
50 cd
100 cd
100 cd
10 cd
25°
20°
10°
3°
0°
-180° Azimuth +180°
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 18
HELIPORT LIGHTSHELIPORT LIGHTS
EASY INSTALL
BASE DOME
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
ICAO
COMPLIANCECERTIFICATIONS
6020
Patented Beacon: EU 02811174/0001-0006; Australia 201611680; Canada 167812; USA 29/560,345.
AIMING POINT LIGHT INSETAPL-LXS-INSET
FEATURES
⇢ Steady burning WHITE light⇢ Long life time >10 years life expectancy
⇢ Low consumption
⇢ Stabilised light output
⇢ Easy to install
⇢ No RF-radiations
⇢ Low surface projection 11mm max
Based on LED technology
Anodised aluminium shallow base 5”
Glass cover protection
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 19
HELIPORT LIGHTSHELIPORT LIGHTS
PART NUMBER
APL-LXS-INSET
AIMING POINT LIGHT INSETTECHNICAL SPECIFICATIONS AND DRAWINGS
• Anodised aluminium body • Silicone gasket• Degree of protection IP66• Operating temperature: -20°C to +60°C• Storage temperature: -25°C to +85°C• Lamp unit weight: 2,3kg
• CE Marking
• ICAO, Annex 14, Vol. II - Heliports - par. 5.3.8• ICAO Heliport Manual, ed. III - par. 5.2.3.9
MECHANICAL FEATURES
CERTIFICATIONS
COMPLIANCE
• 8” Shallow bases• IR Infrared only - emission light for NVG night
vision
OPTIONS
• Horizontal beam radiation 360°• PMMA inner lens•
• Power Supply 12/24/48 VDC • Power consumption: 8W• LED feeded at costant current
OPTICAL FEATURES
ELECTRICAL FEATURES
Elevation (E) Luminous Intensity
30° 10 cd
50 cd
100cd
100 cd
10 cd
25°
20°
3°
0°
-180° Azimuth +180°
Drawings and photos are for informational purposes only and can change without notice.
100cd10°
SIDE VIEW
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 20
HELIPORT LIGHTSHELIPORT LIGHTS
Patented Beacon: EU 02811174/0001-0006; Australia 201611680; Canada 167812; USA 29/560,345.
FLIGHT PATH ALIGNMENT GUIDANCE LIGHT INSET - FPAG-LXS-INSET
FEATURES
⇢ Steady burning WHITE light⇢ Long life time >10 years life expectancy
⇢ Low consumption
⇢ Stabilised light output
⇢ Easy to install
⇢ No RF-radiations
⇢ Low surface projection 11mm max
EASY INSTALL
BASE DOME
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
ICAO
COMPLIANCECERTIFICATIONS
6020
Based on LED technology
Anodised aluminium shallow base 5”
Glass cover protection
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 21
HELIPORT LIGHTSHELIPORT LIGHTSFLIGHT PATH ALIGNMENT GUIDANCE LIGHT INSET
TECHNICAL SPECIFICATIONS AND DRAWINGS
• Horizontal beam radiation 360°• PMMA inner lens•
• Anodised aluminium body • Silicone gasket• Degree of protection IP66• Operating temperature: -20°C to +60°C• Storage temperature: -25°C to +85°C• Lamp unit weight: 2,3kg
• CE Marking
• Power Supply 12/24/48 VDC • Power consumption: 2,5W• LED feeded at costant current
MECHANICAL FEATURES
CERTIFICATIONS
OPTICAL FEATURES
ELECTRICAL FEATURES
Elevation (E) Luminous Intensity
20° < E ≤ 90° 3 cd
8 cd
15 cd
30 cd
15 cd
13° < E ≤ 20°
10° < E ≤ 13°
5° < E ≤ 10°
2° ≤ E ≤ 5°
-180° Azimuth +180°
PART NUMBER
FPAG-LXS-INSET
• ICAO, Annex 14, Vol. II - Heliports - par. 5.3.4 ICAO Heliport Manual, ed. III - par. 5.4
COMPLIANCE
Drawings and photos are for informational purposes only and can change without notice.
• 8” Shallow bases• IR Infrared only - emission light for NVG night
vision
OPTIONS
SIDE VIEW
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 22
HELIPORT LIGHTSHELIPORT LIGHTS
Patented Beacon: EU 1929910-0001; Canada 1929910-0001; USA D673,474; Turkey TR2012 05662.
tested at 240km/h(150mph) EASY INSTALL
BASE DOME
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
ICAO
COMPLIANCE
ENAC
CERTIFICATIONS
4520
3500
APPROACH LIGHT - FLASHING LIGHTHAL-LXS-FL
FEATURES⇢ Long life time >10 years life expectancy
⇢ Max 3.500cd, WHITE flashing (60fpm) light⇢ Low consumption
⇢ Stabilised light output
⇢ Lightweight and compact⇢ Low wind load factor
⇢ Alarm/remote status control⇢ Easy to install
⇢ No RF-radiations
⇢ Light output alignment device
⇢ Adjustable intensity 3%, 10%, 100% through external digital switch for flashing light ⇢ Flash sequence starting from the outermost light and progress towards the crossbar
Power connector PLUG&PLAY: IP68/69k
Anodised aluminium body
Based on LED technology
Anti-condensation Gore-Tex valve
Chimney effect for optimum cooling of the beacon
Spirit level
Air-cooling system for +65% heat dissipation
Borosilicate glass cover protection
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 23
HELIPORT LIGHTSHELIPORT LIGHTSAPPROACH LIGHT - FLASHING LIGHT
TECHNICAL SPECIFICATIONS AND DRAWINGS
• Anodised aluminum body with heat-sink for natural draft air cooling
• RAL7035 painted aluminum body lamp• Bottom wind collector for central heat-sink
cooling• Borosilicate glass cover protection• Silicone gasket• Anti-condensation Gore-Tex valve• Power supply connector PLUG&PLAY: IP68/69k• Degree of protection: IP66• Operating temperature: -20°C to +45°C• Storage temp. range: -20°C to +45°C• Lamp unit weight: 6kg approx.
• CE Marking
• ENAC Regulation: “Costruzione ed esercizio degli eliporti”, Edition I - par. 3.3
• ICAO, Annex 14, Vol. II - Heliports - par. 5.3.3
MECHANICAL FEATURES
CERTIFICATIONS
COMPLIANCE
PART NUMBER• Automatic changeover from normal to backup led circuit
• AC power supply 110-230VAC• GPS (Global Position System) syncro
OPTIONS
• Horizontal beam radiation 360°• PMMA lens •
• Avarage power consumption @60fpm: 18W• LED feeded at constant current• Lightning protection• Power supply 24VDC
OPTICAL FEATURES
ELECTRICAL FEATURES
Elevation (E)
15° 250cd
2500cd
3500cd
3500cd
2500cd
250cd
9°
6°
5°
2°
0°
-180° Azimuth +180°
Luminous Intensity
HAL-LXS-FL
SIDE VIEW
BOTTOM VIEW
ø156
ø7
78
60°
Ø 215
220
TOP VIEW FRONT VIEW PANEL SIDE VIEW PANEL200
IS305015
300
500
345
460
Phone: +39-0341-260926
LUXSOLAR E-Mail: [email protected]: +39-0341-577747
Web: www.luxsolar.com
Freq (Hz):
Power (VA):
Volt (V):
Sn°:
Year :
Job N°:
AWL CONTROL PANEL
LXS
NON-BREAKABLEBODY
Drawings and photos are for informational purposes only and can change without notice.
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 24
HELIPORT LIGHTS
tested at 240km/h(150mph) EASY INSTALL
BASE DOME
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
ICAO
COMPLIANCE
ENAC
CERTIFICATIONS
4520
3500
Patented Beacon: EU 1929910-0001; Canada 1929910-0001; USA D673,474; Turkey TR2012 05662.
APPROACH LIGHT - STEADY BURNINGHAL-LXS-SB
FEATURES⇢ Long life time >10 years life expectancy
⇢ Max 350cd, WHITE steady burning light⇢ Low consumption
⇢ Stabilised light output
⇢ Lightweight and compact⇢ Low wind load factor
⇢ Alarm/remote status control⇢ Easy to install
⇢ No RF-radiations
⇢ Light output alignment device
⇢ Adjustable intensity 10%, 30%, 100% through external digital switch for steady burning light
Power connector PLUG&PLAY: IP68/69k
Anodised aluminium body
Based on LED technology
Anti-condensation Gore-Tex valve
Chimney effect for optimum cooling of the beacon
Spirit level
Air-cooling system for +65% heat dissipation
Borosilicate glass cover protection
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 25
APPROACH LIGHT - STEADY BURNINGTECHNICAL SPECIFICATIONS
HELIPORT LIGHTS
• Anodised aluminum body with heat-sink for natural draft air cooling
• RAL7035 painted aluminum body lamp• Bottom wind collector for central heat-sink
cooling• Borosilicate glass cover protection• Silicone gasket• Degree of protection: IP66• Anti-condensation Gore-Tex valve• Power supply connector PLUG&PLAY: IP68/69k• Operating temperature: -20°C to +45°C• Storage temp. range: -20°C to +45°C• Lamp unit weight: 6kg approx.
• CE Marking
• ENAC Regulation: “Costruzione ed esercizio degli eliporti”, Edition I - par. 3.3
• ICAO, Annex 14, Vol. II - Heliports - par. 5.3.3
MECHANICAL FEATURES
CERTIFICATIONS
COMPLIANCE
PART NUMBER• AC power supply 110-230VAC• Auto changeover from normal to backup• Led circuit
OPTIONS
HAL-LXS-SB
• Horizontal beam radiation 360°• PMMA lens •
• Avarage power consumption: 10W• LED feeded at constant current• Lightning protection• Power supply 24VDC
OPTICAL FEATURES
ELECTRICAL FEATURES
Elevation (E)
15° 25 cd
250 cd
350 cd
350 cd
25 cd
9°
6°
5°
2°
0°
-180° Azimuth +180°
Luminous Intensity
250 cd
Drawings and photos are for informational purposes only and can change without notice.
SIDE VIEW
BOTTOM VIEW
ø156
ø7
78
60°
Ø 215
220
TOP VIEW FRONT VIEW PANEL SIDE VIEW PANEL200
IS305015
300
500
345
460
Phone: +39-0341-260926
LUXSOLAR E-Mail: [email protected]: +39-0341-577747
Web: www.luxsolar.com
Freq (Hz):
Power (VA):
Volt (V):
Sn°:
Year :
Job N°:
AWL CONTROL PANEL
LXS
NON-BREAKABLEBODY
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 26
HELIPORT LIGHTS
EASY INSTALL
BASE COVER
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
ICAO
CERTIFICATIONS
6050
10.000PY
HELIPORT FLOODLIGHTHFL-LXS-10K
FEATURES
⇢ Long life time >10 years life expectancy
⇢ 10.000cd, WHITE steady burning⇢ Light emission angle adjustable⇢ Easy to install
GRP J.Box body
Based on LEDtechnology
AISI 304 bracket
Anti-condensationGore-Tex valve
Fragible support
Tempered glasscover protection
AISI 304 L-shape bracket
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 27
HELIPORT FLOODLIGHTTECHNICAL SPECIFICATIONS AND DRAWINGS
HELIPORT LIGHTS
• Horizontal light emission: 60°• Vertical light emission: as per ICAO rule
• Aluminium body C/W frangible support• Degree of protection: IP66• Operating temperature: -50°C to +60°C• Cover: borosilicate
• Heliport (for complete 360° coverage of landing area no. 06 HFL-LXS-10K are required)
• CE Marking• ICAO
• Power consumption: 24W• Power supply: 110/230VAC 50/60Hz
MECHANICAL FEATURES
APPLY TO
CERTIFICATIONS
• ICAO, Annex 14, Vol. II, “Heliports” - par. 5.3.10• ICAO Heliport Manual, ed. III - par. 5.2.3.12• ENAC, regulation “Costruzione ed esercizio
degli eliporti” - ed. I - par. 3.9• CAP437 “Standards for offshore helicopter
landing areas”, ed. 8th, Appendix G
COMPLIANCE
PART NUMBER
OPTICAL FEATURES
ELECTRICAL FEATURES
• Power supply: 12/24VDC
OPTIONS
TOP VIEWSIDE VIEW BOTTON VIEW
Drawings and photos are for informational purposes only and can change without notice.
HFL-LXS-10K
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 28
HELIPORT LIGHTS
Patented Beacon: EU 1929910-0001; Canada 1929910-0001; USA D673,474; Turkey TR2012 05662.
HELIHOIST STATUS LIGHTHSL-LXS-CAP437-IP
FEATURES⇢ Light emission: Green Steady: wind turbine is secure for operation; Green Flashing (120fpm): wind turbine is in preparation to accept hoist operation or during operation parameters are moving out of limits; Light Off: wind turbine is not safe for conducting operations;⇢ Long life time >10 years life expectancy
⇢ Low consumption
⇢ Heatsink design improved by induced air⇢ Stabilised light output
⇢ Low wind load factor
⇢ Easy to install
⇢ Light output alignment device
⇢ Alarm / remote status control
Power connector PLUG&PLAY: IP68/69k
Anodised aluminium body
Based on LED technology
Anti-condensation Gore-Tex valve
Chimney effect for optimum cooling of the beacon
Spirit level
Air-cooling system for +65% heat dissipation
Borosilicate glass cover protection
tested at 240km/h(150mph) EASY INSTALL
BASE DOME
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
COMPLIANCECERTIFICATIONS
4520
CAP437
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 29
HELIHOIST STATUS LIGHTTECHNICAL SPECIFICATIONS AND DRAWINGS
HELIPORT LIGHTS
• Painted aluminium body RAL 7035• Borosilicate glass cover protection• Degree of protection: IP66• Operating temperature: -20°C to +45°C• Storage temp. range: -20°C to +45°C• Lamp unit weight: 6kg approx• Total Lamp Height 266mm, diameter 215mm
(single and twin)
• Offshore heliport platforms, located on the nacelle and used to indicate to pilot the status (safe or unsafe) of the wind turbine before commencing of any hoist operation
• CE Marking
• CAP437 “Standard for offshore Helicopter donating Areas” Ch. 10 and Appendix J
• CAP437 “Policy and guidelines on wind turbines”, Ch. 4
MECHANICAL FEATURES
APPLY TO
CERTIFICATIONS
COMPLIANCE
PART NUMBER
• Colour aviation: GREEN• Horizontal beam radiation 360°• Vertical beam radiation: See table 1• PMMA lens
• Separate groups LEDs• 220-240 Vac +6%-10% 50/60Hz; 100-130 Vdc
nominal operating voltage;• Power consumption 56W• Led constant current• LED supply current stabilised by constant
current generator• Efficiency >91%; PFC factor 0,9
OPTICAL FEATURES
ELECTRICAL FEATURES
• Lightning protection• Twin version: two galvanically separated circuits in
the same fixture
OPTIONS
Min. Intensity Max. Intensity
2° to 10° >10° to 90° 0° to 15° >15° to 90°
Day 410cd 16cd 750cd 120cd
Night 16cd 3cd 60cd 60cd
Table 1
HSL-LXS-CAP437-IP
SIDE VIEW
ø156
ø7
78
60°Ø 215
220
BOTTOM VIEW FRONT VIEW PANEL SIDE VIEW PANEL200
IS305015
300
500
345
460
Phone: +39-0341-260926
LUXSOLAR E-Mail: [email protected]: +39-0341-577747
Web: www.luxsolar.com
Freq (Hz):
Power (VA):
Volt (V):
Sn°:
Year :
Job N°:
AWL CONTROL PANEL
LXS
NON-BREAKABLEBODY
= Helihoist Status Light = Obstruction LightDrawings and photos are for informational purposes only and can change without notice.
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 30
HELIPORT LIGHTS
SOCK
100%
MAST
APPLICATIONS
FEATURES
COMPLIANCE
ICAO
polyester
Fiberglass100%
CERTIFICATIONS
FEATURES
⇢ Sock colour: ORANGE/WHITE/RED&WHITE stripes
⇢ Designed to be visible from up to 200m above
⇢ Fully frangible (as per ICAO requirement)⇢ Available formats: - FAA Type L806 Style I-B, size 1: Ø45cm - L: 2,5m - h: max 3m; - ICAO Ø60cm - L: 2,4m - h: max 3m.
⇢ Full 360° limitless rotation
Polyester Sock
Fiberglass Mast
Obstruction light
HELIPORT WINDSOCK HLW-LXS
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 31
• Sock material: Polyester• Sock dimensions: 2,4m long x 0,60m throat
diameter x 0,30m tail diameter• Mast material: fiberglass• Mast height: max. 3m
• Ø30cm or Ø90cm on request• Other mast height on request
• Power supply 24VDC• Power Consumption 20W• Led constant current
• CE Marking
• ICAO Annex 14 Vol. II Heliports - par. 5.1.1• ICAO Annex 14 Vol. I Visual Aids - par. 5.1.1
MECHANICAL FEATURES
OPTIONS
ELECTRICAL FEATURES
CERTIFICATIONS
COMPLIANCE
HELIPORT WINDSOCK TECHNICAL SPECIFICATIONS & DRAWINGS
HELIPORT LIGHTS
Drawings and photos are for informational purposes only and can change without notice.
3m (max)
Ø45cm (FAA)Ø60cm (ICAO)
PART NUMBER
HLW-LXS-45 (FAA)
HLW-LXS-60 (ICAO)
HELIDECK PRODUCTS
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 34
HELIDECK LIGHTS
EASY INSTALL
BASE DOME
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
COMPLIANCECERTIFICATIONS
4060
52
ICAO
ENAC
Patented Beacon: Italy 273119.
HB - HELIDECK BEACONHB-LXS-Ex-8
FEATURES⇢ Morse code “H” White light, night mode
⇢ Long life time >10 years life expectancy
⇢ Low consumption
⇢ Stabilised light output
⇢ Lightweight⇢ Low wind load factor
⇢ Alarm/remote status control⇢ Easy to install
⇢ No RF-radiations
⇢ Light output alignment device⇢ Adjustable intensity 3%, 10% and 100% through external digital switch⇢ ATEX execution: Ex II 2GD Ex de IIC T4 Gb Ex tb IIIC T135°C Db IP66
⇢ IECEx execution: Ex db e IIC T4 Gb Ex tb IIIC T135°C Db IP66
Stabilised light output
RAL 7035 painted aluminium body lamp
Borosilicate glass cover protection
Based on LED technology
Thread M25
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 35
HELIDECK LIGHTSHB - HELIDECK BEACON
TECHNICAL SPECIFICATIONS AND DRAWINGS
• Anodised aluminium body with heat-sink for natural draft air cooling
• RAL7035 painted aluminium body lamp• Borosilicate glass cover protection• Silicon gasket• Degree of protection IP66• Operating temperature -52°C to +40°C/60°C• Storage temp. range -52°C to +60°C• Lamp unit weight: 15,5kg approx
• ATEX certificate no.: INERIS 01ATEX0019X• IECEx certificate no.: IECEx INE 15.0031X• CE Marking
• ICAO, Annex 14, Vol. II - Heliports - par. 5.3• ENAC: Regulation “Costruzione ed esercizio
degli eliporti” Vol. II - Heliports, ed. I - par. 3.2• ICAO Heliport Manual, ed. III - par. 5.2.3.2
MECHANICAL FEATURES
CERTIFICATIONS
COMPLIANCE
PART NUMBER
• Average power consumption 13W
ELECTRICAL FEATURES*
• A helideck beacon should be provided at a helideck where: 1. long-range and clear visual guidance is considered necessary; 2. identification of the helideck is difficult due to surrounding lights.
APPLY TO
• Horizontal beam radiation 360°• PMMA lens• Borosilicate glass protection•
OPTICAL FEATURES
10° 250cd
750cd
1700cd
2500cd
2500cd
1700cd
7°
4°
2°½
1°½
0°
-180° Azimuth +180°
Elevation (E) Luminous Intensity
HB-LXS-Ex-8
Drawings and photos are for informational purposes only and can change without notice.
FRONT VIEW
FIXING DETAILS
SIDE VIEW
• Power supply 24VDC prom controller
OPTIONS* This beacon requires e dedicated control panel.
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 36
HELIDECK LIGHTS
EASY INSTALL
BASE DOME
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
COMPLIANCECERTIFICATIONS
5560
40
ICAO
70
ENAC
AISI 316L
CAP437
PERIMETER LIGHT Ex - TLOFSST-LXS-Ex-TLOF
FEATURES⇢ Steady burning GREEN light⇢ Long life time >10 years life expectancy
⇢ Low consumption
⇢ Stabilised light output
⇢ Lightweight and compact⇢ Low wind load factor⇢ Easy to install
⇢ No RF-radiations
⇢ ATEX execution: Ex II 2GD Ex db IIC T... Gb
⇢ IECEx execution: Ex db IIC T... GbNatural finish SS316L body
Borosilicate glass cover protection
Based on LED technology
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 37
HELIDECK LIGHTSPERIMETER LIGHT Ex - TLOF
TECHNICAL SPECIFICATIONS AND DRAWINGS
• Horizontal beam radiation 360°•
• Natural finish SS316L body• Borosilicate Glass Dome• Complete with floor mounting• Degree of protection: IP66• Operating temperature:
-40°C to +55°C / +60°C / +70°C• Storage temperature: -20°C to +52°C• Lamp unit weight: 6kg approx• Total lamp: 176x125x125mm
• ATEX certificate: PRESAFE 16ATEX8567X• IECEx certificate: IECEx PRE 16.0051X • CE Marking
• ENAC Regulation: “Costruzione ed esercizio degli eliporti”, Edition I, Par. 3.6
• CAP437 “Standard for offshore Helicopter donating Areas”, Chapter 4
• ICAO, Annex 14, Vol. II - Heliports - par. 5.3.7• ICAO, Heliport Manual, Ed. III - par. 5.2.3.8
MECHANICAL FEATURES
CERTIFICATIONS
COMPLIANCE
PART NUMBER
• Power supply 24VDC
OPTIONS
OPTICAL FEATURES
• Power consumption: 6.72W• AC power supply 230VAC• LED feeded at costant current
ELECTRICAL FEATURES
Elevation (E)
20° < E ≤ 90° 3 cd
8 cd
15 cd
30 cd
15 cd
13° < E ≤ 20°
10° < E ≤ 13°
5° < E ≤ 10°
2° ≤ E ≤ 5°
-180° Azimuth +180°
Luminous Intensity
125
101
89.5 105
176
125
FRONT VIEW BOTTOM VIEWTOP VIEW
Drawings and photos are for informational purposes only and can change without notice.
SST-LXS-Ex-TLOF
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 38
HELIDECK LIGHTS
Patented Beacon: Italy 273119.
EASY INSTALL
BASE DOME
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
COMPLIANCECERTIFICATIONS
5560
40
ICAO
70
ENAC
AISI 316L
CAP437 CAA
FEATURES⇢ Colour aviation: RED flashing 120fpm⇢ Min. 700cd between 2° - 10° and at least 176cd at all other angles of elevation⇢ Intensity dimmers to 60cd while helicopter is landed on deck and flash rate dimmers to 60fpm⇢ Long life time >10 years life expectancy
⇢ Low consumption
⇢ Stabilised light output
⇢ Low wind load factor
⇢ Easy to install
⇢ Light output alignment device⇢ Alarm/remote status control⇢ Light intensity emission adjustable from remote⇢ ATEX execution: Ex II 2GD Ex de IIC T ... Gb Ex tb IIIC T135°C Db IP66
⇢ IECEx execution: Ex db e IIC T4 Gb Ex tb IIIC T135°C Db IP66
Stabilised light output
RAL 7035 painted aluminium body lamp
Borosilicate glass cover protection
Based on LED technology
Thread M25
Heatsink design improved by induced air
HELIDECK STATUS WAVE OFF LIGHTWOL-LXS-CAP437-Ex-8
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 39
HELIDECK LIGHTSHELIDECK STATUS WAVE OFF LIGHT
TECHNICAL SPECIFICATIONS
• Painted aluminium body RAL 7035• Borosilicate glass cover protection• Terminal box for 2,5mm2 wires• Cable gland type: M20x1.5• Degree of protection IP66• Operating temp. range: -52°C to +40°C/+60°C• Storage temp. range: –52°C to +60°C• Total Lamp Height 594mm, diameter 281mm
(single and twin)• Unit weight: 15,5kg approx (16kg twin)• Protection fuse 5x20 3,15 AT
MECHANICAL FEATURES
• ATEX certification no. : INERIS 01 ATEX0019X• IECEx certification no.: IECEx INE 15.0031X• CE Marking• CAP437
CERTIFICATE
• CAP437 “Standard for offshore Helicopter denoting Areas”, par. 4.25
• CAA Paper 2008/01 “Specification for an offshore helideck status light system”
WOL-LXS-CAP437-Ex-8
COMPLIANCE
PART NUMBER
FRONT VIEW
FIXING DETAILS
SIDE VIEW
Drawings are for informational purposes only and can change without notice.
• Horizontal beam radiation 360°• PMMA lens•
• Separate groups LEDs• 220-240 Vac +6% -10% 50/60Hz; 100-130 Vdc
nominal operating voltage;• Power consumption 56W• Led constant current• LED supply current stabilised by constant current
generator• Efficiency >91%; PFC factor 0,9
OPTICAL FEATURES
ELECTRICAL FEATURES*
• The aeronautical meaning of a flashing red light is either “do not land, aerodrome not available for landing” or “move clear of landing area”
APPLY TO
• Lightning protection• Twin lamp• Power supply 24VDC
OPTIONS
* This beacon requires e dedicated control panel.
Elevation (E)
2° < E ≤ 10° min. 700cd
176cd>10°
-180° Azimuth +180°
Luminous Intensity
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 40
HELIDECK LIGHTS
EASY INSTALL
BASE DOME
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
COMPLIANCECERTIFICATIONS
CAP437
AISI 316L
-40°C+55°C/+60°C/+70°C
CAA
REPEATER LIGHT ExSST-LXS-EX-REP
FEATURES⇢ Flashing RED light⇢ Adjustable Min 16cd . Max 60cd according to main Status Wave Off light flash rate⇢ Long life time >10 years life expectancy
⇢ Low consumption
⇢ Stabilised light output
⇢ Lightweight and compact⇢ Low wind load factor⇢ Easy to install
⇢ No RF-radiations
⇢ ATEX execution: Ex II 2GD Ex db IIC T... Gb
⇢ IECEx execution: Ex db IIC T... Gb
Natural finish SS316L body
Borosilicate glass cover protection
Based on LED technology
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 41
HELIDECK LIGHTSREPEATER LIGHT ExTECHNICAL SPECIFICATIONS
• ATEX certificate: PRESAFE 16ATEX8567X• IECEx certificate: IECEx PRE 16.0051X • CE Marking
• CAP437 “Standard for offshore Helicopter denoting Areas”, Par. 4.25
• CAA Paper 2008/01 “Specification for an offshore helideck status light system”
CERTIFICATIONS
COMPLIANCE
PART NUMBER
• Horizontal beam radiation 360°•
• Natural finish SS316L body• Borosilicate Glass Dome• Complete with floor mounting• Degree of protection: IP66• Operating temp.: -40°C to +55°C/+60°C/+70°C• Storage temperature: -20°C to +52°C• Lamp unit weight: 6kg approx• Total lamp: 176x125x125mm
MECHANICAL FEATURES*
OPTICAL FEATURES
• Power supply 24VDC
OPTIONS
• Peak power consumption: 10W• AC power supply 230VAC• LED feeded at costant current
ELECTRICAL FEATURES*
Elevation Azimuth Intensity (min)
0° to 90° -180° to +180°min 16cd max 60cd
SST-LXS-EX-REP
125
101
89.5 105
176
125
FRONT VIEW BOTTOM VIEWTOP VIEW
Drawings are for informational purposes only and can change without notice.
* This beacon must be used togheter whit status wave off light are requires a dedicated control panel.
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 42
FEATURES
HELIDECK LIGHTS
EASY INSTALL
BASE
AISI 316Land GRP
APPLICATIONS
FEATURES
LED LIGHT DO NOT STARE INTOTHE BEAM OR VIEW DIRECTLYWITH OPTICAL INSTRUMENTS
CLASS 3R LED PRODUCT
CERTIFICATIONS
4050
7050
T4T5
COMPLIANCE
CAP437 ICAO
HELIDECK FLOODLIGHT ExHFL-LXS-SS316LEx
FEATURES
⇢ Colour LED: WHITE steady burning⇢ Long life time >10 years life expectancy
⇢ Easy to install
⇢ Suitable for Zone: 1 - 2 - 21 - 22⇢ Execution (Floodlight): II 2 GD Ex db IIC T4 or T5 Gb Ex tb IIIC T135°C or T100°C Db
⇢ Execution (Aux. Terminal Box): II 2 GD Ex eb IIC T5 or T6 Gb Ex tb IIIC T100°C or T85°C Db
GRP J.Box body
Cover protection
Based on LED technology
AISI 304 L-shape bracket
AISI 316L Floodlight
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 43
HELIDECK LIGHTSHELIDECK FLOODLIGHT Ex
TECHNICAL SPECIFICATIONS
• CAP437 “Standard for offshore Helicopter denoting Areas” - Chapter 3 and Appendix G
• ATEX: FTZÚ 15 ATEX 0182X (Floodlight)• ATEX: CEC 15ATEX211(Aux. Terminal Box)• IECEx: FTZÚ 15.0035X (Floodlight)• TRCU: RU C-IT.AA87.B.00187 (Floodlight)• TRCU: RU C-IT.AA87.B.00582 (Aux. Terminal Box)• INMETRO: LEC 16.0080X (Floodlight)
COMPLIANCE
CERTIFICATIONS
PART NUMBER
• Horizontal light emission: 60°• Vertical light emission: as per ICAO rule• Stainless Steel non-breakable bracket for base
mounting
• Enclosure material: SS316L• Terminal Box material: GRP• Degree of protection: IP66 • Load dump protection• Ambient temperature: -50°C to +40°C for T5 -50°C to +70°C for T4
MECHANICAL FEATURES
OPTICAL FEATURES
• Flat base for Helideck fix• Power Supply: 12/24VDC
OPTIONS
• Operating voltage: 18V ÷ 32V• Power consumption: 23.76W [=24 W] (500mA)• Power supply: 110/230VAC 50/60Hz
ELECTRICAL FEATURES
HFL-LXS-SS316LEx
350
200
120
120
146
100
175
3120
NON-BREAKABLEBRACKET
SIDE VIEW
TOP VIEW
FRONT VIEW
Drawings are for informational purposes only and can change without notice.
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 44
FEATURES
HELIDECK LIGHTS
SOCK
100%
MAST
APPLICATIONS
FEATURES
COMPLIANCE
ICAO
Pu coatedPolyester
SS316L100%
CERTIFICATIONS
HELIDECK WINDSOCKS MAST ExNOT FRANGIBLE VERSION SUITABLE FOR ZONE 1/2
⇢ Sock colour: ORANGE/WHITE/RED&WHITE stripes⇢ Designed to be visible from up to 200m⇢ Collapsible mechanism*⇢ Obstruction lights to be installed on the top of the pole marking: ○ Ex II 2GD de T6 Gb ○ Ex tb IIIC T67°C Db IP66⇢ Compliance: - ICAO
Pu coated Polyester Sock
SS316L Mast
Obstruction light Ex
Internal light Ex
* Collapsible mechanism: When a helicopter hits the Windsock mast, the pole falls to the ground without breaking
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 45
• Sock dimensions: 2,4m long x 0,60m throat diameter x 0,30m tail diameter
• Mast material: Inox• Mast height: 3m to windsock centerline
• CE Marking
• ICAO Annex 14 Vol. II Heliports - par. 5.1.1• ICAO Annex 14 Vol. I Visual Aids - par. 5.1.1
MECHANICAL FEATURES CERTIFICATIONS
COMPLIANCE
HELIDECK WINDSOCK MAST ExTECHNICAL SPECIFICATIONS & DRAWINGS
HELIDECK LIGHTS
Drawings are for informational purposes only and can change without notice.
• Other mast height on request
• Power supply 24VDC• Power Consumption 20W• Led constant current
OPTIONS
ELECTRICAL FEATURES
PART NUMBER
HDW-LXS-ExZ1HDW-LXS-ExZ2
The Windsock is fixed to SS frame which rotate 360° on concealed SS bearings and can be lit internally using LED light source.
Mirrored Shroud
Windsock
Hinged FootArrangement
up
to
3m
60cm
2.4mObstruction Light
SingleLight
316 Grade Stainless Steel Cage
316 Grade Stainless Steel Sealed Gearings360˚ Rotation
STANDARD WINDSOCK MAST WITH INTERNAL LIGHTING
Base Plate Measurements
Height of Windsock above Ground
Windsock Throat Opening
Windsock Length
280x280mm
<3m
600mm
2400mm
Combustion and Energy SRL - [email protected] - www.luxsolar.com - Ph. +39.0341.260926 46
FEATURES
HELIDECK LIGHTS
SOCK
100%
MAST
APPLICATIONS
FEATURES
COMPLIANCE
ICAO
HypalonGRP
100%
CERTIFICATIONS
HELIDECK WINDSOCKS MAST ExFOR FRANGIBLE VERSION SUITABLE FOR ZONE 2 ATEX
⇢ Sock colour: ORANGE/WHITE/RED&WHITE stripes⇢ Designed to be visible from up to 200m⇢ Frangible Mast*⇢ Obstruction lights to be installed on the top of the pole marking: ○ Ex II 2GD de T6 Gb ○ Ex tb IIIC T67°C Db IP66⇢ Compliance: - ICAO min Ø30cm - L: min 2,4m - h: max 3m.
GRP Mast
Obstruction light Ex
* Frangible Mast: When a helicopter hits the Windsock mast, the pole va in mille pezzi.
Hypalon Sock
Combustion and Energy [email protected] - www.luxsolar.com - Ph. +39.0341.260926 - The contents of this catalogue are subject to change without prior notice due to any improvements and updates made. 47
HELIDECK WINDSOCK MAST ExTECHNICAL SPECIFICATIONS & DRAWINGS
HELIDECK LIGHTS
Drawings are for informational purposes only and can change without notice.
• Sock dimensions: 2,4m long x 0,60m throat diameter x 0,30m tail diameter
• Mast material: GRP• Mast height: max 3m
• CE Marking
• ICAO Annex 14 Vol. II Heliports - par. 5.1.1• ICAO Annex 14 Vol. I Visual Aids - par. 5.1.1
MECHANICAL FEATURES CERTIFICATIONS
COMPLIANCE
• Mast suitsble to be knock down• Other mast height on request
• Power supply 24VDC• Power Consumption 20W• Led constant current
OPTIONS
ELECTRICAL FEATURES
PART NUMBER
HDW-LXS-ExZ2-FR
The Windsock is affixed to SS frame which rotate 360° on concealed SS bearings and can be lit internally using LED light source.
Mirrored Shroud
Windsock
Hinged FootArrangement
up
to
3m
60cm
2.4mObstruction Light
SingleLight
316 Grade Stainless Steel Cage
316 Grade Stainless Steel Sealed Gearings360˚ Rotation
Pole Diameter (at Base)
STANDARD WINDSOCK MAST WITH INTERNAL LIGHTING
Wall Thickness
Base Plate Measurements
Base Plate Thickness
Ground Rod Length (Total)
Height of Windsock above Ground
Windsock Throat Opening
Windsock Length
140mm
4mm
280x280mm
10mm
500mm
<3m
600mm
2400mm
rev_
03-0
9/ 2
019
Android App Luxsolar Apple App Luxsolar
- Registered office: Via per Dolzago, 21 - 23848 Oggiono (LC) - Italy
- Legal office: Via dei Piatti, 3 - 20123 Milan (MI) - Italy
- Phone: +39 0341-260926
- Fax: +39 0341-577747
- E-mail: [email protected]
- Web sites: www.luxsolar.com
Facebook: Luxsolar YouTube: Luxsolar