cardboard furniture
DESCRIPTION
Cardboard furniture for fairs, exhibitions, temporary shop and showroom Cardboard furniture for fairs, exhibitions, temporary shops and showroomsTRANSCRIPT
FaqIs the Cardboard Furniture fi reproof?No, it’s not, but if you want to use them in fairs or events where certifi cation is required, it will simply increase the fi re load. However, the volume per square meter is so low that it never turns into a problem.
Is it waterproof?No, if cardboard is placed in humid conditions or outdoor loses its natural fi ber.
Can I use it outdoors?It’s your choice, if it rains of course it will loose its static characteristics.
Is it durable?We recommend using it for fairs, exhibitions and temporary events. If stored properly in dry places it can be reused.Is it disassemblable and reassemblable after use?Yes in the case of Panels, Chair and Geodesic Sphere,
in other cases, some users cut the glue with a knife to bring the cardboard sheet to plan, however, is never a clean job and you risk to lose stability.
How much weight does it hold?The tables are tested to around 30 kg of static load, this means that if you put on anything that moves is very likely that the table moves, in this case we suggest you put it against a wall or to fi x it to the fl oor or to another piece of cardboard furniture. The stool is tested for 90 to 100 pounds of distributed weight. In any case, all the all the sharp objects are a problem.
Can I make it stronger?In some cases we decide to wrap the table legs or stools with tape as a skirting to protect them in case of fl oor cleaning with solvents or water close to the furniture or simply to have more stability.
Can I have the pieces already assembled?Yes, in this case does not use e-commerce, but call us,
we will solve your problem.
Can I collect them directly?Yes, in this case does not use e-commerce, but call us, we will solve your problem.
Can you customize the size?Yes, but for numbers greater than 100 pieces, or by paying a surcharge, call for specifi cations.
Can I customize graphics?You can use prespaced stickers, pvc sticker prints, prints on foamcore ® with double-affi xed adhesive or pins. Generally we do not provide customization, but for sure we can help you fi nd the best solution.
Where and how do I get an invoice?The name Cardboard Furniture and product name of ZonaUno®, you will receive an invoice including VAT and postage to the e-mail submitted in the form of payment.
This print respects the environment and didin’t produce CO2: this papaer has been produced with post-consumer recycled fi bers.The thermal energy used to produce this paper has been compensated and it’s completely “No Impact”.
www.mobilicartone.it
Technical Specifi cationsConditioning: 23°C air t. & 50% r.h. 24h - I.S.O. Standard 187Composition: KSFSK/56265/BC
General Information Unity
Thickness mm 7,0
Basis Weight g/m2 870Pounds for sqare feet IbsxM ft2 178
Bursting strenght in kilopascal kPa 1086Mullen Test - Customary value - Pounds-force for square inch Ibf/in2 157
Edge crush testMinimum - E.C.T. kN/m 8,93E.C.T. Verifi ed on latest productions - E.C.T. kN/m 10,2Vertical compression in pounds per inch - E.C.T. Ibs x inch 58,3
Cobb method 30 mins - Cobb g/m2 <155Valore verifi cato su ultime produzioni - Actual Value g/m2 99
www.mobilicartone.it
How can you build fairs, events, temporary shops and showrooms avoiding great waste of material ?
We have a very simple solution that today is affordable by everyone: it’s Cardboard
ECOLOGICALRECYCLEDRECYCLABLELIGHTCHEAPCardboard Furniture is a perfect solution for low-cost and low-impact fairs, exhibitions, shops and showrooms.Triple cardboard is a very light material, easy to transport and assemble, ecological because completely recyclable.Our furniture will arrive via carrier in 15 days from order, fl at and pre-folded, ready to assemble.
Triple cardboard can be customized with prespaced, digital prints, Poliplat® panels with pins, or suspended frames with Nylon® wire and clips.Mobili in Cartone is the fi rst italian company to sell via web a series of products entirely realized with 80% recycled and 100% recyclable cardboard.
When you buy Cardboard Furniture you have done something good for you planet and be in peace with yourself and the others.
Corso Buenos Aires, 37 - 20124 - Milano Italytel. and fax 02/[email protected]
This print respects the environment and didin’t produce CO2:this papaer has been produced with post-consumer recycled fi bers.
The thermal energy used to producee this paper has been compensatedand it’s completely “No Impact”.
Stool
High Stool
A solid parallelepiped with a triangular base, ideal as a stool or small display. The shape allows infi nite combinations: from perfect hexagons to irregular compositions, according to fancy.It matches perfectly with the 75 cm height Table and with the Small Table.
Everything with nothing!
A solid parallelepiped with a triangular base, ideal as a stool or small display. The shape allows infi nite combinations: from perfect hexagons to irregular compositions, according to fancy.It matches perfectly with the 115 cm height Table and with the Computer Panel.
Everything with nothing!
40 cm x 40 cm x h 45 cm
40 cm x 40 cm x h 70 cm
www.mobilicartone.it
www.mobilicartone.it
page 1
page 2
and create your event You throw paper and cardboardin the recycle bin
They are transported to the collecting center and from
there to the paper mill
Here they are treated and recycled for 80%
of the weight
They turn againinto paper and cardboard
Now it’s our turn to cut and fold the cardboard to transform it
into pieces of furniture
You buy Cardboard Furniture from the websitewww.mobilicartone.it
The carrier sends them to the place you choose
You assemble them very easily with hot glue
How does it work ?
Stool
High Stool
Assembling: 2 minutes
Assembling: 2 minutes
Paste between themthe central parts
Folding the fl aps toward the inside
Fold and glue the fi ns of the lid
Close the facilitywith the lid
Paste between themthe central parts
Folding the fl aps toward the inside
Fold and glue the fi ns of the lid
Close the facilitywith the lid
How can you build fairs, events, temporary shops and showrooms avoiding great waste of material ?
We have a very simple solution that today is affordable by everyone: it’s Cardboard
ECOLOGICALRECYCLEDRECYCLABLELIGHTCHEAPCardboard Furniture is a perfect solution for low-cost and low-impact fairs, exhibitions, shops and showrooms.Triple cardboard is a very light material, easy to transport and assemble, ecological because completely recyclable.Our furniture will arrive via carrier in 15 days from order, fl at and pre-folded, ready to assemble.
Triple cardboard can be customized with prespaced, digital prints, Poliplat® panels with pins, or suspended frames with Nylon® wire and clips.Mobili in Cartone is the fi rst italian company to sell via web a series of products entirely realized with 80% recycled and 100% recyclable cardboard.
When you buy Cardboard Furniture you have done something good for you planet and be in peace with yourself and the others.
Corso Buenos Aires, 37 - 20124 - Milano Italytel. and fax 02/[email protected]
This print respects the environment and didin’t produce CO2:this papaer has been produced with post-consumer recycled fi bers.
The thermal energy used to producee this paper has been compensatedand it’s completely “No Impact”.
Stool
High Stool
A solid parallelepiped with a triangular base, ideal as a stool or small display. The shape allows infi nite combinations: from perfect hexagons to irregular compositions, according to fancy.It matches perfectly with the 75 cm height Table and with the Small Table.
Everything with nothing!
A solid parallelepiped with a triangular base, ideal as a stool or small display. The shape allows infi nite combinations: from perfect hexagons to irregular compositions, according to fancy.It matches perfectly with the 115 cm height Table and with the Computer Panel.
Everything with nothing!
40 cm x 40 cm x h 45 cm
40 cm x 40 cm x h 70 cm
www.mobilicartone.it
www.mobilicartone.it
page 1
page 2
and create your event You throw paper and cardboardin the recycle bin
They are transported to the collecting center and from
there to the paper mill
Here they are treated and recycled for 80%
of the weight
They turn againinto paper and cardboard
Now it’s our turn to cut and fold the cardboard to transform it
into pieces of furniture
You buy Cardboard Furniture from the websitewww.mobilicartone.it
The carrier sends them to the place you choose
You assemble them very easily with hot glue
How does it work ?
Stool
High Stool
Assembling: 2 minutes
Assembling: 2 minutes
Paste between themthe central parts
Folding the fl aps toward the inside
Fold and glue the fi ns of the lid
Close the facilitywith the lid
Paste between themthe central parts
Folding the fl aps toward the inside
Fold and glue the fi ns of the lid
Close the facilitywith the lid
How can you build fairs, events, temporary shops and showrooms avoiding great waste of material ?
We have a very simple solution that today is affordable by everyone: it’s Cardboard
ECOLOGICALRECYCLEDRECYCLABLELIGHTCHEAPCardboard Furniture is a perfect solution for low-cost and low-impact fairs, exhibitions, shops and showrooms.Triple cardboard is a very light material, easy to transport and assemble, ecological because completely recyclable.Our furniture will arrive via carrier in 15 days from order, fl at and pre-folded, ready to assemble.
Triple cardboard can be customized with prespaced, digital prints, Poliplat® panels with pins, or suspended frames with Nylon® wire and clips.Mobili in Cartone is the fi rst italian company to sell via web a series of products entirely realized with 80% recycled and 100% recyclable cardboard.
When you buy Cardboard Furniture you have done something good for you planet and be in peace with yourself and the others.
Corso Buenos Aires, 37 - 20124 - Milano Italytel. and fax 02/[email protected]
This print respects the environment and didin’t produce CO2:this papaer has been produced with post-consumer recycled fi bers.
The thermal energy used to producee this paper has been compensatedand it’s completely “No Impact”.
Stool
High Stool
A solid parallelepiped with a triangular base, ideal as a stool or small display. The shape allows infi nite combinations: from perfect hexagons to irregular compositions, according to fancy.It matches perfectly with the 75 cm height Table and with the Small Table.
Everything with nothing!
A solid parallelepiped with a triangular base, ideal as a stool or small display. The shape allows infi nite combinations: from perfect hexagons to irregular compositions, according to fancy.It matches perfectly with the 115 cm height Table and with the Computer Panel.
Everything with nothing!
40 cm x 40 cm x h 45 cm
40 cm x 40 cm x h 70 cm
www.mobilicartone.it
www.mobilicartone.it
page 1
page 2
and create your event You throw paper and cardboardin the recycle bin
They are transported to the collecting center and from
there to the paper mill
Here they are treated and recycled for 80%
of the weight
They turn againinto paper and cardboard
Now it’s our turn to cut and fold the cardboard to transform it
into pieces of furniture
You buy Cardboard Furniture from the websitewww.mobilicartone.it
The carrier sends them to the place you choose
You assemble them very easily with hot glue
How does it work ?
Stool
High Stool
Assembling: 2 minutes
Assembling: 2 minutes
Paste between themthe central parts
Folding the fl aps toward the inside
Fold and glue the fi ns of the lid
Close the facilitywith the lid
Paste between themthe central parts
Folding the fl aps toward the inside
Fold and glue the fi ns of the lid
Close the facilitywith the lid
Chair
Comfortable and robust, made out of 4 locking pieces easy to assemble and disassemble without glue.It perfectly matches with all the 75 cm height Tables and with the Small Table.
In quantity is an unbeatable solutions for fairs and events.
This product can be assembled and disassembled without glue.
45 cm x 45 cm x h 80 cm
Trashcan
Triangular parallelepiped with one or two compartments for the recycling collection.
The only bin that you throw in the recycle bin!
40 cm x 40 cm x h 70 cm
Foldable Stool
Easy to open and close, this little stool is portable, mountable in seconds and reusable.It matches perfectly with the 75 cm height Table and with the Small Table.
Move!
This product can be assembled and disassembled without glue.
35 cm x 35 cm x h 40 cm
page 5
page 4
page 3
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Paste between themthe central parts
Folding the fl aps toward the inside
Fold and glue the fi ns of the lid
Close the facilitywith the lid
Chair
Assembling: 1 minute
Fold the sides of the shorter leg to the inside
Fold the sides of the shorter leg to the inside
Bring your legs so as to match the tips central
Fold the backrest towards the interior
Fold the seat inward Insert back and seated in the slots of the legs
Trashcan
Assembling: 2 minutes
Foldable Stool
Assembling: 30 seconds
Glue the fl ap inward and fl atten the stool completely
Fold the structure inward
Fold and fi t the upper fi ns
Chair
Comfortable and robust, made out of 4 locking pieces easy to assemble and disassemble without glue.It perfectly matches with all the 75 cm height Tables and with the Small Table.
In quantity is an unbeatable solutions for fairs and events.
This product can be assembled and disassembled without glue.
45 cm x 45 cm x h 80 cm
Trashcan
Triangular parallelepiped with one or two compartments for the recycling collection.
The only bin that you throw in the recycle bin!
40 cm x 40 cm x h 70 cm
Foldable Stool
Easy to open and close, this little stool is portable, mountable in seconds and reusable.It matches perfectly with the 75 cm height Table and with the Small Table.
Move!
This product can be assembled and disassembled without glue.
35 cm x 35 cm x h 40 cm
page 5
page 4
page 3
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Paste between themthe central parts
Folding the fl aps toward the inside
Fold and glue the fi ns of the lid
Close the facilitywith the lid
Chair
Assembling: 1 minute
Fold the sides of the shorter leg to the inside
Fold the sides of the shorter leg to the inside
Bring your legs so as to match the tips central
Fold the backrest towards the interior
Fold the seat inward Insert back and seated in the slots of the legs
Trashcan
Assembling: 2 minutes
Foldable Stool
Assembling: 30 seconds
Glue the fl ap inward and fl atten the stool completely
Fold the structure inward
Fold and fi t the upper fi ns
Chair
Comfortable and robust, made out of 4 locking pieces easy to assemble and disassemble without glue.It perfectly matches with all the 75 cm height Tables and with the Small Table.
In quantity is an unbeatable solutions for fairs and events.
This product can be assembled and disassembled without glue.
45 cm x 45 cm x h 80 cm
Trashcan
Triangular parallelepiped with one or two compartments for the recycling collection.
The only bin that you throw in the recycle bin!
40 cm x 40 cm x h 70 cm
Foldable Stool
Easy to open and close, this little stool is portable, mountable in seconds and reusable.It matches perfectly with the 75 cm height Table and with the Small Table.
Move!
This product can be assembled and disassembled without glue.
35 cm x 35 cm x h 40 cm
page 5
page 4
page 3
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Paste between themthe central parts
Folding the fl aps toward the inside
Fold and glue the fi ns of the lid
Close the facilitywith the lid
Chair
Assembling: 1 minute
Fold the sides of the shorter leg to the inside
Fold the sides of the shorter leg to the inside
Bring your legs so as to match the tips central
Fold the backrest towards the interior
Fold the seat inward Insert back and seated in the slots of the legs
Trashcan
Assembling: 2 minutes
Foldable Stool
Assembling: 30 seconds
Glue the fl ap inward and fl atten the stool completely
Fold the structure inward
Fold and fi t the upper fi ns
Inclined Table
A bulletin board with a large display surface for graphics, paintings and objects.
A product for every angle.
60 cm x 200 cm x h 85 cm
Small Table
A place for conversation or negotiations.It prefectly matches with Chair and Stool.
Neither water proof or stain proof, but for sure the more ecological and cheap.A real deal!
58 cm x 58 cm x h 70 cm
Table
A real working plan, solid and capable of supporting up to 30 static kilograms.Available in various heights and lengths.
You might not dance dance on it,but it will work very well for any dinner, trade show or event.A toast for the planet!
60 cm x 100 cm x h 75 cm60 cm x 150 cm x h 75 cm60 cm x 200 cm x h 75 cm
60 cm x 100 cm x h 115 cm60 cm x 150 cm x h 115 cm60 cm x 200 cm x h 115 cm
page 8
page 6
page 7
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Inclined Table
Assembling: 3 minutes
Paste between themthe central partslegs.Do the same for the plan of the table
Folding the fl aps toward the inside
Fold the fl aps of the leg to the outside
Glue the wings to the plane of the legs of the table
Small Table
Table
Assembling: 2 minutes
Assembling: 3 minutes
Paste between themthe central partslegs.Do the same for the plan of the table
Folding the fl aps toward the inside
Fold the fl aps of the leg to the outside
Glue the wings to the plane of the legs of the table
Glue the middle with glue hot
Fold the sidesstructure
Glue the legs with hot glue
Folding the fl aps toward the inside (8 fi ns 4 per side)
Put the glue on the fi ns (on the side you see)
Bending the legs and hold so that the fl aps sticking
parte centralegamba
Inclined Table
A bulletin board with a large display surface for graphics, paintings and objects.
A product for every angle.
60 cm x 200 cm x h 85 cm
Small Table
A place for conversation or negotiations.It prefectly matches with Chair and Stool.
Neither water proof or stain proof, but for sure the more ecological and cheap.A real deal!
58 cm x 58 cm x h 70 cm
Table
A real working plan, solid and capable of supporting up to 30 static kilograms.Available in various heights and lengths.
You might not dance dance on it,but it will work very well for any dinner, trade show or event.A toast for the planet!
60 cm x 100 cm x h 75 cm60 cm x 150 cm x h 75 cm60 cm x 200 cm x h 75 cm
60 cm x 100 cm x h 115 cm60 cm x 150 cm x h 115 cm60 cm x 200 cm x h 115 cm
page 8
page 6
page 7
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Inclined Table
Assembling: 3 minutes
Paste between themthe central partslegs.Do the same for the plan of the table
Folding the fl aps toward the inside
Fold the fl aps of the leg to the outside
Glue the wings to the plane of the legs of the table
Small Table
Table
Assembling: 2 minutes
Assembling: 3 minutes
Paste between themthe central partslegs.Do the same for the plan of the table
Folding the fl aps toward the inside
Fold the fl aps of the leg to the outside
Glue the wings to the plane of the legs of the table
Glue the middle with glue hot
Fold the sidesstructure
Glue the legs with hot glue
Folding the fl aps toward the inside (8 fi ns 4 per side)
Put the glue on the fi ns (on the side you see)
Bending the legs and hold so that the fl aps sticking
parte centralegamba
Inclined Table
A bulletin board with a large display surface for graphics, paintings and objects.
A product for every angle.
60 cm x 200 cm x h 85 cm
Small Table
A place for conversation or negotiations.It prefectly matches with Chair and Stool.
Neither water proof or stain proof, but for sure the more ecological and cheap.A real deal!
58 cm x 58 cm x h 70 cm
Table
A real working plan, solid and capable of supporting up to 30 static kilograms.Available in various heights and lengths.
You might not dance dance on it,but it will work very well for any dinner, trade show or event.A toast for the planet!
60 cm x 100 cm x h 75 cm60 cm x 150 cm x h 75 cm60 cm x 200 cm x h 75 cm
60 cm x 100 cm x h 115 cm60 cm x 150 cm x h 115 cm60 cm x 200 cm x h 115 cm
page 8
page 6
page 7
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Inclined Table
Assembling: 3 minutes
Paste between themthe central partslegs.Do the same for the plan of the table
Folding the fl aps toward the inside
Fold the fl aps of the leg to the outside
Glue the wings to the plane of the legs of the table
Small Table
Table
Assembling: 2 minutes
Assembling: 3 minutes
Paste between themthe central partslegs.Do the same for the plan of the table
Folding the fl aps toward the inside
Fold the fl aps of the leg to the outside
Glue the wings to the plane of the legs of the table
Glue the middle with glue hot
Fold the sidesstructure
Glue the legs with hot glue
Folding the fl aps toward the inside (8 fi ns 4 per side)
Put the glue on the fi ns (on the side you see)
Bending the legs and hold so that the fl aps sticking
parte centralegamba
Signal
Front Wall
Vertical signaling element, the shape allows infi nite combinations: from perfect hexagons to irregular compositions, according to fancy.
Don’t lose your way at your own event...
40 cm x 40 cm x h 195 cm
10 cm x 100 cm x h 200 cm
Tripod
Folds up to become fl at, but when you need them a couple of these tripods can hold a rubust glass or wooden surface.
Basic and useful.
The price is intended for two pieces.This product can be assembled and disassembled without glue.
40 cm x 70 cm x h 70 cm
Designed to form sigle-sided or double-sided continuous walls.
There are no high walls to keep cardboard out!
The walls are not self-supporting, they must always be jointed with appropriate angles.
This product can be assembled and disassembled without glue.
page 10
page 11
page 9
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Signal
Front Wall
Assembling: 1 minute
Assembling: 1 minute
Glue together tongue and hand
Fold the tab inward Lift and rotate the structure
Glue the wings at the base
Folding the fl aps toward the inside
Lift and rotate the structure
Tripod
Assembling: 30 seconds
Fold the lower structure
Slide the elements within the structure less
Signal
Front Wall
Vertical signaling element, the shape allows infi nite combinations: from perfect hexagons to irregular compositions, according to fancy.
Don’t lose your way at your own event...
40 cm x 40 cm x h 195 cm
10 cm x 100 cm x h 200 cm
Tripod
Folds up to become fl at, but when you need them a couple of these tripods can hold a rubust glass or wooden surface.
Basic and useful.
The price is intended for two pieces.This product can be assembled and disassembled without glue.
40 cm x 70 cm x h 70 cm
Designed to form sigle-sided or double-sided continuous walls.
There are no high walls to keep cardboard out!
The walls are not self-supporting, they must always be jointed with appropriate angles.
This product can be assembled and disassembled without glue.
page 10
page 11
page 9
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Signal
Front Wall
Assembling: 1 minute
Assembling: 1 minute
Glue together tongue and hand
Fold the tab inward Lift and rotate the structure
Glue the wings at the base
Folding the fl aps toward the inside
Lift and rotate the structure
Tripod
Assembling: 30 seconds
Fold the lower structure
Slide the elements within the structure less
Signal
Front Wall
Vertical signaling element, the shape allows infi nite combinations: from perfect hexagons to irregular compositions, according to fancy.
Don’t lose your way at your own event...
40 cm x 40 cm x h 195 cm
10 cm x 100 cm x h 200 cm
Tripod
Folds up to become fl at, but when you need them a couple of these tripods can hold a rubust glass or wooden surface.
Basic and useful.
The price is intended for two pieces.This product can be assembled and disassembled without glue.
40 cm x 70 cm x h 70 cm
Designed to form sigle-sided or double-sided continuous walls.
There are no high walls to keep cardboard out!
The walls are not self-supporting, they must always be jointed with appropriate angles.
This product can be assembled and disassembled without glue.
page 10
page 11
page 9
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Signal
Front Wall
Assembling: 1 minute
Assembling: 1 minute
Glue together tongue and hand
Fold the tab inward Lift and rotate the structure
Glue the wings at the base
Folding the fl aps toward the inside
Lift and rotate the structure
Tripod
Assembling: 30 seconds
Fold the lower structure
Slide the elements within the structure less
Rear Wall
Computer Panel
Interactive kiosk with monitor compartment and front working table.The ideal solution for interaction.
An unusual marriage between chip and cheap!Welcome to the cardboard era!
Monitor hole not provided, up to 22 inches.
10 cm x 100 cm x h 200 cm
40 cm x 60 cm x h 200 cm
Panel
Self-supporting element for graphics and frames that can be used several times. Designed to dislay up to 80 cm, it can also be used to create separations or paths.
Working has never been so easy!
This product can be assembled and disassembled without glue.
32 cm x 90 cm x h 195 cm
Designed to form sigle-sided or double-sided continuous walls.
There are no high walls to keep cardboard out!
The walls are not self-supporting, they must always be jointed with appropriate angles.
This product can be assembled and disassembled without glue.
page 14
page 12
page 13
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Rear Wall
Computer Panel
Assembling: 1 minute
Assembling: 4 minutes
Folding the fl aps toward the inside
Lift and rotatethe structure
Fold the panelon the fl oor
Paste the fastening element asin design
Insert the tubes into the holes and secure with the sticks
Lift and rotatethe structure
Panel
Assembling: 1 minute
Insert the tubes into the holes
Fold the panelon the fl oor
Fix the pipes with poles
Lift and rotatethe structure
Rear Wall
Computer Panel
Interactive kiosk with monitor compartment and front working table.The ideal solution for interaction.
An unusual marriage between chip and cheap!Welcome to the cardboard era!
Monitor hole not provided, up to 22 inches.
10 cm x 100 cm x h 200 cm
40 cm x 60 cm x h 200 cm
Panel
Self-supporting element for graphics and frames that can be used several times. Designed to dislay up to 80 cm, it can also be used to create separations or paths.
Working has never been so easy!
This product can be assembled and disassembled without glue.
32 cm x 90 cm x h 195 cm
Designed to form sigle-sided or double-sided continuous walls.
There are no high walls to keep cardboard out!
The walls are not self-supporting, they must always be jointed with appropriate angles.
This product can be assembled and disassembled without glue.
page 14
page 12
page 13
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Rear Wall
Computer Panel
Assembling: 1 minute
Assembling: 4 minutes
Folding the fl aps toward the inside
Lift and rotatethe structure
Fold the panelon the fl oor
Paste the fastening element asin design
Insert the tubes into the holes and secure with the sticks
Lift and rotatethe structure
Panel
Assembling: 1 minute
Insert the tubes into the holes
Fold the panelon the fl oor
Fix the pipes with poles
Lift and rotatethe structure
Rear Wall
Computer Panel
Interactive kiosk with monitor compartment and front working table.The ideal solution for interaction.
An unusual marriage between chip and cheap!Welcome to the cardboard era!
Monitor hole not provided, up to 22 inches.
10 cm x 100 cm x h 200 cm
40 cm x 60 cm x h 200 cm
Panel
Self-supporting element for graphics and frames that can be used several times. Designed to dislay up to 80 cm, it can also be used to create separations or paths.
Working has never been so easy!
This product can be assembled and disassembled without glue.
32 cm x 90 cm x h 195 cm
Designed to form sigle-sided or double-sided continuous walls.
There are no high walls to keep cardboard out!
The walls are not self-supporting, they must always be jointed with appropriate angles.
This product can be assembled and disassembled without glue.
page 14
page 12
page 13
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Rear Wall
Computer Panel
Assembling: 1 minute
Assembling: 4 minutes
Folding the fl aps toward the inside
Lift and rotatethe structure
Fold the panelon the fl oor
Paste the fastening element asin design
Insert the tubes into the holes and secure with the sticks
Lift and rotatethe structure
Panel
Assembling: 1 minute
Insert the tubes into the holes
Fold the panelon the fl oor
Fix the pipes with poles
Lift and rotatethe structure
Wardrobe
Suitable for temporary shops and showrooms, this folding container can be used as a wardrobe or cabinet with shelves at different heights.
Your fashion collection in a box.
Three shelves included.This product can be assembled and disassembled without glue.
41 cm x 100 cm x h 171 cm
Library
Exibition module with great function/price ratio.
Our library is not oak but humble cardboard.Will hold all the weight of the culture with which you want to load it.
The image represents a series of product
40 cm x 100 cm x h 40 cm
Shelf
39 cm x 198 cm x h 200 cm
Ideal solution for showrooms, travel agencies, temporary shops.
Perfect display for magazines, catalogs, shoes and many other things you will only discover trying it.
page 17
page 15
page 16
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Wardrobe
Assembling: 4 minutes
Fold the two shoulders Folding the top and bottom
Slide the upper and lower parts inside of the shoulders, incastare the tabs and enter the tube in the holes
Fold and fi t the shelves at the desired
Fix the pipes with poles
Library
Assembling: 2 minutes
Glue the two outer legs with glue hot
Fold the sides of the structure
Bend the two legs 90 °
Glue the fi ns broken leg on the fl oor of support
Paste the central part Glue the wings legs
Shelf
Fold all the parts except the fold towards the inside with the red line that should be folded in the opposite direction compared to other
Glue the tab located on the inside with the adjacent side
Fold the parts inward, forming a triangle
Place vertically the two totem poles with holes as per drawing. The two specular totem have holes to allow the insertion of the shelves
Assembling: 3 minutes
Slide the elements within the two totems, fi rst in a totem and then another
Fold according to this scheme.To make easier the insertion of the shelves in totem paste the tab to the adjacent side
Wardrobe
Suitable for temporary shops and showrooms, this folding container can be used as a wardrobe or cabinet with shelves at different heights.
Your fashion collection in a box.
Three shelves included.This product can be assembled and disassembled without glue.
41 cm x 100 cm x h 171 cm
Library
Exibition module with great function/price ratio.
Our library is not oak but humble cardboard.Will hold all the weight of the culture with which you want to load it.
The image represents a series of product
40 cm x 100 cm x h 40 cm
Shelf
39 cm x 198 cm x h 200 cm
Ideal solution for showrooms, travel agencies, temporary shops.
Perfect display for magazines, catalogs, shoes and many other things you will only discover trying it.
page 17
page 15
page 16
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Wardrobe
Assembling: 4 minutes
Fold the two shoulders Folding the top and bottom
Slide the upper and lower parts inside of the shoulders, incastare the tabs and enter the tube in the holes
Fold and fi t the shelves at the desired
Fix the pipes with poles
Library
Assembling: 2 minutes
Glue the two outer legs with glue hot
Fold the sides of the structure
Bend the two legs 90 °
Glue the fi ns broken leg on the fl oor of support
Paste the central part Glue the wings legs
Shelf
Fold all the parts except the fold towards the inside with the red line that should be folded in the opposite direction compared to other
Glue the tab located on the inside with the adjacent side
Fold the parts inward, forming a triangle
Place vertically the two totem poles with holes as per drawing. The two specular totem have holes to allow the insertion of the shelves
Assembling: 3 minutes
Slide the elements within the two totems, fi rst in a totem and then another
Fold according to this scheme.To make easier the insertion of the shelves in totem paste the tab to the adjacent side
Wardrobe
Suitable for temporary shops and showrooms, this folding container can be used as a wardrobe or cabinet with shelves at different heights.
Your fashion collection in a box.
Three shelves included.This product can be assembled and disassembled without glue.
41 cm x 100 cm x h 171 cm
Library
Exibition module with great function/price ratio.
Our library is not oak but humble cardboard.Will hold all the weight of the culture with which you want to load it.
The image represents a series of product
40 cm x 100 cm x h 40 cm
Shelf
39 cm x 198 cm x h 200 cm
Ideal solution for showrooms, travel agencies, temporary shops.
Perfect display for magazines, catalogs, shoes and many other things you will only discover trying it.
page 17
page 15
page 16
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Wardrobe
Assembling: 4 minutes
Fold the two shoulders Folding the top and bottom
Slide the upper and lower parts inside of the shoulders, incastare the tabs and enter the tube in the holes
Fold and fi t the shelves at the desired
Fix the pipes with poles
Library
Assembling: 2 minutes
Glue the two outer legs with glue hot
Fold the sides of the structure
Bend the two legs 90 °
Glue the fi ns broken leg on the fl oor of support
Paste the central part Glue the wings legs
Shelf
Fold all the parts except the fold towards the inside with the red line that should be folded in the opposite direction compared to other
Glue the tab located on the inside with the adjacent side
Fold the parts inward, forming a triangle
Place vertically the two totem poles with holes as per drawing. The two specular totem have holes to allow the insertion of the shelves
Assembling: 3 minutes
Slide the elements within the two totems, fi rst in a totem and then another
Fold according to this scheme.To make easier the insertion of the shelves in totem paste the tab to the adjacent side
Clip
Clip to joint the modules of the Geodesic Sphere and Front and Rear Walls. Useful also to hag graphics, frames and light objects.
Clip have to be provided to join the Walls both in the lower and higher part.
Hanger
An accessory in two pieces for your installations.
Use it as you like, but use it!
This product can be assembled and disassembled without glue.
60 cm x 60 cm x h 180 cm
Geodesic Sphere
It has thousands of uses: a stock for emergency, a game, a shelter for the privacy of our visitors, human and not.
An eco-futuristic look for your events.
* fi rst row of hexagons and pentagons need to be cut (see instructions).For every Sphere 56 Clip, not included.This product can be assembled and disassembled without glue.
220 cm x 220 cm x h 160 cm
page 20
page 18
page 19
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Hot Glue Gun
Indispensable tool to assemble cardboard furniture. The gun melts a glue stick in a few minutes.
Refi lls needed to assemble all the pieces are included.
Hanger
Assembling: 1 minute
Fold the fl apsto the outside
Slide the two elements and foldthe wings in their seats
Geodesic Sphere
Assembling: 20 minutes
Fold the fl aps of the six pentagons upward
Fold the fl aps of the nine hexagons upward
Scheme to combineeach hexagon and pentagons
Joining with fi nsthe grippers central
Cut in half four pentagons that touch the ground
* The cut is to cure customer
1
2
3
4
5
6
Clip
Clip to joint the modules of the Geodesic Sphere and Front and Rear Walls. Useful also to hag graphics, frames and light objects.
Clip have to be provided to join the Walls both in the lower and higher part.
Hanger
An accessory in two pieces for your installations.
Use it as you like, but use it!
This product can be assembled and disassembled without glue.
60 cm x 60 cm x h 180 cm
Geodesic Sphere
It has thousands of uses: a stock for emergency, a game, a shelter for the privacy of our visitors, human and not.
An eco-futuristic look for your events.
* fi rst row of hexagons and pentagons need to be cut (see instructions).For every Sphere 56 Clip, not included.This product can be assembled and disassembled without glue.
220 cm x 220 cm x h 160 cm
page 20
page 18
page 19
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Hot Glue Gun
Indispensable tool to assemble cardboard furniture. The gun melts a glue stick in a few minutes.
Refi lls needed to assemble all the pieces are included.
Hanger
Assembling: 1 minute
Fold the fl apsto the outside
Slide the two elements and foldthe wings in their seats
Geodesic Sphere
Assembling: 20 minutes
Fold the fl aps of the six pentagons upward
Fold the fl aps of the nine hexagons upward
Scheme to combineeach hexagon and pentagons
Joining with fi nsthe grippers central
Cut in half four pentagons that touch the ground
* The cut is to cure customer
1
2
3
4
5
6
Clip
Clip to joint the modules of the Geodesic Sphere and Front and Rear Walls. Useful also to hag graphics, frames and light objects.
Clip have to be provided to join the Walls both in the lower and higher part.
Hanger
An accessory in two pieces for your installations.
Use it as you like, but use it!
This product can be assembled and disassembled without glue.
60 cm x 60 cm x h 180 cm
Geodesic Sphere
It has thousands of uses: a stock for emergency, a game, a shelter for the privacy of our visitors, human and not.
An eco-futuristic look for your events.
* fi rst row of hexagons and pentagons need to be cut (see instructions).For every Sphere 56 Clip, not included.This product can be assembled and disassembled without glue.
220 cm x 220 cm x h 160 cm
page 20
page 18
page 19
www.mobilicartone.it
www.mobilicartone.it
www.mobilicartone.it
Hot Glue Gun
Indispensable tool to assemble cardboard furniture. The gun melts a glue stick in a few minutes.
Refi lls needed to assemble all the pieces are included.
Hanger
Assembling: 1 minute
Fold the fl apsto the outside
Slide the two elements and foldthe wings in their seats
Geodesic Sphere
Assembling: 20 minutes
Fold the fl aps of the six pentagons upward
Fold the fl aps of the nine hexagons upward
Scheme to combineeach hexagon and pentagons
Joining with fi nsthe grippers central
Cut in half four pentagons that touch the ground
* The cut is to cure customer
1
2
3
4
5
6
This print respects the environment and didin’t produce CO2: this papaer has been produced with post-consumer recycled fi bers.The thermal energy used to produce this paper has been compensated and it’s completely “No Impact”.
This print respects the environment and didin’t produce CO2: this papaer has been produced with post-consumer recycled fi bers.The thermal energy used to produce this paper has been compensated and it’s completely “No Impact”.
* 4x4 Exhibition with 7 Front Walls, 6 Libraries, 3 Signals, 3 Chairs, 1 Table, packing and transport included
FaqIs the Cardboard Furniture fi reproof?No, it’s not, but if you want to use them in fairs or events where certifi cation is required, it will simply increase the fi re load. However, the volume per square meter is so low that it never turns into a problem.
Is it waterproof?No, if cardboard is placed in humid conditions or outdoor loses its natural fi ber.
Can I use it outdoors?It’s your choice, if it rains of course it will loose its static characteristics.
Is it durable?We recommend using it for fairs, exhibitions and temporary events. If stored properly in dry places it can be reused.Is it disassemblable and reassemblable after use?Yes in the case of Panels, Chair and Geodesic Sphere,
in other cases, some users cut the glue with a knife to bring the cardboard sheet to plan, however, is never a clean job and you risk to lose stability.
How much weight does it hold?The tables are tested to around 30 kg of static load, this means that if you put on anything that moves is very likely that the table moves, in this case we suggest you put it against a wall or to fi x it to the fl oor or to another piece of cardboard furniture. The stool is tested for 90 to 100 pounds of distributed weight. In any case, all the all the sharp objects are a problem.
Can I make it stronger?In some cases we decide to wrap the table legs or stools with tape as a skirting to protect them in case of fl oor cleaning with solvents or water close to the furniture or simply to have more stability.
Can I have the pieces already assembled?Yes, in this case does not use e-commerce, but call us,
we will solve your problem.
Can I collect them directly?Yes, in this case does not use e-commerce, but call us, we will solve your problem.
Can you customize the size?Yes, but for numbers greater than 100 pieces, or by paying a surcharge, call for specifi cations.
Can I customize graphics?You can use prespaced stickers, pvc sticker prints, prints on foamcore ® with double-affi xed adhesive or pins. Generally we do not provide customization, but for sure we can help you fi nd the best solution.
Where and how do I get an invoice?The name Cardboard Furniture and product name of ZonaUno®, you will receive an invoice including VAT and postage to the e-mail submitted in the form of payment.
This print respects the environment and didin’t produce CO2: this papaer has been produced with post-consumer recycled fi bers.The thermal energy used to produce this paper has been compensated and it’s completely “No Impact”.
www.mobilicartone.it
Technical Specifi cationsConditioning: 23°C air t. & 50% r.h. 24h - I.S.O. Standard 187Composition: KSFSK/56265/BC
General Information Unity
Thickness mm 7,0
Basis Weight g/m2 870Pounds for sqare feet IbsxM ft2 178
Bursting strenght in kilopascal kPa 1086Mullen Test - Customary value - Pounds-force for square inch Ibf/in2 157
Edge crush testMinimum - E.C.T. kN/m 8,93E.C.T. Verifi ed on latest productions - E.C.T. kN/m 10,2Vertical compression in pounds per inch - E.C.T. Ibs x inch 58,3
Cobb method 30 mins - Cobb g/m2 <155Valore verifi cato su ultime produzioni - Actual Value g/m2 99
www.mobilicartone.it
FaqCan I rent them?No, we don’t do renting for the “use and recycle” nature of the material.
The carrier has not arrived, what should I do?Call us, we will attempt to solve the problem, courier shipments are never 100% guaranteed, sometimes something goes wrong, we are sorry it happened in your case.
The e-Commerce platform didn’t confi rm the order, what should I do?Call or write us, we will be able to tell if your order has been processed or not.
It was not what I expected, what should I do?Do not accept the Furniture from the carrier, if you pick up and sign we will not accept returns.
How long will it take to arrive?
The time required for the production has a range from a minimum of 10 to a maximum of 15 days from your order, in relation to stock availability, and quantities of items ordered.
Are they recyclable?Cardboard is a 100% recyclable material, please use proper recycle bins and not throw the Furniture in the normal garbage.
Are they recycled?Yes, the triple cardboard is a 80% recycled material.
How can I calculate the fi re load?The regulations of most events require that the fi re load per square meter, considering both the material of construction and the display, should not exceed 50 kg / sq m of “wood equivalent”.The fi re load is expressed by the equivalent amount of wood per square meter, which is obtained by dividing by 4.4 Mcal / kg (gross calorifi c value of wood), the
calories per unit of horizontal surface of the room, which at most can be developed for effect of the combustion of all combustible materials present. Usually Cardboard Furniture should have a very little impact on the fi re load (0.4 / 0.5 kg / sqm out of 50 kg / sqm).
Technical Specifi cationsGeneral Informations Method
Thickness FEFCO n° 3
Basis Weight UNI EN 536Pounds for square feet APPIT 410
Bursting strenght in kilopascal I.S.O. 2759
Edge crush testMinimum - E.C.T. I.S.O. 3037E.C.T. Verifi ed on latest productions - E.C.T. I.S.O. 3037Vertical compression in pounds per inch - E.C.T. I.S.O. 3037
Cobb method 30 mins - Cobb I.S.O. 535 Top&Back sideVerifi ed on latest productions - Actual Value I.S.O. 535 Top side
Heating power: 17 Megajoule/kg 84,07 Mega Calories/kg)
* 4x4 Exhibition with 7 Front Walls, 6 Libraries, 3 Signals, 3 Chairs, 1 Table, packing and transport included
This print respects the environment and didin’t produce CO2: this papaer has been produced with post-consumer recycled fi bers.The thermal energy used to produce this paper has been compensated and it’s completely “No Impact”.
This print respects the environment and didin’t produce CO2: this papaer has been produced with post-consumer recycled fi bers.The thermal energy used to produce this paper has been compensated and it’s completely “No Impact”.
FaqIs the Cardboard Furniture fi reproof?No, it’s not, but if you want to use them in fairs or events where certifi cation is required, it will simply increase the fi re load. However, the volume per square meter is so low that it never turns into a problem.
Is it waterproof?No, if cardboard is placed in humid conditions or outdoor loses its natural fi ber.
Can I use it outdoors?It’s your choice, if it rains of course it will loose its static characteristics.
Is it durable?We recommend using it for fairs, exhibitions and temporary events. If stored properly in dry places it can be reused.Is it disassemblable and reassemblable after use?Yes in the case of Panels, Chair and Geodesic Sphere,
in other cases, some users cut the glue with a knife to bring the cardboard sheet to plan, however, is never a clean job and you risk to lose stability.
How much weight does it hold?The tables are tested to around 30 kg of static load, this means that if you put on anything that moves is very likely that the table moves, in this case we suggest you put it against a wall or to fi x it to the fl oor or to another piece of cardboard furniture. The stool is tested for 90 to 100 pounds of distributed weight. In any case, all the all the sharp objects are a problem.
Can I make it stronger?In some cases we decide to wrap the table legs or stools with tape as a skirting to protect them in case of fl oor cleaning with solvents or water close to the furniture or simply to have more stability.
Can I have the pieces already assembled?Yes, in this case does not use e-commerce, but call us,
we will solve your problem.
Can I collect them directly?Yes, in this case does not use e-commerce, but call us, we will solve your problem.
Can you customize the size?Yes, but for numbers greater than 100 pieces, or by paying a surcharge, call for specifi cations.
Can I customize graphics?You can use prespaced stickers, pvc sticker prints, prints on foamcore ® with double-affi xed adhesive or pins. Generally we do not provide customization, but for sure we can help you fi nd the best solution.
Where and how do I get an invoice?The name Cardboard Furniture and product name of ZonaUno®, you will receive an invoice including VAT and postage to the e-mail submitted in the form of payment.
This print respects the environment and didin’t produce CO2: this papaer has been produced with post-consumer recycled fi bers.The thermal energy used to produce this paper has been compensated and it’s completely “No Impact”.
www.mobilicartone.it
Technical Specifi cationsConditioning: 23°C air t. & 50% r.h. 24h - I.S.O. Standard 187Composition: KSFSK/56265/BC
General Information Unity
Thickness mm 7,0
Basis Weight g/m2 870Pounds for sqare feet IbsxM ft2 178
Bursting strenght in kilopascal kPa 1086Mullen Test - Customary value - Pounds-force for square inch Ibf/in2 157
Edge crush testMinimum - E.C.T. kN/m 8,93E.C.T. Verifi ed on latest productions - E.C.T. kN/m 10,2Vertical compression in pounds per inch - E.C.T. Ibs x inch 58,3
Cobb method 30 mins - Cobb g/m2 <155Valore verifi cato su ultime produzioni - Actual Value g/m2 99
www.mobilicartone.it
FaqCan I rent them?No, we don’t do renting for the “use and recycle” nature of the material.
The carrier has not arrived, what should I do?Call us, we will attempt to solve the problem, courier shipments are never 100% guaranteed, sometimes something goes wrong, we are sorry it happened in your case.
The e-Commerce platform didn’t confi rm the order, what should I do?Call or write us, we will be able to tell if your order has been processed or not.
It was not what I expected, what should I do?Do not accept the Furniture from the carrier, if you pick up and sign we will not accept returns.
How long will it take to arrive?
The time required for the production has a range from a minimum of 10 to a maximum of 15 days from your order, in relation to stock availability, and quantities of items ordered.
Are they recyclable?Cardboard is a 100% recyclable material, please use proper recycle bins and not throw the Furniture in the normal garbage.
Are they recycled?Yes, the triple cardboard is a 80% recycled material.
How can I calculate the fi re load?The regulations of most events require that the fi re load per square meter, considering both the material of construction and the display, should not exceed 50 kg / sq m of “wood equivalent”.The fi re load is expressed by the equivalent amount of wood per square meter, which is obtained by dividing by 4.4 Mcal / kg (gross calorifi c value of wood), the
calories per unit of horizontal surface of the room, which at most can be developed for effect of the combustion of all combustible materials present. Usually Cardboard Furniture should have a very little impact on the fi re load (0.4 / 0.5 kg / sqm out of 50 kg / sqm).
Technical Specifi cationsGeneral Informations Method
Thickness FEFCO n° 3
Basis Weight UNI EN 536Pounds for square feet APPIT 410
Bursting strenght in kilopascal I.S.O. 2759
Edge crush testMinimum - E.C.T. I.S.O. 3037E.C.T. Verifi ed on latest productions - E.C.T. I.S.O. 3037Vertical compression in pounds per inch - E.C.T. I.S.O. 3037
Cobb method 30 mins - Cobb I.S.O. 535 Top&Back sideVerifi ed on latest productions - Actual Value I.S.O. 535 Top side
Heating power: 17 Megajoule/kg 84,07 Mega Calories/kg)
FaqCan I rent them?No, we don’t do renting for the “use and recycle” nature of the material.
The carrier has not arrived, what should I do?Call us, we will attempt to solve the problem, courier shipments are never 100% guaranteed, sometimes something goes wrong, we are sorry it happened in your case.
The e-Commerce platform didn’t confi rm the order, what should I do?Call or write us, we will be able to tell if your order has been processed or not.
It was not what I expected, what should I do?Do not accept the Furniture from the carrier, if you pick up and sign we will not accept returns.
How long will it take to arrive?
The time required for the production has a range from a minimum of 10 to a maximum of 15 days from your order, in relation to stock availability, and quantities of items ordered.
Are they recyclable?Cardboard is a 100% recyclable material, please use proper recycle bins and not throw the Furniture in the normal garbage.
Are they recycled?Yes, the triple cardboard is a 80% recycled material.
How can I calculate the fi re load?The regulations of most events require that the fi re load per square meter, considering both the material of construction and the display, should not exceed 50 kg / sq m of “wood equivalent”.The fi re load is expressed by the equivalent amount of wood per square meter, which is obtained by dividing by 4.4 Mcal / kg (gross calorifi c value of wood), the
calories per unit of horizontal surface of the room, which at most can be developed for effect of the combustion of all combustible materials present. Usually Cardboard Furniture should have a very little impact on the fi re load (0.4 / 0.5 kg / sqm out of 50 kg / sqm).
Technical Specifi cationsGeneral Informations Method
Thickness FEFCO n° 3
Basis Weight UNI EN 536Pounds for square feet APPIT 410
Bursting strenght in kilopascal I.S.O. 2759
Edge crush testMinimum - E.C.T. I.S.O. 3037E.C.T. Verifi ed on latest productions - E.C.T. I.S.O. 3037Vertical compression in pounds per inch - E.C.T. I.S.O. 3037
Cobb method 30 mins - Cobb I.S.O. 535 Top&Back sideVerifi ed on latest productions - Actual Value I.S.O. 535 Top side
Heating power: 17 Megajoule/kg 84,07 Mega Calories/kg)