catalogo productos rain bird

Agricultural Sprinkler Catalog

LF ™ SERIES SPRINKLERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3LF800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7LF1200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9LF2400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11LF ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

IMPACT SPRINKLERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1514VH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17L20VH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18L20H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19M20VHPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2020JH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2120ADJB08 / 20ADJB10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2229JH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23L36H / L36AH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2446H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2630H / 30WH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2830PWH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3014070H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31L3030H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3330FH / 30FWH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3470CH / 70CHM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3580EHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3725BPJFPADJ / 25BPJFPADJDATNT . . . . . . . . . . . . . . . . 392045PJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4035ATNT / 35AADJTNT / 35APJADJTNT35APJDATNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4165PJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4285EHD / 85EWHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4385EHDLA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

PERFORMANCE DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471/2" IMPACT SPRINKLERS . . . . . . . . . . . . . . . . . . . . . . . . . . . 4915 mm IMPACT SPRINKLERS . . . . . . . . . . . . . . . . . . . . . . . . . 503/4" IMPACT SPRINKLERS . . . . . . . . . . . . . . . . . . . . . . . . . . . 5120 mm IMPACT SPRINKLERS . . . . . . . . . . . . . . . . . . . . . . . . . 52

TECHNICAL GUIDES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55HYDRAULIC FORMULAS FOR SPRINKLERS . . . . . . . . . . . . . . 56DISTRIBUTION UNIFORMITY FOR SPRINKLER IRRIGATION . . . . . . . . . . . . . . . . . . . . . . . . 57UNIFORMITY PRO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59FROST PROTECTION GUIDE BY SPRINKLING . . . . . . . . . . . . 61MAINTENANCE GUIDE IMPACT SPRINKLERS . . . . . . . . . . . . 63

MICROQUICK™ SPRAYS & MICROBIRD® SPINNERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

MICROQUICK SPRAYS WATER APPLICATIONFOR A YOUNG TREE VS. A MATURE TREE . . . . . . . . . . . . . . . . 69FEATURES AND BENEFITS . . . . . . . . . . . . . . . . . . . . . . . . . . . 70MICROQUICK SPRAYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71PERFORMANCE DATA AND STAKE ASSEMBLY . . . . . . . . . . . 72MICROBIRD SPINNERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73MICROQUICK CATALOG NUMBERS . . . . . . . . . . . . . . . . . . . . 74MICROQUICK PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Table of Contents

Uniformity Rivaled Only by Rain

LF™ Series Sprinklers

The LFTM Series Sprinkler family can be ordered fully assembled or as individual components. Utilize Rain Bird’s FREEUniformity ProTM software to make your sprinkler selections, or contact a RainBird dealer for assistance.• Uniformity ProTM is available online at www.rainbird.com/ag. LF™ Series accessories can be found on page 13. • To place an order in the United States call (800) HELLO AG (435-5624) or,

use the Toll-FREE Fax Ordering number at (800) 843-4162. • Customers outside the U.S. can contact the International Customer Service Department at (520) 878-2400

to place an order.

Part numberfor Deflector

Only

Part numberfor Nozzle

Only

Part numberfor Drive Only

Part number for Deflector,Nozzle, and Drive Assembled

with NPT Body*

Part number for Deflector,Nozzle, and Drive Assembled

with ACME Body

* Part numbers for the NPT, ACME and anti-theft bodies can be found on page 13.

How to Order from the LF™ Series Sprinkler Section

Technical Specifications

The Rain Bird® LF Series Sprinkler is built rugged to withstand the harsh conditions inagricultural applications. It has been designed to combine the advantages of an impactsprinkler with stream height flexibility that delivers precise, uniform and unrivaled waterdistribution.

This low-flow sprinkler series offers full-circle operation with a variety of color-codednozzles and deflector inserts that snap into place with the push of a finger, makingaccommodations to every setup a snap.

Features and Benefits◆ High Distribution Uniformity• Weighted drive disk provides long dwell time between stream interruptions to achieve the

maximum distance of throw• The deflector is designed to provide a fan pattern to optimize uniformity • During impact, the Precision Jet (PJ) spoon directs the water stream into the field

preventing erosion at the riser base

◆ Most Robust Sprinkler in its Class• Patented Ceramic Radial Bearing (CRB) is longer lasting than conventional counterparts• Patented Flow Dependent Brake (FDB) stabilizes rotation time over a range of water pressures• Provides consistent performance at high temperatures and below freezing• Deflector made of composite engineered thermoplastic - provides dimensional stability,

resists wear caused by dirty water conditions• Drive disk made of engineered thermoplastic - shields and protects sprinkler from freezing,

wind-blown and water-borne debris• Springs and pin composed of high-grade stainless steel for corrosion resistance• Ultraviolet (UV) stabilizer protects the sprinkler from the sun

◆ Easy to Use• Sprinkler is comprised of: the drive unit, body, deflector and nozzle

Each piece can be purchased separately• EZ-twist tabs allow simple removal of the drive unit; no tools required• Nozzles and deflectors snap in place with the push of a finger • Color-coded nozzles and deflectors allow easy identification• Weed Guard blocks weeds from growing into the sprinkler and stopping the rotations

Accessories • Edge Guard (Road Guard) precisely directs water back to the field

It can also be used as a part circle on edges and row ends• Splash Guard fits over the top of the sprinkler and directs water downwards. When removing

or replacing the sprinkler, allowing users to change or clean nozzles without getting soaked• Stream Splitter splits the water to avoid direct water streams into tree trunks, equipment,

and general areas that do not need watering

Operating Range• Pressure: 25 to 60 psi (1.7 to 4.1 bar)• Flow Rate: 0.77 to 4.02 gpm (175 to 913 l/hr)

LF™ Series Sprinkler

Specifications• 1/2” (13 mm) NPT male pipe thread• 23mm Acme male thread (requires special adapter)• Anti-theft, NPT and Acme bodies available

Nozzle Sizes: White 0.0703” (1.79mm, 50 drill)Blue 0.078” (1.98mm, 5/64”)Orange 0.086” (2.18mm, 44 drill)Purple 0.094” (2.39mm, 3/32”)Yellow 0.102” (2.59mm, 38 drill)Green 0.109” (2.76mm, 7/64”)Tan 0.117” (2.97mm, 30 drill)Red 0.1250” (3.18mm, 1/8”)Black 0.1325” (3.37mm, 29 drill)Silver 0.1406” (3.57mm, 9/64")

Deflector trajectory outlets are: 6° (Yellow)6° (Dark Purple)9° (Purple)10° (White)10° (Lime Green)12° (Copper)12° (Cyan Blue)12° (Pink)13° (Maroon)15° (Brown)15° (Tangerine)16° (Red)17° (Powder Blue)21° (Olive Green)22° (Dark Green)

www.rainbird.com/ag 55www.rainbird.com/ag

LF™ Series SprinklerTechnical Specifications

www.rainbird.com/ag6

SpecificationsThe full circle sprinkler shall be of a stationary interchangeable nozzle type, with animpact driven rotation and single interchangeable deflector, capable of covering ___(feet, meters) radius, at ____ pounds per square inch (psi) (or bars), a stream height of____ (inches, centimeters) with a discharge rate of ___ (gph, l/hr).

The sprinkler shall require no tools for installation or operation. The sprinkler shall accept___ interchangeable color-coded nozzles with ___ color-coded deflectors. The drive unitshall be removed from the sprinkler body with or without the sprinkler in operation.Removal of the drive unit from the body shall allow access to the deflector. The sprinklerbody shall be removed from the riser for nozzle replacement. Deflectors shall bedesigned to match individual nozzle sizes and provide a water profile that yieldsoptimum uniformity at a multitude of spacings.

There shall be no dynamic or rotating seals in the sprinkler. The nozzle shall seal to thesprinkler body through a stationary pressure-activated seal that does not wear out overtime or need replacement. The main bearing shall be made of a ceramic material for ultralow wear in the dirtiest and grittiest environment. The fulcrum pin is of a patent pendingconfiguration that shall be made of a high-grade stainless steel for superior wearresistance in the worst abrasive environments. The main brake washers shall consist of avery durable integrated plastic capable of enduring gritty and abrasive environments.

The head shall have a web-based configurationselection software available to the owner, to selectthe configuration with the optimum uniformity.

The sprinkler shall maintain rotation times of under80 seconds for 1.0 to 1.5 gpm and under 60 secondsfor 2.0 to 3.9 gpm (under 120 seconds for blue andwhite nozzle applications). The sprinkler mayexperience a break-in period where it shall performout of the factory between 10-40 secondsdepending on flow pressure. The sprinkler shall bean excellent frost protection sprinkler because of itsuniformity patterns.

The amount of time between impacts shall bemuch greater giving the advantage of holding thestream stationary for longer periods of time,allowing the water stream to attain a maximumradius of throw. The time to travel full circle shallremain more consistent through the different flowrates because braking action is done with watermomentum as opposed to line pressure.

The LF Series Sprinkler shall be manufactured byRain Bird Corporation, Azusa, California.

LF™ Series SprinklerPerformance Data

www.rainbird.com/ag 7

LF™ Series SprinklerAccessories

1

2

5

6

7 8 93

4

Female Acme

Female Acme

1/2” Male NPT

Female Slip1/2” , 3/4” , .25mm

Simple 4-Piece Assembly1 Deflector

2 LF Drive Unit 800, 1200, 2400 models available

3 LF Body 1/2”, Acme, or Acme Anti-Theft models available

4 Nozzle

5 Acme x 1/2” Male NPT Adapter PN: 118292

6 Acme x Female Slip Adapter 1/2“x 3/4” Socket-Gray PN: 118328

1/2“ x 25mm Socket-White PN: 118293

7 Edge Guard PN: 118366

8 Splash Guard PN: 118337

9 Stream Splitter/Tree Trunk Guard PN: 118259

Optional Accessories and Part Numbers

Find the best combination for your spacings by using Rain Bird'sUniformity Pro™ software at www.rainbird.com/ag


Part Numbers & DescriptionLF Body & Drive Unassembled

A85100 LF800, NPT Body and Drive Unassembled



A85100AT LF800, ACME Thread, Anti-Theft Body & Drive Unassembled



LF Bodies

118134 LF NPT Body

118311 LF ACME Body (no screws)

118310 LF Anti-theft ACME Body (with screws)

118307 LF Anti-theft horizontal top screw

118308 LF Anti-theft vertical bottom screw

118317 LF Anti-theft screwdriver

14

Notes

www.rainbird.com/ag

Impact Sprinklers

Nozzle Only XX = Nozzle Size

U.S. Standard 1/16" 51 DRILL 5/64" 3/32" 7/64"

Metric 1.59 mm 1.70mm 1.98 mm 2.38 mm 2.78 mm

Brass Straight Bore Nozzle SBN-1 105780-XX 04 51 05 06 07Assembled Sprinkler/NozzleFactory Combination

Sprinkler with Nozzle

SBN-1 5/64" A0162005

Sprinkler Only

Sprinkler without Nozzle A01619

Bold nozzle size numbers denote the most common nozzle choices.

Part Numbers and Ordering Information

The majority of the brass impact sprinklers and nozzles are ordered separately.

Where applicable, part numbers for assembled combinations are provided.

• To place an order in the United States call (800) HELLO AG (435-5624) or,use the Toll-FREE Fax Ordering number at (800)843-4162.

• Customers outside the U.S. can contact the International Customer Service Department at (520) 878-2400to place an order.

Part number forSprinkler Only

Part number for AssembledSprinkler and Nozzle, when

available.

Part numberfor Nozzle

Only

Available Nozzle Size. Use thisnumber to complete the

Nozzle part number.

How to Order from the Brass Impact Sprinkler Sections

Option Guide (where available)

FP Full or Part Circle

BPJ Brass Precision Jet

ADJ Adjustable Nozzle

DA Distance Control Flap

H Superior H bearing

TNT Teflon, Nylon, Teflon Washer Stack

PJ Precision Jet Spoon

Full Circle Impact Sprinklers1/2 " (13mm) Sprinklers


STRAIGHT BORE NOZZLE SBN1*(Stream Height: 6 ft.)

NOZZLE SIZE U.S. STANDARD1/16" 51 DRILL 5/64" 3/32" 7/64"

PSI @Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM

20 - - 29 0.59 30 0.79 33 1.14 34 1.5525 29 0.56 29 0.65 31 0.88 33 1.27 35 1.7330 29 0.62 30 0.71 31 0.97 34 1.39 35 1.9035 30 0.66 30 0.77 32 1.05 34 1.50 36 2.0540 30 0.72 31 0.83 32 1.12 35 1.61 37 2.1945 31 0.75 31 0.87 33 1.19 35 1.71 37 2.3250 31 0.80 32 0.92 34 1.25 36 1.80 38 2.4555 32 0.84 32 0.96 34 1.31 36 1.89 38 2.5760 32 0.88 33 1.01 34 1.37 37 1.97 38 2.68

* Available without Nozzle or Assembled with 5/64” (05) Straight Bore Nozzle. All other Nozzles must be purchased separately.See Chart below.

STRAIGHT BORE NOZZLE SBN1*(Stream Height: 1.8m)

NOZZLE SIZE METRIC1.59 mm 1.70 mm 1.98 mm 2.38 mm 2.78 mm

(1/16") (51 Drill) (5/64") (3/32") (7/64")BARS@ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) ((m) (lps) (m3/h) (m) (lps) (m3/h)

1.4 - - - 8.8 0.04 0.13 9.3 0.05 0.18 10.1 0.07 0.26 10.4 0.10 0.351.5 - - - 8.9 0.04 0.14 9.3 0.05 0.19 10.1 0.07 0.27 10.5 0.10 0.372.0 9.0 0.04 0.14 9.1 0.04 0.16 9.6 0.06 0.22 10.3 0.09 0.31 10.8 0.12 0.422.5 9.2 0.04 0.15 9.3 0.05 0.18 9.8 0.07 0.24 10.6 0.10 0.35 11.0 0.13 0.473.0 9.4 0.05 0.17 9.6 0.05 0.19 10.1 0.07 0.27 10.8 0.11 0.38 11.4 0.14 0.523.5 9.6 0.05 0.18 9.8 0.06 0.21 10.4 0.08 0.29 11.0 0.11 0.41 11.6 0.16 0.564.0 9.8 0.05 0.20 10.0 0.06 0.22 10.5 0.08 0.31 11.2 0.12 0.44 11.7 0.17 0.604.1 9.9 0.06 0.20 10.1 0.06 0.23 10.5 0.09 0.31 11.3 0.12 0.45 11.7 0.17 0.61

Assembled Sprinkler/NozzleFactory Combination


SBN-1 5/64" A0162005

Sprinkler Only






Brass Straight Bore Nozzle SBN-1 105780-XX 04 51 05 06 07

U.S. STANDARD DATA | METRIC DATA

PERFORMANCE DATA 14VH

14VH1/2" 13mm Full Circle, Brass, Wedge Drive Impact Sprinkler

BEARING: 1/2" Male NPT, BrassTrajectory Angle: 23°Operating Range: 20-60 psi 1.4-4.1 barsFlow Rate: .56-2.68 GPM 0.14-0.61 m3/hRadius: 29-38 ft. 9.0-11.70 metersOne 1/8” Female NPT Nozzle Port

Features• Patented, self-flushing

wedge drive • Durable brass die-cast arm• Stainless steel springs and

fulcrum pin• Chemically resistant washers • Two-year warranty

Benefits• Wedge drive runs on smaller nozzles and

lower pressures• Self-flushing design reduces

wear from grit• Corrosion and grit resistant• Built to last





PERFORMANCE DATA


Sprinkler Only


STRAIGHT BORE NOZZLE SBN1* (Stream Height: 2.5 ft.)

NOZZLE SIZE U.S. STANDARD

1/16" 51 drill 5/64" 3/32" 7/64"PSI @Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM

25 23 0.56 24 0.65 25 0.88 26 1.27 27 1.7330 24 0.62 25 0.71 26 0.97 27 1.39 28 1.9035 25 0.66 26 0.77 27 1.05 28 1.50 29 2.0540 25 0.72 26 0.83 27 1.12 29 1.61 30 2.1945 26 0.75 27 0.87 28 1.19 30 1.71 31 2.3250 27 0.80 28 0.92 29 1.25 31 1.80 32 2.45

STRAIGHT BORE NOZZLE SBN1* (Stream Height: 0.8m)


BARS @(1/16") (51 drill) (5/64") (3/23") (7/64")

Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNOZZLE (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

1.7 7.2 0.04 0.13 7.3 0.04 0.15 7.6 0.06 0.20 8.1 0.08 0.29 8.2 0.11 0.392.0 7.3 0.04 0.14 7.6 0.04 0.16 7.9 0.06 0.22 8.3 0.09 0.31 8.5 0.12 0.422.5 7.7 0.04 0.15 7.9 0.05 0.17 8.3 0.07 0.24 8.8 0.10 0.35 8.9 0.13 0.473.0 8.0 0.05 0.17 8.2 0.05 0.20 8.6 0.07 0.27 9.1 0.11 0.38 9.4 0.14 0.523.5 8.2 0.05 0.18 8.5 0.06 0.21 8.8 0.08 0.28 9.4 0.11 0.41 9.6 0.15 0.56



U.S. Standard 1/16" 51 DRILL 5/64" 3/32" 7/64" 1/8"

Metric 1.59 mm 1.70mm 1.98 mm 2.38 mm 2.78 mm 3.18 mm

Brass Straight Bore Nozzle SBN-1 105780-XX 04 51 05 06 07 –

L20VH

L20VH1/2" 13mm Full Circle, Brass, Wedge Drive Impact Sprinkler

Bearing: 1/2" Male NPT, BrassTrajectory Angle: 10°Operating Range: 25-50 psi 1.7-3.5 barsFlow Rate: 0.56-2.45 GPM 0.13-0.56 m3/hRadius: 23-32 ft. 7.2-9.6 metersOne 1/8” Female NPT Nozzle Port




Benefits• Wedge drive runs on smaller nozzles

and lower pressures• Self-flushing design reduces


* Nozzles must be purchased separately.See Chart below.




PERFORMANCE DATA


Sprinkler Only


STRAIGHT BORE NOZZLE (SBN-1)*(Stream Height: 2.5 ft.)

NOZZLE SIZE U.S. STANDARD

7/64" 1/8" 9/64"PSI @Nozzle Rad. GPM Rad. GPM Rad. GPM

25 28 1.73 29 2.26 30 2.8630 29 1.90 30 2.48 31 3.1435 30 2.05 31 2.68 33 3.3940 31 2.19 32 2.86 33 3.6245 32 2.32 33 3.03 34 3.8450 32 2.45 34 3.20 35 4.05


NOZZLE SIZE METRIC2.78 mm 3.18 mm 3.57 mm

BARS

(7/64") (1/8") (9/64")

NozzleRad. Flow Flow Rad. Flow Flow Rad. Flow Flow(m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

1.7 8.5 0.11 0.39 9.0 0.14 0.51 9.3 0.18 0.652.0 8.8 0.12 0.42 9.2 0.15 0.55 9.5 0.19 0.702.5 9.2 0.13 0.47 9.7 0.17 0.62 10.1 0.22 0.783.0 9.7 0.14 0.52 10.0 0.19 0.68 10.4 0.24 0.863.5 9.9 0.15 0.56 10.4 0.20 0.73 10.8 0.26 0.92


L20H


U.S. Standard 7/64" 1/8" 9/64"

Metric 2.78 mm 3.18 mm 3.57 mm

Brass Straight Bore Nozzle SBN-1 105780-XX 07 08 09


L20H1/2" 13mm Full Circle, Brass Impact Sprinkler


Features• Durable brass die-cast arm• Stainless steel springs and

fulcrum pin• Chemically resistant washers• Two-year warranty

Benefits• Spoon drive arm runs on larger nozzles

and higher pressures• Corrosion and grit resistant• Built to last



PERFORMANCE DATA


STRAIGHT BORE NOZZLE SBN1* (Stream Height: 3.5 ft.)

NOZZLE SIZE US STANDARD1/16" 51 DRILL 5/64" 3/32" 7/64"

PSI @Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad.. GPM

25 25 0.56 26 0.65 27 0.88 29 1.27 31 1.7330 26 0.62 27 0.71 28 0.97 30 1.39 32 1.9035 27 0.66 28 0.77 29 1.05 31 1.50 33 2.0540 28 0.72 28 0.83 30 1.12 32 1.61 34 2.1945 29 0.75 29 0.87 31 1.19 33 1.71 35 2.3250 29 0.80 30 0.92 32 1.25 33 1.80 35 2.45

* Nozzle must be purchased separately.See Chart below.



BARS @(1/16") (51 Drill) (5/64") (3/32") (7/64")

NozzleRad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow(m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

1.7 7.8 0.04 0.13 7.9 0.04 0.15 8.4 0.06 0.20 9.0 0.08 0.29 9.4 0.11 0.392.0 8.0 0.04 0.14 8.2 0.04 0.16 8.6 0.06 0.22 9.2 0.09 0.31 9.7 0.12 0.422.5 8.4 0.04 0.15 8.6 0.05 0.18 9.1 0.07 0.24 9.7 0.10 0.35 10.1 0.13 0.473.0 8.7 0.05 0.17 8.9 0.05 0.19 9.4 0.07 0.27 10.0 0.11 0.38 10.6 0.14 0.523.5 9.0 0.05 0.18 9.1 0.06 0.21 9.8 0.08 0.28 10.2 0.11 0.41 10.8 0.15 0.56





Brass Straight Bore Nozzle SBN-1 105780-XX 04 51 05 06 07

Sprinkler Only


M20VH-PM


M20VH-PM1/2" 13mm Full Circle, Brass, Wedge Drive Impact Sprinkler

Bearing: 1/2" Male NPT, PlasticTrajectory Angle: 15°Operating Range: 25-50 psi 1.7-3.5 barsFlow Rate: .56-2.45 GPM 0.13-0.56 m3/hRadius: 25-35 ft. 7.8-10.8 metersOne 1/8” Female NPT Nozzle Port




BENEFITS• Wedge drive runs on smaller nozzles

and lower pressures• Self-flushing design reduces



21www.rainbird.com/ag


STRAIGHT BORE NOZZLE SBN1* (Stream Height: 6 ft.)

STRAIGHT BORE NOZZLE WITH VANE SBN1V* (Stream Height: 7 ft.)

NOZZLE SIZE US STANDARD7/64" 1/8" 9/64" 5/32"

PSI @Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM

35 38 2.05 38 2.68 39 3.39 39 4.1940 38 2.19 39 2.86 40 3.62 39 4.4745 39 2.32 39 3.03 40 3.84 40 4.7350 39 2.45 39 3.20 40 4.05 40 5.0055 39 2.57 40 3.35 40 4.24 40 5.2360 39 2.68 40 3.50 41 4.43 41 5.47

NOZZLE SIZE US STANDARD1/8" 9/64" 5/32"

PSI @Nozzle Rad. GPM Rad. GPM Rad. GPM

35 39 2.68 41 3.39 42 4.1940 40 2.86 41 3.62 42 4.4745 40 3.03 42 3.84 42 4.7350 41 3.20 42 4.05 43 5.0055 41 3.35 43 4.24 43 5.2360 41 3.50 43 4.43 44 5.47

* Available without Nozzle or Assembled with eithera 7/64” (07) or 1/8” (08) Straight Bore Nozzle. All other Nozzles must be purchased separately. See Chart below.



SBN-1 7/64"A0584107


SBN-1 1/8" A0584108


STRAIGHT BORE NOZZLE WITH VANE SBN1V* (Stream Height: 2.1m)

NOZZLE SIZE METRIC2.78 mm 3.18 mm 3.57 mm 3.97 mm

(7/64") (1/8") (9/64") (5/32")BARS@ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

2.4 11.6 0.13 0.47 11.7 0.17 0.61 12.0 0.21 0.77 12.0 0.26 0.952.5 11.6 0.13 0.47 11.8 0.17 0.62 12.1 0.22 0.78 12.0 0.27 0.973.0 11.8 0.14 0.52 12.0 0.19 0.68 12.2 0.24 0.86 12.1 0.29 1.063.5 11.9 0.16 0.56 12.1 0.20 0.73 12.3 0.26 0.93 12.3 0.32 1.144.0 12.0 0.17 0.60 12.2 0.22 0.78 12.4 0.27 0.99 12.4 0.34 1.224.1 12.0 0.17 0.61 12.2 0.22 0.79 12.5 0.28 1.01 12.5 0.35 1.24


(1/8") (9/64") (5/32")BARS@ Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

2.4 12.0 0.17 0.61 12.5 0.21 0.77 12.8 0.26 0.952.5 12.1 0.17 0.62 12.5 0.22 0.78 12.8 0.27 0.973.0 12.3 0.19 0.68 12.8 0.24 0.86 13.0 0.29 1.063.5 12.5 0.20 0.73 13.0 0.26 0.93 13.1 0.32 1.144.0 12.5 0.22 0.78 13.2 0.27 0.99 13.3 0.34 1.224.1 12.5 0.22 0.79 13.3 0.28 1.01 13.4 0.35 1.24


Nozzle Only XX = Nozzle SizeU.S. Standard 7/64" 1/8" 9/64" 5/32"

Metric 2.78 mm 3.18 mm 3.57 mm 3.97 mm

Brass Straight Bore Nozzle SBN-1 105780-XX 07 08 09 10

Brass Straight Bore Nozzlewith Vane SBN-1-V 106160-XX – 08 09 10

Sprinkler Only



PERFORMANCE DATA 20JH

20JH1/2" 13mm Full Circle, Brass Impact Sprinkler

Bearing: 1/2" Male NPT, BrassTrajectory Angle: 23°Operating Range: 35-60 psi 2.4-4.1 barsFlow Rate: 2.05.47 GPM 0.47-1.24 m3/hRadius: 38-44 ft. 11.6-13.4 metersOne 1/8” Female NPT Nozzle Port

Features• Durable brass die-cast arm• Stainless steel springs and

fulcrum pin• Chemically resistant

Teflon™ washers• Two-year warranty

Benefits• Spoon drive arm runs on larger nozzles

and higher pressures• Corrosion and grit resistant• Built to last




SBN-1 1/8" 20ADJB08 A0231108


SBN-1 5/32" 20ADJB10 A0231110


U.S. Standard 1/8" 9/64" 5/32"


Brass Straight BoreNozzle SBN-1 105780-XX 08 09 10


22 www.rainbird.com/ag



PERFORMANCE DATA 2ADJB08 / 20ADJB10

20ADJB08 / 20ADJB101/2" 13mm Full Circle, Brass Impact Sprinkler

Bearing: 1/2" Male NPT, BrassTrajectory Angle: 23˚Operating Range: 30-70 psi 2.1-4.8 barFlow Rate: 2.4-5.9 GPM. 0.54-1.34 m3/hRadius: 39-41 ft. 11.6-12.5m

Features• Heavy duty brass construction• Stainless steel springs and fulcrum pin• Chemically resistant washers• Two-year warranty

Benefits• Wide range of flow rates• Corrosion and grit resistant• Built to last


STRAIGHT BORE NOZZLE (SBN-1)*(Stream Height: 2.5 ft.)

NOZZLE SIZE US STANDARD


30 39.0 2.4 39.0 3.1 39.0 3.840 39.0 2.9 40.0 3.62 40.0 4.450 40.0 3.2 40.0 4.00 41.0 5.060 40.0 3.6 41.0 4.4 41.0 5.570 40.0 3.9 41.0 4.8 41.0 5.9

* Available w/o nozzle or assembled w/ 1/8" (08) or 5/32" (10) Straight Bore Nozzle.See Chart below.

STRAIGHT BORE NOZZLE SBN1 (Stream Height: 0.8m)


BARS

(1/8") (9/64") (5/32")

NozzleRad. Flow Flow Rad. Flow Flow Rad. Flow Flow(m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

2.1 11.6 0.15 0.54 11.9 0.20 0.70 11.9 0.24 0.862.5 11.8 0.17 0.61 12.1 0.22 0.77 12.1 0.26 0.953.0 11.9 0.19 0.67 12.2 0.24 0.84 12.2 0.29 1.043.5 12.0 0.20 0.73 12.3 0.26 0.91 12.3 0.31 1.134.0 12.1 0.22 0.79 12.4 0.27 0.98 12.4 0.34 1.214.5 12.2 0.24 0.85 12.5 0.29 1.05 12.5 0.36 1.304.8 12.2 0.25 0.89 12.5 0.30 1.09 12.5 0.37 1.34





7/64" 1/8" 9/64" 5/32"PSI @Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM

20 35 1.56 36 2.03 38 2.57 39 3.1725 37 1.74 37 2.27 38 2.87 40 3.5530 37 1.91 38 2.49 39 3.15 41 3.8935 38 2.06 38 2.69 40 3.40 42 4.2040 38 2.20 39 2.87 41 3.64 42 4.4945 39 2.33 39 3.05 41 3.86 43 4.7650 39 2.46 40 3.21 42 4.07 44 5.0255 39 2.58 40 3.37 84 4.28 44 5.2660 39 2.69 40 3.52 42 4.45 44 5.5065 39 2.80 41 3.66 43 4.64 45 5.7270 39 2.91 41 3.80 43 4.81 45 5.9475 40 3.01 41 3.93 44 4.98 46 6.1580 40 3.11 42 4.06 44 5.14 46 6.35



(7/64") (1/8") (9/64") (5/32")BARS@ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

1.4 10.8 0.10 0.35 11.1 0.13 0.46 11.6 0.16 0.58 11.9 0.20 0.721.5 11.0 0.10 0.37 11.2 0.13 0.48 11.6 0.17 0.61 12.0 0.21 0.752.0 11.4 0.12 0.43 11.5 0.15 0.56 12.0 0.20 0.70 12.4 0.24 0.872.5 11.6 0.13 0.48 11.8 0.17 0.62 12.3 0.22 0.79 12.8 0.27 0.973.0 11.8 0.14 0.52 12.1 0.19 0.68 12.6 0.24 0.86 13.1 0.30 1.063.5 11.9 0.16 0.56 12.2 0.20 0.73 12.8 0.26 0.93 13.4 0.32 1.154.0 12.0 0.17 0.60 12.4 0.22 0.79 13.0 0.28 1.00 13.6 0.34 1.234.5 12.0 0.18 0.64 12.6 0.23 0.83 13.1 0.29 1.06 13.7 0.36 1.305.0 12.1 0.19 0.67 12.7 0.24 0.88 13.3 0.31 1.11 13.9 0.38 1.375.5 12.2 0.20 0.71 10.1 0.26 0.92 13.4 0.32 1.17 14.2 0.40 1.44



U.S. Standard 7/64" 1/8" 9/64" 5/32"

Metric 2.78 mm 3.18 mm 3.57 mm 3.97 mm


Sprinkler Only



PERFORMANCE DATA 29JH

29JH1/2" 13mm Full Circle, Brass Impact Sprinkler


Features• Extra large body • Stainless steel springs and


Benefits• Large body accommodates

a wide range of flow rates• Corrosion and grit resistant• Built to last• Spoon drive arm runs on larger nozzles

and higher pressures.



L36AH QUICKFIT STRAIGHT BORE NOZZLE QFSBN3*



35 45 2.10 46 2.70 46 3.4040 46 2.20 47 2.90 47 3.6045 47 2.30 48 3.00 48 3.8050 47 2.40 49 3.20 50 4.0055 48 2.60 49 3.40 51 4.2060 48 2.70 50 3.50 52 4.40

L36AH QUICKFIT LOW PRESSURE NOZZLE SQUARE HOLE QFLPN3*



20 40 1.60 40 2.10 41 2.6025 41 1.80 41 2.30 42 2.9030 42 2.00 43 2.50 43 3.2035 43 2.10 44 2.70 45 3.4040 44 2.20 45 2.90 46 3.6045 45 2.30 45 3.00 46 3.8050 45 2.40 46 3.20 46 4.00

L36H QUICKFIT STRAIGHT BORE NOZZLE QFSBN3 STAR HOLE*

L36H QUICKFIT LOW PRESSURE NOZZLE QFLPN3*

NOZZLE SIZE US STANDARD5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32"

PSI @Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM

20 43 3.20 45 3.80 35 4.50 36 5.30 38 6.00 38 7.20 38 8.20 39 9.30 39 10.4025 45 3.50 46 4.20 38 5.00 39 5.90 39 6.80 40 8.00 40 9.10 40 10.30 41 11.5030 46 3.90 48 4.60 40 5.50 41 6.50 41 7.60 41 8.80 41 10.00 42 11.20 42 12.6035 47 4.20 49 5.00 42 6.00 42 7.10 42 8.30 43 9.50 43 10.80 43 12.10 43 13.6040 48 4.50 50 5.40 43 6.40 43 7.60 43 8.90 44 10.10 44 11.50 45 13.00 45 14.6045 49 4.70 50 5.70 43 6.80 44 8.10 44 9.40 45 10.70 45 12.20 45 13.80 45 15.4050 49 5.00 51 6.00 44 7.20 45 8.50 45 9.90 45 11.30 45 12.90 46 14.50 46 16.30


5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32"PSI @Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM

35 48 4.20 49 5.00 50 6.00 51 7.10 52 8.30 53 9.50 53 10.80 53 12.10 54 13.6040 49 4.50 51 5.40 52 6.40 52 7.60 53 8.90 54 10.10 55 11.50 55 13.00 56 14.6045 51 4.70 52 5.70 53 6.80 53 8.10 54 9.40 55 10.70 56 12.20 57 13.80 58 15.4050 53 5.00 54 6.00 54 7.20 54 8.50 56 9.90 57 11.30 58 12.90 59 14.50 59 16.3055 53 5.20 54 6.30 55 7.50 55 8.90 57 10.30 58 11.80 59 13.50 60 15.20 60 17.1060 54 5.40 55 6.60 55 7.80 56 9.20 58 10.60 59 12.40 60 14.10 61 15.90 61 17.80

Note: Performance data taken using 13' (4m) riser

Nozzle Only XX = Nozzle SizeU.S. Standard | L36H Sprinkler 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32"

Plastic Quick-Fit Straight Bore Nozzle QF-SBN-3 107881-XX 10 11 12 13 14 15 16 17 18

Plastic Quick-Fit Low Pressure Nozzle QF-LPN-3 109247-XX 10 11 12 13 14 15 16 17 18

U.S. Standard | L36AH Sprinkler 7/64" 1/8" 9/64"

13/64"Plastic Quick-Fit Straight Bore Nozzle QF-SBN-3 107881-XX 07 08 09

Plastic Quick-Fit Low Pressure Nozzle QF-LPN-3 109247-XX 07 08 09

Plastic Quick-Fit Plug 10788199 Bold nozzle size numbers denote the most common nozzle choices.

Sprinkler OnlyU.S. Standard

Sprinkler without Nozzle

L36H A07360


L36AH A07350

U.S. STANDARD DATA

PERFORMANCE DATA L36H / L36AH

L36H / L36AH3/4" 19 mm Full Circle, Plastic, Low Angle Impact Sprinkler

Bearing: 3/4" Male NPT, BrassTrajectory Angle: 10°Operating Range: 20-60 psi 1.4-4.1 barsFlow Rate: 1.6-17.8 GPM 0.36-4.04 m3/hRadius: 40-61 ft. 12.2-18.76 meters

Features• Durable Delrin™ plastic body and arm• AH unit has standard spoon

for smaller nozzles• H unit has slotted spoon

for larger nozzles• Exceptionally wide range of

quick-fit nozzles • Stainless steel springs and fulcrum pin• Brass bearing sleeve• Chemically resistant washers• Dual nozzle ports• Two-year warranty

Benefits• Superior chemical and grit resistance• Low angle fights strong wind conditions• Great choice for pivot or

under tree applications• Easy maintenance• Added design flexibility• Built to last


Full Circle Impact Sprinklers3/4 " (19 mm) Sprinklers


L36H


L36AH QUICKFIT STRAIGHT BORE NOZZLE QFSBN3*

L36AH QUICKFIT LOW PRESSURE NOZZLE QFLPN3*


(7/64") (1/8") (9/64")Bars @ Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h)) (m) (lps) (m3/h)

2.4 13.9 0.13 0.48 14.0 0.17 0.61 14.2 0.21 0.772.5 13.9 0.13 0.48 14.1 0.17 0.62 14.2 0.22 0.783.0 14.3 0.14 0.52 14.5 0.19 0.67 14.8 0.24 0.853.5 14.5 0.15 0.55 15.0 0.20 0.73 15.4 0.25 0.924.0 14.7 0.17 0.60 15.2 0.22 0.79 15.8 0.27 0.984.1 14.8 0.17 0.61 15.2 0.22 0.79 15.8 0.28 1.00


(7/64") (1/8") (9/64")Bars @ Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

1.4 12.2 0.10 0.36 12.3 0.13 0.48 12.5 0.16 0.591.5 12.3 0.11 0.38 12.5 0.14 0.49 12.6 0.17 0.612.0 12.7 0.12 0.45 13.0 0.16 0.56 13.2 0.20 0.712.5 13.2 0.13 0.48 13.6 0.17 0.62 13.9 0.22 0.783.0 13.8 0.15 0.53 13.9 0.19 0.67 14.1 0.24 0.883.5 13.9 0.15 0.55 14.0 0.20 0.73 14.2 0.25 0.91

L36H QUICKFIT STRAIGHT BORE NOZZLE QFSBN3*

L36H QUICK-FIT LOW PRESSURE NOZZLE (QF-LPN-3)*

NOZZLE SIZE METRIC3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.56 mm 5.95 mm 6.35 mm 6.75 mm 7.14 mm

(5/32") (11/64") (3/16") (13/64") (7/32") (15/64") (1/4") (17/64") (9/32")Bars @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

2.4 14.8 0.26 0.95 15.1 0.32 1.14 15.2 0.38 1.36 15.5 0.45 1.61 15.8 0.52 1.89 16.2 0.60 2.16 16.3 0.68 2.45 16.3 0.76 2.75 16.5 0.86 3.092.5 14.9 0.27 0.97 15.2 0.32 1.16 15.4 0.38 1.39 15.7 0.46 1.64 15.9 0.53 1.92 16.2 0.61 2.19 16.4 0.69 2.49 16.5 0.78 2.80 16.6 0.87 3.143.0 15.5 0.29 1.05 15.9 0.35 1.27 16.1 0.42 1.52 16.2 0.50 1.81 16.5 0.58 2.10 16.8 0.66 2.39 17.1 0.76 2.72 17.2 0.86 3.08 17.5 0.96 3.443.5 16.2 0.32 1.14 16.5 0.38 1.37 16.6 0.46 1.65 16.7 0.54 1.94 17.1 0.63 2.26 17.4 0.72 2.58 17.9 0.82 2.95 18.0 0.92 3.32 18.2 1.04 3.734.0 16.4 0.34 1.21 16.7 0.41 1.47 16.9 0.48 1.74 17.0 0.57 2.06 17.6 0.66 2.38 18.0 0.77 2.76 18.3 0.87 3.15 18.5 0.99 3.55 18.6 1.11 3.984.1 16.5 0.34 1.23 16.8 0.42 1.50 16.9 0.49 1.77 17.1 0.58 2.09 17.7 0.67 2.41 18.1 0.78 2.82 18.4 0.89 3.20 18.6 1.00 3.61 18.7 1.12 4.04


(5/32") (11/64") (3/16") (13/64") (7/32") (15/64") (1/4") (17/64") (9/32")Bars @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

1.4 13.1 0.20 0.73 13.7 0.24 0.86 10.8 0.28 1.02 11.1 0.33 1.20 11.6 0.38 1.36 11.7 0.45 1.64 11.7 0.52 1.86 11.9 0.59 2.11 12.0 0.66 2.361.5 13.3 0.21 0.75 13.9 0.25 0.89 11.1 0.29 1.06 11.4 0.35 1.25 11.7 0.40 1.43 11.9 0.47 1.70 11.9 0.54 1.93 12.0 0.61 2.19 12.2 0.68 2.452.0 14.1 0.24 0.87 14.5 0.29 1.03 12.1 0.34 1.23 12.4 0.40 1.45 12.4 0.47 1.69 12.6 0.54 1.96 12.6 0.62 2.23 12.7 0.70 2.50 12.9 0.78 2.812.5 14.6 0.27 0.97 15.0 0.32 1.16 12.9 0.38 1.39 13.0 0.46 1.64 13.0 0.53 1.92 13.2 0.61 2.19 13.2 0.69 2.49 13.4 0.78 2.80 13.4 0.87 3.143.0 14.9 0.29 1.05 15.3 0.35 1.27 13.2 0.42 1.52 13.5 0.50 1.81 13.5 0.58 2.10 13.7 0.66 2.39 13.7 0.76 2.72 13.8 0.86 3.08 13.8 0.96 3.443.5 15.1 0.32 1.14 15.7 0.38 1.36 13.6 0.45 1.64 13.7 0.54 1.93 13.7 0.62 2.25 13.9 0.71 2.57 13.9 0.81 2.93 14.0 0.91 3.29 14.0 1.03 3.70

Sprinkler OnlyMetric


L36H A07360


L36AH A07350

Nozzle Only XX = Nozzle SizeMetric | L36H Sprinkler 3.97 mm 4.37 mm 4.76 mm 5.16 mm 3.97 mm 5.56 mm 6.35 mm 6.75 mm 7.14 mm

Plastic Quick-Fit Straight Bore

NozzleQF-SBN-3 107881-XX 10 11 12 13 14 15 16 17 18

Plastic Quick-Fit Low PressureNozzle QF-LPN-3 109247-XX 10 11 12 13 14 15 16 17 18

Metric | L36H Sprinkler 2.78 mm 3.18 mm 3.57 mm

Plastic Quick-Fit Straight BoreNozzle QF-SBN-3 107881-XX 07 08 09

Plastic Quick-Fit Low PressureNozzle QF-LPN-3 109247-XX 07 08 09

Plastic Quick-Fit Plug 10788199 Bold nozzle size numbers denote the most common nozzle choices.

METRIC DATA

PERFORMANCE DATA L36H / L36AH




L36H / L36AHL36AH


PLASTIC STRAIGHT BORE NOZZLE WITH VANE SBN3P WITH SPREADER LAN1* (Stream Height: 7 ft.)

PLASTIC STRAIGHT BORE NOZZLE WITH VANE SBN3P WITH PLUG* (Stream Height: 7 ft.)

NOZZLE SIZE US STANDARD5/32" 11/64" 3/16" 13/64" 7/32"

PSI @ x 3/32"-7˚ x 3/32"-7˚ x 1/8"-7˚ x 1/8"-7˚ x 1/8"-7˚Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM

45 47 6.60 48 7.60 52 10.20 54 11.30 53 12.7050 48 6.90 49 8.00 52 10.70 56 12.00 54 1.3055 49 7.20 50 8.30 53 11.20 57 12.50 55 13.9060 49 7.50 51 8.60 54 11.60 58 13.00 56 14.5065 50 7.80 51 8.90 55 12.00 59 13.50 57 14.9070 50 8.10 52 9.20 56 12.40 60 13.90 58 15.4075 51 8.40 53 9.50 57 12.70 61 14.30 59 15.8080 51 8.60 53 9.70 57 13.00 62 14.70 59 16.20


PSI @Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM

45 47 5.00 48 6.10 52 6.90 54 8.10 53 9.1050 48 5.20 49 6.40 52 7.30 56 8.40 54 9.5055 49 5.40 50 6.50 53 7.70 57 8.80 55 10.0060 49 5.60 51 6.80 54 8.00 58 9.20 56 10.4065 50 5.80 51 7.20 55 8.30 59 9.60 57 10.8070 50 6.10 52 7.50 56 8.70 60 10.10 58 11.1075 51 6.30 53 7.80 57 9.00 61 10.50 59 11.4080 51 6.50 53 8.10 57 9.20 62 10.60 59 11.70


U.S. Standard 3/32" 1/8" 5/32" 11/64" 3/16" 13/64" 7/32"

Brass Straight Bore Nozzle SBN-3 105842-XX – – 10 11 12 13 14

Brass Straight Bore Nozzle with Vane SBN-3V 106131-XX – – 10 11 12 13 14

Plastic Vaned StraightBore Nozzle SBN-3P 71-P00002-XX – – 10 11 12 13 14

Brass 7° Low Angle-Spreader Nozzle LAN-1-7 100225-XX 06 08 – – – – –

Brass 20° Low AngleSpreader Nozzle LAN-1-20 100226-XX 06 08 – – – – –

Brass Plug 100255 Bold nozzle size numbers denote the most common nozzle choices.


Sprinkler without Nozzle or Plug L46000

U.S. STANDARD DATA

PERFORMANCE DATA 46H

46H3/4" 19mm Full Circle, Plastic Impact Sprinkler

Bearing: 3/4" Male NPT, PlasticTrajectory Angle: 23°Operating Range: 45-80 psi 3.0-5.5 barsFlow Rate: 5.0-16.2 GPM 1.12-3.68 m3/hRadius: 47-62 ft. 14.2-18.1 metersRange: One 1/4” Female NPT Nozzle PortSpreader: One 1/8” Female NPT Spreader

Nozzle Port

Features• Durable Delrin™ plastic body,

arm and bearing sleeve • Stainless steel springs and fulcrum pin• Chemically resistant, Teflon™ washers• Brass bearing nipple• Brass or Vaned, plastic nozzles available• Dual nozzle ports • Two-year warranty

Benefits• Teflon™ washers allow for smaller

nozzles and lower pressures• Superior chemical and grit resistance• Exceptionally wide range of flow rates• Built to last




* Nozzles must be purchased separately.

See Chart below.

PLASTIC STRAIGHT BORE NOZZLE WITH VANE SBN3PWITH SPREADER LAN1 * (Stream Height: 2.1m)

PLASTIC STRAIGHT BORE NOZZLE WITH VANE SBN3P*WITH PLUG* (Stream Height: 2.1m)

NOZZLE SIZE METRIC3.97 mm x 2.18 mm 4.37 mm x 2.18 mm 4.76 mm x 3.18 mm 5.16 mm x 3.18 mm 5.56 mm x 3.18 mm

(5/32" x 3/32") 7° (11/64" x 3/32") 7° (3/16" x 1/8") 7° (13/64" x 1/8") 20° (7/32" x 1/8") 20°

BARS @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

3.0 14.2 0.41 1.47 14.6 0.47 1.69 15.7 0.63 2.27 16.5 0.71 2.56 15.9 0.79 2.843.5 14.5 0.44 1.59 15.0 0.51 1.82 16.0 0.68 2.45 17.0 0.76 2.75 16.5 0.85 3.054.0 15.0 0.47 1.68 15.5 0.54 1.93 16.3 0.72 2.60 17.5 0.81 2.92 17.0 0.90 3.244.5 15.2 0.49 1.77 15.7 0.56 2.03 16.7 0.76 2.73 18.0 0.86 3.08 17.5 0.94 3.405.0 15.4 0.52 1.87 16.0 0.59 2.12 17.1 0.79 2.85 18.5 0.89 3.21 17.9 0.99 3.555.5 15.7 0.54 1.96 16.2 0.61 2.20 17.5 0.82 2.95 18.8 0.93 3.33 18.1 1.02 3.68


(5/32") (11/64") (3/16") (13/64") ( 7/32")


3.0 14.2 0.31 1.12 14.6 0.38 1.38 15.7 0.43 1.55 16.5 0.50 1.81 15.9 0.57 2.053.5 14.5 0.33 1.18 15.0 0.40 1.45 16.0 0.47 1.68 17.0 0.54 1.93 16.5 0.60 2.174.0 15.0 0.35 1.25 15.5 0.42 1.51 16.3 0.50 1.80 17.5 0.57 2.06 17.0 0.65 2.334.5 15.2 0.37 1.33 15.7 0.45 1.63 16.7 0.53 1.90 18.0 0.61 2.18 17.5 0.68 2.455.0 15.4 0.39 1.40 16.0 0.48 1.73 17.1 0.56 2.00 18.5 0.64 2.30 17.9 0.71 2.555.5 15.7 0.41 1.48 16.2 0.51 1.84 17.5 0.58 2.10 18.8 0.67 2.41 18.1 0.74 2.66


Sprinkler without Nozzle or Plug L46000


Metric 2.38 mm 3.18 mm 3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.66 mm

Brass Straight Bore Nozzle SBN-3 105842-XX – – 10 11 12 13 14

Brass Straight Bore Nozzle with Vane SBN-3V 106131-XX – – 10 11 12 13 14

Plastic Vaned StraightBore Nozzle SBN-3P 71-P00002-XX – – 10 11 12 13 14




METRIC DATA

PERFORMANCE DATA 46H




46H


BRASS STRAIGHT BORE NOZZLE SBN3 WITH PLUG* (Stream Height: 9 ft.)

BRASS STRAIGHT BORE NOZZLE SBN3 WITH SPREADER LAN1* (Stream Height: 9 ft.)



25 40 2.90 41 3.50 41 4.30 42 5.1030 40 3.10 42 3.90 44 4.70 45 5.6035 41 3.40 43 4.20 45 5.10 47 6.0040 41 3.60 44 4.50 46 5.40 48 6.4045 42 3.80 44 4.70 46 5.70 49 6.8050 42 4.10 45 5.00 47 6.10 50 7.2055 43 4.20 45 5.20 48 6.30 50 7.6060 43 4.40 46 5.50 48 6.60 51 7.9065 44 4.60 46 5.80 49 6.90 51 8.2070 44 4.80 47 5.90 49 7.20 52 8.5075 45 5.00 47 6.10 50 7.40 52 8.8080 45 5.10 48 6.30 50 7.70 53 9.10

BRASS STRAIGHT BORE NOZZLE with VANE SBN3V WITH PLUG* (Stream Height: 10 ft.)



25 42 2.90 44 3.50 45 4.30 48 5.1030 43 3.10 45 3.90 46 4.70 47 5.6035 44 3.40 46 4.20 47 5.10 49 6.0040 45 3.60 47 4.50 48 5.40 50 6.4045 46 3.80 48 4.70 49 5.70 52 6.8050 46 4.10 49 5.00 50 6.10 53 7.2055 47 4.20 50 5.20 51 6.30 53 7.6060 47 4.40 50 5.50 51 6.60 54 7.9065 48 4.60 51 5.80 52 6.90 55 8.2070 48 4.80 51 5.90 53 7.20 55 8.5075 49 5.00 52 6.10 54 7.40 56 8.8080 50 5.10 52 6.30 55 7.70 56 9.10


PSI @ x 3/32-7˚ x 3/32-7˚ x 3/32-7˚ x 3/32-7˚ x 1/8-20˚Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM

25 40 4.20 41 4.80 41 5.60 42 6.40 42 7.4030 40 4.60 42 5.30 44 6.10 45 7.00 45 8.1035 41 4.90 43 5.70 45 6.60 47 7.50 47 8.7040 41 5.20 44 6.10 46 7.00 48 8.10 48 9.3045 42 5.60 44 6.50 46 7.40 49 8.50 49 9.9050 42 5.90 45 6.80 47 7.90 50 9.00 50 10.4055 43 6.10 45 7.10 48 8.20 50 9.40 50 10.9060 43 6.40 46 7.40 48 8.60 51 9.90 51 11.4065 44 6.70 46 7.80 49 8.90 51 10.20 51 11.8070 44 6.90 47 8.10 49 9.30 52 10.70 52 12.3075 45 7.20 47 8.30 50 9.60 52 11.00 52 12.7080 45 7.50 48 8.70 50 10.00 53 11.50 53 13.10

Nozzle Only XX = Nozzle SizeU.S. Standard 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16"

Brass Straight Bore Nozzle

SBN-3 105842-XX – – – 09 10 11 12Brass Straight Bore Nozzle with Vane

SBN-3V 106131-XX – – – 09 10 11 12Brass 7° Low AngleSpreader

LAN-1-7 100225-XX 06 07 08 09 10 – –Brass 20° Low AngleSpreader

LAN-1-20 100226-XX 06 07 08 09 10 – –



Sprinkler Without

Nozzle, Without Plug 30H A08401

Sprinkler without

Nozzle, With Plug 30WH A08411

U.S. STANDARD DATA

PERFORMANCE DATA 30H / 30WH

30H / 30WH3/4" 19 mm Full Circle, Brass Impact Sprinkler

Bearing: 3/4" Male NPT, BrassTrajectory Angle: 27˚Operating Range: 25-80 psi 1.7-5.5 barsFlow Rate: 2.9-13.1 GPM 0.66-2.98 m3/hRadius: 40-56 ft.12.20-17.23 metersRange: One 1/4” Female NPT Nozzle PortSpreader: One 1/8” Female NPT Spreader

Nozzle Port

Features• Heavy duty brass construction• Stainless steel springs and fulcrum pin• Chemically resistant washers• Dual nozzle ports• Two-year warranty• 30H unit does not have a spreader plug• 30WH unit has spreader plug

Benefits• Wide range of flow rates• Corrosion and grit resistant• Built to last




BRASS STRAIGHT BORE NOZZLE with VANE SBN3V WITH SPREADER LAN1* (Stream Height: 10 ft.)



25 42 4.20 44 4.80 45 5.60 45 6.40 46 7.4030 43 4.60 45 5.30 46 6.10 47 7.00 47 8.1035 44 4.90 46 5.70 47 6.60 49 7.50 49 8.7040 45 5.20 47 6.10 48 7.00 50 8.10 50 9.3045 46 5.60 48 6.50 49 7.40 52 8.50 52 9.9050 46 5.90 49 6.80 50 7.90 53 9.00 53 10.4055 47 6.10 50 7.10 51 8.20 54 9.40 54 10.9060 47 6.40 50 7.40 51 8.60 54 9.90 54 11.4065 48 6.70 51 7.80 52 8.90 55 10.20 55 11.8070 48 6.90 51 8.10 53 9.30 55 10.70 55 12.3075 49 7.20 52 8.30 54 9.60 56 11.00 56 12.7080 50 7.50 52 8.70 55 10.00 56 11.50 56 13.10

30H


Nozzle Only XX = Nozzle SizeMetric 2.38 mm 2.78 mm 3.18 mm 3.57 mm 3.97 mm 4.37 mm 4.76 mm

Brass Straight Bore Nozzle

SBN-3 105842-XX – – – 09 10 11 12Brass Straight Bore Nozzle with Vane

SBN-3V 106131-XX – – – 09 10 11 12Brass 7° Low AngleSpreader

LAN-1-7 100225-XX 06 07 08 09 10 – –Brass 20° Low AngleSpreader

LAN-1-20 100226-XX 06 07 08 09 10 – –



Sprinkler Without

Nozzle, Without Plug 30H A08401

Sprinkler without

Nozzle, With Plug 30WH A08411

METRIC DATA

PERFORMANCE DATA 30H / 30WH




30H / 30WH

30H BRASS STRAIGHT BORE NOZZLE SBN3 WITH PLUG * (Stream Height: 3m)

NOZZLE SIZE METRIC3.57 MM 3.97 MM 4.37 MM 4.76 MM

(9/64") (5/32") (11/64") (3/16")BARS @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

1.7 12.2 0.18 0.66 12.5 0.22 0.79 12.6 0.27 0.98 13.0 0.32 1.162.0 12.3 0.19 0.69 12.9 0.24 0.87 13.3 0.29 1.05 13.7 0.35 1.252.5 12.5 0.22 0.78 13.3 0.27 0.97 13.8 0.33 1.18 14.4 0.38 1.393.0 12.8 0.24 0.85 13.5 0.29 1.05 14.1 0.35 1.27 14.8 0.42 1.523.5 13.0 0.26 0.93 13.7 0.32 1.14 14.5 0.39 1.39 15.3 0.46 1.654.0 13.2 0.27 0.98 14.0 0.34 1.22 14.7 0.41 1.47 15.5 0.49 1.774.5 13.4 0.29 1.05 14.2 0.37 1.32 14.9 0.44 1.57 15.7 0.52 1.875.0 13.6 0.31 1.11 14.4 0.38 1.36 15.2 0.46 1.66 15.9 0.55 1.965.5 13.9 0.32 1.16 14.6 0.40 1.43 15.4 0.49 1.75 16.2 0.57 2.07

30H BRASS STRAIGHT BORE NOZZLE SBN3 WITH SPREADER LAN1* (Stream Height: 1.1m)


BARS @ (9/64" x 3/32") 7° (5/32" x 3/32") 7° (11/64" x 3/32") 7° (3/16" x 3/32") 7° (3/16" x 1/8") 20°Nozzle Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow

(m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)1.7 12.2 0.26 0.95 12.5 0.30 1.09 12.6 0.35 1.27 13.0 0.40 1.45 13.0 0.47 1.682.0 12.3 0.29 1.03 12.9 0.33 1.18 13.3 0.38 1.36 13.7 0.43 1.56 13.7 0.50 1.812.5 12.5 0.31 1.13 13.3 0.37 1.32 13.8 0.42 1.52 14.4 0.48 1.74 14.4 0.56 2.013.0 12.8 0.35 1.24 13.5 0.40 1.45 14.1 0.46 1.65 14.8 0.53 1.90 14.8 0.61 2.213.5 13.0 0.37 1.35 13.7 0.43 1.55 14.5 0.50 1.80 15.3 0.57 2.06 15.3 0.66 2.384.0 13.2 0.40 1.43 14.0 0.46 1.65 14.7 0.53 1.92 15.5 0.61 2.20 15.5 0.71 2.544.5 13.4 0.42 1.52 14.2 0.49 1.77 14.9 0.56 2.03 15.7 0.64 2.32 15.7 0.75 2.695.0 13.6 0.44 1.60 14.4 0.52 1.86 15.2 0.60 2.15 15.9 0.68 2.46 15.9 0.79 2.845.5 13.9 0.47 1.70 14.6 0.55 1.98 15.4 0.63 2.27 16.2 0.73 2.61 16.2 0.83 2.98

30H BRASS STRAIGHT BORE NOZZLE with VANE SBN3V WITH SPREADER LAN1* (Stream Height: 3m)


BARS @ (9/64" x 3/32") 7° (5/32" x 3/32") 7° (11/64" x 3/32") 7° (3/16" x 3/32") 7° (3/16" x 1/8") 20°Nozzle Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow

(m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h)1.7 13.0 0.26 0.95 13.4 0.30 1.09 13.9 0.35 1.27 13.9 0.40 1.45 13.9 0.47 1.682.0 13.2 0.29 1.03 13.7 0.33 1.18 14.0 0.38 1.36 14.4 0.43 1.56 14.4 0.50 1.812.5 13.6 0.31 1.13 14.1 0.37 1.32 14.4 0.42 1.52 15.0 0.48 1.74 15.0 0.56 2.013.0 14.0 0.35 1.24 14.5 0.40 1.45 14.8 0.46 1.65 15.7 0.53 1.90 15.7 0.61 2.213.5 14.2 0.37 1.35 15.0 0.43 1.55 15.3 0.50 1.80 16.2 0.57 2.06 16.2 0.66 2.384.0 14.4 0.40 1.43 15.3 0.46 1.65 15.6 0.53 1.92 16.5 0.61 2.20 16.5 0.71 2.544.5 14.6 0.42 1.52 15.6 0.49 1.77 15.9 0.56 2.03 16.8 0.64 2.32 16.8 0.75 2.695.0 14.9 0.44 1.60 15.8 0.52 1.86 16.3 0.60 2.15 17.0 0.68 2.46 17.0 0.79 2.845.5 15.2 0.47 1.70 16.0 0.55 1.98 16.8 0.63 2.27 17.2 0.73 2.61 17.2 0.83 2.98

30H BRASS STRAIGHT BORE NOZZLE with VANE SBN3V WITH PLUG* (Stream Height: 3m)

NOZZLE SIZE METRIC3.57 MM 3.97 MM 4.37 MM 4.76 MM


1.7 13.0 0.18 0.66 13.4 0.22 0.79 13.7 0.27 0.98 14.0 0.32 1.162.0 13.2 0.19 0.69 13.7 0.24 0.87 14.0 0.29 1.05 14.4 0.35 1.252.5 13.6 0.22 0.78 14.1 0.27 0.97 14.4 0.33 1.18 15.0 0.38 1.393.0 14.0 0.24 0.85 14.5 0.29 1.05 14.8 0.35 1.27 15.7 0.42 1.523.5 14.2 0.26 0.93 15.0 0.32 1.14 15.3 0.39 1.39 16.2 0.46 1.654.0 14.4 0.27 0.98 15.3 0.34 1.22 15.6 0.41 1.47 16.5 0.49 1.774.5 14.6 0.29 1.05 15.6 0.37 1.32 15.9 0.44 1.57 16.8 0.52 1.875.0 14.9 0.31 1.11 15.8 0.38 1.36 16.3 0.46 1.66 17.0 0.55 1.965.5 15.2 0.32 1.16 16.0 0.40 1.43 16.8 0.49 1.75 17.2 0.57 2.07

30WH



30PWH3/4" 19mm Full Circle, Aluminum Arm Impact Sprinkler

Bearing: 3/4" Male NPT, BrassTrajectory Angle: 27°Operating Range: 25-80 psi 1.7-5.5 barsFlow Rate: 1.7-5.5 GPM 0.39-1.22 m3/hRadius: 38-46 ft. 11.74-14.03 metersRange: One 1/4” Female NPT Nozzle PortSpreader: One 1/8” Female NPT Spreader

Nozzle Port

Features• Durable die-cast, anodized, aluminum arm • Stainless steel springs and fulcrum pin• Chemically resistant washers• Two-year warranty

Benefits• Aluminum arm allows for smaller nozzles

and lower pressures• Wide range of flow rates• Corrosion and grit resistant• Built to last

30PWHPERFORMANCE DATA


Nozzle Only XX = NOZZLE SIZEU.S. Standard 7/64" 1/8" 9/64" 5/32"

Metric 2.78 mm 3.18 mm 3.57 mm 3.97 mm


Brass Straight Bore Nozzle withVane SBN-3V 106131-XX 07 08 09 10


Sprinkler Only

Sprinkler without Nozzle with Plug A11355

STRAIGHT BORE NOZZLE SBN3* (Stream Height: 9 ft.)



25 38 1.70 39 2.30 40 2.90 41 3.5030 39 1.90 39 2.50 40 3.20 42 3.9035 39 2.10 40 2.70 41 3.40 43 4.2040 39 2.20 40 2.90 41 3.60 44 4.5045 40 2.30 41 3.10 42 3.80 44 4.7050 40 2.40 41 3.20 42 4.00 45 5.0055 40 2.60 42 3.40 43 4.20 45 5.2060 41 2.70 42 3.60 43 4.40 46 5.5065 41 2.80 43 3.70 44 4.70 - -70 41 2.90 43 3.80 44 4.80 - -75 41 3.00 43 4.00 - - - -80 42 3.10 43 4.10 - - - -



(7/64") (1/8") (9/64") (5/32")BARS @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h)

1.7 11.7 0.11 0.39 11.9 0.15 0.52 12.2 0.18 0.66 12.5 0.22 0.792.0 11.9 0.12 0.42 12.0 0.16 0.56 12.3 0.20 0.71 12.9 0.24 0.872.5 11.9 0.13 0.48 12.2 0.17 0.62 12.5 0.22 0.78 13.3 0.27 0.973.0 12.1 0.14 0.52 12.5 0.19 0.69 12.8 0.24 0.85 13.5 0.29 1.053.5 12.2 0.15 0.55 12.7 0.20 0.73 13.0 0.25 0.92 13.7 0.32 1.144.0 12.4 0.17 0.60 12.9 0.22 0.80 13.2 0.27 0.98 14.0 0.34 1.224.5 12.5 0.18 0.64 13.1 0.23 0.84 13.4 0.30 1.07 - - -5.0 12.6 0.19 0.67 13.2 0.25 0.89 - - - - - -5.5 12.8 0.20 0.70 13.3 0.26 0.93 - - - - - -




See Chart below.




14070H3/4" 19mm Full Circle, Brass Impact Sprinkler

Bearing: 3/4" Male NPT, BrassTrajectory Angle: 27°Operating Range: 25-80 psi 1.7-5.5 barsFlow Rate: 4.2-23 GPM 0.97-5.34 m3/hRadius: 44-71 ft. 13.57-22.10 metersRange: One 1/4” Female NPT Nozzle PortSpreader: One 1/8” Female NPT Spreader

Nozzle Port

Features• Heavy duty brass construction• Extra large body and barrel• Stainless steel springs and fulcrum pin• Chemically resistant washers• Dual nozzle ports• Two-year warranty

Benefits• Extra large body accommodates wide

range of flow rates and nozzles • Long nozzle barrel increases

distance of throw• Corrosion and grit resistant• Built to last

14070HPERFORMANCE DATA

U.S. STANDARD DATA

Sprinkler OnlyU.S. Standard Sprinkler without Nozzlewithout Plug A12800

Nozzle Only XX = Nozzle SizeU.S. Standard 1/8" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32"

Brass Straight BoreNozzle SBN-3 105842-XX – 10 11 12 13 14 15 16 17 18Brass Straight BoreNozzle with Vane SBN-3V 106131-XX – 10 11 12 13 14 15 16 17 18Brass 20° Low AngleSpreader Nozzle LAN-1-20 100226-XX 08 – – – – – – – – –Brass Plug 100255 Bold nozzle size numbers denote the most common nozzle choices.

NOZZLE SIZE US STANDARD3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32"

PSI @ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM

25 47 7.40 49 8.30 51 9.20 51 9.80 51 10.80 51 11.90 51 13.1030 50 8.10 51 9.10 54 10.10 54 10.60 55 11.80 55 13.00 55 14.3035 51 8.70 53 9.80 55 10.90 56 11.50 57 12.70 57 14.10 57 15.5040 52 9.30 54 10.50 56 11.70 57 12.40 59 13.70 59 15.00 60 16.5045 53 9.90 55 11.10 57 12.40 59 13.10 60 14.40 61 16.00 62 17.6050 53 10.40 56 11.70 58 13.10 60 13.80 62 15.30 63 16.80 64 18.5055 54 10.90 56 12.30 59 13.70 61 14.40 63 16.10 65 17.70 66 19.4060 55 11.40 57 12.80 60 14.30 62 15.10 64 16.70 67 18.40 68 20.2065 55 11.90 58 13.30 61 14.90 63 15.70 65 17.40 68 19.20 69 21.1070 56 12.40 58 13.80 62 15.40 64 16.30 66 18.10 69 20.00 71 21.9075 56 12.80 59 14.30 62 16.00 65 16.90 67 18.70 - - - -80 57 13.20 60 14.80 63 16.50 66 17.50 69 19.30 - - - -

STRAIGHT BORE NOZZLE SBN3 WITH SPREADER LAN120* (Stream Height: 10 ft.)

STRAIGHT BORE NOZZLE SBN3V WITH PLUG* (Stream Height: 10 ft.)



25 - - - - 44 5.10 45 6.00 46 7.00 46 8.00 47 9.10 48 10.30 48 11.5030 - - - - 47 5.60 48 6.60 49 7.60 50 8.80 51 10.00 51 11.20 52 12.6035 46 4.20 47 5.10 49 6.10 50 7.10 51 8.20 52 9.50 52 10.80 53 12.10 54 13.6040 46 4.50 48 5.40 50 6.50 51 7.60 52 8.80 53 10.10 54 11.50 55 13.00 56 14.6045 47 4.80 49 5.80 51 6.90 52 8.10 54 9.30 55 10.70 56 12.20 57 13.80 58 15.4050 48 5.00 50 6.10 52 7.20 53 8.50 55 9.80 56 11.30 57 12.90 58 14.50 59 16.3055 48 5.30 50 6.40 53 7.60 54 8.90 56 10.30 54 11.80 59 13.50 59 15.20 61 17.1060 49 5.50 51 6.70 53 7.90 55 9.30 57 10.80 58 12.40 60 14.10 61 15.90 62 17.8065 49 5.70 52 6.90 54 8.30 56 9.70 58 11.20 59 12.90 61 14.70 62 16.50 63 18.5070 50 5.90 52 7.20 55 8.60 57 10.00 59 11.60 60 13.40 62 15.20 63 17.20 65 19.2075 50 6.20 53 7.40 55 8.90 58 10.40 60 12.10 61 13.80 63 15.70 - - - -80 50 6.40 53 7.70 56 9.10 58 10.70 61 12.40 62 14.30 64 16.30 - - - -


PSI @ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚

Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM

25 44 7.40 45 8.30 46 9.20 46 10.30 47 11.40 47 12.50 48 13.8030 47 8.10 48 9.10 49 10.10 50 11.20 51 12.40 51 13.70 52 15.1035 49 8.70 50 9.80 51 10.90 52 12.10 52 13.40 53 14.80 54 16.3040 50 9.30 51 10.50 52 11.70 53 13.00 54 14.40 55 15.80 56 17.4045 51 9.90 52 11.10 54 12.40 55 13.80 56 15.20 57 16.80 58 18.5050 52 10.40 53 11.70 55 13.10 56 14.50 57 16.10 58 17.70 59 19.5055 53 10.90 54 12.30 56 13.70 57 15.20 59 16.90 59 18.60 61 20.4060 53 11.40 55 12.80 57 14.30 58 15.90 60 17.60 61 19.40 62 21.3065 54 11.90 56 13.30 58 14.90 59 16.50 61 18.30 62 20.20 63 22.2070 55 12.40 57 13.80 59 15.40 60 17.20 62 19.00 63 21.00 65 23.0075 55 12.80 58 14.30 60 16.00 61 17.80 63 19.70 - - - -80 56 13.20 58 14.80 61 16.50 62 18.40 64 20.30 - - - -

STRAIGHT BORE NOZZLE WITH VANE SBN3V WITH SPREADER LAN1* (Stream Height: 10 ft.)

* Nozzles mustbe purchased separately.See Chart below.

14070HPERFORMANCE DATA

METRIC DATA




Sprinkler OnlyMetricSprinkler without Nozzlewithout Plug A12800

Nozzle Only XX = Nozzle SizeMetric 3.18 mm 3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.56 mm 5.95 mm 6.35 mm 6.75 mm 7.14 mm

Brass Straight BoreNozzle SBN-3 105842-XX – 10 11 12 13 14 15 16 17 18Brass Straight BoreNozzle with Vane SBN-3V 106131-XX – 10 11 12 13 14 15 16 17 18Brass 20° Low AngleSpreader Nozzle LAN-1-20 100226-XX 08 – – – – – – – – –Brass Plug 100255 Bold nozzle size numbers denote the most common nozzle choices.

STRAIGHT BORE NOZZLE SBN3 WITH PLUG* (Stream Height: 3m)


(5/32") (11/64") (3/16") (13/64") (7/32") (15/64") (1/4") (17/64") (9/32")BARS @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h)

1.7 - - - - - - 13.6 0.32 1.16 13.9 0.38 1.36 14.0 0.44 1.59 14.2 0.50 1.82 14.3 0.57 2.07 14.5 0.65 2.34 14.6 0.73 2.612.0 - - - - - - 14.3 0.35 1.25 14.6 0.41 1.47 14.9 0.47 1.70 15.0 0.54 1.96 15.3 0.62 2.23 15.4 0.70 2.50 15.6 0.78 2.812.5 14.1 0.27 0.97 14.4 0.33 1.18 15.0 0.39 1.41 15.4 0.46 1.64 15.7 0.53 1.90 16.0 0.61 2.19 16.2 0.69 2.49 16.4 0.78 2.80 16.6 0.87 3.143.0 14.3 0.30 1.07 14.8 0.36 1.29 15.5 0.43 1.54 15.9 0.50 1.81 16.3 0.58 2.08 16.6 0.66 2.39 16.9 0.76 2.72 17.2 0.86 3.08 17.5 0.96 3.443.5 14.7 0.32 1.15 15.3 0.39 1.40 15.9 0.46 1.65 16.4 0.54 1.94 16.8 0.62 2.24 17.1 0.72 2.58 17.6 0.82 2.95 17.9 0.92 3.32 18.2 1.04 3.734.0 14.9 0.34 1.23 15.5 0.42 1.49 16.2 0.49 1.77 16.8 0.58 2.08 17.4 0.67 2.41 17.7 0.77 2.76 18.2 0.87 3.15 18.4 0.99 3.55 18.9 1.11 3.984.5 15.1 0.36 1.30 15.9 0.44 1.57 16.6 0.52 1.89 17.2 0.61 2.21 17.8 0.71 2.55 18.1 0.82 2.93 18.6 0.93 3.34 19.1 1.04 3.75 19.4 1.17 4.215.0 15.2 0.38 1.37 16.1 0.46 1.66 16.8 0.55 1.99 17.5 0.64 2.32 18.1 0.75 2.69 18.6 0.86 3.09 19.1 0.97 3.51 19.6 1.10 3.97 19.8 1.23 4.425.5 15.4 0.40 1.45 16.3 0.49 1.75 17.2 0.57 2.07 17.8 0.68 2.43 18.6 0.78 2.82 19.1 0.90 3.25 19.7 1.03 3.70 - - - - - -

STRAIGHT BORE NOZZLE SBN3 WITH SPREADER LAN120* (Stream Height: 3m)

NOZZLE SIZE METRIC4.76 mm x 3.18 mm 5.16 mm x 3.18 mm 5.56 mm x 3.18 mm 5.95 mm x 3.18 mm 6.35 mm x 3.18 mm 6.75 mm x 3.18 mm 7.14 mm x 3.18 mm

(3/16" x 1/8") 20° (13/64" x 1/8") 20° (7/32" x 1/8") 20° (15/64" x 1/8") 20° (1/4" x 1/8") 20° (17/64" x 1/8") 20° (9/32" x 1/8") 20°BARS @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h)

1.7 13.6 0.47 1.68 13.9 0.52 1.89 14.0 0.58 2.09 14.2 0.65 2.34 14.3 0.72 2.59 14.5 0.79 2.84 14.6 0.87 3.13 2.0 14.3 0.50 1.81 14.6 0.56 2.03 14.9 0.63 2.25 15.0 0.70 2.50 15.3 0.77 2.77 15.4 0.85 3.06 15.6 0.94 3.372.5 15.0 0.56 2.01 15.4 0.63 2.26 15.7 0.70 2.52 16.0 0.78 2.80 16.2 0.86 3.10 16.4 0.95 3.42 16.6 1.05 3.763.0 15.5 0.61 2.21 15.9 0.69 2.48 16.3 0.77 2.77 16.6 0.86 3.08 16.9 0.94 3.40 17.2 1.04 3.75 17.5 1.15 4.133.5 15.9 0.66 2.38 16.4 0.74 2.68 16.8 0.83 3.00 17.1 0.92 3.32 17.6 1.02 3.68 17.9 1.12 4.05 18.2 1.24 4.464.0 16.2 0.71 2.54 16.8 0.79 2.86 17.4 0.89 3.19 17.7 0.99 3.55 18.2 1.09 3.93 18.4 1.20 4.33 18.9 1.32 4.754.5 16.6 0.75 2.71 17.2 0.84 3.03 17.8 0.94 3.39 18.1 1.04 3.75 18.6 1.16 4.16 19.1 1.28 4.60 19.4 1.40 5.055.0 16.8 0.79 2.86 17.5 0.89 3.19 18.1 0.99 3.56 18.6 1.10 3.97 19.1 1.22 4.39 19.6 1.35 4.86 19.9 1.48 5.345.5 17.2 0.83 3.00 17.8 0.93 3.36 18.6 1.04 3.75 19.1 1.16 4.18 19.7 1.28 4.61 - - - - - -

STRAIGHT BORE NOZZLE WITH VANE SBN3V WITH SPREADER LAN1* (Stream Height: 3m)


(3/16" x 1/8") 20° (13/64" x 1/8") 20° (7/32" x 1/8") 20° (15/64" x 1/8") 20° (1/4" x 1/8") 20° (17/64" x 1/8") 20° (9/32" x 1/8") 20°BARS @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h) (m) (lps) ( m3/h)

1.7 14.5 0.47 1.68 14.9 0.52 1.89 15.5 0.58 2.09 15.5 0.62 2.23 15.7 0.68 2.45 15.5 0.75 2.70 15.5 0.83 2.982.0 15.1 0.50 1.81 15.5 0.56 2.03 16.3 0.63 2.25 16.4 0.66 2.37 16.5 0.73 2.63 16.5 0.81 2.90 16.5 0.89 3.192.5 15.6 0.56 2.01 16.2 0.63 2.26 17.0 0.70 2.52 17.2 0.74 2.66 17.5 0.82 2.94 17.7 0.90 3.25 17.7 0.99 3.583.0 16.1 0.61 2.21 16.7 0.69 2.48 17.4 0.77 2.77 17.8 0.81 2.93 18.3 0.90 3.22 18.6 0.99 3.56 18.7 1.09 3.923.5 16.4 0.66 2.38 17.1 0.74 2.68 17.9 0.83 3.00 18.4 0.88 3.15 18.9 0.97 3.50 19.3 1.07 3.85 19.6 1.18 4.234.0 16.7 0.71 2.54 17.4 0.79 2.86 18.3 0.89 3.19 18.9 0.93 3.37 19.5 1.04 3.74 20.1 1.14 4.11 20.5 1.25 4.514.5 16.9 0.75 2.71 17.7 0.84 3.03 18.8 0.94 3.39 19.4 0.99 3.57 20.0 1.10 3.96 20.7 1.21 4.37 21.2 1.33 4.805.0 17.1 0.79 2.86 17.9 0.89 3.19 19.0 0.99 3.56 19.7 1.05 3.77 20.4 1.16 4.18 21.3 1.28 4.62 22.1 1.40 5.055.5 17.4 0.83 3.00 18.3 0.93 3.36 19.4 1.04 3.75 20.1 1.10 3.97 21.0 1.22 4.38 - - - - - -

14070H

* Nozzles mustbe purchased separately.See Chart below.



L3030H3/4" 19 mm Full Circle, Brass, Low Angle Impact Sprinkler

Bearing: 3/4" Male NPT, BrassTrajectory Angle: 10°Operating Range: 40-60 psi 2.8-4.1 barsFlow Rate: 3.6-15.9 GPM .082-3.61m3/hRadius: 42-48 ft. 13.0-14.5mTwo 1/4” Female NPT Nozzle Ports

Features• Heavy duty brass construction • Stainless steel springs and


Benefits• Low angle fights strong

wind conditions• Great choice for pivot or

under tree applications• Corrosion and grit resistant• Built to last

L3030HPERFORMANCE DATA


STRAIGHT BORE NOZZLE SBN3*



40 42 3.60 43 4.40 43 5.30 44 6.30 45 7.60 45 8.90 45 10.00 45 11.40 45 12.4045 43 3.80 43 4.70 44 5.60 45 6.60 45 8.10 45 9.40 45 10.60 46 12.10 46 13.1050 43 4.00 44 4.90 45 5.90 45 7.00 46 8.50 46 9.90 46 11.10 46 12.80 46 13.8055 44 4.20 45 5.20 45 6.20 45 7.30 46 8.90 46 10.30 46 11.80 47 13.50 47 15.2060 45 4.40 45 5.40 45 6.50 46 7.80 46 9.30 47 10.80 47 12.40 47 14.10 48 15.90

Note: Performance data taken using 10’ riserPart Numbers and Ordering Information

STRAIGHT BORE NOZZLE SBN3*NOZZLE SIZE METRIC

3.57 mm 3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.56 mm 5.95 mm 6.35 mm 6.75 mm(9/64") (5/32") (11/64") (3/16") (13/64") (7/32") (15/64") (1/4") (17/64")

Bars @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Nozzle (m) (lps) (m3/h) (m) (lps)(m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

2.8 13.0 0.23 0.82 13.3 0.28 1.00 13.3 0.33 1.20 13.6 0.40 1.43 13.7 0.48 1.73 13.7 0.56 2.02 13.7 0.63 2.27 13.9 0.72 2.59 13.9 0.78 2.82 3.0 13.1 0.24 0.85 13.5 0.29 1.05 13.5 0.35 1.25 13.7 0.41 1.48 13.8 0.50 1.81 13.8 0.58 2.10 13.8 0.66 2.37 14.0 0.75 2.70 14.0 0.81 2.933.5 13.3 0.25 0.91 13.6 0.31 1.11 13.7 0.37 1.34 13.9 0.44 1.59 14.0 0.54 1.93 14.0 0.62 2.25 14.0 0.70 2.52 14.2 0.81 2.91 14.2 0.87 3.134.0 13.7 0.27 0.98 13.8 0.34 1.21 13.8 0.40 1.45 14.0 0.48 1.73 14.1 0.58 2.08 14.2 0.67 2.41 14.3 0.77 2.76 14.3 0.87 3.15 14.4 0.99 3.554.1 13.7 0.28 1.00 13.9 0.34 1.23 13.9 0.41 1.48 14.0 0.49 1.77 14.2 0.59 2.11 14.3 0.68 2.45 14.3 0.78 2.82 14.3 0.89 3.20 14.5 1.00 3.61

Nozzle Only XX = NOZZLE SIZEU.S. Standard 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32"

Metric 3.57 mm 3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.56 mm 5.95 mm 6.35 mm 6.75 mm 7.14 mm

Brass StraightBore Nozzle SBN-3 105842-XX 09 10 11 12 13 14 15 16 17 –


Sprinkler Only

Sprinkler without Nozzles orPlugs A11640

Flow rates reflect singl nozzle configuration.


See Chart below.


30FH / 30FWH3/4" 19mm Full Circle, Brass Impact Sprinkler

Bearing: 3/4" Male NPT, BrassTrajectory Angle: 27°Operating Range: 25-80 psi 1.7-5.5 barsFlow Rate: 2.26-6.47 GPM 0.51-1.47 m3/hRadius: 39-43 ft. 11.90-13.27 metersOne 1/4” Female NPT Nozzle PortOne 1/8” Female NPT Spreader Nozzle Port

Features• Heavy duty brass construction • Stainless steel springs and fulcrum pin• Chemically resistant,

Teflon™ washers• Dual nozzle ports• Two-year warranty

Benefits• Teflon washers allow for smaller nozzles

and lower pressures• Wide range of flow rates• Corrosion and grit resistant• Built to last

30FH / 30FWHPERFORMANCE DATA


Sprinkler On ly

Sprinkler without Nozzle 30FH A08401FSprinkler without Nozzlewith Plug 30FWH A08901F



NOZZLE SIZE US STANDARD1/8"

PSI @ x 3/32-20˚Nozzle Rad. GPM

25 39 3.5230 39 3.8735 40 4.1940 40 4.4945 41 4.7750 41 5.0255 42 5.2760 42 5.5165 43 5.7570 43 5.9975 43 6.2380 43 6.47


PSI @Nozzle Rad. GPM

25 39 2.2630 39 2.4835 40 2.6840 40 2.8645 41 3.0350 41 3.2055 42 3.3560 44 3.5065 43 3.6570 43 3.7875 43 3.9180 43 4.04


STRAIGHT BORE NOZZLE SBN3 WITH SPREADER LAN120* (Stream Height: 2.7m)

NOZZLE SIZE METRIC3.18 mm x 2.38 mm

(1/8" x 3/32”) 20°BARS @ Rad. Flow FlowNozzle (m) (lps) (m3/h)

1.7 11.9 0.22 0.802.0 12.0 0.24 0.862.5 12.2 0.27 0.973.0 12.5 0.30 1.063.5 12.7 0.32 1.154.0 12.9 0.34 1.234.5 13.1 0.36 1.315.0 13.2 0.39 1.395.5 13.3 0.41 1.47

NOZZLE SIZE METRIC3.18 mm

(1/8")BARS @ Rad. Flow FlowNozzle (m) (lps) (m3/h)

1.7 11.9 0.14 0.512.0 12.0 0.15 0.552.5 12.2 0.17 0.623.0 12.5 0.19 0.683.5 12.7 0.20 0.734.0 12.9 0.22 0.784.5 13.1 0.23 0.835.0 13.2 0.24 0.875.5 13.3 0.25 0.92

Nozzle Only XX = Nozzle SizeU.S. Standard 3/32" 1/8"

Metric 2.38 mm 3.18 mm

Brass Straight Bore Nozzle1/8"

SBN-3 105842-XX – 08

Brass 20" Low Angle Nozzle 3/32°

LAN-1-20 100226-XX 06 –






70CH / 70CHM1" 25 mm Full Circle, Brass Impact Sprinkler

Bearing: 1" Female NPT, Brass (70CH)Bearing: 1" Male NPT, Brass (70CHM)Trajectory Angle: 21°Operating Range: 40-80 psi 2.8-5.5 barsFlow Rate: 8.8-45.8 GPM 2.00-10.40 m3/hRadius: 57-82 ft. 17.39-25.01 metersTwo 3/8” Female NPT Nozzle Ports(Spreader Nozzle Port requires SpreaderBushing to accept LAN-20 Nozzles)

Features• Heavy duty brass construction• 70CH 1" Female NPT Bearing• 70CHM has 1” Male bearing Integral

Straightening Vanes• Stainless steel springs and fulcrum pin• Chemically resistant washers• Dual nozzle ports• Two-year warranty

Benefits• Integral straightening vanes increase

distance of throw• Wide range of flow rates• Corrosion and grit resistant• Built to last

PERFORMANCE DATA

U.S. STANDARD DATA

70CH / 70CHM

STRAIGHT BORE NOZZLE SBN4 WITH PLUG* (Stream Height: 8 ft.)


PSI @Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM

40 57 8.80 60 11.50 62 14.60 65 17.70 66 21.10 68 24.40 70 28.5045 58 9.40 61 12.20 64 15.50 66 18.90 68 22.50 70 26.00 72 30.4050 59 9.90 62 12.90 65 16.30 68 20.00 70 23.80 71 27.50 73 32.3055 60 10.40 63 13.60 66 17.20 70 21.00 71 25.00 73 29.10 75 34.0060 61 10.90 64 14.20 67 18.00 71 22.00 73 26.20 74 30.60 77 35.7065 62 11.40 65 14.80 68 18.80 72 23.00 74 27.40 76 32.00 78 37.3070 63 11.80 66 15.40 70 19.50 73 23.90 76 28.50 77 33.20 79 38.9075 64 12.20 67 16.00 71 20.30 74 24.80 77 29.60 78 34.50 81 40.4080 65 12.60 68 16.50 72 20.90 75 25.70 78 30.60 80 35.70 82 41.80



PSI @ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚ x 1/8-20˚

Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM

40 57 11.60 60 14.30 62 17.40 65 20.50 61 23.90 68 27.20 70 31.4045 58 12.40 61 15.20 64 18.50 66 21.90 68 25.50 70 29.00 72 33.4050 59 13.00 62 16.00 65 19.40 68 23.10 70 26.90 71 30.60 73 35.5055 60 13.70 63 16.90 66 20.40 70 24.30 71 28.30 73 32.40 75 37.4060 61 14.30 64 17.60 67 21.40 71 25.40 73 29.60 74 34.00 77 39.2065 62 15.00 65 18.40 69 22.40 72 26.60 74 31.00 76 35.60 78 40.9070 63 15.50 66 19.10 70 23.20 73 27.60 75 32.20 77 36.90 79 42.7075 64 16.00 67 19.80 71 24.10 74 28.60 77 33.40 78 38.30 81 44.3080 65 16.50 68 20.40 72 24.80 75 29.60 78 34.50 80 39.60 82 45.80


Sprinkler without Nozzle,Without Plug,Without Bushing;Female body (70CH)

A20000

Sprinkler without Nozzle,Without Plug,Without Bushing;Male body (70CHM)

A20030


U.S. Standard 1/8" 7/32" 1/4" 9/32" 5/16" 11/32" 3/8" 13/32"

Brass Straight BoreNozzle SBN-4 100382-XX – 14 16 18 20 22 24 26Brass SpreaderBushing SPB-1 100418 Needed for use with LAN -1-20

Brass 20° Low AngleSpreader Nozzle LAN-1-20 100226 08 – – – – – – –



Full Circle Impact Sprinklers1 " (25 mm) Sprinklers



70CH / 70CHMPERFORMANCE DATA

METRIC DATA


Sprinkler without Nozzle,Without Plug,Without Bushing;Female body (70CH)

A20000

Sprinkler without Nozzle,Without Plug,Without Bushing;Male body (70CHM)

A20030


Metric 1.59 mm 1.70mm 1.78 mm 1.98 mm 2.18 mm 2.38 mm 2.78 mm 3.18 mm

Brass Straight BoreNozzle SBN-4 100382-XX – 14 16 18 20 22 24 26Brass SpreaderBushing SPB-1 100418 Needed for use with LAN -1-20

Brass 20° Low AngleSpreader Nozzle LAN-1-20 100226 08 – – – – – – –


STRAIGHT BORE NOZZLE SBN4 WITH PLUG* (Stream Height: 2.4m)

Straight Bore Nozzle (SBN-4) with Spreader (LAN-1-20)* (Stream Height: 2.4m)

NOZZLE SIZE METRIC5.56 mm 6.35 mm 7.14 mm 7.94 mm 8.73 mm 9.53 mm 10.32 mm

BARS @(7/32") (1/4") (9/32") (5/16") (11/32") (3/8") (13/32")

Nozzle Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow(m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

2.8 17.4 0.56 2.00 18.3 0.73 2.61 19.1 0.92 3.32 19.8 1.12 4.02 20.3 1.33 4.79 20.7 1.54 5.54 21.3 1.80 6.473.0 17.7 0.58 2.09 18.5 0.76 2.72 19.4 0.96 3.46 20.1 1.17 4.21 20.6 1.39 5.01 21.2 1.61 5.79 21.8 1.88 6.773.5 18.2 0.63 2.26 18.9 0.82 2.95 20.0 1.04 3.73 20.8 1.27 4.58 21.4 1.51 5.45 21.9 1.75 6.30 22.5 2.05 7.394.0 18.6 0.67 2.43 19.4 0.88 3.17 20.5 1.12 4.01 21.6 1.36 4.90 22.1 1.62 5.84 22.5 1.89 6.81 23.3 2.21 7.954.5 19.1 0.72 2.59 19.8 0.94 3.37 21.0 1.19 4.28 22.1 1.45 5.23 22.7 1.73 6.23 23.2 2.02 7.28 23.9 2.35 8.475.0 19.5 0.76 2.72 20.3 0.99 3.56 21.5 1.26 4.52 22.6 1.54 5.53 23.3 1.83 6.60 23.8 2.14 7.69 24.3 2.45 8.825.5 19.8 0.79 2.86 20.7 1.04 3.75 21.9 1.32 4.75 23.0 1.62 5.84 23.8 1.93 6.95 24.5 2.25 8.11 25.0 2.64 9.49


(7/32" x 1/8") 20° (1/4" x 1/8") 20° (9/32" x 1/8") 20° (5/16" x 1/8") 20° (11/32" x 1/8") 20° (3/8" x 1/8") 20° (13/32" x 1/8") 20°BARS @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

2.8 17.4 0.73 2.63 18.3 0.90 3.25 19.1 1.10 3.95 19.8 1.29 4.66 20.3 1.51 5.43 20.7 1.72 6.18 21.3 1.98 7.133.0 17.7 0.77 2.76 18.5 0.94 3.39 19.4 1.15 4.13 20.1 1.35 4.88 20.6 1.58 5.68 21.2 1.80 6.46 21.8 2.07 7.453.5 18.2 0.83 2.98 18.9 1.02 3.66 20.0 1.23 4.44 20.8 1.47 5.29 21.4 1.71 6.16 21.9 1.95 7.01 22.5 2.26 8.134.0 18.6 0.89 3.19 19.4 1.09 3.93 20.5 1.32 4.77 21.6 1.57 5.67 22.1 1.83 6.60 22.5 2.10 7.57 23.3 2.43 8.744.5 19.1 0.95 3.41 19.8 1.16 4.19 21.0 1.42 5.10 22.1 1.68 6.05 22.7 1.96 7.05 23.2 2.25 8.10 23.9 2.58 9.295.0 19.5 0.99 3.58 20.3 1.23 4.42 21.5 1.49 5.37 22.6 1.77 6.38 23.3 2.07 7.45 23.8 2.37 8.54 24.3 2.69 9.675.5 19.8 1.04 3.75 20.7 1.29 4.63 21.9 1.56 5.63 23.0 1.87 6.72 23.8 2.18 7.84 24.5 2.50 8.99 25.0 2.89 10.40

70CH / 70CHM

Full Circle Impact Sprinklers1 " (25 mm) Sprinklers




80EHD1 1/4" 32 mm Full Circle, Brass Impact Sprinkler

Bearing: 1 1/4" Male NPT, BrassTrajectory Angle: 27°Operating Range: 25-100 psi 1.7-6.9 barsFlow Rate: 17.1-127.7 GPM 2.88-2.9 m3/hRadius: 61-116 ft. 18.6-35.4 meters

Features• Heavy duty brass construction• Internal plastic straightening vane• Stainless steel springs and fulcrum pin• Plastic bearing hood• Chemically resistant washers• Dual nozzle ports• Two-year warranty

Benefits• Internal straightening vane increases

distance of throw• Plastic bearing hood protects spring

and bearing sleeve from damage• Corrosion and grit resistant• Built to last

80EHDPERFORMANCE DATA

U.S. STANDARD DATA




NOZZLE SIZE US STANDARD11/32" 3/8" 13/32" 7/16" 15/32" 1/2" 17/32" 9/16" 5/8" 11/16"

PSI @Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM

25 61 17.10 62 20.30 64 23.40 66 26.70 66 30.30 66 33.80 66 37.10 66 42.30 66 51.50 66 61.9030 64 18.80 65 22.30 68 25.70 69 29.30 72 33.20 73 37.10 73 40.80 73 46.40 73 56.50 73 68.1035 67 20.30 68 24.10 72 27.80 74 31.70 77 35.90 79 40.10 79 44.10 79 50.20 79 61.10 79 73.8040 69 21.80 71 25.80 75 29.70 77 33.90 80 38.50 83 42.90 83 47.20 86 53.70 86 65.40 86 79.2045 71 23.10 73 27.40 77 31.60 79 36.00 82 40.80 85 45.60 88 50.10 90 57.10 92 69.50 92 84.2050 73 24.40 75 28.90 79 33.30 81 38.00 84 43.10 87 48.10 90 52.90 94 60.20 95 73.30 97 88.9055 75 25.50 77 30.30 81 34.90 83 39.70 86 45.30 89 50.30 92 55.60 96 63.20 99 77.30 100 93.5060 77 25.80 79 30.80 83 35.90 86 41.60 88 47.40 91 53.00 94 58.80 97 65.50 101 80.10 104 97.8065 79 26.90 81 32.00 84 37.40 87 43.30 90 49.90 93 55.30 96 61.20 99 69.40 102 84.40 106 102.0070 81 28.10 83 33.30 86 38.90 89 45.10 91 51.40 94 57.50 98 63.50 101 72.20 104 87.80 108 106.0075 82 29.20 84 34.50 87 40.30 90 46.80 93 53.30 96 59.60 99 65.80 102 74.90 105 91.00 109 109.9080 83 30.40 86 35.70 89 41.80 92 48.40 94 55.10 97 61.60 101 68.10 104 77.50 107 94.10 110 113.7085 85 31.50 87 37.00 90 43.20 93 50.00 96 56.90 99 63.50 102 70.30 105 80.00 108 97.10 112 117.3090 86 32.70 89 38.30 92 44.60 95 51.50 97 58.50 100 65.30 104 72.40 106 82.20 110 99.90 113 120.9095 87 33.90 90 39.50 93 46.00 96 53.00 98 60.00 101 67.10 105 74.40 108 84.30 111 102.60 115 124.30100 88 34.00 91 40.70 94 47.40 97 54.50 99 61.50 102 68.90 106 76.40 109 87.20 112 105.20 116 127.70

* Nozzle and plugs must be purchased separately.

STRAIGHT BORE NOZZLE SBN5 AND SPREADER LAN120* (Stream Height: 14 ft.)



25 61 23.30 62 26.50 64 29.60 66 32.90 66 36.4030 64 25.60 65 29.10 68 32.40 69 36.10 72 40.0035 67 27.70 68 31.40 72 35.10 74 39.00 77 43.3040 69 29.60 71 33.60 75 37.60 77 41.80 80 46.3045 71 31.50 73 35.70 77 39.90 79 44.40 82 49.2050 73 33.20 75 37.70 79 42.10 81 46.80 84 51.9055 75 34.90 77 39.70 81 44.30 83 49.10 86 54.7060 77 36.50 79 41.40 83 46.60 86 51.50 88 57.2065 79 38.00 81 43.20 84 48.60 87 53.80 90 59.8070 81 40.10 83 44.90 86 50.40 89 55.90 91 62.1075 82 41.00 84 46.70 87 52.40 90 57.90 93 64.3080 83 42.60 86 48.30 89 54.30 92 60.00 94 66.7085 85 43.80 87 49.80 90 56.00 93 62.00 96 68.8090 86 45.70 89 51.40 92 57.90 95 63.90 97 70.7095 87 46.60 90 53.00 93 59.60 96 65.80 98 72.80100 88 47.90 91 54.50 94 61.20 97 67.50 99 74.80


U.S. Standard 7/32" 11/32" 3/8" 13/32" 7/16" 15/32" 1/2" 17/32" 9/16" 5/8" 11/16"

Brass Straight BoreNozzle SBN-5 103043-XX – 22 24 26 28 30 32 34 36 40 44Brass Low PressureNozzle SPB-1 108149-XX – 22 24 26 28 30 32 – – 40 –Brass 20° Low AngleSpreader Nozzle LPN-1-20 100226-XX 14 – – – – – – – – – –Plug for 1/8" Spreader Port 100417 Bold nozzle size numbers denote the most common nozzle choices.


Full Circle Impact Sprinklers1¼ " (32 mm) Sprinklers


Full Circle Impact Sprinklers1¼ " (32 mm) Sprinklers


80EHDPERFORMANCE DATA

METRIC DATA



STRAIGHT BORE NOZZLE SBN5V WITH PLUG* (Stream Height: 4.3m)

NOZZLE SIZE METRIC8.7 mm 9.5 mm 10.3 mm 11.1 mm 11.9 mm(11/32") (3/8") (13/32") (7/16") (15/32")


1.7 18.6 1.08 3.88 18.9 1.28 4.61 19.5 1.48 5.31 20.1 1.68 6.06 20.1 1.91 6.882.0 19.3 1.16 4.19 19.6 1.38 4.97 20.5 1.59 5.73 20.8 1.82 6.53 21.6 2.06 7.412.5 20.6 1.30 4.69 21.0 1.55 5.57 22.2 1.78 6.42 22.8 2.03 7.32 23.7 2.31 8.303.0 21.5 1.43 5.16 22.1 1.70 6.11 23.3 1.96 7.05 23.9 2.23 8.03 24.8 2.53 9.113.5 22.3 1.55 5.58 22.9 1.84 6.61 24.2 2.12 7.62 24.8 2.41 8.69 25.7 2.74 9.864.0 23.2 1.62 5.83 23.8 1.93 6.95 25.1 2.24 8.06 25.8 2.58 9.27 26.6 2.94 10.574.5 24.1 1.70 6.12 24.7 2.02 7.28 25.6 2.36 8.51 26.5 2.74 9.85 27.4 3.15 11.355.0 24.8 1.81 6.51 25.4 2.14 7.70 26.4 2.50 8.99 27.3 2.90 10.43 28.0 3.30 11.895.5 25.3 1.91 6.89 26.2 2.25 8.09 27.1 2.63 9.47 28.0 3.05 10.97 28.6 3.47 12.496.0 26.0 2.02 7.26 26.8 2.37 8.52 27.7 2.76 9.94 28.6 3.19 11.49 29.4 3.63 13.076.5 26.5 2.13 7.66 27.4 2.48 8.93 28.3 2.89 10.40 29.2 3.33 11.98 29.8 3.77 13.576.9 26.8 2.15 7.72 27.7 2.57 9.24 28.7 2.99 10.77 29.6 3.44 12.38 30.2 3.88 13.97


(1/2") (17/32") (9/16") (5/8") (11/16")BARS @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

1.7 20.1 2.13 7.68 20.1 2.34 8.43 20.1 2.67 9.61 20.1 3.25 11.70 20.1 3.91 14.062.0 21.8 2.30 8.27 21.8 2.53 9.10 21.8 2.87 10.35 21.8 3.50 12.60 21.8 4.22 15.182.5 24.4 2.57 9.26 24.4 2.83 10.19 24.6 3.22 11.60 24.6 3.92 14.12 24.6 4.74 17.063.0 25.7 2.83 10.17 26.4 3.11 11.18 27.1 3.54 12.73 27.5 4.31 15.50 27.5 5.22 18.783.5 26.6 3.05 11.00 27.5 3.36 12.10 28.7 3.83 13.77 29.1 4.66 16.78 29.7 5.65 20.344.0 27.5 3.27 11.79 28.4 3.63 13.06 29.4 4.07 14.66 30.5 4.98 17.93 31.2 6.06 21.824.5 28.4 3.49 12.58 29.3 3.87 13.92 30.2 4.39 15.79 31.1 5.33 19.20 32.3 6.45 23.215.0 29.0 3.69 13.29 30.0 4.08 14.68 30.9 4.64 16.70 31.8 5.64 20.30 33.1 6.81 24.515.5 29.5 3.88 13.96 30.7 4.29 15.44 31.7 4.88 17.57 32.6 5.93 21.33 33.5 7.16 25.776.0 30.3 4.05 14.58 31.3 4.49 16.15 32.1 5.10 18.37 33.2 6.20 22.30 34.3 7.49 26.966.5 30.7 4.22 15.17 32.0 4.67 16.83 32.8 5.30 19.07 33.8 6.45 23.21 35.0 7.81 28.116.9 31.1 4.35 15.65 32.3 4.82 17.35 33.2 5.50 19.81 34.1 6.64 23.89 35.4 8.06 29.00

STRAIGHT BORE NOZZLE SBN5 AND SPREADER LAN120* (Stream Height: 4.3m)


(11/32" x 7/32") 20° (3/8" x 7/32") 20° (13/32" x 7/32") 20° (7/16" x 7/32") 20° (15/32" x 7/32") 20°BARS @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

1.7 18.6 1.47 5.29 18.9 1.67 6.02 19.5 1.87 6.72 20.1 2.08 7.47 20.1 2.30 8.272.0 19.3 1.59 5.71 19.6 1.80 6.49 20.5 2.01 7.23 20.8 2.24 8.05 21.6 2.48 8.922.5 20.6 1.78 6.40 21.0 2.02 7.25 22.2 2.25 8.11 22.8 2.50 9.01 23.7 2.78 10.003.0 21.5 1.95 7.02 22.1 2.21 7.96 23.3 2.47 8.90 23.9 2.75 9.90 24.8 3.05 10.973.5 22.3 2.11 7.60 22.9 2.40 8.63 24.2 2.68 9.63 24.8 2.97 10.71 25.7 3.30 11.884.0 23.2 2.26 8.14 23.8 2.57 9.25 25.1 2.88 10.37 25.8 3.19 11.48 26.6 3.54 12.764.5 24.1 2.40 8.65 24.7 2.73 9.83 25.6 3.07 11.06 26.5 3.40 12.24 27.4 3.78 13.605.0 24.8 2.56 9.21 25.4 2.89 10.40 25.5 3.24 11.67 27.3 3.59 12.92 28.0 3.99 14.355.5 25.3 2.68 9.65 26.2 3.04 10.95 27.0 3.42 12.31 28.0 3.78 13.60 28.6 4.20 15.126.0 26.0 2.81 10.12 26.8 3.18 11.45 27.7 3.58 12.89 28.6 3.96 14.25 29.4 4.39 15.796.5 26.5 2.93 10.55 27.4 3.33 11.98 28.3 3.74 13.48 29.2 4.13 14.88 29.8 4.57 16.466.9 26.8 3.02 10.88 27.7 3.44 12.38 28.7 3.86 13.90 29.6 4.26 15.33 30.2 4.72 16.99


Metric 5.56mm 8.7 mm 9.5mm 10.3mm 11.1mm 11.9mm 12.7mm 13.5mm 14.3mm 15.9mm 17.5mm

Brass Straight BoreNozzle SBN-5 103043-XX – 22 24 26 28 30 32 34 36 40 44Brass Low PressureNozzle SPB-1 108149-XX – 22 24 26 28 30 32 – – 40 –Brass 20° Low AngleSpreader Nozzle LAN-1-20 100226-XX 14 – – – – – – – – – –Plug for 1/8" Spreader Port 100417 Bold nozzle size numbers denote the most common nozzle choices.

80EHD


Part / Full Circle Impact Sprinklers1/2 " (13 mm) Sprinklers


25BPJ-FP-ADJ25BPJ-FP-ADJ-DA-TNT1/2" 13mm Full or Part Circle, Brass Impact Sprinklers


Features• Durable brass die-cast, 'precision jet' (PJ) arm • Standard spoon style arm also available

(25B-FP-ADJ)• Stainless steel springs and fulcrum pin• Chemically resistant washers• All models include integral (to sprinkler body)

break-up pin for adjustable distribution (ADJ)• DA option also includes integral

(to sprinkler body) distance control flap• Full or Part Circle operation• Two-year warranty

Benefits• PJ arm reduces side splash• Many options provide design and

application flexibility• Corrosion and grit resistant• Built to last

25BPJ-FP-ADJ / 25BPJ-FP-ADJ-DA-TNTPERFORMANCE DATA



25BPJ-FP-ADJ w/SBN-1 9/64" 3.57mm A32901-09

25BPJ-FP-ADJ w/SBN-15/32" 3.97mm A32901-10

25BPJ-FP-ADJ-DA-TNT w/SBN-19/64" 3.57mm A34403-09

25BPJ-FP-ADJ-DA-TNT w/SBN-15/32" 3.57mm A34403-10


U.S. Standard 9/64" 5/32"

Metric 3.57 mm 3.97 mm

Brass Straight Bore Nozzle SBN-1 105780-XX 09 10



NOZZLE SIZE US STANDARD9/64" 5/32"

PSI @Nozzle Rad. GPM Rad. GPM

30 38 3.10 39 3.8035 38 3.40 39 4.1040 39 3.60 40 4.4045 39 3.80 40 4.7050 40 4.00 41 5.00


NOZZLE SIZE METRIC3.57 mm 3.97 mm

(9/64") (5/32")Bars@ Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h)

2.1 11.6 0.20 0.70 11.9 0.24 0.862.5 11.8 0.22 0.77 12.0 0.26 0.953.0 12.0 0.24 0.85 12.2 0.29 1.053.5 12.2 0.25 0.91 12.5 0.32 1.14




LOW ANGLE NOZZLE LAN1 (Stream Height: 3 ft.)


PSI @ Red Black Blue Yellow BeigeNozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM

25 - - 32 2.20 35 2.80 38 4.20 39 5.5035 37 2.00 37 2.70 38 3.30 41 4.80 42 6.3045 38 2.30 39 3.00 40 3.70 42 5.40 44 7.1055 38 2.50 41 3.30 41 4.10 43 6.00 45 7.9060 38 2.60 41 3.50 42 4.20 44 6.40 45 8.40


7/64" 5/32"PSI @ Black YellowNozzle Rad. GPM Rad. GPM

25 22 1.5 25 3.435 23 1.9 29 4.045 25 2.1 31 4.55 25 2.3 32 5.060 25 2.4 32 5.4

*Available Assembled with a 1/8” (08) Straight Bore Nozzle. Other Nozzles are available at no charge.

STRAIGHT BORE NOZZLE SBN1(Stream Height: 1.8m)

LOW ANGLE NOZZLE LAN110 (Stream Height: 0.9m)

NOZZLE SIZE METRIC2.38 mm 2.78 mm 3.18 mm 3.97 mm 4.76 mm(3/32") Red (7/64") Black (1/8") Blue (5/32") Yellow (3/16") Beige

Bars @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

1.7 - - - 9.8 0.14 0.5 10.7 0.18 0.64 11.6 0.26 0.95 11.9 0.35 1.252.0 - - - 10.4 0.15 0.55 11.0 0.19 0.68 11.9 0.28 1.01 12.3 0.37 1.322.5 11.3 0.13 0.46 11.4 0.17 0.62 11.7 0.21 0.76 12.5 0.31 1.11 12.9 0.40 1.453.0 11.5 0.14 0.51 11.8 0.19 0.67 12.1 0.23 0.83 12.8 0.34 1.21 13.3 0.44 1.593.5 11.6 0.15 0.55 12.2 0.20 0.72 12.4 0.25 0.89 13.0 0.36 1.30 13.6 0.48 1.724.0 11.6 0.16 0.58 12.5 0.22 0.78 12.7 0.26 0.94 13.3 0.39 1.42 13.7 0.52 1.864.1 11.6 0.16 0.59 12.5 0.22 0.79 12.8 0.26 0.95 13.4 0.40 1.45 13.7 0.53 1.91

NOZZLE SIZE METRIC

2.78 mm 3.97 mm(7/64") Black (5/32") Yellow

Bars @ Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h)

1.7 6.7 0.09 0.34 706 0.21 0.772.0 6.8 0.10 0.38 8.1 0.23 0.832.5 7.1 0.12 0.44 8.9 0.26 0.923.0 7.5 0.13 0.47 9.4 0.28 1.013.5 7.6 0.14 0.50 9.6 0.30 1.094.0 7.6 0.15 0.54 9.8 0.33 1.194.1 7.6 0.15 0.54 9.8 0.34 1.23

Nozzle Only XX = Nozzle SizeU.S. Standard 3/32" 7/64" 1/8" 5/32" 3/16"

Metric 2.38 mm 2.78 mm 3.18 mm 3.97 mm 4.76 mm

Plastic Quick-Fit Straight Bore Nozzle PQFN 206592-XX 06 07 08 10 12

Low Angle Quick-Fit Nozzle PQLAN 115902-XX – 07 – 10 –



PERFORMANCE DATA 2045-PJ

2045-PJ1/2" 13mm Full or Part Circle, Plastic Impact Sprinkler

Bearing: 1/2" Male NPT, PlasticTrajectory Angle: 23°Operating Range: 25-60 psi 1.7-4.1 barsFlow Rate: 1.5-8.4 GPM 0.34-1.91 m3/hRadius: 22-45 ft. 6.7-13.7 metersOne QuickFit Nozzle Port

Features• Durable Delrin™ plastic, body arm,

bearing sleeve, nipple and break up pin• Stainless steel springs and fulcrum pin• Chemically resistant washers• Plastic Quick Fit Nozzles• Low Angle (10°) Nozzles available• Integral straightening vane for greater

distance• Full or Part Circle operation• Two-year warranty

Benefits• Superior chemical and grit resistance• Smooth rotation at lower pressures• Design flexibility• Built to last




PQFN 1/8" B4610008




U.S. Standard 5/32" 11/64" 3/16"


Brass Straight Bore Adjustable Nozzle ADJN-3 100328-XX 10 11 12

Brass Adjustable Do-All Nozzle DAN-3 100332-XX 10 – 12

Brass Keyhole Nozzle KHN-3 106353-XX 10 11 12


BRASS STRAIGHT BORE NOZZLE ADJN3 OR DAN3 (Stream Height: 9 ft.)



30 42 3.90 43 4.60 44 5.5035 43 4.20 44 5.00 46 6.0040 44 4.50 45 5.40 47 6.4045 44 4.70 46 5.70 48 6.8050 45 5.00 47 6.00 49 7.2055 45 5.20 48 6.30 50 7.5060 46 5.40 48 6.60 51 7.80

BRASS STRAIGHT BORE NOZZLE ADJN3 OR DAN3 (Stream Height: 2.7m)


(5/32") (11/64") (3/16")BARS @ Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

2.1 12.8 0.25 0.89 13.1 0.29 1.04 13.4 0.35 1.252.5 13.2 0.27 0.97 13.5 0.32 1.16 14.1 0.38 1.393.0 13.4 0.29 1.05 13.9 0.35 1.27 14.5 0.42 1.523.5 13.7 0.32 1.14 14.4 0.38 1.37 15.0 0.46 1.654.0 13.9 0.34 1.21 14.6 0.41 1.47 15.4 0.48 1.744.1 14.0 0.34 1.23 14.6 0.42 1.50 15.5 0.49 1.77

Sprinkler Only35A-TNT

Sprinkler without Nozzle A39200 35A-ADJ-TNTSprinkler with ADJN-3 A38820-12

Sprinkler with brass keyhole

nozzle KHN-3 A38810-12 35A-PJ-ADJ-TNTSprinkler with ADJN-3 A40613-12

35A-PJ-DA-TNTSprinkler with DAN-3 A40614-12


PERFORMANCE DATA 35A-TNT | 35A-ADJ-TNT35A-PJ-ADJ-TNT | 35A-PJ-DA-TNT

35A-TNT 35A-ADJ-TNT35A-PJ-ADJ-TNT35A-PJ-DA-TNT3/4" 19 mm Full or Part Circle, Brass Impact Sprinklers


Features• "Precision jet" (PJ) arm (35A-PJ)• Standard spoon style arm

also available (35A-TNT)• Stainless steel springs and fulcrum pin• Chemically resistant washers• ADJ-3 Nozzles have break-up pins • DAN-3 Nozzles have break-up pins

Benefits• PJ arm reduces side splash• Many options provide design

and application flexibility• Corrosion and grit resistant• Available less Nozzle with

standard spoon only• Standard spoon model also available

with 3/16” (#12) Nozzle• PJ model available with 3/16” (#12)

ADJ pr 3/16” (#12) DA Nozzles only• Full or Part Circle operation• Two-year warranty. Built to last





PERFORMANCE DATA


Sprinkler Only

Sprinkler without Nozzle AG2001

ADJUSTABLE STRAIGHT BORE NOZZLE ADJN4 (Stream Height: 10 ft.)


PSI @Nozzle Rad. GPM

50 57 12.9055 57 13.6060 58 14.2065 62 14.8070 63 15.4075 64 16.0080 65 16.50

Available without Nozzle or assembled with a1/4” (16) Straight Bore Nozzle.

ADJUSTABLE STRAIGHT BORE NOZZLE ADJN4 (Stream Height: 3m)

NOZZLE SIZE METRIC6.35 mm

BARS @ (1/4")Nozzle Rad. Flow Flow

(m) (lps) (m3/h)

3.5 17.4 0.82 2.93

4.0 17.9 0.88 3.16

4.5 18.5 0.93 3.37

5.0 19.2 0.99 3.55

5.5 19.8 1.04 3.75


U.S. Standard 1/4"

Metric 6.35 mm

Brass Straight Bore Adjustable Nozzle ADJN-4 100385-XX 16


65PJ

65PJ1" 25 mm Full or Part Circle, Brass Impact Sprinkler

Bearing: 1" Female NPT, BrassTrajectory Angle: 27°Operating Range: 50-80 psi 3.5-5.5 barsFlow Rate: 12.9-16.5 GPM 2.93-3.75 m3/hRadius: 57-65 ft. 17.4-19.8 metersOne 3/8” Female NPT Nozzle Port

Features• Heavy duty brass construction• 1" Female NPT Bearing• "Precision jet" (PJ) arm • Stainless steel springs and fulcrum pin• Chemically resistant washers• ADJN-4 Nozzles include

integral to Nozzle break-up pin • Full or Part Circle operation• Two-year warranty

Benefits• PJ arm reduces side splash• Many options provide design

and application flexibility• Corrosion and grit resistant• Built to last



ADJN-4 1/4" A4200316

Part / Full Circle Impact Sprinklers1 " (25 mm) Sprinklers





25 61 17.10 62 20.30 64 23.40 66 26.70 66 30.30 66 33.80 66 37.10 66 42.30 66 51.50 66 61.9030 64 18.80 65 22.30 68 25.70 69 29.30 72 33.20 73 37.10 73 40.80 73 46.40 73 56.50 73 68.1035 67 20.30 68 24.10 72 27.80 74 31.70 77 35.90 79 40.10 79 44.10 79 50.20 79 61.10 79 73.8040 69 21.80 71 25.80 75 29.70 77 33.90 80 38.50 83 42.90 83 47.20 86 53.70 86 65.40 86 79.2045 71 23.10 73 27.40 77 31.60 79 36.00 82 40.80 85 45.60 88 50.10 90 57.10 92 69.50 92 84.2050 73 24.40 75 28.90 79 33.30 81 38.00 84 43.10 87 48.10 90 52.90 94 60.20 95 73.30 97 88.9055 75 25.50 77 30.30 81 34.90 83 39.70 86 45.30 89 50.30 92 55.60 96 63.20 99 77.30 100 93.5060 77 25.80 79 30.80 83 35.90 86 41.60 88 47.40 91 53.00 94 58.80 97 65.50 101 80.10 104 97.8065 79 26.90 81 32.00 84 37.40 87 43.30 90 49.90 93 55.30 96 61.20 99 69.40 102 84.40 106 102.0070 81 28.10 83 33.30 86 38.90 89 45.10 91 51.40 94 57.50 98 63.50 101 72.20 104 87.80 108 106.0075 82 29.20 84 34.50 87 40.30 90 46.80 93 53.30 96 59.60 99 65.80 102 74.90 105 91.00 109 109.9080 83 30.40 86 35.70 89 41.80 92 48.40 94 55.10 97 61.60 101 68.10 104 77.50 107 94.10 110 113.7085 85 31.50 87 37.00 90 43.20 93 50.00 96 56.90 99 63.50 102 70.30 105 80.00 108 97.10 112 117.3090 86 32.70 89 38.30 92 44.60 95 51.50 97 58.50 100 65.30 104 72.40 106 82.20 110 99.90 113 120.9095 87 33.90 90 39.50 93 46.00 96 53.00 98 60.00 101 67.10 105 74.40 108 84.30 111 102.60 115 124.30100 88 34.00 91 40.70 94 47.40 97 54.50 99 61.50 102 68.90 106 76.40 109 87.20 112 105.20 116 127.70

STRAIGHT BORE NOZZLE SBN5 AND SPREADER LAN120* (Stream Height: 14 ft.)



25 61 23.30 62 26.50 64 29.60 66 32.90 66 36.4030 64 25.60 65 29.10 68 32.40 69 36.10 72 40.0035 67 27.70 68 31.40 72 35.10 74 39.00 77 43.3040 69 29.60 71 33.60 75 37.60 77 41.80 80 46.3045 71 31.50 73 35.70 77 39.90 79 44.40 82 49.2050 73 33.20 75 37.70 79 42.10 81 46.80 84 51.9055 75 34.90 77 39.70 81 44.30 83 49.10 86 54.7060 77 36.50 79 41.40 83 46.60 86 51.50 88 57.2065 79 38.00 81 43.20 84 48.60 87 53.80 90 59.8070 81 40.10 83 44.90 86 50.40 89 55.90 91 62.1075 82 41.00 84 46.70 87 52.40 90 57.90 93 64.3080 83 42.60 86 48.30 89 54.30 92 60.00 94 66.7085 85 43.80 87 49.80 90 56.00 93 62.00 96 68.8090 86 45.70 89 51.40 92 57.90 95 63.90 97 70.7095 87 46.60 90 53.00 93 59.60 96 65.80 98 72.80100 88 47.90 91 54.50 94 61.20 97 67.50 99 74.80


Sprinkler without Nozzle without Plug A23600


U.S. Standard 7/32" 11/32" 3/8" 13/32" 7/16" 15/32" 1/2" 17/32" 9/16" 5/8" 11/16"

Brass Straight BoreNozzle SBN-5 103043-XX – 22 24 26 28 30 32 34 36 40 44Brass Low PressureNozzle LPN-5 108149-XX – – 24 – 28 30 32 – – 40 –Brass 20° Low AngleSpreader Nozzle LAN-1-20 100226-XX 14 – – – – – – – – – –1/8" Male NPT Plug for Spreader port 100255 Bold nozzle size numbers denote the most common nozzle choices.

U.S. STANDARD DATA

PERFORMANCE DATA 85EHD

85EHD1 1/4" 32 mm Full or Part Circle, Brass Impact Sprinklers

Bearing: 1 1/4" Male NPT, BrassTrajectory Angle: 23°Operating Range: 25-100 psi 1.7-6.9 barsFlow Rate: 17.1-127.7 GPM 3.88-28.99 m3/hRadius: 61-116 ft. 18.6-35.4 metersOne 3/4” Female NPT Nozzle PortOne 1/8” Female NPT Spreader Nozzle Port

Features• Heavy duty brass construction• Stainless steel wear buttons,

springs and fulcrum pin• Locking stainless steel trip collars• Chemically resistant washers • Full or Part Circle operation• Two-year warranty

Benefits• Internal straightening vane

increases distance of throw• Stainless steel buttons protect

trip mechanism from wear• Corrosion and grit resistant• Built to last



Part / Full Circle Impact Sprinklers1¼ " (32 mm) Sprinklers


See Chart below.


Sprinkler without Nozzlewithout Plug A23802

STRAIGHT BORE NOZZLE SBN5 WITH PLUG (Stream Height: 4.3m)

NOZZLE SIZE METRIC8.7 mm 9.5 mm 10.3 mm 11.1 mm 11.9 mm(11/32") (3/8") (13/32") (7/16") (15/32")


1.7 18.6 1.08 3.88 18.9 1.28 4.61 19.5 1.48 5.31 20.1 1.68 6.06 20.1 1.91 6.882.0 19.3 1.16 4.19 19.6 1.38 4.97 20.5 1.59 5.73 20.8 1.82 6.53 21.6 2.06 7.412.5 20.6 1.30 4.69 21.0 1.55 5.57 22.2 1.78 6.42 22.8 2.03 7.32 23.7 2.31 8.303.0 21.5 1.43 5.16 22.1 1.70 6.11 23.3 1.96 7.05 23.9 2.23 8.03 24.8 2.53 9.113.5 22.3 1.55 5.58 22.9 1.84 6.61 24.2 2.12 7.62 24.8 2.41 8.69 25.7 2.74 9.864.0 23.2 1.62 5.83 23.8 1.93 6.95 25.1 2.24 8.06 25.8 2.58 9.27 26.6 2.94 10.574.5 24.1 1.70 6.12 24.7 2.02 7.28 25.6 2.36 8.51 26.5 2.74 9.85 27.4 3.15 11.355.0 24.8 1.81 6.51 25.4 2.14 7.70 26.4 2.50 8.99 27.3 2.90 10.43 28.0 3.30 11.895.5 25.3 1.91 6.89 26.2 2.25 8.09 27.1 2.63 9.47 28.0 3.05 10.97 28.6 3.47 12.496.0 26.0 2.02 7.26 26.8 2.37 8.52 27.7 2.76 9.94 28.6 3.19 11.49 29.4 3.63 13.076.5 26.5 2.13 7.66 27.4 2.48 8.93 28.3 2.89 10.40 29.2 3.33 11.98 29.8 3.77 13.576.9 26.8 2.15 7.72 27.7 2.57 9.24 28.7 2.99 10.77 29.6 3.44 12.38 30.2 3.88 13.97



1.7 20.1 2.13 7.68 20.1 2.34 8.43 20.1 2.67 9.61 20.1 3.25 11.70 20.1 3.91 14.062.0 21.8 2.30 8.27 21.8 2.53 9.10 21.8 2.87 10.35 21.8 3.50 12.60 21.8 4.22 15.182.5 24.4 2.57 9.26 24.4 2.83 10.19 24.6 3.22 11.60 24.6 3.92 14.12 24.6 4.74 17.063.0 25.7 2.83 10.17 26.4 3.11 11.18 27.1 3.54 12.73 27.5 4.31 15.50 27.5 5.22 18.783.5 26.6 3.05 11.00 27.5 3.36 12.10 28.7 3.83 13.77 29.1 4.66 16.78 29.7 5.65 20.344.0 27.5 3.27 11.79 28.4 3.63 13.06 29.4 4.07 14.66 30.5 4.98 17.93 31.2 6.06 21.824.5 28.4 3.49 12.58 29.3 3.87 13.92 30.2 4.39 15.79 31.1 5.33 19.20 32.3 6.45 23.215.0 29.0 3.69 13.29 30.0 4.08 14.68 30.9 4.64 16.70 31.8 5.64 20.30 33.1 6.81 24.515.5 29.5 3.88 13.96 30.7 4.29 15.44 31.7 4.88 17.57 32.6 5.93 21.33 33.5 7.16 25.776.0 30.3 4.05 14.58 31.3 4.49 16.15 32.1 5.10 18.37 33.2 6.20 22.30 34.3 7.49 26.966.5 30.7 4.22 15.17 32.0 4.67 16.83 32.8 5.30 19.07 33.8 6.45 23.21 35.0 7.81 28.116.9 31.1 4.35 15.65 32.3 4.82 17.35 33.2 5.50 19.81 34.1 6.64 23.89 35.4 8.06 29.00

STRAIGHT BORE NOZZLE SBN5 AND SPREADER LAN120 (Stream Height: 4.3m)


(11/32" x 7/32") 20° (3/8" x 7/32") 20° (13/32" x 7/32") 20° (7/16" x 7/32") 20° (15/32" x 7/32") 20°BARS @ Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow Flow Rad. Flow FlowNozzle (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h) (m) (lps) (m3/h)

1.7 18.6 1.47 5.29 18.9 1.67 6.02 19.5 1.87 6.72 20.1 2.08 7.47 20.1 2.30 8.272.0 19.3 1.59 5.71 19.6 1.80 6.49 20.5 2.01 7.23 20.8 2.24 8.05 21.6 2.48 8.922.5 20.6 1.78 6.40 21.0 2.02 7.25 22.2 2.25 8.11 22.8 2.50 9.01 23.7 2.78 10.003.0 21.5 1.95 7.02 22.1 2.21 7.96 23.3 2.47 8.90 23.9 2.75 9.90 24.8 3.05 10.973.5 22.3 2.11 7.60 22.9 2.40 8.63 24.2 2.68 9.63 24.8 2.97 10.71 25.7 3.30 11.884.0 23.2 2.26 8.14 23.8 2.57 9.25 25.1 2.88 10.37 25.8 3.19 11.48 26.6 3.54 12.764.5 24.1 2.40 8.65 24.7 2.73 9.83 25.6 3.07 11.06 26.5 3.40 12.24 27.4 3.78 13.605.0 24.8 2.56 9.21 25.4 2.89 10.40 25.5 3.24 11.67 27.3 3.59 12.92 28.0 3.99 14.355.5 25.3 2.68 9.65 26.2 3.04 10.95 27.0 3.42 12.31 28.0 3.78 13.60 28.6 4.20 15.126.0 26.0 2.81 10.12 26.8 3.18 11.45 27.7 3.58 12.89 28.6 3.96 14.25 29.4 4.39 15.796.5 26.5 2.93 10.55 27.4 3.33 11.98 28.3 3.74 13.48 29.2 4.13 14.88 29.8 4.57 16.466.9 26.8 3.02 10.88 27.7 3.44 12.38 28.7 3.86 13.90 29.6 4.26 15.33 30.2 4.72 16.99


Metric 5.56mm 8.7 mm 9.5mm 10.3mm 11.1mm 11.9mm 12.7mm 13.5mm 14.3mm 15.9mm 17.5mm

Brass Straight BoreNozzle SBN-5 103043-XX – 22 24 26 28 30 32 34 36 40 44Brass Low PressureNozzle LPN-5 108149-XX – – 24 – 28 30 32 – – 40 –Brass 20° Low AngleSpreader Nozzle LAN-1-20 100226-XX 14 – – – – – – – – – –1/8" Male NPT Plug for Spreader port 100417 Bold nozzle size numbers denote the most common nozzle choices.

85EHD



METRIC DATA

PERFORMANCE DATA 85EHD





85EHD-LA1 1/4" 32 mm Full or Part Circle, Brass Impact Sprinklers

Bearing: 1 1/4" Male NPT, BrassTrajectory Angle: 17°Operating Range: 20-100 psi 1.4-6.9 barsFlow Rate: 17.1-127.7 GPM 3.88-29.0 m3/hRadius: 48-108 ft. 14.64-32.9 metersOne 3/4” Female NPT Nozzle Port, only

Features• Heavy duty brass construction• Stainless steel wear buttons,

springs and fulcrum pin• Locking stainless steel trip collars• Chemically resistant washers • Full or Part Circle operation• Two-year warranty

Benefits• Internal straightening vane

increases distance of throw• Stainless steel buttons protect

trip mechanism from wear• Corrosion and grit resistant• Built to last

85EHD-LAPERFORMANCE DATA

U.S. STANDARD DATA







25 52 17.10 55 20.30 57 23.40 60 26.70 60 30.30 60 33.80 60 37.10 60 42.30 60 51.50 60 61.9030 57 18.80 59 22.30 62 25.70 63 29.30 65 33.20 67 37.10 67 40.80 67 46.40 67 56.50 67 68.1035 60 20.30 62 24.10 65 27.80 67 31.70 70 35.90 71 40.10 73 44.10 73 50.20 73 61.10 73 73.8040 62 21.80 65 25.80 67 29.70 70 33.90 72 38.50 75 42.90 76 47.20 79 53.70 79 65.40 79 79.2045 65 23.10 67 27.40 70 31.60 72 36.00 75 40.80 77 45.60 80 50.10 80 57.10 84 69.50 84 84.2050 67 24.40 69 28.90 72 33.30 74 38.00 77 43.10 79 48.10 82 52.90 84 60.20 87 73.30 88 88.9055 69 25.50 71 30.30 74 34.90 76 39.70 79 45.30 82 50.30 84 55.60 86 63.20 91 77.30 92 93.5060 71 25.80 73 30.80 76 35.90 78 41.60 81 47.40 83 53.00 86 58.80 88 66.50 93 80.70 96 97.8065 72 26.90 75 32.00 77 37.40 80 43.30 83 49.90 85 55.30 88 61.20 90 69.40 94 84.40 98 102.0070 74 28.10 77 33.30 79 38.90 82 45.10 84 51.40 87 57.50 89 63.50 92 72.20 96 87.80 100 106.0075 76 29.20 78 34.50 81 40.30 83 46.80 86 53.30 89 59.60 91 65.80 93 74.90 98 91.00 102 109.9080 77 30.40 80 35.70 82 41.80 85 48.40 88 55.10 90 61.60 93 68.10 95 77.50 99 94.10 103 113.7085 79 31.50 81 37.00 84 43.20 86 50.00 89 56.90 92 63.50 94 70.30 97 80.00 101 97.10 105 117.3090 80 32.70 83 38.30 85 44.60 88 51.50 91 58.50 93 65.30 96 72.40 98 82.20 102 99.90 106 120.9095 82 33.90 84 39.50 87 46.00 89 53.00 92 60.00 95 67.10 97 74.40 99 84.30 103 102.60 107 124.30100 83 34.00 85 40.10 88 47.40 91 54.50 93 61.50 96 68.90 98 76.40 101 87.20 105 105.20 108 127.70

LOW PRESSURE NOZZLE LPN5* (Stream Height: 10ft.)



20 48 17.80 51 24.00 54 30.80 56 46.0025 52 20.30 55 26.70 58 33.80 61 51.5030 55 22.30 60 29.30 63 37.10 67 56.5035 59 24.10 64 31.70 68 40.10 72 61.1040 63 25.80 68 33.90 72 42.90 77 65.4045 66 27.40 72 36.00 75 45.60 82 69.5050 68 28.90 73 38.00 77 48.10 85 73.3055 70 30.30 75 39.70 80 50.30 89 77.30

Nozzle Only XX = Nozzle SizeU.S. Standard 11/32" 3/8" 13/32" 7/16" 15/32" 1/2" 17/32" 9/16" 5/8" 11/16"

Brass Straight BoreNozzle SBN-5 103043-XX 22 24 26 28 30 32 34 36 40 44Brass Low PressureNozzle LPN-5 108149-XX – 24 – 28 30 32 – – 40 –


See Chart below.




85EHD-LAPERFORMANCE DATA

METRIC DATA


LOW PRESSURE NOZZLE LPN5* (Stream Height: 3m)



1.4 14.6 1.12 4.04 15.5 1.51 5.45 16.5 1.94 7.00 17.1 2.90 10.451.5 15.1 1.18 4.24 16.0 1.57 5.66 16.9 2.01 7.23 17.6 3.02 10.882.0 16.6 1.38 4.97 18.0 1.82 6.53 18.9 2.30 8.27 20.1 3.50 12.602.5 18.3 1.55 5.57 19.8 2.03 7.32 21.0 2.57 9.26 22.3 3.92 14.123.0 19.8 1.70 6.11 21.6 2.23 8.03 22.6 2.83 10.17 24.5 4.31 15.503.5 20.8 1.84 6.61 22.3 2.41 8.69 23.6 3.05 11.00 26.1 4.66 16.783.8 21.3 1.91 6.88 22.9 2.50 9.02 24.4 3.17 11.42 27.1 4.88 17.56

STRAIGHT BORE NOZZLE SBN5* (Stream Height: 3m)



1.7 15.8 1.08 3.88 16.8 1.28 4.61 17.4 1.48 5.31 18.3 1.68 6.06 18.3 1.91 6.882.0 17.1 1.16 4.19 17.7 1.38 4.97 18.6 1.59 5.73 19.0 1.82 6.53 19.5 2.06 7.412.5 18.4 1.30 4.69 19.1 1.55 5.57 20.0 1.78 6.42 20.6 2.03 7.32 21.5 2.31 8.303.0 19.5 1.43 5.16 20.2 1.70 6.11 21.1 1.96 7.05 21.8 2.23 8.03 22.6 2.53 9.113.5 20.5 1.55 5.58 21.1 1.84 6.61 22.0 2.12 7.62 22.6 2.41 8.69 23.6 2.74 9.864.0 21.4 1.62 5.83 22.0 1.93 6.95 22.9 2.24 8.06 23.5 2.58 9.27 24.4 2.94 10.574.5 22.0 1.70 6.12 22.9 2.02 7.28 23.5 2.36 8.51 24.4 2.74 9.85 25.3 3.15 11.355.0 22.9 1.81 6.51 23.6 2.14 7.70 24.4 2.50 8.99 25.1 2.90 10.43 25.9 3.30 11.895.5 23.5 1.91 6.89 24.3 2.25 8.09 25.0 2.63 9.47 25.9 3.05 10.97 26.8 3.47 12.496.0 24.2 2.02 7.26 24.9 2.37 8.52 25.7 2.76 9.94 26.5 3.19 11.49 27.4 3.63 13.076.5 24.9 2.13 7.66 25.6 2.48 8.93 26.4 2.89 10.40 27.1 3.33 11.98 28.0 3.77 13.576.9 25.3 2.15 7.72 25.9 2.57 9.24 26.8 2.99 10.77 27.7 3.44 12.38 28.3 3.88 13.97



1.7 18.3 2.13 7.68 18.3 2.34 8.43 18.3 2.67 9.61 18.3 3.25 11.70 18.3 3.91 14.062.0 20.0 2.30 8.27 20.0 2.53 9.10 20.0 2.87 10.35 20.0 3.50 12.60 20.0 4.22 15.182.5 21.9 2.57 9.26 22.5 2.83 10.19 22.7 3.22 11.60 22.7 3.92 14.12 22.7 4.74 17.063.0 23.3 2.83 10.17 24.0 3.11 11.18 24.3 3.54 12.73 25.1 4.31 15.50 25.1 5.22 18.783.5 24.2 3.05 11.00 25.1 3.36 12.10 25.7 3.83 13.77 26.7 4.66 16.78 27.0 5.65 20.344.0 25.2 3.27 11.79 26.0 3.63 13.06 26.6 4.07 14.66 28.1 4.98 17.93 28.8 6.06 21.824.5 25.9 3.49 12.58 26.8 3.87 13.92 27.5 4.39 15.79 28.7 5.33 19.20 29.9 6.45 23.215.0 26.8 3.69 13.29 27.4 4.08 14.68 28.2 4.64 16.70 29.6 5.64 20.30 30.8 6.81 24.515.5 27.4 3.88 13.96 28.3 4.29 15.44 28.9 4.88 17.57 30.2 5.93 21.33 31.4 7.16 25.776.0 28.2 4.05 14.58 28.9 4.49 16.15 29.7 5.10 18.37 30.9 6.20 22.30 32.1 7.49 26.966.5 28.9 4.22 15.17 29.5 4.67 16.83 30.1 5.30 19.07 31.3 6.45 23.21 32.6 7.81 28.116.9 29.3 4.35 15.65 29.9 4.82 17.35 30.8 5.50 19.81 32.0 6.64 23.89 32.9 8.06 29.00



Nozzle Only XX = Nozzle SizeMetric 8.7 mm 9.5 mm 10.3 mm 11.1 mm 11.9 mm 12.7 mm 13.5 mm 14.3 mm 15.9 mm 17.5 mm

Brass StraightBore Nozzle SBN-5 103043-XX 22 24 26 28 30 32 34 36 40 44Brass Low Pres-sure Nozzle LPN-5 108149-XX – 24 – 28 30 32 – – 40 –

85EHD-LA


Performance Data

1/2" Impact SprinklersSprinkler ThrowU.S. Units

GENERAL NOTEPerformance data are obtained underideal test conditions and may be adversely affected by wind, hydraulic conditions, and other factors.

NOTE ADiameters are based on a 30"/76cmriser height.

NOTE BSome data shown will vary from catalogdata. This occurs because two sprinklerswith the same nozzle size can have a different diameter of throw.

1/2" IMPACT SPRINKLERSPERFORMANCE DATA

U.S. STANDARD DATA

Performance DataThrow / F low Data


RADIUS FOR 23° TRAJECTORY STRAIGHT BORE NOZZLES

1/16" 51 DRILL 5/64" 3/32" 7/64" 1/8" 9/64" 5/32"

20 - 29 30 33 34 36 38 3930 30 30 31 34 35 38 39 4040 30 31 32 35 36 39 40 4150 31 32 33 36 37 39 41 4260 32 33 34 37 38 40 41 42

RADIUS FOR 15° TRAJECTORY20 - - - - - - - -30 26 - 28 30 32 33 34 -40 28 - 30 32 34 35 37 -50 29 - 32 33 35 37 38 -

RADIUS FOR 13° TRAJECTORY20 - - - - - - - -30 25 - 27 29 30 32 33 -40 26 - 29 31 32 34 35 -50 28 - 31 32 34 36 37 -

RADIUS FOR 10° TRAJECTORY20 - - - - - - - -30 24 24 26 27 28 - - -40 25 25 27 29 30 - - -50 27 27 29 31 31 - - -

RADIUS FOR 7° TRAJECTORY20 - -- - - - - - -30 - -- 24 25 26 28 - -40 - - 26 27 28 30 - -50 - - 27 29 29 32 - -

PRESSURE(PSI)@ NOZZLE

FLOW GALLONS PER MINUTE FOR SB

1/16" 51 DRILL 50 DRILL 5/64" 44 DRILL 3/32" 7/64" 1/8" 9/64" 5/32"

20 - 0.59 0.62 0.79 0.97 1.14 1.55 2.03 2.57 3.1730 0.62 0.71 0.78 0.97 1.17 1.39 1.90 2.48 3.15 3.8940 0.72 0.83 0.90 1.12 1.36 1.61 2.19 2.86 3.64 4.4950 0.80 0.92 1.00 1.25 1.51 1.80 2.45 3.20 4.07 5.0260 0.88 1.01 1.10 1.37 1.62 1.97 2.68 3.50 4.45 5.50


Sprinkler FlowU.S. Units

13mm IMPACT SPRINKLERSPERFORMANCE DATA

METRIC DATA

13mm Impact SprinklersSprinkler ThrowMetric Units

GENERAL NOTEPerformance data are obtained under ideal test conditions and may be adversely affected by wind, hydraulic conditions, and other factors.


NOTE BThis data is not appropriate for the20AH(ALUM). See catalog performance chart.

NOTE CSome data shown will vary from catalog data.This occurs because two sprinklers with the same nozzle size can have a different diameter of throw.

RADIUS FOR 23° TRAJECTORY STRAIGHT BORE NOZZLES1.59 mm 51 Drill 1.98 mm 2.38 mm 2.78 mm 3.18 mm 3.57 mm 3.97 mm

1.5 - 8.9 9.4 10.1 10.5 11.2 11.7 12.02.0 9.0 9.1 9.6 10.3 10.8 11.6 12.0 12.32.5 9.2 9.3 9.8 10.6 11.1 11.8 12.2 12.53.0 9.4 9.6 10.0 10.8 11.4 12.0 12.4 12.73.5 9.6 9.8 10.2 11.0 11.6 12.1 12.5 12.84.0 9.9 10.0 10.5 11.2 11.7 12.2 12.6 12.9

RADIUS FOR 15° TRAJECTORY2.0 8.0 - 8.7 9.2 9.7 10.1 10.42.5 8.4 - 9.1 9.7 10.2 10.6 11.03.0 8.7 - 9.5 10.1 10.6 11.0 11.43.5 9.0 - 9.7 10.4 10.9 11.4 11.7 -

RADIUS FOR 13° TRAJECTORY2.0 7.6 - 8.3 8.9 9.4 9.8 10.1 -2.5 8.0 - 8.7 9.3 9.8 10.2 10.6 -3.0 8.3 - 9.0 9.7 10.2 10.6 11.0 -3.5 8.9 - 9.4 10.0 10.5 11.0 11.4 -

RADIUS FOR 10° TRAJECTORY2.0 7.3 7.4 7.8 8.3 8.7 - - -2.5 7.6 7.7 8.2 8.7 9.1 - - -3.0 7.9 8.0 8.5 9.1 9.5 - - -3.5 8.2 8.2 8.9 9.4 9.9 - - -

RADIUS FOR 7° TRAJECTORY2.0 - - - 7.3 7.8 8.1 8.4 -2.5 - - - 7.7 8.2 8.6 8.9 -3.0 - - - 8.1 8.5 8.9 9.3 -3.5 - - - 8.4 8.9 9.3 9.6 -


FLOW GALLONS PER MINUTE FOR SB1.59 mm 51 Drill 50 Drill 1.98 mm 44 Drill 2.38 mm 2.78 mm 3.18 mm 3.57 mm 3.97 mm

m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps1.5 - - 0.14 0. 04 0,15 0.04 0.19 0.05 0.23 0.06 0.27 0.07 0.37 0.10 0.48 0.13 0.61 0.17 0.75 0.212.0 0.14 0.04 0.16 0.04 0.17 0.05 0.22 0.06 0.26 0.07 0.31 0.09 0.42 0.12 0.55 0.15 0.70 0.20 0.87 0.242.5 0.15 0.04 0.18 0.05 0.19 0.05 0.24 0.07 0.29 0.08 0.35 0.10 0.47 0.13 0.62 0.17 0.79 0.22 0.97 0.273.0 0.17 0.05 0.20 0.05 0.21 0.06 0.27 0.07 0.32 0.09 0.38 0.11 0.52 0.14 0.68 0.19 0.86 0.24 1.06 0.303.5 0.18 0.05 0.21 0.06 0.23 0.06 0.29 0.08 0.34 0.10 0.41 0.11 0.56 0.16 0.73 0.20 0.93 0.26 1.15 0.324.0 0.20 0.05 0.23 0.06 0.25 0.07 0.31 0.08 0.36 0.10 0.44 0.12 0.60 0.17 0.78 0.22 0.99 0.28 1.23 0.34

BARS @NOZZLE

Sprinkler FlowMetric Units

Performance DataThrow / Flow Data


3/4" IMPACT SPRINKLERSPERFORMANCE DATA

U.S. STANDARD DATA

Sprinkler ThrowU.S. UnitsGENERAL NOTEPerformance data areobtained under ideal testconditions and may beadversely affected by wind,hydraulic conditions, andother factors.NOTE ADiameters are based on a30"/76cm riser height.

Sprinkler FlowU.S. Units

GENERAL NOTEWhen using range nozzlesizes 15/64", 1/4", 17/64",and 9/32" / 5.59mm,6.35mm, 6.75mm, and7.14mm with vanes, see14070H tables for accurateflow data.

Flow for keyhole nozzles is thesame as for straight bore nozzles; throw diameters areapproximately 5% less thanstraight bore nozzles.

RADIUS OF THROW FT. FOR STRAIGHT BORE NOZZLES

7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32"

30 39 39 40 42 44 45 48 49 50 51 51 5240 39 40 41 44 46 48 51 52 53 54 55 5650 40 41 42 45 47 50 53 55 56 57 58 5960 41 42 43 46 48 51 55 57 58 60 61 6270 41 43 44 47 49 52 57 59 60 62 63 6580 42 43 45 48 50 53 58 61 62 65 - -


RADIUS OF THROW FT. FOR STRAIGHT BORE NOZZLES WITH VANES

7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32"

30 40 42 43 45 46 47 51 54 54 55 55 5540 40 43 45 47 48 50 54 56 57 59 59 6050 41 44 46 49 50 53 56 58 60 62 63 6460 42 45 47 50 51 54 57 60 62 64 66 6870 43 46 48 51 53 55 58 62 64 66 69 7180 44 47 50 52 55 56 60 63 66 69 - -


FLOW GPM FOR SB NOZZLE WITH 3/32" SPREADER

1/8" X 3/32" 9/64" X 3/32" 5/32" X 3/32" 11/64" X 3/32" 3/16" X 3/32" 13/64" X 3/32" 7/32" X 3/32"

30 3.9 4.6 5.3 6.1 7.0 7.9 9.040 4.5 5.2 6.1 7.0 8.1 9.2 10.550 5.0 5.9 6.8 7.9 9.0 10.3 11.760 5.5 6.4 7.4 8.6 9.9 11.2 12.670 5.9 6.9 8.1 9.3 10.7 12.0 13.480 6.4 7.5 8.7 10.0 11.5 12.9 14.5


FLOW GPM FOR SB NOZZLE WITH 1/8" SPREADER

1/8" X 1/8" 9/64" X 1/8" 5/32" X 1/8" 11/64" X 1/8" 3/16" X 1/8" 13/64" X 1/8" 7/32" X 1/8" 15/64" X 1/8" 1/4" X 1/8" 17/64" X 1/8" 9/32" X 1/8"

30 5.0 5.6 6.4 7.2 8.1 9.1 10.1 11.2 12.4 13.7 15.140 5.7 6.5 7.3 8.3 9.3 10.5 11.7 13.0 14.4 15.8 17.450 6.4 7.3 8.2 9.3 10.4 11.7 13.1 14.5 16.1 17.7 19.560 7.0 7.9 9.0 10.1 11.4 12.8 14.3 15.9 17.6 19.4 21.370 7.5 8.5 9.7 10.9 12.3 13.8 15.4 17.2 19.0 21.0 23.080 8.0 9.1 10.3 11.6 13.1 14.8 16.5 18.4 20.3 - -


FLOW GALLONS PER MINUTE FOR STRAIGHT BORE NOZZLES

7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32"

30 1.9 2.5 3.1 3.9 4.7 5.6 6.6 7.6 8.8 10.0 11.2 12.640 2.2 2.9 3.6 4.5 5.4 6.4 7.6 8.8 10.1 11.5 13.0 14.650 2.4 3.2 4.1 5.0 6.1 7.2 8.5 9.8 11.3 12.9 14.5 16.360 2.7 3.6 4.4 5.5 6.6 7.9 9.3 10.8 12.4 14.1 15.9 17.870 2.9 3.8 4.8 5.9 7.2 8.5 10.0 11.6 13.4 15.2 17.2 19.280 3.1 4.1 5.1 6.3 7.7 9.1 10.7 12.4 14.3 16.3 - -


3/4" ImpactSprinklers




METRIC DATA

Sprinkler ThrowMetric UnitsGENERAL NOTEPerformance data are obtained underideal test conditions and may be adversely affected by wind, hydraulicconditions, and other factors.


19mm ImpactSprinklers

RADIUS OF THROW M FOR STRAIGHT BORE NOZZLES

2.78 mm 3.18 mm 3.57 mm 3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.56 mm 5.95 mm 6.35 mm 6.75 mm 7.14 mm2.0 11.7 12.1 12.5 13.0 13.4 13.8 14.3 14.7 15.2 15.8 15.6 15.72.5 11.8 12.3 12.8 13.3 13.8 14.3 14.8 15.4 16.0 16.7 16.4 16.73.0 12.0 12.5 13.1 13.6 14.1 14.7 15.3 16.0 16.7 17.5 17.2 17.53.5 12.2 12.7 13.3 13.8 14.4 15.1 15.8 16.5 17.3 18.2 17.8 18.24.0 12.3 12.9 13.5 14.1 14.7 15.4 16.1 16.9 17.8 18.8 18.5 18.94.5 12.5 13.0 13.7 14.3 15.0 15.7 16.5 17.3 18.3 19.4 19.0 19.55.0 12.6 13.2 13.8 14.5 15.2 16.0 16.8 17.7 18.7 19.9 19.6 20.05.5 12.7 13.3 14.0 14.7 15.4 16.2 17.1 18.0 19.1 20.4 - -

PRESSURE(BARS) @ NOZZLE

RADIUS OF THROW M FOR STRAIGHT BORE NOZZLES WITH VANES

2.78 mm 3.18 mm 3.57 mm 3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.56 mm 5.95 mm 6.35 mm 6.75 mm 7.14 mm

2.0 12.0 12.6 13.1 13.7 14.3 14.8 15.4 15.9 16.4 16.9 16.6 16.62.5 12.3 12.9 13.5 14.1 14.7 15.4 16.0 16.6 17.2 17.7 17.7 17.73.0 12.5 13.2 13.8 14.5 15.2 15.8 16.5 17.2 17.8 18.4 18.5 18.73.5 12.8 13.4 14.1 14.8 15.5 16.2 17.0 17.7 18.4 19.1 19.3 19.64.0 13.0 13.6 14.4 15.1 15.8 16.6 17.4 18.1 18.9 19.6 20.0 20.54.5 13.2 13.9 14.6 15.4 16.2 17.0 17.8 18.5 19.3 20.0 20.7 21.35.0 13.4 14.1 14.8 15.6 16.4 17.3 18.1 18.9 19.7 20.5 21.3 22.15.5 13.6 14.3 15.1 15.9 16.7 17.5 18.4 19.2 20.0 20.8 - -

PRESSURE(BARS) @ NOZZLE



METRIC DATA


Sprinkler FlowMetric Units

GENERAL NOTEWhen using range nozzlesizes 15/64", 1/4", 17/64",and 9/32" / 5.59mm,6.35mm, 6.75mm, and7.14mm with vanes, see14070H tables for accurateflow data.

Flow for keyhole nozzles is thesame as for straight bore nozzles; throw diameters areapproximately 5% less thanstraight bore nozzles.

19mm ImpactSprinklers

FLOW FOR STRAIGHT BORE NOZZLES2.78 mm 3.18 mm 3.57 mm 3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.56 mm 5.95 mm 6.35 mm 6.75 mm 7.14 mm

BARS @

Nozzle m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps

2.0 0.42 0.12 0.55 0.15 0.70 0.19 0.87 0.24 1.05 0.29 1.25 0.35 1.47 0.41 1.70 0.47 1.96 0.54 2.23 0.62 2.50 0.70 2.83 0.782.5 0.47 0.13 0.62 0.17 0.78 0.22 0.97 0.27 1.17 0.33 1.40 0.39 1.64 0.46 1.90 0.53 2.19 0.61 2.49 0.69 2.80 0.78 3.14 0.873.0 0.52 0.14 0.68 0.19 0.86 0.24 1.06 0.29 1.28 0.36 1.53 0.42 1.80 0.50 2.08 0.58 2.40 0.67 2.73 0.76 3.07 0.85 3.44 0.963.5 0.56 0.16 0.73 0.20 0.93 0.26 1.15 0.32 1.39 0.39 1.65 0.46 1.94 0.54 2.25 0.63 2.59 0.72 2.95 0.82 3.32 0.92 3.72 1.034.0 0.60 0.17 0.78 0.22 0.99 0.28 1.22 0.34 1.48 0.41 1.76 0.49 2.07 0.58 2.41 0.67 2.76 0.77 3.15 0.87 3.55 0.99 3.98 1.114.5 0.64 0.18 0.83 0.23 1.05 0.29 1.30 0.36 1.57 0.44 1.87 0.52 2.20 0.61 2.55 0.71 2.93 0.81 3.34 0.93 3.77 1.05 4.24 1.185.0 0.67 0.19 0.88 0.24 1.11 0.31 1.37 0.38 1.66 0.46 1.97 0.55 2.32 0.64 2.69 0.75 3.09 0.86 3.52 0.98 3.99 1.11 4.49 1.255.5 0.71 0.20 0.92 0.26 1.16 0.32 1.44 0.40 1.74 0.48 2.07 0.57 2.43 0.67 2.82 0.78 3.24 0.90 3.69 1.02 - - - -

FLOW FOR SB NOZZLE WITH 2.38 MM SPREADER3.18 mm 3.57 mm 3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.56 mm

Bars @ x 2.38 mm x 2.38 mm x 2.38 mm x 2.38 mm x 2.38 mm x 2.38 mm x 2.38 mmNozzle m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps

2.0 0.93 0.26 1.05 0.29 1.19 0.33 1.35 0.38 1.53 0.43 1.74 0.48 1.97 0.552.5 1.03 0.29 1.17 0.33 1.33 0.37 1.51 0.42 1.71 0.48 1.94 0.54 2.19 0.613.0 1.13 0.31 1.28 0.36 1.46 0.40 1.66 0.46 1.88 0.52 2.12 0.59 2.39 0.663.5 1.22 0.34 1.39 0.38 1.58 0.44 1.79 0.50 2.02 0.56 2.28 0.63 2.57 0.714.0 1.30 0.36 1.48 0.41 1.69 0.47 1.91 0.53 2.16 0.60 2.44 0.68 2.73 0.764.5 1.38 0.38 1.58 0.44 1.79 0.50 2.03 0.56 2.29 0.64 2.58 0.72 2.88 0.805.0 1.46 0.41 1.67 0.46 1.90 0.53 2.15 0.60 2.42 0.67 2.71 0.75 3.02 0.845.5 1.54 0.43 1.76 0.49 1.99 0.55 2.25 0.63 2.53 0.70 2.83 0.79 3.15 0.87

FLOW FOR SB NOZZLE WITH 3.18 MM SPREADER3.18 mm 3.57 mm 3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.56 mm 5.95 mm 6.35 mm 6.75 mm 7.14 mm

Bars @ x 3.18 mm x 3.18 mm x 3.18 mm x 3.18 mm x 3.18 mm x 3.18 mm x 3.18 mm x 3.18 mm x 3.18 mm x 3.18 mm x 3.18 mmNozzle m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps m3/h lps

2.0 1.11 0.31 1.25 0.35 1.43 0.40 1.61 0.45 1.81 0.50 2.03 0.57 2.26 0.63 2.50 0.70 2.77 0.77 3.04 0.85 3.37 0.942.5 1.24 0.34 1.40 0.39 1.59 0.44 1.80 0.50 2.02 0.56 2.27 0.63 2.53 0.70 2.80 0.78 3.11 0.86 3.43 0.95 3.77 1.053.0 1.36 0.38 1.54 0.43 1.74 0.48 1.97 0.55 2.21 0.61 2.48 0.69 2.77 0.77 3.07 0.85 3.41 0.95 3.77 1.05 4.13 1.153.5 1.46 0.41 1.66 0.46 1.88 0.52 2.12 0.59 2.38 0.66 2.68 0.74 2.99 0.83 3.32 0.92 3.68 1.02 4.07 1.13 4.46 1.244.0 1.56 0.43 1.77 0.49 2.00 0.56 2.26 0.63 2.54 0.71 2.86 0.79 3.20 0.89 3.55 0.99 3.94 1.09 4.33 1.20 4.76 1.324.5 1.65 0.46 1.88 0.52 2.12 0.59 2.39 0.66 2.69 0.75 3.03 0.84 3.39 0.94 3.77 1.05 4.17 1.16 4.57 1.27 5.05 1.405.0 1.73 0.48 1.97 0.55 2.24 0.62 2.52 0.70 2.84 0.79 3.20 0.89 3.57 0.99 3.98 1.10 4.39 1.22 4.78 1.33 5.32 1.485.5 1.82 0.50 2.06 0.57 2.34 0.65 2.63 0.73 2.98 0.83 3.35 0.93 3.74 1.04 4.17 1.16 4.60 1.28 - - - -



Technical Guides

Technical GuidesHydraulic Formulas


Hydraulic Formulas for SprinklersDISCHARGE FROM NOZZLES

PRECIPITATION

VELOCITY

U.S. (gpm)

U.S.

gpm = P x D2 x 29.82 x C

D = gpm

C x P x 29.82

V = P.00674

P = gpm

C x D2 x 29.82

2

V = .408 x G.P.M.

D2

gpm = gallons per minuteD = Diameter of nozzle in inchesP = Pressure in pounds per square inchC = Coefficient of discharge

V = Velocity in feet per secondP = Pressure in pounds per square inchD = Diameter of pipe or nozzle in inches

U.S. (gpm)

Pr. =

Pr. = Precipitation in inches per hourA = Area (distance between sprinklers on

line x distance between lines) (ft)gpm = Gallons per minute

METRIC (m3/hr)

m3/hr = P x D2 x .04 x C

D = m3/hr

C x P x .04

P = m3/hr

C x D2 x .04

2

m3/hr = Cubic meters per hourD = Diameter of nozzle in millimetersP = Pressure in barsC = Coefficient of discharge

METRIC (lps)

lps = P x D2 x .0111 x C

D = lps

C x P x .0111

P = lps

C x D2 x .0111

2

lps = Liters per secondD = Diameter of nozzle in millimetersP = Pressure in barsC = Coefficient of discharge

gpm x 96.3A

gpm =Pr. x A96.3

METRIC (m3/hr)

Pr. =

Pr. = Precipitation in millimeters per hourA = Area (distance between sprinklers on

line x distance between lines) (m)m3/hr = Cubic meters per hour per sprinkler

m3/hr x 1000A

m3/hr =Pr. X A1000

METRIC (lps)

Pr. =

Pr. = Precipitation in millimeters per hourA = Area (distance between sprinklers on

Line x distance between lines) (m)lps = Liters per second per sprinkler

lps x 3600A

m3/hr =Pr. X A3600

P= .00674 x V2

METRIC

V = P.01419

V = 9547 x lps

D2

2652 x m3/hrD2

P = .01419 x V2

V = Velocity in meters per secondP = Pressure in barsD = Diameter of pipe or nozzle in millimeters

=

NOTES A column of water 1 foot high equals .4331 pounds pressure [A column of water 1 meter high equals 0.098 bars]. 1 pound pressure equals a column of water 2.309 feet high [1 bar pressure equals a column of water 10.20 meters high]. 1 acre equals 43,560 square feet. 1 acre inch equals 27,154 gallons. 1 cubic foot equals 7.48 gallons. 1 liter per second equals 15.85 gallons per minute. 1 m3/hr equals 4.403 gallons per minute. 1 bar equals 14.50 psi (approximately 100 kPa). 1 millimeter equals 0.394 inches. The height of an equilateral triangle is .866 times its base. The discharge of a nozzle is in proportion to the square of its diameter andthe square root of the pressure.

POWER FORMULA 1 H.P. = 550 foot pounds per second

= 746 watts or 0.746 KW = 1 second foot of water falling 8.8'

Water H.P. = Second foot of water x head in feet 8.8

= Gal. per min. of water x head in feet3960

Brake H.P. = Water H.P.Eff. of pump

1 kilowatt (kw) = 1000 watts= 1,341 H.P. = 737.5 foot pounds per second

Technical GuidesDistribution Uniformity


Distribution Uniformity (DU) is a measure of howevenly water is applied across a field duringirrigation. For example, if one inch of water isapplied in one part of the field and only half an inchis applied in another part of the field, that is poorDU. DU is expressed as a percentage between 0and 100%, although it is virtually impossible toattain 100% in practice. DUs of less than 70% areconsidered poor, DUs of 70 - 90% are good, andDUs greater than 90% are excellent. In short, badDU means that either too much water is applied,costing unnecessary expense, or too little water isapplied, causing stress to crops.

Irrigation Efficiency is different than DU. IrrigationEfficiency refers to how well the irrigator matcheswater applications to crop water need, andgenerally answers the question of how much to apply, and how often. This is generallyreferred to as irrigation scheduling. For instance if a crop needs 24” per year and theirrigator applies close to that amount (less any distribution inefficiencies) then theirrigation efficiency would be high. In contrast, if the irrigator applied 48” per year with ahigh DU system, and the crop really only needed 24”, the irrigation efficiency would bevery low, nearly 50%.

Obviously, there must be good DU before there can be good irrigation efficiency, if thecrop is to be sufficiently watered. So although good DU alone is no guarantee of goodirrigation efficiency, it is a good place to start.

Following are profile views of two adjacent sprinklers in a field and the root zoneunderneath them. The spray patterns from the adjacent sprinklers must overlap to re sultin the same amount of water falling in all parts of the field.

In the figures, the horizontal, dashed line depicts the depth of the actual soil waterdeficit at irrigation. This is the amount of water that the grower applies to soak into thesoil to satisfy crop water use requirements. The dark brown area depicts the actual depthof water infiltrated during the irrigation. Over irrigation is indicated whenever the actualdepth of irrigation is below the soil water deficit line (the horizontal, dashed line).Conversely, under-irrigation is indicated whenever the actual depth of irrigation line isabove the soil water deficit.

Distribution UniformityFor Sprinkler Irrigation

FIGURE 2: Depiction of irrigation resulting in poor DU and insufficient irrigation inparts of the field.

In Figure 1, the farmer has irrigated to sufficientlywater the entire field. The poor DU, indicated by theuneven infiltrated water, has resulted in excessivewatering in some areas of the field. That is, morewater was applied than necessary to satisfy thecrop.

As a simple example, let’s say the field in Figure 1requires 400 acre-feet of water and that the cost ofwater is $10/acre-foot. Currently, the farmer isapplying 500 acre-feet of water to ensure that thecenter of the field is adequately watered. If thefarmer’s system had a better DU, he could reducehis water output by 100 acre-feet. His waterexpense would decrease from $5000 to $4000giving him a savings of $1000. It is also likely that amore even application of water would result in ahealthier, more consistent crop with higher yieldand quality.

In Figure 2, the farmer has acted to preventexcessive watering by shortening run times,without any other changes. But as a result part ofthe field now remains under-irrigated. Althoughunder-irrigation prevents waste, it is undesirablebecause the crop will likely suffer from lack of water.In addition, salts may not be properly leached fromthe root zone leading to further crop decline.Using the same example as above, the farmer hascut back his run time and is now applying 400 acre-feet to his field, but because his system lacks a highDU, the center of the field is now being underwatered. Before he cut back his run-time, thefarmer’s field generated $50,000 of revenue. Nowthat crop stress exists, the field is only generating$40,000 worth of revenue. So although the farmeris saving $1,000 in water expenses, he is losing$10,000 of revenue for a total loss of $9,000.

FIGURE 1: Depiction of irrigation resulting in poor DU and excessive watering.

Figures 3 and 4 show that good DU allows for moreeven applications of water, but in the case of Figure3, irrigation efficiency is poor because more waterwas applied than was needed.

Again, using our example field, the farmer is nowusing a well-designed and maintained sprinklersystem that provides good DU and the potential forhigh irrigation efficiency. He should be able toapply 400 acre-feet of water evenly throughout hisfield, allowing for healthy crops and even betteryields. However, because the farmer is running thesystem twice as long as necessary, the potential isnot realized. He is now applying 800 acre-feet ofwater, doubling his water expense to $8,000 andputting his crops at risk.

Figure 4 depicts good irrigation. Both the DU is high (even application) and the depth isright (irrigation efficiency). The field has been slightly over irrigated but this is probablynecessary to leach salts from the soil profile. In this case, the farmer has applied the rightamount of water and has not been forced to waste money to over irrigate, nor has hebeen forced to sacrifice revenue by under irrigating and producing a substandard crop.

DU may be determined theoretically by using sprinkler uniformity software, or it can bedetermined by taking actual irrigation application measurements in the field.

In either case, The Center for Irrigation Technology (CIT) has software and guidelines tohelp farmers and designers achieve the best DU possible. More information can befound on CIT’s website http://cati.csufresno.edu/cit as well ashttp://www.rainbird.com/pdf/ag/SprCU.pdf andhttp://www.rainbird.com/pdf/ag/SPACE.pdf

Much of this information was provided by The Center for Irrigation Technology and supplemented by Rain Bird Corporation.

FIGURE 3: Depiction of irrigation resulting in good DU but poor irrigation efficiency.

FIGURE 4: Depiction of irrigation sufficiently watering the entire field with good DUand irrigation efficiency.

Remember: better DU means moreprofits through cost savings,healthier crops and better yields.Measure your DU now and see whichcategory you fall into: below 70%:bad, 70-90%: good, or above 90%:excellent.





LFTM Series Sprinkler Quick ReferenceUniformity Pro™ Software

In their efforts to accurately predict sprinkler performance, irrigation designprofessionals, dealers and distributors, on-site farmers, and orchardist irrigation systemoperators have traditionally relied on “rules of thumb” and various manufacturers’diameter/radius of throw versus pressure data charts. These methods were also used topredict sprinkler patterns and application rates before or after sprinklers were installed ina agricultural applications. As we all know, no one spacing fits all crops or applications.Different crops demand different sprinkler spacings to be successful in our ever changingagricultural communities.

Now there is a revolutionary new WEB based design tool to assist in the proper productselection of sprinklers for almost any agricultural application.

Introducing UNIFORMITY PRO™ from Rain Bird.With a few simple but critical data entry inputs from the user, specific to your sprinklerdesign requirements, this tool will quickly and correctly take the guess work out of thesprinkler selection process and select the ideal sprinkler configuration for your specificproject.

Access Rain Bird’s Uniformity Pro™Software at

www.rainbird.com/ag/lfdu

Step 1: New users must register to use the software by providing valid contactinformation. Registered users simply enter their email address to login.

Step 2: Select US Standard or Metric units(Note for customers outside of the US: ensurethat your Microsoft Windows settings arechanged to the English language and usesperiods instead of commas to denote decimalplaces. These settings can be changed via theRegional Settings in the Control Panel.)

Step 3: Select your application / crop typefrom the drop down menu. If your applicationis not listed, check the box for “other” and typeyour crop into the supplied field.



Your selections are listed at the top of thereport, followed by a table of LF™ SeriesSprinkler combinations. The results are

listed from highest to lowest DU.

Step 4: Select your head and row spacing. Also, select your spac-ing type. (To select multiple entries, hold down the Ctrl key and

click on your selections.)

Step 5: Select the flow rate OR the precipitation rate OR thepreferred nozzle size. (Note: More results are produced when you

pick a range of numbers. If you do not have a preference, make surethe “All” box is checked.)

Step 6: Select the LF™ Series deflector(s) OR the preferred throwheight. (If you do not have a preference, make sure the

“All” box is checked.)

Step 7: Select the pressure. Note: The default setting is to have allof the pressures selected.

No Entries are required for this field. Uniformity Pro™ will selectthe best LF™ Series drive unit based on your inputs.

Optional Step: If you have a specific DU, CU, or SC in mind, you maymake a selection here.

Note: Common values are the default settings.

Once you have made all of your selections, click on “See Results”to produce your report.

Frost Protection Guide By SprinklingUtilizing ImpactSprinklers for Frost Protection:Application of water by sprinklers to protect cropsfrom radiation frost damage is utilized onthousands of acres where adequate water isavailable. Radiation frosts may occur on clear, calmnights, usually following the passage of a cold frontin the previous twenty-four to forty-eight hours.The term "radiation frost" is used to differentiate itfrom "wind-borne freeze" which describes a below-freezing air mass moving through the area.

Water offers an economical, pollution-free methodof frost protection if a grower has a sprinklersystem. The heat released for frost protection, whenwater is applied through sprinklers, depends uponthe temperature of the water applied and the amount of water which is converted to ice.When water cools to 32° F, one BTU per degree per pound of water is released to theatmosphere. When 32° water is changed to 32° ice, 144 BTU per pound is released. This istermed heat of fusion.

The significance of these figuresmay be seen from the followingcalculations:

For comparison, the heat releasedby 20 return stack heaters, eachburning 3/4 gallon of fuel oil perhour =2,250,000 BTU/hour

Two methods of sprinkler frostprotection are utilized:

1) Undertree Protection2) Overhead Protection

Each method has its place and itslimitations.

1 Undertree Protection:

Undertree protection is usedmainly in deciduous trees, in areaswhere low dew points do notgenerally occur. Where low dew point or high evaporation potential situations occur,undertree frost protection is not recommended. It may in fact be detrimental because ofsuper-cooling due to the evaporation which takes place under those conditions. Thelatent heat of vaporization is over 7 times the heat of fusion, and this causes the coolingto take place. This means that in order to maintain a temperature, 7 times as much watermust be freezing as is evaporating. The lower the dew point, the greater the potential forevaporation.

The amount of protection from an undertreesystem depends on the amount of water applied.An application of 40 gpm per acre will give atemperature increase of 4-5° F, if the dew point isabove 32°. The temperature to which this willprotect a crop depends upon the stage of growthand the sensitivity of the variety to frost damage.For example, most almonds will be damaged at 30°F during the milk or small nut stage. The samevarieties will show about equal damage at 26° F inthe full bloom stage and less damage in the pinkstage. An application rate of 0.089 inches/hour or40 gpm/acre is recommended for protection. Moresprinklers per acre give better protection from agiven quantity of water. For example, it is better tohave 20 sprinklers per acre with 2 gpm each than tohave 10 sprinklers per acre with 4 gpm each. Bestresults are obtained with pressures near the top ofthe recommended range for a sprinkler.

On most spring nights there is relatively little iceformed undertree to give heat for protection. Thetype of protection achieved must therefore bedifferent from that of ice encasement (as inoverhead protection). In the majority of cases, thetrees are enveloped in rising columns of fog. Theincreased atmospheric moisture reduces the netoutgoing radiation of ground surface heat, andkeeps the temperature in a protected block fromdropping as low as in an unprotected area. Higherrates of application are required on the borders offield, particularly on the upwind side.

2 Overhead Protection:

Overhead protection utilizes the heat of fusion tomaintain a temperature of 31-32° F in the ice

Heat Released by Water CoolingFrom 62° to 32° F

0.01 acre inches per hour releases 68,000 BTU/hour

0.05 acre inches per hour releases 340,000 BTU/hour

0.10 acre inches per hour releases680,000 BTU/hour

Heat Released by ChangingFrom 32° Water to 32° Ice

0.01 acre inches per hour releases360,000 BTU/hour

0.05 acre inches per hour releases 1,630,000 BTU/hour

Heat Released by 0.10 Acre Inchesof 62° F Water, of Which Half

or 0.05 Acre Inches Freezes680,000 + 1,630,000

= 2,310,000 BTU/hour

Technical GuidesFrost Protection


encased tissue of the plant. The degree of protection is greater than with undertree, but more water per acre is required. Ice is an excellentthermal conductor, so the temperature of the surface of the ice encasement is rapidly reflected at the plant tissue. Maintaining a temperature of31-32° at the ice surface depends upon supplying water to that surface at regular rapid intervals to maintain an ice/water interface there. As longas a film of water surrounds ice-coated vegetation, the temperature of the ice and vegetation cannot go below 32° F.

Therefore, the frequency of wetting and the speed of rotation of the sprinklers are of great importance in obtaining the maximum protectionfrom the minimum amount of water. For example, with an application rate of 0.11 inch/hour (50.0 gpm per acre), with a wind 3.4 mph, an airtemperature of 32° F, and a wet bulb temperature of29° F, a leaf edge drops from 37° F to 29° F in about 50seconds. It drops to 32° in about 25 seconds.Comparisons of 30 and 60 second rotation times showthat from 29° down to23° F, the equivalent protection can be obtained with0.02 inches per hour less water with 30 secondrotation time. This is a saving of 9 gpm per acre due torotation time of 30 seconds, instead of 60 seconds.

Frost systems in grapes designed on 0.12 inches/hour(54.3 gpm/acre), utilizing Rain Bird® sprinklers (with arotation time of 15 to 60 seconds) have protecteddown to 23° with dew points of 25° or higher. For eachdegree the dew point is below 25°, an additional 0.01inch per head should be applied above the 0.12”/hour.For example, to protect 23 °F with a dew point of 22°,would require the application of 0.15 inch/per hour.

When a sprinkler system is first turned on, there is areduction in temperature due to evaporative cooling.The magnitude of the drop depends upon the relativehumidity of the air in the area to be protected. Anindication of the potential temperature drop can berelated to dew point in the area.

Table 1 indicates turn on temperatures required forvarious dew points to prevent evaporative cooling tobelow 31° F.

TABLE 1In the absence of dew point information, wet bulb temperature may be used tostart the system. The system should be turned on at 32° F wet bulb temperature.It should not be turned off until the wet bulb temperature is at least 34° F, andhigher if there is a wind blowing to cause evaporation.

Technical GuidesFrost Protection


Dew point Temperature

Air Temperature at which Sprinklers Should be Started

(0-500 ft. elev.)15° 39°16° 39°17° 38°18° 38°19° 37°20° 37°21° 37°22° 36°23° 36°24° 35°25° 35°26° 34°27° 34°28° 33°

Gallons per Minute Required from each Sprinkler for Different Sprinkler Spacings and Application Rates

SprinklerSpacing (feet)

Number ofSprinklers per

acre

Application Rate (inches per hour)

0.08 0.09 0.10 0.11 0.125 0.15 0.20

30 x 30 48 0.75 0.84 0.93 1.03 1.17 1.40 1.87

30 x 40 36 1.00 1.12 1.24 1.37 1.56 1.87 2.50

30 x 50 29 1.25 1.40 1.56 1.72 1.95 2.34 3.12

30 x 60 24 1.50 1.68 1.87 2.06 2.34 2.80 3.74

40 x 40 27 1.33 1.49 1.66 1.82 2.04 2.49 3.32

40 x 50 22 1.66 1.87 2.08 2.29 2.60 3.12 4.16

40 x 60 18 1.99 2.24 2.49 2.74 3.11 3.74 4.98

60 x 60 13 2.98 3.36 3.73 4.10 4.66 5.60 7.45

Gallons per minute needed for Various Application Rates for each Acre to be Frost Protected

Application Rate (inches / hour) 0.08 0.09 0.10 0.11 0.125 0.15 0.20

Gallons per minute per acre 39 43 48 53 60 73 97

Impact Sprinkler Head Types:Spoon-Driven, Wedge-Driven,and Precision Jet (PJ™).

Principal of OperationOn spoon-driven sprinklers, (Figure 1) thewater passes through the body (1), thenthrough the nozzle (2), past the sloping vane (3),through the window (4) into the curve of thespoon (5). The reactionary force of the waterleaving the spoon drives the arm out of thestream and away from the nozzle. The tensionof the arm spring (6) then pulls the arm backinto the original position where it impacts onthe bridge or nozzle, causing the sprinkler to turn. The impact is accentuated by thethickness and angle of the leading edge of the sloping vane.

This impact is only sufficient to cause a small degree of travel so that the rotation ofsprinkler is uniform and relatively slow (one-half to three minutes per revolution,depending on pressure and size of sprinkler and nozzle). Slow rotation keeps wear onmoving parts at a minimum and prolongs the life of the sprinkler.

Wedge-drive sprinklers (such as the Rain Bird 14V) operate in the same manner exceptthat the wedge rather than a spoon serves to force the arm in or out of the water stream.The chief advantages of the wedge are that it prevents an excessive amount of waterfrom being deposited just below the sprinkler, and that it provides a greater driving forcethat rotates these sprinklers satisfactorily with smaller size nozzles.

Rain Bird patented Precision Jet (PJ™)sprinklers operate in a manner similarto a spoon-drive sprinkler with the PJtube replacing the spoon. When thearm enters the stream, the water isdirected through a tube. The back forceof the water exiting the tube is along aline away from the fulcrum and,therefore, the arm is kicked back out ofthe stream. The advantage of theprecision jet sprinkler is that side splashis eliminated. The PJ feature is used onpart circle sprinklers that are placedadjacent to areas not to be watered.

Cause of Sprinkler Failure or Faulty Operation Through many years of experience, wehave found the conditions whichinterfere with the proper operation ofRain Bird sprinklers. The following itemsoutline these conditions in detail andprovide the necessary steps to resumeproper sprinkler operation

Maintenance GuideImpact Sprinklers

1 Foreign Objects in Irrigation Water

If the sprinkler does not contain a streamstraightener (small vaned device inside sprinkler inthe nozzle, or just behind nozzle), soft materialsmay be removed from obstructed nozzles byinserting a coated or covered piece of wire, such asa pipe cleaner, through the nozzle while thesprinkler is operating. Care should be taken to avoidscratching the nozzle opening. If this fails, thenozzle should be removed and cleaned. Sprinklerscontaining stream straighteners should not becleaned with a wire because of the possibility ofdamaging the vanes on the straightener. It isrecommended that the nozzle and straightener beremoved and cleaned.

The best guarantee against nozzle pluggingproblems is to adequately screen the water where itenters the system. Where water is derived fromirrigation ditches, screening at the intake is anecessity. Information on types ofscreening/filtering devices may be obtained fromyour Rain Bird distributor.

Technical GuidesMaintenance Guide


How Impact Sprinklers Operate

FIGURE 1

2 Oil or Pipe Dope

Rain Bird sprinklers are WATER LUBRICATED and must NOT be oiled in any manner. Oilcauses the bearing washer to swell and soften and affects the rotation of the sprinkler,frequently bringing it to a complete stop. Pipe dope or thread lubricant contains oil, andwhen applied to the bearing threads is carried to the washer, saturating it and causingthe sprinkler to stop turning. If oil has been applied to the sprinkler, it will be necessary todisassemble the bearing and wipe the oil off the sleeve and nipple and replace thewasher(s) with a new, clean one.

Bearing washers are composed of material which provides the friction necessary for thesuccessful operation of the sprinkler. As stated previously, Rain Bird sprinklers are WATERLUBRICATED and all materials used in their construction are anti-rust and anti-frictionmetals, except the bearing washer.

3 Improper Pressure

Rain Bird sprinklers are designed and adjusted to operate over fairly wide pressureranges depending on the model. When operating on pressure that is either too high ortoo low, the performance will be unsatisfactory both as to sprinkler rotation and waterdistribution. Operating a nozzle at too low of a pressure will result in large droplets and adistribution of most of the water around the outer edge of the pattern. If the pressure isextremely low the sprinkler may fail to rotate. In the case of too high a pressure, thenozzle will tend toward misting and even slight wind currents will carry the water away

from the desired pattern. Extremelyhigh pressure could cause thesprinkler arm to strike the back ofthe sprinkler body, causing thesprinkler to stand still or turnbackwards. In general, as nozzle sizeincreases, so must the pressure fordesired performance.

4 Measuring Water Pressure

The nozzle pressure of a sprinkler ismeasured with a pilot tube while thesprinkler is in operation.

The pitot tube is used with apressure gauge a shown in Figure 2.When used to measure theoperating pressure of a sprinkler,where more than one sprinkler isoperating on one pipe line or lateral,the curved end the tube is insertedinto the stream 1/16" from nozzle.

When measuring the operatingpressure the curve end of the tubemust be held approximately 1/16”out from the nozzle opening and inthe center of the stream. (Figure 3)This is done so that the flow of water

from the individual sprinkler will not be retarded, thus building up the pressure. Move the curve end of the tube back and forth through the stream until the highestpressure is recorded. Do not insert the pitot into the orifice.

All pressures indicated in this manual and our catalog are pressures at the sprinkler,which may differ considerably from pressures at a distant source from which water issupplied. Small diameter pipe or hose will reduce pressure considerably. Failure of asprinkler to perform properly when pressure is lower than recommended for a particularsize nozzle may be overcome by changing to a smaller size nozzle. However, it is not

advisable to use a nozzle smaller than the minimumrecommended size for the particular sprinkler model.To illustrate, sprinkler Model No. 30W failing tooperate properly with a 3/ 64 ” nozzle may give verysatisfactory performance with a 9/64” nozzle.

On the ADJ models, an adjustable pin is used on thenozzle extension- see Figure 4. At pressures from 30pounds up, the pin should not be set into the streamas far as when the sprinkler is operating at lowerpressures (20 to 30 pounds). For these low pressures,you can adjust the pin so as to secure the desiredbreak-up of the stream. This pin also can be adjustedto shorten the throw of the stream, where it isdesirable to use the sprinkler in a smaller area.

The DC nozzle is used for controlling distance ofthrow. It is operated by adjusting the deflectordownward into the water stream to decrease thedistance of throw as desired.

FIGURE 2Pitot Tube - 41017and Gauge - RBGL 100



FIGURE 3Pilot tube shown properly inserted into sprinkler nozzle.

(Approx. 1/8" from nozzle opening)

DC NOZZLE

Adjusting Screw & Spring

Nozzle

Nozzle

ADJ NOZZLE

Deflector

FIGURE 4

FIGURE 5

Spring Holes

Stream

Section A-ANozzle

5 Damaged Parts

Occasionally sprinkler parts may be bent byaccident. Cast bronze and aluminum alloy, usedin Rain Bird parts, are pliable to certain limits.These parts can usually be bent back into shapeif they are not too badly damaged.

In the case of bending of a model 20 or 25 arminto shape after it has been damaged, it shouldbe done so the vane “x” fits flat on the nozzlesurface and so the stream will enter the window“y” as show in Figure 5.

A good rule of thumb for adjusting a bent arm is to bend it so that when the arm is atrest, the vane “x” (Figure 5) is just to the left of the nozzle opening when viewed towardthe nozzle face with the sprinkler in an upright position.

6 Broken Arm Spring

To replace arm spring, pull the fulcrum pinwith a pair of large diagonals or sidecutting pliers as show in Figure 6. The pinis pressed into the body and will come outwhen pulled as show in sketch. Cut thespring loose and remove parts.

Feed end of spring through the holes inthe arm, as shown in Figure 7, in thefollowing way.

Holding the arm in your hand with the cup part of the spoon facing you, and spoon endof arm pointed to your right, feed end of springinto hole on your right (hole nearest spoon) thenon through the hole on the left from the backside. The end of the spring is now pointingtoward you. Bend over end (approximately 1/4”)using needle nose pliers (see Figure 7). Thespring wire is normally longer than required.Hold arm with spoon end pointing toward you(looking down on top of arm). Cut off the tag endof the spring at the center line of the arm. Nowinstall arm in body as shown in Figure 7. Drivefulcrum pin into lower hole with hammer. Pullarm around as far back as it will go, away fromnozzle and feed upper end of spring into thehole that is farthest from the nozzle. Then feed through the other hole so it extendsabout 1/8” and bend this extended spring end over sharply to clinch. Check theassembled spring to be sure that the spring end does not rub against the center bearingof the arm or the spring coils when it rotates (see Figure 7).

Arm weights for some sprinkler mo els are available from Rain Bird distributors anddealers in order to adjust for proper spring tension. To check spring tension with the arm weight, hang the weight over the outer lip of the spoon, with the sprinkler held in asideways position. The weight should deflect the leading edge of the spoon below thenozzle opening but not beyond the hex point on the outside of the nozzle. If an armweight is not available check the arm tension with that of a new sprinkler or with onethat is operating satisfactorily.

If possible, water test sprinkler. Bring pressure upslowly to ensure that arm does not stick in stream.Also, try to hold arm in stream to see if it will comeout and oscillate of it’s own accord.

7 Worn Bearing Washer

Inspect bearing washer (normally black),periodically and replace if worn or damaged. Failureto make needed replacements of these parts willresult in damage to the more expensive BearingNipple and Sleeve.

8 Worn Wear Washers

The Bearing Sleeve is threaded on the lower end forattachment of the sprinkler to the piping system.The bottom of the lower end of a TNT style bearing(see Figure 10) is machined in such a shape as to fita T-shaped wear washer. Because of this fit the wearwasher should not turn in the Sleeve recess. Thebottom of the lower end of the Sleeve is a seat only,



FIGURE 6

Pry Down

FIGURE 7

Bend Ends Inside Arms

Spoon End of Arm

FIGURE 8

Use of Arm Weight

H Style Bearing

FIGURE 9

Stainless SteelWasher

Bearing Nipple

Wear Washer

Top Seal Washer

Bearing Spring

Bearing Sleeve

Bearing Washers

Wear Washer Bearing Washer

FIGURE 10

TNT Style Bearing

FIGURE 11

Universal BearingWrench



not a wearing surface, which is also true for theSleeve in the H style bearing. Note that the Hstyle wear washer is flat and is locateddifferently than the water washer for the TNTstyle bearing (see Figure 9). Check the wear washer periodically and replaceif worn or damaged. Failure to replace willdamage the much more expensive BearingNipple and Sleeve.

9 Replacing Bearings

A special wrench (Figure 11) is made to fit allBearing Nipples and to unscrew them from thebody. This wrench should be available at yourRain Bird dealer; however, if you can not secureone, a small bar or large screwdriver may beused to unscrew the bearing. Be cautious whenplacing the sprinkler in a vise, not to squeeze the arm or other extended parts use thebody. Washers that are worn thin from sand and other abrasives in the water should bereplaced.

10 Trip Mechanism on Part Circle Models

Model No. 25 Sand-Cast Trip Models-Bronze ColorThe trip spring (Figure 12) is about the only item in this assembly that may need to bereplaced after extended use. To reach this spring, pull off the whole assembly after firstremoving clip. Cut the spring loose from the upper trip casting and replace with a newone in the same position.

After bending the spring, be sure there is not too much wire left. If there is, cut the endoff so that it won’t rub against the lower trip casting. The assembly must be put togetherbefore it goes on the shaft.

Be sure spacer washers are in place as shown in Figure 12. Some water causes limedeposits, which should be cleaned off. Lime deposits can cause the mechanism to stickafter a few years use.

Model No. 25 Powered Metal trip Models-Yellow ColorRemoving and replacing the trip spring for these sprinklers is the same in every respectas for sand cast trip models expect that the spring is held in place by a preform on oneleg of the spring. No bending and cutting of the wire is required. The new spring isinstalled by pressing the spring leg with the preform through the appropriate hole andthen following the above instructions for the sand-cast trip models.

Models No. 35 and No. 65DAlthough somewhat different in their parts, the operation of these models is basically thesame as the No. 25.

11 Setting Part Circle Friction Collars

The purpose of the friction collars is to control thearc of the circle of coverage. On the 25, 35, and 65D,the collars must be moved with the fingers only.Never use pliers in setting these collars. Use of plierswill cause the collars to lose their tension and, aftera few settings, they will no longer hold theirposition.

SPRINKLER REPAIR SERVICE

If, after following the directions in this manual, yourRain Bird sprinkler does not operate properly, take itto your dealer or distributor for servicing. If they donot have the facilities for necessary repairs, contactthe factory for the nearest authorized servicingfacility.

DO NOT USE OIL • GREASE • PIPE DOPE

RAIN BIRD SPRINKLERS ARE WATER LUBRICATED

FIGURE 12

Bearing Washer

Trip Washers

E-Ring

Micro-Quick™ Sprays & Micro-Bird® Spinners

The Micro-Quick Sprays and Micro-Bird Spinner families can be ordered fully assembled or as individual components.

• To place an order in the United States call (800) HELLO AG (435-5624) or use the Toll-FREE Fax Ordering number at (800) 843-4162.

• Customers outside the U.S. can contact the International Customer Service Department at (520) 878-2400 to place an order.

For Micro-Quick Sprays:1. Select your spray pattern

2. Use the table provided to find the appropriate nozzle

3. Select your tubing assembly length (either 24” or 36”)

4. Build your model number using the scheme below

MQ 24 RS 05AA

MQ = Micro-Quick

24 = 24'' Tubing Assembly36 = 36'' Tubing Assembly

RS = Red StakeBS = Black Stake

AA = A pattern x A patternAC = A pattern DOWN x C pattern UPAE = A pattern DOWN x E pattern UPBC = B pattern DOWN x C pattern UPBE = B pattern DOWN x E pattern UPDC = D pattern DOWN x C pattern UPDE = D pattern DOWN x E pattern UPEF = E pattern DOWN x F pattern UPEG = E pattern DOWN x G pattern UPCA = C pattern DOWN x A pattern UPEA = E pattern DOWN x A pattern UPCB = C pattern DOWN x B pattern UPEB = E pattern DOWN x B pattern UPCD = C pattern DOWN x D pattern UPED = E pattern DOWN x D pattern UPFE = F pattern DOWN x E pattern UPGE = G pattern DOWN x E pattern UP

05 = 5 gph nozzle – black08 = 8 gph nozzle – orange12 = 12 gph nozzle – blue14 = 14 gph nozzle – violet17 = 17 gph nozzle – green24 = 24 gph nozzle – red33 = 33 gph nozzle – white


How to Order from the Micro-Quick Sprays and Micro-Bird Spinners Section

Micro-QuickSpraysWater Application for a Young Tree vs. a Mature Tree

Reversible Deflector

Nozzle

Transfer Barb

Adaptor

Stake

Transfer Tubing Just flip over the

two-sided deflector fora different pattern. All components are

protected by UVinhibitors and resist

agricultural chemicals.

[EDDE

Pattern "E"

Pattern "D"

Young Tree

Mature Tree

15 ft (4.5m)

3 ft (0.9m)

Rain Bird Micro-Quick features two-sided deflectors. You can use a small diameter pattern to irrigate a young tree, then flip the deflector over toget maximum distance to irrigate the tree through maturity.

Micro-Quick Sprays & Micro-Bird SpinnersMicro-Quick Sprays


A Micro-Quick™ system leads to efficient use of water, chemicals and energy, and reduced labor, inventory and management time needed tomake system modifications for various growing conditions. Micro-Quick sprays are the only micro sprays available with reversible dual pattern

deflectors and a selection of deflector pattern combinations available to meet your specific application requirements.

Micro-Quick

• No tools are required to remove and re-install nozzle/deflector on thebayonet mount.

• Nozzle or deflector assembly is easily removed for cleaning. • Quickly change the nozzle or deflector assembly to achieve a higher

flow rate or different spray pattern.• The taper bore nozzle design prevents debris from clogging the orifice

and makes it easier to clean.

• All nozzles are color-coded.• With no moving parts, Micro-Quick is virtually maintenance free.• Upright (upward spraying) or inverted (downward spraying) nozzle/deflector

position available. • The transfer tubing offers maximum flexibility, durability and

kink-resistance.• Wide flow range from 3.7 GPH (13.8 l/h) to 30.6 GPH (115.7 l/h).

Features and Benefits

360˚- STAR BIRD™PATTERN

PROPORTIONALBUTTERFLY PATTERN

120˚ FAN SPRAYPATTERN

360˚- 24 STREAMPATTERN

DOWN SPRAYPATTERN

NOTCHEDPATTERN

RECTANGULARPATTERN

A B C

D E F G

Nozzle Watering Patterns



1015202530

3.74.65.25.96.5

5.66.98.09.2

10.0

7.39.1

10.611.813.2

9.711.813.715.517.2

10.713.315.517.419.1

14.217.320.122.426.0

17.221.025.227.930.6

1015202530

1015202530

1015202530

1015202530

1015202530

1015202530

3.03.03.03.03.0

3.03.03.03.03.0

3.03.03.03.03.0

3.03.03.03.03.0

3.03.03.03.03.0

3.03.03.03.03.0

3.03.03.03.03.0

8.59.5

10.511.011.5

8.09.5

11.011.011.0

15.017.019.024.025.0

4.04.55.05.35.5

17.519.221.023.025.0

4.55.05.56.06.5

4.55.36.06.57.0

5.05.56.06.07.0

6.06.06.06.57.0

6.57.07.57.57.5

7.58.39.09.49.5

13.015.017.020.023.0

12.014.015.518.020.5

11.012.513.515.818.0

9.511.012.513.514.5

13.013.514.014.515.0

17.017.518.018.018.0

19.020.020.520.521.0

21.022.022.523.023.5

23.025.528.028.028.0

25.026.027.028.028.0

8.010.011.011.512.0

7.58.59.09.5

10.0

7.58.59.59.5

10.0

9.510.010.511.512.0

10.011.512.012.513.0

10.512.012.513.013.5

11.512.513.013.514.0

11.013.014.515.015.5

10.011.512.512.513.0

11.013.014.515.015.5

13.016.017.018.019.0

15.015.019.020.021.0

16.018.019.521.022.0

18.021.023.024.025.0

9.010.011.012.013.0

6.06.57.07.58.0

7.08.09.0

10.010.5

8.09.09.5

10.511.0

8.59.5

10.011.011.5

9.010.010.511.012.0

11.012.013.013.514.0

13.014.014.515.516.0

12.013.515.016.518.0

15.016.518.020.523.0

15.517.519.522.024.0

16.018.520.523.025.0

18.520.522.024.025.5

21.022.523.525.026.0

10.011.012.012.513.0

12.513.514.014.014.5

14.515.516.017.017.5

16.517.518.519.520.5

17.018.520.021.523.0

18.020.021.523.525.0

19.021.023.025.027.0

Dual Pattern Configurations

[AA

1. Specify deflector pattern to be installed down in the operational position by listing de-sired pattern letter first i.e., "AC"=360° Star Bird installed down in the operational posi-tion, with 120° Fan Spray installed up.

2. Specify transfer tubing length: 24" (61cm), 36" (91cm), 48" (122cm), or 60" (152cm).

Note: 1 bar = 14.5 psi; 1 meter = 3.281 ft; 1 liter = 0.264 gal

ftftNOZZLE

QN-33White0.068”

QN-05Black0.026”

QN-08Orange

0.033”

QN-12Blue

0.038”

QN-14Violet0.044”

QN-17Green0.048”

QN-24Red

0.057”

gphpsi ft ft ft ft ft

PRES. FLOW

C

ft ft

DIAMETER

A B

LENGTH WIDTH RADIUS DIAMETER

D

DIAMETER

E

DIAMETER

F G

LENGTH WIDTH

MODEL(nominal nozzle

diameter)

Micro-Quick™ Sprays Performance Data and Stake Assembly

Recommended Filtration (Mesh, Microns): QN-05 (200, 74), QN-08 (170, 93), QN-12 (150, 105), QN-14 (130, 118), QN-17 (120, 125), QN-24 (100, 150), QN-33 (80, 180)

U.S. STANDARD DATA



AC CA

[AE EA

[BC CB

[BE EB

[DC CD [FE

EF [GE EG

[DE ED

0.751.001.501.752.00

13.817.219.822.324.5

21.026.330.134.637.8

27.634.540.044.749.9

36.544.652.058.765.0

40.550.558.565.972.3

53.965.676.084.998.4

65.179.595.3

105.7115.7

0.751.001.501.752.00

0.751.001.501.752.00

0.751.001.501.752.00

0.751.001.501.752.00

0.751.001.501.752.00

0.751.001.501.752.00

0.90.90.90.90.9

0.90.90.90.90.9

0.90.90.90.90.9

0.90.90.90.90.9

0.90.90.90.90.9

0.90.90.90.90.9

0.90.90.90.90.9

2.62.93.33.43.5

2.42.93.23.43.4

4.65.16.37.07.3

1.21.41.61.61.7

5.45.86.67.17.5

1.41.51.71.82.0

1.41.61.92.02.1

1.51.71.81.92.1

1.81.81.92.02.1

2.02.22.22.32.3

2.32.52.82.92.9

4.04.55.56.06.8

3.64.25.05.56.1

3.33.74.04.85.3

2.93.33.84.04.2

3.73.84.34.44.5

5.15.35.45.55.5

5.86.16.36.36.4

6.46.76.97.07.1

7.17.88.28.58.5

7.67.98.38.48.5

2.43.03.33.53.7

2.32.62.72.93.0

2.32.62.92.93.0

2.93.03.23.53.7

3.03.53.73.84.0

3.23.73.84.04.1

3.53.84.04.14.3

3.44.04.44.64.7

3.03.53.83.84.0

3.44.04.44.64.7

4.04.95.25.55.8

4.65.25.86.16.4

4.95.55.96.46.7

5.56.47.07.37.6

2.73.03.33.64.0

1.802.002.102.252.40

2.12.42.7

3.013.2

2.42.72.93.23.3

2.62.93.03.33.5

2.73.03.23.33.7

3.33.73.94.14.2

3.94.24.44.74.9

3.64.14.65.05.4

4.65.05.46.27.0

4.75.35.96.77.3

4.95.66.27.07.6

5.66.26.77.37.7

6.46.97.17.67.9

3.03.33.63.84.0

3.84.14.24.24.4

4.44.74.95.15.3

5.05.35.65.96.2

5.15.66.16.57.0

5.46.16.57.17.6

5.86.47.07.68.2

1. Specify deflector pattern to be installed down in the operational position by listing de-sired pattern letter first i.e., "AC"=360° Star Bird installed down in the operational posi-tion, with 120° Fan Spray installed up.

2. Specify transfer tubing length: 24" (61cm), 36" (91cm), 48" (122cm), or 60" (152cm).

Note: 1 bar = 14.5 psi; 1 meter = 3.281 ft; 1 liter = 0.264 gal

mmNOZZLE

QN-33White

1.73mm/0.068”)

QN-05Black

0.66mm

QN-08Orange0.84mm

QN-12Blue

0.97mm

QN-14Violet

1.12mm

QN-17Green

1.21mm

QN-24Red

1.45mm

l/hbar m m m m m

PRES. FLOW

C

m m

DIAMETER

A B

LENGTH WIDTH RADIUS DIAMETER

D

DIAMETER

E

DIAMETER

F G

LENGTH WIDTH


diameter)

Micro-Quick™ Sprays Performance Data and Stake Assembly

Recommended Filtration (Mesh, Microns): QN-05 (200, 74), QN-08 (170, 93), QN-12 (150, 105), QN-14 (130, 118), QN-17 (120, 125), QN-24 (100, 150), QN-33 (80, 180)

METRIC DATA



Dual Pattern Configurations

[AA

AC CA

[AE EA

[BC CB

[BE EB

[DC CD [FE

EF [GE EG

[DE ED

Micro-Bird® Spinners

1 bar = approx. 100 kPa.

GENERAL NOTE: Performance data are obtained under ideal test conditions and may be adversely affected by wind,hydraulic conditions, and other factors.

*Flow and diameter are based on pressure at the base of theMicro-Bird Spinner and a 6 in. (15cm) riser height.

Micro-Bird® Spinner

Micro-Bird® Adaptor

Flow Pressure Loss (psi) Flow Presssure Loss (bar)

(gph) 24” 36” (l/h) 61cm 91cm

TRANSFER TUBE ASSEMBLY PRESSURE LOSS CHART

05 0.2 0.2 20 0.01 0.0210 0.6 0.8 40 0.04 0.0615 1.2 1.7 60 0.10 0.1320 2.2 3.0 80 0.17 0.2325 3.3 4.5 100 0.25 0.3530 4.7 6.4 120 0.36 0.4935 6.2 8.5 140 0.48 0.65

U.S. UNITS METRIC UNITS

Performance Data*

SP30-340 Orange

(1.73mm/0.068”)

SP12-340Blue

(0.99mm/0.039”)

SP16-340 Green

(1.21mm/0.048”)

SP24-340 Red

(1.45mm/0.057”)

340˚


diameter)

FiltrationRequirements

mesh(Microns)

15 10.1 18 1.0 38.0 5.620 11.6 19 1.5 45.0 6.025 12.9 20 2.0 53.0 6.430 14.1 21 2.5 58.0 6.635 15.3 21 3.0 65.0 6.840 16.3 22

150(105)

15 15.1 20 1.0 57.0 6.020 17.4 21 1.5 67.0 6.625 19.4 22 2.0 80.2 7.030 21.2 23 2.5 86.3 7.235 22.8 23 3.0 95.0 7.240 24.2 24

120(125)

15 20.9 21 1.0 79.0 6.420 24.1 23 1.5 95.0 7.025 26.9 24 2.0 110.0 7.430 29.3 24 2.5 118.0 7.630 31.4 25 3.0 130.0 7.840 33.3 25

100(150)

15 28.9 23 1.0 110.0 7.020 33.4 24 1.5 129.0 7.625 37.2 26 2.0 153.0 8.030 40.5 26 2.5 164.0 8.235 43.3 27 3.0 180.0 8.440 45.8 27

80(180)

PRES Flow Dia PRES Flow Dia(bar) (gph) (ft) (bar) (l/h) (m)

All components are protected by UVinhibitors and resist agricultural chemicals.



The Micro-Bird II Spinner is a low-flow, micro-sprinkler ideal for applications of mature trees, greenhouses, nurseries, gardens, and landscapes.Micro-Bird IISpinners

• “Tall Bridge” and superior plastic design reduces wear and stalling.• Unique spinner design provides a superior wetted pattern. • “Two-Step” thread configuration to accommodate both large and

small sizes of distribution tubing.• Four color-coded nozzle bodies for easy identification.

• 340˚ pattern design provides uniform coverage without wetting tree trunks.• Low 10˚ trajectory angle to fight wind drift.• Filtration mesh hole size should be approximately 10 times smaller than

nozzle size.

Micro-Quick Sprays & Micro-Bird SpinnersCatalog Numbers


Micro-Quick Sprays and AccessoriesMODEL PART NUMBER DESCRIPTION

TRANSFER ASSEMBLIES INCLUDES QTB INLET BARB, ADAPTOR, TUBING, AND QA GREEN DELRIN ADAPTOR

QTA-24 Q1010024 Transfer Assembly - 24” Tubing

QTA-36 Q1010036 Transfer Assembly - 36” Tubing

DUAL PATTERN REVERSIBLE DEFLECTORS

QD-AA Q10900AA (A) 360 deg 12 Star Bird x (A) 360 deg 12 Star Bird

QD-AC Q10900AC (A) 360 deg12 Star Bird x (C) 120 deg Fan Spray

QD-AE Q10900AE (A) 360 deg12 Star Bird x (E) Downspray

QD-BC Q10900BC (B) Proportional Butterfly x (C) 120 deg Fan Spray

QD-BE Q10900BE (B) Proportional Butterfly x (E) Downspray

QD-DC Q10900DC (D) 360 deg 24 Stream x (C) 120 deg Fan Spray

QD-DE Q10900DE (D) 360 deg 24 Stream x (E) Downspray

QD-EF Q10900EF (E) Downspray x (F) Notch

QD-EG Q10900EG (E) Downspray x (G) “R” or rectangular pattern

MICROQUICK NOZZLES

QN-05 Q1080005 05 gph nozzle - black

QN-08 Q1080008 08 gph nozzle - orange

QN-12 Q1080012 12 gph nozzle - blue

QN-14 Q1080014 14 gph nozzle - violet

QN-17 Q1080017 17 gph nozzle - green

QN-24 Q1080024 24 gph nozzle - red

QN-33 Q1080033 33 gph nozzle - white

QNP Q1080099 Nozzle plug

MICROQUICK STAKES

QS-BLACK Q10700 Black stake

QS-RED Q11700 Red stake

ADAPTORS, CONNECTORS, BULK TRANSFER TUBING AND ACCESSORIES

QA Q10400 Micro-Quick Adaptor, barb inlet x snap outlet, green, Delrin

QCA Q11200Conversion Adaptor, barb inlet, 10-32 thread inlet x snap outlet, green, to connectQN/QD assemblies to non-Rain Bird transfer assemblies

MQT-150/050 Q10500 Vinyl tubing , 0.150” I.D. x .050” wall PVC-2000 ft / coil

QTB Q10600 Transfer Barb

QDT Q11400 Micro-Quick Deflector Removal Tool

MBQA Q11000 MBQA Micro-Bird Quick Adaptor

EMA-GP D24695 Line (Goof) Plugs

Micro-Quick Sprays & Micro-Bird SpinnersCatalog Numbers

75

MODEL PART NUMBER DESCRIPTION

MICROQUICK ASSEMBLY XX = DEFLECTOR PATTERN EXAMPLE: AA OR BE, YY = NOZZLE SIZE EXAMPLE: 05 OR 33

MQ24RSxxyy Assembled QTA-24”, QS-RED, QD-xx and QN-yy

MQ36RSxxyy Assembled QTA-36”, QS-RED, QD-xx and QN-yy

MQ24BSxxyy Assembled QTA-24”, QS-BLACK, QD-xx and QN-yy

MQ36BSxxyy Assembled QTA-36”, QS-BLACK, QD-xx and QN-yy

MQ24RS Q11810 Assembled QTA-24” and QS-RED

MQ36RS Q11812 Assembled QTA-36” and QS-RED

MQ24BS Q11811 Assembled QTA-24” and QS-BLACK

MQ36BS Q11813 Assembled QTA-36” and QS-BLACK

TRANSFER ASSEMBLIES INCLUDES QTB INLET BARB, TUBING, AND MBQA BLACK POLYPROPYLENE ADAPTOR

MBQTA24 Q1110024 Transfer Assembly - 24” Tubing

MBQTA36 Q1110036 Transfer Assembly - 36” Tubing

MICRO-BIRD SPINNERS AND ACCESSORIES

MICRO BIRD SPINNERS

SP12-340 A9241112 12 GPH - (Blue) - 340 deg

SP16-340 A9241116 16 GPH - (Green) - 340 deg

SP24-340 A9241124 24 GPH - (Red) - 340 deg

SP30-340 A9241130 30 GPH - (Orange) - 340 deg

MICROBIRD SPINNER ACCESSORIES & TOOLS

MBQA Q11000 MBQA Micro-Bird Quick Adaptor

EMA-GP D24695 Line (Goof) Plugs

STAKES FOR MICROBIRD SPINNERS

QS-BLACK Q10700 Black stake

QS-RED Q11700 Red stake

Micro-Quick Sprays and Accessories

www.rainbird.com/ag

QSStake Only

QTBTransfer Barb

QCAConversion Adaptor

QA Micro-QuickAdaptor

QNNozzle Only

QDDual Deflector only

QTATransfer Assembly

24" & 36"Hose Assembly

MBQA Micro-BirdAdaptor

QDTDeflector Removal Tool

Micro-Quick Parts




Notes

Rain Bird's Professional Customer Satisfaction Policy

Rain Bird will repair or replace at no charge any Rain Bird professional product thatfails in normal use within the warranty period stated below. You must return it to the

dealer or distributor where you bought it. Product failures due to acts of Godincluding without limitation, lighting and flooding, are not covered by this warranty.

This commitment to repair or replace is our sole and total warranty.

Implied Warranties of Merchantability and Fitness, if Applicable, are Limited to One Year from the Date of Sale.

We will not under any circumstances be liable for incidental or consequential damages, no matter how they occur.

AGRICULTURAL PRODUCTSLF™ Series Sprinklers – Five Years

Impact S prinklers – Two YearsAll other agricultural products – One Year

HOW TO ORDER

Toll-free, 800 fax number is available exclusively for fax orders:

(800) 843-4162

Toll-free, 800 phone number is available exclusively for phone orders:

(800) 435-5624

Toll-free, Rain Bird Technical Service (RBTS):

(800) 247-3782

Customers Outside the U.S. call-:

(520) 878-2400

Thank you for choosing Rain Bird. If you have any questions, please contact your Customer Service representative or District Manager for assistance.We welcome any suggestions you may have for making your partnership with Rain Bird AG a pleasant, effective and positive experience.

Rain Bird Corporation970 West Sierra Madre AvenueAzusa, CA 91702Phone: (626) 812-3400Fax: (626) 812-3411

Rain Bird Technical Services(800) 247-3782 (U.S. and Canada)

Rain Bird International, Inc.P.O. Box 37Glendora, CA 91741Phone: (626) 963-9311Fax: (626) 852-7343

www.rainbird.com

Rain Bird Corporation6991 East Southpoint RoadTucson, AZ 85760Phone: (520) 741-6100Fax: (520) 741-6522

Specification Hotline(800) 458-3005 (U.S. and Canada)

*Registered Trademark of Rainbird Corporation© 2008 Rain Bird Corporation 5/08 12345

catalogo productos rain bird

Documents

sprinkler series oers

sprinkler irrigation

sprinkler selections

lf series accessories

water stream

lf accessories

drive assembledwith

drive assembledwith