cat08 system-rf gewiss en
TRANSCRIPT
![Page 1: Cat08 System-RF Gewiss En](https://reader030.vdocuments.mx/reader030/viewer/2022020105/553df88b5503468c338b4846/html5/thumbnails/1.jpg)
SYSTEM RF RangeWireless devices
Range of wireless "Command and Control" and Burglar
alarm devices.
• Full integration with existing systems;
• Configuration made extremely easy by acting directly on
the devices;
• Pulse-type data transmission to make the system reliable
and safe;
• Wide coverage of the radio transmission distance between
the devices.
IMP00007 4-04-2008 16:36 Page 219
![Page 2: Cat08 System-RF Gewiss En](https://reader030.vdocuments.mx/reader030/viewer/2022020105/553df88b5503468c338b4846/html5/thumbnails/2.jpg)
220
White GW 20 892Black GW 21 892
White GW 20 893Black GW 21 893
White GW 20 894Black GW 21 894
White GW 20 890Black GW 21 890
White GW 20 992Black GW 21 992
GW 20 966GW 21 966
GW 20 963
White GW 20 993Black GW 21 993
White GW 20 994Black GW 21 994
White GW 20 990Black GW 21 990
RF COMMAND AND CONTROL
COMMAND DEVICES
CHARACTERISTICS
White GW 20 891Black GW 21 891
White GW 20 991Black GW 21 991
- 1 RF channel.- Just one two-position command button for sending differentiated messages. - To be combined with any GEWISS RF actuator.- Powered by 2 AAA batteries.
- 2 RF channels.- Two two-position control buttons for sending differentiated messages.- To be combined with any GEWISS RF actuator.- Powered by 2 AAA batteries.
- 3 RF channels.- Three two-position control buttons for sending differentiated messages.- To be combined with any GEWISS RF actuator.- Powered by 2 AAA batteries.
- 4 RF channels.- Four two-position control buttons for sending differentiated messages.- To be combined with any GEWISS RF actuator.- Powered by 2 AAA batteries.
- 3 RF channels.- 6 command buttons (2 per channel) for sending differentiated messages.- To be combined with any GEWISS RF actuator.- Powered by 2 AAA batteries.
- 1 System module.- It receives signals coming from contacts without potential (push-buttons, one-way switches,
technical alarm contacts, conventional type of thermostats, etc.) and sends radio messages.- To be combined with any GEWISS RF actuator.- 230V ac power supply.
- It has an IR movement sensor and photoelectric cell.- It separately starts the IR, photoelectric, IR+photoelectric function with three different actuators.- To be combined with the single-channel actuators GW 20 980 - GW 21980 and GW 20 981 -
GW 21981.- Powered by 3 AAA batteries.
DESCRIPTION
Push-button panel with Top System or Virna plate supplied as standard:- cloud white for System White- metallic titanium for System Black
Push-button panel with Top System or Virna plate supplied as standard:- cloud white for System White- metallic titanium for System Black
Push-button panel with Top System or Virna plate supplied as standard:- cloud white for System White- metallic titanium for System Black
Push-button panel with Top Systemor Virna plate supplied as standard:- cloud white for System White- metallic titanium for System Black
Radio-frequency remote control
Radio-frequency modulefor conventional inputs
Wireless IR + light-sensitivemovement detector with Top Systemor Virna plate supplied as standard:- cloud white for System White- metallic titanium for System Black
TOP SYSTEM VIRNA
SYSTEM RF RANGE
WIRELESS DEVICES
TRADE CATALOGUE 2008 > DOMOTICS > DOMESTIC RANGES > SYSTEM RF RANGE
SY
ST
EM
RF
RA
NG
E
IMP00007 4-04-2008 16:36 Page 220
![Page 3: Cat08 System-RF Gewiss En](https://reader030.vdocuments.mx/reader030/viewer/2022020105/553df88b5503468c338b4846/html5/thumbnails/3.jpg)
221
GW 20 980 GW 21 980
GW 20 981 GW 21 981
GW 20 982 GW 21 982
DESCRIPTION CHARACTERISTICS
DESCRIPTION CHARACTERISTICS
GW 20 985 GW 21 985
GW 90 822
GSM remote controlRF command/control interface -
Installation from DIN rail
- 5 RF transmission channels, used for communication with RF actuators- 2 RF reception channels, used for communication with RF command devices- 1 RF two-way channel, used for communication with the RF two-way timed thermostats- To be used exclusively in combination with the remote control GW 90 821
RFsignal repeater
- 2 System modules.- Device to be used when the coverage area is insufficient.- The device repeats up to 8 different RF channels.- 230V ac power supply.
CHARACTERISTICS
Output RF modulesfor general loads
- 1 output contact 3A(AC1) / 2A(AC15) with potential 230V.- 1 System module.- To be combined with System RF command devices.- Manual activation, using the button on the front of the actuator or the line entry, for reading a
potential-free contact (e.g. push-buttons, conventional one-way switches).- Possible actuations: Monostable, Bistable and Timed.- 230 V ac power supply.
Output RF modulesfor general loads
- 1 output contact 16A(AC1) / 10A(AC15) potential-free .- 2 System modules.- To be combined with System RF command devices.- Manual activation, using the button on the front of the actuator or the line entry, for reading a
potential-free contact (e.g. push-buttons, conventional one-way switches).- Possible actuations: Monostable, Bistable and Timed.- 230V ac power supply.
Output RF modulesfor motor controls
- 2 output contacts 8A(AC1) / 3A(AC15) with potential 230V.- 2 System modules.- To be combined with System RF command devices for moving roller shutters, sunblinds etc.- Manual activation, using the three buttons (UP, DOWN, AUTO) on the front of the actuator or the
line entry, for reading a potential-free contact (e.g. push-buttons, conventional one-way switches).- Possible actuations: UP, DOWN, Stop.- 230V ac power supply.
DESCRIPTION
- 1 RF transmission channel- To command the boilers, solenoid valves, electrical heating elements, fan coil, etc.- To be combined with the System RF actuators for general loads- Possible remote control via SMS by means of a serial connection with GSM GW 90 821
remote control- Power supply by means of three1.5V AAA alkaline batteries
- 1 RF transmission channel, 1 RF two-way channel- To command the boilers, solenoid valves, electrical heating elements, fan coil, etc.- To be combined with the System RF actuators for general loads- Possible remote control via SMS by means of a two-way RF connection with GSM GW 90 821
remote control equipped with GW 90 822 interface- Power supply by means of three1.5V AAA alkaline batteries
RF timed thermostats.Wall-mounting
RF two-waytimed thermostats.
Wall-mounting
TEMPERATURE ADJUSTMENT
OUTPUT MODULES - ACTUATORS
ACCESSORIES
INTERFACES
GW 14 841GW 10 841
GW 14 851GW 10 851
SYSTEM RF RANGE
WIRELESS DEVICES
TRADE CATALOGUE 2008 > DOMOTICS > DOMESTIC RANGES > SYSTEM RF RANGE
SY
ST
EM
RF
RA
NG
E
IMP00007 4-04-2008 16:36 Page 221
![Page 4: Cat08 System-RF Gewiss En](https://reader030.vdocuments.mx/reader030/viewer/2022020105/553df88b5503468c338b4846/html5/thumbnails/4.jpg)
222
KIT
CO
NTR
OL
UN
ITS
AC
TIV
ATI
ON
DEV
ICES
SYST
EM
DEV
ICES
CODE DESCRIPTION CHARACTERISTICS
GW 20 497
GW 20 470
GW 20 481
GW 20 472
GW 20 473
GW 20 474
GW 20 490
GW 20 480
GW 20 475
Standard RF burglar alarm kit
Control unit for 16 sensors
Control unit for 48 sensorswith built-in telephone dialer
Remote control with 4 buttons
Keyboard
Electronic proximity key
External siren
Signal repeater
System status display module
1 control unit GW 20 4701 remote control GW 20 4722 movement detectors GW 20 477
Keys for programming and control, control LED and indoor built-in siren
Programming keyboard, LCD display for control and indoor built-in siren
Activation, deactivation,partialization and anti-panic
Activation, deactivation, partialization and anti-panic. Incorporated transponder foractivation with electronic proximity key
To be used combined with the keyboard,prevents entering the code
System on-off check from the outside withflashing of the orange optical compartment.
To be combined with the control unitto increase the coverage of the system
System status display on/off
RF BURGLAR ALARM
SYSTEM RF RANGE
WIRELESS DEVICES
TRADE CATALOGUE 2008 > DOMOTICS > DOMESTIC RANGES > SYSTEM RF RANGE
SY
ST
EM
RF
RA
NG
E
IMP00007 4-04-2008 16:36 Page 222
![Page 5: Cat08 System-RF Gewiss En](https://reader030.vdocuments.mx/reader030/viewer/2022020105/553df88b5503468c338b4846/html5/thumbnails/5.jpg)
223
AC
CES
SOR
IES
CODE DESCRIPTION CHARACTERISTICS
GW 20 477
GW 20 478
GW 20 483
GW 20 479
GW 20 493
GW 20 494
GW 20 495
GW 20 499
Adjustable infrared movement detector
External detector
Optical smoke detector
External detector
Cable contact for roller shutters and rolling gates
Plastic magnetic surface contact
Metal magnetic surface contact
Lead for connecting PC control unit
Adjustable, 15m range, 81° opening
With magnetic contact for doors and windows
Ceiling installation
For conventional row contacts
Connect with cable to the external detector forconventional row contacts GW20479
Connect with cable to the external detector forconventional row contacts GW20479
Connect with cable to the external detector forconventional row contacts GW20479
Optional connection cable from the control unit GW 20 470 and GW 20 481 with the serial port of a PCfor storing the system diagram and modifying theoperating parameters
DET
ECTO
RS
SYSTEM RF RANGE
WIRELESS DEVICES
TRADE CATALOGUE 2008 > DOMOTICS > DOMESTIC RANGES > SYSTEM RF RANGE
SY
ST
EM
RF
RA
NG
E
IMP00007 4-04-2008 16:36 Page 223