catalog no. date project type k6sar | 6 led ...16' 5.0 13.3 fixture delivered lumens: 1151.1...
TRANSCRIPT
DATE PROJECT TYPE
CATALOG NO.
REV1220
CONTECH LIGHTING | 725 LANDWEHR ROAD | NORTHBROOK, ILLINOIS 60062 | PHONE 847.559.5500 | www.contechlighting.com© 2020 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.
K6SAR | 6" LED Remodel Non-IC StopAire Downlight
1. TRIAC and ELV dimming for 120V only.2. Lutron Hi-Lume dimming only available in 120V.
1-7/8"
2-15/16"
5-1/4"
15-9/16"
6-15/16"
15"
1. Lumen values are approximate, see photometric test results
WATTAGE
LUMEN OUTPUT1
COLOR TEMPERATURE
CRI
SYSTEM RATING
DRIVER INPUT WATTAGE
DRIVER INPUT CURRENT (A) 120/277
DRIVER INPUT VOLTAGE120V Dimming (Triac, ELV, 0-10V)
277V Dimming (0-10V)Lutron HiLume® Dimming
Lutron EcoSystem® Dimming
DRIVERPower Factor
THD
LISTING
WARRANTY
10W 14W 20W
900Lm 1200Lm 1600Lm
2700K, 3000K, 3500K, 4000K
90+
50,000 Hours @ 70% Lumen Maintenance
10W 14W 20W
.08/.03 .12/.05 .17/.08
120V AC, 50/60Hz277V AC, 50/60Hz120V AC, 50/60Hz120-277V AC, 50/60Hz
> 0.90< 20%
cCSAus Certified to UL StandardsSuitable for damp locationsAll housing options (except those with Lutron dimming options) are ENERGY STAR® Certified with the following trims only:
– CTR3002(-PL, -CLR, -WHT, -BLK)– CTR3002-B-BLK– CTR3001H(-WHT, -P)– CTR3001(-WHT, -P, -B)
Conforms to Washington State Energy code (WSEC) for low air infiltration; tested in accordance with ASTM E283 (2.0 CFM or less)
Five (5) Year Replacement after Date of Purchase
Ceiling Opening: 6-1/2"Ceiling Thickness: 1/2" – 5/8"
P1
Ordering Information
Housing/LED SeriesK6SAR1 - 10W 900lm K6SAR2 - 14W 1200lm K6SAR3 - 20W 1600lm
Electrical/DimmingMVD1 - Triac, ELV, 0-10V12D32 - Lutron Hi-Lume 1% 2-Wire LED Driver (120V Forward Phase Only)MVD4 - Lutron Hi-Lume 1% EcoSystem LED Driver with Soft-on, Fade-to-Black
Beam Dist.S - SpotF - FloodW - Wide Flood
Replacement OpticsK6OPTS - Spot Optic K6OPTF - Flood Optic K6OPTW - Wide Flood Optic
Example Order: K6SAR327KCMVDW
Color TempHigh CRI 90+ 27KC - 2700K30KC - 3000K35KC - 3500K40KC - 4000K
DATE PROJECT TYPE
CATALOG NO.
REV1220
CONTECH LIGHTING | 725 LANDWEHR ROAD | NORTHBROOK, ILLINOIS 60062 | PHONE 847.559.5500 | www.contechlighting.com© 2020 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.
K6SAR | 6" LED Remodel Non-IC StopAire Downlight
P2
Features• Aluminum housing and heat-sink with galvanized steel mounting
arm and junction box; requires minimum 3" clearance around fixture from insulation material. Thermal protection provided in case of improper insulation use.
• Housing secured to ceiling by four (4) spring clamps• Output over-voltage, over-current and short circuit protection• Approved for through-circuit wiring; max: (4) #12 AWG (2 in/2
out); wiring should be rated for at least 90°C• Engineered optical system consists of a thermo-plastic optical
housing, aluminum reflector and highly transmissive diffusion lens• Light engine consists of a single, high output multi-chip LED array• Excellent fixture to fixture color consistency within a 3-step
MacAdam Ellipse tolerance• Many trim options available to complement any design style; see
attached trim spec sheet for information and details
Performance Summary• System provides a smooth uniform beam while eliminating view
of LED array• Three beam distributions available; optics are field interchangeable• All K6SAR LED downlights are available for non-dimming and
dimming applications; for a list of compatible dimmers, refer to the Dimming Specifications sheet
• All housing options (except those with Lutron dimming options) are ENERGY STAR® Certified with the following trims only:– CTR3002(-PL, -CLR, -WHT, -BLK)– CTR3002-B-BLK– CTR3001H(-WHT, -P)– CTR3001(-WHT, -P, -B)
• Conforms to Washington State Energy Code (WSEC) for low air infiltration; tested in accordance with ASTM E283 (2.0 CFM or less)
• Assembled in the USA
WarrantyThis complete fixture is covered by ConTech’s full five (5) year replacement guarantee after date of purchase
Product Details
CTR1912-P Albalite Shower Trim 5" I.D, 8-1/8" O.D.
Wet location listed. Flat Albalite glass. Beveled white steel trim ring. Polyethylene gasket. Two (2) torsion springs.
CTR1913-P Fresnel Shower Light Trim 5" I.D, 8-1/8" O.D.
Wet location listed. Beveled white steel trim ring. Polyethylene gasket. Flat, clear Fresnel glass lens. Two (2) torsion springs.
CTR1916-P Drop Opal Shower Light Trim, Glass Lens5" I.D, 7-7/8" O.D., 1" Drop
Wet location listed. Beveled white steel trim ring. Polyethylene gasket. Two (2) torsion springs.
CTR1916-PP Drop Opal Shower Light Trim, Plastic Lens5" I.D, 7-7/8" O.D., 1-1/2" Drop
Wet location listed. Beveled white high-heat ABS trim ring. Polyethylene gasket. Two (2) torsion springs.
CTR3001H SeriesHelical Phenolic Baffle5-3/4" I.D, 7-1/2" O.D.
Painted Steel Trim Ring. Two (2) coiled springs.
CTR3001 SeriesTapered Steel Baffle5-3/4" I.D, 7-1/2" O.D.
Tapered Steel Baffle. Thermoplastic trim ring. Two (2) coil springs.
CTR3002-B-BLKTapered Steel Specular Reflector5-3/4" I.D, 7-1/8" O.D.
Black Reflector, Black Trim Ring. Two (2) coiled springs.
CTR3002 SeriesTapered Aluminum Reflector5-3/4" I.D, 7-1/8" O.D.
White high heat rated ABS beveled trim ring. Two (2) coiled springs.
CTR3002-WHTWhite Multiplier5-3/4" I.D, 7-1/8" O.D.
White high heat rated ABS beveled trim ring. Two (2) coiled springs.
CTR3001-BBlack Baffle
Black Trim Ring
CTR3001-P Black Baffle
White Trim Ring
CTR3001-WHTWhite Baffle
White Trim Ring
CTR3002-BLKBlack Specular Reflector
White Trim Ring
CTR3002-CLR Clear Specular Reflector
White Trim Ring
CTR3002-PLPlatinum ReflectorWhite Trim Ring
CTR3001H-P Black Baffle
Matte White Trim Ring
CTR3001H-WHTWhite Baffle
Matte White Trim Ring
Trims for K6 Series LED Recessed Downlights
DATE PROJECT TYPE
CATALOG NO.
REV1220
CONTECH LIGHTING | 725 LANDWEHR ROAD | NORTHBROOK, ILLINOIS 60062 | PHONE 847.559.5500 | www.contechlighting.com© 2020 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.
DATE PROJECT TYPE
CATALOG NO.
REV1220
CONTECH LIGHTING | 725 LANDWEHR ROAD | NORTHBROOK, ILLINOIS 60062 | PHONE 847.559.5500 | www.contechlighting.com© 2020 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.
K6SAR | 6" LED Remodel Non-IC StopAire Downlight
Wavelength (nm)380 410 440 470 500 530 560 590 620 650 680 710 740 770
30
15
0
Wavelength (nm)380 410 440 470 500 530 560 590 620 650 680 710 740 770
30
15
0
Wavelength (nm)380 410 440 470 500 530 560 590 620 650 680 710 740 770
30
15
0
0 90°
15°0° 30°
45°8020
4050
12000
75°
60°
0 90°
15°0° 30°
45°1000
550
1400
75°
60°
0 90°
15°0° 30°
45°580
320
800
75°
60°
P3
Candela Curve
Lumen output values fluctuate based on CCT. To estimate lumen output of the various CCT options, multiply 3000K results by the following:
Photometrics
Photometric Multiplication Factors
Intensity Distribution BEAM DISTANCE FOOTCANDLES DIAMETER (FT.) (FC) (FT.)
6' 282.9 1.2
8' 159.2 1.6
10' 101.9 2.0
12' 70.7 2.4
14' 52.0 2.8
16' 39.8 3.2
K6SA230KCMVDS/CTR3002-PLFixture Delivered Lumens: 1096.4Total Watts@120V: 13.6Lumens Per Watt: 80.6Center Beam Candle Power: 10186Beam Distribution: 11°Spacing Criterion: 0.19Color Rendering Index (CRI)1: 92Color Temperature (CCT)2: 3180KDesigned for 50,000 Hour Lamp Life3
LM-63 Test No. G20062903LM-79 Test No. S20070103
Candela Curve Spectral Power Distribution Chart4
Intensity Distribution
BEAM DISTANCE FOOTCANDLES DIAMETER (FT.) (FC) (FT.)
6' 35.5 5.0
8' 20.0 6.7
10' 12.8 8.3
12' 8.9 10.0
14' 6.5 11.6
16' 5.0 13.3
Fixture Delivered Lumens: 1151.1Total Watts@120V: 13.6Lumens Per Watt: 84.6Center Beam Candle Power: 1277Beam Distribution: 45°Spacing Criterion: 0.80Color Rendering Index (CRI)2: 91Color Temperature (CCT)3: 3183KDesigned for 50,000 Hour Lamp Life3
LM-63 Test No. G20062902LM-79 Test No. S20070102
K6SA230KCMVDF/CTR3002-PLSpectral Power Distribution Chart4
Candela CurveIntensity Distribution
BEAM DISTANCE FOOTCANDLES DIAMETER (FT.) (FC) (FT.)
6' 21.5 8.0
8' 12.1 10.7
10' 7.7 13.4
12' 5.4 16.1
14' 3.9 18.7
16' 3.0 21.4
Fixture Delivered Lumens: 1094.5Total Watts@120V: 13.6Lumens Per Watt: 80.5Center Beam Candle Power: 772Beam Distribution: 68°Spacing Criterion: 1.03Color Rendering Index (CRI)2: 91Color Temperature (CCT)3: 3161KDesigned for 50,000 Hour Lamp Life3
LM-63 Test No. G20062901LM-79 Test No. S20070101
K6SA230KCMVDW/CTR3002-PLSpectral Power Distribution Chart4
1. Accuracy of rendering colors 2. Color appearance of light source 3. Dependent on surrounding temperatures 4. Colors present within the light source
CCT SERIES 1 SERIES 2
2700K 0.9 0.57 0.76
3000K 1.0 0.57 0.76
3500K N/A 0.57 0.76
4000K 1.0 0.57 0.76
K4 SERIES* K6 SERIES* Dimming Options MVD Dimming Range
Manufacturer Product Model Light Output
Leviton IllumaTech IPL06-10z 3%-100%
Leviton IllumaTech IPI06-1LZ 17%-100%
Leviton SureSlide R62-6674 17%-100%
Leviton SureSlide R62-6633 >1%-100%
Lutron Skylark NT-600 >1%-100%
Lutron Diva DV600P 1%-100%
Lutron Diva DVLV-600P 3%-100%
Lutron D-600P 3%-100%
Lutron Diva DVCL-153P 2%-100%
Lutron Maestro MACL-153M 3%-100%
Cooper R1061-LA 7%-100%
Cooper Devine DAL06P-C1 >1%-100%
Cooper TAL06P-C1 >1%-100%
Cooper SAL06p >1%-100%
Cooper Decorator DAL06P-C2 >1%-100%
*277V Triac Dimming is not available
• Incandescent 120VAC dimmers adjust the light with “forward phase control”, where the dimmer “chops” the forward part of the AC wave to deliver less or more power to the light source. No neutral wire connection required.
• Electronic vow voltage 120VAC dimmers adjust the light with “reverse phase control,” where the dimmer “chops” the back part of the AC wave to deliver less or more power to the light source. Neutral wire connection required.
• 0-10V DC low voltage dimmers operate using two low voltage dimming wires that are separate from the 120V or 277V AC power. The dimmer sends a variable output voltage to the fixture based upon the dimming level. 10V corresponds to undimmed operation, 5V to 50% and so on. Switching on/off is controlled with the line voltage power (120V or 277V AC) input to the dimmer and then dimming operation is controlled with the 0-10V DC low voltage wiring connection between the dimmer and the LED driver. The control signal runs on two low voltage control wires (color coded violet and gray).
• Lutron HiLume and EcoSystem dirvers provide continuous dimming from 1%-100%. For a complete list of compatible dimmers and controls, please visit www.lutron.com
DIMMING SPECIFICATIONS | K4 and K6 Series
Notes1. Testing was performed with a single fixture connected to dimmer. 2. Testing has been performed on these dimmers, but this does not imply any warranty of compatibility. 3. Dimming performance can be influenced by different loads, as well as variations in dimmer switches within the same model. 4. Dimmer maximum load rating with LED may differ from published traditional source dimmer ratings. Consult manufacturer for maximum dimmer information.5. Consult factory for additional dimming information.
REV1020
CONTECH LIGHTING | 725 LANDWEHR ROAD | NORTHBROOK, ILLINOIS 60062 | PHONE 847.559.5500 | www.contechlighting.com© 2020 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.
DATE PROJECT TYPE
CATALOG NO.