catalogue daikin vrv iv s

8/19/2019 Catalogue Daikin VRV IV S

1/34

1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.

2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to install the outdoor unit close to the sea shore, contact your local distributor.

Cautions on product corrosion

Warning Ask a qualified installer or contractor to install this product. Do not try to install the product yourself.

Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.

Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or

contractor to install those parts and accessories. Use of unauthorised parts and accessories or

improper installation of parts and accessories can result in water or refrigerant leakage, electrical

shock, fire or explosion.

Read the user's manual carefully before using this product. The user's manual provides important

safety instructions and warnings. Be sure to follow these instructions and warnings.

If you have any enquiries, please contact your local importer, distributor and/or retailer.

For residential and commercial use

Cooling Only 50 Hz

PCVMT1522

All rights reservedPrinted in Vietnam 08/15/006 DAV

S SERIES

- Web: www.savame.com- Email: [email protected] Tel: 08 3512 2727- Hotline: 0978 829 829 (Mr.Hưng)


2/34

Main Features

Indoor Unit Lineup

Specifications

Option List

Control Systems

Air Treatment Equipment Lineup

P03

P09

P34

P47

P53

P63

Contents

First launched in Japan in 1982, the Daikin VRV system has been

embraced by world markets for over 30 years. Now, Daikin proudly

introduces the new VRV IV S series-the ideal air conditioning system

for homes, shops and offices.

HOMES

OFFICES

SHOPS

Engineered for Flexibility S SERIES

14Max.

indoorunits VRV indoor units

BP unit

Residential indoor units

VRV indoor units combine withresidential indoor units, all in one system.

01 02

* VRV is a trademark ofDaikin Industries,Ltd.


3/34

Main Features

03 04

The new design has been optimised for the VRV IV S series, with the height of 4 HP to 5 HP models reduced to only

990 mm. This design gives the building a sleek look externally and provides the occupants with a clear, unobstructedview of the scenery. The VRV IV S series is now slim and compact, with outdoor units that require minimal installation

space.

To suit a variety of room sizes, VRV IV S series expands our range to include 8 HP and 9 HP.

Compact & lightweight design Enhanced lineup

Indoor units can be selected from 2 lineups, both VRV and residential

indoor units, to match rooms and preferences. A mixed combination of

VRV indoor units and residential indoor units can be included into onesystem, opening the door to stylish and quiet indoor units.

Wide variety of indoor units

Height

990 mm26%

Decrease

ProductWeight

71 kg

43%Decrease

VRV S

VRV S4,5HP

ProductWeight

125 kg

Height

1,345 mm

Height

1,430 mm14%

Decrease

Height

1,657 mm

Product Weight

131 kg29%

Decrease

Product Weight

185 kg

Footprint

0.30 m 258%

Decrease

Footprint

0.71 m 2

4 HP(11.2 kW) S SERIES

S SERIES

S SERIES 4, 5 HP

1,345mm 990

mm

320mm320

mm

4 HP(11.2 kW)

Lineup

Model Name RXMQ4AVE RXMQ5AVE RXMQ6AVE RXMQ8AY1 RXMQ9AY1

Power Supply 1-phase, 220- 230 V/220 V, 50/60 Hz 3-phase, 380 – 415 V, 50 Hz

Capacity Range4 HP

(11.2 kW)5 HP

(14.0 kW)6 HP

(16.0 kW)8 HP

(22.4 kW)9 HP

(24.0 kW)

Capacity Index 100 125 150 200 215

6 HP

Mo/C*

5 HP

Mo/C*

4 HP

Mo/C*

*Mo/C represents Model Change

Elegant appearance with

European styleExternal view of a condominium

Internal view of acondominium unit

8 HP 9 HP

S SERIES

5 models

1,430mm

320mm

1,657mm

940mm

765mm

930mm

8HP

S SERIES 8 HP

8 HP(22.4 kW) (22.4 kW)

8 HP

FTKJ-N series indoor unit


4/34

Main Features

05 06

Higher Coefficient of Performance (COP)

VRV IV S series provides greater energy saving as compared to VRV III S series, especially for 6 HP.

Nighttime quiet operation function

Operation sound level selectable from 3 steps for the night mode

Energy saving

Collection of cutting-edge technologies realises efficient an d quiet operation

The high efficiency compressor to achieve a higher COP

Quiet operationSinewaveDCinverter

>> Smooth sine wave DC inverterUse of an optimised sine wave smoothes motor rotation, further improving operating efficiency.

DC fan motor

Efficiency improved in all areas

compared to conventional ACmotors, especially at low speeds.

3

DC fan motor structure

These two features work to reduce sound. Guides are added to

the bell mouth intake to reduce turbulence in the airflow generatedby fan suction. The Aero Spiral Fan features fan blades with the

bent blade edges, further reducing turbulence.

Smooth Air Inlet Bell Mouth and Aero Spiral Fan2

Escaping eddies are sucked in bythe bent blade edges, reducingoverall turbulence.

With the bent

blade edge

Without the bent

blade edge

1

Note: Data are based on studies conducted under controlled conditions at a Daikin laboratory using Daikin products.*1 A neodymium magnet is approximately 10 times stronger than a standard ferrite magnet.*2 The torque created by the change in power between the iron and magnet parts.

Daikin DC inverter models are equipped with the Reluctance DC motor for

compressor. The Reluctance DC motor uses 2 different types of torque, neodymiummagnet*1 and reluctance torque*2. This motor can save energy because it generates

more power with a smaller electric power than an AC or conventional DC motor.

Compressor equipped with Reluctance DC motor

Reluctance DC motor

Conventional DCmotor

ACmotor

Rotational speed (rps)

M o t o r e ffi c i e n c y ( % )

ReluctanceDC motor

3

1

2

90

80

70

60

500 30 60 90 120

More than 20%

More than 20%

Small load

Low capacity

Largeload

High capacity

Set on the outdoor PCB. Time of maximum

temperature is memorised. The low operating modewill initiate 8 hours*1 after the peak temperature in

the daytime, and normal operation will resume 10

hours*2 after that. The operation sound level for thenight mode can be selected from 49 dB(A) (Step 1),

46 dB(A) (Step 2) and 43 dB(A) (Step 3).*3

Automatic modeMode 1.

Starting time and ending time can be input. (An

external control adaptor for outdoor unit,

DTA104A53/61/62, and a locally obtained timer arenecessary.)

Manual modeMode 2.

Combinations of modes 1 and 2 can be used

depending on your needs.

Combined modeMode 3.

*1. Initial setting. Can be selected from 6, 8 and 10 hours.*2. Initial setting. Can be selected from 8, 9 and 10 hours.*3. In case of 4 HP outdoor unit during cooling operation

Automatic modeMode 1.

Note: • This function is available in setting at site.

• The relationship of outdoor temperature (load) and time shown in thegraph is just an example.

Peak in outdoor temperature

C a p a c i t y %

8 hrs 10 hrs

O p e r a t i o n s o u n d d B ( A )

49

8:00 12:00 16:00 20:00 0:00 4:00 8:00

50

100

52

0

L o a d %

Night mode endsNight mode starts

Night mode endsNight mode starts

NightMode

46

43

(Initial setting)(Initial setting)

Step1 max.-3dB(A)

Step2 max.-6dB(A)

Step3 max.-9dB(A)

Step1:49 dB(A)

Step2:46 dB(A)

Step3:43 dB(A)

The capacity reduction rate differs depending on the operation sound level step selected.

S SERIES

VRV S

0

3.2

3.4

3.6

3.8

4

6 HP

3.80

3.56

3.863.77

3.49

CoolingOperationCOP

4 HP(11.2 kW)

5 HP(14.0 kW) (16.0 kW)

8 HP(22.4 kW)

9 HP(24.0 kW)

3.89 3.863.77

3.493.56

12%Increase

Sucked gas is

compressed in the

scrolling part before theheated motor, so that

the machine compress

the non-expanded gas,resulting in high efficiency compression.

>> The structural scroll>> Swing compressor

Scrollsection

Suction

Discharge Motorsection

RXMQ 4, 5, 6AVE RXMQ8, 9AY1

Daikin swing compressor has integrated therotor with the blade, completely solving the

refrigerant leakage and the wear problem

caused by the mechanical friction between therotor and the blade, which enhances the

compressor efficiency and makes the

compressor more quiet and durable.

*Cooling operation conditions: Indoor temp. of 27ºCDB,19ºCWB, and outdoor temp. of 35ºCDB.


5/34

Main Features

07 08

Connectable up to 14 indoor units

As many as 14 indoor units can be connected to a single outdoor unit, making the VRV IV S series a remarkablyversatile system.

Automatic test operation

Simply press the test operation button and the unit performs an automatic system check, including wiring, stop valves,

piping, and refrigerant charging amount. The results are returned automatically after the check finishes.

Simple wiring and piping connection

Unique piping and wiring systems make it possible to install a VRV IV S series quickly and easily.

Design flexibility and simplified installation

When only VRV indoor units are connected

Long piping length offers flexibility in the choice of installation positions, and simplifies system planning.

Long piping design possible

14 indoorunitsMax.

BP unit BP unit

VRV indoor units


Daikin’s advanced REFNET piping systemmakes installation easy. Only two main

refrigerant lines are required in any one

system. REFNET greatly reduces theimbalances in refrigerant flow between

units, while using small-diameter piping.

>> REFNET piping system

A super wiring system is used to enable

shared use of the wiring between indoorand outdoor units and the central control

wiring, with a relatively simple wiring

operation.The DIII-NET communication system is

employed to enable the use of advancedcontrol systems.

>> Super wiring system

Outdoor unit

Indoor unit

Note: Total capacity index of connectable indoor units must be 50-130% of the capacity index of the outdoor unit.

Refer to page 46 for the maximum number of connectable indoor unit.

When a mixed combination of VRV and residential indoor units is connected or

when only residential indoor units are connected

Max. allowable pipinglength

Max. & min.allowable pipinglength

Min.allowablepiping length

Max. allowable leveldifference Outdoor unit - the indoor

unit

BP unit - indoor unit

Between the indoor units

Between BP units

The first indoor branch - the farthest BP or VRV indoor unit

Total piping length

Refrigerant piping length

Outdoor unit - the first indoor branch

10 m

10 m

l

m

n

n

o

a+b+c+d+e+f+g+h+i+j+k

b+c+g, b+c+d

a+b+c+g+k, a+b+c+d

h, i, j, k

a

50 m

250 m

40 m

2 m–15 m

2 m–12 m

2 m–8 m

5 m

30 mIf the outdoor unit is above

If the outdoor unit is below

If indoor unit capacity index < 60

If indoor unit capacity index is 60

If indoor unit capacity index is 71

30 m

30 mOutdoor unit - the BP unit

4HP

15 m

15 m

70 m

250 m

40 m

2 m–15 m

2 m–12 m

2 m–8 m

5 m

30 m

30 m

30 m

5HP

15 m

15 m

100 m

250 m

40 m

2 m–15 m

2 m–12 m

2 m–8 m

5 m

50 m

40 m

40 m

6-9HP

Max. allowable leveldifference

Max. allowable pipinglength

Between the outdoor unitand the indoor unit

Between the indoor units

Between the first indoor branch and the farthest indoor unit

Total piping length

Refrigerant piping length

j

a+b+c+d+e+f+g+h+i

a+b+c+d+i

b+c+d+i

50 m

250 m

40 m

4HP

70 m

300 m

40 m

5HP

120 m

300 m

40 m

6HP

100 m

300 m

40 m

8,9HP

kIf the outdoor unit is above

If the outdoor unit is below k

10 m

30 m

30 m

15 m

30 m

30 m

15 m

50 m

40 m

15 m

50 m

40 m

120Max. mActual piping length

300Max. m Total piping length

100Max. mActual piping length

250Max. m Total piping length

Max.

50 mMax.

15 m

a

i

j

k

dcb

hgfe

First indoor branch

Max.

50 m

Max.

40 mMax.

15 m

Max.

15 m

a

o

l

n

dcb

gfe

First indoor branch

mh i

j

k

BP

RA RA

RA

RA

VRV

VRV

BP


6/34

09 10

VRV indoor units 19 types 99 models 6 types 18 modelsResidential indoor units with connection to BP units

A mixed combination of VRV indoor units and residential indoor units can be included intoone system, opening the door to stylish and quiet indoor units.

Enhanced range of choices

*Refer to page 46 for the maximum number of connectable indoor units.

VRV indoor units

BP unit


VRV indoor units combine with indoor units, all in one system.

14Max.

indoorunits

14Max.

indoorunits

25 35

25 35

2.5 3.5

50 60 71

50 60 71

5.0 6.0 7.1Rated Capacity (kW)Type Model Name

Capacity Index

Slim CeilingMounted Duct

Wall Mounted

FDKS-EAVMB

FDKS-C(A)VMB

FTKS-DVM

FTKS-FVM

(700mmwidthtype)

(900/1,100mmwidth type)

FTKJ-NVMW

FTKJ-NVMS

FXFQ-SVM

FXFQ-LUV1

FXZQ-MVE

FXUQ-AVEB

FXCQ-MVE

FXKQ-MAVE

FXMQ-PVE

FXMQ-MAVE

FXHQ-MAVE

FXAQ-PVE

FXLQ-MAVE

FXNQ-MAVE

Type Model Name 0 .8 HP 1 H P 1 .2 5H P 1 .6 HP 2 H P 2. 5H P 3 HP 3 . 2H P 4 HP 5 HP 6 HP20 25 32 40 50 63 71 80 100 1 25 140

8HP 10HP

20 25 31.25 40 50 62.5 71 80 100 125 140 200 250

2 00 2 50

Capacity Range

Capacity Index

(700 mmwidth type)

(900/1,100mmwidthtype)

FXDQ-PBVE(with drain pump)

FXDQ-PBVET(without drain pump)

FXDQ-NBVE(with drain pump)

FXDQ-NBVET(without drain pump)

Ceiling MountedCassette(RoundFlow with Sensing)

Ceiling MountedCassette(Round Flow)

Ceiling MountedCassette(Compact Multi Flow)

4-Way FlowCeiling Suspended

Ceiling MountedCassette(Double Flow)

Ceiling MountedCassette Corner

Slim CeilingMounted Duct(Standard Series)

FXDQ-SPV1Slim CeilingMounted Duct(Compact Series)

Ceiling MountedDuct

Ceiling Suspended

Wall Mounted

Floor Standing

ConcealedFloor Standing

Floor StandingDuct

FXVQ-NY1

FTKS-BVMA

Middle StaticPressure CeilingMounted Duct

FXSQ-PVE

VRV indoor units only


7/34

Indoor Unit Lineup

11 12

Presence of people and floortemperature can be detected toprovide comfort and energy savings

Ceiling Mounted Cassette

(Round Flow) Type

4-Way Flow Ceiling

Suspended Type

This slim and stylish indoor unitachieves optimum air distribution,and can be installed without theneed for ceiling cavity


(Double Flow) Type

Thin, lightweight, and easy to install innarrow ceiling spaces

Slim Ceiling Mounted Duct Type

(Standard Series)

Slim design, quietness andstatic pressure switching


(Compact Multi Flow) Type

Quiet, compact, and designed foruser comfort

Ceiling Mounted CassetteCorner Type

Slim design for flexible installation

360 airfl ow improves temperaturedistribution and offers a comfortableliving environment.


(Round Flow with Sensing) Type

FXFQ-SVM FXFQ-LUV1

FXZQ-MVE

FXUQ-AVEB

FXCQ-MVE

FXKQ-MAVE FXDQ-PBVE(T)

FXDQ-NBVE(T)


(Compact Series)

Slim and compact design for easy andflexible installation

FXDQ-SPV1

Ceiling Suspended Type

Slim body with quiet and wide airflow

FXHQ-MAVE

Slim Ceiling MountedDuct Type

Slim and smooth design suitsyour shallow ceiling

FDKS-EAVMB

FDKS-C(A)VMB

Elegant appearance withEuropean style

Wall Mounted Type

Wall Mounted Type

Stylish flat panel harmoniseswith your interior décor

FTKJ-NVMW

FTKJ-NVMS

FTKS-DVM

FTKS-BVMA

FTKS-FVM

Ceiling Mounted Duct Type

High external static pressureallows flexible installations

FXMQ-PVE

FXMQ-MAVE

Wall Mounted Type

Stylish flat panel designharmonised with your interiordécor

FXAQ-PVE

Floor Standing Duct Type

Large airfiow type for large spaces.Flexible interior design for each tenant.

FXVQ-NY1

Floor Standing Type

Concealed Floor Standing Type

Suitable for perimeter zone airconditioning

FXLQ-MAVE

FXNQ-MAVE

VRV indoor units

Residential indoor units with connection to BP units

Daikin offers a wide range of indoor units includes both VRV and residential models responding to variety of needs of

our customers that require air-conditioning solutions.

Middle Static Pressure CeilingMounted Duct Type

FXSQ-PVE

Middle external static pressureand slim design allow flexible installationsMiddle external static pressureand slim design allow flexible installations


8/34

Indoor Unit Lineup

13 14

VRV Indoor Units

Ceiling Mounted Cassette (Round Flow with Sensing) Type

FXFQ25S / FXFQ32S / FXFQ40S

FXFQ50S / FXFQ63S / FXFQ80SFXFQ100S / FXFQ125S

Presence of people and floor temperature can be

detected to provide comfort and energy savings

Thanks to the individual airflow direction controlfunction, airflow direction can be individually adjustedfor each air discharge outlet to prevent uncomfortabledrafts and to deliver optimal air distribution.

The sensor detects human presence and adjusts theairflow direction automatically to prevent drafts.

The sensor detects the floor temperature and automaticallyadjusts operation of the indoor unit to reduce thetemperature difference between the ceiling and the floor.

Infrared presence sensor

Infrared floor sensor

Ceiling height

Detection range (diameter)

2.7mapprox.

11m

3.5mapprox.

14m

4.0mapprox.

16m

*2. The infrared floor sensor detects at the floor surface.

*1. The infrared presence sensor detects 80 cm above the floor.

*2

Ceiling height

Detection range (diameter)

2.7mapprox.8.5m

3.5mapprox.11.5m

4.0mapprox.13.5m

*1

Individual airflow direction control

Sensing function

A

D

C

B

Dead spot of airflow

With the Auto airflow direction mode, flaps arecontrolled to deliver optimal air distribution for both coolingand heating operations when there are no people.

Indoor unit offers 360° airflow discharges air in alldirections with more uniform temperature distribution.

When a person is detected, drafts are prevented bymaking the flap horizontal.

When a person is not detected for 5 minutes,the unit automatically returns to controlling theflaps for an unoccupied room.

Swing Swing Blown horizontally

Selectable airflow rate: 3 steps and Auto.(Auto airflow rate is available when BRC1E62 is used.)

Improved energy efficiency thanks to a new heatexchanger with smaller tubes, DC fan motor, and DC drainpump motor.

Drain pump is equippedas standard accessorywith 850 mm lift.

Low operation sound level

45/40/35

125

44/38/32

100

38/35/31

80

38/33/28

63

36/32/28

50

31/29/27

4025/32

30/28.5/27Sound level

(H/M/L)

FXFQ-S

850 mm

Detecting thepresence ofpeople in 4 areas

Draft prevention function (default: OFF) *1. 2

Cooling Dry

Detecting the averagetemperature of indoor floor

Auto airflow direction mode

*1.Airflow direction shoud be set to Auto. *2.Draft prevention function is OFF in the initial setting. It can be set ON using the remote controller.

When there is a large difference between the ceiling and floor temperatures, the airflow rate is automatically increased.When the difference becomes small, the airflow rate is automatically reduced.

*1.Both airflow direction and airflow rate shoud be set to Auto. *2.Draft prevention function is set OFF in the initial setting.

Comfort and Energy saving preventing over Cooling *1. 2

Floor temperature is detected and over cooling prevented.

To increase comfort, Auto airflow rate mode controls the airflow in accordance withthe difference between floor and ceiling temperatures.

The temperature near the person is automatically calculated by detecting the temperature of the floor. Energy issaved, because the area around the feet does not get too cold.

Auto airflow direction mode +Auto airflow rate mode

Without sensing function With sensing function

30°C near ceiling

20°C near floor

Roomtemperature is

detected as30°C.

Area around feet gets too cold because air conditionercontinues until the temperature near the ceiling reaches theset temperature.

Room temperature iscalculated as 27°C in the area which

is in the vicinity of the person.

24°C near floor

30°C near ceiling

The floor temperature,which is lower than nearthe ceiling, is detected.

Energysavings

Automatic control using thetemperature near the personas the room temperature.

Cooling

When human presence not detected. When human presence detected.


9/3415 16

Indoor Unit LineupVRV Indoor Units

If people do not return, the

air conditioner will raise the

temperature 1� every 30

minutes and then operate

at 30�.

The system automatically saves energy by

detecting whether or not the room is occupied. The

set temperature is shifted automatically if the room

is unoccupied.

The system automatically saves energy by detecting whether or

not the room is occupied.

Based on preset user conditions, the system automatically stops

operation if the room is unoccupied.

Example• Cooling setpoint: 26� • Shift temperature: 1.0� • Shift time:30 min. • Limit cooling temperature:30�

Airf low block function prevents uncomfortable drafts by reducing air veloci ty toapprox. 0.3m/s.*2

The system automatically saves energy by detecting

whether or not the room is occupied. The set temperature

is shifted automatically if the room is unoccupied.

Airflow block function prevents uncomfortable drafts by

reducing air velocity.

It can be set using the BRC1E62 remote controller. There is

no need for sealing material of air discharge outlet (option).

This function only works when all-round flow is used. It cannot

be used when sealing material is used in the air discharge

outlet (option).

*1.These functions are not available when using the group control system.*2.User can set these functions with remote controller.*3.Please note that upon re-entering the room, air conditioner will not switch on automatically.

*1. Works in one direction only.*2. In case of FXFQ63S type (Data is based on Daikin research.) When using FXFQ80S type or higher, if the airflow rate is set to High, airflow will be on the high side.

Under actual conditions, however, the airflow value may differ depending on the effect of surrounding conditions and the way in which the temperature was adjusted.*3. A gap of 1500 mm is required if the air block function is not used.

Individual airflow setting

Airflow direction of each of the four air outlets can be controlled individually.(Positions 0 to 4, Swing, Blocked, and No individual setting are selectable.)

Airflow block function*1

Total comfort by individual airflow direction control and “airflow block function”

Sensing sensor low mode (default: OFF)

When there are no people in a room,

the set temperature is shifted automatically.

Sensing sensor stop mode (default: OFF)

When there are no people in a room, the system stops automatically.* 3

Horizontal flow Airflow block

Easy setup with remote controller

Sensing sensor mode**

Individual airflow direction controlCeiling Mounted Cassette (Round Flow with Sensing) Type

Operation is reduced in placeswhere there are no people.

2827

26

Occupied

Unoccupied

Automaticallyreverts whenpeople return.

27� 28�

26�26� 26�26�

27� 28�

S e t p o i n t ( � )

TimeAfter 30 min After another 30 min

Absent stop time can be selected from 1 to 24 hrs in 1 hr incrementswith remote controller.

Shift temperature and time can be selected from 0.5 to 4� in 0.5� increments and 15, 30, 45, 60, 90 or 120 minutesrespectively with remote controller.

Airflow blockair velocityapprox. 0.3m/s*1

500mm

Wall

Airflowblock

*3

Also can supportsuch case

Airflow blockfor cabinet side

The airflow block functionis useful when rearrangingthe room layout.

1

2

3

4 Outlet mark

1 Blocked

3 Position 24 Swing

2No individualsetting(Auto direction)

Example

Swing Position 2

blocked

No ind. set

A


10/34


11/3419 20

Thin, lightweight, and easy to install in

narrow ceiling spaces

305 mm

The thin unit (only 305 mm high) can be installed in a

ceiling space as narrow as 350 mm. All models feature a

compact design with a depth of only 600 mm.

(When a high-efficiency filter is attached, the unit's height is

400 mm.)

Designed with higher airflow suitable for high ceiling

application up to 3 metres.

Providing 2 different settings of standard and ceiling soiling

prevention, the auto swing mechanism realises even

distribution of airflow and room temperature.

Two types of optional high-efficiency filter are available

(65% and 95%, colourimetric method).

A long-life filter (maintenance free up to one year*) is

equipped as standard accessory.* 8 hr/day, 25 day/month. For dust concentration of 0.15 mg/m3

Major maintenance work can be performed by removing

the panel. A flat-type suction grille and a detachable

blade make cleaning easy.

FXCQ20M / FXCQ25M / FXCQ32M

FXCQ40M / FXCQ50M / FXCQ63M

FXCQ80M / FXCQ125M

Drain pump is equipped as standard accessory with

600 mm lift.

600 mm

(220 V)(dB(A))Low operation sound level

FXCQ-M 20

32/27

25/32

34/28

63

37/32

40/50

34/29

80

39/34

125

44/38Sound level

(H/L)

Ceiling Mounted Cassette (Double Flow) Type


Ceiling Mounted Cassette Corner Type

Slim design for flexible installation

Main body

Air discharge grille(Option)

Set for front discharge using a suspended ceiling.

Downward discharge is shut off and air is blown straight out(front discharge).

Front discharge is possible with an air discharge

unit (option), which allows the installation in the

drop-ceiling or sagging wall.

Single-flow type allows effective air discharge

from corner or from drop-ceiling.

Providing 3 different settings of standard, draft

prevention and ceiling soiling prevention, the

auto swing mechanism realises even distribution

of airflow and room temperature.

Main body

Downward discharge

Air discharge grille (Option)

3

32˚C 30˚C

28 C̊ 26 C̊24˚C

22˚C

20˚C

2

1

0 1 2 3 4 5 6 (m)

(m)

500 mm

Drain pump is equipped as standard

accessory with 500 mm lift.

Panel spacer

20 mm

Min.195 mm

Slim body needs only 220 mm space above the

ceiling. If you use a panel spacer (option), the

unit can be installed in the minimum space of

195 mm.

A long-life filter (maintenance free up to one

year*) is equipped as standard accessory.* 8 hr/day, 25 day/month. For dust concentration of 0.15 mg/m 3

FXKQ25MA / FXKQ32MA

FXKQ40MA / FXKQ63MA


12/3421 22

Slim design, quietness and

static pressure switching

Only 200 mm in height, this model can be installed in

rooms with as little as 240 mm in height for the ceiling

space between the drop-ceiling and ceiling slab.

Only 700 mm in width and 23 kg in weight, this

model is suitable to install in limited spaces like

drop-ceilings in hotels.

* The values of operation sound level represent those for rear-suction operation.

Sound level values for bottom-suction operation can be obtained by adding 5 dB(A).* Values are based on the following conditions:

FXDQ-PB: external static pressure of 10 Pa; FXDQ-NB: external static pressure

of 15 Pa.

* 1,100 mm in width for the FXDQ63NB model.

200 mm900 mm

Suction grille *AIR

AIR

Discharge grille *

Air filterSuspension bolt*

240 mm

* To be obtained locally

Only 700 mm200 mm

Great for

hotel use!

Suited to use in drop-ceilings!

Control of the airflow rate has been improved from 2-step

to 3-step control.

FXDQ20PB / FXDQ25PB / FXDQ32PB FXDQ40NB / FXDQ50NB / FXDQ63NB

Low operation sound level (dB (A))

External static pressure selectable by remote controllerswitching make this indoor unit a very comfortable andflexible model.

10 Pa-30 Pa/factory set: 10 Pa for FXDQ-PB models.15 Pa-44 Pa/factory set: 15 Pa for FXDQ-NB models.

FXDQ-PB and FXDQ-NB models are available in twotypes to suit different installation conditions.

FXDQ-PB/NBVE: with a drain pump (750 mm lift)as a standard accessory

FXDQ-PB/NBVET: without a drain pump

Slim Ceiling Mounted Duct Type (Standard Series)

33/31/29

6363

33/30/27

50

30/28/26

40

28/26/23

20/25

Sound level(HH/H/L)

FXDQ-PB/NB

28/26/24

32


750 mm

Ceiling

FXDQ20SP / FXDQ25SP

FXDQ32SP / FXDQ40SPFXDQ50SP / FXDQ63SP

Slim and compact design for easy and flexible installation

It is available in two types – ceiling r eturn and ordinary

duct to suit different installation conditions.

Duct

Air

discharge

Air suction

Duct

Canvas bellowsand air suctionpanel

Air

discharge

Air suction

750 mm

Ceiling

Drain pump is equipped

as standard accessory

with 750 mm lift.

200 mm

Only 450 mm

Slim Ceiling Mounted Duct Type (Compact Series)

It comes with a slim and compact design with a height

of only 200 mm that requires as little as 240 mm in

height for the ceiling space between the drop- ceiling

and ceiling slab. The depth of the product is only 450

mm which is suitable to install in limited spaces.

700 mm**For FXDQ20-32SP models

Side view Top view

240 mmandabove

Ceiling

2 0 0 m

m

Great for

residential use


13/3423 24


Middle external static pressure

and slim design allow flexible installations

Middle Static Pressure Ceiling Mounted Duct Type Indoor Unit

FXSQ20P / FXSQ25P / FXSQ32P

FXSQ40P / FXSQ50P / FXSQ63P

FXSQ80P / FXSQ100PFXSQ125P / FXSQ140P

Installation flexibility

Design flexibility

Comfort

Easy maintenance

Easy installation

850

Ceiling

With a height of only 245 mm, installation is possible

even in buildings with narrow ceiling spaces.

DCdrain pump is

equipped as standard

accessory with850 mm lift.

Air suction direction can be altered from rear tobottom suction.

Bottom suction is possible which facilitates installation

and maintenance. Wiring connections and

maintenance of control box can be done from underthe unit with an optional shield plate for side plate*,

extending the degree of freedom for installation in the

ceiling.

Air suction

JoistAir conditioner

ceiling

Switch bottom platewith air suction flange.

Rear suction

Bottom suction

Shield plate for side plate* (Option)

Ceiling

2 4 5

245

*An optional shield plate for side plate is required if wiring connections andmaintenance of control box are needed from under the unit. This option is onlyavailable for FXSQ20-125P models.

Slim design

Standard DC drain pump

Bottom suction possible

Using a DC fan motor, the external static pressure can

be controlled within a range of 30 Pa* to 150 Pa.

*30 Pa–150 Pa for FXSQ20-40PVE 50 Pa–150 Pa for FXSQ50-125PVE

50 Pa–140 Pa for FXSQ140PVE

Comfortable airflow is achieved in accordance with

conditions such as duct length.

Adjustable external static pressure

30 Pa* 150 Pa

Set to high static pressure for

advanced needs such as when

using dampers and long ducts.

Set to low static

pressure when ducts

are short.

Adjustable external static pressure

Control of the airflow rate can be selected from 3-step

control.

(dB(A))

36/32/29

63

34/32/29

50

36/33/30

40

34/32/30

32

33/30/28

20/25

Sound level(H/M/L)

FXSQ-PVE

43/40/36

140

42/38.5/35

125

39/35/32

100

37.5/34/30

80

Sound level(H/M/L)

FXSQ-PVE

5-step airflow rate is automatically controlled in

accordance with the difference between room

temperature and set temperature.Auto airflow rate control can be selected with wired

remote controller BRC1E62.

Switchable airflow rate

Auto airflow rate


Inspection and cleaning is facilitated by separating the

drain pipe and inspection opening and by thedrain pan maintenance check hole.

Drain pan maintenance check hole

Separate drain pipeand inspection opening

The drain pan can be detached for easy cleaning.

An antibacterial treatment that uses silver ions has been

applied to the drain pan, preventing the growth of slime,mould and bacteria that cause blockages and odours.

During installation, even if the external static pressure

changes due to a change in the duct route, the airflow

can be automatically adjusted to within the unit’s external static pressure range.

Airflow rate can be controlled using a remote

controller during test operation. It is automatically

adjusted to the range between approximately ±10% of the rated H tap airflow.

Airflow rate auto adjustment function


14/3425 26


Middle and high static pressure

allows for flexible duct design

Built-in Drain Pump (Option)Housing the drain pump inside the unit reduces thespace required for installation.

All models are only 300 mm in height, an improvementover the 390 mm height of conventional models. Theweight of the FXMQ40P has been reduced from 44 kgto 28 kg.

A DC fan motor increases the external static pressurecapacity range to include middle to high staticpressures, increasing design flexibility.

Indoor unit

470 mm

Indoor unit

470 mm

0–250mm

222 mm

Without drain pump With drain pump

Simplified Static Pressure ControlExternal static pressure can be easily adjusted using achange-over switch inside the electrical box to meet theresistance in the duct system.

FXMQ200MA/FXMQ250MA

Drain pump is equipped asstandard accessory with700 mm lift.

Control of the airflow rate has been improved from

2-step to 3-step control.

(dB (A))

46/45/43

140

42/40/38

63

43/41/39

80/100

41/39/37

50

39/37/35

40

34/32/30

32

33/31/29

20/25

Soundlevel

(HH/H/L)

FXMQ-P

700 mm

Ceiling

30 Pa–100 Pa for FXMQ20P-32P30 Pa–160 Pa for FXMQ40P50 Pa–200 Pa for FXMQ50P-125P50 Pa–140 Pa for FXMQ140P


Improved ease of installation

Improved ease of maintenance

Airflow rate can be controlled using a remote controller

during test operation. With the conventional model, the

airflow rate was controlled from the PC board. It is

automatically adjusted to the range between approximately

±10% of the rated HH tap airflow for FXMQ20P–125P.

The drain pan can be detached for easy cleaning. An

antibacterial treatment that uses silver ions has been

applied to the drain pan, preventing the growth of slime,

mould and bacteria that cause blockages and odours.

Energy-efficient

The adopted DC fan motor is much more efficient than

the conventional AC motor, yielding an approximate

20% decrease in energy consumption (FXMQ125P).

25 mm

44/42/40

125

FXMQ20P / FXMQ25P / FXMQ32P



FXMQ140P


This slim and stylish indoor unit achieves

optimum air distribution, and can be installed

without the need for ceiling cavity.

Unit body and suction panel

adopted round shapes andrealised a slim appearancedesign. The unit can be used

for various locations such asthe ceilings with no cavity andbare ceilings.

Flaps close automatically whenthe unit stops, which gives asimple appearance.

Unified slim height of 198 mmfor all models that gives the

unified impression even whenmodels with different capacitiesare installed in the same area.

Built-in electronic expansion valve eliminates the needfor a BEV unit, which improves flexibility of installation.

With adoption of the individual flap control, airflowdirection adjustment can be individually set for each airoutlet. 5 directions of airflow and auto-swing can be

selected with wired remote controller BRC1E62, whichrealises the optimum air distribution.

Control of the airflow rate has been improved from2-step to 3-step control. Auto airflow rate control canbe selected with wired remote controller BRC1E62.

Energy efficiency has been improved thanks to theadoption of a new heat exchanger with smallertubes, DC fan motor and DC drain pump motor.

Drain pump is equipped as a standard accessory, and thelift height has been improved from 500 mm to 600 mm.

Depending on installation site requirements or roomconditions, 2-way, 3-way and 4-way dischargepatterns are available.

4-way flow 3-way flow

L-shaped 2-way flow

198 mm

BEV unitisnotneeded

BEV unit isneeded

Current model New model

Position 0 Position 2

Position 3 Swing

Individual airflow direction example case

FXUQ71A / FXUQ100A

4-Way Flow Ceiling Suspended Type


15/3427 28


Stylish flat panel design harmonised

with your interior décor

Drain pan and air filter can be kept clean by mould-proof

polystyrene.

Vertical auto-swing realises efficiency of air distribution.

The louvre closes automatically when the unit stops.

5 steps of discharge angle can be set by remote

controller.

Discharge angle is automatically set at the same angle

as the previous operation when restarting. (Initial setting:10° for cooling and 70° for heating)

Flexible installation

Drain pipe can be fitted to from either left or

right sides.

Stylish flat panel design creates a graceful harmony that

enhances any interior space.

Flat panel can be cleaned with only the single pass of a

cloth across their smooth surface.

Flat panel can also be easily removed and washed for

more thorough cleaning.

Drain pump kit is available as optional accessory, which

lifts the drain 1,000 mm from the bottom of the unit.

Drain pump kit

1,000 mm

Height of drain-up

Indoor unit

FXAQ20P / FXAQ25P

FXAQ32P / FXAQ40PFXAQ50P / FXAQ63P

Low operation sound level(dB(A))

47/4147/41

6363

42/3742/37

5050

39/3439/34

4040

38/3138/31

3232

36/3136/31

2525

35/3135/31

2020

Sound level(H/L)

Sound level(H/L)

FXAQ-PFXAQ-P

Wall Mounted TypeCeiling Suspended Type

Slim body with quiet and wide airflow

Adoption of QUIET STREAM FAN

Drain pump kit (option) can be easily incorporated.

Easy-to-clean flat design

Maintenance is easier because everything can be

performed from below the unit.

Non-dew Flap with no implanted bristles

Uses the quiet stream fan and manymore advanced technologies.

Sound absorptionmember

Turbulent flow is produced

Straightening vane

Quiet stream fan

Installation is easy

Maintenance is easy

Drain pump kit

(built inside main unit)

600 mm

Bristle-free Flap minimisescontamination and makescleaning simpler.

Non-dew Flap

100°

Wide air discharge openings produce a spreading 100°

airflow.


equipped as standard accessory.* 8 hr/day, 25 day/month. For dust concentration of 0.15 mg/m 3

FXHQ32MA / FXHQ63MA

FXHQ100MA

FXHQ-MA

Sound level(H/L)

Sound level(H/L)

3232

36/3136/31

6363

39/3439/34

100100

45/3745/37

(dB(A))Low operation sound level


16/3429 30


FXVQ125N / FXVQ200N

FXVQ250N

Large airflow type for large spaces.Flexible interior design for each tenant.

Large airflow type that fits for spacious areas such as factoriesand large stores.

Various installations can be supported from full-scale ductconnection airflow to direct airflow that allows for easyinstallation.

Outdoor air intake mode isuseable as an outdoor-airprocessing air conditioner.

*When using the unit as an outdoor-airprocessing unit, there are somerestrictions. Strictly follow the restrictionsspecified in the Engineering Data Book.

All-fresh (using outdoor air only) system Return + Outdoor air mixed system

OutsideAirconditioning

Outdoor airintroduction

Air

conditioning

C i r c ul a t e d a i r

Outdoor airintroduction

Outside

* Air introduced from the outside and circulated air must be mixed in theair conditioner primary side before introduction into the air conditioner.

Adding the plenum chamber (option)allows for simple operation with directairflow.

* Note that the operation sound increases by

approximately 5 dB(A).

Direct airflow type

Full-scale duct connection airflowallows for air conditioning evenly inspacious areas.

Duct connection airflow type

The high static pressure type driven by the belt drivesystem allows for use of air discharge outlets in variousshapes as well as long ducts. Highly flexible installationis possible.

Design with high maintainability that allows majorservices and maintenance services to be performed atthe front.

A long-life filter (maintenance free up to one year*) isequipped as a standard accessory.

* 8 hr/day, 26 day/month. For dust concentration of 0.15 mg/m 3

A wide range of optional accessories are available suchas high-efficiency filters.

Floor Standing Type

Concealed Floor Standing Type

Suitable for perimeter zone air conditioning

Wall hanging Floor installation

Floor Standing types can be hung on the wall for easier

cleaning. Running the piping from the back allows the unit

to be hung on walls. Cleaning under the unit, where dust

tends to accumulate, is considerably easier.


equipped as standard accessory.* 8 hr/day, 25 day/month. For dust concentration of 0.15 mg/m

3

The adoption of a fibre-less discharge grille featuring an

original design to prevent condensation also helps prevent

staining and makes cleaning easier.

Designed to be concealed in the perimeter skirting-wall

Connectingport

Refrigerantpiping

*Appliesalsoto FloorStandingtype(FXLQ-MA).

The unit is concealed in skirting-wall of perimeter, that

enables to create high class interior design.

The connecting port faces downward,

greatly facilitating on-site piping work.

A long-life filter (maintenance free up to

one year*) is equipped as standard

accessory.* 8 hr/day, 25 day/month. For dust concentration of 0.15 mg/m 3

FXNQ20MA / FXNQ25MA

FXNQ32MA / FXNQ40MA

FXNQ50MA / FXNQ63MA

FXLQ20MA / FXLQ25MA

FXLQ32MA / FXLQ40MA

FXLQ50MA / FXLQ63MA



17/3431 32

Indoor Unit LineupResidential Indoor Units with connection to BP units

Wall Mounted Type

3D Airflow3D Airflow combines Vertical and Horizontal Auto-Swing

to reduce indoor temperature fluctuation. This function

circulates air to every part of a room for uniform cooling

or heating of even large spaces. To start 3D Airflow,

push both the Vertical and Horizontal Auto-Swingbuttons. The flaps and louvers swing in turn.

Two-Area Intelligent EyeA combination of Comfort Airflow Mode and Intelligent

Eye directs airflow away from people to avoid drafts. Ifthere is no movement in a room for 20 minutes,

Intelligent Eye automatically adjusts the set

temperature by approximately 2°C to save energy.

Area 2Area 1

If a person is detected in area 1, airflow is

directed away from him/her.

Area 2Area 1

If a person is detected in area 2, airflow isdirected away from him/her.

Elegant Appearance with Curved Panel

The sleek design of the FTKJ-N indoor unit featuresa uniquely European style. This elegant body

houses state-of-the-art technology which delivers

superior performance. The FTKJ-N series offers a

versatile choice for home-owners, designers and

architects alike.

Comfort Airflow Mode

Comfort Airflow Mode prevents uncomfortable draftsfrom blowing directly on to a person’s body. During

cooling operation, the flap moves upwards to prevent

cold drafts. During heating operation, the flap turns

vertically downwards to drive warm air to the floor.

The flaps and louvers swing in turn,expanding the comfort zone.

FTKJ25N / FTKJ35N / FTKJ50N

Standardaccessory

Elegant appearance with European styleSlim and smooth design suits your shallow ceiling

Signals from the wireless remote controller aretransmitted to the signal receiver.

240 mm

Home Leave Operation prevents large rises or falls in

the indoor temperature by continuing operation* while

you are sleeping or out of your home. This means that

an air-conditioned welcome awaits when you wake or

return. It also means that the indoor temperature can

quickly return to your favourite comfort setting.

Notes:1. To prevent an increase in operation noise, avoid installing the air suction grille

directly below the suction chamber.2. Grilles, piping connections, ducts, and installation parts should be obtained

locally. Slim Ceiling Mounted Duct type models do not have drain-up pumps.3. The signal receiver unit must be located near the air suction inlet, because the

unit includes a sensor that detects room temperature.

* Locally obtained partsAIR

Air suctiongrille*

Suction duct*

Signalreceiver

Air discharge duct* Suspension bolt*

Air discharge grille*

Signal receiver wireLength = 1,900 mm

Chamber

AIR

Air filter

* Home Leave Operation can be selected for any temperature from 18 to32˚C for cooling operation and 10 to 30˚C for heating operation.

* Home Leave Operation function must be set using the remote controllerwhen going to sleep or leaving the house, and after waking up or returninghome.


Standard accessoryNote: Remote controllersother than the standardaccessory wireless remotecontroller cannot be used.

700 mm width type

900/1,1000 mm width typeFDKS25EA / FDKS35EA

FDKS25CA / FDKS35CAFDKS50C / FDKS60C

200 mm

Only 700 mm

FDKS-EA

Dimensions (H x W x D)

Weight

Airflow rate (H)

External static pressure

200 x 700 x 620 mm

21 kg

8.7 m3 /min

30 Pa

200 x 900 x 620 mm

25 kg

40 Pa

FDKS25EA FDKS35EA FDKS25CA FDKS35CA

9.5 m3 /min 10 m3 /min

Models in the FDKS-EA series are only 700 mm

in width and 21 kg in weight, so are easilyinstalled in limited spaces. Just 200 mm in height,

all models can be installed in rooms with as little

as 240 mm depth between the drop ceiling and

ceiling slab, making them ideal for even shallow

ceilings.

Great for

hotel use!

FDKS25

35/31/ 29 dB (A)

FDKS35

35/31/ 29 dB (A)

FDKS50

37/33/ 31 dB (A)

FDKS60

38/34/ 32 dB (A)

(H/L/ SL)Low operation sound level

Note: Remote controllers other than the standard accessory wireless remote controller cannot be used.


18/34

SpecificationsIndoor Unit LineupResidential Indoor Units with connection to BP units

33 34

VRV Indoor Units

Note: Specifications are based on the following conditions;•Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.•Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index.(See Engineering Data Book for details.)

•Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.During actual operation, these values are normally somewhat higher as a result of ambient conditions.

Ceiling Mounted Cassette (Round Flow with Sensing) Type

Fresh white

50×950×950

5.5

19

246×840×840

Galvanised steel plate

1-phase, 220-240 V/220-230 V, 50/60 Hz

441/406/353

30/28.5/27

12.5/11.5/10.0

0.031

2.8

9,600

2,400

FXFQ25SVM

441/406/353

30/28.5/27

12.5/11.5/10.0

0.031

3.6

12,300

3,100

FXFQ32SVM

512/459/388

31/29/27

14.5/13.0/11.0

0.041

4.5

15,400

3,900

FXFQ40SVM

23

777/618/477

36/32/28

22.0/17.5/13.5

0.080

5.6

19,100

4,800

FXFQ50SVM

BYCQ125B-W1

6.4

12.7

VP25 (External Dia, 32/Internal Dia, 25)

cfm

dB(A)

mm

kg

mm

mm

kg

kcal/h

Btu/h

kW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Model

Colour

Dimensions(H×W×D)

Weight

Power consumption

Casing

Sound level (H/M/L)

Airflow rate (H/M/L)

Dimensions (H×W×D)

Machine weight

Pipingconnections

Panel(Option)

Power supply

Cooling capacity

MODEL

Cooling

Fresh white

50×950×950

5.5

246×840×840 288×840×840


1-phase, 220-240 V/220-230 V, 50/60 Hz

23

BYCQ125B-W1


15.9

9.5

7.1

24,200

6,100

FXFQ63SVM

830/653/477

38/33/28

23.5/18.5/13.5

0.095

11.2

38,200

9,600

FXFQ100SVM

1,165/918/671

44/38/32

33.0/26.0/19.0

0.194

9.0

30,700

7,700

FXFQ80SVM

830/688/530

38/35/31

23.5/19.5/15.0

0.095

14.0

47,800

12,000

FXFQ125SVM

1,218/971/741

45/40/35

34.5/27.5/21.0

0.219

26

cfm

dB(A)

mm

kg

mm

mm

kg

kcal/h

Btu/h

kW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Model

Colour

Dimensions(H×W×D)

Weight

Power consumption

Casing

Sound level (H/M/L)



Machine weight

Pipingconnections

Panel(Option)

Power supply

Cooling capacity

MODEL

Cooling

Wall Mounted Type

Intelligent Eye with its infrared sensor

automatically controls air conditioner operation

according to human movement in a room. When

there is no movement, it adjusts the temperature

by 2˚C for energy savings.

3-D Airflow

combines Vertical

and Horizontal

Auto-Swing to

circulate air to every

part of a room for

uniform cooling of even

large spaces.* This function is available for

FTKS50/60/71F.

FTKS25D

37/25/ 22 dB (A)

FTKS35D

39/26/ 23 dB (A)

FTKS50F

43/34/ 31 dB (A)

FTKS60F

45/36/ 33 dB (A)

FTKS71F

46/37/ 34 dB (A)

(H/L/ SL)

Wh en yo u ar e i n t he r oo m Wh en yo u g o o ut

A uniform temperatureis achieved throughoutthe entire room.

Stylish flat panel harmonises with your interior décor

* Remote controllers other than the standard accessory wireless remote controller cannot be used.

Standard accessory*

Standard accessory*

Standard accessory*

FTKS25D / FTKS35D

FTKS50B

FTKS50F / FTKS60F / FTKS71F

Wall Mounted indoor units achieve quiet sound

levels of 22 dB (A).

Titanium apatite is a photocatalytic material with

high adsorption power. Titanium apatite also

effectively adsorbs and decomposes bacteria

across its entire surface. The photocatalyst is

activated simply by exposure to light.

These filters are not medical devices. Benefits

such as the adsorption and decomposition of

bacteria are only effective for substances that are

collected on and in direct contact with the Titanium

Apatite Photocatalytic Air-Purifying Filter.

Bacteria Removal Test

Testing method: dropping method

Result certificate: No. 012553-1 and 012553-2

Testing organisation: Japan Spinners Inspecting Foundation

Titanium ApatitePhotocatalyticAir-purifying Filter

Air filterCatches dust


19/34

Specifications

35 36

VRV Indoor Units

Ceiling Mounted Cassette (Double Flow) Type

Ceiling Mounted Cassette Corner Type

FXCQ20MVE FXCQ25MVE FXC Q32MVE FXCQ40MVE FXCQ50MVE FXCQ63MVE FXCQ80MVE FXCQ125MVE

1-phase, 220-240 V/220 V, 50/60 Hz

1,900 2,400 3,100 3,900 4,800 6,100 7,700 12,000

7,500 9,600 12,300 15,400 19,100 24,200 30,700 47,800

2.2 2.8 3.6 4.5 5.6 7.1 9.0 14.0

0.077 0.092 0.092 0.130 0.130 0.161 0.209 0.256


7/5 9/6.5 9/6.5 12/9 12/9 16.5/13 26/21 33/25

2 47 /1 77 3 18 /2 30 3 18 /2 30 4 24 /3 18 4 24 /3 18 5 82 /4 59 9 18 /7 41 1 ,1 65 /8 83

32/27 34/28 34/28 34/29 34/29 37/32 39/34 44/38

305×775×600 305×775×600 305×775×600 305×990×600 305×990×600 305×1,175×600 305×1,665×600 305×1,665×600

26.0 26.0 26.0 31.0 32.0 35.0 47.0 48.0

6.4 6.4 6.4 6.4 6.4 9.5 9.5 9.5

12.7 12.7 12.7 12.7 12.7 15.9 15.9 15.9


BYBC32G-W1 BYBC50G-W1 BYBC63G-W1 BYBC125G-W1

White (10Y9/0.5)

53×1,030×680 53×1,030×680 53×1,030×680 53×1,245×680 53×1,245×680 53×1,430×680 53×1,920×680 53×1,920×680

8.0 8.0 8.0 8.5 8.5 9.5 12.0 12.0

cfm

dB(A)

mm

kg

mm

mm

kg

kcal/h

Btu/h

kW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Model

Colour

Dimensions(H×W×D)

Weight

Power consumption

Casing

Sound level (H/L)


Machine weight

Pipingconnections

Panel(Option)

Power supply

Cooling capacity

MODEL

Cooling

Airflow rate (HH/M/L)

220 V

240 V

FXKQ25MAVE

9,600

2,400


11/9

FXKQ32MAVE

12,300

3,100

FXKQ40MAVE

15,400

3,900

FXKQ63MAVE

2.8 3.6 4.5 7.1

24,200

6,100

11/9 13/10 18/15

388/318 388/318 459/353 635/530

215X1,110X710

31

6.4

12.7


BYK45FJW1

White (10Y9/0.5)

70X1,240X800

8.5

215X1,110X710

31

6.4

12.7

70X1,240X800

8.5

215X1,110X710

31

6.4

12.7

70X1,240X800

8.5

215X1,310X710

34

9.5

15.9

BYK71FJW1

70X1,440X800

9.5

38/33 38/33 40/34 42/37

1-phase, 220-240 V/220 V, 50/60 Hz

Note: Specifications are based on the following conditions;•Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.•Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)•Sound level: (FXCQ-M) Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.

(FXKQ-MA) Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward.During actual operation, these values are normally somewhat higher as a result of ambient conditions.

0.066 0.066 0.076 0.105

cfm

mm

kg

mm

mm

kg

kcal/h

Btu/h

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Model

Colour

Dimensions(H×W×D)

Weight

Power consumption

Casing

Sound level (H/L)


Machine weight

Pipingconnections

Panel(Option)

Power supply

Cooling capacity

MODEL

Cooling

kW

220 V

240 VdB(A)

Airflow rate (H/L)

Ceiling Mounted Cassette (Compact Multi Flow) Type

1-phase, 220-240 V/220 V, 50/60 Hz

1,900

7,500

2.2

2,400

9,600

2.8

3,100

12,300

3.6

0.076

3,900

15,400

4.5

0.089

4,800

19,100

5.6

0.115


9/7 9.5/7.5 11/8 14/10

318/247 335/265 388/282 493/353

30/25-32/26 32/26-34/28 36/28-37/29 41/33-42/35

286×575×575

18

6.4

12.7


BYFQ60B3W1

White (6.5Y9.5/0.5)

55×700×700

2.7

F XZ Q2 0M VE F XZ Q2 5M VE F XZ Q3 2M VE F XZ Q5 0M VEFXZQ40MVE

0.073

cfm

dB(A)

mm

kg

mm

mm

kg

kcal/h

Btu/h

kW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Model

Colour

Dimensions(H×W×D)

Weight

Casing


Machine weight

Pipingconnections

Panel(Option)

Power supply

Cooling capacity

MODEL

Cooling

Airflow rate (H/L)

Sound level(H/L)

230 V, 50 Hz-240 V, 50 Hz

Power consumption

34/29 36/30 36/30 37/32 37/32 39/34 41/36 46/40

40/35 40/35 42/36 44/39

Ceiling Mounted Cassette (Round Flow) Type

1-phase, 220-240 V, 50 Hz

2,400

9,600

2.8

0.033

3,100

12,300

3.6

0.033

3,900

15,400

4.5

0.047

4,800

19,100

5.6

0.052

13/11.5/10

459/406/353

30/28.5/27

15/13/11

530/459/388

31/29/27

16/13.5/11

565/477/388

32/29.5/27

FXFQ25LUV1 FXFQ32LUV1 FXFQ40LUV1 FXFQ50LUV1


6,100 7,700 9,600 12,000

24,200 30,700 38,200 47,800

7.1 9.0 11.2 14.0

0.066 0.093 0.187 0.209

19/16.5/13.5

671/583/477

34/31/28

32/26/20

1,130/918/706

43/37.5/32

33/28/22.5

1,165/989/794

44/39/34

21/18/15

742/636/530

36/33.5/31

FXFQ63LUV1 FXFQ80LUV1 FXFQ100LUV1 FXFQ125LUV1

9.5

15.9


BYCP125K-W1

Fresh white

50X950X950

5.5

6.4

12.7

13/11.5/10

459/406/353

30/28.5/27

cfm

dB(A)

mm

kg

mm

mm

kg

kcal/h

Btu/h

kW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Model

Colour

Dimensions(H×W×D)

Weight

Casing

Sound level (HH/H/L)


Machine weight

Pipingconnections

Panel(Option)

Power supply

Cooling capacity

MODEL

Cooling

Airflow rate (HH/H/L)

22 25

246X840X840 288X840X840

19.5

Power consumption

Note: Specifications are based on the following conditions;•Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.•Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index.(See Engineering Data Book for details.)•Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.

During actual operation, these values are normally somewhat higher as a result of ambient conditions.


20/34

Specifications

37 38

VRV Indoor Units

Middle Static Pressure Ceiling Mounted Duct Type

Note: Specifications are based on the following conditions;•Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.

•Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index.(See Engineering Data Book for details.)


1: Power consumption value is the value when airflow rate is maximum at maximum external static pressure position. 2: External static pressure can be modified using a remote controller that offers thirteen (FXSQ20-40P), eleven (FXSQ50-125P)

or ten (FXSQ140P) levels of control. These values indicate the lowest and highest possible static pressures. The rated staticpressure is 50 Pa.

15,4003,900

530/441/371

19,1004,800

600/512/406

4.5 5.6

15/12 .5 /10.5 17/14 .5 /11.5

11111

11111

7,5001,900

318/265/230

2.2

9/7.5/6.5

9,6002,400

318/265/230

2.8

9/7.5/6.5

12,3003,100

335/282/247

3.6

6.4

12.7

9.5/8/7


24,200

6,100

741/618/512

30,700

7,700

812/688/565

38,200

9,600

1,130/953/794

9.5

15.9

47,800

12,000

1,306/1,112/918

7.1 9.0 11.2 14.0

21/ 17.5/14.5 23/19.5/16 32/27/22.5 37/ 31. 5/26

36/32/29 37.5/34/30 39/35/32 42/38.5/35

54,600

13,800

1,377/1,183/988

16.0

39/33.5/28

43/40/36

F XSQ 20 PVE F XSQ 25 PVE F XS Q3 2P VE F XSQ 40 PV E F XS Q5 0P VE

0.104

0.222 0.230 0.331 0.360 0.411

0.104 0.111 0.162 0.164

245X1,000X800245X700X800245X550X800

352725

34/32/2936/33/3034/32/3033/30/28

cfm

Pa

dB(A)

mm

kg

mm

kcal/hBtu/h

kW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Power consumption

Casing


Machine weight

Pipingconnections

Power supply

Cooling capacity

MODEL

Cooling


Sound level (H/M/L)

cfm

Pa

dB(A)

mm

kg

mm

kcal/h

Btu/h

kW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Power consumption

Casing


Machine weight

Pipingconnections

Power supply

Cooling capacity

MODEL F XSQ63PVE F XSQ80PVE FXSQ100PVE

1-phase, 220-240 V/220 V, 50/60 Hz


245X1,400X800

4637

245X1,000X800

35 47

245X1,550X800

52

FXSQ125PVE FXSQ140PVE

Cooling


Sound level (H/M/L)



230-150 (50) 250-150 (50)

250-150 (50) 250-140 (50)

1-phase, 220-240 V/220 V, 50/60 Hz



Slim Ceiling Mounted Duct Type (Standard Series)

Slim Ceiling Mounted Duct Type (Compact Series)

Note: Specifications are based on the following conditions;•Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 5.0 m, Level difference: 0 m.•Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)•Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.

During actual operation, these values are normally somewhat higher as a result of ambient conditions.1 : Values are based on the following conditions: FXDQ20-32SP: external static pressure of 10 Pa; FXDQ40-63SP: external static pressure of 20 Pa.2 : External static pressure is changeable to set by the remote controller. This pressure means “High static pressure - Standard”. (Factorysetting is 10

Pa for FXDQ20-32SP models and 20 Pa for FXDQ40-63SP models.)3 : The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be obtained by adding 5 dB(A).

FXDQ20SPV1 FXDQ25SPV1 FXDQ32SPV1 FXDQ40SPV1 FXDQ50SPV1 FXDQ63SPV1

2


1-phase, 220-240 V, 50 Hz

1,900

7,500

2.2

0.072

2,400

9,600

2.8

0.075

3,100

12,300

3.6

0.078

3,900

15,400

4.5

0.180

4,800

19,100

5.6

0.180

6,100

24,200

7.1

0.196

9.0/8.0/7.0

318/282/247

30-10

8.7/7.6/6.5

307/268/229

10.0/9.0/8.0

353/318/282

2

15.0/13.0/10.5

530/459/371

50-20

35/33/31

200×900×450

20

2

33/31/29

200×700×450

17


34/32/30

cfm

Pa

dB(A)

mm

kg

mm

kcal/h

Btu/h

kW

kW

Liquid (Flare)

Gas (Flare)

Drain

Casing


Machine weight

Pipingconnections

Power supply

Cooling capacity

MODEL

Cooling



Airflow rate (HH/H/L)m3/min

Power consumption 1

6.4

12.7

20.0/16.0/12.5

706/565/441

40-20

37/35/33

200×1,100×450

23

9.5

15.9

1 3

700 mm width type

900/1,100 mmwidth type

FXDQ20PBVE FXDQ25PBVE FXDQ32PBVE

FXDQ20PBVET FXDQ25PBVET FXDQ32PBVET

FXDQ40NBVE

FXDQ40NBVET

FXDQ50NBVE

FXDQ50NBVET

FXDQ63NBVE

FXDQ63NBVET

1-phase, 220-240 V/220 V, 50/60 Hz1,900

7,500

2.2

2,400 3,100

12,300

3.6

9,600

2.8

0.086


8 .0 /7 .2 /6 .4 8 .0 /7 .2 /6 .4 8 .0 /7 .2 /6 .4

282/254/226 282/254/226 282/254/226

28/26/23 28/26/24

200×700×620 200×700×620 200×700×620

23.0 23.0 23.0


Note: Specifications are based on the following conditions;•Cooling: Indoor temp.: 27�DB, 19�WB, Outdoor temp.: 35�DB, Equivalent piping length: 7.5 m, Level difference: 0 m.

•Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)•Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.During actual operation, these values are normally somewhat higher as a result of ambient conditions.

1 : Values are based on the following conditions: FXDQ-PB: external static pressure of 10 Pa; FXDQ-NB: external static pressure of 15 Pa.2 : External static pressure is changeable to set by the remote controller. This pressure means "High static pressure - Standard". (Factory setting is

10 Pa for FXDQ-PB models and 15 Pa for FXDQ-NB models.)3 : The values of operation sound level represent those for rear-suction operation. Sound level values for bottom-suction operation can be obtained by adding 5 dB(A).

3,900 4,800 6,100

15,400 19,100 24,200

4.5 5.6 7.1

10.5/9.5/8.5 12.5/11.0/10.0 16.5/14.5/13.0

371/335/300 441/388/353 583/512/459

30/28/26 33/30/27 33/31/29

200×900×620 200×900×620 200×1,100×620

27.0 28.0 31.0

cfm

Pa

dB(A)

mm

kg

mm

kcal/h

Btu/h

kW

kW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Power consumption(FXDQ-PBVET)

Power consumption(FXDQ-PBVE)

Casing


Machine weight

Pipingconnections

Power supply

Cooling capacity

MODEL

Cooling

Cooling

with drain pump

without drain pump




1 3

30-10 2

1

1

44-15 2

6.4 6.4 6.4

12.712.712.7

6.4

12.7 12.7 15.9

6.4 9.5

0.067 0.152 0.168

0.165 0.181

0.1470.0700.067

0.1470.0700.067


21/34

Specifications

39 40

VRV Indoor Units


• Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.

• Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index.(See Engineering Data Book for details.)

• Sound level: (FXMQ-MA) Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.(FXUQ-A) Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward.

During actual operation, these values are normally somewhat higher as a result of ambient conditions 1: Power consumption values are based on conditions of standard external static pressure. 2: External static pressure is changeable to change over the connectors inside electrical box, this pressure means "Standard-High static pressure".

FXMQ200MAVE FXMQ250MAVE

76,40019,300

22.4 28.0

95,50024,100

1-phase, 220-240 V/220 V, 50/60 Hz


58/50

2,047/1,765

470X1,380X1,100

137

9.5

19.1

PS1B

72/62

2,542/2,189

470X1,380X1,100

137

9.5

22.2

132-221 191-2702 2

48/45 48/45

49/46 49/46

1.294 1.465

cfm

Pa

mm

kg

mm

kcal/hBtu/h

kW

kW

m3/min

Liquid (Flare)

Gas (Brazing)

Drain

Power consumption

Casing


Machine weight

Pipingconnections

Power supply

Cooling capacity

MODEL

Cooling


Sound level(H/L)220 V

240 VdB(A)

Airflow rate (H/L)


Note: Specifications are based on the following conditions;•Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.•Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index.(See Engineering Data Book for details.)


1: Power consumption values are based on conditions of rated external static pressure. 2: External static pressure can be modified using a remote controller that offers seven (FXMQ20-32P), thirteen (FXMQ40P), fourteen (FXMQ50-

125P) or ten (FXMQ140P) levels of control. These values indicate the lowest and highest possible static pressures. The standard staticpressure is 50 Pa for FXMQ20-32P and 100 Pa for FXMQ40-140P.

15,400

3,900

565/459/388

19,100

4,800

635/582/530

4.5 5.6

6.4

12.7

6.4

12.7

16/13/11 18/16.5/ 15

11111

11111

7,500

1,900

318/265/230

2.2

6.4

12.7

9/7.5/6.5

9,600

2,400

318/265/230

2.8

6.4

12.7

9/7.5/6.5

12,300

3,100

335/282/247

3.6

6.4

12.7

9.5/8/7


24,200

6,100

688/618/565

9.5

15.9

30,700

7,700

883/794/706

9.5

15.9

38,200

9,600

1,130/953/812

9.5

15.9

47,800

12,000

1,377/1,165/988

9.5

15.9

7.1 9.0 11.2 14.0

19.5/17.5/16 25/22.5/20 32/27/23 39/33/28

42/40/38 43/41/39 43/41/39 44/42/40

54,600

13,800

1,624/1,377/1,130

9.5

15.9

16.0

46/39/32

46/45/43

F XM Q2 0P VE F XM Q2 5P VE F XM Q3 2P VE F XM Q4 0P VE F XM Q5 0P VE

0.056

0.138 0.185 0.215 0.284 0.405

0.056 0.060 0.151 0.128

300X1,000X700300X700X700300X550X700300X550X700300X550X700

3628252525

41/39/3739/37/3534/32/3033/31/2933/31/29

cfm

Pa

dB(A)

mm

kg

mm

kcal/h

Btu/h

kW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Power consumption

Casing


Machine weight

Pipingconnections

Power supply

Cooling capacity

MODEL

Cooling



cfm

Pa

dB(A)

mm

kg

mm

kcal/h

Btu/hkW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Power consumption

Casing


Machine weight

Pipingconnections

Power supply

Cooling capacity

MODEL F XMQ63PVE F XM Q80PVE FXMQ100PVE

1-phase, 220-240 V/220 V, 50/60 Hz


300X1,400X700

46

300X1,000X700

36

300X1,000X700

36

300X1,400X700

46

300X1,400X700

47

FXMQ125PVE FXMQ140PVE

Cooling





230-100 (50) 230-100 (50) 230-100 (50) 230-160 (100) 250-200 (100)

250-200 (100)250-200 (100)250-200 (100)250-200 (100) 250-140 (100)

1-phase, 220-240 V/220 V, 50/60 Hz



1 1

4-Way Flow Ceiling Suspended Type

1-phase, 220-240 V/220-230 V, 50/60 Hz

6,900 9,600

27,300 38,200

8.0

0.090

11.2

0.200

Fresh white

22.5/19.5/16 31/26/21

794/688/565 1,094/918/741

40/38/36 47/44/40

198×950×950

26 27

9.5

15.9


FXUQ71AVEB FXUQ100AVEB

cfm

dB(A)

mm

kg

mm

kcal/h

Btu/h

kW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Casing

Sound level (H/M/L)


Machine weight

Pipingconnections

Power supply

Cooling capacity

MODEL

Cooling


Power consumption


22/34

Specifications

41 42

VRV Indoor Units

Wall Mounted Type

Floor Standing Type/Concealed Floor Standing Type


FXLQ

FXNQ

•Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.

Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index.(See Engineering Data Book for details.)

•Sound level: Anechoic chamber conversion value, measured at a point 1.5 m in front of the unit at a height of 1.5 m.During actual operation, these values are normally somewhat higher as a result of ambient conditions.

FXAQ20PVE FXAQ25PVE FXAQ32PVE FXAQ40PVE FXAQ50PVE FXAQ63PVE1-phase, 220-240 V/220 V, 50/60 Hz

1,900 2,400 3,100 3,900 4,800 6,100

7,500 9,600 12,300 15,400 19,100 24,200

2.2 2.8 3.6 4.5 5.6 7.1

0.019 0.028 0.030 0.020 0.033 0.050

0.049 0.049 0.090 0.090 0.110 0.110

White (3.0Y8.5/0.5)

7.5/4.5 8/5 8.5/5.5 12/9 15/12 19/14

265/159 282/177 300/194 424/318 530/424 671/494

35/31 36/31 38/31 42/3739/34 47/41

290×795×238 290×795×238 290×795×238 290×1,050×238 290×1,050×238 290×1,050×238

11.0 11.0 11.0 14.0 14.0 14.0

6.4 6.4 6.4 6.4 6.4 9.5

12.7 12.7 12.7 12.7 12.7 15.9


FXLQ50MAVE

FXNQ50MAVE

FXLQ40MAVE

FXNQ40MAVE

FXLQ32MAVE

FXNQ32MAVE

FXLQ25MAVE

FXNQ25MAVE

FXLQ20MAVE

FXNQ20MAVE

FXLQ63MAVE

FXNQ63MAVE

1-phase, 220-240 V/220 V, 50/60 Hz

1,900 2,400 3,100 3,900 4,800 6,100

7,500 9,600 12,300 15,400 19,100 24,200

2.2 2.8 3.6 4.5 5.6 7.1

FXLQ: Ivory white (5Y7.5/1)/FXNQ: Galvanised steel plate

7/6 7/6 8/6 11/8.5 14/11 16/12

247/212 247/212 282/212 388/300 494/388 565/424

35/32 35/32 35/32 38/33 39/34 40/35

600×1,000×222 600×1,000×222 600×1,140×222 600×1,140×222 600×1,420×222 600×1,420×222

610×930×220 610×930×220 610×1,070×220 610×1,070×220 610×1,350×220 610×1,350×220

25.0 25.0 30.0 30.0 36.0 36.0

19.0 19.0 23.0 23.0 27.0 27.0

6.4 6.4 6.4 6.4 6.4 9.5

12.7 12.7 12.7 12.7 12.7 15.9

21O.D.

cfm

dB(A)

mm

kg

mm

kcal/h

Btu/h

kW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Power consumption

Casing


Machine weight

Pipingconnections

Power supply

Cooling capacity

MODEL

Cooling

Sound level (H/L)

Power consumption

Casing

Power supply

Cooling capacity

MODEL

Cooling

Airflow rate (H/L)

Rp1 (PS 1B internal thread)

Long-life filter (anti-mould resin net)

Belt drive system

3-phase 4-wire system, 380–415 V, 50 Hz

Ivory white (5Y7.5/1)

FXVQ125NY1

1,670×750×510

118

52

15.9 (Brazing)

FXVQ250NY1FXVQ200NY1

0.53

12,000

47,800

14.0

19,300

76,400

22.4

24,100

95,500

28.0

1.611.33

1,670×1,170×510

169

60

22.2 (Brazing)

1,670×950×510

144

56

9.5 (Brazing)

19.1 (Brazing)

0.75

43

1,518

1.5

69

2,436

1.5

86

3,036

152 217 281

Notes: Specifications are based on the following conditions;•Cooling : Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB.•Capacity of indoor unit is only f or reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)*1 Sound level : measured when the air discharge outlet duct (2 m) is attached (anechoic chamber conversion value).

It increases by approximately 5 dB(A) when the plenum chamber is installed to deliver direct airflow.*2 The value is the external static pressure with standard pulley.

mm

kg

dB(A)

mm

mmmm

kW

m3/min

cfm

Pa

kcal/h

Btu/h

kW

kW

Liquid

GasDrain

Type

Motor output

Airflow rate

Externalstaticpressure*2

Drive system

Power consumption

Casing colour

Sound level *1


Machine weight

Piping

connections

Power supply

Cooling capacity

MODEL

Cooling

Air filter

Fan

cfm

dB(A)

kcal/h

Btu/h

kW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Machine weight

Pipingconnections

Sound level (H/L)

Dimensions(H×W×D)

FXLQ

FXNQ

FXLQ

FXNQ

mm

kg

mm

Airflow rate (H/L)

•

•Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.

Capacity of indoor unit is only f or reference. Actual capacity of indoor unit is based on the total capacity index.

(See Engineering Data Book for details.)•Sound level: Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward.

During actual operation, these values are normally somewhat higher as a result of ambient conditions.

•

220 V

240 V 37/34 37/34 37/34 40/35 41/36 42/37

Ceiling Suspended Type

FXHQ32MAVE FXHQ63MAVE FXHQ100MAVE

1-phase, 220-240 V/220 V, 50/60 Hz

3,100 6,100 9,600

12,300 24,200 38,200

3.6 7.1 11.2

0.111 0.115 0.135

White (10Y9/0.5)

12/10 17.5/14 25/19.5

424/353 618/494 883/688

36/31 39/34 45/37

195×960×680 195×1,160×680 195×1,400×680

24.0 28.0 33.0


cfm

dB(A)

mm

kg

mm

kcal/h

Btu/h

kW

kW

m3/min

Liquid (Flare)

Gas (Flare)

Drain

Power consumption

Casing


Machine weight

Pipingconnections

Power supply

Cooling capacity

MODEL

Cooling

Sound level (H/L)

Airflow rate (H/L)

6.4

12.7 15.9 15.9

9.5 9.5


23/34

Specifications

43 44

Residential Indoor Units with connection to BP units

Wall Mounted Type

BP Units for connection to residential indoor units

Note: * The operation sound level values represent those for rear-suction operation and an external static pressure of 30 Pa for FDKS-EA and 40 Pa

for FDKS-C. Sound level values for bottom-suction operation can be obtained by adding 6 dB (A) for FDKS-EA and 5 dB (A) for FDKS-C.

8.7 (307)

200X700X620 200X900X620 200X1,100X620

3027

40

25

VP20 (External Dia. 26/Internal Dia. 20)

Both liquid and gas pipes

21

30

9 .5 (3 35 ) 1 0.0 (3 53 ) 1 2. 0 (4 24 )

37/33/3135/31/29

16.0 (565)

38/34/32

1-phase, 220-240 V/220-230 V, 50/60 Hz

5 steps, quiet and automatic

Microcomputer control

MODEL

Power supply

Airflow rates (H) m3/min(cfm)

Sound levels (H/L/SL)* dB (A)

Fan speed

Temperature control

Dimensions (HXWXD) mm

kg

mm

Pa

Machine weight

Liquid (Flare)

Gas (Flare)

Drain

Pipingconnections

Heat insulation


9.5

6.4

12.7

Note: * Total auxiliary piping length.

1-phase, 220-240 V/220-230 V, 50/60 Hz

10

0.05

180X294 (+356*)X350

3 for power supply (including earth wiring), 2 for interunit wiring (outdoor unit-BP, BP-BP),4 for interu

catalogue daikin vrv iv s

Documents