case studies. research, developmentand innovationin construction. francisco javier cervigon ruckauer
DESCRIPTION
Some relevant examples regarding on-going or past research projects are presented in the document of this Section. As a multimedia resource, an in situ test simulating a rock fall impact on a dynamic barrier is presented.TRANSCRIPT
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Elena Blanco Fernández
This topic is published under License:Creative Commons BY-NC-SA 4.0
Master in European Construction Engineering
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Master in European Construction Engineering2
Case studies.
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Master in European Construction Engineering3
H-KNOW
The project has developed technical solutions based on ICT that are affordable for SMEs, including:
Knowledge sharingCollaboration managementTraining services for engineers
ADVANCED INFRASTRUCTURE FORKNOWLEDGE BASED SERVICES FOR BUILDINGS RESTORING
Financed by 7th Framework Programme of the European Commissionwww.h-know.eu
Total budget: 2,639,582.00 €
Master’s participant: Faculdade de Engenharia Universidade do Porto
Duration: 2008-2011 (3 years)
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Master in European Construction Engineering4
The partners:
H-KNOW
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Master in European Construction Engineering5
H-KNOW
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Master in European Construction Engineering6
LA CIUDAD MULTIDIMENSIONAL
Achieve a sustainable development of construction activities
THE MULTIDIMENSIONAL CITY.Financed by the Ministry of Science and Innovation through ERDF funds
(European Regional Development Fund)www.cimne.com/websasp/geost/
Total budget: 2,639,582.00 €
Master’s participant: Grupo GITECO (Universidad de Cantabria)
Optimize the efficiency in all project phases (design, construction, operation)
Improve the occupational health and safety through training and technological improvements
Consider all aspects of the lifecycle of underground works in an integrated way
Duration: 2008-2012 (4 years)
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Master in European Construction Engineering7
The partners:
Project Leader
Rest of participants
LA CIUDAD MULTIDIMENSIONAL
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Master in European Construction Engineering8
LA CIUDAD MULTIDIMENSIONAL
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Master in European Construction Engineering9
DESIGN OF A NEW PUSHING SYSTEM OF METAL BRIDGES (MIX BRIDGES) WITH CONSTANT SECTION
Financed by the Spanish Ministry of Economy and Competitiveness through ERDF funds (European Regional Development Fund).
www.ptcarretera.es/proyecto_alcanza.html
Total budget: 355,965.00 €
Master’s participant: Grupo GITECO (Universidad de Cantabria)
Apply the pushed-bridge technique to metal or mix bridges with any section
Increase the current span length, from 60m to 150m for pushed-bridges
Increase the pushing velocity from 6m/h to 15m/h
Duration: 2010-2013 (3 years)
ALCANZA
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Master in European Construction Engineering10
ALCANZA
The partners:
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Master in European Construction Engineering11
ALCANZA
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Master in European Construction Engineering12
DEVELOPMENT OF A PREDICTIVE MODEL FOR DYNAMIC BARRIERS BASED ON RESULTS OBTAINED FROM IN SITU TESTS
Financed by the public enterprise SODERCAN, belonging to Regional Government of Cantabria
http://www.mallatalud.com/obracivil/idi.php
Total budget: 75,400.00 €
Master’s participant: Grupo GITECO (Universidad de Cantabria)
Perform in situ test on dynamic barriers simulating rock impacts, including instrumentation
Certificate the barrier according to ETAG-27
Suggest modifications to barrier design according to results
Duration: 2010-2011 (1 year)
DYNAMIC BARRIERS
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Master in European Construction Engineering13
The partners:
DYNAMIC BARRIERS
Module 2. Research, Development and Innovation in Construction
Introduction to Sustainable Construction
Master in European Construction Engineering14
DYNAMIC BARRIERS
Módulo 2. Investigación, Desarrollo e Innovación en la Construcción
Introducción a la Construcción Sostenible
Elena Blanco Fernández
Este tema se publica bajo Licencia:Creative Commons BY-NC-SA 4.0
Master in European Construction Engineering
Módulo 2. Investigación, Desarrollo e Innovación en la Construcción
Introducción a la Construcción Sostenible
Master in European Construction Engineering51
Casos prácticos.
Módulo 2. Investigación, Desarrollo e Innovación en la Construcción
Introducción a la Construcción Sostenible
Master in European Construction Engineering52
H-KNOW
El Proyecto ha desarrollado soluciones técnicas basadas en las TICs que son económicamente viables para PYMEs:
Compartición del conocimientoGestión de la colaboraciónServicios de formación para ingenieros
Presupuesto total: 2.639.582,00 €
Participantes del Master: Faculdade de Engenharia Universidade do Porto
Duración: 2008-2011 (3 años)
INFRAESTRUCTURAS AVANZADAS PARA SERVICIOS BASADOS EN EL CONOCIMIENTO PARA LA RESTAURACIÓN DE EDIFICIOS
Financiado por el Séptimo Programa Marco de la Unión Europeawww.h-know.eu
Módulo 2. Investigación, Desarrollo e Innovación en la Construcción
Introducción a la Construcción Sostenible
Master in European Construction Engineering53
Los socios:
H-KNOW
Módulo 2. Investigación, Desarrollo e Innovación en la Construcción
Introducción a la Construcción Sostenible
Master in European Construction Engineering54
H-KNOW
Módulo 2. Investigación, Desarrollo e Innovación en la Construcción
Introducción a la Construcción Sostenible
Master in European Construction Engineering55
LA CIUDAD MULTIDIMENSIONAL
Alcanzar un desarrollo sostenible de las actividades de construcción
LA CIUDAD MULTIDIMENSIONALFinanciado por el Ministerio de Ciencia e Innovación mediante fondos FEDER
(Fondo Europeo de Desarrollo Regional)www.cimne.com/websasp/geost/
Presupuesto total: 2.639.582,00 €
Participantes del Master: Grupo GITECO (Universidad de Cantabria)
Optimizar la eficacia en todas las fase del proyecto (diseño, construcción, explotación)
Mejorar la seguridad y salud laboral a través de la formación y mejoras tecnológicas
Considerar todos los aspectos del ciclo de vida de las obras subterráneas de formaintegrada
Duración: 2008-2012 (4 años)
Módulo 2. Investigación, Desarrollo e Innovación en la Construcción
Introducción a la Construcción Sostenible
Master in European Construction Engineering56
Los socios:
Líder del Proyecto
Otros participantes:
LA CIUDAD MULTIDIMENSIONAL
Módulo 2. Investigación, Desarrollo e Innovación en la Construcción
Introducción a la Construcción Sostenible
Master in European Construction Engineering57
LA CIUDAD MULTIDIMENSIONAL
Módulo 2. Investigación, Desarrollo e Innovación en la Construcción
Introducción a la Construcción Sostenible
Master in European Construction Engineering58
DISEÑO DE UN NUEVO SISTEMA DE EMPUJE DE PUENTES METÁLICOS (MIXTOS) Y SECCIÓN CONSTANTE
Financiado por el Ministerio de Economía y Competitividad mediante fondos FEDER (Fondo Europeo de Desarrollo Regional).
www.ptcarretera.es/proyecto_alcanza.html
Presupuesto total: 355.965,00 €
Participantes del Master: Grupo GITECO (Universidad de Cantabria)
Aplicar la técnica de empuje en puentes metálicos o mixtos de cualquier sección
Incrementar el vano actual de 60m a 150m para puentes empujados
Aumentar la velocidad de empuje de 6m/h a 15m/h
Duración: 2010-2013 (3 años)
ALCANZA
Módulo 2. Investigación, Desarrollo e Innovación en la Construcción
Introducción a la Construcción Sostenible
Master in European Construction Engineering59
ALCANZA
Los socios:
Módulo 2. Investigación, Desarrollo e Innovación en la Construcción
Introducción a la Construcción Sostenible
Master in European Construction Engineering60
ALCANZA
Módulo 2. Investigación, Desarrollo e Innovación en la Construcción
Introducción a la Construcción Sostenible
Master in European Construction Engineering61
DESARROLLO DE UN MODELO PREDICTIVO PARA PANTALLAS DINÁMICAS BASADO EN LOS RESULTADOS OBTENIDOS EN ENSAYOS EN CAMPO
Financiado por la sociedad publica SODERCAN, perteneciente Gobierno de Cantabria
http://www.mallatalud.com/obracivil/idi.php
Presupuesto total: 75,400.00 €
Participantes del Master: Grupo GITECO (Universidad de Cantabria)
Realizar ensayos en campo sobre pantallas dinámicas simulando impactos de roca, incluyendo instrumentación in situ.
Certificar la barrera de acuerdo a la norma ETAG-27
Proponer modificaciones a la pantalla teniendo en cuenta los resultados de los ensayos
Duración: 2010-2011 (1 año)
PANTALLAS DINÁMICAS
Módulo 2. Investigación, Desarrollo e Innovación en la Construcción
Introducción a la Construcción Sostenible
Master in European Construction Engineering62
Los socios:
PANTALLAS DINÁMICAS