carbuncle - square-enix-games.com · fold out the inner edges to the adjacent crease and open the...

Start with a square coloured side up.

CARBUNCLE

© 2010 - 2017 SQUARE ENIX CO., LTD. All Rights Reserved. NOT FOR SALE.STORMBLOOD, HEAVENSWARD and A REALM REBORN are registered trademarks or trademarks of Square Enix Co., Ltd.

FINAL FANTASY, FINAL FANTASY XIV, FFXIV, SQUARE ENIX and the SQUARE ENIX logo are registered trademarks or trademarks of Square Enix Holdings Co., Ltd.

Diagrams © 2017 Creaselightning Limited www.creaselightning.co.uk

1 32

Fold and unfold the square in half lengthwise and diagonally along all

axes.

4 65

Fold the lower corner up to touch the vertical middle crease. The

fold starts from the opposite corner.

Fold the edge back down to the lower folded edge.

Unfold the model back to a square. (Step 2).

25

Fold the outer edge in to the crease made previously.

Fold and unfold the outer edge aligned with the crease. Then

unfold back to a square.

10 11 12

Fold the corner up, separate the layers and squash the point flat.

Fold and unfold the outer folded edges in.

Fold the upper layer up and fold the edge of the lower section out

along the creases made previously

9

Fold the edge up diagonally and fold the right side in.

7 8

Fold and unfold the upper and lower edges in along the points where the creases intersect. This divides the

paper into three parts.

Fold the upper edge down.

Fold and unfold the upper corners in diagonally.

Fold the corner back over. Fold the corner up, separate the layers and squash it flat.

Fold the lower edge up and reverse fold the corner inside.

Fold the point over and fold the sides in. This will make a bird base

shape.

Fold the next layer over causing the corners in the layer beneath to fold

in.

13 14 15

16 17 18




Fold out the inner edges to the adjacent crease and open the point.

Fold the corners back. Fold and unfold the upper layer of the corners.

19 20 21

Fold the corners behind and beneath the upper layer.

Fold and unfold the model diagonally along both axes.

Fold and unfold the edges in to the middle.

Fold and unfold the edges in to the middle.

Fold the corner over.

25 26 27

Fold over the upper layer of the corners opening out the paper.

22 23 24

Fold the corner in and re fold the creases made

previously.

28 29 30

Fold and unfold the outer corners in along the points

where the creases intersect.

Turn the model over, left to right.




31 32 33

34

37

35

38

36

39

Fold the upper corner behind and into the model.

Fold the lower section up, folding the model in half.

Fold and unfold the outer edges in to the middle.

Fold the tip of the folded corner behind.

Fold the upper section back by folding the middle section in half.

Fold the corner over, the point should touch the outer edge.

Fold the sides of the point together and fold it over.

Repeat steps 30 to 33 on the other corner.

(30-33)



40 4142

Fold the point in.Fold the edges of the lower section in and fold the upper section in

diagonally on both sides.




43 44 45

46

49

52

47

50

53

48

51

54

Fold the lower section up and back again.

Repeat steps 42 to 42 on the other point.

Hold the model where indicated and slide the tail up.

Fold up the upper edge of the ear to open it. Some of this fold is

beneath the head. Repeat behind.

Pinch the legs and the ears to shape the model.

Hold the front section and slide the rear section inside making a crimp

fold.

Fold out the paper trapped inside the tail.

Complete.

Fold the point back again.

Fold the upper section in together. At the same time fold the model in half lengthwise. The next step shows a

side view.

Fold the lower edges of the body in front and behind. Then Slide the

head out slightly and the ears back.

Curl the rear three points to shape the tail.

(42-43)




Carbuncle




Cut out the square to make the model.




CarbuncleCut out the square to make the model.

carbuncle - square-enix-games.com · fold out the inner edges to the adjacent crease and open the...

Documents