case study : hsc – hot surface coating · 2014-06-19 · case study : hsc® – hot surface...
TRANSCRIPT
![Page 1: Case Study : HSC – Hot Surface Coating · 2014-06-19 · Case Study : HSC® – Hot Surface Coating Paper Factory International Paper, Poland Done by HTH-Novotech () Temperature](https://reader036.vdocuments.mx/reader036/viewer/2022070904/5f729fa5ab3ff2103b117196/html5/thumbnails/1.jpg)
Case Study : HSC® – Hot Surface Coating
Paper Factory
International Paper, Poland
Done by HTH-Novotech (www.hth-ptt.pl)
Temperature before application was +96 C
We applied 3-4 mm HSC® and Super Therm® as a finish against weathering.
The temperature after application was +46 C
Before
After
Challenge / question
Resolve corrosion and insulate outside tank
Solution
Primer:Rust Grip®
Insulation:3-4mm HSC®
Hot Surface Coating
Top coat:Super Therm®
Benefits Easy to apply Can also be applied
while in operation Instant effect Non-toxic Water-based coating Reduces heat losses saves energy stops corrosion
HSC® is a registered trademark and produced by Superior Products International II Inc
Eagle Specialized Coatings And Protected Enviroments - 18523 Fraser Hwy, Surrey, BC, CANADA V3S 8E7
(604) 576 - 2212(604) 576 - 7773Fax:
Tel: