108

ELEC

TRO

NIC

SYS

TEM

S Sequencer for dust collector systems - E1T

Sequencer for controlling the pneumatic cleaning of industrial dust collector systems.It has 2 output relay contacts and 2 digital input contacts.0.8’’ 3-digit 7-segment LED display, which allows you to readthe timer operating status, active solenoid valves, and alarms (if any).You can set the pulse width, pause between solenoid valves, and number of solenoid valves to clean from the configuration menu.

You can also determine the status (on/off) of the fan through the input contact of the terminal board.In the event that the fan is off, you can programme a certain number of cleaning cycles (cleaning with fan off). You can define the pause between one solenoid valve and the other also for these cleaning cycles.

DESCRIPTION

TECHNICAL FEATURESOperating temperature -10°C + 55°CStorage temperature -20°C + 60°CSolenoid valve pulse width 5ms - 5sPause between valve opening 1s - 999sPower supply 115 VAC 50-60HZ

230 VAC 50-60HZ24 VAC 50-60 HZ24 VDC - 25W - 50W (optional)

Output voltage 24 VDC24-115-230 VAC 50-60 HZ(selected via jumper)

REFERENCE STANDARDS

This product complies with the following standards:Machinery Directive 2006/42/EC “electromagneticcompatibility” meeting harmonised EUstandards EN61000-6-4:2001Low Voltage Directive 2006/95/ECmeeting EU harmonised standardsEN 60947-1:2004

Dimensions

Up to 8 inputs => a=175, b=160, c=175, d=160, h=75Over 8 inputs => a=175, b=160, c=250, d=235, h=75

109109109

ELEC

TRO

NIC

SYS

TEM

S

Fuse

Pow

er su

pply

Solen

oid

valve

Solen

oid

valve

Solen

oid

valve

Solen

oid

valve

Solen

oid

valve

Solen

oid

valve

Solen

oid

valve

Solen

oid

valve

30 - C

omm

on

3 - G

ND

Alar

m re

lay

cont

act

Alar

m re

lay

115-

230

VAC

115-

230

VAC

GND

Alar

m re

lay

Fan

cont

act i

nput

Fan

Fan

Enab

le c

onta

ct in

put

Enab

le

Enab

le

Sole

noid

val

ve o

utpu

t

E1T - Sequencer for dust collector systems

Alar

m re

lay

Alar

m re

lay

FUNCTIONS DESCRIPTIONF02 F02 solenoid valve activation time (0.05s - 5s)F03 Cleaning pause between solenoid valves (1s - 999s)F04 Number of connected outputs (01-16)F05 Cleaning pause between solenoid valves (1s - 999s)F06 Cleaning pause between solenoid valves (1s - 999s)F13 Number of post-cleaning cycles, fan off (1-99 cycles)F14 Post-cleaning pause between solenoid valves (1s - 999s)F15 Maintenance interval expressed in tens of hoursF16 Maintenance alarm enabling (0 disabled; 1 enabled)F17 Maintenance meter reset

FUSE1 X 1 A => 230 Vac1 X 2 A => 115 Vac1 X 3 A => 24 Vac (optional)1 X 3 A => 24 Vdc (optional)

CONTAINERBase material: ABSCover material: polycarbonateIP65 water and dust protection (EN60529)IK08/07(8J) impact resistance (EN62262)

WARRANTY

The warranty has a duration of 2 years, during which the company will replace any defective electronic component.The warranty is void in the event of signs oftampering and unauthorised repairs, misuse of the equipment, improper electrical connec-tions, failure to comply with system standards, use non-compliant with EC standards, weather events, such as lightning, overvoltage, clogged pneumatic connections, damaged pipes.